1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/acpi.h> 7 #include <linux/clk.h> 8 #include <linux/delay.h> 9 #include <linux/devfreq.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/interconnect.h> 12 #include <linux/module.h> 13 #include <linux/of.h> 14 #include <linux/phy/phy.h> 15 #include <linux/platform_device.h> 16 #include <linux/reset-controller.h> 17 #include <linux/time.h> 18 19 #include <soc/qcom/ice.h> 20 21 #include <ufs/ufshcd.h> 22 #include <ufs/ufshci.h> 23 #include <ufs/ufs_quirks.h> 24 #include <ufs/unipro.h> 25 #include "ufshcd-pltfrm.h" 26 #include "ufs-qcom.h" 27 28 #define MCQ_QCFGPTR_MASK GENMASK(7, 0) 29 #define MCQ_QCFGPTR_UNIT 0x200 30 #define MCQ_SQATTR_OFFSET(c) \ 31 ((((c) >> 16) & MCQ_QCFGPTR_MASK) * MCQ_QCFGPTR_UNIT) 32 #define MCQ_QCFG_SIZE 0x40 33 34 enum { 35 TSTBUS_UAWM, 36 TSTBUS_UARM, 37 TSTBUS_TXUC, 38 TSTBUS_RXUC, 39 TSTBUS_DFC, 40 TSTBUS_TRLUT, 41 TSTBUS_TMRLUT, 42 TSTBUS_OCSC, 43 TSTBUS_UTP_HCI, 44 TSTBUS_COMBINED, 45 TSTBUS_WRAPPER, 46 TSTBUS_UNIPRO, 47 TSTBUS_MAX, 48 }; 49 50 #define QCOM_UFS_MAX_GEAR 5 51 #define QCOM_UFS_MAX_LANE 2 52 53 enum { 54 MODE_MIN, 55 MODE_PWM, 56 MODE_HS_RA, 57 MODE_HS_RB, 58 MODE_MAX, 59 }; 60 61 static const struct __ufs_qcom_bw_table { 62 u32 mem_bw; 63 u32 cfg_bw; 64 } ufs_qcom_bw_table[MODE_MAX + 1][QCOM_UFS_MAX_GEAR + 1][QCOM_UFS_MAX_LANE + 1] = { 65 [MODE_MIN][0][0] = { 0, 0 }, /* Bandwidth values in KB/s */ 66 [MODE_PWM][UFS_PWM_G1][UFS_LANE_1] = { 922, 1000 }, 67 [MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 }, 68 [MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 }, 69 [MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 }, 70 [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 }, 71 [MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 }, 72 [MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 }, 73 [MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 }, 74 [MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 }, 75 [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 }, 76 [MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 }, 77 [MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 }, 78 [MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, 79 [MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, 80 [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, 81 [MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 }, 82 [MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 }, 83 [MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, 84 [MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, 85 [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, 86 [MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 }, 87 [MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 }, 88 [MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, 89 [MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, 90 [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, 91 [MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 }, 92 [MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 }, 93 [MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, 94 [MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, 95 [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, 96 [MODE_MAX][0][0] = { 7643136, 307200 }, 97 }; 98 99 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); 100 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up); 101 102 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) 103 { 104 return container_of(rcd, struct ufs_qcom_host, rcdev); 105 } 106 107 #ifdef CONFIG_SCSI_UFS_CRYPTO 108 109 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) 110 { 111 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 112 qcom_ice_enable(host->ice); 113 } 114 115 static int ufs_qcom_ice_init(struct ufs_qcom_host *host) 116 { 117 struct ufs_hba *hba = host->hba; 118 struct device *dev = hba->dev; 119 struct qcom_ice *ice; 120 121 ice = of_qcom_ice_get(dev); 122 if (ice == ERR_PTR(-EOPNOTSUPP)) { 123 dev_warn(dev, "Disabling inline encryption support\n"); 124 ice = NULL; 125 } 126 127 if (IS_ERR_OR_NULL(ice)) 128 return PTR_ERR_OR_ZERO(ice); 129 130 host->ice = ice; 131 hba->caps |= UFSHCD_CAP_CRYPTO; 132 133 return 0; 134 } 135 136 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) 137 { 138 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 139 return qcom_ice_resume(host->ice); 140 141 return 0; 142 } 143 144 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) 145 { 146 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 147 return qcom_ice_suspend(host->ice); 148 149 return 0; 150 } 151 152 static int ufs_qcom_ice_program_key(struct ufs_hba *hba, 153 const union ufs_crypto_cfg_entry *cfg, 154 int slot) 155 { 156 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 157 union ufs_crypto_cap_entry cap; 158 bool config_enable = 159 cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE; 160 161 /* Only AES-256-XTS has been tested so far. */ 162 cap = hba->crypto_cap_array[cfg->crypto_cap_idx]; 163 if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS || 164 cap.key_size != UFS_CRYPTO_KEY_SIZE_256) 165 return -EOPNOTSUPP; 166 167 if (config_enable) 168 return qcom_ice_program_key(host->ice, 169 QCOM_ICE_CRYPTO_ALG_AES_XTS, 170 QCOM_ICE_CRYPTO_KEY_SIZE_256, 171 cfg->crypto_key, 172 cfg->data_unit_size, slot); 173 else 174 return qcom_ice_evict_key(host->ice, slot); 175 } 176 177 #else 178 179 #define ufs_qcom_ice_program_key NULL 180 181 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) 182 { 183 } 184 185 static int ufs_qcom_ice_init(struct ufs_qcom_host *host) 186 { 187 return 0; 188 } 189 190 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) 191 { 192 return 0; 193 } 194 195 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) 196 { 197 return 0; 198 } 199 #endif 200 201 static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) 202 { 203 if (!host->is_lane_clks_enabled) 204 return; 205 206 clk_bulk_disable_unprepare(host->num_clks, host->clks); 207 208 host->is_lane_clks_enabled = false; 209 } 210 211 static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) 212 { 213 int err; 214 215 err = clk_bulk_prepare_enable(host->num_clks, host->clks); 216 if (err) 217 return err; 218 219 host->is_lane_clks_enabled = true; 220 221 return 0; 222 } 223 224 static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) 225 { 226 int err; 227 struct device *dev = host->hba->dev; 228 229 if (has_acpi_companion(dev)) 230 return 0; 231 232 err = devm_clk_bulk_get_all(dev, &host->clks); 233 if (err <= 0) 234 return err; 235 236 host->num_clks = err; 237 238 return 0; 239 } 240 241 static int ufs_qcom_check_hibern8(struct ufs_hba *hba) 242 { 243 int err; 244 u32 tx_fsm_val; 245 unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); 246 247 do { 248 err = ufshcd_dme_get(hba, 249 UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 250 UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), 251 &tx_fsm_val); 252 if (err || tx_fsm_val == TX_FSM_HIBERN8) 253 break; 254 255 /* sleep for max. 200us */ 256 usleep_range(100, 200); 257 } while (time_before(jiffies, timeout)); 258 259 /* 260 * we might have scheduled out for long during polling so 261 * check the state again. 