xref: /linux/drivers/ufs/host/tc-dwc-g210.c (revision e7d759f31ca295d589f7420719c311870bb3166f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Synopsys G210 Test Chip driver
4  *
5  * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
6  *
7  * Authors: Joao Pinto <jpinto@synopsys.com>
8  */
9 
10 #include <linux/module.h>
11 
12 #include <ufs/ufshcd.h>
13 #include <ufs/unipro.h>
14 
15 #include "ufshcd-dwc.h"
16 #include "ufshci-dwc.h"
17 #include "tc-dwc-g210.h"
18 
19 /**
20  * tc_dwc_g210_setup_40bit_rmmi() - configure 40-bit RMMI.
21  * @hba: Pointer to drivers structure
22  *
23  * Return: 0 on success or non-zero value on failure.
24  */
25 static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
26 {
27 	static const struct ufshcd_dme_attr_val setup_attrs[] = {
28 		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
29 		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
30 		{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
31 		{ UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
32 		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
33 		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
34 		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
35 		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
36 								DME_LOCAL },
37 		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
38 								DME_LOCAL },
39 		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14,
40 								DME_LOCAL },
41 		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
42 								DME_LOCAL },
43 		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
44 								DME_LOCAL },
45 		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
46 								DME_LOCAL },
47 		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4,
48 								DME_LOCAL },
49 		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
50 								DME_LOCAL },
51 		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
52 		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
53 		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
54 								DME_LOCAL },
55 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
56 								DME_LOCAL },
57 		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
58 								DME_LOCAL },
59 		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
60 								DME_LOCAL },
61 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
62 								DME_LOCAL },
63 		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
64 								DME_LOCAL },
65 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
66 								DME_LOCAL },
67 		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
68 								DME_LOCAL },
69 		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
70 								DME_LOCAL },
71 		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
72 								DME_LOCAL },
73 		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
74 								DME_LOCAL },
75 		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
76 	};
77 
78 	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
79 						ARRAY_SIZE(setup_attrs));
80 }
81 
82 /**
83  * tc_dwc_g210_setup_20bit_rmmi_lane0() - configure 20-bit RMMI Lane 0.
84  * @hba: Pointer to drivers structure
85  *
86  * Return: 0 on success or non-zero value on failure.
87  */
88 static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
89 {
90 	static const struct ufshcd_dme_attr_val setup_attrs[] = {
91 		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
92 								DME_LOCAL },
93 		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
94 								DME_LOCAL },
95 		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
96 								DME_LOCAL },
97 		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12,
98 								DME_LOCAL },
99 		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
100 								DME_LOCAL },
101 		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
102 								DME_LOCAL },
103 		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2,
104 								DME_LOCAL },
105 		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
106 								DME_LOCAL },
107 		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
108 		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
109 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
110 								DME_LOCAL },
111 		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
112 								DME_LOCAL },
113 		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
114 								DME_LOCAL },
115 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
116 								DME_LOCAL },
117 		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
118 								DME_LOCAL },
119 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
120 								DME_LOCAL },
121 		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
122 								DME_LOCAL },
123 		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
124 								DME_LOCAL },
125 		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
126 								DME_LOCAL },
127 		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
128 	};
129 
130 	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
131 						ARRAY_SIZE(setup_attrs));
132 }
133 
134 /**
135  * tc_dwc_g210_setup_20bit_rmmi_lane1() - configure 20-bit RMMI Lane 1.
136  * @hba: Pointer to drivers structure
137  *
138  * Return: 0 on success or non-zero value on failure.
