1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * core.c - ChipIdea USB IP core family device controller 4 * 5 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. 6 * Copyright (C) 2020 NXP 7 * 8 * Author: David Lopo 9 * Peter Chen <peter.chen@nxp.com> 10 * 11 * Main Features: 12 * - Four transfers are supported, usbtest is passed 13 * - USB Certification for gadget: CH9 and Mass Storage are passed 14 * - Low power mode 15 * - USB wakeup 16 */ 17 #include <linux/delay.h> 18 #include <linux/device.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/extcon.h> 21 #include <linux/phy/phy.h> 22 #include <linux/platform_device.h> 23 #include <linux/module.h> 24 #include <linux/idr.h> 25 #include <linux/interrupt.h> 26 #include <linux/io.h> 27 #include <linux/kernel.h> 28 #include <linux/slab.h> 29 #include <linux/pm_runtime.h> 30 #include <linux/pinctrl/consumer.h> 31 #include <linux/usb/ch9.h> 32 #include <linux/usb/gadget.h> 33 #include <linux/usb/otg.h> 34 #include <linux/usb/chipidea.h> 35 #include <linux/usb/of.h> 36 #include <linux/of.h> 37 #include <linux/regulator/consumer.h> 38 #include <linux/usb/ehci_def.h> 39 40 #include "ci.h" 41 #include "udc.h" 42 #include "bits.h" 43 #include "host.h" 44 #include "otg.h" 45 #include "otg_fsm.h" 46 47 /* Controller register map */ 48 static const u8 ci_regs_nolpm[] = { 49 [CAP_CAPLENGTH] = 0x00U, 50 [CAP_HCCPARAMS] = 0x08U, 51 [CAP_DCCPARAMS] = 0x24U, 52 [CAP_TESTMODE] = 0x38U, 53 [OP_USBCMD] = 0x00U, 54 [OP_USBSTS] = 0x04U, 55 [OP_USBINTR] = 0x08U, 56 [OP_DEVICEADDR] = 0x14U, 57 [OP_ENDPTLISTADDR] = 0x18U, 58 [OP_TTCTRL] = 0x1CU, 59 [OP_BURSTSIZE] = 0x20U, 60 [OP_ULPI_VIEWPORT] = 0x30U, 61 [OP_PORTSC] = 0x44U, 62 [OP_DEVLC] = 0x84U, 63 [OP_OTGSC] = 0x64U, 64 [OP_USBMODE] = 0x68U, 65 [OP_ENDPTSETUPSTAT] = 0x6CU, 66 [OP_ENDPTPRIME] = 0x70U, 67 [OP_ENDPTFLUSH] = 0x74U, 68 [OP_ENDPTSTAT] = 0x78U, 69 [OP_ENDPTCOMPLETE] = 0x7CU, 70 [OP_ENDPTCTRL] = 0x80U, 71 }; 72 73 static const u8 ci_regs_lpm[] = { 74 [CAP_CAPLENGTH] = 0x00U, 75 [CAP_HCCPARAMS] = 0x08U, 76 [CAP_DCCPARAMS] = 0x24U, 77 [CAP_TESTMODE] = 0xFCU, 78 [OP_USBCMD] = 0x00U, 79 [OP_USBSTS] = 0x04U, 80 [OP_USBINTR] = 0x08U, 81 [OP_DEVICEADDR] = 0x14U, 82 [OP_ENDPTLISTADDR] = 0x18U, 83 [OP_TTCTRL] = 0x1CU, 84 [OP_BURSTSIZE] = 0x20U, 85 [OP_ULPI_VIEWPORT] = 0x30U, 86 [OP_PORTSC] = 0x44U, 87 [OP_DEVLC] = 0x84U, 88 [OP_OTGSC] = 0xC4U, 89 [OP_USBMODE] = 0xC8U, 90 [OP_ENDPTSETUPSTAT] = 0xD8U, 91 [OP_ENDPTPRIME] = 0xDCU, 92 [OP_ENDPTFLUSH] = 0xE0U, 93 [OP_ENDPTSTAT] = 0xE4U, 94 [OP_ENDPTCOMPLETE] = 0xE8U, 95 [OP_ENDPTCTRL] = 0xECU, 96 }; 97 98 static void hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) 99 { 100 int i; 101 102 for (i = 0; i < OP_ENDPTCTRL; i++) 103 ci->hw_bank.regmap[i] = 104 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + 105 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); 106 107 for (; i <= OP_LAST; i++) 108 ci->hw_bank.regmap[i] = ci->hw_bank.op + 109 4 * (i - OP_ENDPTCTRL) + 110 (is_lpm 111 ? ci_regs_lpm[OP_ENDPTCTRL] 112 : ci_regs_nolpm[OP_ENDPTCTRL]); 113 114 } 115 116 static enum ci_revision ci_get_revision(struct ci_hdrc *ci) 117 { 118 int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); 119 enum ci_revision rev = CI_REVISION_UNKNOWN; 120 121 if (ver == 0x2) { 122 rev = hw_read_id_reg(ci, ID_ID, REVISION) 123 >> __ffs(REVISION); 124 rev += CI_REVISION_20; 125 } else if (ver == 0x0) { 126 rev = CI_REVISION_1X; 127 } 128 129 return rev; 130 } 131 132 /** 133 * hw_read_intr_enable: returns interrupt enable register 134 * 135 * @ci: the controller 136 * 137 * This function returns register data 138 */ 139 u32 hw_read_intr_enable(struct ci_hdrc *ci) 140 { 141 return hw_read(ci, OP_USBINTR, ~0); 142 } 143 144 /** 145 * hw_read_intr_status: returns interrupt status register 146 * 147 * @ci: the controller 148 * 149 * This function returns register data 150 */ 151 u32 hw_read_intr_status(struct ci_hdrc *ci) 152 { 153 return hw_read(ci, OP_USBSTS, ~0); 154 } 155 156 /** 157 * hw_port_test_set: writes port test mode (execute without interruption) 158 * @ci: the controller 159 * @mode: new value 160 * 161 * This function returns an error code 162 */ 163 int hw_port_test_set(struct ci_hdrc *ci, u8 mode) 164 { 165 const u8 TEST_MODE_MAX = 7; 166 167 if (mode > TEST_MODE_MAX) 168 return -EINVAL; 169 170 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); 171 return 0; 172 } 173 174 /** 175 * hw_port_test_get: reads port test mode value 176 * 177 * @ci: the controller 178 * 179 * This function returns port test mode value 180 */ 181 u8 hw_port_test_get(struct ci_hdrc *ci) 182 { 183 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); 184 } 185 186 static void hw_wait_phy_stable(void) 187 { 188 /* 189 * The phy needs some delay to output the stable status from low 190 * power mode. And for OTGSC, the status inputs are debounced 191 * using a 1 ms time constant, so, delay 2ms for controller to get 192 * the stable status, like vbus and id when the phy leaves low power. 