1# SPDX-License-Identifier: GPL-2.0 2# 3# USB device configuration 4# 5 6config USB_OHCI_BIG_ENDIAN_DESC 7 bool 8 9config USB_OHCI_BIG_ENDIAN_MMIO 10 bool 11 12config USB_OHCI_LITTLE_ENDIAN 13 bool 14 default n if PPC_MPC52xx 15 default y 16 17config USB_EHCI_BIG_ENDIAN_MMIO 18 bool 19 20config USB_EHCI_BIG_ENDIAN_DESC 21 bool 22 23config USB_UHCI_BIG_ENDIAN_MMIO 24 bool 25 26config USB_UHCI_BIG_ENDIAN_DESC 27 bool 28 29menuconfig USB_SUPPORT 30 bool "USB support" 31 depends on HAS_IOMEM 32 default y 33 help 34 This option adds core support for Universal Serial Bus (USB). 35 You will also need drivers from the following menu to make use of it. 36 37if USB_SUPPORT 38 39source "drivers/usb/common/Kconfig" 40 41config USB_ARCH_HAS_HCD 42 def_bool y 43 44config USB 45 tristate "Support for Host-side USB" 46 depends on USB_ARCH_HAS_HCD 47 select GENERIC_ALLOCATOR 48 select USB_COMMON 49 select NLS # for UTF-8 strings 50 help 51 Universal Serial Bus (USB) is a specification for a serial bus 52 subsystem which offers higher speeds and more features than the 53 traditional PC serial port. The bus supplies power to peripherals 54 and allows for hot swapping. Up to 127 USB peripherals can be 55 connected to a single USB host in a tree structure. 56 57 The USB host is the root of the tree, the peripherals are the 58 leaves and the inner nodes are special USB devices called hubs. 59 Most PCs now have USB host ports, used to connect peripherals 60 such as scanners, keyboards, mice, modems, cameras, disks, 61 flash memory, network links, and printers to the PC. 62 63 Say Y here if your computer has a host-side USB port and you want 64 to use USB devices. You then need to say Y to at least one of the 65 Host Controller Driver (HCD) options below. Choose a USB 1.1 66 controller, such as "UHCI HCD support" or "OHCI HCD support", 67 and "EHCI HCD (USB 2.0) support" except for older systems that 68 do not have USB 2.0 support. It doesn't normally hurt to select 69 them all if you are not certain. 70 71 If your system has a device-side USB port, used in the peripheral 72 side of the USB protocol, see the "USB Gadget" framework instead. 73 74 After choosing your HCD, then select drivers for the USB peripherals 75 you'll be using. You may want to check out the information provided 76 in <file:Documentation/usb/> and especially the links given in 77 <file:Documentation/usb/usb-help.rst>. 78 79 To compile this driver as a module, choose M here: the 80 module will be called usbcore. 81 82config USB_PCI 83 bool "PCI based USB host interface" 84 depends on PCI 85 default y 86 help 87 Many embedded system SOCs (e.g. freescale T2080) have both 88 PCI and USB modules with the USB module directly controlled by 89 registers and having no relationship to the PCI module. 90 91 If you have such a device you may say N here and PCI related code 92 will not be built in the USB driver. 93 94if USB 95 96source "drivers/usb/core/Kconfig" 97 98source "drivers/usb/mon/Kconfig" 99 100source "drivers/usb/host/Kconfig" 101 102source "drivers/usb/renesas_usbhs/Kconfig" 103 104source "drivers/usb/class/Kconfig" 105 106source "drivers/usb/storage/Kconfig" 107 108source "drivers/usb/image/Kconfig" 109 110source "drivers/usb/usbip/Kconfig" 111 112endif 113 114comment "USB dual-mode controller drivers" 115 116source "drivers/usb/cdns3/Kconfig" 117 118source "drivers/usb/fotg210/Kconfig" 119 120source "drivers/usb/mtu3/Kconfig" 121 122source "drivers/usb/musb/Kconfig" 123 124source "drivers/usb/dwc3/Kconfig" 125 126source "drivers/usb/dwc2/Kconfig" 127 128source "drivers/usb/chipidea/Kconfig" 129 130source "drivers/usb/isp1760/Kconfig" 131 132comment "USB port drivers" 133 134if USB 135 136config USB_USS720 137 tristate "USS720 parport driver" 138 depends on PARPORT 139 select PARPORT_NOT_PC 140 help 141 This driver is for USB parallel port adapters that use the Lucent 142 Technologies USS-720 chip. These cables are plugged into your USB 143 port and provide USB compatibility to peripherals designed with 144 parallel port interfaces. 145 146 The chip has two modes: automatic mode and manual mode. In automatic 147 mode, it looks to the computer like a standard USB printer. Only 148 printers may be connected to the USS-720 in this mode. The generic 149 USB printer driver ("USB Printer support", above) may be used in 150 that mode, and you can say N here if you want to use the chip only 151 in this mode. 152 153 Manual mode is not limited to printers, any parallel port 154 device should work. This driver utilizes manual mode. 155 Note however that some operations are three orders of magnitude 156 slower than on a PCI/ISA Parallel Port, so timing critical 157 applications might not work. 158 159 Say Y here if you own an USS-720 USB->Parport cable and intend to 160 connect anything other than a printer to it. 161 162 To compile this driver as a module, choose M here: the 163 module will be called uss720. 164 165source "drivers/usb/serial/Kconfig" 166 167source "drivers/usb/misc/Kconfig" 168 169source "drivers/usb/atm/Kconfig" 170 171endif # USB 172 173source "drivers/usb/phy/Kconfig" 174 175source "drivers/usb/gadget/Kconfig" 176 177source "drivers/usb/typec/Kconfig" 178 179source "drivers/usb/roles/Kconfig" 180 181endif # USB_SUPPORT 182