xref: /linux/drivers/ufs/host/ufs-qcom.c (revision eb2f932100288dbb881eadfed02e1459c6b9504c)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/acpi.h>
7 #include <linux/clk.h>
8 #include <linux/delay.h>
9 #include <linux/devfreq.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/interconnect.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/phy/phy.h>
15 #include <linux/platform_device.h>
16 #include <linux/reset-controller.h>
17 #include <linux/time.h>
18 
19 #include <soc/qcom/ice.h>
20 
21 #include <ufs/ufshcd.h>
22 #include <ufs/ufshci.h>
23 #include <ufs/ufs_quirks.h>
24 #include <ufs/unipro.h>
25 #include "ufshcd-pltfrm.h"
26 #include "ufs-qcom.h"
27 
28 #define MCQ_QCFGPTR_MASK	GENMASK(7, 0)
29 #define MCQ_QCFGPTR_UNIT	0x200
30 #define MCQ_SQATTR_OFFSET(c) \
31 	((((c) >> 16) & MCQ_QCFGPTR_MASK) * MCQ_QCFGPTR_UNIT)
32 #define MCQ_QCFG_SIZE	0x40
33 
34 enum {
35 	TSTBUS_UAWM,
36 	TSTBUS_UARM,
37 	TSTBUS_TXUC,
38 	TSTBUS_RXUC,
39 	TSTBUS_DFC,
40 	TSTBUS_TRLUT,
41 	TSTBUS_TMRLUT,
42 	TSTBUS_OCSC,
43 	TSTBUS_UTP_HCI,
44 	TSTBUS_COMBINED,
45 	TSTBUS_WRAPPER,
46 	TSTBUS_UNIPRO,
47 	TSTBUS_MAX,
48 };
49 
50 #define QCOM_UFS_MAX_GEAR 4
51 #define QCOM_UFS_MAX_LANE 2
52 
53 enum {
54 	MODE_MIN,
55 	MODE_PWM,
56 	MODE_HS_RA,
57 	MODE_HS_RB,
58 	MODE_MAX,
59 };
60 
61 static const struct __ufs_qcom_bw_table {
62 	u32 mem_bw;
63 	u32 cfg_bw;
64 } ufs_qcom_bw_table[MODE_MAX + 1][QCOM_UFS_MAX_GEAR + 1][QCOM_UFS_MAX_LANE + 1] = {
65 	[MODE_MIN][0][0]		   = { 0,		0 }, /* Bandwidth values in KB/s */
66 	[MODE_PWM][UFS_PWM_G1][UFS_LANE_1] = { 922,		1000 },
67 	[MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844,		1000 },
68 	[MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688,		1000 },
69 	[MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376,		1000 },
70 	[MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844,		1000 },
71 	[MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688,		1000 },
72 	[MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376,		1000 },
73 	[MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752,		1000 },
74 	[MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796,		1000 },
75 	[MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591,		1000 },
76 	[MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582,	102400 },
77 	[MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200,	204800 },
78 	[MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591,		1000 },
79 	[MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181,		1000 },
80 	[MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582,	204800 },
81 	[MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200,	409600 },
82 	[MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422,		1000 },
83 	[MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189,		1000 },
84 	[MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582,	102400 },
85 	[MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200,	204800 },
86 	[MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189,		1000 },
87 	[MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378,		1000 },
88 	[MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582,	204800 },
89 	[MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200,	409600 },
90 	[MODE_MAX][0][0]		    = { 7643136,	307200 },
91 };
92 
93 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
94 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up);
95 
96 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
97 {
98 	return container_of(rcd, struct ufs_qcom_host, rcdev);
99 }
100 
101 #ifdef CONFIG_SCSI_UFS_CRYPTO
102 
103 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host)
104 {
105 	if (host->hba->caps & UFSHCD_CAP_CRYPTO)
106 		qcom_ice_enable(host->ice);
107 }
108 
109 static int ufs_qcom_ice_init(struct ufs_qcom_host *host)
110 {
111 	struct ufs_hba *hba = host->hba;
112 	struct device *dev = hba->dev;
113 	struct qcom_ice *ice;
114 
115 	ice = of_qcom_ice_get(dev);
116 	if (ice == ERR_PTR(-EOPNOTSUPP)) {
117 		dev_warn(dev, "Disabling inline encryption support\n");
118 		ice = NULL;
119 	}
120 
121 	if (IS_ERR_OR_NULL(ice))
122 		return PTR_ERR_OR_ZERO(ice);
123 
124 	host->ice = ice;
125 	hba->caps |= UFSHCD_CAP_CRYPTO;
126 
127 	return 0;
128 }
129 
130 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
131 {
132 	if (host->hba->caps & UFSHCD_CAP_CRYPTO)
133 		return qcom_ice_resume(host->ice);
134 
135 	return 0;
136 }
137 
138 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host)
139 {
140 	if (host->hba->caps & UFSHCD_CAP_CRYPTO)
141 		return qcom_ice_suspend(host->ice);
142 
143 	return 0;
144 }
145 
146 static int ufs_qcom_ice_program_key(struct ufs_hba *hba,
147 				    const union ufs_crypto_cfg_entry *cfg,
148 				    int slot)
149 {
150 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
151 	union ufs_crypto_cap_entry cap;
152 	bool config_enable =
153 		cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE;
154 
155 	/* Only AES-256-XTS has been tested so far. */
156 	cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
157 	if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
158 	    cap.key_size != UFS_CRYPTO_KEY_SIZE_256)
159 		return -EOPNOTSUPP;
160 
161 	if (config_enable)
162 		return qcom_ice_program_key(host->ice,
163 					    QCOM_ICE_CRYPTO_ALG_AES_XTS,
164 					    QCOM_ICE_CRYPTO_KEY_SIZE_256,
165 					    cfg->crypto_key,
166 					    cfg->data_unit_size, slot);
167 	else
168 		return qcom_ice_evict_key(host->ice, slot);
169 }
170 
171 #else
172 
173 #define ufs_qcom_ice_program_key NULL
174 
175 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host)
176 {
177 }
178 
179 static int ufs_qcom_ice_init(struct ufs_qcom_host *host)
180 {
181 	return 0;
182 }
183 
184 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
185 {
186 	return 0;
187 }
188 
189 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host)
190 {
191 	return 0;
192 }
193 #endif
194 
195 static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
196 {
197 	if (!host->is_lane_clks_enabled)
198 		return;
199 
200 	clk_bulk_disable_unprepare(host->num_clks, host->clks);
201 
202 	host->is_lane_clks_enabled = false;
203 }
204 
205 static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
206 {
207 	int err;
208 
209 	err = clk_bulk_prepare_enable(host->num_clks, host->clks);
210 	if (err)
211 		return err;
212 
213 	host->is_lane_clks_enabled = true;
214 
215 	return 0;
216 }
217 
218 static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
219 {
220 	int err;
221 	struct device *dev = host->hba->dev;
222 
223 	if (has_acpi_companion(dev))
224 		return 0;
225 
226 	err = devm_clk_bulk_get_all(dev, &host->clks);
227 	if (err <= 0)
228 		return err;
229 
230 	host->num_clks = err;
231 
232 	return 0;
233 }
234 
235 static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
236 {
237 	int err;
238 	u32 tx_fsm_val;
239 	unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
240 
241 	do {
242 		err = ufshcd_dme_get(hba,
243 				UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
244 					UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
245 				&tx_fsm_val);
246 		if (err || tx_fsm_val == TX_FSM_HIBERN8)
247 			break;
248 
249 		/* sleep for max. 200us */
250 		usleep_range(100, 200);
251 	} while (time_before(jiffies, timeout));
252 
253 	/*
254 	 * we might have scheduled out for long during polling so
255 	 * check the state again.
