1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * c67x00-hcd.h: Cypress C67X00 USB HCD
4 *
5 * Copyright (C) 2006-2008 Barco N.V.
6 * Derived from the Cypress cy7c67200/300 ezusb linux driver and
7 * based on multiple host controller drivers inside the linux kernel.
8 */
9
10 #ifndef _USB_C67X00_HCD_H
11 #define _USB_C67X00_HCD_H
12
13 #include <linux/kernel.h>
14 #include <linux/spinlock.h>
15 #include <linux/list.h>
16 #include <linux/usb.h>
17 #include <linux/usb/hcd.h>
18 #include "c67x00.h"
19
20 /*
21 * The following parameters depend on the CPU speed, bus speed, ...
22 * These can be tuned for specific use cases, e.g. if isochronous transfers
23 * are very important, bandwidth can be sacrificed to guarantee that the
24 * 1ms deadline will be met.
25 * If bulk transfers are important, the MAX_FRAME_BW can be increased,
26 * but some (or many) isochronous deadlines might not be met.
27 *
28 * The values are specified in bittime.
29 */
30
31 /*
32 * The current implementation switches between _STD (default) and _ISO (when
33 * isochronous transfers are scheduled), in order to optimize the throughput
34 * in normal circumstances, but also provide good isochronous behaviour.
35 *
36 * Bandwidth is described in bit time so with a 12MHz USB clock and 1ms
37 * frames; there are 12000 bit times per frame.
38 */
39
40 #define TOTAL_FRAME_BW 12000
41 #define DEFAULT_EOT 2250
42
43 #define MAX_FRAME_BW_STD (TOTAL_FRAME_BW - DEFAULT_EOT)
44 #define MAX_FRAME_BW_ISO 2400
45
46 /*
47 * Periodic transfers may only use 90% of the full frame, but as
48 * we currently don't even use 90% of the full frame, we may
49 * use the full usable time for periodic transfers.
50 */
51 #define MAX_PERIODIC_BW(full_bw) full_bw
52
53 /* -------------------------------------------------------------------------- */
54
55 struct c67x00_hcd {
56 spinlock_t lock;
57 struct c67x00_sie *sie;
58 unsigned int low_speed_ports; /* bitmask of low speed ports */
59 unsigned int urb_count;
60 unsigned int urb_iso_count;
61
62 struct list_head list[4]; /* iso, int, ctrl, bulk */
63 #if PIPE_BULK != 3
64 #error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
65 #endif
66
67 /* USB bandwidth allocated to td_list */
68 int bandwidth_allocated;
69 /* USB bandwidth allocated for isoc/int transfer */
70 int periodic_bw_allocated;
71 struct list_head td_list;
72 int max_frame_bw;
73
74 u16 td_base_addr;
75 u16 buf_base_addr;
76 u16 next_td_addr;
77 u16 next_buf_addr;
78
79 struct work_struct work;
80
81 struct completion endpoint_disable;
82
83 u16 current_frame;
84 u16 last_frame;
85 };
86
hcd_to_c67x00_hcd(struct usb_hcd * hcd)87 static inline struct c67x00_hcd *hcd_to_c67x00_hcd(struct usb_hcd *hcd)
88 {
89 return (struct c67x00_hcd *)(hcd->hcd_priv);
90 }
91
c67x00_hcd_to_hcd(struct c67x00_hcd * c67x00)92 static inline struct usb_hcd *c67x00_hcd_to_hcd(struct c67x00_hcd *c67x00)
93 {
94 return container_of((void *)c67x00, struct usb_hcd, hcd_priv);
95 }
96
97 /* ---------------------------------------------------------------------
98 * Functions used by c67x00-drv
99 */
100
101 int c67x00_hcd_probe(struct c67x00_sie *sie);
102 void c67x00_hcd_remove(struct c67x00_sie *sie);
103
104 /* ---------------------------------------------------------------------
105 * Transfer Descriptor scheduling functions
106 */
107 int c67x00_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
108 int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
109 void c67x00_endpoint_disable(struct usb_hcd *hcd,
110 struct usb_host_endpoint *ep);
111
112 void c67x00_sched_kick(struct c67x00_hcd *c67x00);
113 int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00);
114 void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00);
115
116 #define c67x00_hcd_dev(x) (c67x00_hcd_to_hcd(x)->self.controller)
117
118 #endif /* _USB_C67X00_HCD_H */
119