1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. 4 */ 5 6 #include <linux/acpi.h> 7 #include <linux/clk.h> 8 #include <linux/delay.h> 9 #include <linux/devfreq.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/interconnect.h> 12 #include <linux/module.h> 13 #include <linux/of.h> 14 #include <linux/phy/phy.h> 15 #include <linux/platform_device.h> 16 #include <linux/reset-controller.h> 17 #include <linux/time.h> 18 19 #include <soc/qcom/ice.h> 20 21 #include <ufs/ufshcd.h> 22 #include <ufs/ufshci.h> 23 #include <ufs/ufs_quirks.h> 24 #include <ufs/unipro.h> 25 #include "ufshcd-pltfrm.h" 26 #include "ufs-qcom.h" 27 28 #define MCQ_QCFGPTR_MASK GENMASK(7, 0) 29 #define MCQ_QCFGPTR_UNIT 0x200 30 #define MCQ_SQATTR_OFFSET(c) \ 31 ((((c) >> 16) & MCQ_QCFGPTR_MASK) * MCQ_QCFGPTR_UNIT) 32 #define MCQ_QCFG_SIZE 0x40 33 34 enum { 35 TSTBUS_UAWM, 36 TSTBUS_UARM, 37 TSTBUS_TXUC, 38 TSTBUS_RXUC, 39 TSTBUS_DFC, 40 TSTBUS_TRLUT, 41 TSTBUS_TMRLUT, 42 TSTBUS_OCSC, 43 TSTBUS_UTP_HCI, 44 TSTBUS_COMBINED, 45 TSTBUS_WRAPPER, 46 TSTBUS_UNIPRO, 47 TSTBUS_MAX, 48 }; 49 50 #define QCOM_UFS_MAX_GEAR 5 51 #define QCOM_UFS_MAX_LANE 2 52 53 enum { 54 MODE_MIN, 55 MODE_PWM, 56 MODE_HS_RA, 57 MODE_HS_RB, 58 MODE_MAX, 59 }; 60 61 static const struct __ufs_qcom_bw_table { 62 u32 mem_bw; 63 u32 cfg_bw; 64 } ufs_qcom_bw_table[MODE_MAX + 1][QCOM_UFS_MAX_GEAR + 1][QCOM_UFS_MAX_LANE + 1] = { 65 [MODE_MIN][0][0] = { 0, 0 }, /* Bandwidth values in KB/s */ 66 [MODE_PWM][UFS_PWM_G1][UFS_LANE_1] = { 922, 1000 }, 67 [MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 }, 68 [MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 }, 69 [MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 }, 70 [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 }, 71 [MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 }, 72 [MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 }, 73 [MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 }, 74 [MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 }, 75 [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 }, 76 [MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 }, 77 [MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 }, 78 [MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, 79 [MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, 80 [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, 81 [MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 }, 82 [MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 }, 83 [MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, 84 [MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, 85 [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, 86 [MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 }, 87 [MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 }, 88 [MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, 89 [MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, 90 [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, 91 [MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 }, 92 [MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 }, 93 [MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, 94 [MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, 95 [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, 96 [MODE_MAX][0][0] = { 7643136, 819200 }, 97 }; 98 99 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); 100 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up); 101 102 static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) 103 { 104 return container_of(rcd, struct ufs_qcom_host, rcdev); 105 } 106 107 #ifdef CONFIG_SCSI_UFS_CRYPTO 108 109 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) 110 { 111 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 112 qcom_ice_enable(host->ice); 113 } 114 115 static int ufs_qcom_ice_init(struct ufs_qcom_host *host) 116 { 117 struct ufs_hba *hba = host->hba; 118 struct device *dev = hba->dev; 119 struct qcom_ice *ice; 120 121 ice = of_qcom_ice_get(dev); 122 if (ice == ERR_PTR(-EOPNOTSUPP)) { 123 dev_warn(dev, "Disabling inline encryption support\n"); 124 ice = NULL; 125 } 126 127 if (IS_ERR_OR_NULL(ice)) 128 return PTR_ERR_OR_ZERO(ice); 129 130 host->ice = ice; 131 hba->caps |= UFSHCD_CAP_CRYPTO; 132 133 return 0; 134 } 135 136 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) 137 { 138 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 139 return qcom_ice_resume(host->ice); 140 141 return 0; 142 } 143 144 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) 145 { 146 if (host->hba->caps & UFSHCD_CAP_CRYPTO) 147 return qcom_ice_suspend(host->ice); 148 149 return 0; 150 } 151 152 static int ufs_qcom_ice_program_key(struct ufs_hba *hba, 153 const union ufs_crypto_cfg_entry *cfg, 154 int slot) 155 { 156 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 157 union ufs_crypto_cap_entry cap; 158 bool config_enable = 159 cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE; 160 161 /* Only AES-256-XTS has been tested so far. */ 162 cap = hba->crypto_cap_array[cfg->crypto_cap_idx]; 163 if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS || 164 cap.key_size != UFS_CRYPTO_KEY_SIZE_256) 165 return -EOPNOTSUPP; 166 167 if (config_enable) 168 return qcom_ice_program_key(host->ice, 169 QCOM_ICE_CRYPTO_ALG_AES_XTS, 170 QCOM_ICE_CRYPTO_KEY_SIZE_256, 171 cfg->crypto_key, 172 cfg->data_unit_size, slot); 173 else 174 return qcom_ice_evict_key(host->ice, slot); 175 } 176 177 #else 178 179 #define ufs_qcom_ice_program_key NULL 180 181 static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host) 182 { 183 } 184 185 static int ufs_qcom_ice_init(struct ufs_qcom_host *host) 186 { 187 return 0; 188 } 189 190 static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host) 191 { 192 return 0; 193 } 194 195 static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host) 196 { 197 return 0; 198 } 199 #endif 200 201 static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) 202 { 203 if (!host->is_lane_clks_enabled) 204 return; 205 206 clk_bulk_disable_unprepare(host->num_clks, host->clks); 207 208 host->is_lane_clks_enabled = false; 209 } 210 211 static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) 212 { 213 int err; 214 215 err = clk_bulk_prepare_enable(host->num_clks, host->clks); 216 if (err) 217 return err; 218 219 host->is_lane_clks_enabled = true; 220 221 return 0; 222 } 223 224 static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) 225 { 226 int err; 227 struct device *dev = host->hba->dev; 228 229 if (has_acpi_companion(dev)) 230 return 0; 231 232 err = devm_clk_bulk_get_all(dev, &host->clks); 233 if (err <= 0) 234 return err; 235 236 host->num_clks = err; 237 238 return 0; 239 } 240 241 static int ufs_qcom_check_hibern8(struct ufs_hba *hba) 242 { 243 int err; 244 u32 tx_fsm_val; 245 unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); 246 247 do { 248 err = ufshcd_dme_get(hba, 249 UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 250 UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), 251 &tx_fsm_val); 252 if (err || tx_fsm_val == TX_FSM_HIBERN8) 253 break; 254 255 /* sleep for max. 200us */ 256 usleep_range(100, 200); 257 } while (time_before(jiffies, timeout)); 258 259 /* 260 * we might have scheduled out for long during polling so 261 * check the state again. 