1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver core for Samsung SoC onboard UARTs. 4 * 5 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics 6 * http://armlinux.simtec.co.uk/ 7 */ 8 9 /* Note on 2410 error handling 10 * 11 * The s3c2410 manual has a love/hate affair with the contents of the 12 * UERSTAT register in the UART blocks, and keeps marking some of the 13 * error bits as reserved. Having checked with the s3c2410x01, 14 * it copes with BREAKs properly, so I am happy to ignore the RESERVED 15 * feature from the latter versions of the manual. 16 * 17 * If it becomes aparrent that latter versions of the 2410 remove these 18 * bits, then action will have to be taken to differentiate the versions 19 * and change the policy on BREAK 20 * 21 * BJD, 04-Nov-2004 22 */ 23 24 #include <linux/dmaengine.h> 25 #include <linux/dma-mapping.h> 26 #include <linux/slab.h> 27 #include <linux/module.h> 28 #include <linux/ioport.h> 29 #include <linux/io.h> 30 #include <linux/platform_device.h> 31 #include <linux/init.h> 32 #include <linux/sysrq.h> 33 #include <linux/console.h> 34 #include <linux/tty.h> 35 #include <linux/tty_flip.h> 36 #include <linux/serial_core.h> 37 #include <linux/serial.h> 38 #include <linux/serial_s3c.h> 39 #include <linux/delay.h> 40 #include <linux/clk.h> 41 #include <linux/cpufreq.h> 42 #include <linux/of.h> 43 #include <asm/irq.h> 44 45 /* UART name and device definitions */ 46 47 #define S3C24XX_SERIAL_NAME "ttySAC" 48 #define S3C24XX_SERIAL_MAJOR 204 49 #define S3C24XX_SERIAL_MINOR 64 50 51 #ifdef CONFIG_ARM64 52 #define UART_NR 12 53 #else 54 #define UART_NR CONFIG_SERIAL_SAMSUNG_UARTS 55 #endif 56 57 #define S3C24XX_TX_PIO 1 58 #define S3C24XX_TX_DMA 2 59 #define S3C24XX_RX_PIO 1 60 #define S3C24XX_RX_DMA 2 61 62 /* flag to ignore all characters coming in */ 63 #define RXSTAT_DUMMY_READ (0x10000000) 64 65 enum s3c24xx_port_type { 66 TYPE_S3C24XX, 67 TYPE_S3C6400, 68 TYPE_APPLE_S5L, 69 }; 70 71 struct s3c24xx_uart_info { 72 const char *name; 73 enum s3c24xx_port_type type; 74 unsigned int port_type; 75 unsigned int fifosize; 76 unsigned long rx_fifomask; 77 unsigned long rx_fifoshift; 78 unsigned long rx_fifofull; 79 unsigned long tx_fifomask; 80 unsigned long tx_fifoshift; 81 unsigned long tx_fifofull; 82 unsigned int def_clk_sel; 83 unsigned long num_clks; 84 unsigned long clksel_mask; 85 unsigned long clksel_shift; 86 unsigned long ucon_mask; 87 88 /* uart port features */ 89 90 unsigned int has_divslot:1; 91 }; 92 93 struct s3c24xx_serial_drv_data { 94 const struct s3c24xx_uart_info info; 95 const struct s3c2410_uartcfg def_cfg; 96 const unsigned int fifosize[UART_NR]; 97 }; 98 99 struct s3c24xx_uart_dma { 100 unsigned int rx_chan_id; 101 unsigned int tx_chan_id; 102 103 struct dma_slave_config rx_conf; 104 struct dma_slave_config tx_conf; 105 106 struct dma_chan *rx_chan; 107 struct dma_chan *tx_chan; 108 109 dma_addr_t rx_addr; 110 dma_addr_t tx_addr; 111 112 dma_cookie_t rx_cookie; 113 dma_cookie_t tx_cookie; 114 115 char *rx_buf; 116 117 dma_addr_t tx_transfer_addr; 118 119 size_t rx_size; 120 size_t tx_size; 121 122 struct dma_async_tx_descriptor *tx_desc; 123 struct dma_async_tx_descriptor *rx_desc; 124 125 int tx_bytes_requested; 126 int rx_bytes_requested; 127 }; 128 129 struct s3c24xx_uart_port { 130 unsigned char rx_claimed; 131 unsigned char tx_claimed; 132 unsigned char rx_enabled; 133 unsigned char tx_enabled; 134 unsigned int pm_level; 135 unsigned long baudclk_rate; 136 unsigned int min_dma_size; 137 138 unsigned int rx_irq; 139 unsigned int tx_irq; 140 141 unsigned int tx_in_progress; 142 unsigned int tx_mode; 143 unsigned int rx_mode; 144 145 const struct s3c24xx_uart_info *info; 146 struct clk *clk; 147 struct clk *baudclk; 148 struct uart_port port; 149 const struct s3c24xx_serial_drv_data *drv_data; 150 151 /* reference to platform data */ 152 const struct s3c2410_uartcfg *cfg; 153 154 struct s3c24xx_uart_dma *dma; 155 156 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ 157 struct notifier_block freq_transition; 158 #endif 159 }; 160 161 static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport); 162 163 /* conversion functions */ 164 165 #define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev) 166 167 /* register access controls */ 168 169 #define portaddr(port, reg) ((port)->membase + (reg)) 170 #define portaddrl(port, reg) \ 171 ((unsigned long *)(unsigned long)((port)->membase + (reg))) 172 173 static u32 rd_reg(const struct uart_port *port, u32 reg) 174 { 175 switch (port->iotype) { 176 case UPIO_MEM: 177 return readb_relaxed(portaddr(port, reg)); 178 case UPIO_MEM32: 179 return readl_relaxed(portaddr(port, reg)); 180 default: 181 return 0; 182 } 183 return 0; 184 } 185 186 #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) 187 188 static void wr_reg(const struct uart_port *port, u32 reg, u32 val) 189 { 190 switch (port->iotype) { 191 case UPIO_MEM: 192 writeb_relaxed(val, portaddr(port, reg)); 193 break; 194 case UPIO_MEM32: 195 writel_relaxed(val, portaddr(port, reg)); 196 break; 197 } 198 } 199 200 #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg)) 201 202 /* Byte-order aware bit setting/clearing functions. */ 203 204 static inline void s3c24xx_set_bit(const struct uart_port *port, int idx, 205 unsigned int reg) 206 { 207 unsigned long flags; 208 u32 val; 209 210 local_irq_save(flags); 211 val = rd_regl(port, reg); 212 val |= (1 << idx); 213 wr_regl(port, reg, val); 214 local_irq_restore(flags); 215 } 216 217 static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx, 218 unsigned int reg) 219 { 220 unsigned long flags; 221 u32 val; 222 223 local_irq_save(flags); 224 val = rd_regl(port, reg); 225 val &= ~(1 << idx); 226 wr_regl(port, reg, val); 227 local_irq_restore(flags); 228 } 229 230 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) 231 { 232 return container_of(port, struct s3c24xx_uart_port, port); 233 } 234 235 /* translate a port to the device name */ 236 237 static inline const char *s3c24xx_serial_portname(const struct uart_port *port) 238 { 239 return to_platform_device(port->dev)->name; 240 } 241 242 static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port) 243 { 244 return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; 245 } 246 247 static void s3c24xx_serial_rx_enable(struct uart_port *port) 248 { 249 struct s3c24xx_uart_port *ourport = to_ourport(port); 250 unsigned long flags; 251 unsigned int ucon, ufcon; 252 int count = 10000; 253 254 spin_lock_irqsave(&port->lock, flags); 255 256 while (--count && !s3c24xx_serial_txempty_nofifo(port)) 257 udelay(100); 258 259 ufcon = rd_regl(port, S3C2410_UFCON); 260 ufcon |= S3C2410_UFCON_RESETRX; 261 wr_regl(port, S3C2410_UFCON, ufcon); 262 263 ucon = rd_regl(port, S3C2410_UCON); 264 ucon |= S3C2410_UCON_RXIRQMODE; 265 wr_regl(port, S3C2410_UCON, ucon); 266 267 ourport->rx_enabled = 1; 268 spin_unlock_irqrestore(&port->lock, flags); 269 } 270 271 static void s3c24xx_serial_rx_disable(struct uart_port *port) 272 { 273 struct s3c24xx_uart_port *ourport = to_ourport(port); 274 unsigned long flags; 275 unsigned int ucon; 276 277 spin_lock_irqsave(&port->lock, flags); 278 279 ucon = rd_regl(port, S3C2410_UCON); 280 ucon &= ~S3C2410_UCON_RXIRQMODE; 281 wr_regl(port, S3C2410_UCON, ucon); 282 283 ourport->rx_enabled = 0; 284 spin_unlock_irqrestore(&port->lock, flags); 285 } 286 287 static void s3c24xx_serial_stop_tx(struct uart_port *port) 288 { 289 struct s3c24xx_uart_port *ourport = to_ourport(port); 290 struct s3c24xx_uart_dma *dma = ourport->dma; 291 struct circ_buf *xmit = &port->state->xmit; 292 struct dma_tx_state state; 293 int count; 294 295 if (!ourport->tx_enabled) 296 return; 297 298 switch (ourport->info->type) { 299 case TYPE_S3C6400: 300 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); 301 break; 302 case TYPE_APPLE_S5L: 303 s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON); 304 break; 305 default: 306 disable_irq_nosync(ourport->tx_irq); 307 break; 308 } 309 310 if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) { 311 dmaengine_pause(dma->tx_chan); 312 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); 313 dmaengine_terminate_all(dma->tx_chan); 314 dma_sync_single_for_cpu(dma->tx_chan->device->dev, 315 dma->tx_transfer_addr, dma->tx_size, 316 DMA_TO_DEVICE); 317 async_tx_ack(dma->tx_desc); 318 count = dma->tx_bytes_requested - state.residue; 319 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); 320 port->icount.tx += count; 321 } 322 323 ourport->tx_enabled = 0; 324 ourport->tx_in_progress = 0; 325 326 if (port->flags & UPF_CONS_FLOW) 327 s3c24xx_serial_rx_enable(port); 328 329 ourport->tx_mode = 0; 330 } 331 332 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport); 333 334 static void s3c24xx_serial_tx_dma_complete(void *args) 335 { 336 struct s3c24xx_uart_port *ourport = args; 337 struct uart_port *port = &ourport->port; 338 struct circ_buf *xmit = &port->state->xmit; 339 struct s3c24xx_uart_dma *dma = ourport->dma; 340 struct dma_tx_state state; 341 unsigned long flags; 342 int count; 343 344 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state); 345 count = dma->tx_bytes_requested - state.residue; 346 async_tx_ack(dma->tx_desc); 347 348 dma_sync_single_for_cpu(dma->tx_chan->device->dev, 349 dma->tx_transfer_addr, dma->tx_size, 350 DMA_TO_DEVICE); 351 352 spin_lock_irqsave(&port->lock, flags); 353 354 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); 355 port->icount.tx += count; 356 ourport->tx_in_progress = 0; 357 358 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 359 uart_write_wakeup(port); 360 361 s3c24xx_serial_start_next_tx(ourport); 362 spin_unlock_irqrestore(&port->lock, flags); 363 } 364 365 static void enable_tx_dma(struct s3c24xx_uart_port *ourport) 366 { 367 const struct uart_port *port = &ourport->port; 368 u32 ucon; 369 370 /* Mask Tx interrupt */ 371 switch (ourport->info->type) { 372 case TYPE_S3C6400: 373 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM); 374 break; 375 case TYPE_APPLE_S5L: 376 WARN_ON(1); // No DMA 377 break; 378 default: 379 disable_irq_nosync(ourport->tx_irq); 380 break; 381 } 382 383 /* Enable tx dma mode */ 384 ucon = rd_regl(port, S3C2410_UCON); 385 ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK); 386 ucon |= S3C64XX_UCON_TXBURST_1; 387 ucon |= S3C64XX_UCON_TXMODE_DMA; 388 wr_regl(port, S3C2410_UCON, ucon); 389 390 ourport->tx_mode = S3C24XX_TX_DMA; 391 } 392 393 static void enable_tx_pio(struct s3c24xx_uart_port *ourport) 394 { 395 const struct uart_port *port = &ourport->port; 396 u32 ucon, ufcon; 397 398 /* Set ufcon txtrig */ 399 ourport->tx_in_progress = S3C24XX_TX_PIO; 400 ufcon = rd_regl(port, S3C2410_UFCON); 401 wr_regl(port, S3C2410_UFCON, ufcon); 402 403 /* Enable tx pio mode */ 404 ucon = rd_regl(port, S3C2410_UCON); 405 ucon &= ~(S3C64XX_UCON_TXMODE_MASK); 406 ucon |= S3C64XX_UCON_TXMODE_CPU; 407 wr_regl(port, S3C2410_UCON, ucon); 408 409 /* Unmask Tx interrupt */ 410 switch (ourport->info->type) { 411 case TYPE_S3C6400: 412 s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD, 413 S3C64XX_UINTM); 414 break; 415 case TYPE_APPLE_S5L: 416 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; 417 wr_regl(port, S3C2410_UCON, ucon); 418 break; 419 default: 420 enable_irq(ourport->tx_irq); 421 break; 422 } 423 424 ourport->tx_mode = S3C24XX_TX_PIO; 425 426 /* 427 * The Apple version only has edge triggered TX IRQs, so we need 428 * to kick off the process by sending some characters here. 429 */ 430 if (ourport->info->type == TYPE_APPLE_S5L) 431 s3c24xx_serial_tx_chars(ourport); 432 } 433 434 static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport) 435 { 436 if (ourport->tx_mode != S3C24XX_TX_PIO) 437 enable_tx_pio(ourport); 438 } 439 440 static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, 441 unsigned int count) 442 { 443 struct uart_port *port = &ourport->port; 444 struct circ_buf *xmit = &port->state->xmit; 445 struct s3c24xx_uart_dma *dma = ourport->dma; 446 447 if (ourport->tx_mode != S3C24XX_TX_DMA) 448 enable_tx_dma(ourport); 449 450 dma->tx_size = count & ~(dma_get_cache_alignment() - 1); 451 dma->tx_transfer_addr = dma->tx_addr + xmit->tail; 452 453 dma_sync_single_for_device(dma->tx_chan->device->dev, 454 dma->tx_transfer_addr, dma->tx_size, 455 DMA_TO_DEVICE); 456 457 dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan, 458 dma->tx_transfer_addr, dma->tx_size, 459 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); 460 if (!dma->tx_desc) { 461 dev_err(ourport->port.dev, "Unable to get desc for Tx\n"); 462 return -EIO; 463 } 464 465 dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete; 466 dma->tx_desc->callback_param = ourport; 467 dma->tx_bytes_requested = dma->tx_size; 468 469 ourport->tx_in_progress = S3C24XX_TX_DMA; 470 dma->tx_cookie = dmaengine_submit(dma->tx_desc); 471 dma_async_issue_pending(dma->tx_chan); 472 return 0; 473 } 474 475 static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) 476 { 477 struct uart_port *port = &ourport->port; 478 struct circ_buf *xmit = &port->state->xmit; 479 unsigned long count; 480 481 /* Get data size up to the end of buffer */ 482 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 483 484 if (!count) { 485 s3c24xx_serial_stop_tx(port); 486 return; 487 } 488 489 if (!ourport->dma || !ourport->dma->tx_chan || 490 count < ourport->min_dma_size || 491 xmit->tail & (dma_get_cache_alignment() - 1)) 492 s3c24xx_serial_start_tx_pio(ourport); 493 else 494 s3c24xx_serial_start_tx_dma(ourport, count); 495 } 496 497 static void s3c24xx_serial_start_tx(struct uart_port *port) 498 { 499 struct s3c24xx_uart_port *ourport = to_ourport(port); 500 struct circ_buf *xmit = &port->state->xmit; 501 502 if (!ourport->tx_enabled) { 503 if (port->flags & UPF_CONS_FLOW) 504 s3c24xx_serial_rx_disable(port); 505 506 ourport->tx_enabled = 1; 507 if (!ourport->dma || !ourport->dma->tx_chan) 508 s3c24xx_serial_start_tx_pio(ourport); 509 } 510 511 if (ourport->dma && ourport->dma->tx_chan) { 512 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress) 513 s3c24xx_serial_start_next_tx(ourport); 514 } 515 } 516 517 static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport, 518 struct tty_port *tty, int count) 519 { 520 struct s3c24xx_uart_dma *dma = ourport->dma; 521 int copied; 522 523 if (!count) 524 return; 525 526 dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr, 527 dma->rx_size, DMA_FROM_DEVICE); 528 529 ourport->port.icount.rx += count; 530 if (!tty) { 531 dev_err(ourport->port.dev, "No tty port\n"); 532 return; 533 } 534 copied = tty_insert_flip_string(tty, 535 ((unsigned char *)(ourport->dma->rx_buf)), count); 536 if (copied != count) { 537 WARN_ON(1); 538 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n"); 539 } 540 } 541 542 static void s3c24xx_serial_stop_rx(struct uart_port *port) 543 { 544 struct s3c24xx_uart_port *ourport = to_ourport(port); 545 struct s3c24xx_uart_dma *dma = ourport->dma; 546 struct tty_port *t = &port->state->port; 547 struct dma_tx_state state; 548 enum dma_status dma_status; 549 unsigned int received; 550 551 if (ourport->rx_enabled) { 552 dev_dbg(port->dev, "stopping rx\n"); 553 switch (ourport->info->type) { 554 case TYPE_S3C6400: 555 s3c24xx_set_bit(port, S3C64XX_UINTM_RXD, 556 S3C64XX_UINTM); 557 break; 558 case TYPE_APPLE_S5L: 559 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); 560 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); 561 break; 562 default: 563 disable_irq_nosync(ourport->rx_irq); 564 break; 565 } 566 ourport->rx_enabled = 0; 567 } 568 if (dma && dma->rx_chan) { 569 dmaengine_pause(dma->tx_chan); 570 dma_status = dmaengine_tx_status(dma->rx_chan, 571 dma->rx_cookie, &state); 572 if (dma_status == DMA_IN_PROGRESS || 573 dma_status == DMA_PAUSED) { 574 received = dma->rx_bytes_requested - state.residue; 575 dmaengine_terminate_all(dma->rx_chan); 576 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 577 } 578 } 579 } 580 581 static inline const struct s3c24xx_uart_info 582 *s3c24xx_port_to_info(struct uart_port *port) 583 { 584 return to_ourport(port)->info; 585 } 586 587 static inline const struct s3c2410_uartcfg 588 *s3c24xx_port_to_cfg(const struct uart_port *port) 589 { 590 const struct s3c24xx_uart_port *ourport; 591 592 if (port->dev == NULL) 593 return NULL; 594 595 ourport = container_of(port, struct s3c24xx_uart_port, port); 596 return ourport->cfg; 597 } 598 599 static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport, 600 unsigned long ufstat) 601 { 602 const struct s3c24xx_uart_info *info = ourport->info; 603 604 if (ufstat & info->rx_fifofull) 605 return ourport->port.fifosize; 606 607 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; 608 } 609 610 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport); 611 static void s3c24xx_serial_rx_dma_complete(void *args) 612 { 613 struct s3c24xx_uart_port *ourport = args; 614 struct uart_port *port = &ourport->port; 615 616 struct s3c24xx_uart_dma *dma = ourport->dma; 617 struct tty_port *t = &port->state->port; 618 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); 619 620 struct dma_tx_state state; 621 unsigned long flags; 622 int received; 623 624 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); 625 received = dma->rx_bytes_requested - state.residue; 626 async_tx_ack(dma->rx_desc); 627 628 spin_lock_irqsave(&port->lock, flags); 629 630 if (received) 631 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 632 633 if (tty) { 634 tty_flip_buffer_push(t); 635 tty_kref_put(tty); 636 } 637 638 s3c64xx_start_rx_dma(ourport); 639 640 spin_unlock_irqrestore(&port->lock, flags); 641 } 642 643 static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport) 644 { 645 struct s3c24xx_uart_dma *dma = ourport->dma; 646 647 dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr, 648 dma->rx_size, DMA_FROM_DEVICE); 649 650 dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan, 651 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, 652 DMA_PREP_INTERRUPT); 653 if (!dma->rx_desc) { 654 dev_err(ourport->port.dev, "Unable to get desc for Rx\n"); 655 return; 656 } 657 658 dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete; 659 dma->rx_desc->callback_param = ourport; 660 dma->rx_bytes_requested = dma->rx_size; 661 662 dma->rx_cookie = dmaengine_submit(dma->rx_desc); 663 dma_async_issue_pending(dma->rx_chan); 664 } 665 666 /* ? - where has parity gone?? */ 667 #define S3C2410_UERSTAT_PARITY (0x1000) 668 669 static void enable_rx_dma(struct s3c24xx_uart_port *ourport) 670 { 671 struct uart_port *port = &ourport->port; 672 unsigned int ucon; 673 674 /* set Rx mode to DMA mode */ 675 ucon = rd_regl(port, S3C2410_UCON); 676 ucon &= ~(S3C64XX_UCON_RXBURST_MASK | 677 S3C64XX_UCON_TIMEOUT_MASK | 678 S3C64XX_UCON_EMPTYINT_EN | 679 S3C64XX_UCON_DMASUS_EN | 680 S3C64XX_UCON_TIMEOUT_EN | 681 S3C64XX_UCON_RXMODE_MASK); 682 ucon |= S3C64XX_UCON_RXBURST_1 | 683 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | 684 S3C64XX_UCON_EMPTYINT_EN | 685 S3C64XX_UCON_TIMEOUT_EN | 686 S3C64XX_UCON_RXMODE_DMA; 687 wr_regl(port, S3C2410_UCON, ucon); 688 689 ourport->rx_mode = S3C24XX_RX_DMA; 690 } 691 692 static void enable_rx_pio(struct s3c24xx_uart_port *ourport) 693 { 694 struct uart_port *port = &ourport->port; 695 unsigned int ucon; 696 697 /* set Rx mode to DMA mode */ 698 ucon = rd_regl(port, S3C2410_UCON); 699 ucon &= ~S3C64XX_UCON_RXMODE_MASK; 700 ucon |= S3C64XX_UCON_RXMODE_CPU; 701 702 /* Apple types use these bits for IRQ masks */ 703 if (ourport->info->type != TYPE_APPLE_S5L) { 704 ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK | 705 S3C64XX_UCON_EMPTYINT_EN | 706 S3C64XX_UCON_DMASUS_EN | 707 S3C64XX_UCON_TIMEOUT_EN); 708 ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT | 709 S3C64XX_UCON_TIMEOUT_EN; 710 } 711 wr_regl(port, S3C2410_UCON, ucon); 712 713 ourport->rx_mode = S3C24XX_RX_PIO; 714 } 715 716 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport); 717 718 static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id) 719 { 720 unsigned int utrstat, received; 721 struct s3c24xx_uart_port *ourport = dev_id; 722 struct uart_port *port = &ourport->port; 723 struct s3c24xx_uart_dma *dma = ourport->dma; 724 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port); 725 struct tty_port *t = &port->state->port; 726 struct dma_tx_state state; 727 728 utrstat = rd_regl(port, S3C2410_UTRSTAT); 729 rd_regl(port, S3C2410_UFSTAT); 730 731 spin_lock(&port->lock); 732 733 if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) { 734 s3c64xx_start_rx_dma(ourport); 735 if (ourport->rx_mode == S3C24XX_RX_PIO) 736 enable_rx_dma(ourport); 737 goto finish; 738 } 739 740 if (ourport->rx_mode == S3C24XX_RX_DMA) { 741 dmaengine_pause(dma->rx_chan); 742 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state); 743 dmaengine_terminate_all(dma->rx_chan); 744 received = dma->rx_bytes_requested - state.residue; 745 s3c24xx_uart_copy_rx_to_tty(ourport, t, received); 746 747 enable_rx_pio(ourport); 748 } 749 750 s3c24xx_serial_rx_drain_fifo(ourport); 751 752 if (tty) { 753 tty_flip_buffer_push(t); 754 tty_kref_put(tty); 755 } 756 757 wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT); 758 759 finish: 760 spin_unlock(&port->lock); 761 762 return IRQ_HANDLED; 763 } 764 765 static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport) 766 { 767 struct uart_port *port = &ourport->port; 768 unsigned int ufcon, ch, flag, ufstat, uerstat; 769 unsigned int fifocnt = 0; 770 int max_count = port->fifosize; 771 772 while (max_count-- > 0) { 773 /* 774 * Receive all characters known to be in FIFO 775 * before reading FIFO level again 776 */ 777 if (fifocnt == 0) { 778 ufstat = rd_regl(port, S3C2410_UFSTAT); 779 fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat); 780 if (fifocnt == 0) 781 break; 782 } 783 fifocnt--; 784 785 uerstat = rd_regl(port, S3C2410_UERSTAT); 786 ch = rd_reg(port, S3C2410_URXH); 787 788 if (port->flags & UPF_CONS_FLOW) { 789 int txe = s3c24xx_serial_txempty_nofifo(port); 790 791 if (ourport->rx_enabled) { 792 if (!txe) { 793 ourport->rx_enabled = 0; 794 continue; 795 } 796 } else { 797 if (txe) { 798 ufcon = rd_regl(port, S3C2410_UFCON); 799 ufcon |= S3C2410_UFCON_RESETRX; 800 wr_regl(port, S3C2410_UFCON, ufcon); 801 ourport->rx_enabled = 1; 802 return; 803 } 804 continue; 805 } 806 } 807 808 /* insert the character into the buffer */ 809 810 flag = TTY_NORMAL; 811 port->icount.rx++; 812 813 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { 814 dev_dbg(port->dev, 815 "rxerr: port ch=0x%02x, rxs=0x%08x\n", 816 ch, uerstat); 817 818 /* check for break */ 819 if (uerstat & S3C2410_UERSTAT_BREAK) { 820 dev_dbg(port->dev, "break!