193 */ 194 usleep_range(2000, 2500); 195 } 196 197 /* The PHY enters/leaves low power mode */ 198 static void ci_hdrc_enter_lpm_common(struct ci_hdrc *ci, bool enable) 199 { 200 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; 201 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); 202 203 if (enable && !lpm) 204 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 205 PORTSC_PHCD(ci->hw_bank.lpm)); 206 else if (!enable && lpm) 207 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 208 0); 209 } 210 211 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) 212 { 213 return ci->platdata->enter_lpm(ci, enable); 214 } 215 216 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) 217 { 218 u32 reg; 219 220 /* bank is a module variable */ 221 ci->hw_bank.abs = base; 222 223 ci->hw_bank.cap = ci->hw_bank.abs; 224 ci->hw_bank.cap += ci->platdata->capoffset; 225 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); 226 227 hw_alloc_regmap(ci, false); 228 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> 229 __ffs(HCCPARAMS_LEN); 230 ci->hw_bank.lpm = reg; 231 if (reg) 232 hw_alloc_regmap(ci, !!reg); 233 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; 234 ci->hw_bank.size += OP_LAST; 235 ci->hw_bank.size /= sizeof(u32); 236 237 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> 238 __ffs(DCCPARAMS_DEN); 239 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ 240 241 if (ci->hw_ep_max > ENDPT_MAX) 242 return -ENODEV; 243 244 ci_hdrc_enter_lpm(ci, false); 245 246 /* Disable all interrupts bits */ 247 hw_write(ci, OP_USBINTR, 0xffffffff, 0); 248 249 /* Clear all interrupts status bits*/ 250 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); 251 252 ci->rev = ci_get_revision(ci); 253 254 dev_dbg(ci->dev, 255 "revision: %d, lpm: %d; cap: %px op: %px\n", 256 ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); 257 258 /* setup lock mode ? */ 259 260 /* ENDPTSETUPSTAT is '0' by default */ 261 262 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ 263 264 return 0; 265 } 266 267 void hw_phymode_configure(struct ci_hdrc *ci) 268 { 269 u32 portsc, lpm, sts = 0; 270 271 switch (ci->platdata->phy_mode) { 272 case USBPHY_INTERFACE_MODE_UTMI: 273 portsc = PORTSC_PTS(PTS_UTMI); 274 lpm = DEVLC_PTS(PTS_UTMI); 275 break; 276 case USBPHY_INTERFACE_MODE_UTMIW: 277 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; 278 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; 279 break; 280 case USBPHY_INTERFACE_MODE_ULPI: 281 portsc = PORTSC_PTS(PTS_ULPI); 282 lpm = DEVLC_PTS(PTS_ULPI); 283 break; 284 case USBPHY_INTERFACE_MODE_SERIAL: 285 portsc = PORTSC_PTS(PTS_SERIAL); 286 lpm = DEVLC_PTS(PTS_SERIAL); 287 sts = 1; 288 break; 289 case USBPHY_INTERFACE_MODE_HSIC: 290 portsc = PORTSC_PTS(PTS_HSIC); 291 lpm = DEVLC_PTS(PTS_HSIC); 292 break; 293 default: 294 return; 295 } 296 297 if (ci->hw_bank.lpm) { 298 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); 299 if (sts) 300 hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS); 301 } else { 302 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); 303 if (sts) 304 hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS); 305 } 306 } 307 EXPORT_SYMBOL_GPL(hw_phymode_configure); 308 309 /** 310 * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy 311 * interfaces 312 * @ci: the controller 313 * 314 * This function returns an error code if the phy failed to init 315 */ 316 static int _ci_usb_phy_init(struct ci_hdrc *ci) 317 { 318 int ret; 319 320 if (ci->phy) { 321 ret = phy_init(ci->phy); 322 if (ret) 323 return ret; 324 325 ret = phy_power_on(ci->phy); 326 if (ret) { 327 phy_exit(ci->phy); 328 return ret; 329 } 330 } else { 331 ret = usb_phy_init(ci->usb_phy); 332 } 333 334 return ret; 335 } 336 337 /** 338 * ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy 339 * interfaces 340 * @ci: the controller 341 */ 342 static void ci_usb_phy_exit(struct ci_hdrc *ci) 343 { 344 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) 345 return; 346 347 if (ci->phy) { 348 phy_power_off(ci->phy); 349 phy_exit(ci->phy); 350 } else { 351 usb_phy_shutdown(ci->usb_phy); 352 } 353 } 354 355 /** 356 * ci_usb_phy_init: initialize phy according to different phy type 357 * @ci: the controller 358 * 359 * This function returns an error code if usb_phy_init has failed 360 */ 361 static int ci_usb_phy_init(struct ci_hdrc *ci) 362 { 363 int ret; 364 365 if (ci->platdata->flags & CI_HDRC_OVERRIDE_PHY_CONTROL) 366 return 0; 367 368 switch (ci->platdata->phy_mode) { 369 case USBPHY_INTERFACE_MODE_UTMI: 370 case USBPHY_INTERFACE_MODE_UTMIW: 371 case USBPHY_INTERFACE_MODE_HSIC: 372 ret = _ci_usb_phy_init(ci); 373 if (!ret) 374 hw_wait_phy_stable(); 375 else 376 