256 	 */
257 	if (time_after(jiffies, timeout))
258 		err = ufshcd_dme_get(hba,
259 				UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
260 					UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
261 				&tx_fsm_val);
262 
263 	if (err) {
264 		dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
265 				__func__, err);
266 	} else if (tx_fsm_val != TX_FSM_HIBERN8) {
267 		err = tx_fsm_val;
268 		dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
269 				__func__, err);
270 	}
271 
272 	return err;
273 }
274 
275 static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
276 {
277 	ufshcd_rmwl(host->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1);
278 
279 	if (host->hw_ver.major >= 0x05)
280 		ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0);
281 
282 	/* make sure above configuration is applied before we return */
283 	mb();
284 }
285 
286 /*
287  * ufs_qcom_host_reset - reset host controller and PHY
288  */
289 static int ufs_qcom_host_reset(struct ufs_hba *hba)
290 {
291 	int ret;
292 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
293 	bool reenable_intr;
294 
295 	if (!host->core_reset)
296 		return 0;
297 
298 	reenable_intr = hba->is_irq_enabled;
299 	ufshcd_disable_irq(hba);
300 
301 	ret = reset_control_assert(host->core_reset);
302 	if (ret) {
303 		dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
304 				 __func__, ret);
305 		return ret;
306 	}
307 
308 	/*
309 	 * The hardware requirement for delay between assert/deassert
310 	 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
311 	 * ~125us (4/32768). To be on the safe side add 200us delay.
312 	 */
313 	usleep_range(200, 210);
314 
315 	ret = reset_control_deassert(host->core_reset);
316 	if (ret) {
317 		dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
318 				 __func__, ret);
319 		return ret;
320 	}
321 
322 	usleep_range(1000, 1100);
323 
324 	if (reenable_intr)
325 		ufshcd_enable_irq(hba);
326 
327 	return 0;
328 }
329 
330 static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba)
331 {
332 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
333 
334 	if (host->hw_ver.major >= 0x4)
335 		return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0));
336 
337 	/* Default is HS-G3 */
338 	return UFS_HS_G3;
339 }
340 
341 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
342 {
343 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
344 	struct ufs_host_params *host_params = &host->host_params;
345 	struct phy *phy = host->generic_phy;
346 	enum phy_mode mode;
347 	int ret;
348 
349 	/*
350 	 * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations.
351 	 * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A,
352 	 * so that the subsequent power mode change shall stick to Rate-A.
353 	 */
354 	if (host->hw_ver.major == 0x5) {
355 		if (host->phy_gear == UFS_HS_G5)
356 			host_params->hs_rate = PA_HS_MODE_A;
357 		else
358 			host_params->hs_rate = PA_HS_MODE_B;
359 	}
360 
361 	mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A;
362 
363 	/* Reset UFS Host Controller and PHY */
364 	ret = ufs_qcom_host_reset(hba);
365 	if (ret)
366 		return ret;
367 
368 	/* phy initialization - calibrate the phy */
369 	ret = phy_init(phy);
370 	if (ret) {
371 		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
372 			__func__, ret);
373 		return ret;
374 	}
375 
376 	ret = phy_set_mode_ext(phy, mode, host->phy_gear);
377 	if (ret)
378 		goto out_disable_phy;
379 
380 	/* power on phy - start serdes and phy's power and clocks */
381 	ret = phy_power_on(phy);
382 	if (ret) {
383 		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
384 			__func__, ret);
385 		goto out_disable_phy;
386 	}
387 
388 	ufs_qcom_select_unipro_mode(host);
389 
390 	return 0;
391 
392 out_disable_phy:
393 	phy_exit(phy);
394 
395 	return ret;
396 }
397 
398 /*
399  * The UTP controller has a number of internal clock gating cells (CGCs).
400  * Internal hardware sub-modules within the UTP controller control the CGCs.
401  * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
402  * in a specific operation, UTP controller CGCs are by default disabled and
403  * this function enables them (after every UFS link startup) to save some power
404  * leakage.
405  */
406 static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
407 {
408 	ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL,
409 		    REG_UFS_CFG2);
410 
411 	/* Ensure that HW clock gating is enabled before next operations */
412 	mb();
413 }
414 
415 static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
416 				      enum ufs_notify_change_status status)
417 {
418 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
419 	int err;
420 
421 	switch (status) {
422 	case PRE_CHANGE:
423 		err = ufs_qcom_power_up_sequence(hba);
424 		if (err)
425 			return err;
426 
427 		/*
428 		 * The PHY PLL output is the source of tx/rx lane symbol
429 		 * clocks, hence, enable the lane clocks only after PHY
430 		 * is initialized.
431 		 */
432 		err = ufs_qcom_enable_lane_clks(host);
433 		break;
434 	case POST_CHANGE:
435 		/* check if UFS PHY moved from DISABLED to HIBERN8 */
436 		err = ufs_qcom_check_hibern8(hba);
437 		ufs_qcom_enable_hw_clk_gating(hba);
438 		ufs_qcom_ice_enable(host);
439 		break;
440 	default:
441 		dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
442 		err = -EINVAL;
443 		break;
444 	}
445 	return err;
446 }
447 
448 /**
449  * ufs_qcom_cfg_timers - Configure ufs qcom cfg timers
450  *
451  * @hba: host controller instance
452  * @gear: Current operating gear
453  * @hs: current power mode
454  * @rate: current operating rate (A or B)
455  * @update_link_startup_timer: indicate if link_start ongoing
456  * @is_pre_scale_up: flag to check if pre scale up condition.
457  * Return: zero for success and non-zero in case of a failure.
458  */
459 static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
460 			       u32 hs, u32 rate, bool update_link_startup_timer,
461 			       bool is_pre_scale_up)
462 {
463 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
464 	struct ufs_clk_info *clki;
465 	unsigned long core_clk_rate = 0;
466 	u32 core_clk_cycles_per_us;
467 
468 	/*
469 	 * UTP controller uses SYS1CLK_1US_REG register for Interrupt
470 	 * Aggregation logic.
471 	 * It is mandatory to write SYS1CLK_1US_REG register on UFS host
472 	 * controller V4.0.0 onwards.
473 	 */
474 	if (host->hw_ver.major < 4 && !ufshcd_is_intr_aggr_allowed(hba))
475 		return 0;
476 
477 	if (gear == 0) {
478 		dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
479 		return -EINVAL;
480 	}
481 
482 	list_for_each_entry(clki, &hba->clk_list_head, list) {
483 		if (!strcmp(clki->name, "core_clk")) {
484 			if (is_pre_scale_up)
485 				core_clk_rate = clki->max_freq;
486 			else
487 				core_clk_rate = clk_get_rate(clki->clk);
488 			break;
489 		}
490 
491 	}
492 
493 	/* If frequency is smaller than 1MHz, set to 1MHz */
494 	if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
495 		core_clk_rate = DEFAULT_CLK_RATE_HZ;
496 
497 	core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
498 	if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
499 		ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
500 		/*
501 		 * make sure above write gets applied before we return from
502 		 * this function.
503 		 */
504 		mb();
505 	}
506 
507 	return 0;
508 }
509 
510 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
511 					enum ufs_notify_change_status status)
512 {
513 	int err = 0;
514 
515 	switch (status) {
516 	case PRE_CHANGE:
517 		if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
518 					0, true, false)) {
519 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
520 				__func__);
521 			return -EINVAL;
522 		}
523 
524 		err = ufs_qcom_set_core_clk_ctrl(hba, true);
525 		if (err)
526 			dev_err(hba->dev, "cfg core clk ctrl failed\n");
527 		/*
528 		 * Some UFS devices (and may be host) have issues if LCC is
529 		 * enabled. So we are setting PA_Local_TX_LCC_Enable to 0
530 		 * before link startup which will make sure that both host
531 		 * and device TX LCC are disabled once link startup is
532 		 * completed.
