1 // SPDX-License-Identifier: GPL-2.0+ 2 /****************************************************************************** 3 * cxacru.c - driver for USB ADSL modems based on 4 * Conexant AccessRunner chipset 5 * 6 * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan 7 * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru) 8 * Copyright (C) 2007 Simon Arlott 9 * Copyright (C) 2009 Simon Arlott 10 ******************************************************************************/ 11 12 /* 13 * Credit is due for Josep Comas, who created the original patch to speedtch.c 14 * to support the different padding used by the AccessRunner (now generalized 15 * into usbatm), and the userspace firmware loading utility. 16 */ 17 18 #include <linux/module.h> 19 #include <linux/moduleparam.h> 20 #include <linux/kernel.h> 21 #include <linux/timer.h> 22 #include <linux/errno.h> 23 #include <linux/slab.h> 24 #include <linux/device.h> 25 #include <linux/firmware.h> 26 #include <linux/mutex.h> 27 #include <linux/unaligned.h> 28 29 #include "usbatm.h" 30 31 #define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott" 32 #define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver" 33 34 static const char cxacru_driver_name[] = "cxacru"; 35 36 #define CXACRU_EP_CMD 0x01 /* Bulk/interrupt in/out */ 37 #define CXACRU_EP_DATA 0x02 /* Bulk in/out */ 38 39 #define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */ 40 #define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2) 41 42 /* Addresses */ 43 #define PLLFCLK_ADDR 0x00350068 44 #define PLLBCLK_ADDR 0x0035006c 45 #define SDRAMEN_ADDR 0x00350010 46 #define FW_ADDR 0x00801000 47 #define BR_ADDR 0x00180600 48 #define SIG_ADDR 0x00180500 49 #define BR_STACK_ADDR 0x00187f10 50 51 /* Values */ 52 #define SDRAM_ENA 0x1 53 54 #define CMD_TIMEOUT 2000 /* msecs */ 55 #define POLL_INTERVAL 1 /* secs */ 56 57 /* commands for interaction with the modem through the control channel before 58 * firmware is loaded */ 59 enum cxacru_fw_request { 60 FW_CMD_ERR, 61 FW_GET_VER, 62 FW_READ_MEM, 63 FW_WRITE_MEM, 64 FW_RMW_MEM, 65 FW_CHECKSUM_MEM, 66 FW_GOTO_MEM, 67 }; 68 69 /* commands for interaction with the modem through the control channel once 70 * firmware is loaded */ 71 enum cxacru_cm_request { 72 CM_REQUEST_UNDEFINED = 0x80, 73 CM_REQUEST_TEST, 74 CM_REQUEST_CHIP_GET_MAC_ADDRESS, 75 CM_REQUEST_CHIP_GET_DP_VERSIONS, 76 CM_REQUEST_CHIP_ADSL_LINE_START, 77 CM_REQUEST_CHIP_ADSL_LINE_STOP, 78 CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS, 79 CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED, 80 CM_REQUEST_CARD_INFO_GET, 81 CM_REQUEST_CARD_DATA_GET, 82 CM_REQUEST_CARD_DATA_SET, 83 CM_REQUEST_COMMAND_HW_IO, 84 CM_REQUEST_INTERFACE_HW_IO, 85 CM_REQUEST_CARD_SERIAL_DATA_PATH_GET, 86 CM_REQUEST_CARD_SERIAL_DATA_PATH_SET, 87 CM_REQUEST_CARD_CONTROLLER_VERSION_GET, 88 CM_REQUEST_CARD_GET_STATUS, 89 CM_REQUEST_CARD_GET_MAC_ADDRESS, 90 CM_REQUEST_CARD_GET_DATA_LINK_STATUS, 91 CM_REQUEST_MAX, 92 }; 93 94 /* commands for interaction with the flash memory 95 * 96 * read: response is the contents of the first 60 bytes of flash memory 97 * write: request contains the 60 bytes of data to write to flash memory 98 * response is the contents of the first 60 bytes of flash memory 99 * 100 * layout: PP PP VV VV MM MM MM MM MM MM ?? ?? SS SS SS SS SS SS SS SS 101 * SS SS SS SS SS SS SS SS 00 00 00 00 00 00 00 00 00 00 00 00 102 * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 103 * 104 * P: le16 USB Product ID 105 * V: le16 USB Vendor ID 106 * M: be48 MAC Address 107 * S: le16 ASCII Serial Number 108 */ 109 enum cxacru_cm_flash { 110 CM_FLASH_READ = 0xa1, 111 CM_FLASH_WRITE = 0xa2 112 }; 113 114 /* reply codes to the commands above */ 115 enum cxacru_cm_status { 116 CM_STATUS_UNDEFINED, 117 CM_STATUS_SUCCESS, 118 CM_STATUS_ERROR, 119 CM_STATUS_UNSUPPORTED, 120 CM_STATUS_UNIMPLEMENTED, 121 CM_STATUS_PARAMETER_ERROR, 122 CM_STATUS_DBG_LOOPBACK, 123 CM_STATUS_MAX, 124 }; 125 126 /* indices into CARD_INFO_GET return array */ 127 enum cxacru_info_idx { 128 CXINF_DOWNSTREAM_RATE, 129 CXINF_UPSTREAM_RATE, 130 CXINF_LINK_STATUS, 131 CXINF_LINE_STATUS, 132 CXINF_MAC_ADDRESS_HIGH, 133 CXINF_MAC_ADDRESS_LOW, 134 CXINF_UPSTREAM_SNR_MARGIN, 135 CXINF_DOWNSTREAM_SNR_MARGIN, 136 CXINF_UPSTREAM_ATTENUATION, 137 CXINF_DOWNSTREAM_ATTENUATION, 138 CXINF_TRANSMITTER_POWER, 139 CXINF_UPSTREAM_BITS_PER_FRAME, 140 CXINF_DOWNSTREAM_BITS_PER_FRAME, 141 CXINF_STARTUP_ATTEMPTS, 142 CXINF_UPSTREAM_CRC_ERRORS, 143 CXINF_DOWNSTREAM_CRC_ERRORS, 144 CXINF_UPSTREAM_FEC_ERRORS, 145 CXINF_DOWNSTREAM_FEC_ERRORS, 146 CXINF_UPSTREAM_HEC_ERRORS, 147 CXINF_DOWNSTREAM_HEC_ERRORS, 148 CXINF_LINE_STARTABLE, 149 CXINF_MODULATION, 150 CXINF_ADSL_HEADEND, 151 CXINF_ADSL_HEADEND_ENVIRONMENT, 152 CXINF_CONTROLLER_VERSION, 153 /* dunno what the missing two mean */ 154 CXINF_MAX = 0x1c, 155 }; 156 157 enum cxacru_poll_state { 158 CXPOLL_STOPPING, 159 CXPOLL_STOPPED, 160 CXPOLL_POLLING, 161 CXPOLL_SHUTDOWN 162 }; 163 164 struct cxacru_modem_type { 165 u32 pll_f_clk; 166 u32 pll_b_clk; 167 int boot_rom_patch; 168 }; 169 170 struct cxacru_data { 171 struct usbatm_data *usbatm; 172 173 const struct cxacru_modem_type *modem_type; 174 175 int line_status; 176 struct mutex adsl_state_serialize; 