return ret; 377 hw_phymode_configure(ci); 378 break; 379 case USBPHY_INTERFACE_MODE_ULPI: 380 case USBPHY_INTERFACE_MODE_SERIAL: 381 hw_phymode_configure(ci); 382 ret = _ci_usb_phy_init(ci); 383 if (ret) 384 return ret; 385 break; 386 default: 387 ret = _ci_usb_phy_init(ci); 388 if (!ret) 389 hw_wait_phy_stable(); 390 } 391 392 return ret; 393 } 394 395 396 /** 397 * ci_platform_configure: do controller configure 398 * @ci: the controller 399 * 400 */ 401 void ci_platform_configure(struct ci_hdrc *ci) 402 { 403 bool is_device_mode, is_host_mode; 404 405 is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC; 406 is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC; 407 408 if (is_device_mode) { 409 phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE); 410 411 if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING) 412 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, 413 USBMODE_CI_SDIS); 414 } 415 416 if (is_host_mode) { 417 phy_set_mode(ci->phy, PHY_MODE_USB_HOST); 418 419 if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING) 420 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, 421 USBMODE_CI_SDIS); 422 } 423 424 if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { 425 if (ci->hw_bank.lpm) 426 hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); 427 else 428 hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); 429 } 430 431 if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA) 432 hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA); 433 434 hw_write(ci, OP_USBCMD, 0xff0000, ci->platdata->itc_setting << 16); 435 436 if (ci->platdata->flags & CI_HDRC_OVERRIDE_AHB_BURST) 437 hw_write_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK, 438 ci->platdata->ahb_burst_config); 439 440 /* override burst size, take effect only when ahb_burst_config is 0 */ 441 if (!hw_read_id_reg(ci, ID_SBUSCFG, AHBBRST_MASK)) { 442 if (ci->platdata->flags & CI_HDRC_OVERRIDE_TX_BURST) 443 hw_write(ci, OP_BURSTSIZE, TX_BURST_MASK, 444 ci->platdata->tx_burst_size << __ffs(TX_BURST_MASK)); 445 446 if (ci->platdata->flags & CI_HDRC_OVERRIDE_RX_BURST) 447 hw_write(ci, OP_BURSTSIZE, RX_BURST_MASK, 448 ci->platdata->rx_burst_size); 449 } 450 } 451 452 /** 453 * hw_controller_reset: do controller reset 454 * @ci: the controller 455 * 456 * This function returns an error code 457 */ 458 static int hw_controller_reset(struct ci_hdrc *ci) 459 { 460 int count = 0; 461 462 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); 463 while (hw_read(ci, OP_USBCMD, USBCMD_RST)) { 464 udelay(10); 465 if (count++ > 1000) 466 return -ETIMEDOUT; 467 } 468 469 return 0; 470 } 471 472 /** 473 * hw_device_reset: resets chip (execute without interruption) 474 * @ci: the controller 475 * 476 * This function returns an error code 477 */ 478 int hw_device_reset(struct ci_hdrc *ci) 479 { 480 int ret; 481 482 /* should flush & stop before reset */ 483 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); 484 hw_write(ci, OP_USBCMD, USBCMD_RS, 0); 485 486 ret = hw_controller_reset(ci); 487 if (ret) { 488 dev_err(ci->dev, "error resetting controller, ret=%d\n", ret); 489 return ret; 490 } 491 492 if (ci->platdata->notify_event) { 493 ret = ci->platdata->notify_event(ci, 494 CI_HDRC_CONTROLLER_RESET_EVENT); 495 if (ret) 496 return ret; 497 } 498 499 /* USBMODE should be configured step by step */ 500 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); 501 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC); 502 /* HW >= 2.3 */ 503 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); 504 505 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { 506 dev_err(ci->dev, "cannot enter in %s device mode\n", 507 ci_role(ci)->name); 508 dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm); 509 return -ENODEV; 510 } 511 512 ci_platform_configure(ci); 513 514 return 0; 515 } 516 517 static irqreturn_t ci_irq_handler(int irq, void *data) 518 { 519 struct ci_hdrc *ci = data; 520 irqreturn_t ret = IRQ_NONE; 521 u32 otgsc = 0; 522 523 if (ci->in_lpm) { 524 disable_irq_nosync(irq); 525 ci->wakeup_int = true; 526 pm_runtime_get(ci->dev); 527 return IRQ_HANDLED; 528 } 529 530 if (ci->is_otg) { 531 otgsc = hw_read_otgsc(ci, ~0); 532 if (ci_otg_is_fsm_mode(ci)) { 533 ret = ci_otg_fsm_irq(ci); 534 if (ret == IRQ_HANDLED) 535 return ret; 536 } 537 } 538 539 /* 540 * Handle id change interrupt, it indicates device/host function 541 * switch. 542 */ 543 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { 544 ci->id_event = true; 545 /* Clear ID change irq status */ 546 hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); 547 ci_otg_queue_work(ci); 548 return IRQ_HANDLED; 549 } 550 551 /* 552 * Handle vbus change interrupt, it indicates device connection 553 * and disconnection events. 