533 		 */
534 		if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
535 			err = ufshcd_disable_host_tx_lcc(hba);
536 
537 		break;
538 	default:
539 		break;
540 	}
541 
542 	return err;
543 }
544 
545 static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted)
546 {
547 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
548 
549 	/* reset gpio is optional */
550 	if (!host->device_reset)
551 		return;
552 
553 	gpiod_set_value_cansleep(host->device_reset, asserted);
554 }
555 
556 static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
557 	enum ufs_notify_change_status status)
558 {
559 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
560 	struct phy *phy = host->generic_phy;
561 
562 	if (status == PRE_CHANGE)
563 		return 0;
564 
565 	if (ufs_qcom_is_link_off(hba)) {
566 		/*
567 		 * Disable the tx/rx lane symbol clocks before PHY is
568 		 * powered down as the PLL source should be disabled
569 		 * after downstream clocks are disabled.
570 		 */
571 		ufs_qcom_disable_lane_clks(host);
572 		phy_power_off(phy);
573 
574 		/* reset the connected UFS device during power down */
575 		ufs_qcom_device_reset_ctrl(hba, true);
576 
577 	} else if (!ufs_qcom_is_link_active(hba)) {
578 		ufs_qcom_disable_lane_clks(host);
579 	}
580 
581 	return ufs_qcom_ice_suspend(host);
582 }
583 
584 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
585 {
586 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
587 	struct phy *phy = host->generic_phy;
588 	int err;
589 
590 	if (ufs_qcom_is_link_off(hba)) {
591 		err = phy_power_on(phy);
592 		if (err) {
593 			dev_err(hba->dev, "%s: failed PHY power on: %d\n",
594 				__func__, err);
595 			return err;
596 		}
597 
598 		err = ufs_qcom_enable_lane_clks(host);
599 		if (err)
600 			return err;
601 
602 	} else if (!ufs_qcom_is_link_active(hba)) {
603 		err = ufs_qcom_enable_lane_clks(host);
604 		if (err)
605 			return err;
606 	}
607 
608 	return ufs_qcom_ice_resume(host);
609 }
610 
611 static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
612 {
613 	if (host->dev_ref_clk_ctrl_mmio &&
614 	    (enable ^ host->is_dev_ref_clk_enabled)) {
615 		u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
616 
617 		if (enable)
618 			temp |= host->dev_ref_clk_en_mask;
619 		else
620 			temp &= ~host->dev_ref_clk_en_mask;
621 
622 		/*
623 		 * If we are here to disable this clock it might be immediately
624 		 * after entering into hibern8 in which case we need to make
625 		 * sure that device ref_clk is active for specific time after
626 		 * hibern8 enter.
627 		 */
628 		if (!enable) {
629 			unsigned long gating_wait;
630 
631 			gating_wait = host->hba->dev_info.clk_gating_wait_us;
632 			if (!gating_wait) {
633 				udelay(1);
634 			} else {
635 				/*
636 				 * bRefClkGatingWaitTime defines the minimum
637 				 * time for which the reference clock is
638 				 * required by device during transition from
639 				 * HS-MODE to LS-MODE or HIBERN8 state. Give it
640 				 * more delay to be on the safe side.
641 				 */
642 				gating_wait += 10;
643 				usleep_range(gating_wait, gating_wait + 10);
644 			}
645 		}
646 
647 		writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
648 
649 		/*
650 		 * Make sure the write to ref_clk reaches the destination and
651 		 * not stored in a Write Buffer (WB).
652 		 */
653 		readl(host->dev_ref_clk_ctrl_mmio);
654 
655 		/*
656 		 * If we call hibern8 exit after this, we need to make sure that
657 		 * device ref_clk is stable for at least 1us before the hibern8
658 		 * exit command.
659 		 */
660 		if (enable)
661 			udelay(1);
662 
663 		host->is_dev_ref_clk_enabled = enable;
664 	}
665 }
666 
667 static int ufs_qcom_icc_set_bw(struct ufs_qcom_host *host, u32 mem_bw, u32 cfg_bw)
668 {
669 	struct device *dev = host->hba->dev;
670 	int ret;
671 
672 	ret = icc_set_bw(host->icc_ddr, 0, mem_bw);
673 	if (ret < 0) {
674 		dev_err(dev, "failed to set bandwidth request: %d\n", ret);
675 		return ret;
676 	}
677 
678 	ret = icc_set_bw(host->icc_cpu, 0, cfg_bw);
679 	if (ret < 0) {
680 		dev_err(dev, "failed to set bandwidth request: %d\n", ret);
681 		return ret;
682 	}
683 
684 	return 0;
685 }
686 
687 static struct __ufs_qcom_bw_table ufs_qcom_get_bw_table(struct ufs_qcom_host *host)
688 {
689 	struct ufs_pa_layer_attr *p = &host->dev_req_params;
690 	int gear = max_t(u32, p->gear_rx, p->gear_tx);
691 	int lane = max_t(u32, p->lane_rx, p->lane_tx);
692 
693 	if (ufshcd_is_hs_mode(p)) {
694 		if (p->hs_rate == PA_HS_MODE_B)
695 			return ufs_qcom_bw_table[MODE_HS_RB][gear][lane];
696 		else
697 			return ufs_qcom_bw_table[MODE_HS_RA][gear][lane];
698 	} else {
699 		return ufs_qcom_bw_table[MODE_PWM][gear][lane];
700 	}
701 }
702 
703 static int ufs_qcom_icc_update_bw(struct ufs_qcom_host *host)
704 {
705 	struct __ufs_qcom_bw_table bw_table;
706 
707 	bw_table = ufs_qcom_get_bw_table(host);
708 
709 	return ufs_qcom_icc_set_bw(host, bw_table.mem_bw, bw_table.cfg_bw);
710 }
711 
712 static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
713 				enum ufs_notify_change_status status,
714 				struct ufs_pa_layer_attr *dev_max_params,
715 				struct ufs_pa_layer_attr *dev_req_params)
716 {
717 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
718 	struct ufs_host_params *host_params = &host->host_params;
719 	int ret = 0;
720 
721 	if (!dev_req_params) {
722 		pr_err("%s: incoming dev_req_params is NULL\n", __func__);
723 		return -EINVAL;
724 	}
725 
726 	switch (status) {
727 	case PRE_CHANGE:
728 		ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params);
729 		if (ret) {
730 			dev_err(hba->dev, "%s: failed to determine capabilities\n",
731 					__func__);
732 			return ret;
733 		}
734 
735 		/*
736 		 * During UFS driver probe, always update the PHY gear to match the negotiated
737 		 * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled,
738 		 * the second init can program the optimal PHY settings. This allows one to start
739 		 * the first init with either the minimum or the maximum support gear.