\n"); 821 port->icount.brk++; 822 if (uart_handle_break(port)) 823 continue; /* Ignore character */ 824 } 825 826 if (uerstat & S3C2410_UERSTAT_FRAME) 827 port->icount.frame++; 828 if (uerstat & S3C2410_UERSTAT_OVERRUN) 829 port->icount.overrun++; 830 831 uerstat &= port->read_status_mask; 832 833 if (uerstat & S3C2410_UERSTAT_BREAK) 834 flag = TTY_BREAK; 835 else if (uerstat & S3C2410_UERSTAT_PARITY) 836 flag = TTY_PARITY; 837 else if (uerstat & (S3C2410_UERSTAT_FRAME | 838 S3C2410_UERSTAT_OVERRUN)) 839 flag = TTY_FRAME; 840 } 841 842 if (uart_handle_sysrq_char(port, ch)) 843 continue; /* Ignore character */ 844 845 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, 846 ch, flag); 847 } 848 849 tty_flip_buffer_push(&port->state->port); 850 } 851 852 static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id) 853 { 854 struct s3c24xx_uart_port *ourport = dev_id; 855 struct uart_port *port = &ourport->port; 856 857 spin_lock(&port->lock); 858 s3c24xx_serial_rx_drain_fifo(ourport); 859 spin_unlock(&port->lock); 860 861 return IRQ_HANDLED; 862 } 863 864 static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id) 865 { 866 struct s3c24xx_uart_port *ourport = dev_id; 867 868 if (ourport->dma && ourport->dma->rx_chan) 869 return s3c24xx_serial_rx_chars_dma(dev_id); 870 return s3c24xx_serial_rx_chars_pio(dev_id); 871 } 872 873 static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport) 874 { 875 struct uart_port *port = &ourport->port; 876 struct circ_buf *xmit = &port->state->xmit; 877 int count, dma_count = 0; 878 879 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 880 881 if (ourport->dma && ourport->dma->tx_chan && 882 count >= ourport->min_dma_size) { 883 int align = dma_get_cache_alignment() - 884 (xmit->tail & (dma_get_cache_alignment() - 1)); 885 if (count - align >= ourport->min_dma_size) { 886 dma_count = count - align; 887 count = align; 888 } 889 } 890 891 if (port->x_char) { 892 wr_reg(port, S3C2410_UTXH, port->x_char); 893 port->icount.tx++; 894 port->x_char = 0; 895 return; 896 } 897 898 /* if there isn't anything more to transmit, or the uart is now 899 * stopped, disable the uart and exit 900 */ 901 902 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 903 s3c24xx_serial_stop_tx(port); 904 return; 905 } 906 907 /* try and drain the buffer... */ 908 909 if (count > port->fifosize) { 910 count = port->fifosize; 911 dma_count = 0; 912 } 913 914 while (!uart_circ_empty(xmit) && count > 0) { 915 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) 916 break; 917 918 wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]); 919 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 920 port->icount.tx++; 921 count--; 922 } 923 924 if (!count && dma_count) { 925 s3c24xx_serial_start_tx_dma(ourport, dma_count); 926 return; 927 } 928 929 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 930 uart_write_wakeup(port); 931 932 if (uart_circ_empty(xmit)) 933 s3c24xx_serial_stop_tx(port); 934 } 935 936 static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id) 937 { 938 struct s3c24xx_uart_port *ourport = id; 939 struct uart_port *port = &ourport->port; 940 941 spin_lock(&port->lock); 942 943 s3c24xx_serial_tx_chars(ourport); 944 945 spin_unlock(&port->lock); 946 return IRQ_HANDLED; 947 } 948 949 /* interrupt handler for s3c64xx and later SoC's.*/ 950 static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) 951 { 952 const struct s3c24xx_uart_port *ourport = id; 953 const struct uart_port *port = &ourport->port; 954 unsigned int pend = rd_regl(port, S3C64XX_UINTP); 955 irqreturn_t ret = IRQ_HANDLED; 956 957 if (pend & S3C64XX_UINTM_RXD_MSK) { 958 ret = s3c24xx_serial_rx_irq(irq, id); 959 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); 960 } 961 if (pend & S3C64XX_UINTM_TXD_MSK) { 962 ret = s3c24xx_serial_tx_irq(irq, id); 963 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); 964 } 965 return ret; 966 } 967 968 /* interrupt handler for Apple SoC's.*/ 969 static irqreturn_t apple_serial_handle_irq(int irq, void *id) 970 { 971 const struct s3c24xx_uart_port *ourport = id; 972 const struct uart_port *port = &ourport->port; 973 unsigned int pend = rd_regl(port, S3C2410_UTRSTAT); 974 irqreturn_t ret = IRQ_NONE; 975 976 if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) { 977 wr_regl(port, S3C2410_UTRSTAT, 978 APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO); 979 ret = s3c24xx_serial_rx_irq(irq, id); 980 } 981 if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) { 982 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH); 983 ret = s3c24xx_serial_tx_irq(irq, id); 984 } 985 986 return ret; 987 } 988 989 static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) 990 { 991 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 992 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); 993 unsigned long ufcon = rd_regl(port, S3C2410_UFCON); 994 995 if (ufcon & S3C2410_UFCON_FIFOMODE) { 996 if ((ufstat & info->tx_fifomask) != 0 || 997 (ufstat & info->tx_fifofull)) 998 return 0; 999 1000 return 1; 1001 } 1002 1003 return s3c24xx_serial_txempty_nofifo(port); 1004 } 1005 1006 /* no modem control lines */ 1007 static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) 1008 { 1009 unsigned int umstat = rd_reg(port, S3C2410_UMSTAT); 1010 1011 if (umstat & S3C2410_UMSTAT_CTS) 1012 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; 1013 else 1014 return TIOCM_CAR | TIOCM_DSR; 1015 } 1016 1017 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) 1018 { 1019 unsigned int umcon = rd_regl(port, S3C2410_UMCON); 1020 unsigned int ucon = rd_regl(port, S3C2410_UCON); 1021 1022 if (mctrl & TIOCM_RTS) 1023 umcon |= S3C2410_UMCOM_RTS_LOW; 1024 else 1025 umcon &= ~S3C2410_UMCOM_RTS_LOW; 1026 1027 wr_regl(port, S3C2410_UMCON, umcon); 1028 1029 if (mctrl & TIOCM_LOOP) 1030 ucon |= S3C2410_UCON_LOOPBACK; 1031 else 1032 ucon &= ~S3C2410_UCON_LOOPBACK; 1033 1034 wr_regl(port, S3C2410_UCON, ucon); 1035 } 1036 1037 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) 1038 { 1039 unsigned long flags; 1040 unsigned int ucon; 1041 1042 spin_lock_irqsave(&port->lock, flags); 1043 1044 ucon = rd_regl(port, S3C2410_UCON); 1045 1046 if (break_state) 1047 ucon |= S3C2410_UCON_SBREAK; 1048 else 1049 ucon &= ~S3C2410_UCON_SBREAK; 1050 1051 wr_regl(port, S3C2410_UCON, ucon); 1052 1053 spin_unlock_irqrestore(&port->lock, flags); 1054 } 1055 1056 static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p) 1057 { 1058 struct s3c24xx_uart_dma *dma = p->dma; 1059 struct dma_slave_caps dma_caps; 1060 const char *reason = NULL; 1061 int ret; 1062 1063 /* Default slave configuration parameters */ 1064 dma->rx_conf.direction = DMA_DEV_TO_MEM; 1065 dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1066 dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH; 1067 dma->rx_conf.src_maxburst = 1; 1068 1069 dma->tx_conf.direction = DMA_MEM_TO_DEV; 1070 dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1071 dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH; 1072 dma->tx_conf.dst_maxburst = 1; 1073 1074 dma->rx_chan = dma_request_chan(p->port.dev, "rx"); 1075 1076 if (IS_ERR(dma->rx_chan)) { 1077 reason = "DMA RX channel request failed"; 1078 ret = PTR_ERR(dma->rx_chan); 1079 goto err_warn; 1080 } 1081 1082 ret = dma_get_slave_caps(dma->rx_chan, &dma_caps); 1083 if (ret < 0 || 1084 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { 1085 reason = "insufficient DMA RX engine capabilities"; 1086 ret = -EOPNOTSUPP; 1087 goto err_release_rx; 1088 } 1089 1090 dmaengine_slave_config(dma->rx_chan, &dma->rx_conf); 1091 1092 dma->tx_chan = dma_request_chan(p->port.dev, "tx"); 1093 if (IS_ERR(dma->tx_chan)) { 1094 reason = "DMA TX channel request failed"; 1095 ret = PTR_ERR(dma->tx_chan); 1096 goto err_release_rx; 1097 } 1098 1099 ret = dma_get_slave_caps(dma->tx_chan, &dma_caps); 1100 if (ret < 0 || 1101 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) { 1102 reason = "insufficient DMA TX engine capabilities"; 1103 ret = -EOPNOTSUPP; 1104 goto err_release_tx; 1105 } 1106 1107 dmaengine_slave_config(dma->tx_chan, &dma->tx_conf); 1108 1109 /* RX buffer */ 1110 dma->rx_size = PAGE_SIZE; 1111 1112 dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL); 1113 if (!dma->rx_buf) { 1114 ret = -ENOMEM; 1115 goto err_release_tx; 1116 } 1117 1118 dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf, 1119 dma->rx_size, DMA_FROM_DEVICE); 1120 if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) { 1121 reason = "DMA mapping error for RX buffer"; 1122 ret = -EIO; 1123 goto err_free_rx; 1124 } 1125 1126 /* TX buffer */ 1127 dma->tx_addr = dma_map_single(dma->tx_chan->device->dev, 1128 p->port.state->xmit.buf, UART_XMIT_SIZE, 1129 DMA_TO_DEVICE); 1130 if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) { 1131 reason = "DMA mapping error for TX buffer"; 1132 ret = -EIO; 1133 goto err_unmap_rx; 1134 } 1135 1136 return 0; 1137 1138 err_unmap_rx: 1139 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, 1140 dma->rx_size, DMA_FROM_DEVICE); 1141 err_free_rx: 1142 kfree(dma->rx_buf); 1143 err_release_tx: 1144 dma_release_channel(dma->tx_chan); 1145 err_release_rx: 1146 dma_release_channel(dma->rx_chan); 1147 err_warn: 1148 if (reason) 1149 dev_warn(p->port.dev, "%s, DMA will not be used\n", reason); 1150 return ret; 1151 } 1152 1153 static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p) 1154 { 1155 struct s3c24xx_uart_dma *dma = p->dma; 1156 1157 if (dma->rx_chan) { 1158 dmaengine_terminate_all(dma->rx_chan); 1159 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr, 1160 dma->rx_size, DMA_FROM_DEVICE); 1161 kfree(dma->rx_buf); 1162 dma_release_channel(dma->rx_chan); 1163 dma->rx_chan = NULL; 1164 } 1165 1166 if (dma->tx_chan) { 1167 dmaengine_terminate_all(dma->tx_chan); 1168 dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr, 