262 */ 263 if (time_after(jiffies, timeout)) 264 err = ufshcd_dme_get(hba, 265 UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 266 UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), 267 &tx_fsm_val); 268 269 if (err) { 270 dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", 271 __func__, err); 272 } else if (tx_fsm_val != TX_FSM_HIBERN8) { 273 err = tx_fsm_val; 274 dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", 275 __func__, err); 276 } 277 278 return err; 279 } 280 281 static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) 282 { 283 ufshcd_rmwl(host->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1); 284 285 if (host->hw_ver.major >= 0x05) 286 ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); 287 } 288 289 /* 290 * ufs_qcom_host_reset - reset host controller and PHY 291 */ 292 static int ufs_qcom_host_reset(struct ufs_hba *hba) 293 { 294 int ret; 295 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 296 bool reenable_intr; 297 298 if (!host->core_reset) 299 return 0; 300 301 reenable_intr = hba->is_irq_enabled; 302 ufshcd_disable_irq(hba); 303 304 ret = reset_control_assert(host->core_reset); 305 if (ret) { 306 dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", 307 __func__, ret); 308 return ret; 309 } 310 311 /* 312 * The hardware requirement for delay between assert/deassert 313 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to 314 * ~125us (4/32768). To be on the safe side add 200us delay. 315 */ 316 usleep_range(200, 210); 317 318 ret = reset_control_deassert(host->core_reset); 319 if (ret) { 320 dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", 321 __func__, ret); 322 return ret; 323 } 324 325 usleep_range(1000, 1100); 326 327 if (reenable_intr) 328 ufshcd_enable_irq(hba); 329 330 return 0; 331 } 332 333 static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) 334 { 335 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 336 337 if (host->hw_ver.major >= 0x4) 338 return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); 339 340 /* Default is HS-G3 */ 341 return UFS_HS_G3; 342 } 343 344 static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) 345 { 346 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 347 struct ufs_host_params *host_params = &host->host_params; 348 struct phy *phy = host->generic_phy; 349 enum phy_mode mode; 350 int ret; 351 352 /* 353 * HW ver 5 can only support up to HS-G5 Rate-A due to HW limitations. 354 * If the HS-G5 PHY gear is used, update host_params->hs_rate to Rate-A, 355 * so that the subsequent power mode change shall stick to Rate-A. 356 */ 357 if (host->hw_ver.major == 0x5) { 358 if (host->phy_gear == UFS_HS_G5) 359 host_params->hs_rate = PA_HS_MODE_A; 360 else 361 host_params->hs_rate = PA_HS_MODE_B; 362 } 363 364 mode = host_params->hs_rate == PA_HS_MODE_B ? PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A; 365 366 /* Reset UFS Host Controller and PHY */ 367 ret = ufs_qcom_host_reset(hba); 368 if (ret) 369 return ret; 370 371 /* phy initialization - calibrate the phy */ 372 ret = phy_init(phy); 373 if (ret) { 374 dev_err(hba->dev, "%s: phy init failed, ret = %d\n", 375 __func__, ret); 376 return ret; 377 } 378 379 ret = phy_set_mode_ext(phy, mode, host->phy_gear); 380 if (ret) 381 goto out_disable_phy; 382 383 /* power on phy - start serdes and phy's power and clocks */ 384 ret = phy_power_on(phy); 385 if (ret) { 386 dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", 387 __func__, ret); 388 goto out_disable_phy; 389 } 390 391 ufs_qcom_select_unipro_mode(host); 392 393 return 0; 394 395 out_disable_phy: 396 phy_exit(phy); 397 398 return ret; 399 } 400 401 /* 402 * The UTP controller has a number of internal clock gating cells (CGCs). 403 * Internal hardware sub-modules within the UTP controller control the CGCs. 404 * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved 405 * in a specific operation, UTP controller CGCs are by default disabled and 406 * this function enables them (after every UFS link startup) to save some power 407 * leakage. 408 */ 409 static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) 410 { 411 ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL, 412 REG_UFS_CFG2); 413 414 /* Ensure that HW clock gating is enabled before next operations */ 415 ufshcd_readl(hba, REG_UFS_CFG2); 416 } 417 418 static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, 419 enum ufs_notify_change_status status) 420 { 421 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 422 int err; 423 424 switch (status) { 425 case PRE_CHANGE: 426 err = ufs_qcom_power_up_sequence(hba); 427 if (err) 428 return err; 429 430 /* 431 * The PHY PLL output is the source of tx/rx lane symbol 432 * clocks, hence, enable the lane clocks only after PHY 433 * is initialized. 434 */ 435 err = ufs_qcom_enable_lane_clks(host); 436 break; 437 case POST_CHANGE: 438 /* check if UFS PHY moved from DISABLED to HIBERN8 */ 439 err = ufs_qcom_check_hibern8(hba); 440 ufs_qcom_enable_hw_clk_gating(hba); 441 ufs_qcom_ice_enable(host); 442 break; 443 default: 444 dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); 445 err = -EINVAL; 446 break; 447 } 448 return err; 449 } 450 451 /** 452 * ufs_qcom_cfg_timers - Configure ufs qcom cfg timers 453 * 454 * @hba: host controller instance 455 * @gear: Current operating gear 456 * @hs: current power mode 457 * @rate: current operating rate (A or B) 458 * @update_link_startup_timer: indicate if link_start ongoing 459 * @is_pre_scale_up: flag to check if pre scale up condition. 460 * Return: zero for success and non-zero in case of a failure. 461 */ 462 static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, 463 u32 hs, u32 rate, bool update_link_startup_timer, 464 bool is_pre_scale_up) 465 { 466 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 467 struct ufs_clk_info *clki; 468 unsigned long core_clk_rate = 0; 469 u32 core_clk_cycles_per_us; 470 471 /* 472 * UTP controller uses SYS1CLK_1US_REG register for Interrupt 473 * Aggregation logic. 474 * It is mandatory to write SYS1CLK_1US_REG register on UFS host 475 * controller V4.0.0 onwards. 