740 		 */
741 		if (hba->ufshcd_state == UFSHCD_STATE_RESET)
742 			host->phy_gear = dev_req_params->gear_tx;
743 
744 		/* enable the device ref clock before changing to HS mode */
745 		if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
746 			ufshcd_is_hs_mode(dev_req_params))
747 			ufs_qcom_dev_ref_clk_ctrl(host, true);
748 
749 		if (host->hw_ver.major >= 0x4) {
750 			ufshcd_dme_configure_adapt(hba,
751 						dev_req_params->gear_tx,
752 						PA_INITIAL_ADAPT);
753 		}
754 		break;
755 	case POST_CHANGE:
756 		if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
757 					dev_req_params->pwr_rx,
758 					dev_req_params->hs_rate, false, false)) {
759 			dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
760 				__func__);
761 			/*
762 			 * we return error code at the end of the routine,
763 			 * but continue to configure UFS_PHY_TX_LANE_ENABLE
764 			 * and bus voting as usual
765 			 */
766 			ret = -EINVAL;
767 		}
768 
769 		/* cache the power mode parameters to use internally */
770 		memcpy(&host->dev_req_params,
771 				dev_req_params, sizeof(*dev_req_params));
772 
773 		ufs_qcom_icc_update_bw(host);
774 
775 		/* disable the device ref clock if entered PWM mode */
776 		if (ufshcd_is_hs_mode(&hba->pwr_info) &&
777 			!ufshcd_is_hs_mode(dev_req_params))
778 			ufs_qcom_dev_ref_clk_ctrl(host, false);
779 		break;
780 	default:
781 		ret = -EINVAL;
782 		break;
783 	}
784 
785 	return ret;
786 }
787 
788 static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
789 {
790 	int err;
791 	u32 pa_vs_config_reg1;
792 
793 	err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
794 			     &pa_vs_config_reg1);
795 	if (err)
796 		return err;
797 
798 	/* Allow extension of MSB bits of PA_SaveConfigTime attribute */
799 	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
800 			    (pa_vs_config_reg1 | (1 << 12)));
801 }
802 
803 static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
804 {
805 	int err = 0;
806 
807 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
808 		err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
809 
810 	if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC)
811 		hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
812 
813 	return err;
814 }
815 
816 static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
817 {
818 	return ufshci_version(2, 0);
819 }
820 
821 /**
822  * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
823  * @hba: host controller instance
824  *
825  * QCOM UFS host controller might have some non standard behaviours (quirks)
826  * than what is specified by UFSHCI specification. Advertise all such
827  * quirks to standard UFS host controller driver so standard takes them into
828  * account.
829  */
830 static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
831 {
832 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
833 
834 	if (host->hw_ver.major == 0x2)
835 		hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
836 
837 	if (host->hw_ver.major > 0x3)
838 		hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
839 }
840 
841 static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host)
842 {
843 	struct ufs_host_params *host_params = &host->host_params;
844 	u32 val, dev_major;
845 
846 	host->phy_gear = host_params->hs_tx_gear;
847 
848 	if (host->hw_ver.major < 0x4) {
849 		/*
850 		 * For controllers whose major HW version is < 4, power up the
851 		 * PHY using minimum supported gear (UFS_HS_G2). Switching to
852 		 * max gear will be performed during reinit if supported.
853 		 * For newer controllers, whose major HW version is >= 4, power
854 		 * up the PHY using max supported gear.
855 		 */
856 		host->phy_gear = UFS_HS_G2;
857 	} else if (host->hw_ver.major >= 0x5) {
858 		val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG);
859 		dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val);
860 
861 		/*
862 		 * Since the UFS device version is populated, let's remove the
863 		 * REINIT quirk as the negotiated gear won't change during boot.
864 		 * So there is no need to do reinit.
865 		 */
866 		if (dev_major != 0x0)
867 			host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
868 
869 		/*
870 		 * For UFS 3.1 device and older, power up the PHY using HS-G4
871 		 * PHY gear to save power.
872 		 */
873 		if (dev_major > 0x0 && dev_major < 0x4)
874 			host->phy_gear = UFS_HS_G4;
875 	}
876 }
877 
878 static void ufs_qcom_set_host_params(struct ufs_hba *hba)
879 {
880 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
881 	struct ufs_host_params *host_params = &host->host_params;
882 
883 	ufshcd_init_host_params(host_params);
884 
885 	/* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */
886 	host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba);
887 }
888 
889 static void ufs_qcom_set_caps(struct ufs_hba *hba)
890 {
891 	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
892 	hba->caps |= UFSHCD_CAP_CLK_SCALING | UFSHCD_CAP_WB_WITH_CLK_SCALING;
893 	hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
894 	hba->caps |= UFSHCD_CAP_WB_EN;
895 	hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE;
896 	hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND;
897 }
898 
899 /**
900  * ufs_qcom_setup_clocks - enables/disable clocks
901  * @hba: host controller instance
902  * @on: If true, enable clocks else disable them.
903  * @status: PRE_CHANGE or POST_CHANGE notify
904  *
905  * Return: 0 on success, non-zero on failure.
906  */
907 static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
908 				 enum ufs_notify_change_status status)
909 {
910 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
911 
912 	/*
913 	 * In case ufs_qcom_init() is not yet done, simply ignore.
914 	 * This ufs_qcom_setup_clocks() shall be called from
915 	 * ufs_qcom_init() after init is done.
916 	 */
917 	if (!host)
918 		return 0;
919 
920 	switch (status) {
921 	case PRE_CHANGE:
922 		if (on) {
923 			ufs_qcom_icc_update_bw(host);
924 		} else {
925 			if (!ufs_qcom_is_link_active(hba)) {
926 				/* disable device ref_clk */
927 				ufs_qcom_dev_ref_clk_ctrl(host, false);
928 			}
929 		}
930 		break;
931 	case POST_CHANGE:
932 		if (on) {
933 			/* enable the device ref clock for HS mode*/
934 			if (ufshcd_is_hs_mode(&hba->pwr_info))
935 				ufs_qcom_dev_ref_clk_ctrl(host, true);
936 		} else {
937 			ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MIN][0][0].mem_bw,
938 					    ufs_qcom_bw_table[MODE_MIN][0][0].cfg_bw);
939 		}
940 		break;
941 	}
942 
943 	return 0;
944 }
945 
946 static int
947 ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
948 {
949 	struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
950 
951 	ufs_qcom_assert_reset(host->hba);
952 	/* provide 1ms delay to let the reset pulse propagate. */
953 	usleep_range(1000, 1100);
954 	return 0;
955 }
956 
957 static int
958 ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
959 {
960 	struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
961 
962 	ufs_qcom_deassert_reset(host->hba);
963 
964 	/*
965 	 * after reset deassertion, phy will need all ref clocks,
966 	 * voltage, current to settle down before starting serdes.
967 	 */
968 	usleep_range(1000, 1100);
969 	return 0;
970 }
971 
972 static const struct reset_control_ops ufs_qcom_reset_ops = {
973 	.assert = ufs_qcom_reset_assert,
974 	.deassert = ufs_qcom_reset_deassert,
975 };
976 
977 static int ufs_qcom_icc_init(struct ufs_qcom_host *host)
978 {
979 	struct device *dev = host->hba->dev;
980 	int ret;
981 
982 	host->icc_ddr = devm_of_icc_get(dev, "ufs-ddr");
983 	if (IS_ERR(host->icc_ddr))
984 		return dev_err_probe(dev, PTR_ERR(host->icc_ddr),
985 				    "failed to acquire interconnect path\n");
986 
987 	host->icc_cpu = devm_of_icc_get(dev, "cpu-ufs");
988 	if (IS_ERR(host->icc_cpu))
989 		return dev_err_probe(dev, PTR_ERR(host->icc_cpu),
990 				    "failed to acquire interconnect path\n");
991 
992 	/*
993 	 * Set Maximum bandwidth vote before initializing the UFS controller and
994 	 * device. Ideally, a minimal interconnect vote would suffice for the
995 	 * initialization, but a max vote would allow faster initialization.
996 	 */
997 	ret = ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MAX][0][0].mem_bw,
998 				  ufs_qcom_bw_table[MODE_MAX][0][0].cfg_bw);
999 	if (ret < 0)
1000 		return dev_err_probe(dev, ret, "failed to set bandwidth request\n");
1001 
1002 	return 0;
1003 }
1004 
1005 /**
1006  * ufs_qcom_init - bind phy with controller
1007  * @hba: host controller instance
1008  *
1009  * Binds PHY with controller and powers up PHY enabling clocks
1010  * and regulators.
1011  *
1012  * Return: -EPROBE_DEFER if binding fails, returns negative error
1013  * on phy power up failure and returns zero on success.