1169 UART_XMIT_SIZE, DMA_TO_DEVICE); 1170 dma_release_channel(dma->tx_chan); 1171 dma->tx_chan = NULL; 1172 } 1173 } 1174 1175 static void s3c24xx_serial_shutdown(struct uart_port *port) 1176 { 1177 struct s3c24xx_uart_port *ourport = to_ourport(port); 1178 1179 if (ourport->tx_claimed) { 1180 free_irq(ourport->tx_irq, ourport); 1181 ourport->tx_enabled = 0; 1182 ourport->tx_claimed = 0; 1183 ourport->tx_mode = 0; 1184 } 1185 1186 if (ourport->rx_claimed) { 1187 free_irq(ourport->rx_irq, ourport); 1188 ourport->rx_claimed = 0; 1189 ourport->rx_enabled = 0; 1190 } 1191 1192 if (ourport->dma) 1193 s3c24xx_serial_release_dma(ourport); 1194 1195 ourport->tx_in_progress = 0; 1196 } 1197 1198 static void s3c64xx_serial_shutdown(struct uart_port *port) 1199 { 1200 struct s3c24xx_uart_port *ourport = to_ourport(port); 1201 1202 ourport->tx_enabled = 0; 1203 ourport->tx_mode = 0; 1204 ourport->rx_enabled = 0; 1205 1206 free_irq(port->irq, ourport); 1207 1208 wr_regl(port, S3C64XX_UINTP, 0xf); 1209 wr_regl(port, S3C64XX_UINTM, 0xf); 1210 1211 if (ourport->dma) 1212 s3c24xx_serial_release_dma(ourport); 1213 1214 ourport->tx_in_progress = 0; 1215 } 1216 1217 static void apple_s5l_serial_shutdown(struct uart_port *port) 1218 { 1219 struct s3c24xx_uart_port *ourport = to_ourport(port); 1220 1221 unsigned int ucon; 1222 1223 ucon = rd_regl(port, S3C2410_UCON); 1224 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 1225 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 1226 APPLE_S5L_UCON_RXTO_ENA_MSK); 1227 wr_regl(port, S3C2410_UCON, ucon); 1228 1229 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 1230 1231 free_irq(port->irq, ourport); 1232 1233 ourport->tx_enabled = 0; 1234 ourport->tx_mode = 0; 1235 ourport->rx_enabled = 0; 1236 1237 if (ourport->dma) 1238 s3c24xx_serial_release_dma(ourport); 1239 1240 ourport->tx_in_progress = 0; 1241 } 1242 1243 static int s3c24xx_serial_startup(struct uart_port *port) 1244 { 1245 struct s3c24xx_uart_port *ourport = to_ourport(port); 1246 int ret; 1247 1248 ourport->rx_enabled = 1; 1249 1250 ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0, 1251 s3c24xx_serial_portname(port), ourport); 1252 1253 if (ret != 0) { 1254 dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); 1255 return ret; 1256 } 1257 1258 ourport->rx_claimed = 1; 1259 1260 dev_dbg(port->dev, "requesting tx irq...\n"); 1261 1262 ourport->tx_enabled = 1; 1263 1264 ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0, 1265 s3c24xx_serial_portname(port), ourport); 1266 1267 if (ret) { 1268 dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); 1269 goto err; 1270 } 1271 1272 ourport->tx_claimed = 1; 1273 1274 /* the port reset code should have done the correct 1275 * register setup for the port controls 1276 */ 1277 1278 return ret; 1279 1280 err: 1281 s3c24xx_serial_shutdown(port); 1282 return ret; 1283 } 1284 1285 static int s3c64xx_serial_startup(struct uart_port *port) 1286 { 1287 struct s3c24xx_uart_port *ourport = to_ourport(port); 1288 unsigned long flags; 1289 unsigned int ufcon; 1290 int ret; 1291 1292 wr_regl(port, S3C64XX_UINTM, 0xf); 1293 if (ourport->dma) { 1294 ret = s3c24xx_serial_request_dma(ourport); 1295 if (ret < 0) { 1296 devm_kfree(port->dev, ourport->dma); 1297 ourport->dma = NULL; 1298 } 1299 } 1300 1301 ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, 1302 s3c24xx_serial_portname(port), ourport); 1303 if (ret) { 1304 dev_err(port->dev, "cannot get irq %d\n", port->irq); 1305 return ret; 1306 } 1307 1308 /* For compatibility with s3c24xx Soc's */ 1309 ourport->rx_enabled = 1; 1310 ourport->tx_enabled = 0; 1311 1312 spin_lock_irqsave(&port->lock, flags); 1313 1314 ufcon = rd_regl(port, S3C2410_UFCON); 1315 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; 1316 if (!uart_console(port)) 1317 ufcon |= S3C2410_UFCON_RESETTX; 1318 wr_regl(port, S3C2410_UFCON, ufcon); 1319 1320 enable_rx_pio(ourport); 1321 1322 spin_unlock_irqrestore(&port->lock, flags); 1323 1324 /* Enable Rx Interrupt */ 1325 s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM); 1326 1327 return ret; 1328 } 1329 1330 static int apple_s5l_serial_startup(struct uart_port *port) 1331 { 1332 struct s3c24xx_uart_port *ourport = to_ourport(port); 1333 unsigned long flags; 1334 unsigned int ufcon; 1335 int ret; 1336 1337 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 1338 1339 ret = request_irq(port->irq, apple_serial_handle_irq, 0, 1340 s3c24xx_serial_portname(port), ourport); 1341 if (ret) { 1342 dev_err(port->dev, "cannot get irq %d\n", port->irq); 1343 return ret; 1344 } 1345 1346 /* For compatibility with s3c24xx Soc's */ 1347 ourport->rx_enabled = 1; 1348 ourport->tx_enabled = 0; 1349 1350 spin_lock_irqsave(&port->lock, flags); 1351 1352 ufcon = rd_regl(port, S3C2410_UFCON); 1353 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8; 1354 if (!uart_console(port)) 1355 ufcon |= S3C2410_UFCON_RESETTX; 1356 wr_regl(port, S3C2410_UFCON, ufcon); 1357 1358 enable_rx_pio(ourport); 1359 1360 spin_unlock_irqrestore(&port->lock, flags); 1361 1362 /* Enable Rx Interrupt */ 1363 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON); 1364 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON); 1365 1366 return ret; 1367 } 1368 1369 /* power power management control */ 1370 1371 static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, 1372 unsigned int old) 1373 { 1374 struct s3c24xx_uart_port *ourport = to_ourport(port); 1375 int timeout = 10000; 1376 1377 ourport->pm_level = level; 1378 1379 switch (level) { 1380 case 3: 1381 while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) 1382 udelay(100); 1383 1384 if (!IS_ERR(ourport->baudclk)) 1385 clk_disable_unprepare(ourport->baudclk); 1386 1387 clk_disable_unprepare(ourport->clk); 1388 break; 1389 1390 case 0: 1391 clk_prepare_enable(ourport->clk); 1392 1393 if (!IS_ERR(ourport->baudclk)) 1394 clk_prepare_enable(ourport->baudclk); 1395 break; 1396 default: 1397 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); 1398 } 1399 } 1400 1401 /* baud rate calculation 1402 * 1403 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number 1404 * of different sources, including the peripheral clock ("pclk") and an 1405 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") 1406 * with a programmable extra divisor. 1407 * 1408 * The following code goes through the clock sources, and calculates the 1409 * baud clocks (and the resultant actual baud rates) and then tries to 1410 * pick the closest one and select that. 1411 * 1412 */ 1413 1414 #define MAX_CLK_NAME_LENGTH 15 1415 1416 static inline int s3c24xx_serial_getsource(struct uart_port *port) 1417 { 1418 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1419 unsigned int ucon; 1420 1421 if (info->num_clks == 1) 1422 return 0; 1423 1424 ucon = rd_regl(port, S3C2410_UCON); 1425 ucon &= info->clksel_mask; 1426 return ucon >> info->clksel_shift; 1427 } 1428 1429 static void s3c24xx_serial_setsource(struct uart_port *port, 1430 unsigned int clk_sel) 1431 { 1432 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1433 unsigned int ucon; 1434 1435 if (info->num_clks == 1) 1436 return; 1437 1438 ucon = rd_regl(port, S3C2410_UCON); 1439 if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) 1440 return; 1441 1442 ucon &= ~info->clksel_mask; 1443 ucon |= clk_sel << info->clksel_shift; 1444 wr_regl(port, S3C2410_UCON, ucon); 1445 } 1446 1447 static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, 1448 unsigned int req_baud, struct clk **best_clk, 1449 unsigned int *clk_num) 1450 { 1451 const struct s3c24xx_uart_info *info = ourport->info; 1452 struct clk *clk; 1453 unsigned long rate; 1454 unsigned int cnt, baud, quot, best_quot = 0; 1455 char clkname[MAX_CLK_NAME_LENGTH]; 1456 int calc_deviation, deviation = (1 << 30) - 1; 1457 1458 for (cnt = 0; cnt < info->num_clks; cnt++) { 1459 /* Keep selected clock if provided */ 1460 if (ourport->cfg->clk_sel && 1461 !(ourport->cfg->clk_sel & (1 << cnt))) 1462 continue; 1463 1464 sprintf(clkname, "clk_uart_baud%d", cnt); 1465 clk = clk_get(ourport->port.dev, clkname); 1466 if (IS_ERR(clk)) 1467 continue; 1468 1469 rate = clk_get_rate(clk); 1470 if (!rate) 1471 continue; 1472 1473 if (ourport->info->has_divslot) { 1474 unsigned long div = rate / req_baud; 1475 1476 /* The UDIVSLOT register on the newer UARTs allows us to 1477 * get a divisor adjustment of 1/16th on the baud clock. 1478 * 1479 * We don't keep the UDIVSLOT value (the 16ths we 1480 * calculated by not multiplying the baud by 16) as it 1481 * is easy enough to recalculate. 1482 */ 1483 1484 quot = div / 16; 1485 baud = rate / div; 1486 } else { 1487 quot = (rate + (8 * req_baud)) / (16 * req_baud); 1488 baud = rate / (quot * 16); 1489 } 1490 quot--; 1491 1492 calc_deviation = req_baud - baud; 1493 if (calc_deviation < 0) 1494 calc_deviation = -calc_deviation; 1495 1496 if (calc_deviation < deviation) { 1497 *best_clk = clk; 1498 best_quot = quot; 1499 *clk_num = cnt; 1500 deviation = calc_deviation; 1501 } 1502 } 1503 1504 return best_quot; 1505 } 1506 1507 /* udivslot_table[] 1508 * 1509 * This table takes the fractional value of the baud divisor and gives 1510 * the recommended setting for the UDIVSLOT register. 1511 */ 1512 static const u16 udivslot_table[16] = { 1513 [0] = 0x0000, 1514 [1] = 0x0080, 1515 [2] = 0x0808, 1516 [3] = 0x0888, 1517 [4] = 0x2222, 1518 [5] = 0x4924, 1519 [6] = 0x4A52, 1520 [7] = 0x54AA, 1521 [8] = 0x5555, 1522 [9] = 0xD555, 1523 [10] = 0xD5D5, 1524 [11] = 0xDDD5, 1525 [12] = 0xDDDD, 1526 [13] = 0xDFDD, 1527 [14] = 0xDFDF, 1528 [15] = 0xFFDF, 1529 }; 1530 1531 static void s3c24xx_serial_set_termios(struct uart_port *port, 1532 struct ktermios *termios, 1533 const struct ktermios *old) 1534 { 1535 const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); 1536 struct s3c24xx_uart_port *ourport = to_ourport(port); 1537 struct clk *clk = ERR_PTR(-EINVAL); 1538 unsigned long flags; 1539 unsigned int baud, quot, clk_sel = 0; 1540 unsigned int ulcon; 1541 unsigned int umcon; 1542 unsigned int udivslot = 0; 1543 1544 /* 1545 * We don't support modem control lines. 