554 */ 555 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { 556 ci->b_sess_valid_event = true; 557 /* Clear BSV irq */ 558 hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); 559 ci_otg_queue_work(ci); 560 return IRQ_HANDLED; 561 } 562 563 /* Handle device/host interrupt */ 564 if (ci->role != CI_ROLE_END) 565 ret = ci_role(ci)->irq(ci); 566 567 return ret; 568 } 569 570 static void ci_irq(struct ci_hdrc *ci) 571 { 572 unsigned long flags; 573 574 local_irq_save(flags); 575 ci_irq_handler(ci->irq, ci); 576 local_irq_restore(flags); 577 } 578 579 static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, 580 void *ptr) 581 { 582 struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb); 583 struct ci_hdrc *ci = cbl->ci; 584 585 cbl->connected = event; 586 cbl->changed = true; 587 588 ci_irq(ci); 589 return NOTIFY_DONE; 590 } 591 592 static enum usb_role ci_usb_role_switch_get(struct usb_role_switch *sw) 593 { 594 struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw); 595 enum usb_role role; 596 unsigned long flags; 597 598 spin_lock_irqsave(&ci->lock, flags); 599 role = ci_role_to_usb_role(ci); 600 spin_unlock_irqrestore(&ci->lock, flags); 601 602 return role; 603 } 604 605 static int ci_usb_role_switch_set(struct usb_role_switch *sw, 606 enum usb_role role) 607 { 608 struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw); 609 struct ci_hdrc_cable *cable = NULL; 610 enum usb_role current_role = ci_role_to_usb_role(ci); 611 enum ci_role ci_role = usb_role_to_ci_role(role); 612 unsigned long flags; 613 614 if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) || 615 (current_role == role)) 616 return 0; 617 618 pm_runtime_get_sync(ci->dev); 619 /* Stop current role */ 620 spin_lock_irqsave(&ci->lock, flags); 621 if (current_role == USB_ROLE_DEVICE) 622 cable = &ci->platdata->vbus_extcon; 623 else if (current_role == USB_ROLE_HOST) 624 cable = &ci->platdata->id_extcon; 625 626 if (cable) { 627 cable->changed = true; 628 cable->connected = false; 629 ci_irq(ci); 630 spin_unlock_irqrestore(&ci->lock, flags); 631 if (ci->wq && role != USB_ROLE_NONE) 632 flush_workqueue(ci->wq); 633 spin_lock_irqsave(&ci->lock, flags); 634 } 635 636 cable = NULL; 637 638 /* Start target role */ 639 if (role == USB_ROLE_DEVICE) 640 cable = &ci->platdata->vbus_extcon; 641 else if (role == USB_ROLE_HOST) 642 cable = &ci->platdata->id_extcon; 643 644 if (cable) { 645 cable->changed = true; 646 cable->connected = true; 647 ci_irq(ci); 648 } 649 spin_unlock_irqrestore(&ci->lock, flags); 650 pm_runtime_put_sync(ci->dev); 651 652 return 0; 653 } 654 655 static struct usb_role_switch_desc ci_role_switch = { 656 .set = ci_usb_role_switch_set, 657 .get = ci_usb_role_switch_get, 658 .allow_userspace_control = true, 659 }; 660 661 static int ci_get_platdata(struct device *dev, 662 struct ci_hdrc_platform_data *platdata) 663 { 664 struct extcon_dev *ext_vbus, *ext_id; 665 struct ci_hdrc_cable *cable; 666 int ret; 667 668 if (!platdata->phy_mode) 669 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); 670 671 if (!platdata->dr_mode) 672 platdata->dr_mode = usb_get_dr_mode(dev); 673 674 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) 675 platdata->dr_mode = USB_DR_MODE_OTG; 676 677 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { 678 /* Get the vbus regulator */ 679 platdata->reg_vbus = devm_regulator_get_optional(dev, "vbus"); 680 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { 681 return -EPROBE_DEFER; 682 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { 683 /* no vbus regulator is needed */ 684 platdata->reg_vbus = NULL; 685 } else if (IS_ERR(platdata->reg_vbus)) { 686 dev_err(dev, "Getting regulator error: %ld\n", 687 PTR_ERR(platdata->reg_vbus)); 688 return PTR_ERR(platdata->reg_vbus); 689 } 690 /* Get TPL support */ 691 if (!platdata->tpl_support) 692 platdata->tpl_support = 693 of_usb_host_tpl_support(dev->of_node); 694 } 695 696 if (platdata->dr_mode == USB_DR_MODE_OTG) { 697 /* We can support HNP and SRP of OTG 2.0 */ 698 platdata->ci_otg_caps.otg_rev = 0x0200; 699 platdata->ci_otg_caps.hnp_support = true; 700 platdata->ci_otg_caps.srp_support = true; 701 702 /* Update otg capabilities by DT properties */ 703 ret = of_usb_update_otg_caps(dev->of_node, 704 &platdata->ci_otg_caps); 705 if (ret) 706 return ret; 707 } 708 709 if (usb_get_maximum_speed(dev) == USB_SPEED_FULL) 710 platdata->flags |= CI_HDRC_FORCE_FULLSPEED; 711 712 of_property_read_u32(dev->of_node, "phy-clkgate-delay-us", 713 &platdata->phy_clkgate_delay_us); 714 715 platdata->itc_setting = 1; 716 717 of_property_read_u32(dev->of_node, "itc-setting", 718 &platdata->itc_setting); 719 720 ret = of_property_read_u32(dev->of_node, "ahb-burst-config", 721 &platdata->ahb_burst_config); 722 if (!ret) { 723 platdata->flags |= CI_HDRC_OVERRIDE_AHB_BURST; 724 } else if (ret != -EINVAL) { 725 dev_err(dev, "failed to get ahb-burst-config\n"); 726 return ret; 727 } 