1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2016 Linaro Ltd. 4 */ 5 6 #include <linux/device.h> 7 #include <linux/usb/chipidea.h> 8 #include <linux/ulpi/interface.h> 9 10 #include "ci.h" 11 12 #define ULPI_WAKEUP BIT(31) 13 #define ULPI_RUN BIT(30) 14 #define ULPI_WRITE BIT(29) 15 #define ULPI_SYNC_STATE BIT(27) 16 #define ULPI_ADDR(n) ((n) << 16) 17 #define ULPI_DATA(n) (n) 18 19 static int ci_ulpi_wait(struct ci_hdrc *ci, u32 mask) 20 { 21 unsigned long usec = 10000; 22 23 while (usec--) { 24 if (!hw_read(ci, OP_ULPI_VIEWPORT, mask)) 25 return 0; 26 27 udelay(1); 28 } 29 30 return -ETIMEDOUT; 31 } 32 33 static int ci_ulpi_read(struct device *dev, u8 addr) 34 { 35 struct ci_hdrc *ci = dev_get_drvdata(dev); 36 int ret; 37 38 hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); 39 ret = ci_ulpi_wait(ci, ULPI_WAKEUP); 40 if (ret) 41 return ret; 42 43 hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_ADDR(addr)); 44 ret = ci_ulpi_wait(ci, ULPI_RUN); 45 if (ret) 46 return ret; 47 48 return hw_read(ci, OP_ULPI_VIEWPORT, GENMASK(15, 8)) >> 8; 49 } 50 51 static int ci_ulpi_write(struct device *dev, u8 addr, u8 val) 52 { 53 struct ci_hdrc *ci = dev_get_drvdata(dev); 54 int ret; 55 56 hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); 57 ret = ci_ulpi_wait(ci, ULPI_WAKEUP); 58 if (ret) 59 return ret; 60 61 hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, 62 ULPI_RUN | ULPI_WRITE | ULPI_ADDR(addr) | val); 63 return ci_ulpi_wait(ci, ULPI_RUN); 64 } 65 66 int ci_ulpi_init(struct ci_hdrc *ci) 67 { 68 if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) 69 return 0; 70 71 72 ci->ulpi_ops.read = ci_ulpi_read; 73 ci->ulpi_ops.write = ci_ulpi_write; 74 ci->ulpi = ulpi_register_interface(ci->dev, &ci->ulpi_ops); 75 if (IS_ERR(ci->ulpi)) 76 dev_err(ci->dev, "failed to register ULPI interface"); 77 78 return PTR_ERR_OR_ZERO(ci->ulpi); 79 } 80 81 void ci_ulpi_exit(struct ci_hdrc *ci) 82 { 83 if (ci->ulpi) { 84 ulpi_unregister_interface(ci->ulpi); 85 ci->ulpi = NULL; 86 } 87 } 88 89 int ci_ulpi_resume(struct ci_hdrc *ci) 90 { 91 int cnt = 100000; 92 93 if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) 94 return 0; 95 96 while (cnt-- > 0) { 97 if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) 98 return 0; 99 udelay(1); 100 } 101 102 return -ETIMEDOUT; 103 } 104