177 int adsl_status; 178 struct delayed_work poll_work; 179 u32 card_info[CXINF_MAX]; 180 struct mutex poll_state_serialize; 181 enum cxacru_poll_state poll_state; 182 183 /* control handles */ 184 struct mutex cm_serialize; 185 u8 *rcv_buf; 186 u8 *snd_buf; 187 struct urb *rcv_urb; 188 struct urb *snd_urb; 189 struct completion rcv_done; 190 struct completion snd_done; 191 }; 192 193 static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, 194 u8 *wdata, int wsize, u8 *rdata, int rsize); 195 static void cxacru_poll_status(struct work_struct *work); 196 197 /* Card info exported through sysfs */ 198 #define CXACRU__ATTR_INIT(_name) \ 199 static DEVICE_ATTR_RO(_name) 200 201 #define CXACRU_CMD_INIT(_name) \ 202 static DEVICE_ATTR_RW(_name) 203 204 #define CXACRU_SET_INIT(_name) \ 205 static DEVICE_ATTR_WO(_name) 206 207 #define CXACRU_ATTR_INIT(_value, _type, _name) \ 208 static ssize_t _name##_show(struct device *dev, \ 209 struct device_attribute *attr, char *buf) \ 210 { \ 211 struct cxacru_data *instance = to_usbatm_driver_data(\ 212 to_usb_interface(dev)); \ 213 \ 214 if (instance == NULL) \ 215 return -ENODEV; \ 216 \ 217 return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \ 218 } \ 219 CXACRU__ATTR_INIT(_name) 220 221 #define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name) 222 #define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) 223 #define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) 224 #define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) 225 226 #define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name) 227 #define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) 228 #define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) 229 #define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) 230 231 static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) 232 { 233 return sprintf(buf, "%u\n", value); 234 } 235 236 static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) 237 { 238 return sprintf(buf, "%d\n", value); 239 } 240 241 static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) 242 { 243 if (likely(value >= 0)) { 244 return snprintf(buf, PAGE_SIZE, "%u.%02u\n", 245 value / 100, value % 100); 246 } else { 247 value = -value; 248 return snprintf(buf, PAGE_SIZE, "-%u.%02u\n", 249 value / 100, value % 100); 250 } 251 } 252 253 static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) 254 { 255 static char *str[] = { "no", "yes" }; 256 257 if (unlikely(value >= ARRAY_SIZE(str))) 258 return sprintf(buf, "%u\n", value); 259 return sprintf(buf, "%s\n", str[value]); 260 } 261 262 static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf) 263 { 264 static char *str[] = { NULL, "not connected", "connected", "lost" }; 265 266 if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL)) 267 return sprintf(buf, "%u\n", value); 268 return sprintf(buf, "%s\n", str[value]); 269 } 270 271 static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) 272 { 273 static char *str[] = { "down", "attempting to activate", 274 "training", "channel analysis", "exchange", "up", 275 "waiting", "initialising" 276 }; 277 if (unlikely(value >= ARRAY_SIZE(str))) 278 return sprintf(buf, "%u\n", value); 279 return sprintf(buf, "%s\n", str[value]); 280 } 281 282 static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) 283 { 284 static char *str[] = { 285 "", 286 "ANSI T1.413", 287 "ITU-T G.992.1 (G.DMT)", 288 "ITU-T G.992.2 (G.LITE)" 289 }; 290 if (unlikely(value >= ARRAY_SIZE(str))) 291 return sprintf(buf, "%u\n", value); 292 return sprintf(buf, "%s\n", str[value]); 293 } 294 295 /* 296 * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since 297 * this data is already in atm_dev there's no point. 298 * 299 * MAC_ADDRESS_HIGH = 0x????5544 300 * MAC_ADDRESS_LOW = 0x33221100 301 * Where 00-55 are bytes 0-5 of the MAC. 302 */ 303 static ssize_t mac_address_show(struct device *dev, 304 struct device_attribute *attr, char *buf) 305 { 306 struct cxacru_data *instance = to_usbatm_driver_data( 307 to_usb_interface(dev)); 308 309 if (instance == NULL || instance->usbatm->atm_dev == NULL) 310 return -ENODEV; 311 312 return sprintf(buf, "%pM\n", instance->usbatm->atm_dev->esi); 313 } 314 315 static ssize_t adsl_state_show(struct device *dev, 316 struct device_attribute *attr, char *buf) 317 { 318 static char *str[] = { "running", "stopped" }; 319 struct cxacru_data *instance = to_usbatm_driver_data( 320 to_usb_interface(dev)); 321 u32 value; 322 323 if (instance == NULL) 324 return -ENODEV; 325 326 value = instance->card_info[CXINF_LINE_STARTABLE]; 327 if (unlikely(value >= ARRAY_SIZE(str))) 328 return sprintf(buf, "%u\n", value); 329 return sprintf(buf, "%s\n", str[value]); 330 } 331 332 static ssize_t adsl_state_store(struct device *dev, 333 struct device_attribute *attr, const char *buf, size_t count) 334 { 335 struct cxacru_data *instance = to_usbatm_driver_data( 336 to_usb_interface(dev)); 337 int ret; 338 int poll = -1; 339 char str_cmd[8]; 340 int len = strlen(buf); 341 342 if (!capable(CAP_NET_ADMIN)) 343 return -EACCES; 344 345 ret = sscanf(buf, "%7s", str_cmd); 346 if (ret != 1) 347 return -EINVAL; 348 ret = 0; 349 350 if (instance == NULL) 351 return -ENODEV; 352 353 if (mutex_lock_interruptible(&instance->adsl_state_serialize)) 354 return -ERESTARTSYS; 355 356 if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) { 357 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0); 358 if (ret < 0) { 359 atm_err(instance->usbatm, "change adsl state:" 360 " CHIP_ADSL_LINE_STOP returned %d\n", ret); 361 362 ret = -EIO; 363 } else { 364 ret = len; 365 poll = CXPOLL_STOPPED; 366 } 367 } 368 369 /* Line status is only updated every second 370 * and the device appears to only react to 371 * START/STOP every second too. Wait 1.5s to 372 * be sure that restart will have an effect. */ 373 if (!strcmp(str_cmd, "restart")) 374 msleep(1500); 375 376 if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) { 377 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); 378 if (ret < 0) { 379 atm_err(instance->usbatm, "change adsl state:" 380 " CHIP_ADSL_LINE_START returned %d\n", ret); 381 382 ret = -EIO; 383 } else { 384 ret = len; 385 poll = CXPOLL_POLLING; 386 } 387 } 388 389 if (!strcmp(str_cmd, "poll")) { 390 ret = len; 391 poll = CXPOLL_POLLING; 392 } 393 394 if (ret == 0) { 395 ret = -EINVAL; 396 poll = -1; 397 } 398 399 if (poll == CXPOLL_POLLING) { 400 mutex_lock(&instance->poll_state_serialize); 401 switch (instance->poll_state) { 402 case CXPOLL_STOPPED: 403 /* start polling */ 404 instance->poll_state = CXPOLL_POLLING; 405 break; 406 407 case CXPOLL_STOPPING: 408 /* abort stop request */ 409 instance->poll_state = CXPOLL_POLLING; 410 fallthrough; 411 case CXPOLL_POLLING: 412 case CXPOLL_SHUTDOWN: 413 /* don't start polling */ 414 poll = -1; 415 } 416 mutex_unlock(&instance->poll_state_serialize); 417 } else if (poll == CXPOLL_STOPPED) { 418 mutex_lock(&instance->poll_state_serialize); 419 /* request stop */ 420 if (instance->poll_state == CXPOLL_POLLING) 421 instance->poll_state = CXPOLL_STOPPING; 422 mutex_unlock(&instance->poll_state_serialize); 423 } 424 425 mutex_unlock(&instance->adsl_state_serialize); 426 427 if (poll == CXPOLL_POLLING) 428 cxacru_poll_status(&instance->poll_work.work); 429 430 return ret; 431 } 432 433 /* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */ 434 435 static ssize_t adsl_config_store(struct device *dev, 436 struct device_attribute *attr, const char *buf, size_t count) 437 { 438 struct cxacru_data *instance = to_usbatm_driver_data( 439 to_usb_interface(dev)); 440 int len = strlen(buf); 441 int ret, pos, num; 442 __le32 data[CMD_PACKET_SIZE / 4]; 443 444 if (!capable(CAP_NET_ADMIN)) 445 return -EACCES; 446 447 if (instance == NULL) 448 return -ENODEV; 449 450 pos = 0; 451 num = 0; 452 while (pos < len) { 453 int tmp; 454 u32 index; 455 u32 value; 456 457 ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp); 458 if (ret < 2) 459 return -EINVAL; 460 if (index > 0x7f) 461 return -EINVAL; 462 if (tmp < 0 || tmp > len - pos) 463 return -EINVAL; 464 pos += tmp; 465 466 /* skip trailing newline */ 467 if (buf[pos] == '\n' && pos == len-1) 468 pos++; 469 470 data[num * 2 + 1] = cpu_to_le32(index); 471 data[num * 2 + 2] = cpu_to_le32(value); 472 num++; 473 474 /* send config values when data buffer is full 475 * or no more data 476 */ 477 if (pos >= len || num >= CMD_MAX_CONFIG) { 478 char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */ 479 480 data[0] = cpu_to_le32(num); 481 ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET, 482 (u8 *) data, 4 + num * 8, NULL, 0); 483 if (ret < 0) { 484 atm_err(instance->usbatm, 485 "set card data returned %d\n", ret); 486 return -EIO; 487 } 488 489 for (tmp = 0; tmp < num; tmp++) 490 snprintf(log + tmp*12, 13, " %02x=%08x", 491 le32_to_cpu(data[tmp * 2 + 1]), 492 le32_to_cpu(data[tmp * 2 + 2])); 493 atm_info(instance->usbatm, "config%s\n", log); 494 num = 0; 495 } 496 } 497 498 return len; 499 } 500 501 /* 502 * All device attributes are included in CXACRU_ALL_FILES 503 * so that the same list can be used multiple times: 504 * INIT (define the device attributes) 505 * CREATE (create all the device files) 506 * REMOVE (remove all the device files) 507 * 508 * With the last two being defined as needed in the functions 509 * they are used in before calling CXACRU_ALL_FILES() 510 */ 511 #define CXACRU_ALL_FILES(_action) \ 512 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE, u32, downstream_rate); \ 513 CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE, u32, upstream_rate); \ 514 CXACRU_ATTR_##_action(CXINF_LINK_STATUS, LINK, link_status); \ 515 CXACRU_ATTR_##_action(CXINF_LINE_STATUS, LINE, line_status); \ 516 CXACRU__ATTR_##_action( mac_address); \ 517 CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN, dB, upstream_snr_margin); \ 518 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN, dB, downstream_snr_margin); \ 519 CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION, dB, upstream_attenuation); \ 520 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION, dB, downstream_attenuation); \ 521 CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER, s8, transmitter_power); \ 522 CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME, u32, upstream_bits_per_frame); \ 523 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32, downstream_bits_per_frame); \ 524 CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS, u32, startup_attempts); \ 525 CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS, u32, upstream_crc_errors); \ 526 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS, u32, downstream_crc_errors); \ 527 CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS, u32, upstream_fec_errors); \ 528 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS, u32, downstream_fec_errors); \ 529 CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS, u32, upstream_hec_errors); \ 530 CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS, u32, downstream_hec_errors); \ 531 CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE, bool, line_startable); \ 532 CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \ 533 CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \ 534 CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \ 535 CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \ 536 CXACRU_CMD_##_action( adsl_state); \ 537 CXACRU_SET_##_action( adsl_config); 538 539 CXACRU_ALL_FILES(INIT); 540 541 static struct attribute *cxacru_attrs[] = { 542 &dev_attr_adsl_config.attr, 543 &dev_attr_adsl_state.attr, 544 &dev_attr_adsl_controller_version.attr, 545 &dev_attr_adsl_headend_environment.attr, 546 &dev_attr_adsl_headend.attr, 547 &dev_attr_modulation.attr, 548 &dev_attr_line_startable.attr, 549 &dev_attr_downstream_hec_errors.attr, 550 &dev_attr_upstream_hec_errors.attr, 551 &dev_attr_downstream_fec_errors.attr, 552 &dev_attr_upstream_fec_errors.attr, 553 &dev_attr_downstream_crc_errors.attr, 554 &dev_attr_upstream_crc_errors.attr, 555 &dev_attr_startup_attempts.attr, 556 &dev_attr_downstream_bits_per_frame.attr, 557 &dev_attr_upstream_bits_per_frame.attr, 558 &dev_attr_transmitter_power.attr, 559 &dev_attr_downstream_attenuation.attr, 560 &dev_attr_upstream_attenuation.attr, 561 &dev_attr_downstream_snr_margin.attr, 562 &dev_attr_upstream_snr_margin.attr, 563 &dev_attr_mac_address.attr, 564 &dev_attr_line_status.attr, 565 &dev_attr_link_status.attr, 566 &dev_attr_upstream_rate.attr, 567 &dev_attr_downstream_rate.attr, 568 NULL, 569 }; 570 ATTRIBUTE_GROUPS(cxacru); 571 572 /* the following three functions are stolen from drivers/usb/core/message.c */ 573 static void cxacru_blocking_completion(struct urb *urb) 574 { 575 complete(urb->context); 576 } 577 578 struct cxacru_timer { 579 struct timer_list timer; 580 struct urb *urb; 581 }; 582 583 static void cxacru_timeout_kill(struct timer_list *t) 584 { 585 struct cxacru_timer *timer = timer_container_of(timer, t, timer); 586 587 usb_unlink_urb(timer->urb); 588 } 589 590 static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, 591 int *actual_length) 592 { 593 struct cxacru_timer timer = { 594 .urb = urb, 595 }; 596 597 timer_setup_on_stack(&timer.timer, cxacru_timeout_kill, 0); 598 mod_timer(&timer.timer, jiffies + msecs_to_jiffies(CMD_TIMEOUT)); 599 wait_for_completion(done); 600 timer_delete_sync(&timer.timer); 601 timer_destroy_on_stack(&timer.timer); 602 603 if (actual_length) 604 *actual_length = urb->actual_length; 605 return urb->status; /* must read status after completion */ 606 } 607 608 static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, 609 u8 *wdata, int wsize, u8 *rdata, int rsize) 610 { 611 int ret, actlen; 612 int offb, offd; 613 const int stride = CMD_PACKET_SIZE - 4; 614 u8 *wbuf = instance->snd_buf; 615 u8 *rbuf = instance->rcv_buf; 616 int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE; 617 int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE; 618 619 if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) { 620 if (printk_ratelimit()) 621 usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n", 622 wbuflen, rbuflen); 623 ret = -ENOMEM; 624 goto err; 625 } 626 627 mutex_lock(&instance->cm_serialize); 628 629 /* submit reading urb before the writing one */ 630 init_completion(&instance->rcv_done); 631 ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL); 632 if (ret < 0) { 633 if (printk_ratelimit()) 634 usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n", 635 cm, ret); 636 goto fail; 637 } 638 639 memset(wbuf, 0, wbuflen); 640 /* handle wsize == 0 */ 641 wbuf[0] = cm; 642 for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) { 643 wbuf[offb] = cm; 644 memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd)); 645 } 646 647 instance->snd_urb->transfer_buffer_length = wbuflen; 648 init_completion(&instance->snd_done); 649 ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL); 650 if (ret < 0) { 651 if (printk_ratelimit()) 652 usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n", 653 cm, ret); 654 goto fail; 655 } 656 657 ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL); 658 if (ret < 0) { 659 if (printk_ratelimit()) 660 usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret); 661 goto fail; 662 } 663 664 ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen); 665 if (ret < 0) { 666 if (printk_ratelimit()) 667 usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret); 668 goto fail; 669 } 670 if (actlen % CMD_PACKET_SIZE || !actlen) { 671 if (printk_ratelimit()) 672 usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n", 673 cm, actlen); 674 ret = -EIO; 675 goto fail; 676 } 677 678 /* check the return status and copy the data to the output buffer, if needed */ 