1546 */ 1547 termios->c_cflag &= ~(HUPCL | CMSPAR); 1548 termios->c_cflag |= CLOCAL; 1549 1550 /* 1551 * Ask the core to calculate the divisor for us. 1552 */ 1553 1554 baud = uart_get_baud_rate(port, termios, old, 0, 3000000); 1555 quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); 1556 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) 1557 quot = port->custom_divisor; 1558 if (IS_ERR(clk)) 1559 return; 1560 1561 /* check to see if we need to change clock source */ 1562 1563 if (ourport->baudclk != clk) { 1564 clk_prepare_enable(clk); 1565 1566 s3c24xx_serial_setsource(port, clk_sel); 1567 1568 if (!IS_ERR(ourport->baudclk)) { 1569 clk_disable_unprepare(ourport->baudclk); 1570 ourport->baudclk = ERR_PTR(-EINVAL); 1571 } 1572 1573 ourport->baudclk = clk; 1574 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; 1575 } 1576 1577 if (ourport->info->has_divslot) { 1578 unsigned int div = ourport->baudclk_rate / baud; 1579 1580 if (cfg->has_fracval) { 1581 udivslot = (div & 15); 1582 dev_dbg(port->dev, "fracval = %04x\n", udivslot); 1583 } else { 1584 udivslot = udivslot_table[div & 15]; 1585 dev_dbg(port->dev, "udivslot = %04x (div %d)\n", 1586 udivslot, div & 15); 1587 } 1588 } 1589 1590 switch (termios->c_cflag & CSIZE) { 1591 case CS5: 1592 dev_dbg(port->dev, "config: 5bits/char\n"); 1593 ulcon = S3C2410_LCON_CS5; 1594 break; 1595 case CS6: 1596 dev_dbg(port->dev, "config: 6bits/char\n"); 1597 ulcon = S3C2410_LCON_CS6; 1598 break; 1599 case CS7: 1600 dev_dbg(port->dev, "config: 7bits/char\n"); 1601 ulcon = S3C2410_LCON_CS7; 1602 break; 1603 case CS8: 1604 default: 1605 dev_dbg(port->dev, "config: 8bits/char\n"); 1606 ulcon = S3C2410_LCON_CS8; 1607 break; 1608 } 1609 1610 /* preserve original lcon IR settings */ 1611 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); 1612 1613 if (termios->c_cflag & CSTOPB) 1614 ulcon |= S3C2410_LCON_STOPB; 1615 1616 if (termios->c_cflag & PARENB) { 1617 if (termios->c_cflag & PARODD) 1618 ulcon |= S3C2410_LCON_PODD; 1619 else 1620 ulcon |= S3C2410_LCON_PEVEN; 1621 } else { 1622 ulcon |= S3C2410_LCON_PNONE; 1623 } 1624 1625 spin_lock_irqsave(&port->lock, flags); 1626 1627 dev_dbg(port->dev, 1628 "setting ulcon to %08x, brddiv to %d, udivslot %08x\n", 1629 ulcon, quot, udivslot); 1630 1631 wr_regl(port, S3C2410_ULCON, ulcon); 1632 wr_regl(port, S3C2410_UBRDIV, quot); 1633 1634 port->status &= ~UPSTAT_AUTOCTS; 1635 1636 umcon = rd_regl(port, S3C2410_UMCON); 1637 if (termios->c_cflag & CRTSCTS) { 1638 umcon |= S3C2410_UMCOM_AFC; 1639 /* Disable RTS when RX FIFO contains 63 bytes */ 1640 umcon &= ~S3C2412_UMCON_AFC_8; 1641 port->status = UPSTAT_AUTOCTS; 1642 } else { 1643 umcon &= ~S3C2410_UMCOM_AFC; 1644 } 1645 wr_regl(port, S3C2410_UMCON, umcon); 1646 1647 if (ourport->info->has_divslot) 1648 wr_regl(port, S3C2443_DIVSLOT, udivslot); 1649 1650 dev_dbg(port->dev, 1651 "uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", 1652 rd_regl(port, S3C2410_ULCON), 1653 rd_regl(port, S3C2410_UCON), 1654 rd_regl(port, S3C2410_UFCON)); 1655 1656 /* 1657 * Update the per-port timeout. 1658 */ 1659 uart_update_timeout(port, termios->c_cflag, baud); 1660 1661 /* 1662 * Which character status flags are we interested in? 1663 */ 1664 port->read_status_mask = S3C2410_UERSTAT_OVERRUN; 1665 if (termios->c_iflag & INPCK) 1666 port->read_status_mask |= S3C2410_UERSTAT_FRAME | 1667 S3C2410_UERSTAT_PARITY; 1668 /* 1669 * Which character status flags should we ignore? 1670 */ 1671 port->ignore_status_mask = 0; 1672 if (termios->c_iflag & IGNPAR) 1673 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; 1674 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) 1675 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; 1676 1677 /* 1678 * Ignore all characters if CREAD is not set. 1679 */ 1680 if ((termios->c_cflag & CREAD) == 0) 1681 port->ignore_status_mask |= RXSTAT_DUMMY_READ; 1682 1683 spin_unlock_irqrestore(&port->lock, flags); 1684 } 1685 1686 static const char *s3c24xx_serial_type(struct uart_port *port) 1687 { 1688 const struct s3c24xx_uart_port *ourport = to_ourport(port); 1689 1690 switch (ourport->info->type) { 1691 case TYPE_S3C24XX: 1692 return "S3C24XX"; 1693 case TYPE_S3C6400: 1694 return "S3C6400/10"; 1695 case TYPE_APPLE_S5L: 1696 return "APPLE S5L"; 1697 default: 1698 return NULL; 1699 } 1700 } 1701 1702 static void s3c24xx_serial_config_port(struct uart_port *port, int flags) 1703 { 1704 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1705 1706 if (flags & UART_CONFIG_TYPE) 1707 port->type = info->port_type; 1708 } 1709 1710 /* 1711 * verify the new serial_struct (for TIOCSSERIAL). 1712 */ 1713 static int 1714 s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) 1715 { 1716 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1717 1718 if (ser->type != PORT_UNKNOWN && ser->type != info->port_type) 1719 return -EINVAL; 1720 1721 return 0; 1722 } 1723 1724 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 1725 1726 static struct console s3c24xx_serial_console; 1727 1728 static void __init s3c24xx_serial_register_console(void) 1729 { 1730 register_console(&s3c24xx_serial_console); 1731 } 1732 1733 static void s3c24xx_serial_unregister_console(void) 1734 { 1735 if (console_is_registered(&s3c24xx_serial_console)) 1736 unregister_console(&s3c24xx_serial_console); 1737 } 1738 1739 #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console 1740 #else 1741 static inline void s3c24xx_serial_register_console(void) { } 1742 static inline void s3c24xx_serial_unregister_console(void) { } 1743 #define S3C24XX_SERIAL_CONSOLE NULL 1744 #endif 1745 1746 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1747 static int s3c24xx_serial_get_poll_char(struct uart_port *port); 1748 static void s3c24xx_serial_put_poll_char(struct uart_port *port, 1749 unsigned char c); 1750 #endif 1751 1752 static const struct uart_ops s3c24xx_serial_ops = { 1753 .pm = s3c24xx_serial_pm, 1754 .tx_empty = s3c24xx_serial_tx_empty, 1755 .get_mctrl = s3c24xx_serial_get_mctrl, 1756 .set_mctrl = s3c24xx_serial_set_mctrl, 1757 .stop_tx = s3c24xx_serial_stop_tx, 1758 .start_tx = s3c24xx_serial_start_tx, 1759 .stop_rx = s3c24xx_serial_stop_rx, 1760 .break_ctl = s3c24xx_serial_break_ctl, 1761 .startup = s3c24xx_serial_startup, 1762 .shutdown = s3c24xx_serial_shutdown, 1763 .set_termios = s3c24xx_serial_set_termios, 1764 .type = s3c24xx_serial_type, 1765 .config_port = s3c24xx_serial_config_port, 1766 .verify_port = s3c24xx_serial_verify_port, 1767 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1768 .poll_get_char = s3c24xx_serial_get_poll_char, 1769 .poll_put_char = s3c24xx_serial_put_poll_char, 1770 #endif 1771 }; 1772 1773 static const struct uart_ops s3c64xx_serial_ops = { 1774 .pm = s3c24xx_serial_pm, 1775 .tx_empty = s3c24xx_serial_tx_empty, 1776 .get_mctrl = s3c24xx_serial_get_mctrl, 1777 .set_mctrl = s3c24xx_serial_set_mctrl, 1778 .stop_tx = s3c24xx_serial_stop_tx, 1779 .start_tx = s3c24xx_serial_start_tx, 1780 .stop_rx = s3c24xx_serial_stop_rx, 1781 .break_ctl = s3c24xx_serial_break_ctl, 1782 .startup = s3c64xx_serial_startup, 1783 .shutdown = s3c64xx_serial_shutdown, 1784 .set_termios = s3c24xx_serial_set_termios, 1785 .type = s3c24xx_serial_type, 1786 .config_port = s3c24xx_serial_config_port, 1787 .verify_port = s3c24xx_serial_verify_port, 1788 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1789 .poll_get_char = s3c24xx_serial_get_poll_char, 1790 .poll_put_char = s3c24xx_serial_put_poll_char, 1791 #endif 1792 }; 1793 1794 static const struct uart_ops apple_s5l_serial_ops = { 1795 .pm = s3c24xx_serial_pm, 1796 .tx_empty = s3c24xx_serial_tx_empty, 1797 .get_mctrl = s3c24xx_serial_get_mctrl, 1798 .set_mctrl = s3c24xx_serial_set_mctrl, 1799 .stop_tx = s3c24xx_serial_stop_tx, 1800 .start_tx = s3c24xx_serial_start_tx, 1801 .stop_rx = s3c24xx_serial_stop_rx, 1802 .break_ctl = s3c24xx_serial_break_ctl, 1803 .startup = apple_s5l_serial_startup, 1804 .shutdown = apple_s5l_serial_shutdown, 1805 .set_termios = s3c24xx_serial_set_termios, 1806 .type = s3c24xx_serial_type, 1807 .config_port = s3c24xx_serial_config_port, 1808 .verify_port = s3c24xx_serial_verify_port, 1809 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL) 1810 .poll_get_char = s3c24xx_serial_get_poll_char, 1811 .poll_put_char = s3c24xx_serial_put_poll_char, 1812 #endif 1813 }; 1814 1815 static struct uart_driver s3c24xx_uart_drv = { 1816 .owner = THIS_MODULE, 1817 .driver_name = "s3c2410_serial", 1818 .nr = UART_NR, 1819 .cons = S3C24XX_SERIAL_CONSOLE, 1820 .dev_name = S3C24XX_SERIAL_NAME, 1821 .major = S3C24XX_SERIAL_MAJOR, 1822 .minor = S3C24XX_SERIAL_MINOR, 1823 }; 1824 1825 static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR]; 1826 1827 static void s3c24xx_serial_init_port_default(int index) { 1828 struct uart_port *port = &s3c24xx_serial_ports[index].port; 1829 1830 spin_lock_init(&port->lock); 1831 1832 port->iotype = UPIO_MEM; 1833 port->uartclk = 0; 1834 port->fifosize = 16; 1835 port->ops = &s3c24xx_serial_ops; 1836 port->flags = UPF_BOOT_AUTOCONF; 1837 port->line = index; 1838 } 1839 1840 /* s3c24xx_serial_resetport 1841 * 1842 * reset the fifos and other the settings. 1843 */ 1844 1845 static void s3c24xx_serial_resetport(struct uart_port *port, 1846 const struct s3c2410_uartcfg *cfg) 1847 { 1848 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 1849 unsigned long ucon = rd_regl(port, S3C2410_UCON); 1850 1851 ucon &= (info->clksel_mask | info->ucon_mask); 1852 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); 1853 1854 /* reset both fifos */ 1855 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); 1856 wr_regl(port, S3C2410_UFCON, cfg->ufcon); 1857 1858 /* some delay is required after fifo reset */ 1859 udelay(1); 1860 } 1861 1862 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ 1863 1864 static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, 1865 unsigned long val, void *data) 1866 { 1867 struct s3c24xx_uart_port *port; 1868 struct uart_port *uport; 1869 1870 port = container_of(nb, struct s3c24xx_uart_port, freq_transition); 1871 uport = &port->port; 1872 1873 /* check to see if port is enabled */ 1874 1875 if (port->pm_level != 0) 1876 return 0; 1877 1878 /* try and work out if the baudrate is changing, we can detect 1879 * a change in rate, but we do not have support for detecting 1880 * a disturbance in the clock-rate over the change. 1881 */ 1882 1883 if (IS_ERR(port->baudclk)) 1884 goto exit; 1885 1886 if (port->baudclk_rate == clk_get_rate(port->baudclk)) 1887 goto exit; 1888 1889 if (val == CPUFREQ_PRECHANGE) { 1890 /* we should really shut the port down whilst the 1891 * frequency change is in progress. 1892 */ 1893 1894 } else if (val == CPUFREQ_POSTCHANGE) { 1895 struct ktermios *termios; 1896 struct tty_struct *tty; 1897 1898 if (uport->state == NULL) 1899 goto exit; 1900 1901 tty = uport->state->port.tty; 1902 1903 if (tty == NULL) 1904 goto exit; 1905 1906 termios = &tty->termios; 1907 1908 if (termios == NULL) { 1909 dev_warn(uport->dev, "%s: no termios?