262 */ 263 if (time_after(jiffies, timeout)) 264 err = ufshcd_dme_get(hba, 265 UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 266 UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), 267 &tx_fsm_val); 268 269 if (err) { 270 dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", 271 __func__, err); 272 } else if (tx_fsm_val != TX_FSM_HIBERN8) { 273 err = tx_fsm_val; 274 dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", 275 __func__, err); 276 } 277 278 return err; 279 } 280 281 static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) 282 { 283 ufshcd_rmwl(host->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1); 284 285 if (host->hw_ver.major >= 0x05) 286 ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); 287 288 /* make sure above configuration is applied before we return */ 289 mb(); 290 } 291 292 /* 293 * ufs_qcom_host_reset - reset host controller and PHY 294 */ 295 static int ufs_qcom_host_reset(struct ufs_hba *hba) 296 { 297 int ret; 298 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 299 bool reenable_intr; 300 301 if (!host->core_reset) 302 return 0; 303 304 reenable_intr = hba->is_irq_enabled; 305 ufshcd_disable_irq(hba); 306 307 ret = reset_control_assert(host->core_reset); 308 if (ret) { 309 dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", 310 __func__, ret); 311 return ret; 312 } 313 314 /* 315 * The hardware requirement for delay between assert/deassert 316 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to 317 * ~125us (4/32768). To be on the safe side add 200us delay. 318 */ 319 usleep_range(200, 210); 320 321 ret = reset_control_deassert(host->core_reset); 322 if (ret) { 323 dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", 324 __func__, ret); 325 return ret; 326 } 327 328 usleep_range(1000, 1100); 329 330 if (reenable_intr) 331 ufshcd_enable_irq(hba); 332 333 return 0; 334 } 335 336 static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) 337 { 338 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 339 340 if (host->hw_ver.major >= 0x4) 341 return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); 342 343 /* Default is HS-G3 */ 344 return UFS_HS_G3; 345 } 346 347 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) 348 { 349 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 350 struct ufs_host_params *host_params = &host->host_params; 351 struct phy *phy = host->generic_phy; 352 enum phy_mode mode; 353 int ret; 354 355 /* 356 * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. 357 * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, 358 * so that the subsequent power mode change shall stick to Rate-A. 359 */ 360 if (host->hw_ver.major == 0x5) { 361 if (host->phy_gear == UFS_HS_G5) 362 host_params->hs_rate = PA_HS_MODE_A; 363 else 364 host_params->hs_rate = PA_HS_MODE_B; 365 } 366 367 mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; 368 369 /* Reset UFS Host Controller and PHY */ 370 ret = ufs_qcom_host_reset(hba); 371 if (ret) 372 return ret; 373 374 /* phy initialization - calibrate the phy */ 375 ret = phy_init(phy); 376 if (ret) { 377 dev_err(hba->dev, "%s: phy init failed, ret = %d\n", 378 __func__, ret); 379 return ret; 380 } 381 382 ret = phy_set_mode_ext(phy, mode, host->phy_gear); 383 if (ret) 384 goto out_disable_phy; 385 386 /* power on phy - start serdes and phy's power and clocks */ 387 ret = phy_power_on(phy); 388 if (ret) { 389 dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", 390 __func__, ret); 391 goto out_disable_phy; 392 } 393 394 ufs_qcom_select_unipro_mode(host); 395 396 return 0; 397 398 out_disable_phy: 399 phy_exit(phy); 400 401 return ret; 402 } 403 404 /* 405 * The UTP controller has a number of internal clock gating cells (CGCs). 406 * Internal hardware sub-modules within the UTP controller control the CGCs. 407 * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved 408 * in a specific operation, UTP controller CGCs are by default disabled and 409 * this function enables them (after every UFS link startup) to save some power 410 * leakage. 411 */ 412 static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) 413 { 414 ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL, 415 REG_UFS_CFG2); 416 417 /* Ensure that HW clock gating is enabled before next operations */ 418 mb(); 419 } 420 421 static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, 422 enum ufs_notify_change_status status) 423 { 424 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 425 int err; 426 427 switch (status) { 428 case PRE_CHANGE: 429 err = ufs_qcom_power_up_sequence(hba); 430 if (err) 431 return err; 432 433 /* 434 * The PHY PLL output is the source of tx/rx lane symbol 435 * clocks, hence, enable the lane clocks only after PHY 436 * is initialized. 437 */ 438 err = ufs_qcom_enable_lane_clks(host); 439 break; 440 case POST_CHANGE: 441 /* check if UFS PHY moved from DISABLED to HIBERN8 */ 442 err = ufs_qcom_check_hibern8(hba); 443 ufs_qcom_enable_hw_clk_gating(hba); 444 ufs_qcom_ice_enable(host); 445 break; 446 default: 447 dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); 448 err = -EINVAL; 449 break; 450 } 451 return err; 452 } 453 454 /** 455 * ufs_qcom_cfg_timers - Configure ufs qcom cfg timers 456 * 457 * @hba: host controller instance 458 * @gear: Current operating gear 459 * @hs: current power mode 460 * @rate: current operating rate (A or B) 461 * @update_link_startup_timer: indicate if link_start ongoing 462 * @is_pre_scale_up: flag to check if pre scale up condition. 463 * Return: zero for success and non-zero in case of a failure. 464 */ 465 static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, 466 u32 hs, u32 rate, bool update_link_startup_timer, 467 bool is_pre_scale_up) 468 { 469 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 470 struct ufs_clk_info *clki; 471 unsigned long core_clk_rate = 0; 472 u32 core_clk_cycles_per_us; 473 474 /* 475 * UTP controller uses SYS1CLK_1US_REG register for Interrupt 476 * Aggregation logic. 477 * It is mandatory to write SYS1CLK_1US_REG register on UFS host 478 * controller V4.0.0 onwards. 