139  */
140 static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
141 {
142 	int connected_rx_lanes = 0;
143 	int connected_tx_lanes = 0;
144 	int ret = 0;
145 
146 	static const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
147 		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
148 								DME_LOCAL },
149 		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
150 								DME_LOCAL },
151 		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12,
152 								DME_LOCAL },
153 		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
154 								DME_LOCAL },
155 	};
156 
157 	static const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
158 		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
159 								DME_LOCAL },
160 		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
161 								DME_LOCAL },
162 		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2,
163 								DME_LOCAL },
164 		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80,
165 								DME_LOCAL },
166 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03,
167 								DME_LOCAL },
168 		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16,
169 								DME_LOCAL },
170 		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42,
171 								DME_LOCAL },
172 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4,
173 								DME_LOCAL },
174 		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01,
175 								DME_LOCAL },
176 		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01,
177 								DME_LOCAL },
178 		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28,
179 								DME_LOCAL },
180 		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E,
181 								DME_LOCAL },
182 		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f,
183 								DME_LOCAL },
184 	};
185 
186 	/* Get the available lane count */
187 	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILRXDATALANES),
188 			&connected_rx_lanes);
189 	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILTXDATALANES),
190 			&connected_tx_lanes);
191 
192 	if (connected_tx_lanes == 2) {
193 
194 		ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs,
195 						ARRAY_SIZE(setup_tx_attrs));
196 
197 		if (ret)
198 			goto out;
199 	}
200 
201 	if (connected_rx_lanes == 2) {
202 		ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs,
203 						ARRAY_SIZE(setup_rx_attrs));
204 	}
205 
206 out:
207 	return ret;
208 }
209 
210 /**
211  * tc_dwc_g210_setup_20bit_rmmi() - configure 20-bit RMMI.
212  * @hba: Pointer to drivers structure
213  *
214  * Return: 0 on success or non-zero value on failure.
215  */
216 static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba)
217 {
218 	int ret = 0;
219 
220 	static const struct ufshcd_dme_attr_val setup_attrs[] = {
221 		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
222 		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
223 		{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
224 		{ UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
225 		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
226 		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
227 		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
228 	};
229 
230 	ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
231 						ARRAY_SIZE(setup_attrs));
232 	if (ret)
233 		goto out;
234 
235 	/* Lane 0 configuration*/
236 	ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba);
237 	if (ret)
238 		goto out;
239 
240 	/* Lane 1 configuration*/
241 	ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba);
242 	if (ret)
243 		goto out;
244 
245 out:
246 	return ret;
247 }
248 
249 /**
250  * tc_dwc_g210_config_40_bit() - configure 40-bit TC specific attributes.
251  * @hba: Pointer to drivers structure
252  *
253  * Return: 0 on success non-zero value on failure.
254  */
255 int tc_dwc_g210_config_40_bit(struct ufs_hba *hba)
256 {
257 	int ret = 0;
258 
259 	dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n");
260 	ret = tc_dwc_g210_setup_40bit_rmmi(hba);
261 	if (ret) {
262 		dev_err(hba->dev, "Configuration failed\n");
263 		goto out;
264 	}
265 
266 	/* To write Shadow register bank to effective configuration block */
267 	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
268 	if (ret)
269 		goto out;
270 
271 	/* To configure Debug OMC */
272 	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
273 
274 out:
275 	return ret;
276 }
277 EXPORT_SYMBOL(tc_dwc_g210_config_40_bit);
278 
279 /**
280  * tc_dwc_g210_config_20_bit() - configure 20-bit TC specific attributes.
281  * @hba: Pointer to drivers structure
282  *
283  * Return: 0 on success non-zero value on failure.
284  */
285 int tc_dwc_g210_config_20_bit(struct ufs_hba *hba)
286 {
287 	int ret = 0;
288 
289 	dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n");
290 	ret = tc_dwc_g210_setup_20bit_rmmi(hba);
291 	if (ret) {
292 		dev_err(hba->dev, "Configuration failed\n");
293 		goto out;
294 	}
295 
296 	/* To write Shadow register bank to effective configuration block */
297 	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
298 	if (ret)
299 		goto out;
300 
301 	/* To configure Debug OMC */
302 	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
303 
304 out:
305 	return ret;
306 }
307 EXPORT_SYMBOL(tc_dwc_g210_config_20_bit);
308 
309 MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
310 MODULE_DESCRIPTION("Synopsys G210 Test Chip driver");
311 MODULE_LICENSE("Dual BSD/GPL");
312