\n", __func__); 1910 goto exit; 1911 } 1912 1913 s3c24xx_serial_set_termios(uport, termios, NULL); 1914 } 1915 1916 exit: 1917 return 0; 1918 } 1919 1920 static inline int 1921 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) 1922 { 1923 port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; 1924 1925 return cpufreq_register_notifier(&port->freq_transition, 1926 CPUFREQ_TRANSITION_NOTIFIER); 1927 } 1928 1929 static inline void 1930 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) 1931 { 1932 cpufreq_unregister_notifier(&port->freq_transition, 1933 CPUFREQ_TRANSITION_NOTIFIER); 1934 } 1935 1936 #else 1937 static inline int 1938 s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) 1939 { 1940 return 0; 1941 } 1942 1943 static inline void 1944 s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) 1945 { 1946 } 1947 #endif 1948 1949 static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport) 1950 { 1951 struct device *dev = ourport->port.dev; 1952 const struct s3c24xx_uart_info *info = ourport->info; 1953 char clk_name[MAX_CLK_NAME_LENGTH]; 1954 unsigned int clk_sel; 1955 struct clk *clk; 1956 int clk_num; 1957 int ret; 1958 1959 clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel; 1960 for (clk_num = 0; clk_num < info->num_clks; clk_num++) { 1961 if (!(clk_sel & (1 << clk_num))) 1962 continue; 1963 1964 sprintf(clk_name, "clk_uart_baud%d", clk_num); 1965 clk = clk_get(dev, clk_name); 1966 if (IS_ERR(clk)) 1967 continue; 1968 1969 ret = clk_prepare_enable(clk); 1970 if (ret) { 1971 clk_put(clk); 1972 continue; 1973 } 1974 1975 ourport->baudclk = clk; 1976 ourport->baudclk_rate = clk_get_rate(clk); 1977 s3c24xx_serial_setsource(&ourport->port, clk_num); 1978 1979 return 0; 1980 } 1981 1982 return -EINVAL; 1983 } 1984 1985 /* s3c24xx_serial_init_port 1986 * 1987 * initialise a single serial port from the platform device given 1988 */ 1989 1990 static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, 1991 struct platform_device *platdev) 1992 { 1993 struct uart_port *port = &ourport->port; 1994 const struct s3c2410_uartcfg *cfg = ourport->cfg; 1995 struct resource *res; 1996 int ret; 1997 1998 if (platdev == NULL) 1999 return -ENODEV; 2000 2001 if (port->mapbase != 0) 2002 return -EINVAL; 2003 2004 /* setup info for port */ 2005 port->dev = &platdev->dev; 2006 2007 port->uartclk = 1; 2008 2009 if (cfg->uart_flags & UPF_CONS_FLOW) { 2010 dev_dbg(port->dev, "enabling flow control\n"); 2011 port->flags |= UPF_CONS_FLOW; 2012 } 2013 2014 /* sort our the physical and virtual addresses for each UART */ 2015 2016 res = platform_get_resource(platdev, IORESOURCE_MEM, 0); 2017 if (res == NULL) { 2018 dev_err(port->dev, "failed to find memory resource for uart\n"); 2019 return -EINVAL; 2020 } 2021 2022 dev_dbg(port->dev, "resource %pR)\n", res); 2023 2024 port->membase = devm_ioremap_resource(port->dev, res); 2025 if (IS_ERR(port->membase)) { 2026 dev_err(port->dev, "failed to remap controller address\n"); 2027 return -EBUSY; 2028 } 2029 2030 port->mapbase = res->start; 2031 ret = platform_get_irq(platdev, 0); 2032 if (ret < 0) { 2033 port->irq = 0; 2034 } else { 2035 port->irq = ret; 2036 ourport->rx_irq = ret; 2037 ourport->tx_irq = ret + 1; 2038 } 2039 2040 switch (ourport->info->type) { 2041 case TYPE_S3C24XX: 2042 ret = platform_get_irq(platdev, 1); 2043 if (ret > 0) 2044 ourport->tx_irq = ret; 2045 break; 2046 default: 2047 break; 2048 } 2049 2050 /* 2051 * DMA is currently supported only on DT platforms, if DMA properties 2052 * are specified. 2053 */ 2054 if (platdev->dev.of_node && of_find_property(platdev->dev.of_node, 2055 "dmas", NULL)) { 2056 ourport->dma = devm_kzalloc(port->dev, 2057 sizeof(*ourport->dma), 2058 GFP_KERNEL); 2059 if (!ourport->dma) { 2060 ret = -ENOMEM; 2061 goto err; 2062 } 2063 } 2064 2065 ourport->clk = clk_get(&platdev->dev, "uart"); 2066 if (IS_ERR(ourport->clk)) { 2067 pr_err("%s: Controller clock not found\n", 2068 dev_name(&platdev->dev)); 2069 ret = PTR_ERR(ourport->clk); 2070 goto err; 2071 } 2072 2073 ret = clk_prepare_enable(ourport->clk); 2074 if (ret) { 2075 pr_err("uart: clock failed to prepare+enable: %d\n", ret); 2076 clk_put(ourport->clk); 2077 goto err; 2078 } 2079 2080 ret = s3c24xx_serial_enable_baudclk(ourport); 2081 if (ret) 2082 pr_warn("uart: failed to enable baudclk\n"); 2083 2084 /* Keep all interrupts masked and cleared */ 2085 switch (ourport->info->type) { 2086 case TYPE_S3C6400: 2087 wr_regl(port, S3C64XX_UINTM, 0xf); 2088 wr_regl(port, S3C64XX_UINTP, 0xf); 2089 wr_regl(port, S3C64XX_UINTSP, 0xf); 2090 break; 2091 case TYPE_APPLE_S5L: { 2092 unsigned int ucon; 2093 2094 ucon = rd_regl(port, S3C2410_UCON); 2095 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 2096 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2097 APPLE_S5L_UCON_RXTO_ENA_MSK); 2098 wr_regl(port, S3C2410_UCON, ucon); 2099 2100 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS); 2101 break; 2102 } 2103 default: 2104 break; 2105 } 2106 2107 dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n", 2108 &port->mapbase, port->membase, port->irq, 2109 ourport->rx_irq, ourport->tx_irq, port->uartclk); 2110 2111 /* reset the fifos (and setup the uart) */ 2112 s3c24xx_serial_resetport(port, cfg); 2113 2114 return 0; 2115 2116 err: 2117 port->mapbase = 0; 2118 return ret; 2119 } 2120 2121 /* Device driver serial port probe */ 2122 2123 static int probe_index; 2124 2125 static inline const struct s3c24xx_serial_drv_data * 2126 s3c24xx_get_driver_data(struct platform_device *pdev) 2127 { 2128 if (dev_of_node(&pdev->dev)) 2129 return of_device_get_match_data(&pdev->dev); 2130 2131 return (struct s3c24xx_serial_drv_data *) 2132 platform_get_device_id(pdev)->driver_data; 2133 } 2134 2135 static int s3c24xx_serial_probe(struct platform_device *pdev) 2136 { 2137 struct device_node *np = pdev->dev.of_node; 2138 struct s3c24xx_uart_port *ourport; 2139 int index = probe_index; 2140 int ret, prop = 0; 2141 2142 if (np) { 2143 ret = of_alias_get_id(np, "serial"); 2144 if (ret >= 0) 2145 index = ret; 2146 } 2147 2148 if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) { 2149 dev_err(&pdev->dev, "serial%d out of range\n", index); 2150 return -EINVAL; 2151 } 2152 ourport = &s3c24xx_serial_ports[index]; 2153 2154 s3c24xx_serial_init_port_default(index); 2155 2156 ourport->drv_data = s3c24xx_get_driver_data(pdev); 2157 if (!ourport->drv_data) { 2158 dev_err(&pdev->dev, "could not find driver data\n"); 2159 return -ENODEV; 2160 } 2161 2162 ourport->baudclk = ERR_PTR(-EINVAL); 2163 ourport->info = &ourport->drv_data->info; 2164 ourport->cfg = (dev_get_platdata(&pdev->dev)) ? 2165 dev_get_platdata(&pdev->dev) : 2166 &ourport->drv_data->def_cfg; 2167 2168 switch (ourport->info->type) { 2169 case TYPE_S3C24XX: 2170 ourport->port.ops = &s3c24xx_serial_ops; 2171 break; 2172 case TYPE_S3C6400: 2173 ourport->port.ops = &s3c64xx_serial_ops; 2174 break; 2175 case TYPE_APPLE_S5L: 2176 ourport->port.ops = &apple_s5l_serial_ops; 2177 break; 2178 } 2179 2180 if (np) { 2181 of_property_read_u32(np, 2182 "samsung,uart-fifosize", &ourport->port.fifosize); 2183 2184 if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { 2185 switch (prop) { 2186 case 1: 2187 ourport->port.iotype = UPIO_MEM; 2188 break; 2189 case 4: 2190 ourport->port.iotype = UPIO_MEM32; 2191 break; 2192 default: 2193 dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n", 2194 prop); 2195 return -EINVAL; 2196 } 2197 } 2198 } 2199 2200 if (ourport->drv_data->fifosize[index]) 2201 ourport->port.fifosize = ourport->drv_data->fifosize[index]; 2202 else if (ourport->info->fifosize) 2203 ourport->port.fifosize = ourport->info->fifosize; 2204 ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE); 2205 2206 /* 2207 * DMA transfers must be aligned at least to cache line size, 2208 * so find minimal transfer size suitable for DMA mode 2209 */ 2210 ourport->min_dma_size = max_t(int, ourport->port.fifosize, 2211 dma_get_cache_alignment()); 2212 2213 dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport); 2214 2215 ret = s3c24xx_serial_init_port(ourport, pdev); 2216 if (ret < 0) 2217 return ret; 2218 2219 if (!s3c24xx_uart_drv.state) { 2220 ret = uart_register_driver(&s3c24xx_uart_drv); 2221 if (ret < 0) { 2222 pr_err("Failed to register Samsung UART driver\n"); 2223 return ret; 2224 } 2225 } 2226 2227 dev_dbg(&pdev->dev, "%s: adding port\n", __func__); 2228 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); 2229 platform_set_drvdata(pdev, &ourport->port); 2230 2231 /* 2232 * Deactivate the clock enabled in s3c24xx_serial_init_port here, 2233 * so that a potential re-enablement through the pm-callback overlaps 2234 * and keeps the clock enabled in this case. 2235 */ 2236 clk_disable_unprepare(ourport->clk); 2237 if (!IS_ERR(ourport->baudclk)) 2238 clk_disable_unprepare(ourport->baudclk); 2239 2240 ret = s3c24xx_serial_cpufreq_register(ourport); 2241 if (ret < 0) 2242 dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); 2243 2244 probe_index++; 2245 2246 return 0; 2247 } 2248 2249 static int s3c24xx_serial_remove(struct platform_device *dev) 2250 { 2251 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); 2252 2253 if (port) { 2254 s3c24xx_serial_cpufreq_deregister(to_ourport(port)); 2255 uart_remove_one_port(&s3c24xx_uart_drv, port); 2256 } 2257 2258 uart_unregister_driver(&s3c24xx_uart_drv); 2259 2260 return 0; 2261 } 2262 2263 /* UART power management code */ 2264 #ifdef CONFIG_PM_SLEEP 2265 static int s3c24xx_serial_suspend(struct device *dev) 2266 { 2267 struct uart_port *port = s3c24xx_dev_to_port(dev); 2268 2269 if (port) 2270 uart_suspend_port(&s3c24xx_uart_drv, port); 2271 2272 return 0; 2273 } 2274 2275 static int s3c24xx_serial_resume(struct device *dev) 2276 { 2277 struct uart_port *port = s3c24xx_dev_to_port(dev); 2278 struct s3c24xx_uart_port *ourport = to_ourport(port); 2279 2280 if (port) { 2281 clk_prepare_enable(ourport->clk); 2282 if (!IS_ERR(ourport->baudclk)) 2283 clk_prepare_enable(ourport->baudclk); 2284 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); 2285 if (!IS_ERR(ourport->baudclk)) 2286 clk_disable_unprepare(ourport->baudclk); 2287 clk_disable_unprepare(ourport->clk); 2288 2289 uart_resume_port(&s3c24xx_uart_drv, port); 2290 } 2291 2292 return 0; 2293 } 2294 2295 static int s3c24xx_serial_resume_noirq(struct device *dev) 2296 { 2297 struct uart_port *port = s3c24xx_dev_to_port(dev); 2298 struct s3c24xx_uart_port *ourport = to_ourport(port); 2299 2300 if (port) { 2301 /* restore IRQ mask */ 2302 switch (ourport->info->type) { 2303 case TYPE_S3C6400: { 2304 unsigned int uintm = 0xf; 2305 2306 if (ourport->tx_enabled) 2307 uintm &= ~S3C64XX_UINTM_TXD_MSK; 2308 if (ourport->rx_enabled) 2309 uintm &= ~S3C64XX_UINTM_RXD_MSK; 2310 clk_prepare_enable(ourport->clk); 2311 if (!IS_ERR(ourport->baudclk)) 2312 clk_prepare_enable(ourport->baudclk); 2313 wr_regl(port, S3C64XX_UINTM, uintm); 2314 if (!IS_ERR(ourport->baudclk)) 2315 clk_disable_unprepare(ourport->baudclk); 2316 clk_disable_unprepare(ourport->clk); 2317 break; 2318 } 2319 case TYPE_APPLE_S5L: { 2320 unsigned int ucon; 2321 int ret; 2322 2323 ret = clk_prepare_enable(ourport->clk); 2324 if (ret) { 2325 dev_err(dev, "clk_enable clk failed: %d\n", ret); 2326 return ret; 2327 } 2328 if (!IS_ERR(ourport->baudclk)) { 2329 ret = clk_prepare_enable(ourport->baudclk); 2330 if (ret) { 2331 