476 */ 477 if (host->hw_ver.major < 4 && !ufshcd_is_intr_aggr_allowed(hba)) 478 return 0; 479 480 if (gear == 0) { 481 dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); 482 return -EINVAL; 483 } 484 485 list_for_each_entry(clki, &hba->clk_list_head, list) { 486 if (!strcmp(clki->name, "core_clk")) { 487 if (is_pre_scale_up) 488 core_clk_rate = clki->max_freq; 489 else 490 core_clk_rate = clk_get_rate(clki->clk); 491 break; 492 } 493 494 } 495 496 /* If frequency is smaller than 1MHz, set to 1MHz */ 497 if (core_clk_rate < DEFAULT_CLK_RATE_HZ) 498 core_clk_rate = DEFAULT_CLK_RATE_HZ; 499 500 core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; 501 if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { 502 ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); 503 /* 504 * make sure above write gets applied before we return from 505 * this function. 506 */ 507 ufshcd_readl(hba, REG_UFS_SYS1CLK_1US); 508 } 509 510 return 0; 511 } 512 513 static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, 514 enum ufs_notify_change_status status) 515 { 516 int err = 0; 517 518 switch (status) { 519 case PRE_CHANGE: 520 if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, 521 0, true, false)) { 522 dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", 523 __func__); 524 return -EINVAL; 525 } 526 527 err = ufs_qcom_set_core_clk_ctrl(hba, true); 528 if (err) 529 dev_err(hba->dev, "cfg core clk ctrl failed\n"); 530 /* 531 * Some UFS devices (and may be host) have issues if LCC is 532 * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 533 * before link startup which will make sure that both host 534 * and device TX LCC are disabled once link startup is 535 * completed. 536 */ 537 err = ufshcd_disable_host_tx_lcc(hba); 538 539 break; 540 default: 541 break; 542 } 543 544 return err; 545 } 546 547 static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted) 548 { 549 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 550 551 /* reset gpio is optional */ 552 if (!host->device_reset) 553 return; 554 555 gpiod_set_value_cansleep(host->device_reset, asserted); 556 } 557 558 static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, 559 enum ufs_notify_change_status status) 560 { 561 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 562 struct phy *phy = host->generic_phy; 563 564 if (status == PRE_CHANGE) 565 return 0; 566 567 if (ufs_qcom_is_link_off(hba)) { 568 /* 569 * Disable the tx/rx lane symbol clocks before PHY is 570 * powered down as the PLL source should be disabled 571 * after downstream clocks are disabled. 572 */ 573 ufs_qcom_disable_lane_clks(host); 574 phy_power_off(phy); 575 576 /* reset the connected UFS device during power down */ 577 ufs_qcom_device_reset_ctrl(hba, true); 578 579 } else if (!ufs_qcom_is_link_active(hba)) { 580 ufs_qcom_disable_lane_clks(host); 581 } 582 583 return ufs_qcom_ice_suspend(host); 584 } 585 586 static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) 587 { 588 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 589 struct phy *phy = host->generic_phy; 590 int err; 591 592 if (ufs_qcom_is_link_off(hba)) { 593 err = phy_power_on(phy); 594 if (err) { 595 dev_err(hba->dev, "%s: failed PHY power on: %d\n", 596 __func__, err); 597 return err; 598 } 599 600 err = ufs_qcom_enable_lane_clks(host); 601 if (err) 602 return err; 603 604 } else if (!ufs_qcom_is_link_active(hba)) { 605 err = ufs_qcom_enable_lane_clks(host); 606 if (err) 607 return err; 608 } 609 610 return ufs_qcom_ice_resume(host); 611 } 612 613 static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) 614 { 615 if (host->dev_ref_clk_ctrl_mmio && 616 (enable ^ host->is_dev_ref_clk_enabled)) { 617 u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); 618 619 if (enable) 620 temp |= host->dev_ref_clk_en_mask; 621 else 622 temp &= ~host->dev_ref_clk_en_mask; 623 624 /* 625 * If we are here to disable this clock it might be immediately 626 * after entering into hibern8 in which case we need to make 627 * sure that device ref_clk is active for specific time after 628 * hibern8 enter. 629 */ 630 if (!enable) { 631 unsigned long gating_wait; 632 633 gating_wait = host->hba->dev_info.clk_gating_wait_us; 634 if (!gating_wait) { 635 udelay(1); 636 } else { 637 /* 638 * bRefClkGatingWaitTime defines the minimum 639 * time for which the reference clock is 640 * required by device during transition from 641 * HS-MODE to LS-MODE or HIBERN8 state. Give it 642 * more delay to be on the safe side. 643 */ 644 gating_wait += 10; 645 usleep_range(gating_wait, gating_wait + 10); 646 } 647 } 648 649 writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); 650 651 /* 652 * Make sure the write to ref_clk reaches the destination and 653 * not stored in a Write Buffer (WB). 654 */ 655 readl(host->dev_ref_clk_ctrl_mmio); 656 657 /* 658 * If we call hibern8 exit after this, we need to make sure that 659 * device ref_clk is stable for at least 1us before the hibern8 660 * exit command. 661 */ 662 if (enable) 663 udelay(1); 664 665 host->is_dev_ref_clk_enabled = enable; 666 } 667 } 668 669 static int ufs_qcom_icc_set_bw(struct ufs_qcom_host *host, u32 mem_bw, u32 cfg_bw) 670 { 671 struct device *dev = host->hba->dev; 672 int ret; 673 674 ret = icc_set_bw(host->icc_ddr, 0, mem_bw); 675 if (ret < 0) { 676 dev_err(dev, "failed to set bandwidth request: %d\n", ret); 677 return ret; 678 } 679 680 ret = icc_set_bw(host->icc_cpu, 0, cfg_bw); 681 if (ret < 0) { 682 dev_err(dev, "failed to set bandwidth request: %d\n", ret); 683 return ret; 684 } 685 686 return 0; 687 } 688 689 static struct __ufs_qcom_bw_table ufs_qcom_get_bw_table(struct ufs_qcom_host *host) 690 { 691 struct ufs_pa_layer_attr *p = &host->dev_req_params; 692 int gear = max_t(u32, p->gear_rx, p->gear_tx); 693 int lane = max_t(u32, p->lane_rx, p->lane_tx); 694 695 if (WARN_ONCE(gear > QCOM_UFS_MAX_GEAR, 696 "ICC scaling for UFS Gear (%d) not supported. Using Gear (%d) bandwidth\n", 697 gear, QCOM_UFS_MAX_GEAR)) 698 gear = QCOM_UFS_MAX_GEAR; 699 700 if (WARN_ONCE(lane > QCOM_UFS_MAX_LANE, 701 "ICC scaling for UFS Lane (%d) not supported. Using Lane (%d) bandwidth\n", 702 lane, QCOM_UFS_MAX_LANE)) 703 lane = QCOM_UFS_MAX_LANE; 704 705 if (ufshcd_is_hs_mode(p)) { 706 if (p->hs_rate == PA_HS_MODE_B) 707 return ufs_qcom_bw_table[MODE_HS_RB][gear][lane]; 708 else 709 return ufs_qcom_bw_table[MODE_HS_RA][gear][lane]; 710 } else { 711 return ufs_qcom_bw_table[MODE_PWM][gear][lane]; 712 } 713 } 714 715 static int ufs_qcom_icc_update_bw(struct ufs_qcom_host *host) 716 { 717 struct __ufs_qcom_bw_table bw_table; 718 719 bw_table = ufs_qcom_get_bw_table(host); 720 721 return ufs_qcom_icc_set_bw(host, bw_table.mem_bw, bw_table.cfg_bw); 722 } 723 724 static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, 725 enum ufs_notify_change_status status, 726 struct ufs_pa_layer_attr *dev_max_params, 727 struct ufs_pa_layer_attr *dev_req_params) 728 { 729 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 730 struct ufs_host_params *host_params = &host->host_params; 731 int ret = 0; 732 733 if (!dev_req_params) { 734 pr_err("%s: incoming dev_req_params is NULL\n", __func__); 735 return -EINVAL; 736 } 737 738 switch (status) { 739 case PRE_CHANGE: 740 ret = ufshcd_negotiate_pwr_params(host_params, dev_max_params, dev_req_params); 741 if (ret) { 742 dev_err(hba->dev, "%s: failed to determine capabilities\n", 743 __func__); 744 return ret; 745 } 746 747 /* 748 * During UFS driver probe, always update the PHY gear to match the negotiated 749 * gear, so that, if quirk UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is enabled, 750 * the second init can program the optimal PHY settings. This allows one to start 751 * the first init with either the minimum or the maximum support gear. 752 */ 753 if (hba->ufshcd_state == UFSHCD_STATE_RESET) { 754 /* 755 * Skip REINIT if the negotiated gear matches with the 756 * initial phy_gear. Otherwise, update the phy_gear to 757 * program the optimal gear setting during REINIT. 