728 729 ret = of_property_read_u32(dev->of_node, "tx-burst-size-dword", 730 &platdata->tx_burst_size); 731 if (!ret) { 732 platdata->flags |= CI_HDRC_OVERRIDE_TX_BURST; 733 } else if (ret != -EINVAL) { 734 dev_err(dev, "failed to get tx-burst-size-dword\n"); 735 return ret; 736 } 737 738 ret = of_property_read_u32(dev->of_node, "rx-burst-size-dword", 739 &platdata->rx_burst_size); 740 if (!ret) { 741 platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST; 742 } else if (ret != -EINVAL) { 743 dev_err(dev, "failed to get rx-burst-size-dword\n"); 744 return ret; 745 } 746 747 if (of_find_property(dev->of_node, "non-zero-ttctrl-ttha", NULL)) 748 platdata->flags |= CI_HDRC_SET_NON_ZERO_TTHA; 749 750 ext_id = ERR_PTR(-ENODEV); 751 ext_vbus = ERR_PTR(-ENODEV); 752 if (of_property_read_bool(dev->of_node, "extcon")) { 753 /* Each one of them is not mandatory */ 754 ext_vbus = extcon_get_edev_by_phandle(dev, 0); 755 if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) 756 return PTR_ERR(ext_vbus); 757 758 ext_id = extcon_get_edev_by_phandle(dev, 1); 759 if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) 760 return PTR_ERR(ext_id); 761 } 762 763 cable = &platdata->vbus_extcon; 764 cable->nb.notifier_call = ci_cable_notifier; 765 cable->edev = ext_vbus; 766 767 if (!IS_ERR(ext_vbus)) { 768 ret = extcon_get_state(cable->edev, EXTCON_USB); 769 if (ret) 770 cable->connected = true; 771 else 772 cable->connected = false; 773 } 774 775 cable = &platdata->id_extcon; 776 cable->nb.notifier_call = ci_cable_notifier; 777 cable->edev = ext_id; 778 779 if (!IS_ERR(ext_id)) { 780 ret = extcon_get_state(cable->edev, EXTCON_USB_HOST); 781 if (ret) 782 cable->connected = true; 783 else 784 cable->connected = false; 785 } 786 787 if (device_property_read_bool(dev, "usb-role-switch")) 788 ci_role_switch.fwnode = dev->fwnode; 789 790 platdata->pctl = devm_pinctrl_get(dev); 791 if (!IS_ERR(platdata->pctl)) { 792 struct pinctrl_state *p; 793 794 p = pinctrl_lookup_state(platdata->pctl, "default"); 795 if (!IS_ERR(p)) 796 platdata->pins_default = p; 797 798 p = pinctrl_lookup_state(platdata->pctl, "host"); 799 if (!IS_ERR(p)) 800 platdata->pins_host = p; 801 802 p = pinctrl_lookup_state(platdata->pctl, "device"); 803 if (!IS_ERR(p)) 804 platdata->pins_device = p; 805 } 806 807 if (!platdata->enter_lpm) 808 platdata->enter_lpm = ci_hdrc_enter_lpm_common; 809 810 return 0; 811 } 812 813 static int ci_extcon_register(struct ci_hdrc *ci) 814 { 815 struct ci_hdrc_cable *id, *vbus; 816 int ret; 817 818 id = &ci->platdata->id_extcon; 819 id->ci = ci; 820 if (!IS_ERR_OR_NULL(id->edev)) { 821 ret = devm_extcon_register_notifier(ci->dev, id->edev, 822 EXTCON_USB_HOST, &id->nb); 823 if (ret < 0) { 824 dev_err(ci->dev, "register ID failed\n"); 825 return ret; 826 } 827 } 828 829 vbus = &ci->platdata->vbus_extcon; 830 vbus->ci = ci; 831 if (!IS_ERR_OR_NULL(vbus->edev)) { 832 ret = devm_extcon_register_notifier(ci->dev, vbus->edev, 833 EXTCON_USB, &vbus->nb); 834 if (ret < 0) { 835 dev_err(ci->dev, "register VBUS failed\n"); 836 return ret; 837 } 838 } 839 840 return 0; 841 } 842 843 static DEFINE_IDA(ci_ida); 844 845 struct platform_device *ci_hdrc_add_device(struct device *dev, 846 struct resource *res, int nres, 847 struct ci_hdrc_platform_data *platdata) 848 { 849 struct platform_device *pdev; 850 int id, ret; 851 852 ret = ci_get_platdata(dev, platdata); 853 if (ret) 854 return ERR_PTR(ret); 855 856 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); 857 if (id < 0) 858 return ERR_PTR(id); 859 860 pdev = platform_device_alloc("ci_hdrc", id); 861 if (!pdev) { 862 ret = -ENOMEM; 863 goto put_id; 864 } 865 866 pdev->dev.parent = dev; 867 868 ret = platform_device_add_resources(pdev, res, nres); 869 if (ret) 870 goto err; 871 872 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); 873 if (ret) 874 goto err; 875 876 ret = platform_device_add(pdev); 877 if (ret) 878 goto err; 879 880 return pdev; 881 882 err: 883 platform_device_put(pdev); 884 put_id: 885 ida_simple_remove(&ci_ida, id); 886 return ERR_PTR(ret); 887 } 888 EXPORT_SYMBOL_GPL(ci_hdrc_add_device); 889 890 void ci_hdrc_remove_device(struct platform_device *pdev) 891 { 892 int id = pdev->id; 893 platform_device_unregister(pdev); 894 ida_simple_remove(&ci_ida, id); 895 } 896 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); 897 898 /** 899 * ci_hdrc_query_available_role: get runtime available operation mode 900 * 901 * The glue layer can get current operation mode (host/peripheral/otg) 902 * This function should be called after ci core device has created. 