1014  */
1015 static int ufs_qcom_init(struct ufs_hba *hba)
1016 {
1017 	int err;
1018 	struct device *dev = hba->dev;
1019 	struct ufs_qcom_host *host;
1020 	struct ufs_clk_info *clki;
1021 
1022 	host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
1023 	if (!host)
1024 		return -ENOMEM;
1025 
1026 	/* Make a two way bind between the qcom host and the hba */
1027 	host->hba = hba;
1028 	ufshcd_set_variant(hba, host);
1029 
1030 	/* Setup the optional reset control of HCI */
1031 	host->core_reset = devm_reset_control_get_optional(hba->dev, "rst");
1032 	if (IS_ERR(host->core_reset)) {
1033 		err = dev_err_probe(dev, PTR_ERR(host->core_reset),
1034 				    "Failed to get reset control\n");
1035 		goto out_variant_clear;
1036 	}
1037 
1038 	/* Fire up the reset controller. Failure here is non-fatal. */
1039 	host->rcdev.of_node = dev->of_node;
1040 	host->rcdev.ops = &ufs_qcom_reset_ops;
1041 	host->rcdev.owner = dev->driver->owner;
1042 	host->rcdev.nr_resets = 1;
1043 	err = devm_reset_controller_register(dev, &host->rcdev);
1044 	if (err)
1045 		dev_warn(dev, "Failed to register reset controller\n");
1046 
1047 	if (!has_acpi_companion(dev)) {
1048 		host->generic_phy = devm_phy_get(dev, "ufsphy");
1049 		if (IS_ERR(host->generic_phy)) {
1050 			err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n");
1051 			goto out_variant_clear;
1052 		}
1053 	}
1054 
1055 	err = ufs_qcom_icc_init(host);
1056 	if (err)
1057 		goto out_variant_clear;
1058 
1059 	host->device_reset = devm_gpiod_get_optional(dev, "reset",
1060 						     GPIOD_OUT_HIGH);
1061 	if (IS_ERR(host->device_reset)) {
1062 		err = dev_err_probe(dev, PTR_ERR(host->device_reset),
1063 				    "Failed to acquire device reset gpio\n");
1064 		goto out_variant_clear;
1065 	}
1066 
1067 	ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
1068 		&host->hw_ver.minor, &host->hw_ver.step);
1069 
1070 	host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
1071 	host->dev_ref_clk_en_mask = BIT(26);
1072 
1073 	list_for_each_entry(clki, &hba->clk_list_head, list) {
1074 		if (!strcmp(clki->name, "core_clk_unipro"))
1075 			clki->keep_link_active = true;
1076 	}
1077 
1078 	err = ufs_qcom_init_lane_clks(host);
1079 	if (err)
1080 		goto out_variant_clear;
1081 
1082 	ufs_qcom_set_caps(hba);
1083 	ufs_qcom_advertise_quirks(hba);
1084 	ufs_qcom_set_host_params(hba);
1085 	ufs_qcom_set_phy_gear(host);
1086 
1087 	err = ufs_qcom_ice_init(host);
1088 	if (err)
1089 		goto out_variant_clear;
1090 
1091 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
1092 
1093 	ufs_qcom_get_default_testbus_cfg(host);
1094 	err = ufs_qcom_testbus_config(host);
1095 	if (err)
1096 		/* Failure is non-fatal */
1097 		dev_warn(dev, "%s: failed to configure the testbus %d\n",
1098 				__func__, err);
1099 
1100 	return 0;
1101 
1102 out_variant_clear:
1103 	ufshcd_set_variant(hba, NULL);
1104 
1105 	return err;
1106 }
1107 
1108 static void ufs_qcom_exit(struct ufs_hba *hba)
1109 {
1110 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1111 
1112 	ufs_qcom_disable_lane_clks(host);
1113 	phy_power_off(host->generic_phy);
1114 	phy_exit(host->generic_phy);
1115 }
1116 
1117 /**
1118  * ufs_qcom_set_clk_40ns_cycles - Configure 40ns clk cycles
1119  *
1120  * @hba: host controller instance
1121  * @cycles_in_1us: No of cycles in 1us to be configured
1122  *
1123  * Returns error if dme get/set configuration for 40ns fails
1124  * and returns zero on success.
1125  */
1126 static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba,
1127 					u32 cycles_in_1us)
1128 {
1129 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1130 	u32 cycles_in_40ns;
1131 	u32 reg;
1132 	int err;
1133 
1134 	/*
1135 	 * UFS host controller V4.0.0 onwards needs to program
1136 	 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed
1137 	 * frequency of unipro core clk of UFS host controller.
1138 	 */
1139 	if (host->hw_ver.major < 4)
1140 		return 0;
1141 
1142 	/*
1143 	 * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not
1144 	 * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will
1145 	 * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware
1146 	 * specification expect to be 16. Hence use exact hardware spec
1147 	 * mandated value for cycles_in_40ns instead of calculating using
1148 	 * generic formulae.
1149 	 */
1150 	switch (cycles_in_1us) {
1151 	case UNIPRO_CORE_CLK_FREQ_403_MHZ:
1152 		cycles_in_40ns = 16;
1153 		break;
1154 	case UNIPRO_CORE_CLK_FREQ_300_MHZ:
1155 		cycles_in_40ns = 12;
1156 		break;
1157 	case UNIPRO_CORE_CLK_FREQ_201_5_MHZ:
1158 		cycles_in_40ns = 8;
1159 		break;
1160 	case UNIPRO_CORE_CLK_FREQ_150_MHZ:
1161 		cycles_in_40ns = 6;
1162 		break;
1163 	case UNIPRO_CORE_CLK_FREQ_100_MHZ:
1164 		cycles_in_40ns = 4;
1165 		break;
1166 	case  UNIPRO_CORE_CLK_FREQ_75_MHZ:
1167 		cycles_in_40ns = 3;
1168 		break;
1169 	case UNIPRO_CORE_CLK_FREQ_37_5_MHZ:
1170 		cycles_in_40ns = 2;
1171 		break;
1172 	default:
1173 		dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n",
1174 				cycles_in_1us);
1175 		return -EINVAL;
1176 	}
1177 
1178 	err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), &reg);
1179 	if (err)
1180 		return err;
1181 
1182 	reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK;
1183 	reg |= cycles_in_40ns;
1184 
1185 	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg);
1186 }
1187 
1188 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up)
1189 {
1190 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1191 	struct list_head *head = &hba->clk_list_head;
1192 	struct ufs_clk_info *clki;
1193 	u32 cycles_in_1us = 0;
1194 	u32 core_clk_ctrl_reg;
1195 	int err;
1196 
1197 	list_for_each_entry(clki, head, list) {
1198 		if (!IS_ERR_OR_NULL(clki->clk) &&
1199 			!strcmp(clki->name, "core_clk_unipro")) {
1200 			if (is_scale_up)
1201 				cycles_in_1us = ceil(clki->max_freq, (1000 * 1000));
1202 			else
1203 				cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000));
1204 			break;
1205 		}
1206 	}
1207 
1208 	err = ufshcd_dme_get(hba,
1209 			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
1210 			    &core_clk_ctrl_reg);
1211 	if (err)
1212 		return err;
1213 
1214 	/* Bit mask is different for UFS host controller V4.0.0 onwards */
1215 	if (host->hw_ver.major >= 4) {
1216 		if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us))
1217 			return -ERANGE;
1218 		core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4;
1219 		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us);
1220 	} else {
1221 		if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us))
1222 			return -ERANGE;
1223 		core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK;
1224 		core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us);
1225 	}
1226 
1227 	/* Clear CORE_CLK_DIV_EN */
1228 	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
1229 
1230 	err = ufshcd_dme_set(hba,
1231 			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
1232 			    core_clk_ctrl_reg);
1233 	if (err)
1234 		return err;
1235 
1236 	/* Configure unipro core clk 40ns attribute */
1237 	return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us);
1238 }
1239 
1240 static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
1241 {
1242 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1243 	struct ufs_pa_layer_attr *attr = &host->dev_req_params;
1244 	int ret;
1245 