758 */ 759 if (host->phy_gear == dev_req_params->gear_tx) 760 hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 761 else 762 host->phy_gear = dev_req_params->gear_tx; 763 } 764 765 /* enable the device ref clock before changing to HS mode */ 766 if (!ufshcd_is_hs_mode(&hba->pwr_info) && 767 ufshcd_is_hs_mode(dev_req_params)) 768 ufs_qcom_dev_ref_clk_ctrl(host, true); 769 770 if (host->hw_ver.major >= 0x4) { 771 ufshcd_dme_configure_adapt(hba, 772 dev_req_params->gear_tx, 773 PA_INITIAL_ADAPT); 774 } 775 break; 776 case POST_CHANGE: 777 if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, 778 dev_req_params->pwr_rx, 779 dev_req_params->hs_rate, false, false)) { 780 dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", 781 __func__); 782 /* 783 * we return error code at the end of the routine, 784 * but continue to configure UFS_PHY_TX_LANE_ENABLE 785 * and bus voting as usual 786 */ 787 ret = -EINVAL; 788 } 789 790 /* cache the power mode parameters to use internally */ 791 memcpy(&host->dev_req_params, 792 dev_req_params, sizeof(*dev_req_params)); 793 794 ufs_qcom_icc_update_bw(host); 795 796 /* disable the device ref clock if entered PWM mode */ 797 if (ufshcd_is_hs_mode(&hba->pwr_info) && 798 !ufshcd_is_hs_mode(dev_req_params)) 799 ufs_qcom_dev_ref_clk_ctrl(host, false); 800 break; 801 default: 802 ret = -EINVAL; 803 break; 804 } 805 806 return ret; 807 } 808 809 static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) 810 { 811 int err; 812 u32 pa_vs_config_reg1; 813 814 err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), 815 &pa_vs_config_reg1); 816 if (err) 817 return err; 818 819 /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ 820 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), 821 (pa_vs_config_reg1 | (1 << 12))); 822 } 823 824 static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) 825 { 826 int err = 0; 827 828 if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) 829 err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); 830 831 if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC) 832 hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE; 833 834 return err; 835 } 836 837 static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) 838 { 839 return ufshci_version(2, 0); 840 } 841 842 /** 843 * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks 844 * @hba: host controller instance 845 * 846 * QCOM UFS host controller might have some non standard behaviours (quirks) 847 * than what is specified by UFSHCI specification. Advertise all such 848 * quirks to standard UFS host controller driver so standard takes them into 849 * account. 850 */ 851 static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) 852 { 853 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 854 855 if (host->hw_ver.major == 0x2) 856 hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; 857 858 if (host->hw_ver.major > 0x3) 859 hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 860 861 if (of_device_is_compatible(hba->dev->of_node, "qcom,sm8550-ufshc")) 862 hba->quirks |= UFSHCD_QUIRK_BROKEN_LSDBS_CAP; 863 } 864 865 static void ufs_qcom_set_phy_gear(struct ufs_qcom_host *host) 866 { 867 struct ufs_host_params *host_params = &host->host_params; 868 u32 val, dev_major; 869 870 /* 871 * Default to powering up the PHY to the max gear possible, which is 872 * backwards compatible with lower gears but not optimal from 873 * a power usage point of view. After device negotiation, if the 874 * gear is lower a reinit will be performed to program the PHY 875 * to the ideal gear for this combo of controller and device. 876 */ 877 host->phy_gear = host_params->hs_tx_gear; 878 879 if (host->hw_ver.major < 0x4) { 880 /* 881 * These controllers only have one PHY init sequence, 882 * let's power up the PHY using that (the minimum supported 883 * gear, UFS_HS_G2). 884 */ 885 host->phy_gear = UFS_HS_G2; 886 } else if (host->hw_ver.major >= 0x5) { 887 val = ufshcd_readl(host->hba, REG_UFS_DEBUG_SPARE_CFG); 888 dev_major = FIELD_GET(UFS_DEV_VER_MAJOR_MASK, val); 889 890 /* 891 * Since the UFS device version is populated, let's remove the 892 * REINIT quirk as the negotiated gear won't change during boot. 893 * So there is no need to do reinit. 894 */ 895 if (dev_major != 0x0) 896 host->hba->quirks &= ~UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; 897 898 /* 899 * For UFS 3.1 device and older, power up the PHY using HS-G4 900 * PHY gear to save power. 901 */ 902 if (dev_major > 0x0 && dev_major < 0x4) 903 host->phy_gear = UFS_HS_G4; 904 } 905 } 906 907 static void ufs_qcom_set_host_params(struct ufs_hba *hba) 908 { 909 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 910 struct ufs_host_params *host_params = &host->host_params; 911 912 ufshcd_init_host_params(host_params); 913 914 /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ 915 host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba); 916 } 917 918 static void ufs_qcom_set_caps(struct ufs_hba *hba) 919 { 920 hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; 921 hba->caps |= UFSHCD_CAP_CLK_SCALING | UFSHCD_CAP_WB_WITH_CLK_SCALING; 922 hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; 923 hba->caps |= UFSHCD_CAP_WB_EN; 924 hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE; 925 hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND; 926 } 927 928 /** 929 * ufs_qcom_setup_clocks - enables/disable clocks 930 * @hba: host controller instance 931 * @on: If true, enable clocks else disable them. 932 * @status: PRE_CHANGE or POST_CHANGE notify 933 * 934 * Return: 0 on success, non-zero on failure. 935 */ 936 static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, 937 enum ufs_notify_change_status status) 938 { 939 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 940 941 /* 942 * In case ufs_qcom_init() is not yet done, simply ignore. 