903 * 904 * @pdev: the platform device of ci core. 905 * 906 * Return runtime usb_dr_mode. 907 */ 908 enum usb_dr_mode ci_hdrc_query_available_role(struct platform_device *pdev) 909 { 910 struct ci_hdrc *ci = platform_get_drvdata(pdev); 911 912 if (!ci) 913 return USB_DR_MODE_UNKNOWN; 914 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) 915 return USB_DR_MODE_OTG; 916 else if (ci->roles[CI_ROLE_HOST]) 917 return USB_DR_MODE_HOST; 918 else if (ci->roles[CI_ROLE_GADGET]) 919 return USB_DR_MODE_PERIPHERAL; 920 else 921 return USB_DR_MODE_UNKNOWN; 922 } 923 EXPORT_SYMBOL_GPL(ci_hdrc_query_available_role); 924 925 static inline void ci_role_destroy(struct ci_hdrc *ci) 926 { 927 ci_hdrc_gadget_destroy(ci); 928 ci_hdrc_host_destroy(ci); 929 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) 930 ci_hdrc_otg_destroy(ci); 931 } 932 933 static void ci_get_otg_capable(struct ci_hdrc *ci) 934 { 935 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) 936 ci->is_otg = false; 937 else 938 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, 939 DCCPARAMS_DC | DCCPARAMS_HC) 940 == (DCCPARAMS_DC | DCCPARAMS_HC)); 941 if (ci->is_otg) { 942 dev_dbg(ci->dev, "It is OTG capable controller\n"); 943 /* Disable and clear all OTG irq */ 944 hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, 945 OTGSC_INT_STATUS_BITS); 946 } 947 } 948 949 static ssize_t role_show(struct device *dev, struct device_attribute *attr, 950 char *buf) 951 { 952 struct ci_hdrc *ci = dev_get_drvdata(dev); 953 954 if (ci->role != CI_ROLE_END) 955 return sprintf(buf, "%s\n", ci_role(ci)->name); 956 957 return 0; 958 } 959 960 static ssize_t role_store(struct device *dev, 961 struct device_attribute *attr, const char *buf, size_t n) 962 { 963 struct ci_hdrc *ci = dev_get_drvdata(dev); 964 enum ci_role role; 965 int ret; 966 967 if (!(ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET])) { 968 dev_warn(dev, "Current configuration is not dual-role, quit\n"); 969 return -EPERM; 970 } 971 972 for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) 973 if (!strncmp(buf, ci->roles[role]->name, 974 strlen(ci->roles[role]->name))) 975 break; 976 977 if (role == CI_ROLE_END || role == ci->role) 978 return -EINVAL; 979 980 pm_runtime_get_sync(dev); 981 disable_irq(ci->irq); 982 ci_role_stop(ci); 983 ret = ci_role_start(ci, role); 984 if (!ret && ci->role == CI_ROLE_GADGET) 985 ci_handle_vbus_change(ci); 986 enable_irq(ci->irq); 987 pm_runtime_put_sync(dev); 988 989 return (ret == 0) ? n : ret; 990 } 991 static DEVICE_ATTR_RW(role); 992 993 static struct attribute *ci_attrs[] = { 994 &dev_attr_role.attr, 995 NULL, 996 }; 997 ATTRIBUTE_GROUPS(ci); 998 999 static int ci_hdrc_probe(struct platform_device *pdev) 1000 { 1001 struct device *dev = &pdev->dev; 1002 struct ci_hdrc *ci; 1003 struct resource *res; 1004 void __iomem *base; 1005 int ret; 1006 enum usb_dr_mode dr_mode; 1007 1008 if (!dev_get_platdata(dev)) { 1009 dev_err(dev, "platform data missing\n"); 1010 return -ENODEV; 1011 } 1012 1013 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1014 base = devm_ioremap_resource(dev, res); 1015 if (IS_ERR(base)) 1016 return PTR_ERR(base); 1017 1018 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); 1019 if (!ci) 1020 return -ENOMEM; 1021 1022 spin_lock_init(&ci->lock); 1023 ci->dev = dev; 1024 ci->platdata = dev_get_platdata(dev); 1025 ci->imx28_write_fix = !!(ci->platdata->flags & 1026 CI_HDRC_IMX28_WRITE_FIX); 1027 ci->supports_runtime_pm = !!(ci->platdata->flags & 1028 CI_HDRC_SUPPORTS_RUNTIME_PM); 1029 platform_set_drvdata(pdev, ci); 1030 1031 ret = hw_device_init(ci, base); 1032 if (ret < 0) { 1033 dev_err(dev, "can't initialize hardware\n"); 1034 return -ENODEV; 1035 } 1036 1037 ret = ci_ulpi_init(ci); 1038 if (ret) 1039 return ret; 1040 1041 if (ci->platdata->phy) { 1042 ci->phy = ci->platdata->phy; 1043 } else if (ci->platdata->usb_phy) { 1044 ci->usb_phy = ci->platdata->usb_phy; 1045 } else { 1046 /* Look for a generic PHY first */ 1047 ci->phy = devm_phy_get(dev->parent, "usb-phy"); 1048 1049 if (PTR_ERR(ci->phy) == -EPROBE_DEFER) { 1050 ret = -EPROBE_DEFER; 1051 goto ulpi_exit; 1052 } else if (IS_ERR(ci->phy)) { 1053 ci->phy = NULL; 1054 } 1055 1056 /* Look for a legacy USB PHY from device-tree next */ 1057 if (!ci->phy) { 1058 ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, 1059 "phys", 0); 1060 1061 if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) { 1062 ret = -EPROBE_DEFER; 1063 goto ulpi_exit; 1064 } else if (IS_ERR(ci->usb_phy)) { 1065 ci->usb_phy = NULL; 1066 } 1067 } 1068 1069 /* Look for any registered legacy USB PHY as last resort */ 1070 if (!ci->phy && !ci->usb_phy) { 1071 ci->usb_phy = devm_usb_get_phy(dev->parent, 1072 USB_PHY_TYPE_USB2); 1073 1074 if (PTR_ERR(ci->usb_phy) == -EPROBE_DEFER) { 1075 ret = -EPROBE_DEFER; 1076 goto ulpi_exit; 1077 } else if (IS_ERR(ci->usb_phy)) { 1078 ci->usb_phy = NULL; 1079 } 1080 } 1081 1082 /* No USB PHY was found in the end */ 1083 if (!ci->phy && !ci->usb_phy) { 1084 ret = -ENXIO; 1085 goto ulpi_exit; 1086 } 1087 } 1088 1089 ret = ci_usb_phy_init(ci); 1090 if (ret) { 1091 dev_err(dev, "unable