1246 	ret = ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
1247 				  attr->hs_rate, false, true);
1248 	if (ret) {
1249 		dev_err(hba->dev, "%s ufs cfg timer failed\n", __func__);
1250 		return ret;
1251 	}
1252 	/* set unipro core clock attributes and clear clock divider */
1253 	return ufs_qcom_set_core_clk_ctrl(hba, true);
1254 }
1255 
1256 static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
1257 {
1258 	return 0;
1259 }
1260 
1261 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
1262 {
1263 	int err;
1264 	u32 core_clk_ctrl_reg;
1265 
1266 	err = ufshcd_dme_get(hba,
1267 			    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
1268 			    &core_clk_ctrl_reg);
1269 
1270 	/* make sure CORE_CLK_DIV_EN is cleared */
1271 	if (!err &&
1272 	    (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
1273 		core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
1274 		err = ufshcd_dme_set(hba,
1275 				    UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
1276 				    core_clk_ctrl_reg);
1277 	}
1278 
1279 	return err;
1280 }
1281 
1282 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
1283 {
1284 	/* set unipro core clock attributes and clear clock divider */
1285 	return ufs_qcom_set_core_clk_ctrl(hba, false);
1286 }
1287 
1288 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
1289 		bool scale_up, enum ufs_notify_change_status status)
1290 {
1291 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1292 	int err;
1293 
1294 	/* check the host controller state before sending hibern8 cmd */
1295 	if (!ufshcd_is_hba_active(hba))
1296 		return 0;
1297 
1298 	if (status == PRE_CHANGE) {
1299 		err = ufshcd_uic_hibern8_enter(hba);
1300 		if (err)
1301 			return err;
1302 		if (scale_up)
1303 			err = ufs_qcom_clk_scale_up_pre_change(hba);
1304 		else
1305 			err = ufs_qcom_clk_scale_down_pre_change(hba);
1306 
1307 		if (err) {
1308 			ufshcd_uic_hibern8_exit(hba);
1309 			return err;
1310 		}
1311 	} else {
1312 		if (scale_up)
1313 			err = ufs_qcom_clk_scale_up_post_change(hba);
1314 		else
1315 			err = ufs_qcom_clk_scale_down_post_change(hba);
1316 
1317 
1318 		if (err) {
1319 			ufshcd_uic_hibern8_exit(hba);
1320 			return err;
1321 		}
1322 
1323 		ufs_qcom_icc_update_bw(host);
1324 		ufshcd_uic_hibern8_exit(hba);
1325 	}
1326 
1327 	return 0;
1328 }
1329 
1330 static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
1331 {
1332 	ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
1333 			UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
1334 	ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
1335 }
1336 
1337 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
1338 {
1339 	/* provide a legal default configuration */
1340 	host->testbus.select_major = TSTBUS_UNIPRO;
1341 	host->testbus.select_minor = 37;
1342 }
1343 
1344 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
1345 {
1346 	if (host->testbus.select_major >= TSTBUS_MAX) {
1347 		dev_err(host->hba->dev,
1348 			"%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
1349 			__func__, host->testbus.select_major);
1350 		return false;
1351 	}
1352 
1353 	return true;
1354 }
1355 
1356 int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
1357 {
1358 	int reg;
1359 	int offset;
1360 	u32 mask = TEST_BUS_SUB_SEL_MASK;
1361 
1362 	if (!host)
1363 		return -EINVAL;
1364 
1365 	if (!ufs_qcom_testbus_cfg_is_ok(host))
1366 		return -EPERM;
1367 
1368 	switch (host->testbus.select_major) {
1369 	case TSTBUS_UAWM:
1370 		reg = UFS_TEST_BUS_CTRL_0;
1371 		offset = 24;
1372 		break;
1373 	case TSTBUS_UARM:
1374 		reg = UFS_TEST_BUS_CTRL_0;
1375 		offset = 16;
1376 		break;
1377 	case TSTBUS_TXUC:
1378 		reg = UFS_TEST_BUS_CTRL_0;
1379 		offset = 8;
1380 		break;
1381 	case TSTBUS_RXUC:
1382 		reg = UFS_TEST_BUS_CTRL_0;
1383 		offset = 0;
1384 		break;
1385 	case TSTBUS_DFC:
1386 		reg = UFS_TEST_BUS_CTRL_1;
1387 		offset = 24;
1388 		break;
1389 	case TSTBUS_TRLUT:
1390 		reg = UFS_TEST_BUS_CTRL_1;
1391 		offset = 16;
1392 		break;
1393 	case TSTBUS_TMRLUT:
1394 		reg = UFS_TEST_BUS_CTRL_1;
1395 		offset = 8;
1396 		break;
1397 	case TSTBUS_OCSC:
1398 		reg = UFS_TEST_BUS_CTRL_1;
1399 		offset = 0;
1400 		break;
1401 	case TSTBUS_WRAPPER:
1402 		reg = UFS_TEST_BUS_CTRL_2;
1403 		offset = 16;
1404 		break;
1405 	case TSTBUS_COMBINED:
1406 		reg = UFS_TEST_BUS_CTRL_2;
1407 		offset = 8;
1408 		break;
1409 	case TSTBUS_UTP_HCI:
1410 		reg = UFS_TEST_BUS_CTRL_2;
1411 		offset = 0;
1412 		break;
1413 	case TSTBUS_UNIPRO:
1414 		reg = UFS_UNIPRO_CFG;
1415 		offset = 20;
1416 		mask = 0xFFF;
1417 		break;
1418 	/*
1419 	 * No need for a default case, since
1420 	 * ufs_qcom_testbus_cfg_is_ok() checks that the configuration
1421 	 * is legal
1422 	 */
1423 	}
1424 	mask <<= offset;
1425 	ufshcd_rmwl(host->hba, TEST_BUS_SEL,
1426 		    (u32)host->testbus.select_major << 19,
1427 		    REG_UFS_CFG1);
1428 	ufshcd_rmwl(host->hba, mask,
1429 		    (u32)host->testbus.select_minor << offset,
1430 		    reg);
1431 	ufs_qcom_enable_test_bus(host);
1432 	/*
1433 	 * Make sure the test bus configuration is
1434 	 * committed before returning.
1435 	 */
1436 	mb();
1437 
1438 	return 0;
1439 }
1440 
1441 static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
1442 {
1443 	u32 reg;
1444 	struct ufs_qcom_host *host;
1445 
1446 	host = ufshcd_get_variant(hba);
1447 
1448 	ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4,
1449 			 "HCI Vendor Specific Registers ");
1450 
1451 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC);
1452 	ufshcd_dump_regs(hba, reg, 44 * 4, "UFS_UFS_DBG_RD_REG_OCSC ");
1453 
1454 	reg = ufshcd_readl(hba, REG_UFS_CFG1);
1455 	reg |= UTP_DBG_RAMS_EN;
1456 	ufshcd_writel(hba, reg, REG_UFS_CFG1);
1457 
1458 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM);
1459 	ufshcd_dump_regs(hba, reg, 32 * 4, "UFS_UFS_DBG_RD_EDTL_RAM ");
1460 
1461 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM);
1462 	ufshcd_dump_regs(hba, reg, 128 * 4, "UFS_UFS_DBG_RD_DESC_RAM ");
1463 
1464 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
1465 	ufshcd_dump_regs(hba, reg, 64 * 4, "UFS_UFS_DBG_RD_PRDT_RAM ");
1466 
1467 	/* clear bit 17 - UTP_DBG_RAMS_EN */
1468 	ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1);
1469 
1470 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
1471 	ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UAWM ");
1472 
1473 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM);
1474 	ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UARM ");
1475 
1476 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC);
1477 	ufshcd_dump_regs(hba, reg, 48 * 4, "UFS_DBG_RD_REG_TXUC ");
1478 
1479 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC);
1480 	ufshcd_dump_regs(hba, reg, 27 * 4, "UFS_DBG_RD_REG_RXUC ");
1481 
1482 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC);
1483 	ufshcd_dump_regs(hba, reg, 19 * 4, "UFS_DBG_RD_REG_DFC ");
1484 
1485 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT);
1486 	ufshcd_dump_regs(hba, reg, 34 * 4, "UFS_DBG_RD_REG_TRLUT ");
1487 
1488 	reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT);
1489 	ufshcd_dump_regs(hba, reg, 9 * 4, "UFS_DBG_RD_REG_TMRLUT ");
1490 }
1491 
1492 /**
1493  * ufs_qcom_device_reset() - toggle the (optional) device reset line
1494  * @hba: per-adapter instance
1495  *
1496  * Toggles the (optional) reset line to reset the attached device.