679 for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) { 680 if (rbuf[offb] != cm) { 681 if (printk_ratelimit()) 682 usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n", 683 rbuf[offb], cm); 684 ret = -EIO; 685 goto fail; 686 } 687 if (rbuf[offb + 1] != CM_STATUS_SUCCESS) { 688 if (printk_ratelimit()) 689 usb_err(instance->usbatm, "response to cm %#x failed: %#x\n", 690 cm, rbuf[offb + 1]); 691 ret = -EIO; 692 goto fail; 693 } 694 if (offd >= rsize) 695 break; 696 memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd)); 697 offd += stride; 698 } 699 700 ret = offd; 701 usb_dbg(instance->usbatm, "cm %#x\n", cm); 702 fail: 703 if (ret < 0) 704 usb_kill_urb(instance->rcv_urb); 705 mutex_unlock(&instance->cm_serialize); 706 err: 707 return ret; 708 } 709 710 static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm, 711 u32 *data, int size) 712 { 713 int ret, len; 714 __le32 *buf; 715 int offb; 716 unsigned int offd; 717 const int stride = CMD_PACKET_SIZE / (4 * 2) - 1; 718 int buflen = ((size - 1) / stride + 1 + size * 2) * 4; 719 720 buf = kmalloc(buflen, GFP_KERNEL); 721 if (!buf) 722 return -ENOMEM; 723 724 ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen); 725 if (ret < 0) 726 goto cleanup; 727 728 /* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */ 729 len = ret / 4; 730 for (offb = 0; offb < len; ) { 731 int l = le32_to_cpu(buf[offb++]); 732 733 if (l < 0 || l > stride || l > (len - offb) / 2) { 734 if (printk_ratelimit()) 735 usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n", 736 cm, l); 737 ret = -EIO; 738 goto cleanup; 739 } 740 while (l--) { 741 offd = le32_to_cpu(buf[offb++]); 742 if (offd >= size) { 743 if (printk_ratelimit()) 744 usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n", 745 offd, cm); 746 ret = -EIO; 747 goto cleanup; 748 } 749 data[offd] = le32_to_cpu(buf[offb++]); 750 } 751 } 752 753 ret = 0; 754 755 cleanup: 756 kfree(buf); 757 return ret; 758 } 759 760 static int cxacru_card_status(struct cxacru_data *instance) 761 { 762 int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0); 763 764 if (ret < 0) { /* firmware not loaded */ 765 usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret); 766 return ret; 767 } 768 return 0; 769 } 770 771 static int cxacru_atm_start(struct usbatm_data *usbatm_instance, 772 struct atm_dev *atm_dev) 773 { 774 struct cxacru_data *instance = usbatm_instance->driver_data; 775 struct usb_interface *intf = usbatm_instance->usb_intf; 776 int ret; 777 int start_polling = 1; 778 779 dev_dbg(&intf->dev, "%s\n", __func__); 780 781 /* Read MAC address */ 782 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0, 783 atm_dev->esi, sizeof(atm_dev->esi)); 784 if (ret < 0) { 785 atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret); 786 return ret; 787 } 788 789 /* start ADSL */ 790 mutex_lock(&instance->adsl_state_serialize); 791 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); 792 if (ret < 0) 793 atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret); 794 795 /* Start status polling */ 796 mutex_lock(&instance->poll_state_serialize); 797 switch (instance->poll_state) { 798 case CXPOLL_STOPPED: 799 /* start polling */ 800 instance->poll_state = CXPOLL_POLLING; 801 break; 802 803 case CXPOLL_STOPPING: 804 /* abort stop request */ 805 instance->poll_state = CXPOLL_POLLING; 806 fallthrough; 807 case CXPOLL_POLLING: 808 case CXPOLL_SHUTDOWN: 809 /* don't start polling */ 810 start_polling = 0; 811 } 812 mutex_unlock(&instance->poll_state_serialize); 813 mutex_unlock(&instance->adsl_state_serialize); 814 815 if (start_polling) 816 cxacru_poll_status(&instance->poll_work.work); 817 return 0; 818 } 819 820 static void cxacru_poll_status(struct work_struct *work) 821 { 822 struct cxacru_data *instance = 823 container_of(work, struct cxacru_data, poll_work.work); 824 u32 buf[CXINF_MAX] = {}; 825 struct usbatm_data *usbatm = instance->usbatm; 826 struct atm_dev *atm_dev = usbatm->atm_dev; 827 int keep_polling = 1; 828 int ret; 829 830 ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX); 831 if (ret < 0) { 832 if (ret != -ESHUTDOWN) 833 atm_warn(usbatm, "poll status: error %d\n", ret); 834 835 mutex_lock(&instance->poll_state_serialize); 836 if (instance->poll_state != CXPOLL_SHUTDOWN) { 837 instance->poll_state = CXPOLL_STOPPED; 838 839 if (ret != -ESHUTDOWN) 840 atm_warn(usbatm, "polling disabled, set adsl_state" 841 " to 'start' or 'poll' to resume\n"); 842 } 843 mutex_unlock(&instance->poll_state_serialize); 844 goto reschedule; 845 } 846 847 memcpy(instance->card_info, buf, sizeof(instance->card_info)); 848 849 if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) { 850 instance->adsl_status = buf[CXINF_LINE_STARTABLE]; 851 852 switch (instance->adsl_status) { 853 case 0: 854 atm_info(usbatm, "ADSL state: running\n"); 855 break; 856 857 case 1: 858 atm_info(usbatm, "ADSL state: stopped\n"); 859 break; 860 861 default: 862 atm_info(usbatm, "Unknown adsl status %02x\n", instance->adsl_status); 863 break; 864 } 865 } 866 867 if (instance->line_status == buf[CXINF_LINE_STATUS]) 868 goto reschedule; 869 870 instance->line_status = buf[CXINF_LINE_STATUS]; 871 switch (instance->line_status) { 872 case 0: 873 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 