to init phy: %d\n", ret); 1092 return ret; 1093 } 1094 1095 ci->hw_bank.phys = res->start; 1096 1097 ci->irq = platform_get_irq(pdev, 0); 1098 if (ci->irq < 0) { 1099 ret = ci->irq; 1100 goto deinit_phy; 1101 } 1102 1103 ci_get_otg_capable(ci); 1104 1105 dr_mode = ci->platdata->dr_mode; 1106 /* initialize role(s) before the interrupt is requested */ 1107 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { 1108 ret = ci_hdrc_host_init(ci); 1109 if (ret) { 1110 if (ret == -ENXIO) 1111 dev_info(dev, "doesn't support host\n"); 1112 else 1113 goto deinit_phy; 1114 } 1115 } 1116 1117 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { 1118 ret = ci_hdrc_gadget_init(ci); 1119 if (ret) { 1120 if (ret == -ENXIO) 1121 dev_info(dev, "doesn't support gadget\n"); 1122 else 1123 goto deinit_host; 1124 } 1125 } 1126 1127 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { 1128 dev_err(dev, "no supported roles\n"); 1129 ret = -ENODEV; 1130 goto deinit_gadget; 1131 } 1132 1133 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { 1134 ret = ci_hdrc_otg_init(ci); 1135 if (ret) { 1136 dev_err(dev, "init otg fails, ret = %d\n", ret); 1137 goto deinit_gadget; 1138 } 1139 } 1140 1141 if (ci_role_switch.fwnode) { 1142 ci_role_switch.driver_data = ci; 1143 ci->role_switch = usb_role_switch_register(dev, 1144 &ci_role_switch); 1145 if (IS_ERR(ci->role_switch)) { 1146 ret = PTR_ERR(ci->role_switch); 1147 goto deinit_otg; 1148 } 1149 } 1150 1151 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { 1152 if (ci->is_otg) { 1153 ci->role = ci_otg_role(ci); 1154 /* Enable ID change irq */ 1155 hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); 1156 } else { 1157 /* 1158 * If the controller is not OTG capable, but support 1159 * role switch, the defalt role is gadget, and the 1160 * user can switch it through debugfs. 1161 */ 1162 ci->role = CI_ROLE_GADGET; 1163 } 1164 } else { 1165 ci->role = ci->roles[CI_ROLE_HOST] 1166 ? CI_ROLE_HOST 1167 : CI_ROLE_GADGET; 1168 } 1169 1170 if (!ci_otg_is_fsm_mode(ci)) { 1171 /* only update vbus status for peripheral */ 1172 if (ci->role == CI_ROLE_GADGET) { 1173 /* Pull down DP for possible charger detection */ 1174 hw_write(ci, OP_USBCMD, USBCMD_RS, 0); 1175 ci_handle_vbus_change(ci); 1176 } 1177 1178 ret = ci_role_start(ci, ci->role); 1179 if (ret) { 1180 dev_err(dev, "can't start %s role\n", 1181 ci_role(ci)->name); 1182 goto stop; 1183 } 1184 } 1185 1186 ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED, 1187 ci->platdata->name, ci); 1188 if (ret) 1189 goto stop; 1190 1191 ret = ci_extcon_register(ci); 1192 if (ret) 1193 goto stop; 1194 1195 if (ci->supports_runtime_pm) { 1196 pm_runtime_set_active(&pdev->dev); 1197 pm_runtime_enable(&pdev->dev); 1198 pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); 1199 pm_runtime_mark_last_busy(ci->dev); 1200 pm_runtime_use_autosuspend(&pdev->dev); 1201 } 1202 1203 if (ci_otg_is_fsm_mode(ci)) 1204 ci_hdrc_otg_fsm_start(ci); 1205 1206 device_set_wakeup_capable(&pdev->dev, true); 1207 dbg_create_files(ci); 1208 1209 return 0; 1210 1211 stop: 1212 if (ci->role_switch) 1213 usb_role_switch_unregister(ci->role_switch); 1214 deinit_otg: 1215 if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) 1216 ci_hdrc_otg_destroy(ci); 1217 deinit_gadget: 1218 ci_hdrc_gadget_destroy(ci); 1219 deinit_host: 1220 ci_hdrc_host_destroy(ci); 1221 deinit_phy: 1222 ci_usb_phy_exit(ci); 1223 ulpi_exit: 1224 ci_ulpi_exit(ci); 1225 1226 return ret; 1227 } 1228 1229 static int ci_hdrc_remove(struct platform_device *pdev) 1230 { 1231 struct ci_hdrc *ci = platform_get_drvdata(pdev); 1232 1233 if (ci->role_switch) 1234 usb_role_switch_unregister(ci->role_switch); 1235 1236 if (ci->supports_runtime_pm) { 1237 pm_runtime_get_sync(&pdev->dev); 1238 pm_runtime_disable(&pdev->dev); 1239 pm_runtime_put_noidle(&pdev->dev); 1240 } 1241 1242 dbg_remove_files(ci); 1243 ci_role_destroy(ci); 1244 ci_hdrc_enter_lpm(ci, true); 1245 ci_usb_phy_exit(ci); 1246 ci_ulpi_exit(ci); 1247 1248 return 0; 1249 } 1250 1251 #ifdef CONFIG_PM 1252 /* Prepare wakeup by SRP before suspend */ 1253 static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci) 1254 { 1255 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && 1256 !hw_read_otgsc(ci, OTGSC_ID)) { 1257 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 1258 PORTSC_PP); 1259 hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN, 1260 PORTSC_WKCN); 1261 } 1262 } 1263 1264 /* Handle SRP when wakeup by data pulse */ 1265 static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci) 1266 { 1267 if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) && 1268 (ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) { 1269 if (!hw_read_otgsc(ci, OTGSC_ID)) { 1270 ci->fsm.a_srp_det = 1; 1271 ci->fsm.a_bus_drop = 0; 1272 } else { 1273 ci->fsm.id = 1; 1274 } 1275 ci_otg_queue_work(ci); 1276 } 1277 } 1278 1279 static void ci_controller_suspend(struct ci_hdrc *ci) 1280 { 1281 disable_irq(ci->irq); 1282 ci_hdrc_enter_lpm(ci, true); 1283 if (ci->platdata->phy_clkgate_delay_us) 1284 usleep_range(ci->platdata->phy_clkgate_delay_us, 1285 ci->platdata->phy_clkgate_delay_us + 50); 1286 usb_phy_set_suspend(ci->usb_phy, 1); 1287 ci->in_lpm = true; 1288 enable_irq(ci->irq); 1289 } 1290 1291 /* 1292 * Handle the wakeup interrupt triggered by extcon connector 1293 * We need to call ci_irq again for extcon since the first 1294 * interrupt (wakeup int) only let the controller be out of 1295 * low power mode, but not handle any interrupts. 