943 * This ufs_qcom_setup_clocks() shall be called from 944 * ufs_qcom_init() after init is done. 945 */ 946 if (!host) 947 return 0; 948 949 switch (status) { 950 case PRE_CHANGE: 951 if (on) { 952 ufs_qcom_icc_update_bw(host); 953 } else { 954 if (!ufs_qcom_is_link_active(hba)) { 955 /* disable device ref_clk */ 956 ufs_qcom_dev_ref_clk_ctrl(host, false); 957 } 958 } 959 break; 960 case POST_CHANGE: 961 if (on) { 962 /* enable the device ref clock for HS mode*/ 963 if (ufshcd_is_hs_mode(&hba->pwr_info)) 964 ufs_qcom_dev_ref_clk_ctrl(host, true); 965 } else { 966 ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MIN][0][0].mem_bw, 967 ufs_qcom_bw_table[MODE_MIN][0][0].cfg_bw); 968 } 969 break; 970 } 971 972 return 0; 973 } 974 975 static int 976 ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) 977 { 978 struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); 979 980 ufs_qcom_assert_reset(host->hba); 981 /* provide 1ms delay to let the reset pulse propagate. */ 982 usleep_range(1000, 1100); 983 return 0; 984 } 985 986 static int 987 ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) 988 { 989 struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); 990 991 ufs_qcom_deassert_reset(host->hba); 992 993 /* 994 * after reset deassertion, phy will need all ref clocks, 995 * voltage, current to settle down before starting serdes. 996 */ 997 usleep_range(1000, 1100); 998 return 0; 999 } 1000 1001 static const struct reset_control_ops ufs_qcom_reset_ops = { 1002 .assert = ufs_qcom_reset_assert, 1003 .deassert = ufs_qcom_reset_deassert, 1004 }; 1005 1006 static int ufs_qcom_icc_init(struct ufs_qcom_host *host) 1007 { 1008 struct device *dev = host->hba->dev; 1009 int ret; 1010 1011 host->icc_ddr = devm_of_icc_get(dev, "ufs-ddr"); 1012 if (IS_ERR(host->icc_ddr)) 1013 return dev_err_probe(dev, PTR_ERR(host->icc_ddr), 1014 "failed to acquire interconnect path\n"); 1015 1016 host->icc_cpu = devm_of_icc_get(dev, "cpu-ufs"); 1017 if (IS_ERR(host->icc_cpu)) 1018 return dev_err_probe(dev, PTR_ERR(host->icc_cpu), 1019 "failed to acquire interconnect path\n"); 1020 1021 /* 1022 * Set Maximum bandwidth vote before initializing the UFS controller and 1023 * device. Ideally, a minimal interconnect vote would suffice for the 1024 * initialization, but a max vote would allow faster initialization. 1025 */ 1026 ret = ufs_qcom_icc_set_bw(host, ufs_qcom_bw_table[MODE_MAX][0][0].mem_bw, 1027 ufs_qcom_bw_table[MODE_MAX][0][0].cfg_bw); 1028 if (ret < 0) 1029 return dev_err_probe(dev, ret, "failed to set bandwidth request\n"); 1030 1031 return 0; 1032 } 1033 1034 /** 1035 * ufs_qcom_init - bind phy with controller 1036 * @hba: host controller instance 1037 * 1038 * Binds PHY with controller and powers up PHY enabling clocks 1039 * and regulators. 1040 * 1041 * Return: -EPROBE_DEFER if binding fails, returns negative error 1042 * on phy power up failure and returns zero on success. 1043 */ 1044 static int ufs_qcom_init(struct ufs_hba *hba) 1045 { 1046 int err; 1047 struct device *dev = hba->dev; 1048 struct ufs_qcom_host *host; 1049 struct ufs_clk_info *clki; 1050 1051 host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); 1052 if (!host) 1053 return -ENOMEM; 1054 1055 /* Make a two way bind between the qcom host and the hba */ 1056 host->hba = hba; 1057 ufshcd_set_variant(hba, host); 1058 1059 /* Setup the optional reset control of HCI */ 1060 host->core_reset = devm_reset_control_get_optional(hba->dev, "rst"); 1061 if (IS_ERR(host->core_reset)) { 1062 err = dev_err_probe(dev, PTR_ERR(host->core_reset), 1063 "Failed to get reset control\n"); 1064 goto out_variant_clear; 1065 } 1066 1067 /* Fire up the reset controller. Failure here is non-fatal. */ 1068 host->rcdev.of_node = dev->of_node; 1069 host->rcdev.ops = &ufs_qcom_reset_ops; 1070 host->rcdev.owner = dev->driver->owner; 1071 host->rcdev.nr_resets = 1; 1072 err = devm_reset_controller_register(dev, &host->rcdev); 1073 if (err) 1074 dev_warn(dev, "Failed to register reset controller\n"); 1075 1076 if (!has_acpi_companion(dev)) { 1077 host->generic_phy = devm_phy_get(dev, "ufsphy"); 1078 if (IS_ERR(host->generic_phy)) { 1079 err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n"); 1080 goto out_variant_clear; 1081 } 1082 } 1083 1084 err = ufs_qcom_icc_init(host); 1085 if (err) 1086 goto out_variant_clear; 1087 1088 host->device_reset = devm_gpiod_get_optional(dev, "reset", 1089 GPIOD_OUT_HIGH); 1090 if (IS_ERR(host->device_reset)) { 1091 err = dev_err_probe(dev, PTR_ERR(host->device_reset), 1092 "Failed to acquire device reset gpio\n"); 1093 goto out_variant_clear; 1094 } 1095 1096 ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, 1097 &host->hw_ver.minor, &host->hw_ver.step); 1098 1099 host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; 1100 host->dev_ref_clk_en_mask = BIT(26); 1101 1102 list_for_each_entry(clki, &hba->clk_list_head, list) { 1103 if (!strcmp(clki->name, "core_clk_unipro")) 1104 clki->keep_link_active = true; 1105 } 1106 1107 err = ufs_qcom_init_lane_clks(host); 1108 if (err) 1109 goto out_variant_clear; 1110 1111 ufs_qcom_set_caps(hba); 1112 ufs_qcom_advertise_quirks(hba); 1113 ufs_qcom_set_host_params(hba); 1114 ufs_qcom_set_phy_gear(host); 1115 1116 err = ufs_qcom_ice_init(host); 1117 if (err) 1118 goto out_variant_clear; 1119 1120 ufs_qcom_setup_clocks(hba, true, POST_CHANGE); 1121 1122 ufs_qcom_get_default_testbus_cfg(host); 1123 err = ufs_qcom_testbus_config(host); 1124 if (err) 1125 /* Failure is non-fatal */ 1126 dev_warn(dev, "%s: failed to configure the testbus %d\n", 1127 __func__, err); 1128 1129 return 0; 1130 1131 out_variant_clear: 1132 ufshcd_set_variant(hba, NULL); 1133 1134 return err; 1135 } 1136 1137 static void ufs_qcom_exit(struct ufs_hba *hba) 1138 { 1139 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1140 1141 ufs_qcom_disable_lane_clks(host); 1142 phy_power_off(host->generic_phy); 1143 phy_exit(host->generic_phy); 1144 } 1145 1146 /** 1147 * ufs_qcom_set_clk_40ns_cycles - Configure 40ns clk cycles 1148 * 1149 * @hba: host controller instance 1150 * @cycles_in_1us: No of cycles in 1us to be configured 1151 * 1152 * Returns error if dme get/set configuration for 40ns fails 1153 * and returns zero on success. 1154 */ 1155 static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba, 1156 u32 cycles_in_1us) 1157 { 1158 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1159 u32 cycles_in_40ns; 1160 u32 reg; 1161 int err; 1162 1163 /* 1164 * UFS host controller V4.0.0 onwards needs to program 1165 * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed 1166 * frequency of unipro core clk of UFS host controller. 1167 */ 1168 if (host->hw_ver.major < 4) 1169 return 0; 1170 1171 /* 1172 * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not 1173 * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will 1174 * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware 1175 * specification expect to be 16. Hence use exact hardware spec 1176 * mandated value for cycles_in_40ns instead of calculating using 1177 * generic formulae. 