479 */ 480 if (host->hw_ver.major < 4 && !ufshcd_is_intr_aggr_allowed(hba)) 481 return 0; 482 483 if (gear == 0) { 484 dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); 485 return -EINVAL; 486 } 487 488 list_for_each_entry(clki, &hba->clk_list_head, list) { 489 if (!strcmp(clki->name, "core_clk")) { 490 if (is_pre_scale_up) 491 core_clk_rate = clki->max_freq; 492 else 493 core_clk_rate = clk_get_rate(clki->clk); 494 break; 495 } 496 497 } 498 499 /* If frequency is smaller than 1MHz, set to 1MHz */ 500 if (core_clk_rate < DEFAULT_CLK_RATE_HZ) 501 core_clk_rate = DEFAULT_CLK_RATE_HZ; 502 503 core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; 504 if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { 505 ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); 506 /* 507 * make sure above write gets applied before we return from 508 * this function. 509 */ 510 mb(); 511 } 512 513 return 0; 514 } 515 516 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, 517 enum ufs_notify_change_status status) 518 { 519 int err = 0; 520 521 switch (status) { 522 case PRE_CHANGE: 523 if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, 524 0, true, false)) { 525 dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", 526 __func__); 527 return -EINVAL; 528 } 529 530 err = ufs_qcom_set_core_clk_ctrl(hba, true); 531 if (err) 532 dev_err(hba->dev, "cfg core clk ctrl failed\n"); 533 /* 534 * Some UFS devices (and may be host) have issues if LCC is 535 * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 536 * before link startup which will make sure that both host 537 * and device TX LCC are disabled once link startup is 538 * completed. 539 */ 540 if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) 541 err = ufshcd_disable_host_tx_lcc(hba); 542 543 break; 544 default: 545 break; 546 } 547 548 return err; 549 } 550 551 static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted) 552 { 553 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 554 555 /* reset gpio is optional */ 556 if (!host->device_reset) 557 return; 558 559 gpiod_set_value_cansleep(host->device_reset, asserted); 560 } 561 562 static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, 563 enum ufs_notify_change_status status) 564 { 565 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 566 struct phy *phy = host->generic_phy; 567 568 if (status == PRE_CHANGE) 569 return 0; 570 571 if (ufs_qcom_is_link_off(hba)) { 572 /* 573 * Disable the tx/rx lane symbol clocks before PHY is 574 * powered down as the PLL source should be disabled 575 * after downstream clocks are disabled. 576 */ 577 ufs_qcom_disable_lane_clks(host); 578 phy_power_off(phy); 579 580 /* reset the connected UFS device during power down */ 581 ufs_qcom_device_reset_ctrl(hba, true); 582 583 } else if (!ufs_qcom_is_link_active(hba)) { 584 ufs_qcom_disable_lane_clks(host); 585 } 586 587 return ufs_qcom_ice_suspend(host); 588 } 589 590 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) 591 { 592 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 593 struct phy *phy = host->generic_phy; 594 int err; 595 596 if (ufs_qcom_is_link_off(hba)) { 597 err = phy_power_on(phy); 598 if (err) { 599 dev_err(hba->dev, "%s: failed PHY power on: %d\n", 600 __func__, err); 601 return err; 602 } 603 604 err = ufs_qcom_enable_lane_clks(host); 605 if (err) 606 return err; 607 608 } else if (!ufs_qcom_is_link_active(hba)) { 609 err = ufs_qcom_enable_lane_clks(host); 610 if (err) 611 return err; 612 } 613 614 return ufs_qcom_ice_resume(host); 615 } 616 617 static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) 618 { 619 if (host->dev_ref_clk_ctrl_mmio && 620 (enable ^ host->is_dev_ref_clk_enabled)) { 621 u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); 622 623 if (enable) 624 temp |= host->dev_ref_clk_en_mask; 625 else 626 temp &= ~host->dev_ref_clk_en_mask; 627 628 /* 629 * If we are here to disable this clock it might be immediately 630 * after entering into hibern8 in which case we need to make 631 * sure that device ref_clk is active for specific time after 632 * hibern8 enter. 633 */ 634 if (!enable) { 635 unsigned long gating_wait; 636 637 gating_wait = host->hba->dev_info.clk_gating_wait_us; 638 if (!gating_wait) { 639 udelay(1); 640 } else { 641 /* 642 * bRefClkGatingWaitTime defines the minimum 643 * time for which the reference clock is 644 * required by device during transition from 645 * HS-MODE to LS-MODE or HIBERN8 state. Give it 646 * more delay to be on the safe side. 647 */ 648 gating_wait += 10; 649 usleep_range(gating_wait, gating_wait + 10); 650 } 651 } 652 653 writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); 654 655 /* 656 * Make sure the write to ref_clk reaches the destination and 657 * not stored in a Write Buffer (WB). 658 */ 659 readl(host->dev_ref_clk_ctrl_mmio); 660 661 /* 662 * If we call hibern8 exit after this, we need to make sure that 663 * device ref_clk is stable for at least 1us before the hibern8 664 * exit command. 665 */ 666 if (enable) 667 udelay(1); 668 669 host->is_dev_ref_clk_enabled = enable; 670 } 671 } 672 673 static int ufs_qcom_icc_set_bw(struct ufs_qcom_host *host, u32 mem_bw, u32 cfg_bw) 674 { 675 struct device *dev = host->hba->dev; 676 int ret; 677 678 ret = icc_set_bw(host->icc_ddr, 0, mem_bw); 679 if (ret < 0) { 680 dev_err(dev, "failed to set bandwidth request: %d\n", ret); 681 return ret; 682 } 683 684 ret = icc_set_bw(host->icc_cpu, 0, cfg_bw); 685 if (ret < 0) { 686 dev_err(dev, "failed to set bandwidth request: %d\n", ret); 687 return ret; 688 } 689 690 return 0; 691 } 692 693 static struct __ufs_qcom_bw_table ufs_qcom_get_bw_table(struct ufs_qcom_host *host) 694 { 695 struct ufs_pa_layer_attr *p = &host->dev_req_params; 696 int gear = max_t(u32, p->gear_rx, p->gear_tx); 697 int lane = max_t(u32, p->lane_rx, p->lane_tx); 698 699 if (ufshcd_is_hs_mode(p)) { 700 if (p->hs_rate == PA_HS_MODE_B) 701 return ufs_qcom_bw_table[MODE_HS_RB][gear][lane]; 702 else 703 return ufs_qcom_bw_table[MODE_HS_RA][gear][lane]; 704 } else { 705 return ufs_qcom_bw_table[MODE_PWM][gear][lane]; 706 } 707 } 708 709 static int ufs_qcom_icc_update_bw(struct ufs_qcom_host *host) 710 { 711 struct __ufs_qcom_bw_table bw_table; 712 713 bw_table = ufs_qcom_get_bw_table(host); 714 715 return ufs_qcom_icc_set_bw(host, bw_table.mem_bw, bw_table.cfg_bw); 716 } 717 718 static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, 719 enum ufs_notify_change_status status, 720 struct ufs_pa_layer_attr *dev_max_params, 721 struct ufs_pa_layer_attr *dev_req_params) 722 { 723 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 724 struct ufs_host_params *host_params = &host->host_params; 725 int ret = 0; 726 727 if (!dev_req_params) { 728 pr_err("%s: incoming dev_req_params is NULL\n", __func__); 729 return -EINVAL; 730 } 731 732 switch (status) { 733 case PRE_CHANGE: 734 ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params); 735 if (ret) { 736 dev_err(hba->dev, "%s: failed to determine capabilities\n", 737 __func__); 738 return ret; 739 } 740 741 /* 742 * During UFS driver probe, always update the PHY gear to match the negotiated 743 * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, 744 * the second init can program the optimal PHY settings. This allows one to start 745 * the first init with either the minimum or the maximum support gear. 746 */ 747 if (hba->ufshcd_state == UFSHCD_STATE_RESET) { 748 /* 749 * Skip REINIT if the negotiated gear matches with the 750 * initial phy_gear. Otherwise, update the phy_gear to 751 * program the optimal gear setting during REINIT. 