874 atm_info(usbatm, "ADSL line: down\n"); 875 break; 876 877 case 1: 878 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 879 atm_info(usbatm, "ADSL line: attempting to activate\n"); 880 break; 881 882 case 2: 883 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 884 atm_info(usbatm, "ADSL line: training\n"); 885 break; 886 887 case 3: 888 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 889 atm_info(usbatm, "ADSL line: channel analysis\n"); 890 break; 891 892 case 4: 893 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 894 atm_info(usbatm, "ADSL line: exchange\n"); 895 break; 896 897 case 5: 898 atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424; 899 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND); 900 901 atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n", 902 buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]); 903 break; 904 905 case 6: 906 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 907 atm_info(usbatm, "ADSL line: waiting\n"); 908 break; 909 910 case 7: 911 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST); 912 atm_info(usbatm, "ADSL line: initializing\n"); 913 break; 914 915 default: 916 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN); 917 atm_info(usbatm, "Unknown line state %02x\n", instance->line_status); 918 break; 919 } 920 reschedule: 921 922 mutex_lock(&instance->poll_state_serialize); 923 if (instance->poll_state == CXPOLL_STOPPING && 924 instance->adsl_status == 1 && /* stopped */ 925 instance->line_status == 0) /* down */ 926 instance->poll_state = CXPOLL_STOPPED; 927 928 if (instance->poll_state == CXPOLL_STOPPED) 929 keep_polling = 0; 930 mutex_unlock(&instance->poll_state_serialize); 931 932 if (keep_polling) 933 schedule_delayed_work(&instance->poll_work, 934 round_jiffies_relative(POLL_INTERVAL*HZ)); 935 } 936 937 static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, 938 u8 code1, u8 code2, u32 addr, const u8 *data, int size) 939 { 940 int ret; 941 u8 *buf; 942 int offd, offb; 943 const int stride = CMD_PACKET_SIZE - 8; 944 945 buf = (u8 *) __get_free_page(GFP_KERNEL); 946 if (!buf) 947 return -ENOMEM; 948 949 offb = offd = 0; 950 do { 951 int l = min_t(int, stride, size - offd); 952 953 buf[offb++] = fw; 954 buf[offb++] = l; 955 buf[offb++] = code1; 956 buf[offb++] = code2; 957 put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb)); 958 offb += 4; 959 addr += l; 960 if (l) 961 memcpy(buf + offb, data + offd, l); 962 if (l < stride) 963 memset(buf + offb + l, 0, stride - l); 964 offb += stride; 965 offd += stride; 966 if ((offb >= PAGE_SIZE) || (offd >= size)) { 967 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD), 968 buf, offb, NULL, CMD_TIMEOUT); 969 if (ret < 0) { 970 dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw); 971 goto cleanup; 972 } 973 offb = 0; 974 } 975 } while (offd < size); 976 dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw); 977 978 ret = 0; 979 980 cleanup: 981 free_page((unsigned long) buf); 982 return ret; 983 } 984 985 986 static int cxacru_find_firmware(struct cxacru_data *instance, 987 char *phase, const struct firmware **fw_p) 988 { 989 struct usbatm_data *usbatm = instance->usbatm; 990 struct device *dev = &usbatm->usb_intf->dev; 991 char buf[16]; 992 993 sprintf(buf, "cxacru-%s.bin", phase); 994 usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf); 995 996 if (request_firmware(fw_p, buf, dev)) { 997 usb_dbg(usbatm, "no stage %s firmware found\n", phase); 998 return -ENOENT; 999 } 1000 1001 usb_info(usbatm, "found firmware %s\n", buf); 1002 1003 return 0; 1004 } 1005 1006 static int cxacru_heavy_init(struct usbatm_data *usbatm_instance, 1007 struct usb_interface *usb_intf) 1008 { 1009 const struct firmware *fw, *bp; 1010 struct cxacru_data *instance = usbatm_instance->driver_data; 1011 struct usbatm_data *usbatm = instance->usbatm; 1012 struct usb_device *usb_dev = usbatm->usb_dev; 1013 __le16 signature[] = { usb_dev->descriptor.idVendor, 1014 usb_dev->descriptor.idProduct }; 1015 __le32 val; 1016 int ret; 1017 1018 ret = cxacru_find_firmware(instance, "fw", &fw); 1019 if (ret) { 1020 usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n"); 1021 return ret; 1022 } 1023 1024 if (instance->modem_type->boot_rom_patch) { 1025 ret = cxacru_find_firmware(instance, "bp", &bp); 1026 if (ret) { 1027 usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n"); 1028 release_firmware(fw); 1029 return ret; 1030 } 1031 } 1032 1033 /* FirmwarePllFClkValue */ 1034 val = cpu_to_le32(instance->modem_type->pll_f_clk); 1035 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4); 1036 if (ret) { 1037 usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret); 1038 goto done; 1039 } 1040 1041 /* FirmwarePllBClkValue */ 1042 val = cpu_to_le32(instance->modem_type->pll_b_clk); 1043 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4); 1044 if (ret) { 1045 usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret); 1046 goto done; 1047 } 1048 1049 /* Enable SDRAM */ 1050 val = cpu_to_le32(SDRAM_ENA); 1051 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4); 1052 if (ret) { 1053 usb_err(usbatm, "Enable SDRAM failed: %d\n", ret); 1054 goto done; 1055 } 1056 1057 /* Firmware */ 1058 usb_info(usbatm, "loading