1178 */ 1179 switch (cycles_in_1us) { 1180 case UNIPRO_CORE_CLK_FREQ_403_MHZ: 1181 cycles_in_40ns = 16; 1182 break; 1183 case UNIPRO_CORE_CLK_FREQ_300_MHZ: 1184 cycles_in_40ns = 12; 1185 break; 1186 case UNIPRO_CORE_CLK_FREQ_201_5_MHZ: 1187 cycles_in_40ns = 8; 1188 break; 1189 case UNIPRO_CORE_CLK_FREQ_150_MHZ: 1190 cycles_in_40ns = 6; 1191 break; 1192 case UNIPRO_CORE_CLK_FREQ_100_MHZ: 1193 cycles_in_40ns = 4; 1194 break; 1195 case UNIPRO_CORE_CLK_FREQ_75_MHZ: 1196 cycles_in_40ns = 3; 1197 break; 1198 case UNIPRO_CORE_CLK_FREQ_37_5_MHZ: 1199 cycles_in_40ns = 2; 1200 break; 1201 default: 1202 dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n", 1203 cycles_in_1us); 1204 return -EINVAL; 1205 } 1206 1207 err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), ®); 1208 if (err) 1209 return err; 1210 1211 reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK; 1212 reg |= cycles_in_40ns; 1213 1214 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg); 1215 } 1216 1217 static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba, bool is_scale_up) 1218 { 1219 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1220 struct list_head *head = &hba->clk_list_head; 1221 struct ufs_clk_info *clki; 1222 u32 cycles_in_1us = 0; 1223 u32 core_clk_ctrl_reg; 1224 int err; 1225 1226 list_for_each_entry(clki, head, list) { 1227 if (!IS_ERR_OR_NULL(clki->clk) && 1228 !strcmp(clki->name, "core_clk_unipro")) { 1229 if (!clki->max_freq) 1230 cycles_in_1us = 150; /* default for backwards compatibility */ 1231 else if (is_scale_up) 1232 cycles_in_1us = ceil(clki->max_freq, (1000 * 1000)); 1233 else 1234 cycles_in_1us = ceil(clk_get_rate(clki->clk), (1000 * 1000)); 1235 break; 1236 } 1237 } 1238 1239 err = ufshcd_dme_get(hba, 1240 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1241 &core_clk_ctrl_reg); 1242 if (err) 1243 return err; 1244 1245 /* Bit mask is different for UFS host controller V4.0.0 onwards */ 1246 if (host->hw_ver.major >= 4) { 1247 if (!FIELD_FIT(CLK_1US_CYCLES_MASK_V4, cycles_in_1us)) 1248 return -ERANGE; 1249 core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4; 1250 core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us); 1251 } else { 1252 if (!FIELD_FIT(CLK_1US_CYCLES_MASK, cycles_in_1us)) 1253 return -ERANGE; 1254 core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK; 1255 core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us); 1256 } 1257 1258 /* Clear CORE_CLK_DIV_EN */ 1259 core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; 1260 1261 err = ufshcd_dme_set(hba, 1262 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1263 core_clk_ctrl_reg); 1264 if (err) 1265 return err; 1266 1267 /* Configure unipro core clk 40ns attribute */ 1268 return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us); 1269 } 1270 1271 static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) 1272 { 1273 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1274 struct ufs_pa_layer_attr *attr = &host->dev_req_params; 1275 int ret; 1276 1277 ret = ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx, 1278 attr->hs_rate, false, true); 1279 if (ret) { 1280 dev_err(hba->dev, "%s ufs cfg timer failed\n", __func__); 1281 return ret; 1282 } 1283 /* set unipro core clock attributes and clear clock divider */ 1284 return ufs_qcom_set_core_clk_ctrl(hba, true); 1285 } 1286 1287 static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) 1288 { 1289 return 0; 1290 } 1291 1292 static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) 1293 { 1294 int err; 1295 u32 core_clk_ctrl_reg; 1296 1297 err = ufshcd_dme_get(hba, 1298 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1299 &core_clk_ctrl_reg); 1300 1301 /* make sure CORE_CLK_DIV_EN is cleared */ 1302 if (!err && 1303 (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { 1304 core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; 1305 err = ufshcd_dme_set(hba, 1306 UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), 1307 core_clk_ctrl_reg); 1308 } 1309 1310 return err; 1311 } 1312 1313 static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) 1314 { 1315 /* set unipro core clock attributes and clear clock divider */ 1316 return ufs_qcom_set_core_clk_ctrl(hba, false); 1317 } 1318 1319 static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, 1320 bool scale_up, enum ufs_notify_change_status status) 1321 { 1322 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1323 int err; 1324 1325 /* check the host controller state before sending hibern8 cmd */ 1326 if (!ufshcd_is_hba_active(hba)) 1327 return 0; 1328 1329 if (status == PRE_CHANGE) { 1330 err = ufshcd_uic_hibern8_enter(hba); 1331 if (err) 1332 return err; 1333 if (scale_up) 1334 err = ufs_qcom_clk_scale_up_pre_change(hba); 1335 else 1336 err = ufs_qcom_clk_scale_down_pre_change(hba); 1337 1338 if (err) { 1339 ufshcd_uic_hibern8_exit(hba); 1340 return err; 1341 } 1342 } else { 1343 if (scale_up) 1344 err = ufs_qcom_clk_scale_up_post_change(hba); 1345 else 1346 err = ufs_qcom_clk_scale_down_post_change(hba); 1347 1348 1349 if (err) { 1350 ufshcd_uic_hibern8_exit(hba); 1351 return err; 1352 } 1353 1354 ufs_qcom_icc_update_bw(host); 1355 ufshcd_uic_hibern8_exit(hba); 1356 } 1357 1358 return 0; 1359 } 1360 1361 static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) 1362 { 1363 ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 1364 UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); 1365 ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); 1366 } 1367 1368 static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) 1369 { 1370 /* provide a legal default configuration */ 1371 host->testbus.select_major = TSTBUS_UNIPRO; 1372 host->testbus.select_minor = 37; 1373 } 1374 1375 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) 1376 { 1377 if (host->testbus.select_major >= TSTBUS_MAX) { 1378 dev_err(host->hba->dev, 1379 "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", 1380 __func__, host->testbus.select_major); 1381 return false; 1382 } 1383 1384 return true; 1385 } 1386 1387 int ufs_qcom_testbus_config(struct ufs_qcom_host *host) 1388 { 1389 int reg; 1390 int offset; 1391 u32 mask = TEST_BUS_SUB_SEL_MASK; 1392 1393 if (!host) 1394 return -EINVAL; 1395 1396 if (!ufs_qcom_testbus_cfg_is_ok(host)) 1397 return -EPERM; 1398 1399 switch (host->testbus.select_major) { 1400 case TSTBUS_UAWM: 1401 reg = UFS_TEST_BUS_CTRL_0; 1402 offset = 24; 1403 break; 1404 case TSTBUS_UARM: 1405 reg = UFS_TEST_BUS_CTRL_0; 1406 offset = 16; 1407 break; 1408 case TSTBUS_TXUC: 1409 reg = UFS_TEST_BUS_CTRL_0; 1410 offset = 8; 1411 break; 1412 case TSTBUS_RXUC: 1413 reg = UFS_TEST_BUS_CTRL_0; 1414 offset = 0; 1415 break; 1416 case TSTBUS_DFC: 1417 reg = UFS_TEST_BUS_CTRL_1; 1418 offset = 24; 1419 break; 1420 case TSTBUS_TRLUT: 1421 reg = UFS_TEST_BUS_CTRL_1; 1422 offset = 16; 1423 break; 1424 case TSTBUS_TMRLUT: 1425 reg = UFS_TEST_BUS_CTRL_1; 1426 offset = 8; 1427 break; 1428 case TSTBUS_OCSC: 1429 reg = UFS_TEST_BUS_CTRL_1; 1430 offset = 0; 1431 break; 1432 case TSTBUS_WRAPPER: 1433 reg = UFS_TEST_BUS_CTRL_2; 1434 