752 */ 753 if (host->phy_gear == dev_req_params->gear_tx) 754 hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 755 else 756 host->phy_gear = dev_req_params->gear_tx; 757 } 758 759 /* enable the device ref clock before changing to HS mode */ 760 if (!ufshcd_is_hs_mode(&hba->pwr_info) && 761 ufshcd_is_hs_mode(dev_req_params)) 762 ufs_qcom_dev_ref_clk_ctrl(host, true); 763 764 if (host->hw_ver.major >= 0x4) { 765 ufshcd_dme_configure_adapt(hba, 766 dev_req_params->gear_tx, 767 PA_INITIAL_ADAPT); 768 } 769 break; 770 case POST_CHANGE: 771 if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, 772 dev_req_params->pwr_rx, 773 dev_req_params->hs_rate, false, false)) { 774 dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", 775 __func__); 776 /* 777 * we return error code at the end of the routine, 778 * but continue to configure UFS_PHY_TX_LANE_ENABLE 779 * and bus voting as usual 780 */ 781 ret = -EINVAL; 782 } 783 784 /* cache the power mode parameters to use internally */ 785 memcpy(&host->dev_req_params, 786 dev_req_params, sizeof(*dev_req_params)); 787 788 ufs_qcom_icc_update_bw(host); 789 790 /* disable the device ref clock if entered PWM mode */ 791 if (ufshcd_is_hs_mode(&hba->pwr_info) && 792 !ufshcd_is_hs_mode(dev_req_params)) 793 ufs_qcom_dev_ref_clk_ctrl(host, false); 794 break; 795 default: 796 ret = -EINVAL; 797 break; 798 } 799 800 return ret; 801 } 802 803 static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) 804 { 805 int err; 806 u32 pa_vs_config_reg1; 807 808 err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), 809 &pa_vs_config_reg1); 810 if (err) 811 return err; 812 813 /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ 814 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), 815 (pa_vs_config_reg1 | (1 << 12))); 816 } 817 818 static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) 819 { 820 int err = 0; 821 822 if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) 823 err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); 824 825 if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC) 826 hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE; 827 828 return err; 829 } 830 831 static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) 832 { 833 return ufshci_version(2, 0); 834 } 835 836 /** 837 * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks 838 * @hba: host controller instance 839 * 840 * QCOM UFS host controller might have some non standard behaviours (quirks) 841 * than what is specified by UFSHCI specification. Advertise all such 842 * quirks to standard UFS host controller driver so standard takes them into 843 * account. 844 */ 845 static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) 846 { 847 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 848 849 if (host->hw_ver.major == 0x2) 850 hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; 851 852 if (host->hw_ver.major > 0x3) 853 hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 854 } 855 856 static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) 857 { 858 struct ufs_host_params *host_params = &host->host_params; 859 u32 val, dev_major; 860 861 /* 862 * Default to powering up the PHY to the max gear possible, which is 863 * backwards compatible with lower gears but not optimal from 864 * a power usage point of view. After device negotiation, if the 865 * gear is lower a reinit will be performed to program the PHY 866 * to the ideal gear for this combo of controller and device. 867 */ 868 host->phy_gear = host_params->hs_tx_gear; 869 870 if (host->hw_ver.major < 0x4) { 871 /* 872 * These controllers only have one PHY init sequence, 873 * let's power up the PHY using that (the minimum supported 874 * gear, UFS_HS_G2). 875 */ 876 host->phy_gear = UFS_HS_G2; 877 } else if (host->hw_ver.major >= 0x5) { 878 val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); 879 dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val); 880 881 /* 882 * Since the UFS device version is populated, let's remove the 883 * REINIT quirk as the negotiated gear won't change during boot. 884 * So there is no need to do reinit. 885 */ 886 if (dev_major != 0x0) 887 host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 888 889 /* 890 * For UFS 3.1 device and older, power up the PHY using HS-G4 891 * PHY gear to save power. 892 */ 893 if (dev_major > 0x0 && dev_major < 0x4) 894 host->phy_gear = UFS_HS_G4; 895 } 896 } 897 898 static void ufs_qcom_set_host_params(struct ufs_hba *hba) 899 { 900 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 901 struct ufs_host_params *host_params = &host->host_params; 902 903 ufshcd_init_host_params(host_params); 904 905 /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ 906 host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba); 907 } 908 909 static void ufs_qcom_set_caps(struct ufs_hba *hba) 910 { 911 hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; 912 hba->caps |= UFSHCD_CAP_CLK_SCALING | UFSHCD_CAP_WB_WITH_CLK_SCALING; 913 hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; 914 hba->caps |= UFSHCD_CAP_WB_EN; 915 hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE; 916 hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND; 917 } 918 919 /** 920 * ufs_qcom_setup_clocks - enables/disable clocks 921 * @hba: host controller instance 922 * @on: If true, enable clocks else disable them. 923 * @status: PRE_CHANGE or POST_CHANGE notify 924 * 925 * Return: 0 on success, non-zero on failure. 926 */ 927 static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, 928 enum ufs_notify_change_status status) 929 { 930 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 931 932 /* 933 * In case ufs_qcom_init() is not yet done, simply ignore. 