firmware\n"); 1059 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size); 1060 if (ret) { 1061 usb_err(usbatm, "Firmware upload failed: %d\n", ret); 1062 goto done; 1063 } 1064 1065 /* Boot ROM patch */ 1066 if (instance->modem_type->boot_rom_patch) { 1067 usb_info(usbatm, "loading boot ROM patch\n"); 1068 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size); 1069 if (ret) { 1070 usb_err(usbatm, "Boot ROM patching failed: %d\n", ret); 1071 goto done; 1072 } 1073 } 1074 1075 /* Signature */ 1076 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4); 1077 if (ret) { 1078 usb_err(usbatm, "Signature storing failed: %d\n", ret); 1079 goto done; 1080 } 1081 1082 usb_info(usbatm, "starting device\n"); 1083 if (instance->modem_type->boot_rom_patch) { 1084 val = cpu_to_le32(BR_ADDR); 1085 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); 1086 } else { 1087 ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0); 1088 } 1089 if (ret) { 1090 usb_err(usbatm, "Passing control to firmware failed: %d\n", ret); 1091 goto done; 1092 } 1093 1094 /* Delay to allow firmware to start up. */ 1095 msleep_interruptible(1000); 1096 1097 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD)); 1098 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD)); 1099 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA)); 1100 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA)); 1101 1102 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0); 1103 if (ret < 0) { 1104 usb_err(usbatm, "modem failed to initialize: %d\n", ret); 1105 goto done; 1106 } 1107 1108 done: 1109 if (instance->modem_type->boot_rom_patch) 1110 release_firmware(bp); 1111 release_firmware(fw); 1112 1113 ret = cxacru_card_status(instance); 1114 if (ret) 1115 usb_dbg(usbatm_instance, "modem initialisation failed\n"); 1116 else 1117 usb_dbg(usbatm_instance, "done setting up the modem\n"); 1118 1119 return ret; 1120 } 1121 1122 static int cxacru_bind(struct usbatm_data *usbatm_instance, 1123 struct usb_interface *intf, const struct usb_device_id *id) 1124 { 1125 struct cxacru_data *instance; 1126 struct usb_device *usb_dev = interface_to_usbdev(intf); 1127 struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD]; 1128 static const u8 ep_addrs[] = { 1129 CXACRU_EP_CMD + USB_DIR_IN, 1130 CXACRU_EP_CMD + USB_DIR_OUT, 1131 0}; 1132 int ret; 1133 1134 /* instance init */ 1135 instance = kzalloc_obj(*instance); 1136 if (!instance) 1137 return -ENOMEM; 1138 1139 instance->usbatm = usbatm_instance; 1140 instance->modem_type = (struct cxacru_modem_type *) id->driver_info; 1141 1142 mutex_init(&instance->poll_state_serialize); 1143 instance->poll_state = CXPOLL_STOPPED; 1144 instance->line_status = -1; 1145 instance->adsl_status = -1; 1146 1147 mutex_init(&instance->adsl_state_serialize); 1148 1149 instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL); 1150 if (!instance->rcv_buf) { 1151 usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n"); 1152 ret = -ENOMEM; 1153 goto fail; 1154 } 1155 instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL); 1156 if (!instance->snd_buf) { 1157 usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n"); 1158 ret = -ENOMEM; 1159 goto fail; 1160 } 1161 instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL); 1162 if (!instance->rcv_urb) { 1163 ret = -ENOMEM; 1164 goto fail; 1165 } 1166 instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL); 1167 if (!instance->snd_urb) { 1168 ret = -ENOMEM; 1169 goto fail; 1170 } 1171 1172 if (!cmd_ep) { 1173 usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n"); 1174 ret = -ENODEV; 1175 goto fail; 1176 } 1177 1178 if (usb_endpoint_xfer_int(&cmd_ep->desc)) 1179 ret = usb_check_int_endpoints(intf, ep_addrs); 1180 else 1181 ret = usb_check_bulk_endpoints(intf, ep_addrs); 1182 1183 if (!ret) { 1184 usb_err(usbatm_instance, "cxacru_bind: interface has incorrect endpoints\n"); 1185 ret = -ENODEV; 1186 goto fail; 1187 } 1188 1189 if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1190 == USB_ENDPOINT_XFER_INT) { 1191 usb_fill_int_urb(instance->rcv_urb, 1192 usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD), 1193 instance->rcv_buf, PAGE_SIZE, 1194 cxacru_blocking_completion, &instance->rcv_done, 1); 1195 1196 usb_fill_int_urb(instance->snd_urb, 1197 usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD), 1198 instance->snd_buf, PAGE_SIZE, 1199 cxacru_blocking_completion, &instance->snd_done, 4); 1200 } else { 1201 usb_fill_bulk_urb(instance->rcv_urb, 1202 usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD), 1203 instance->rcv_buf, PAGE_SIZE, 1204 cxacru_blocking_completion, &instance->rcv_done); 1205 1206 usb_fill_bulk_urb(instance->snd_urb, 1207 usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD), 1208 instance->snd_buf, PAGE_SIZE, 1209 cxacru_blocking_completion, &instance->snd_done); 1210 } 1211 1212 mutex_init(&instance->cm_serialize); 1213 1214 INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status); 1215 1216 usbatm_instance->driver_data = instance; 1217 1218 usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT); 1219 1220 return 0; 1221 1222 fail: 1223 free_page((unsigned long) instance->snd_buf); 1224 free_page((unsigned long) instance->rcv_buf); 1225 usb_free_urb(instance->snd_urb); 