offset = 16; 1435 break; 1436 case TSTBUS_COMBINED: 1437 reg = UFS_TEST_BUS_CTRL_2; 1438 offset = 8; 1439 break; 1440 case TSTBUS_UTP_HCI: 1441 reg = UFS_TEST_BUS_CTRL_2; 1442 offset = 0; 1443 break; 1444 case TSTBUS_UNIPRO: 1445 reg = UFS_UNIPRO_CFG; 1446 offset = 20; 1447 mask = 0xFFF; 1448 break; 1449 /* 1450 * No need for a default case, since 1451 * ufs_qcom_testbus_cfg_is_ok() checks that the configuration 1452 * is legal 1453 */ 1454 } 1455 mask <<= offset; 1456 ufshcd_rmwl(host->hba, TEST_BUS_SEL, 1457 (u32)host->testbus.select_major << 19, 1458 REG_UFS_CFG1); 1459 ufshcd_rmwl(host->hba, mask, 1460 (u32)host->testbus.select_minor << offset, 1461 reg); 1462 ufs_qcom_enable_test_bus(host); 1463 1464 return 0; 1465 } 1466 1467 static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) 1468 { 1469 u32 reg; 1470 struct ufs_qcom_host *host; 1471 1472 host = ufshcd_get_variant(hba); 1473 1474 ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, 1475 "HCI Vendor Specific Registers "); 1476 1477 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); 1478 ufshcd_dump_regs(hba, reg, 44 * 4, "UFS_UFS_DBG_RD_REG_OCSC "); 1479 1480 reg = ufshcd_readl(hba, REG_UFS_CFG1); 1481 reg |= UTP_DBG_RAMS_EN; 1482 ufshcd_writel(hba, reg, REG_UFS_CFG1); 1483 1484 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); 1485 ufshcd_dump_regs(hba, reg, 32 * 4, "UFS_UFS_DBG_RD_EDTL_RAM "); 1486 1487 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); 1488 ufshcd_dump_regs(hba, reg, 128 * 4, "UFS_UFS_DBG_RD_DESC_RAM "); 1489 1490 reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); 1491 ufshcd_dump_regs(hba, reg, 64 * 4, "UFS_UFS_DBG_RD_PRDT_RAM "); 1492 1493 /* clear bit 17 - UTP_DBG_RAMS_EN */ 1494 ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); 1495 1496 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); 1497 ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UAWM "); 1498 1499 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); 1500 ufshcd_dump_regs(hba, reg, 4 * 4, "UFS_DBG_RD_REG_UARM "); 1501 1502 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); 1503 ufshcd_dump_regs(hba, reg, 48 * 4, "UFS_DBG_RD_REG_TXUC "); 1504 1505 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); 1506 ufshcd_dump_regs(hba, reg, 27 * 4, "UFS_DBG_RD_REG_RXUC "); 1507 1508 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); 1509 ufshcd_dump_regs(hba, reg, 19 * 4, "UFS_DBG_RD_REG_DFC "); 1510 1511 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); 1512 ufshcd_dump_regs(hba, reg, 34 * 4, "UFS_DBG_RD_REG_TRLUT "); 1513 1514 reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); 1515 ufshcd_dump_regs(hba, reg, 9 * 4, "UFS_DBG_RD_REG_TMRLUT "); 1516 } 1517 1518 /** 1519 * ufs_qcom_device_reset() - toggle the (optional) device reset line 1520 * @hba: per-adapter instance 1521 * 1522 * Toggles the (optional) reset line to reset the attached device. 1523 */ 1524 static int ufs_qcom_device_reset(struct ufs_hba *hba) 1525 { 1526 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1527 1528 /* reset gpio is optional */ 1529 if (!host->device_reset) 1530 return -EOPNOTSUPP; 1531 1532 /* 1533 * The UFS device shall detect reset pulses of 1us, sleep for 10us to 1534 * be on the safe side. 1535 */ 1536 ufs_qcom_device_reset_ctrl(hba, true); 1537 usleep_range(10, 15); 1538 1539 ufs_qcom_device_reset_ctrl(hba, false); 1540 usleep_range(10, 15); 1541 1542 return 0; 1543 } 1544 1545 #if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) 1546 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, 1547 struct devfreq_dev_profile *p, 1548 struct devfreq_simple_ondemand_data *d) 1549 { 1550 p->polling_ms = 60; 1551 p->timer = DEVFREQ_TIMER_DELAYED; 1552 d->upthreshold = 70; 1553 d->downdifferential = 5; 1554 1555 hba->clk_scaling.suspend_on_no_request = true; 1556 } 1557 #else 1558 static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, 1559 struct devfreq_dev_profile *p, 1560 struct devfreq_simple_ondemand_data *data) 1561 { 1562 } 1563 #endif 1564 1565 static void ufs_qcom_reinit_notify(struct ufs_hba *hba) 1566 { 1567 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1568 1569 phy_power_off(host->generic_phy); 1570 } 1571 1572 /* Resources */ 1573 static const struct ufshcd_res_info ufs_res_info[RES_MAX] = { 1574 {.name = "ufs_mem",}, 1575 {.name = "mcq",}, 1576 /* Submission Queue DAO */ 1577 {.name = "mcq_sqd",}, 1578 /* Submission Queue Interrupt Status */ 1579 {.name = "mcq_sqis",}, 1580 /* Completion Queue DAO */ 1581 {.name = "mcq_cqd",}, 1582 /* Completion Queue Interrupt Status */ 1583 {.name = "mcq_cqis",}, 1584 /* MCQ vendor specific */ 1585 {.name = "mcq_vs",}, 1586 }; 1587 1588 static int ufs_qcom_mcq_config_resource(struct ufs_hba *hba) 1589 { 1590 struct platform_device *pdev = to_platform_device(hba->dev); 1591 struct ufshcd_res_info *res; 1592 struct resource *res_mem, *res_mcq; 1593 int i, ret; 1594 1595 memcpy(hba->res, ufs_res_info, sizeof(ufs_res_info)); 1596 1597 for (i = 0; i < RES_MAX; i++) { 1598 res = &hba->res[i]; 1599 res->resource = platform_get_resource_byname(pdev, 1600 IORESOURCE_MEM, 1601 res->name); 1602 if (!res->resource) { 1603 dev_info(hba->dev, "Resource %s not provided\n", res->name); 1604 if (i == RES_UFS) 1605 return -ENODEV; 1606 continue; 1607 } else if (i == RES_UFS) { 1608 res_mem = res->resource; 1609 res->base = hba->mmio_base; 1610 continue; 1611 } 1612 1613 res->base = devm_ioremap_resource(hba->dev, res->resource); 1614 if (IS_ERR(res->base)) { 1615 dev_err(hba->dev, "Failed to map res %s, err=%d\n", 1616 res->name, (int)PTR_ERR(res->base)); 1617 ret = PTR_ERR(res->base); 1618 res->base = NULL; 1619 return ret; 1620 } 1621 } 1622 1623 /* MCQ resource provided in DT */ 1624 res = &hba->res[RES_MCQ]; 1625 /* Bail if MCQ resource is provided */ 1626 if (res->base) 1627 goto out; 1628 1629 /* Explicitly allocate MCQ resource from ufs_mem */ 1630 res_mcq = devm_kzalloc(hba->dev, sizeof(*res_mcq), GFP_KERNEL); 1631 if (!res_mcq) 1632 return -ENOMEM; 1633 1634 res_mcq->start = res_mem->start + 1635 MCQ_SQATTR_OFFSET(hba->mcq_capabilities); 1636 res_mcq->end = res_mcq->start + hba->nr_hw_queues * MCQ_QCFG_SIZE - 1; 1637 res_mcq->flags = res_mem->flags; 1638 res_mcq->name = "mcq"; 1639 1640 ret = insert_resource(&iomem_resource, res_mcq); 1641 if (ret) { 1642 dev_err(hba->dev, "Failed to insert MCQ resource, err=%d\n", 1643 ret); 1644 return ret; 1645 } 1646 1647 res->base = devm_ioremap_resource(hba->dev, res_mcq); 1648 if (IS_ERR(res->base)) { 1649 dev_err(hba->dev, "MCQ registers mapping failed, err=%d\n", 1650 (int)PTR_ERR(res->base)); 1651 ret = PTR_ERR(res->base); 1652 goto ioremap_err; 1653 } 1654 1655 out: 1656 hba->mcq_base = res->base; 1657 return 0; 1658 ioremap_err: 1659 res->base = NULL; 1660 remove_resource(res_mcq); 1661 return ret; 1662 } 1663 1664 static int ufs_qcom_op_runtime_config(struct ufs_hba *hba) 1665 { 1666 struct