1 #include <linux/bitops.h> 2 #include <linux/serial_core.h> 3 #include <linux/io.h> 4 #include <linux/gpio.h> 5 6 #define SCI_MAJOR 204 7 #define SCI_MINOR_START 8 8 9 10 /* 11 * SCI register subset common for all port types. 12 * Not all registers will exist on all parts. 13 */ 14 enum { 15 SCSMR, /* Serial Mode Register */ 16 SCBRR, /* Bit Rate Register */ 17 SCSCR, /* Serial Control Register */ 18 SCxSR, /* Serial Status Register */ 19 SCFCR, /* FIFO Control Register */ 20 SCFDR, /* FIFO Data Count Register */ 21 SCxTDR, /* Transmit (FIFO) Data Register */ 22 SCxRDR, /* Receive (FIFO) Data Register */ 23 SCLSR, /* Line Status Register */ 24 SCTFDR, /* Transmit FIFO Data Count Register */ 25 SCRFDR, /* Receive FIFO Data Count Register */ 26 SCSPTR, /* Serial Port Register */ 27 HSSRR, /* Sampling Rate Register */ 28 SCPCR, /* Serial Port Control Register */ 29 SCPDR, /* Serial Port Data Register */ 30 SCDL, /* BRG Frequency Division Register */ 31 SCCKS, /* BRG Clock Select Register */ 32 HSRTRGR, /* Rx FIFO Data Count Trigger Register */ 33 HSTTRGR, /* Tx FIFO Data Count Trigger Register */ 34 35 SCIx_NR_REGS, 36 }; 37 38 39 /* SCSMR (Serial Mode Register) */ 40 #define SCSMR_C_A BIT(7) /* Communication Mode */ 41 #define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */ 42 #define SCSMR_ASYNC 0 /* - Asynchronous mode */ 43 #define SCSMR_CHR BIT(6) /* 7-bit Character Length */ 44 #define SCSMR_PE BIT(5) /* Parity Enable */ 45 #define SCSMR_ODD BIT(4) /* Odd Parity */ 46 #define SCSMR_STOP BIT(3) /* Stop Bit Length */ 47 #define SCSMR_CKS 0x0003 /* Clock Select */ 48 49 /* Serial Mode Register, SCIFA/SCIFB only bits */ 50 #define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */ 51 #define SCSMR_SRC_MASK 0x0700 /* Sampling Control */ 52 #define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */ 53 #define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */ 54 #define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */ 55 #define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */ 56 #define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */ 57 #define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */ 58 #define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ 59 #define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ 60 61 /* Serial Control Register, SCIFA/SCIFB only bits */ 62 #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ 63 #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ 64 65 /* SCxSR (Serial Status Register) on SCI */ 66 #define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ 67 #define SCI_RDRF BIT(6) /* Receive Data Register Full */ 68 #define SCI_ORER BIT(5) /* Overrun Error */ 69 #define SCI_FER BIT(4) /* Framing Error */ 70 #define SCI_PER BIT(3) /* Parity Error */ 71 #define SCI_TEND BIT(2) /* Transmit End */ 72 #define SCI_RESERVED 0x03 /* All reserved bits */ 73 74 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) 75 76 #define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) 77 #define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) 78 #define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) 79 #define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) 80 81 /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ 82 #define SCIF_ER BIT(7) /* Receive Error */ 83 #define SCIF_TEND BIT(6) /* Transmission End */ 84 #define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ 85 #define SCIF_BRK BIT(4) /* Break Detect */ 86 #define SCIF_FER BIT(3) /* Framing Error */ 87 #define SCIF_PER BIT(2) /* Parity Error */ 88 #define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ 89 #define SCIF_DR BIT(0) /* Receive Data Ready */ 90 /* SCIF only (optional) */ 91 #define SCIF_PERC 0xf000 /* Number of Parity Errors */ 92 #define SCIF_FERC 0x0f00 /* Number of Framing Errors */ 93 /*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ 94 #define SCIFA_ORER BIT(9) /* Overrun Error */ 95 96 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) 97 98 #define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) 99 #define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) 100 #define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) 101 #define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) 102 103 /* SCFCR (FIFO Control Register) */ 104 #define SCFCR_RTRG1 BIT(7) /* Receive FIFO Data Count Trigger */ 105 #define SCFCR_RTRG0 BIT(6) 106 #define SCFCR_TTRG1 BIT(5) /* Transmit FIFO Data Count Trigger */ 107 #define SCFCR_TTRG0 BIT(4) 108 #define SCFCR_MCE BIT(3) /* Modem Control Enable */ 109 #define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ 110 #define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ 111 #define SCFCR_LOOP BIT(0) /* Loopback Test */ 112 113 /* SCLSR (Line Status Register) on (H)SCIF */ 114 #define SCLSR_TO BIT(2) /* Timeout */ 115 #define SCLSR_ORER BIT(0) /* Overrun Error */ 116 117 /* SCSPTR (Serial Port Register), optional */ 118 #define SCSPTR_RTSIO BIT(7) /* Serial Port RTS# Pin Input/Output */ 119 #define SCSPTR_RTSDT BIT(6) /* Serial Port RTS# Pin Data */ 120 #define SCSPTR_CTSIO BIT(5) /* Serial Port CTS# Pin Input/Output */ 121 #define SCSPTR_CTSDT BIT(4) /* Serial Port CTS# Pin Data */ 122 #define SCSPTR_SCKIO BIT(3) /* Serial Port Clock Pin Input/Output */ 123 #define SCSPTR_SCKDT BIT(2) /* Serial Port Clock Pin Data */ 124 #define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ 125 #define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ 126 127 /* HSSRR HSCIF */ 128 #define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ 129 130 /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ 131 #define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */ 132 #define SCPCR_CTSC BIT(3) /* Serial Port CTS# Pin / Input Pin */ 133 #define SCPCR_SCKC BIT(2) /* Serial Port SCK Pin / Output Pin */ 134 #define SCPCR_RXDC BIT(1) /* Serial Port RXD Pin / Input Pin */ 135 #define SCPCR_TXDC BIT(0) /* Serial Port TXD Pin / Output Pin */ 136 137 /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ 138 #define SCPDR_RTSD BIT(4) /* Serial Port RTS# Output Pin Data */ 139 #define SCPDR_CTSD BIT(3) /* Serial Port CTS# Input Pin Data */ 140 #define SCPDR_SCKD BIT(2) /* Serial Port SCK Output Pin Data */ 141 #define SCPDR_RXDD BIT(1) /* Serial Port RXD Input Pin Data */ 142 #define SCPDR_TXDD BIT(0) /* Serial Port TXD Output Pin Data */ 143 144 /* 145 * BRG Clock Select Register (Some SCIF and HSCIF) 146 * The Baud Rate Generator for external clock can provide a clock source for 147 * the sampling clock. It outputs either its frequency divided clock, or the 148 * (undivided) (H)SCK external clock. 149 */ 150 #define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ 151 #define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ 152 153 #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) 154 #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_DR | SCIF_RDF) 155 #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) 156 #define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) 157 #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) 158 #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) 159 160 #define SCxSR_ERRORS(port) (to_sci_port(port)->params->error_mask) 161 162 #define SCxSR_RDxF_CLEAR(port) \ 163 (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) 164 #define SCxSR_ERROR_CLEAR(port) \ 165 (to_sci_port(port)->params->error_clear) 166 #define SCxSR_TDxE_CLEAR(port) \ 167 (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) 168 #define SCxSR_BREAK_CLEAR(port) \ 169 (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) 170