1497  */
1498 static int ufs_qcom_device_reset(struct ufs_hba *hba)
1499 {
1500 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1501 
1502 	/* reset gpio is optional */
1503 	if (!host->device_reset)
1504 		return -EOPNOTSUPP;
1505 
1506 	/*
1507 	 * The UFS device shall detect reset pulses of 1us, sleep for 10us to
1508 	 * be on the safe side.
1509 	 */
1510 	ufs_qcom_device_reset_ctrl(hba, true);
1511 	usleep_range(10, 15);
1512 
1513 	ufs_qcom_device_reset_ctrl(hba, false);
1514 	usleep_range(10, 15);
1515 
1516 	return 0;
1517 }
1518 
1519 #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
1520 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
1521 					struct devfreq_dev_profile *p,
1522 					struct devfreq_simple_ondemand_data *d)
1523 {
1524 	p->polling_ms = 60;
1525 	p->timer = DEVFREQ_TIMER_DELAYED;
1526 	d->upthreshold = 70;
1527 	d->downdifferential = 5;
1528 }
1529 #else
1530 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
1531 		struct devfreq_dev_profile *p,
1532 		struct devfreq_simple_ondemand_data *data)
1533 {
1534 }
1535 #endif
1536 
1537 static void ufs_qcom_reinit_notify(struct ufs_hba *hba)
1538 {
1539 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1540 
1541 	phy_power_off(host->generic_phy);
1542 }
1543 
1544 /* Resources */
1545 static const struct ufshcd_res_info ufs_res_info[RES_MAX] = {
1546 	{.name = "ufs_mem",},
1547 	{.name = "mcq",},
1548 	/* Submission Queue DAO */
1549 	{.name = "mcq_sqd",},
1550 	/* Submission Queue Interrupt Status */
1551 	{.name = "mcq_sqis",},
1552 	/* Completion Queue DAO */
1553 	{.name = "mcq_cqd",},
1554 	/* Completion Queue Interrupt Status */
1555 	{.name = "mcq_cqis",},
1556 	/* MCQ vendor specific */
1557 	{.name = "mcq_vs",},
1558 };
1559 
1560 static int ufs_qcom_mcq_config_resource(struct ufs_hba *hba)
1561 {
1562 	struct platform_device *pdev = to_platform_device(hba->dev);
1563 	struct ufshcd_res_info *res;
1564 	struct resource *res_mem, *res_mcq;
1565 	int i, ret;
1566 
1567 	memcpy(hba->res, ufs_res_info, sizeof(ufs_res_info));
1568 
1569 	for (i = 0; i < RES_MAX; i++) {
1570 		res = &hba->res[i];
1571 		res->resource = platform_get_resource_byname(pdev,
1572 							     IORESOURCE_MEM,
1573 							     res->name);
1574 		if (!res->resource) {
1575 			dev_info(hba->dev, "Resource %s not provided\n", res->name);
1576 			if (i == RES_UFS)
1577 				return -ENODEV;
1578 			continue;
1579 		} else if (i == RES_UFS) {
1580 			res_mem = res->resource;
1581 			res->base = hba->mmio_base;
1582 			continue;
1583 		}
1584 
1585 		res->base = devm_ioremap_resource(hba->dev, res->resource);
1586 		if (IS_ERR(res->base)) {
1587 			dev_err(hba->dev, "Failed to map res %s, err=%d\n",
1588 					 res->name, (int)PTR_ERR(res->base));
1589 			ret = PTR_ERR(res->base);
1590 			res->base = NULL;
1591 			return ret;
1592 		}
1593 	}
1594 
1595 	/* MCQ resource provided in DT */
1596 	res = &hba->res[RES_MCQ];
1597 	/* Bail if MCQ resource is provided */
1598 	if (res->base)
1599 		goto out;
1600 
1601 	/* Explicitly allocate MCQ resource from ufs_mem */
1602 	res_mcq = devm_kzalloc(hba->dev, sizeof(*res_mcq), GFP_KERNEL);
1603 	if (!res_mcq)
1604 		return -ENOMEM;
1605 
1606 	res_mcq->start = res_mem->start +
1607 			 MCQ_SQATTR_OFFSET(hba->mcq_capabilities);
1608 	res_mcq->end = res_mcq->start + hba->nr_hw_queues * MCQ_QCFG_SIZE - 1;
1609 	res_mcq->flags = res_mem->flags;
1610 	res_mcq->name = "mcq";
1611 
1612 	ret = insert_resource(&iomem_resource, res_mcq);
1613 	if (ret) {
1614 		dev_err(hba->dev, "Failed to insert MCQ resource, err=%d\n",
1615 			ret);
1616 		return ret;
1617 	}
1618 
1619 	res->base = devm_ioremap_resource(hba->dev, res_mcq);
1620 	if (IS_ERR(res->base)) {
1621 		dev_err(hba->dev, "MCQ registers mapping failed, err=%d\n",
1622 			(int)PTR_ERR(res->base));
1623 		ret = PTR_ERR(res->base);
1624 		goto ioremap_err;
1625 	}
1626 
1627 out:
1628 	hba->mcq_base = res->base;
1629 	return 0;
1630 ioremap_err:
1631 	res->base = NULL;
1632 	remove_resource(res_mcq);
1633 	return ret;
1634 }
1635 
1636 static int ufs_qcom_op_runtime_config(struct ufs_hba *hba)
1637 {
1638 	struct ufshcd_res_info *mem_res, *sqdao_res;
1639 	struct ufshcd_mcq_opr_info_t *opr;
1640 	int i;
1641 
1642 	mem_res = &hba->res[RES_UFS];
1643 	sqdao_res = &hba->res[RES_MCQ_SQD];
1644 
1645 	if (!mem_res->base || !sqdao_res->base)
1646 		return -EINVAL;
1647 
1648 	for (i = 0; i < OPR_MAX; i++) {
1649 		opr = &hba->mcq_opr[i];
1650 		opr->offset = sqdao_res->resource->start -
1651 			      mem_res->resource->start + 0x40 * i;
1652 		opr->stride = 0x100;
1653 		opr->base = sqdao_res->base + 0x40 * i;
1654 	}
1655 
1656 	return 0;
1657 }
1658 
1659 static int ufs_qcom_get_hba_mac(struct ufs_hba *hba)
1660 {
1661 	/* Qualcomm HC supports up to 64 */
1662 	return MAX_SUPP_MAC;
1663 }
1664 
1665 static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba,
1666 					unsigned long *ocqs)
1667 {
1668 	struct ufshcd_res_info *mcq_vs_res = &hba->res[RES_MCQ_VS];
1669 
1670 	if (!mcq_vs_res->base)
1671 		return -EINVAL;
1672 
1673 	*ocqs = readl(mcq_vs_res->base + UFS_MEM_CQIS_VS);
1674 
1675 	return 0;
1676 }
1677 
1678 static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
1679 {
1680 	struct device *dev = msi_desc_to_dev(desc);
1681 	struct ufs_hba *hba = dev_get_drvdata(dev);
1682 
1683 	ufshcd_mcq_config_esi(hba, msg);
1684 }
1685 
1686 static irqreturn_t ufs_qcom_mcq_esi_handler(int irq, void *data)
1687 {
1688 	struct msi_desc *desc = data;
1689 	struct device *dev = msi_desc_to_dev(desc);
1690 	struct ufs_hba *hba = dev_get_drvdata(dev);
1691 	u32 id = desc->msi_index;
1692 	struct ufs_hw_queue *hwq = &hba->uhq[id];
1693 
1694 	ufshcd_mcq_write_cqis(hba, 0x1, id);
1695 	ufshcd_mcq_poll_cqe_lock(hba, hwq);
1696 
1697 	return IRQ_HANDLED;
1698 }
1699 
1700 static int ufs_qcom_config_esi(struct ufs_hba *hba)
1701 {
1702 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
1703 	struct msi_desc *desc;
1704 	struct msi_desc *failed_desc = NULL;
1705 	int nr_irqs, ret;
1706 
1707 	if (host->esi_enabled)
1708 		return 0;
1709 
1710 	/*
1711 	 * 1. We only handle CQs as of now.