ufshcd_res_info *mem_res, *sqdao_res; 1667 struct ufshcd_mcq_opr_info_t *opr; 1668 int i; 1669 1670 mem_res = &hba->res[RES_UFS]; 1671 sqdao_res = &hba->res[RES_MCQ_SQD]; 1672 1673 if (!mem_res->base || !sqdao_res->base) 1674 return -EINVAL; 1675 1676 for (i = 0; i < OPR_MAX; i++) { 1677 opr = &hba->mcq_opr[i]; 1678 opr->offset = sqdao_res->resource->start - 1679 mem_res->resource->start + 0x40 * i; 1680 opr->stride = 0x100; 1681 opr->base = sqdao_res->base + 0x40 * i; 1682 } 1683 1684 return 0; 1685 } 1686 1687 static int ufs_qcom_get_hba_mac(struct ufs_hba *hba) 1688 { 1689 /* Qualcomm HC supports up to 64 */ 1690 return MAX_SUPP_MAC; 1691 } 1692 1693 static int ufs_qcom_get_outstanding_cqs(struct ufs_hba *hba, 1694 unsigned long *ocqs) 1695 { 1696 struct ufshcd_res_info *mcq_vs_res = &hba->res[RES_MCQ_VS]; 1697 1698 if (!mcq_vs_res->base) 1699 return -EINVAL; 1700 1701 *ocqs = readl(mcq_vs_res->base + UFS_MEM_CQIS_VS); 1702 1703 return 0; 1704 } 1705 1706 static void ufs_qcom_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) 1707 { 1708 struct device *dev = msi_desc_to_dev(desc); 1709 struct ufs_hba *hba = dev_get_drvdata(dev); 1710 1711 ufshcd_mcq_config_esi(hba, msg); 1712 } 1713 1714 static irqreturn_t ufs_qcom_mcq_esi_handler(int irq, void *data) 1715 { 1716 struct msi_desc *desc = data; 1717 struct device *dev = msi_desc_to_dev(desc); 1718 struct ufs_hba *hba = dev_get_drvdata(dev); 1719 u32 id = desc->msi_index; 1720 struct ufs_hw_queue *hwq = &hba->uhq[id]; 1721 1722 ufshcd_mcq_write_cqis(hba, 0x1, id); 1723 ufshcd_mcq_poll_cqe_lock(hba, hwq); 1724 1725 return IRQ_HANDLED; 1726 } 1727 1728 static int ufs_qcom_config_esi(struct ufs_hba *hba) 1729 { 1730 struct ufs_qcom_host *host = ufshcd_get_variant(hba); 1731 struct msi_desc *desc; 1732 struct msi_desc *failed_desc = NULL; 1733 int nr_irqs, ret; 1734 1735 if (host->esi_enabled) 1736 return 0; 1737 1738 /* 1739 * 1. We only handle CQs as of now. 1740 * 2. Poll queues do not need ESI. 1741 */ 1742 nr_irqs = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL]; 1743 ret = platform_device_msi_init_and_alloc_irqs(hba->dev, nr_irqs, 1744 ufs_qcom_write_msi_msg); 1745 if (ret) { 1746 dev_err(hba->dev, "Failed to request Platform MSI %d\n", ret); 1747 return ret; 1748 } 1749 1750 msi_lock_descs(hba->dev); 1751 msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { 1752 ret = devm_request_irq(hba->dev, desc->irq, 1753 ufs_qcom_mcq_esi_handler, 1754 IRQF_SHARED, "qcom-mcq-esi", desc); 1755 if (ret) { 1756 dev_err(hba->dev, "%s: Fail to request IRQ for %d, err = %d\n", 1757 __func__, desc->irq, ret); 1758 failed_desc = desc; 1759 break; 1760 } 1761 } 1762 msi_unlock_descs(hba->dev); 1763 1764 if (ret) { 1765 /* Rewind */ 1766 msi_lock_descs(hba->dev); 1767 msi_for_each_desc(desc, hba->dev, MSI_DESC_ALL) { 1768 if (desc == failed_desc) 1769 break; 1770 devm_free_irq(hba->dev, desc->irq, hba); 1771 } 1772 msi_unlock_descs(hba->dev); 1773 platform_device_msi_free_irqs_all(hba->dev); 1774 } else { 1775 if (host->hw_ver.major == 6 && host->hw_ver.minor == 0 && 1776 host->hw_ver.step == 0) 1777 ufshcd_rmwl(hba, ESI_VEC_MASK, 1778 FIELD_PREP(ESI_VEC_MASK, MAX_ESI_VEC - 1), 1779 REG_UFS_CFG3); 1780 ufshcd_mcq_enable_esi(hba); 1781 host->esi_enabled = true; 1782 } 1783 1784 return ret; 1785 } 1786 1787 /* 1788 * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations 1789 * 1790 * The variant operations configure the necessary controller and PHY 1791 * handshake during initialization. 1792 */ 1793 static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { 1794 .name = "qcom", 1795 .init = ufs_qcom_init, 1796 .exit = ufs_qcom_exit, 1797 .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, 1798 .clk_scale_notify = ufs_qcom_clk_scale_notify, 1799 .setup_clocks = ufs_qcom_setup_clocks, 1800 .hce_enable_notify = ufs_qcom_hce_enable_notify, 1801 .link_startup_notify = ufs_qcom_link_startup_notify, 1802 .pwr_change_notify = ufs_qcom_pwr_change_notify, 1803 .apply_dev_quirks = ufs_qcom_apply_dev_quirks, 1804 .suspend = ufs_qcom_suspend, 1805 .resume = ufs_qcom_resume, 1806 .dbg_register_dump = ufs_qcom_dump_dbg_regs, 1807 .device_reset = ufs_qcom_device_reset, 1808 .config_scaling_param = ufs_qcom_config_scaling_param, 1809 .program_key = ufs_qcom_ice_program_key, 1810 .reinit_notify = ufs_qcom_reinit_notify, 1811 .mcq_config_resource = ufs_qcom_mcq_config_resource, 1812 .get_hba_mac = ufs_qcom_get_hba_mac, 1813 .op_runtime_config = ufs_qcom_op_runtime_config, 1814 .get_outstanding_cqs = ufs_qcom_get_outstanding_cqs, 1815 .config_esi = ufs_qcom_config_esi, 1816 }; 1817 1818 /** 1819 * ufs_qcom_probe - probe routine of the driver 1820 * @pdev: pointer to Platform device handle 1821 * 1822 * Return: zero for success and non-zero for failure. 1823 */ 1824 static int ufs_qcom_probe(struct platform_device *pdev) 1825 { 1826 int err; 1827 struct device *dev = &pdev->dev; 1828 1829 /* Perform generic probe */ 1830 err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); 1831 if (err) 1832 return dev_err_probe(dev, err, "ufshcd_pltfrm_init() failed\n"); 1833 1834 return 0; 1835 } 1836 1837 /** 1838 * ufs_qcom_remove - set driver_data of the device to NULL 1839 * @pdev: pointer to platform device handle 1840 * 1841 * Always returns 0 1842 */ 1843 static void ufs_qcom_remove(struct platform_device *pdev) 1844 { 1845 struct ufs_hba *hba = platform_get_drvdata(pdev); 1846 1847 pm_runtime_get_sync(&(pdev)->dev); 1848 ufshcd_remove(hba); 1849 platform_device_msi_free_irqs_all(hba->dev); 1850 } 1851 1852 static const struct of_device_id ufs_qcom_of_match[] __maybe_unused = { 1853 { .compatible = "qcom,ufshc" }, 1854 { .compatible = "qcom,sm8550-ufshc" }, 1855 {}, 1856 }; 1857 MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); 1858 1859 #ifdef CONFIG_ACPI 1860 static const struct acpi_device_id ufs_qcom_acpi_match[] = { 1861 { "QCOM24A5" }, 1862 { }, 1863 }; 1864 MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); 1865 #endif 1866 1867 static const struct dev_pm_ops ufs_qcom_pm_ops = { 1868 SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) 1869 .prepare = ufshcd_suspend_prepare, 1870 .complete = ufshcd_resume_complete, 1871 #ifdef CONFIG_PM_SLEEP 1872 .suspend = ufshcd_system_suspend, 1873 .resume = ufshcd_system_resume, 1874 .freeze = ufshcd_system_freeze, 1875 .restore = ufshcd_system_restore, 1876 .thaw = ufshcd_system_thaw, 1877 #endif 1878 }; 1879 1880 static struct platform_driver ufs_qcom_pltform = { 1881 .probe = ufs_qcom_probe, 1882 .remove_new = ufs_qcom_remove, 1883 .driver = { 1884 .name = "ufshcd-qcom", 1885 .pm = &ufs_qcom_pm_ops, 1886 .of_match_table = of_match_ptr(ufs_qcom_of_match), 1887 .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), 1888 }, 1889 }; 1890 module_platform_driver(ufs_qcom_pltform); 1891 1892 MODULE_DESCRIPTION("Qualcomm UFS host controller driver"); 1893 MODULE_LICENSE("GPL v2"); 1894