dev_err(dev, "clk_enable baudclk failed: %d\n", ret); 2332 clk_disable_unprepare(ourport->clk); 2333 return ret; 2334 } 2335 } 2336 2337 ucon = rd_regl(port, S3C2410_UCON); 2338 2339 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK | 2340 APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2341 APPLE_S5L_UCON_RXTO_ENA_MSK); 2342 2343 if (ourport->tx_enabled) 2344 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK; 2345 if (ourport->rx_enabled) 2346 ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK | 2347 APPLE_S5L_UCON_RXTO_ENA_MSK; 2348 2349 wr_regl(port, S3C2410_UCON, ucon); 2350 2351 if (!IS_ERR(ourport->baudclk)) 2352 clk_disable_unprepare(ourport->baudclk); 2353 clk_disable_unprepare(ourport->clk); 2354 break; 2355 } 2356 default: 2357 break; 2358 } 2359 } 2360 2361 return 0; 2362 } 2363 2364 static const struct dev_pm_ops s3c24xx_serial_pm_ops = { 2365 .suspend = s3c24xx_serial_suspend, 2366 .resume = s3c24xx_serial_resume, 2367 .resume_noirq = s3c24xx_serial_resume_noirq, 2368 }; 2369 #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) 2370 2371 #else /* !CONFIG_PM_SLEEP */ 2372 2373 #define SERIAL_SAMSUNG_PM_OPS NULL 2374 #endif /* CONFIG_PM_SLEEP */ 2375 2376 /* Console code */ 2377 2378 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 2379 2380 static struct uart_port *cons_uart; 2381 2382 static int 2383 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) 2384 { 2385 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); 2386 unsigned long ufstat, utrstat; 2387 2388 if (ufcon & S3C2410_UFCON_FIFOMODE) { 2389 /* fifo mode - check amount of data in fifo registers... */ 2390 2391 ufstat = rd_regl(port, S3C2410_UFSTAT); 2392 return (ufstat & info->tx_fifofull) ? 0 : 1; 2393 } 2394 2395 /* in non-fifo mode, we go and use the tx buffer empty */ 2396 2397 utrstat = rd_regl(port, S3C2410_UTRSTAT); 2398 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; 2399 } 2400 2401 static bool 2402 s3c24xx_port_configured(unsigned int ucon) 2403 { 2404 /* consider the serial port configured if the tx/rx mode set */ 2405 return (ucon & 0xf) != 0; 2406 } 2407 2408 #ifdef CONFIG_CONSOLE_POLL 2409 /* 2410 * Console polling routines for writing and reading from the uart while 2411 * in an interrupt or debug context. 2412 */ 2413 2414 static int s3c24xx_serial_get_poll_char(struct uart_port *port) 2415 { 2416 const struct s3c24xx_uart_port *ourport = to_ourport(port); 2417 unsigned int ufstat; 2418 2419 ufstat = rd_regl(port, S3C2410_UFSTAT); 2420 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) 2421 return NO_POLL_CHAR; 2422 2423 return rd_reg(port, S3C2410_URXH); 2424 } 2425 2426 static void s3c24xx_serial_put_poll_char(struct uart_port *port, 2427 unsigned char c) 2428 { 2429 unsigned int ufcon = rd_regl(port, S3C2410_UFCON); 2430 unsigned int ucon = rd_regl(port, S3C2410_UCON); 2431 2432 /* not possible to xmit on unconfigured port */ 2433 if (!s3c24xx_port_configured(ucon)) 2434 return; 2435 2436 while (!s3c24xx_serial_console_txrdy(port, ufcon)) 2437 cpu_relax(); 2438 wr_reg(port, S3C2410_UTXH, c); 2439 } 2440 2441 #endif /* CONFIG_CONSOLE_POLL */ 2442 2443 static void 2444 s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch) 2445 { 2446 unsigned int ufcon = rd_regl(port, S3C2410_UFCON); 2447 2448 while (!s3c24xx_serial_console_txrdy(port, ufcon)) 2449 cpu_relax(); 2450 wr_reg(port, S3C2410_UTXH, ch); 2451 } 2452 2453 static void 2454 s3c24xx_serial_console_write(struct console *co, const char *s, 2455 unsigned int count) 2456 { 2457 unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON); 2458 unsigned long flags; 2459 bool locked = true; 2460 2461 /* not possible to xmit on unconfigured port */ 2462 if (!s3c24xx_port_configured(ucon)) 2463 return; 2464 2465 if (cons_uart->sysrq) 2466 locked = false; 2467 else if (oops_in_progress) 2468 locked = spin_trylock_irqsave(&cons_uart->lock, flags); 2469 else 2470 spin_lock_irqsave(&cons_uart->lock, flags); 2471 2472 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); 2473 2474 if (locked) 2475 spin_unlock_irqrestore(&cons_uart->lock, flags); 2476 } 2477 2478 /* Shouldn't be __init, as it can be instantiated from other module */ 2479 static void 2480 s3c24xx_serial_get_options(struct uart_port *port, int *baud, 2481 int *parity, int *bits) 2482 { 2483 struct clk *clk; 2484 unsigned int ulcon; 2485 unsigned int ucon; 2486 unsigned int ubrdiv; 2487 unsigned long rate; 2488 unsigned int clk_sel; 2489 char clk_name[MAX_CLK_NAME_LENGTH]; 2490 2491 ulcon = rd_regl(port, S3C2410_ULCON); 2492 ucon = rd_regl(port, S3C2410_UCON); 2493 ubrdiv = rd_regl(port, S3C2410_UBRDIV); 2494 2495 if (s3c24xx_port_configured(ucon)) { 2496 switch (ulcon & S3C2410_LCON_CSMASK) { 2497 case S3C2410_LCON_CS5: 2498 *bits = 5; 2499 break; 2500 case S3C2410_LCON_CS6: 2501 *bits = 6; 2502 break; 2503 case S3C2410_LCON_CS7: 2504 *bits = 7; 2505 break; 2506 case S3C2410_LCON_CS8: 2507 default: 2508 *bits = 8; 2509 break; 2510 } 2511 2512 switch (ulcon & S3C2410_LCON_PMASK) { 2513 case S3C2410_LCON_PEVEN: 2514 *parity = 'e'; 2515 break; 2516 2517 case S3C2410_LCON_PODD: 2518 *parity = 'o'; 2519 break; 2520 2521 case S3C2410_LCON_PNONE: 2522 default: 2523 *parity = 'n'; 2524 } 2525 2526 /* now calculate the baud rate */ 2527 2528 clk_sel = s3c24xx_serial_getsource(port); 2529 sprintf(clk_name, "clk_uart_baud%d", clk_sel); 2530 2531 clk = clk_get(port->dev, clk_name); 2532 if (!IS_ERR(clk)) 2533 rate = clk_get_rate(clk); 2534 else 2535 rate = 1; 2536 2537 *baud = rate / (16 * (ubrdiv + 1)); 2538 dev_dbg(port->dev, "calculated baud %d\n", *baud); 2539 } 2540 } 2541 2542 /* Shouldn't be __init, as it can be instantiated from other module */ 2543 static int 2544 s3c24xx_serial_console_setup(struct console *co, char *options) 2545 { 2546 struct uart_port *port; 2547 int baud = 9600; 2548 int bits = 8; 2549 int parity = 'n'; 2550 int flow = 'n'; 2551 2552 /* is this a valid port */ 2553 2554 if (co->index == -1 || co->index >= UART_NR) 2555 co->index = 0; 2556 2557 port = &s3c24xx_serial_ports[co->index].port; 2558 2559 /* is the port configured? */ 2560 2561 if (port->mapbase == 0x0) 2562 return -ENODEV; 2563 2564 cons_uart = port; 2565 2566 /* 2567 * Check whether an invalid uart number has been specified, and 2568 * if so, search for the first available port that does have 2569 * console support. 2570 */ 2571 if (options) 2572 uart_parse_options(options, &baud, &parity, &bits, &flow); 2573 else 2574 s3c24xx_serial_get_options(port, &baud, &parity, &bits); 2575 2576 dev_dbg(port->dev, "baud %d\n", baud); 2577 2578 return uart_set_options(port, co, baud, parity, bits, flow); 2579 } 2580 2581 static struct console s3c24xx_serial_console = { 2582 .name = S3C24XX_SERIAL_NAME, 2583 .device = uart_console_device, 2584 .flags = CON_PRINTBUFFER, 2585 .index = -1, 2586 .write = s3c24xx_serial_console_write, 2587 .setup = s3c24xx_serial_console_setup, 2588 .data = &s3c24xx_uart_drv, 2589 }; 2590 #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ 2591 2592 #ifdef CONFIG_CPU_S3C2410 2593 static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { 2594 .info = { 2595 .name = "Samsung S3C2410 UART", 2596 .type = TYPE_S3C24XX, 2597 .port_type = PORT_S3C2410, 2598 .fifosize = 16, 2599 .rx_fifomask = S3C2410_UFSTAT_RXMASK, 2600 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, 2601 .rx_fifofull = S3C2410_UFSTAT_RXFULL, 2602 .tx_fifofull = S3C2410_UFSTAT_TXFULL, 2603 .tx_fifomask = S3C2410_UFSTAT_TXMASK, 2604 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, 2605 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2606 .num_clks = 2, 2607 .clksel_mask = S3C2410_UCON_CLKMASK, 2608 .clksel_shift = S3C2410_UCON_CLKSHIFT, 2609 }, 2610 .def_cfg = { 2611 .ucon = S3C2410_UCON_DEFAULT, 2612 .ufcon = S3C2410_UFCON_DEFAULT, 2613 }, 2614 }; 2615 #define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data) 2616 #else 2617 #define S3C2410_SERIAL_DRV_DATA NULL 2618 #endif 2619 2620 #ifdef CONFIG_CPU_S3C2412 2621 static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { 2622 .info = { 2623 .name = "Samsung S3C2412 UART", 2624 .type = TYPE_S3C24XX, 2625 .port_type = PORT_S3C2412, 2626 .fifosize = 64, 2627 .has_divslot = 1, 2628 .rx_fifomask = S3C2440_UFSTAT_RXMASK, 2629 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, 2630 .rx_fifofull = S3C2440_UFSTAT_RXFULL, 2631 .tx_fifofull = S3C2440_UFSTAT_TXFULL, 2632 .tx_fifomask = S3C2440_UFSTAT_TXMASK, 2633 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, 2634 .def_clk_sel = S3C2410_UCON_CLKSEL2, 2635 .num_clks = 4, 2636 .clksel_mask = S3C2412_UCON_CLKMASK, 2637 .clksel_shift = S3C2412_UCON_CLKSHIFT, 2638 }, 2639 .def_cfg = { 2640 .ucon = S3C2410_UCON_DEFAULT, 2641 .ufcon = S3C2410_UFCON_DEFAULT, 2642 }, 2643 }; 2644 #define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data) 2645 #else 2646 #define S3C2412_SERIAL_DRV_DATA NULL 2647 #endif 2648 2649 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ 2650 defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) 2651 static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { 2652 .info = { 2653 .name = "Samsung S3C2440 UART", 2654 .type = TYPE_S3C24XX, 2655 .port_type = PORT_S3C2440, 2656 .fifosize = 64, 2657 .has_divslot = 1, 2658 .rx_fifomask = S3C2440_UFSTAT_RXMASK, 2659 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, 2660 .rx_fifofull = S3C2440_UFSTAT_RXFULL, 2661 .tx_fifofull = S3C2440_UFSTAT_TXFULL, 2662 .tx_fifomask = S3C2440_UFSTAT_TXMASK, 2663 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, 2664 .def_clk_sel = S3C2410_UCON_CLKSEL2, 2665 .num_clks = 4, 2666 .clksel_mask = S3C2412_UCON_CLKMASK, 2667 .clksel_shift = S3C2412_UCON_CLKSHIFT, 2668 .ucon_mask = S3C2440_UCON0_DIVMASK, 2669 }, 2670 .def_cfg = { 2671 .ucon = S3C2410_UCON_DEFAULT, 2672 .ufcon = S3C2410_UFCON_DEFAULT, 2673 }, 2674 }; 2675 #define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data) 2676 #else 2677 #define S3C2440_SERIAL_DRV_DATA NULL 2678 #endif 2679 2680 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) 2681 static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { 2682 .info = { 2683 .name = "Samsung S3C6400 UART", 2684 .type = TYPE_S3C6400, 2685 .port_type = PORT_S3C6400, 2686 .fifosize = 64, 2687 .has_divslot = 1, 2688 .rx_fifomask = S3C2440_UFSTAT_RXMASK, 2689 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, 2690 .rx_fifofull = S3C2440_UFSTAT_RXFULL, 2691 .tx_fifofull = S3C2440_UFSTAT_TXFULL, 2692 .tx_fifomask = S3C2440_UFSTAT_TXMASK, 2693 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, 2694 .def_clk_sel = S3C2410_UCON_CLKSEL2, 2695 .num_clks = 4, 2696 .clksel_mask = S3C6400_UCON_CLKMASK, 2697 .clksel_shift = S3C6400_UCON_CLKSHIFT, 2698 }, 2699 .def_cfg = { 2700 .ucon = S3C2410_UCON_DEFAULT, 2701 .ufcon = S3C2410_UFCON_DEFAULT, 2702 }, 2703 }; 2704 #define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data) 2705 #else 2706 #define S3C6400_SERIAL_DRV_DATA NULL 2707 #endif 2708 2709 #ifdef CONFIG_CPU_S5PV210 2710 static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { 2711 .info = { 2712 .name = "Samsung S5PV210 UART", 2713 .type = TYPE_S3C6400, 2714 .port_type = PORT_S3C6400, 2715 .has_divslot = 1, 2716 .rx_fifomask = S5PV210_UFSTAT_RXMASK, 2717 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, 2718 .rx_fifofull = S5PV210_UFSTAT_RXFULL, 2719 .tx_fifofull = S5PV210_UFSTAT_TXFULL, 2720 .tx_fifomask = S5PV210_UFSTAT_TXMASK, 2721 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, 2722 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2723 .num_clks = 2, 2724 .clksel_mask = S5PV210_UCON_CLKMASK, 2725 .clksel_shift = S5PV210_UCON_CLKSHIFT, 2726 }, 2727 .def_cfg = { 2728 .ucon = S5PV210_UCON_DEFAULT, 2729 .ufcon = S5PV210_UFCON_DEFAULT, 2730 }, 2731 .fifosize = { 256, 64, 16, 16 }, 2732 }; 2733 #define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data) 2734 #else 2735 #define S5PV210_SERIAL_DRV_DATA NULL 2736 #endif 2737 2738 #if defined(CONFIG_ARCH_EXYNOS) 2739 #define EXYNOS_COMMON_SERIAL_DRV_DATA() \ 2740 .info = { \ 2741 .name = "Samsung Exynos UART", \ 2742 .type = TYPE_S3C6400, \ 2743 .port_type = PORT_S3C6400, \ 2744 .has_divslot = 1, \ 2745 .