934 * This ufs_qcom_setup_clocks() shall be called from 935 * ufs_qcom_init() after init is done. 936 */ 937 if (!host) 938 return 0; 939 940 switch (status) { 941 case PRE_CHANGE: 942 if (on) { 943 ufs_qcom_icc_update_bw(host); 944 } else { 945 if (!ufs_qcom_is_link_active(hba)) { 946 /* disable device ref_clk */ 947 ufs_qcom_dev_ref_clk_ctrl(host, false); 948 } 949 } 950 break; 951 case POST_CHANGE: 952 if (on) { 953 /* enable the device ref clock for HS mode*/ 954 if (ufshcd_is_hs_mode(&hba->pwr_info)) 955 ufs_qcom_dev_ref_clk_ctrl(host, true); 956 } else { 957 ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MIN][0][0].mem_bw, 958 ufs_qcom_bw_table[MODE_MIN][0][0].cfg_bw); 959 } 960 break; 961 } 962 963 return 0; 964 } 965 966 static int 967 ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) 968 { 969 struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); 970 971 ufs_qcom_assert_reset(host->hba); 972 /* provide 1ms delay to let the reset pulse propagate. */ 973 usleep_range(1000, 1100); 974 return 0; 975 } 976 977 static int 978 ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) 979 { 980 struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); 981 982 ufs_qcom_deassert_reset(host->hba); 983 984 /* 985 * after reset deassertion, phy will need all ref clocks, 986 * voltage, current to settle down before starting serdes. 987 */ 988 usleep_range(1000, 1100); 989 return 0; 990 } 991 992 static const struct reset_control_ops ufs_qcom_reset_ops = { 993 .assert = ufs_qcom_reset_assert, 994 .deassert = ufs_qcom_reset_deassert, 995 }; 996 997 static int ufs_qcom_icc_init(struct ufs_qcom_host *host) 998 { 999 struct device *dev = host->hba->dev; 1000 int ret; 1001 1002 host->icc_ddr = devm_of_icc_get(dev, "ufs-ddr"); 1003 if (IS_ERR(host->icc_ddr)) 1004 return dev_err_probe(dev, PTR_ERR(host->icc_ddr), 1005 "failed to acquire interconnect path\n"); 1006 1007 host->icc_cpu = devm_of_icc_get(dev, "cpu-ufs"); 1008 if (IS_ERR(host->icc_cpu)) 1009 return dev_err_probe(dev, PTR_ERR(host->icc_cpu), 1010 "failed to acquire interconnect path\n"); 1011 1012 /* 1013 * Set Maximum bandwidth vote before initializing the UFS controller and 1014 * device. Ideally, a minimal interconnect vote would suffice for the 1015 * initialization, but a max vote would allow faster initialization. 1016 */ 1017 ret = ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MAX][0][0].mem_bw, 1018 ufs_qcom_bw_table[MODE_MAX][0][0].cfg_bw); 1019 if (ret < 0) 1020 return dev_err_probe(dev, ret, "failed to set bandwidth request\n"); 1021 1022 return 0; 1023 } 1024 1025 /** 1026 * ufs_qcom_init - bind phy with controller 1027 * @hba: host controller instance 1028 * 1029 * Binds PHY with controller and powers up PHY enabling clocks 1030 * and regulators. 1031 * 1032 * Return: -EPROBE_DEFER if binding fails, returns negative error 1033 * on phy power up failure and returns zero on success. 1034 */ 1035 static int ufs_qcom_init(struct ufs_hba *hba) 1036 { 1037 int err; 1038 struct device *dev = hba->dev; 1039 struct ufs_qcom_host *host; 1040 struct ufs_clk_info *clki; 1041 1042 host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); 1043 if (!host) 1044 return -ENOMEM; 1045 1046 /* Make a two way bind between the qcom host and the hba */ 1047 host->hba = hba; 1048 ufshcd_set_variant(hba, host); 1049 1050 /* Setup the optional reset control of HCI */ 1051 host->core_reset = devm_reset_control_get_optional(hba->dev, "rst"); 1052 if (IS_ERR(host->core_reset)) { 1053 err = dev_err_probe(dev, PTR_ERR(host->core_reset), 1054 "Failed to get reset control\n"); 1055 goto out_variant_clear; 1056 } 1057 1058 /* Fire up the reset controller. Failure here is non-fatal. */ 1059 host->rcdev.of_node = dev->of_node; 1060 host->rcdev.ops = &ufs_qcom_reset_ops; 1061 host->rcdev.owner = dev->driver->owner; 1062 host->rcdev.nr_resets = 1; 1063 err = devm_reset_controller_register(dev, &host->rcdev); 1064 if (err) 1065 dev_warn(dev, "Failed to register reset controller\n"); 1066 1067 if (!has_acpi_companion(dev)) { 1068 host->generic_phy = devm_phy_get(dev, "ufsphy"); 1069 if (IS_ERR(host->generic_phy)) { 1070 err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n"); 1071 goto out_variant_clear; 1072 } 1073 } 1074 1075 err = ufs_qcom_icc_init(host); 1076 if (err) 1077 goto out_variant_clear; 1078 1079 host->device_reset = devm_gpiod_get_optional(dev, "reset", 1080 GPIOD_OUT_HIGH); 1081 if (IS_ERR(host->device_reset)) { 1082 err = dev_err_probe(dev, PTR_ERR(host->device_reset), 1083 "Failed to acquire device reset gpio\n"); 1084 goto out_variant_clear; 1085 } 1086 1087 ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, 1088 &host->hw_ver.minor, &host->hw_ver.step); 1089 1090 host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; 1091 host->dev_ref_clk_en_mask = BIT(26); 1092 1093 list_for_each_entry(clki, &hba->clk_list_head, list) { 1094 if (!strcmp(clki->name, "core_clk_unipro")) 1095 clki->keep_link_active = true; 1096 } 1097 1098 err = ufs_qcom_init_lane_clks(host); 1099 if (err) 1100 goto out_variant_clear; 1101 1102 ufs_qcom_set_caps(hba); 1103 ufs_qcom_advertise_quirks(hba); 1104 ufs_qcom_set_host_params(hba); 1105 ufs_qcom_set_phy_gear(host); 1106 1107 err = ufs_qcom_ice_init(host); 1108 if (err) 1109 goto out_variant_clear; 1110 1111 ufs_qcom_setup_clocks(hba, true, POST_CHANGE); 1112 1113 ufs_qcom_get_default_testbus_cfg(host); 1114 err = ufs_qcom_testbus_config(host); 1115 if (err) 1116 /* Failure is non-fatal */ 1117 dev_warn(dev, "%s: failed to configure the testbus %d\n", 1118 __func__, err); 1119 1120 return 0; 1121 1122 out_variant_clear: 1123 ufshcd_set_variant(hba, NULL); 1124 1125 return err; 1126 } 1127 1128 static void ufs_qcom_exit(struct ufs_hba *hba) 1129 { 1130 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1131 1132 ufs_qcom_disable_lane_clks(host); 1133 phy_power_off(host->generic_phy); 1134 phy_exit(host->generic_phy); 1135 } 1136 1137 /** 1138 * ufs_qcom_set_clk_40ns_cycles - Configure 40ns clk cycles 1139 * 1140 * @hba: host controller instance 1141 * @cycles_in_1us: No of cycles in 1us to be configured 1142 * 1143 * Returns error if dme get/set configuration for 40ns fails 1144 * and returns zero on success. 1145 */ 1146 static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba, 1147 u32 cycles_in_1us) 1148 { 1149 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1150 u32 cycles_in_40ns; 1151 u32 reg; 1152 int err; 1153 1154 /* 1155 * UFS host controller V4.0.0 onwards needs to program 1156 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed 1157 * frequency of unipro core clk of UFS host controller. 1158 */ 1159 if (host->hw_ver.major < 4) 1160 return 0; 1161 1162 /* 1163 * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not 1164 * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will 1165 * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware 1166 * specification expect to be 16. Hence use exact hardware spec 1167 * mandated value for cycles_in_40ns instead of calculating using 1168 * generic formulae. 