1226 usb_free_urb(instance->rcv_urb); 1227 kfree(instance); 1228 1229 return ret; 1230 } 1231 1232 static void cxacru_unbind(struct usbatm_data *usbatm_instance, 1233 struct usb_interface *intf) 1234 { 1235 struct cxacru_data *instance = usbatm_instance->driver_data; 1236 usb_dbg(usbatm_instance, "cxacru_unbind entered\n"); 1237 1238 if (!instance) { 1239 usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n"); 1240 return; 1241 } 1242 1243 mutex_lock(&instance->poll_state_serialize); 1244 BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN); 1245 1246 /* stop polling from being stopped or started */ 1247 instance->poll_state = CXPOLL_SHUTDOWN; 1248 mutex_unlock(&instance->poll_state_serialize); 1249 1250 cancel_delayed_work_sync(&instance->poll_work); 1251 1252 usb_kill_urb(instance->snd_urb); 1253 usb_kill_urb(instance->rcv_urb); 1254 usb_free_urb(instance->snd_urb); 1255 usb_free_urb(instance->rcv_urb); 1256 1257 free_page((unsigned long) instance->snd_buf); 1258 free_page((unsigned long) instance->rcv_buf); 1259 1260 kfree(instance); 1261 1262 usbatm_instance->driver_data = NULL; 1263 } 1264 1265 static const struct cxacru_modem_type cxacru_cafe = { 1266 .pll_f_clk = 0x02d874df, 1267 .pll_b_clk = 0x0196a51a, 1268 .boot_rom_patch = 1, 1269 }; 1270 1271 static const struct cxacru_modem_type cxacru_cb00 = { 1272 .pll_f_clk = 0x5, 1273 .pll_b_clk = 0x3, 1274 .boot_rom_patch = 0, 1275 }; 1276 1277 static const struct usb_device_id cxacru_usb_ids[] = { 1278 { /* V = Conexant P = ADSL modem (Euphrates project) */ 1279 USB_DEVICE(0x0572, 0xcafe), .driver_info = (unsigned long) &cxacru_cafe 1280 }, 1281 { /* V = Conexant P = ADSL modem (Hasbani project) */ 1282 USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00 1283 }, 1284 { /* V = Conexant P = ADSL modem */ 1285 USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00 1286 }, 1287 { /* V = Conexant P = ADSL modem (Well PTI-800) */ 1288 USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00 1289 }, 1290 { /* V = Conexant P = ADSL modem */ 1291 USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00 1292 }, 1293 { /* V = Conexant P = ADSL modem (ZTE ZXDSL 852) */ 1294 USB_DEVICE(0x0572, 0xcb07), .driver_info = (unsigned long) &cxacru_cb00 1295 }, 1296 { /* V = Olitec P = ADSL modem version 2 */ 1297 USB_DEVICE(0x08e3, 0x0100), .driver_info = (unsigned long) &cxacru_cafe 1298 }, 1299 { /* V = Olitec P = ADSL modem version 3 */ 1300 USB_DEVICE(0x08e3, 0x0102), .driver_info = (unsigned long) &cxacru_cb00 1301 }, 1302 { /* V = Trust/Amigo Technology Co. P = AMX-CA86U */ 1303 USB_DEVICE(0x0eb0, 0x3457), .driver_info = (unsigned long) &cxacru_cafe 1304 }, 1305 { /* V = Zoom P = 5510 */ 1306 USB_DEVICE(0x1803, 0x5510), .driver_info = (unsigned long) &cxacru_cb00 1307 }, 1308 { /* V = Draytek P = Vigor 318 */ 1309 USB_DEVICE(0x0675, 0x0200), .driver_info = (unsigned long) &cxacru_cb00 1310 }, 1311 { /* V = Zyxel P = 630-C1 aka OMNI ADSL USB (Annex A) */ 1312 USB_DEVICE(0x0586, 0x330a), .driver_info = (unsigned long) &cxacru_cb00 1313 }, 1314 { /* V = Zyxel P = 630-C3 aka OMNI ADSL USB (Annex B) */ 1315 USB_DEVICE(0x0586, 0x330b), .driver_info = (unsigned long) &cxacru_cb00 1316 }, 1317 { /* V = Aethra P = Starmodem UM1020 */ 1318 USB_DEVICE(0x0659, 0x0020), .driver_info = (unsigned long) &cxacru_cb00 1319 }, 1320 { /* V = Aztech Systems P = ? AKA Pirelli AUA-010 */ 1321 USB_DEVICE(0x0509, 0x0812), .driver_info = (unsigned long) &cxacru_cb00 1322 }, 1323 { /* V = Netopia P = Cayman 3341(Annex A)/3351(Annex B) */ 1324 USB_DEVICE(0x100d, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00 1325 }, 1326 { /* V = Netopia P = Cayman 3342(Annex A)/3352(Annex B) */ 1327 USB_DEVICE(0x100d, 0x3342), .driver_info = (unsigned long) &cxacru_cb00 1328 }, 1329 {} 1330 }; 1331 1332 MODULE_DEVICE_TABLE(usb, cxacru_usb_ids); 1333 1334 static struct usbatm_driver cxacru_driver = { 1335 .driver_name = cxacru_driver_name, 1336 .bind = cxacru_bind, 1337 .heavy_init = cxacru_heavy_init, 1338 .unbind = cxacru_unbind, 1339 .atm_start = cxacru_atm_start, 1340 .bulk_in = CXACRU_EP_DATA, 1341 .bulk_out = CXACRU_EP_DATA, 1342 .rx_padding = 3, 1343 .tx_padding = 11, 1344 }; 1345 1346 static int cxacru_usb_probe(struct usb_interface *intf, 1347 const struct usb_device_id *id) 1348 { 1349 struct usb_device *usb_dev = interface_to_usbdev(intf); 1350 char buf[15]; 1351 1352 /* Avoid ADSL routers (cx82310_eth). 1353 * Abort if bDeviceClass is 0xff and iProduct is "USB NET CARD". 1354 */ 1355 if (usb_dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC 1356 && usb_string(usb_dev, usb_dev->descriptor.iProduct, 1357 buf, sizeof(buf)) > 0) { 1358 if (!strcmp(buf, "USB NET CARD")) { 1359 dev_info(&intf->dev, "ignoring cx82310_eth device\n"); 1360 return -ENODEV; 1361 } 1362 } 1363 1364 return usbatm_usb_probe(intf, id, &cxacru_driver); 1365 } 1366 1367 static struct usb_driver cxacru_usb_driver = { 1368 .name = cxacru_driver_name, 1369 .probe = cxacru_usb_probe, 1370 .disconnect = usbatm_usb_disconnect, 1371 .id_table = cxacru_usb_ids, 1372 .dev_groups = cxacru_groups, 1373 }; 1374 1375 module_usb_driver(cxacru_usb_driver); 1376 1377 MODULE_AUTHOR(DRIVER_AUTHOR); 1378 MODULE_DESCRIPTION(DRIVER_DESC); 1379 MODULE_LICENSE("GPL"); 1380