1712 	 * 2. Poll queues do not need ESI.
1713 	 */
1714 	nr_irqs = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL];
1715 	ret = platform_msi_domain_alloc_irqs(hba->dev, nr_irqs,
1716 					     ufs_qcom_write_msi_msg);
1717 	if (ret) {
1718 		dev_err(hba->dev, "Failed to request Platform MSI %d\n", ret);
1719 		return ret;
1720 	}
1721 
1722 	msi_lock_descs(hba->dev);
1723 	msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) {
1724 		ret = devm_request_irq(hba->dev, desc->irq,
1725 				       ufs_qcom_mcq_esi_handler,
1726 				       IRQF_SHARED, "qcom-mcq-esi", desc);
1727 		if (ret) {
1728 			dev_err(hba->dev, "%s: Fail to request IRQ for %d, err = %d\n",
1729 				__func__, desc->irq, ret);
1730 			failed_desc = desc;
1731 			break;
1732 		}
1733 	}
1734 	msi_unlock_descs(hba->dev);
1735 
1736 	if (ret) {
1737 		/* Rewind */
1738 		msi_lock_descs(hba->dev);
1739 		msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) {
1740 			if (desc == failed_desc)
1741 				break;
1742 			devm_free_irq(hba->dev, desc->irq, hba);
1743 		}
1744 		msi_unlock_descs(hba->dev);
1745 		platform_msi_domain_free_irqs(hba->dev);
1746 	} else {
1747 		if (host->hw_ver.major == 6 && host->hw_ver.minor == 0 &&
1748 		    host->hw_ver.step == 0)
1749 			ufshcd_rmwl(hba, ESI_VEC_MASK,
1750 				    FIELD_PREP(ESI_VEC_MASK, MAX_ESI_VEC - 1),
1751 				    REG_UFS_CFG3);
1752 		ufshcd_mcq_enable_esi(hba);
1753 		host->esi_enabled = true;
1754 	}
1755 
1756 	return ret;
1757 }
1758 
1759 /*
1760  * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
1761  *
1762  * The variant operations configure the necessary controller and PHY
1763  * handshake during initialization.
1764  */
1765 static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
1766 	.name                   = "qcom",
1767 	.init                   = ufs_qcom_init,
1768 	.exit                   = ufs_qcom_exit,
1769 	.get_ufs_hci_version	= ufs_qcom_get_ufs_hci_version,
1770 	.clk_scale_notify	= ufs_qcom_clk_scale_notify,
1771 	.setup_clocks           = ufs_qcom_setup_clocks,
1772 	.hce_enable_notify      = ufs_qcom_hce_enable_notify,
1773 	.link_startup_notify    = ufs_qcom_link_startup_notify,
1774 	.pwr_change_notify	= ufs_qcom_pwr_change_notify,
1775 	.apply_dev_quirks	= ufs_qcom_apply_dev_quirks,
1776 	.suspend		= ufs_qcom_suspend,
1777 	.resume			= ufs_qcom_resume,
1778 	.dbg_register_dump	= ufs_qcom_dump_dbg_regs,
1779 	.device_reset		= ufs_qcom_device_reset,
1780 	.config_scaling_param = ufs_qcom_config_scaling_param,
1781 	.program_key		= ufs_qcom_ice_program_key,
1782 	.reinit_notify		= ufs_qcom_reinit_notify,
1783 	.mcq_config_resource	= ufs_qcom_mcq_config_resource,
1784 	.get_hba_mac		= ufs_qcom_get_hba_mac,
1785 	.op_runtime_config	= ufs_qcom_op_runtime_config,
1786 	.get_outstanding_cqs	= ufs_qcom_get_outstanding_cqs,
1787 	.config_esi		= ufs_qcom_config_esi,
1788 };
1789 
1790 /**
1791  * ufs_qcom_probe - probe routine of the driver
1792  * @pdev: pointer to Platform device handle
1793  *
1794  * Return: zero for success and non-zero for failure.
1795  */
1796 static int ufs_qcom_probe(struct platform_device *pdev)
1797 {
1798 	int err;
1799 	struct device *dev = &pdev->dev;
1800 
1801 	/* Perform generic probe */
1802 	err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
1803 	if (err)
1804 		return dev_err_probe(dev, err, "ufshcd_pltfrm_init() failed\n");
1805 
1806 	return 0;
1807 }
1808 
1809 /**
1810  * ufs_qcom_remove - set driver_data of the device to NULL
1811  * @pdev: pointer to platform device handle
1812  *
1813  * Always returns 0
1814  */
1815 static void ufs_qcom_remove(struct platform_device *pdev)
1816 {
1817 	struct ufs_hba *hba =  platform_get_drvdata(pdev);
1818 
1819 	pm_runtime_get_sync(&(pdev)->dev);
1820 	ufshcd_remove(hba);
1821 	platform_msi_domain_free_irqs(hba->dev);
1822 }
1823 
1824 static const struct of_device_id ufs_qcom_of_match[] __maybe_unused = {
1825 	{ .compatible = "qcom,ufshc"},
1826 	{},
1827 };
1828 MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
1829 
1830 #ifdef CONFIG_ACPI
1831 static const struct acpi_device_id ufs_qcom_acpi_match[] = {
1832 	{ "QCOM24A5" },
1833 	{ },
1834 };
1835 MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);
1836 #endif
1837 
1838 static const struct dev_pm_ops ufs_qcom_pm_ops = {
1839 	SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
1840 	.prepare	 = ufshcd_suspend_prepare,
1841 	.complete	 = ufshcd_resume_complete,
1842 #ifdef CONFIG_PM_SLEEP
1843 	.suspend         = ufshcd_system_suspend,
1844 	.resume          = ufshcd_system_resume,
1845 	.freeze          = ufshcd_system_freeze,
1846 	.restore         = ufshcd_system_restore,
1847 	.thaw            = ufshcd_system_thaw,
1848 #endif
1849 };
1850 
1851 static struct platform_driver ufs_qcom_pltform = {
1852 	.probe	= ufs_qcom_probe,
1853 	.remove_new = ufs_qcom_remove,
1854 	.driver	= {
1855 		.name	= "ufshcd-qcom",
1856 		.pm	= &ufs_qcom_pm_ops,
1857 		.of_match_table = of_match_ptr(ufs_qcom_of_match),
1858 		.acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match),
1859 	},
1860 };
1861 module_platform_driver(ufs_qcom_pltform);
1862 
1863 MODULE_LICENSE("GPL v2");
1864