1169 */ 1170 switch (cycles_in_1us) { 1171 case UNIPRO_CORE_CLK_FREQ_403_MHZ: 1172 cycles_in_40ns = 16; 1173 break; 1174 case UNIPRO_CORE_CLK_FREQ_300_MHZ: 1175 cycles_in_40ns = 12; 1176 break; 1177 case UNIPRO_CORE_CLK_FREQ_201_5_MHZ: 1178 cycles_in_40ns = 8; 1179 break; 1180 case UNIPRO_CORE_CLK_FREQ_150_MHZ: 1181 cycles_in_40ns = 6; 1182 break; 1183 case UNIPRO_CORE_CLK_FREQ_100_MHZ: 1184 cycles_in_40ns = 4; 1185 break; 1186 case UNIPRO_CORE_CLK_FREQ_75_MHZ: 1187 cycles_in_40ns = 3; 1188 break; 1189 case UNIPRO_CORE_CLK_FREQ_37_5_MHZ: 1190 cycles_in_40ns = 2; 1191 break; 1192 default: 1193 dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n", 1194 cycles_in_1us); 1195 return -EINVAL; 1196 } 1197 1198 err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), ®); 1199 if (err) 1200 return err; 1201 1202 reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK; 1203 reg |= cycles_in_40ns; 1204 1205 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg); 1206 } 1207 1208 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up) 1209 { 1210 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1211 struct list_head *head = &hba->clk_list_head; 1212 struct ufs_clk_info *clki; 1213 u32 cycles_in_1us = 0; 1214 u32 core_clk_ctrl_reg; 1215 int err; 1216 1217 list_for_each_entry(clki, head, list) { 1218 if (!IS_ERR_OR_NULL(clki->clk) && 1219 !strcmp(clki->name, "core_clk_unipro")) { 1220 if (!clki->max_freq) 1221 cycles_in_1us = 150; /* default for backwards compatibility */ 1222 else if (is_scale_up) 1223 cycles_in_1us = ceil(clki->max_freq, (1000 * 1000)); 1224 else 1225 cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000)); 1226 break; 1227 } 1228 } 1229 1230 err = ufshcd_dme_get(hba, 1231 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1232 &core_clk_ctrl_reg); 1233 if (err) 1234 return err; 1235 1236 /* Bit mask is different for UFS host controller V4.0.0 onwards */ 1237 if (host->hw_ver.major >= 4) { 1238 if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us)) 1239 return -ERANGE; 1240 core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4; 1241 core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us); 1242 } else { 1243 if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us)) 1244 return -ERANGE; 1245 core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK; 1246 core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us); 1247 } 1248 1249 /* Clear CORE_CLK_DIV_EN */ 1250 core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; 1251 1252 err = ufshcd_dme_set(hba, 1253 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1254 core_clk_ctrl_reg); 1255 if (err) 1256 return err; 1257 1258 /* Configure unipro core clk 40ns attribute */ 1259 return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us); 1260 } 1261 1262 static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) 1263 { 1264 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1265 struct ufs_pa_layer_attr *attr = &host->dev_req_params; 1266 int ret; 1267 1268 ret = ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx, 1269 attr->hs_rate, false, true); 1270 if (ret) { 1271 dev_err(hba->dev, "%s ufs cfg timer failed\n", __func__); 1272 return ret; 1273 } 1274 /* set unipro core clock attributes and clear clock divider */ 1275 return ufs_qcom_set_core_clk_ctrl(hba, true); 1276 } 1277 1278 static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) 1279 { 1280 return 0; 1281 } 1282 1283 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) 1284 { 1285 int err; 1286 u32 core_clk_ctrl_reg; 1287 1288 err = ufshcd_dme_get(hba, 1289 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1290 &core_clk_ctrl_reg); 1291 1292 /* make sure CORE_CLK_DIV_EN is cleared */ 1293 if (!err && 1294 (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { 1295 core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; 1296 err = ufshcd_dme_set(hba, 1297 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1298 core_clk_ctrl_reg); 1299 } 1300 1301 return err; 1302 } 1303 1304 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) 1305 { 1306 /* set unipro core clock attributes and clear clock divider */ 1307 return ufs_qcom_set_core_clk_ctrl(hba, false); 1308 } 1309 1310 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, 1311 bool scale_up, enum ufs_notify_change_status status) 1312 { 1313 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1314 int err; 1315 1316 /* check the host controller state before sending hibern8 cmd */ 1317 if (!ufshcd_is_hba_active(hba)) 1318 return 0; 1319 1320 if (status == PRE_CHANGE) { 1321 err = ufshcd_uic_hibern8_enter(hba); 1322 if (err) 1323 return err; 1324 if (scale_up) 1325 err = ufs_qcom_clk_scale_up_pre_change(hba); 1326 else 1327 err = ufs_qcom_clk_scale_down_pre_change(hba); 1328 1329 if (err) { 1330 ufshcd_uic_hibern8_exit(hba); 1331 return err; 1332 } 1333 } else { 1334 if (scale_up) 1335 err = ufs_qcom_clk_scale_up_post_change(hba); 1336 else 1337 err = ufs_qcom_clk_scale_down_post_change(hba); 1338 1339 1340 if (err) { 1341 ufshcd_uic_hibern8_exit(hba); 1342 return err; 1343 } 1344 1345 ufs_qcom_icc_update_bw(host); 1346 ufshcd_uic_hibern8_exit(hba); 1347 } 1348 1349 return 0; 1350 } 1351 1352 static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) 1353 { 1354 ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 1355 UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); 1356 ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); 1357 } 1358 1359 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) 1360 { 1361 /* provide a legal default configuration */ 1362 host->testbus.select_major = TSTBUS_UNIPRO; 1363 host->testbus.select_minor = 37; 1364 } 1365 1366 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) 1367 { 1368 if (host->testbus.select_major >= TSTBUS_MAX) { 1369 dev_err(host->hba->dev, 1370 "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", 1371 __func__, host->testbus.select_major); 1372 return false; 1373 } 1374 1375 return true; 1376 } 1377 1378 int ufs_qcom_testbus_config(struct ufs_qcom_host *host) 1379 { 1380 int reg; 1381 int offset; 1382 u32 mask = TEST_BUS_SUB_SEL_MASK; 1383 1384 if (!host) 1385 return -EINVAL; 1386 1387 if (!ufs_qcom_testbus_cfg_is_ok(host)) 1388 return -EPERM; 1389 1390 switch (host->testbus.select_major) { 1391 case TSTBUS_UAWM: 1392 reg = UFS_TEST_BUS_CTRL_0; 1393 offset = 24; 1394 break; 1395 case TSTBUS_UARM: 1396 reg = UFS_TEST_BUS_CTRL_0; 1397 offset = 16; 1398 break; 1399 case TSTBUS_TXUC: 1400 reg = UFS_TEST_BUS_CTRL_0; 1401 offset = 8; 1402 break; 1403 case TSTBUS_RXUC: 1404 reg = UFS_TEST_BUS_CTRL_0; 1405 offset = 0; 1406 break; 1407 case TSTBUS_DFC: 1408 reg = UFS_TEST_BUS_CTRL_1; 1409 offset = 24; 1410 break; 1411 case TSTBUS_TRLUT: 1412 reg = UFS_TEST_BUS_CTRL_1; 1413 offset = 16; 1414 break; 1415 case TSTBUS_TMRLUT: 1416 reg = UFS_TEST_BUS_CTRL_1; 1417 offset = 8; 1418 break; 1419 case TSTBUS_OCSC: 1420 reg = UFS_TEST_BUS_CTRL_1; 1421 offset = 0; 1422 break; 1423 case TSTBUS_WRAPPER: 1424 reg = UFS_TEST_BUS_CTRL_2; 1425 offset = 16; 1426 break; 1427 case TSTBUS_COMBINED: 1428 reg = UFS_TEST_BUS_CTRL_2; 1429 offset = 8; 1430 break; 1431 case TSTBUS_UTP_HCI: 1432 reg = UFS_TEST_BUS_CTRL_2; 1433 offset = 0; 1434 break; 1435 case TSTBUS_UNIPRO: 1436 reg = UFS_UNIPRO_CFG; 1437 offset = 20; 1438 mask = 0xFFF; 1439 break; 1440 /* 1441 * No need for a default case, since 1442 * ufs_qcom_testbus_cfg_is_ok() checks that the configuration 1443 * is legal 1444 */ 1445 } 1446 mask <<= offset; 1447 ufshcd_rmwl(host->hba, TEST_BUS_SEL, 1448 (u32)host->testbus.select_major << 19, 1449 REG_UFS_CFG1); 1450 ufshcd_rmwl(host->hba, mask, 1451 (u32)host->testbus.select_minor << offset, 1452 reg); 1453 ufs_qcom_enable_test_bus(host); 1454 /* 1455 * Make sure the test bus configuration is 1456 * committed before returning. 