1296 */ 1297 static void ci_extcon_wakeup_int(struct ci_hdrc *ci) 1298 { 1299 struct ci_hdrc_cable *cable_id, *cable_vbus; 1300 u32 otgsc = hw_read_otgsc(ci, ~0); 1301 1302 cable_id = &ci->platdata->id_extcon; 1303 cable_vbus = &ci->platdata->vbus_extcon; 1304 1305 if (!IS_ERR(cable_id->edev) && ci->is_otg && 1306 (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) 1307 ci_irq(ci); 1308 1309 if (!IS_ERR(cable_vbus->edev) && ci->is_otg && 1310 (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) 1311 ci_irq(ci); 1312 } 1313 1314 static int ci_controller_resume(struct device *dev) 1315 { 1316 struct ci_hdrc *ci = dev_get_drvdata(dev); 1317 int ret; 1318 1319 dev_dbg(dev, "at %s\n", __func__); 1320 1321 if (!ci->in_lpm) { 1322 WARN_ON(1); 1323 return 0; 1324 } 1325 1326 ci_hdrc_enter_lpm(ci, false); 1327 1328 ret = ci_ulpi_resume(ci); 1329 if (ret) 1330 return ret; 1331 1332 if (ci->usb_phy) { 1333 usb_phy_set_suspend(ci->usb_phy, 0); 1334 usb_phy_set_wakeup(ci->usb_phy, false); 1335 hw_wait_phy_stable(); 1336 } 1337 1338 ci->in_lpm = false; 1339 if (ci->wakeup_int) { 1340 ci->wakeup_int = false; 1341 pm_runtime_mark_last_busy(ci->dev); 1342 pm_runtime_put_autosuspend(ci->dev); 1343 enable_irq(ci->irq); 1344 if (ci_otg_is_fsm_mode(ci)) 1345 ci_otg_fsm_wakeup_by_srp(ci); 1346 ci_extcon_wakeup_int(ci); 1347 } 1348 1349 return 0; 1350 } 1351 1352 #ifdef CONFIG_PM_SLEEP 1353 static int ci_suspend(struct device *dev) 1354 { 1355 struct ci_hdrc *ci = dev_get_drvdata(dev); 1356 1357 if (ci->wq) 1358 flush_workqueue(ci->wq); 1359 /* 1360 * Controller needs to be active during suspend, otherwise the core 1361 * may run resume when the parent is at suspend if other driver's 1362 * suspend fails, it occurs before parent's suspend has not started, 1363 * but the core suspend has finished. 1364 */ 1365 if (ci->in_lpm) 1366 pm_runtime_resume(dev); 1367 1368 if (ci->in_lpm) { 1369 WARN_ON(1); 1370 return 0; 1371 } 1372 1373 if (device_may_wakeup(dev)) { 1374 if (ci_otg_is_fsm_mode(ci)) 1375 ci_otg_fsm_suspend_for_srp(ci); 1376 1377 usb_phy_set_wakeup(ci->usb_phy, true); 1378 enable_irq_wake(ci->irq); 1379 } 1380 1381 ci_controller_suspend(ci); 1382 1383 return 0; 1384 } 1385 1386 static int ci_resume(struct device *dev) 1387 { 1388 struct ci_hdrc *ci = dev_get_drvdata(dev); 1389 int ret; 1390 1391 if (device_may_wakeup(dev)) 1392 disable_irq_wake(ci->irq); 1393 1394 ret = ci_controller_resume(dev); 1395 if (ret) 1396 return ret; 1397 1398 if (ci->supports_runtime_pm) { 1399 pm_runtime_disable(dev); 1400 pm_runtime_set_active(dev); 1401 pm_runtime_enable(dev); 1402 } 1403 1404 return ret; 1405 } 1406 #endif /* CONFIG_PM_SLEEP */ 1407 1408 static int ci_runtime_suspend(struct device *dev) 1409 { 1410 struct ci_hdrc *ci = dev_get_drvdata(dev); 1411 1412 dev_dbg(dev, "at %s\n", __func__); 1413 1414 if (ci->in_lpm) { 1415 WARN_ON(1); 1416 return 0; 1417 } 1418 1419 if (ci_otg_is_fsm_mode(ci)) 1420 ci_otg_fsm_suspend_for_srp(ci); 1421 1422 usb_phy_set_wakeup(ci->usb_phy, true); 1423 ci_controller_suspend(ci); 1424 1425 return 0; 1426 } 1427 1428 static int ci_runtime_resume(struct device *dev) 1429 { 1430 return ci_controller_resume(dev); 1431 } 1432 1433 #endif /* CONFIG_PM */ 1434 static const struct dev_pm_ops ci_pm_ops = { 1435 SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) 1436 SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) 1437 }; 1438 1439 static struct platform_driver ci_hdrc_driver = { 1440 .probe = ci_hdrc_probe, 1441 .remove = ci_hdrc_remove, 1442 .driver = { 1443 .name = "ci_hdrc", 1444 .pm = &ci_pm_ops, 1445 .dev_groups = ci_groups, 1446 }, 1447 }; 1448 1449 static int __init ci_hdrc_platform_register(void) 1450 { 1451 ci_hdrc_host_driver_init(); 1452 return platform_driver_register(&ci_hdrc_driver); 1453 } 1454 module_init(ci_hdrc_platform_register); 1455 1456 static void __exit ci_hdrc_platform_unregister(void) 1457 { 1458 platform_driver_unregister(&ci_hdrc_driver); 1459 } 1460 module_exit(ci_hdrc_platform_unregister); 1461 1462 MODULE_ALIAS("platform:ci_hdrc"); 1463 MODULE_LICENSE("GPL v2"); 1464 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>"); 1465 MODULE_DESCRIPTION("ChipIdea HDRC Driver"); 1466