1457 */ 1458 mb(); 1459 1460 return 0; 1461 } 1462 1463 static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) 1464 { 1465 u32 reg; 1466 struct ufs_qcom_host *host; 1467 1468 host = ufshcd_get_variant(hba); 1469 1470 ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, 1471 "HCI Vendor Specific Registers "); 1472 1473 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); 1474 ufshcd_dump_regs(hba, reg, 44 * 4, "UFS_UFS_DBG_RD_REG_OCSC "); 1475 1476 reg = ufshcd_readl(hba, REG_UFS_CFG1); 1477 reg |= UTP_DBG_RAMS_EN; 1478 ufshcd_writel(hba, reg, REG_UFS_CFG1); 1479 1480 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); 1481 ufshcd_dump_regs(hba, reg, 32 * 4, "UFS_UFS_DBG_RD_EDTL_RAM "); 1482 1483 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); 1484 ufshcd_dump_regs(hba, reg, 128 * 4, "UFS_UFS_DBG_RD_DESC_RAM "); 1485 1486 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); 1487 ufshcd_dump_regs(hba, reg, 64 * 4, "UFS_UFS_DBG_RD_PRDT_RAM "); 1488 1489 /* clear bit 17 - UTP_DBG_RAMS_EN */ 1490 ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); 1491 1492 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); 1493 ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UAWM "); 1494 1495 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); 1496 ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UARM "); 1497 1498 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); 1499 ufshcd_dump_regs(hba, reg, 48 * 4, "UFS_DBG_RD_REG_TXUC "); 1500 1501 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); 1502 ufshcd_dump_regs(hba, reg, 27 * 4, "UFS_DBG_RD_REG_RXUC "); 1503 1504 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); 1505 ufshcd_dump_regs(hba, reg, 19 * 4, "UFS_DBG_RD_REG_DFC "); 1506 1507 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); 1508 ufshcd_dump_regs(hba, reg, 34 * 4, "UFS_DBG_RD_REG_TRLUT "); 1509 1510 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); 1511 ufshcd_dump_regs(hba, reg, 9 * 4, "UFS_DBG_RD_REG_TMRLUT "); 1512 } 1513 1514 /** 1515 * ufs_qcom_device_reset() - toggle the (optional) device reset line 1516 * @hba: per-adapter instance 1517 * 1518 * Toggles the (optional) reset line to reset the attached device. 1519 */ 1520 static int ufs_qcom_device_reset(struct ufs_hba *hba) 1521 { 1522 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1523 1524 /* reset gpio is optional */ 1525 if (!host->device_reset) 1526 return -EOPNOTSUPP; 1527 1528 /* 1529 * The UFS device shall detect reset pulses of 1us, sleep for 10us to 1530 * be on the safe side. 1531 */ 1532 ufs_qcom_device_reset_ctrl(hba, true); 1533 usleep_range(10, 15); 1534 1535 ufs_qcom_device_reset_ctrl(hba, false); 1536 usleep_range(10, 15); 1537 1538 return 0; 1539 } 1540 1541 #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) 1542 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, 1543 struct devfreq_dev_profile *p, 1544 struct devfreq_simple_ondemand_data *d) 1545 { 1546 p->polling_ms = 60; 1547 p->timer = DEVFREQ_TIMER_DELAYED; 1548 d->upthreshold = 70; 1549 d->downdifferential = 5; 1550 } 1551 #else 1552 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, 1553 struct devfreq_dev_profile *p, 1554 struct devfreq_simple_ondemand_data *data) 1555 { 1556 } 1557 #endif 1558 1559 static void ufs_qcom_reinit_notify(struct ufs_hba *hba) 1560 { 1561 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1562 1563 phy_power_off(host->generic_phy); 1564 } 1565 1566 /* Resources */ 1567 static const struct ufshcd_res_info ufs_res_info[RES_MAX] = { 1568 {.name = "ufs_mem",}, 1569 {.name = "mcq",}, 1570 /* Submission Queue DAO */ 1571 {.name = "mcq_sqd",}, 1572 /* Submission Queue Interrupt Status */ 1573 {.name = "mcq_sqis",}, 1574 /* Completion Queue DAO */ 1575 {.name = "mcq_cqd",}, 1576 /* Completion Queue Interrupt Status */ 1577 {.name = "mcq_cqis",}, 1578 /* MCQ vendor specific */ 1579 {.name = "mcq_vs",}, 1580 }; 1581 1582 static int ufs_qcom_mcq_config_resource(struct ufs_hba *hba) 1583 { 1584 struct platform_device *pdev = to_platform_device(hba->dev); 1585 struct ufshcd_res_info *res; 1586 struct resource *res_mem, *res_mcq; 1587 int i, ret; 1588 1589 memcpy(hba->res, ufs_res_info, sizeof(ufs_res_info)); 1590 1591 for (i = 0; i < RES_MAX; i++) { 1592 res = &hba->res[i]; 1593 res->resource = platform_get_resource_byname(pdev, 1594 IORESOURCE_MEM, 1595 res->name); 1596 if (!res->resource) { 1597 dev_info(hba->dev, "Resource %s not provided\n", res->name); 1598 if (i == RES_UFS) 1599 return -ENODEV; 1600 continue; 1601 } else if (i == RES_UFS) { 1602 res_mem = res->resource; 1603 res->base = hba->mmio_base; 1604 continue; 1605 } 1606 1607 res->base = devm_ioremap_resource(hba->dev, res->resource); 1608 if (IS_ERR(res->base)) { 1609 dev_err(hba->dev, "Failed to map res %s, err=%d\n", 1610 res->name, (int)PTR_ERR(res->base)); 1611 ret = PTR_ERR(res->base); 1612 res->base = NULL; 1613 return ret; 1614 } 1615 } 1616 1617 /* MCQ resource provided in DT */ 1618 res = &hba->res[RES_MCQ]; 1619 /* Bail if MCQ resource is provided */ 1620 if (res->base) 1621 goto out; 1622 1623 /* Explicitly allocate MCQ resource from ufs_mem */ 1624 res_mcq = devm_kzalloc(hba->dev, sizeof(*res_mcq), GFP_KERNEL); 1625 if (!res_mcq) 1626 return -ENOMEM; 1627 1628 res_mcq->start = res_mem->start + 1629 MCQ_SQATTR_OFFSET(hba->mcq_capabilities); 1630 res_mcq->end = res_mcq->start + hba->nr_hw_queues * MCQ_QCFG_SIZE - 1; 1631 res_mcq->flags = res_mem->flags; 1632 res_mcq->name = "mcq"; 1633 1634 ret = insert_resource(&iomem_resource, res_mcq); 1635 if (ret) { 1636 dev_err(hba->dev, "Failed to insert MCQ resource, err=%d\n", 1637 ret); 1638 return ret; 1639 } 1640 1641 res->base = devm_ioremap_resource(hba->dev, res_mcq); 1642 if (IS_ERR(res->base)) { 1643 dev_err(hba->dev, "MCQ registers mapping failed, err=%d\n", 1644 (int)PTR_ERR(res->base)); 1645 ret = PTR_ERR(res->base); 1646 goto ioremap_err; 1647 } 1648 1649 out: 1650 hba->mcq_base = res->base; 1651 return 0; 1652 ioremap_err: 1653 res->base = NULL; 1654 remove_resource(res_mcq); 1655 return ret; 1656 } 1657 1658 static int ufs_qcom_op_runtime_config(struct ufs_hba *hba) 1659 { 1660 struct ufshcd_res_info *mem_res, *sqdao_res; 1661 struct ufshcd_mcq_opr_info_t *opr; 1662 int i; 1663 1664 mem_res = &hba->res[RES_UFS]; 1665 sqdao_res = &hba->res[RES_MCQ_SQD]; 1666 1667 if (!mem_res->base || !sqdao_res->base) 1668 return -EINVAL; 1669 1670 for (i = 0; i < OPR_MAX; i++) { 1671 opr = &hba->mcq_opr[i]; 1672 opr->offset = sqdao_res->resource->start - 1673 mem_res->resource->start + 0x40 * i; 1674 opr->stride = 0x100; 1675 opr->base = sqdao_res->base + 0x40 * i; 1676 } 1677 1678 return 0; 1679 } 1680 1681 static int ufs_qcom_get_hba_mac(struct ufs_hba *hba) 1682 { 1683 /* Qualcomm HC supports up to 64 */ 1684 return MAX_SUPP_MAC; 1685 } 1686 1687 static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba, 1688 unsigned long *ocqs) 1689 { 1690 struct ufshcd_res_info *mcq_vs_res = &hba->res[RES_MCQ_VS]; 1691 1692 if (!mcq_vs_res->base) 1693 return -EINVAL; 1694 1695 *ocqs = readl(mcq_vs_res->base + UFS_MEM_CQIS_VS); 1696 1697 return 0; 1698 } 1699 1700 static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) 1701 { 1702 struct device *dev = msi_desc_to_dev(desc); 1703 struct ufs_hba *hba = dev_get_drvdata(dev); 1704 1705 ufshcd_mcq_config_esi(hba, msg); 1706 } 1707 1708 static irqreturn_t ufs_qcom_mcq_esi_handler(int irq, void *data) 1709 { 1710 struct msi_desc *desc = data; 1711 struct device *dev = msi_desc_to_dev(desc); 1712 struct ufs_hba *hba = dev_get_drvdata(dev); 1713 u32 id = desc->msi_index; 1714 struct ufs_hw_queue *hwq = &hba->uhq[id]; 1715 1716 ufshcd_mcq_write_cqis(hba, 0x1, id); 1717 ufshcd_mcq_poll_cqe_lock(hba, hwq); 1718 1719 return IRQ_HANDLED; 1720 } 1721 1722 static int ufs_qcom_config_esi(struct ufs_hba *hba) 1723 { 1724 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1725 struct msi_desc *desc; 1726 struct msi_desc *failed_desc = NULL; 1727 int nr_irqs, ret; 1728 1729 if (host->esi_enabled) 1730 return 0; 1731 1732 /* 1733 * 1. We only handle CQs as of now. 1734 * 2. Poll queues do not need ESI. 1735 */ 1736 nr_irqs = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL]; 1737 ret = platform_device_msi_init_and_alloc_irqs(hba->dev, nr_irqs, 1738 ufs_qcom_write_msi_msg); 1739 if (ret) { 1740 dev_err(hba->dev, "Failed to request Platform MSI %d\n", ret); 1741 return ret; 1742 } 1743 1744 msi_lock_descs(hba->dev); 1745 msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { 1746 ret = devm_request_irq(hba->dev, desc->irq, 1747 ufs_qcom_mcq_esi_handler, 1748 IRQF_SHARED, "qcom-mcq-esi", desc); 1749 if (ret) { 1750 dev_err(hba->dev, "%s: Fail to request IRQ for %d, err = %d\n", 1751 __func__, desc->irq, ret); 1752 failed_desc = desc; 1753 break; 1754 } 1755 } 1756 msi_unlock_descs(hba->dev); 1757 1758 if (ret) { 1759 /* Rewind */ 1760 msi_lock_descs(hba->dev); 1761 msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { 1762 if (desc == failed_desc) 1763 break; 1764 devm_free_irq(hba->dev, desc->irq, hba); 1765 } 1766 msi_unlock_descs(hba->dev); 1767 platform_device_msi_free_irqs_all(hba->dev); 1768 } else { 1769 if (host->hw_ver.major == 6 && host->hw_ver.minor == 0 && 1770 host->hw_ver.step == 0) 1771 ufshcd_rmwl(hba, ESI_VEC_MASK, 1772 FIELD_PREP(ESI_VEC_MASK, MAX_ESI_VEC - 1), 1773 REG_UFS_CFG3); 1774 ufshcd_mcq_enable_esi(hba); 1775 host->esi_enabled = true; 1776 } 1777 1778 return ret; 1779 } 1780 1781 /* 1782 * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations 1783 * 1784 * The variant operations configure the necessary controller and PHY 1785 * handshake during initialization. 1786 */ 1787 static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { 1788 .name = "qcom", 1789 .init = ufs_qcom_init, 1790 .exit = ufs_qcom_exit, 1791 .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, 1792 .clk_scale_notify = ufs_qcom_clk_scale_notify, 1793 .setup_clocks = ufs_qcom_setup_clocks, 1794 .hce_enable_notify = ufs_qcom_hce_enable_notify, 1795 .link_startup_notify = ufs_qcom_link_startup_notify, 1796 .pwr_change_notify = ufs_qcom_pwr_change_notify, 1797 .apply_dev_quirks = ufs_qcom_apply_dev_quirks, 1798 .suspend = ufs_qcom_suspend, 1799 .resume = ufs_qcom_resume, 1800 .dbg_register_dump = ufs_qcom_dump_dbg_regs, 1801 .device_reset = ufs_qcom_device_reset, 1802 .config_scaling_param = ufs_qcom_config_scaling_param, 1803 .program_key = ufs_qcom_ice_program_key, 1804 .reinit_notify = ufs_qcom_reinit_notify, 1805 .mcq_config_resource = ufs_qcom_mcq_config_resource, 1806 .get_hba_mac = ufs_qcom_get_hba_mac, 1807 .op_runtime_config = ufs_qcom_op_runtime_config, 1808 .get_outstanding_cqs = ufs_qcom_get_outstanding_cqs, 1809 .config_esi = ufs_qcom_config_esi, 1810 }; 1811 1812 /** 1813 * ufs_qcom_probe - probe routine of the driver 1814 * @pdev: pointer to Platform device handle 1815 * 1816 * Return: zero for success and non-zero for failure. 1817 */ 1818 static int ufs_qcom_probe(struct platform_device *pdev) 1819 { 1820 int err; 1821 struct device *dev = &pdev->dev; 1822 1823 /* Perform generic probe */ 1824 err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); 1825 if (err) 1826 return dev_err_probe(dev, err, "ufshcd_pltfrm_init() failed\n"); 1827 1828 return 0; 1829 } 1830 1831 /** 1832 * ufs_qcom_remove - set driver_data of the device to NULL 1833 * @pdev: pointer to platform device handle 1834 * 1835 * Always returns 0 1836 */ 1837 static void ufs_qcom_remove(struct platform_device *pdev) 1838 { 1839 struct ufs_hba *hba = platform_get_drvdata(pdev); 1840 1841 pm_runtime_get_sync(&(pdev)->dev); 1842 ufshcd_remove(hba); 1843 platform_device_msi_free_irqs_all(hba->dev); 1844 } 1845 1846 static const struct of_device_id ufs_qcom_of_match[] __maybe_unused = { 1847 { .compatible = "qcom,ufshc"}, 1848 {}, 1849 }; 1850 MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); 1851 1852 #ifdef CONFIG_ACPI 1853 static const struct acpi_device_id ufs_qcom_acpi_match[] = { 1854 { "QCOM24A5" }, 1855 { }, 1856 }; 1857 MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); 1858 #endif 1859 1860 static const struct dev_pm_ops ufs_qcom_pm_ops = { 1861 SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) 1862 .prepare = ufshcd_suspend_prepare, 1863 .complete = ufshcd_resume_complete, 1864 #ifdef CONFIG_PM_SLEEP 1865 .suspend = ufshcd_system_suspend, 1866 .resume = ufshcd_system_resume, 1867 .freeze = ufshcd_system_freeze, 1868 .restore = ufshcd_system_restore, 1869 .thaw = ufshcd_system_thaw, 1870 #endif 1871 }; 1872 1873 static struct platform_driver ufs_qcom_pltform = { 1874 .probe = ufs_qcom_probe, 1875 .remove_new = ufs_qcom_remove, 1876 .driver = { 1877 .name = "ufshcd-qcom", 1878 .pm = &ufs_qcom_pm_ops, 1879 .of_match_table = of_match_ptr(ufs_qcom_of_match), 1880 .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), 1881 }, 1882 }; 1883 module_platform_driver(ufs_qcom_pltform); 1884 1885 MODULE_LICENSE("GPL v2"); 1886