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ 2746 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ 2747 .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ 2748 .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ 2749 .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ 2750 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ 2751 .def_clk_sel = S3C2410_UCON_CLKSEL0, \ 2752 .num_clks = 1, \ 2753 .clksel_mask = 0, \ 2754 .clksel_shift = 0, \ 2755 }, \ 2756 .def_cfg = { \ 2757 .ucon = S5PV210_UCON_DEFAULT, \ 2758 .ufcon = S5PV210_UFCON_DEFAULT, \ 2759 .has_fracval = 1, \ 2760 } \ 2761 2762 static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { 2763 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2764 .fifosize = { 256, 64, 16, 16 }, 2765 }; 2766 2767 static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { 2768 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2769 .fifosize = { 64, 256, 16, 256 }, 2770 }; 2771 2772 static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { 2773 EXYNOS_COMMON_SERIAL_DRV_DATA(), 2774 .fifosize = { 256, 64, 64, 64 }, 2775 }; 2776 2777 #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) 2778 #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) 2779 #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) 2780 2781 #else 2782 #define EXYNOS4210_SERIAL_DRV_DATA NULL 2783 #define EXYNOS5433_SERIAL_DRV_DATA NULL 2784 #define EXYNOS850_SERIAL_DRV_DATA NULL 2785 #endif 2786 2787 #ifdef CONFIG_ARCH_APPLE 2788 static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = { 2789 .info = { 2790 .name = "Apple S5L UART", 2791 .type = TYPE_APPLE_S5L, 2792 .port_type = PORT_8250, 2793 .fifosize = 16, 2794 .rx_fifomask = S3C2410_UFSTAT_RXMASK, 2795 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, 2796 .rx_fifofull = S3C2410_UFSTAT_RXFULL, 2797 .tx_fifofull = S3C2410_UFSTAT_TXFULL, 2798 .tx_fifomask = S3C2410_UFSTAT_TXMASK, 2799 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, 2800 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2801 .num_clks = 1, 2802 .clksel_mask = 0, 2803 .clksel_shift = 0, 2804 .ucon_mask = APPLE_S5L_UCON_MASK, 2805 }, 2806 .def_cfg = { 2807 .ucon = APPLE_S5L_UCON_DEFAULT, 2808 .ufcon = S3C2410_UFCON_DEFAULT, 2809 }, 2810 }; 2811 #define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data) 2812 #else 2813 #define S5L_SERIAL_DRV_DATA NULL 2814 #endif 2815 2816 #if defined(CONFIG_ARCH_ARTPEC) 2817 static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = { 2818 .info = { 2819 .name = "Axis ARTPEC-8 UART", 2820 .type = TYPE_S3C6400, 2821 .port_type = PORT_S3C6400, 2822 .fifosize = 64, 2823 .has_divslot = 1, 2824 .rx_fifomask = S5PV210_UFSTAT_RXMASK, 2825 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, 2826 .rx_fifofull = S5PV210_UFSTAT_RXFULL, 2827 .tx_fifofull = S5PV210_UFSTAT_TXFULL, 2828 .tx_fifomask = S5PV210_UFSTAT_TXMASK, 2829 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, 2830 .def_clk_sel = S3C2410_UCON_CLKSEL0, 2831 .num_clks = 1, 2832 .clksel_mask = 0, 2833 .clksel_shift = 0, 2834 }, 2835 .def_cfg = { 2836 .ucon = S5PV210_UCON_DEFAULT, 2837 .ufcon = S5PV210_UFCON_DEFAULT, 2838 .has_fracval = 1, 2839 } 2840 }; 2841 #define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data) 2842 #else 2843 #define ARTPEC8_SERIAL_DRV_DATA (NULL) 2844 #endif 2845 2846 static const struct platform_device_id s3c24xx_serial_driver_ids[] = { 2847 { 2848 .name = "s3c2410-uart", 2849 .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA, 2850 }, { 2851 .name = "s3c2412-uart", 2852 .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA, 2853 }, { 2854 .name = "s3c2440-uart", 2855 .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA, 2856 }, { 2857 .name = "s3c6400-uart", 2858 .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA, 2859 }, { 2860 .name = "s5pv210-uart", 2861 .driver_data = (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA, 2862 }, { 2863 .name = "exynos4210-uart", 2864 .driver_data = (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA, 2865 }, { 2866 .name = "exynos5433-uart", 2867 .driver_data = (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA, 2868 }, { 2869 .name = "s5l-uart", 2870 .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA, 2871 }, { 2872 .name = "exynos850-uart", 2873 .driver_data = (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA, 2874 }, { 2875 .name = "artpec8-uart", 2876 .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA, 2877 }, 2878 { }, 2879 }; 2880 MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); 2881 2882 #ifdef CONFIG_OF 2883 static const struct of_device_id s3c24xx_uart_dt_match[] = { 2884 { .compatible = "samsung,s3c2410-uart", 2885 .data = S3C2410_SERIAL_DRV_DATA }, 2886 { .compatible = "samsung,s3c2412-uart", 2887 .data = S3C2412_SERIAL_DRV_DATA }, 2888 { .compatible = "samsung,s3c2440-uart", 2889 .data = S3C2440_SERIAL_DRV_DATA }, 2890 { .compatible = "samsung,s3c6400-uart", 2891 .data = S3C6400_SERIAL_DRV_DATA }, 2892 { .compatible = "samsung,s5pv210-uart", 2893 .data = S5PV210_SERIAL_DRV_DATA }, 2894 { .compatible = "samsung,exynos4210-uart", 2895 .data = EXYNOS4210_SERIAL_DRV_DATA }, 2896 { .compatible = "samsung,exynos5433-uart", 2897 .data = EXYNOS5433_SERIAL_DRV_DATA }, 2898 { .compatible = "apple,s5l-uart", 2899 .data = S5L_SERIAL_DRV_DATA }, 2900 { .compatible = "samsung,exynos850-uart", 2901 .data = EXYNOS850_SERIAL_DRV_DATA }, 2902 { .compatible = "axis,artpec8-uart", 2903 .data = ARTPEC8_SERIAL_DRV_DATA }, 2904 {}, 2905 }; 2906 MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); 2907 #endif 2908 2909 static struct platform_driver samsung_serial_driver = { 2910 .probe = s3c24xx_serial_probe, 2911 .remove = s3c24xx_serial_remove, 2912 .id_table = s3c24xx_serial_driver_ids, 2913 .driver = { 2914 .name = "samsung-uart", 2915 .pm = SERIAL_SAMSUNG_PM_OPS, 2916 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), 2917 }, 2918 }; 2919 2920 static int __init samsung_serial_init(void) 2921 { 2922 int ret; 2923 2924 s3c24xx_serial_register_console(); 2925 2926 ret = platform_driver_register(&samsung_serial_driver); 2927 if (ret) { 2928 s3c24xx_serial_unregister_console(); 2929 return ret; 2930 } 2931 2932 return 0; 2933 } 2934 2935 static void __exit samsung_serial_exit(void) 2936 { 2937 platform_driver_unregister(&samsung_serial_driver); 2938 s3c24xx_serial_unregister_console(); 2939 } 2940 2941 module_init(samsung_serial_init); 2942 module_exit(samsung_serial_exit); 2943 2944 #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE 2945 /* 2946 * Early console. 2947 */ 2948 2949 static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val) 2950 { 2951 switch (port->iotype) { 2952 case UPIO_MEM: 2953 writeb(val, portaddr(port, reg)); 2954 break; 2955 case UPIO_MEM32: 2956 writel(val, portaddr(port, reg)); 2957 break; 2958 } 2959 } 2960 2961 struct samsung_early_console_data { 2962 u32 txfull_mask; 2963 u32 rxfifo_mask; 2964 }; 2965 2966 static void samsung_early_busyuart(const struct uart_port *port) 2967 { 2968 while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE)) 2969 ; 2970 } 2971 2972 static void samsung_early_busyuart_fifo(const struct uart_port *port) 2973 { 2974 const struct samsung_early_console_data *data = port->private_data; 2975 2976 while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask) 2977 ; 2978 } 2979 2980 static void samsung_early_putc(struct uart_port *port, unsigned char c) 2981 { 2982 if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) 2983 samsung_early_busyuart_fifo(port); 2984 else 2985 samsung_early_busyuart(port); 2986 2987 wr_reg_barrier(port, S3C2410_UTXH, c); 2988 } 2989 2990 static void samsung_early_write(struct console *con, const char *s, 2991 unsigned int n) 2992 { 2993 struct earlycon_device *dev = con->data; 2994 2995 uart_console_write(&dev->port, s, n, samsung_early_putc); 2996 } 2997 2998 static int samsung_early_read(struct console *con, char *s, unsigned int n) 2999 { 3000 struct earlycon_device *dev = con->data; 3001 const struct samsung_early_console_data *data = dev->port.private_data; 3002 int ch, ufstat, num_read = 0; 3003 3004 while (num_read < n) { 3005 ufstat = rd_regl(&dev->port, S3C2410_UFSTAT); 3006 if (!(ufstat & data->rxfifo_mask)) 3007 break; 3008 ch = rd_reg(&dev->port, S3C2410_URXH); 3009 if (ch == NO_POLL_CHAR) 3010 break; 3011 3012 s[num_read++] = ch; 3013 } 3014 3015 return num_read; 3016 } 3017 3018 static int __init samsung_early_console_setup(struct earlycon_device *device, 3019 const char *opt) 3020 { 3021 if (!device->port.membase) 3022 return -ENODEV; 3023 3024 device->con->write = samsung_early_write; 3025 device->con->read = samsung_early_read; 3026 return 0; 3027 } 3028 3029 /* S3C2410 */ 3030 static struct samsung_early_console_data s3c2410_early_console_data = { 3031 .txfull_mask = S3C2410_UFSTAT_TXFULL, 3032 .rxfifo_mask = S3C2410_UFSTAT_RXFULL | S3C2410_UFSTAT_RXMASK, 3033 }; 3034 3035 static int __init s3c2410_early_console_setup(struct earlycon_device *device, 3036 const char *opt) 3037 { 3038 device->port.private_data = &s3c2410_early_console_data; 3039 return samsung_early_console_setup(device, opt); 3040 } 3041 3042 OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart", 3043 s3c2410_early_console_setup); 3044 3045 /* S3C2412, S3C2440, S3C64xx */ 3046 static struct samsung_early_console_data s3c2440_early_console_data = { 3047 .txfull_mask = S3C2440_UFSTAT_TXFULL, 3048 .rxfifo_mask = S3C2440_UFSTAT_RXFULL | S3C2440_UFSTAT_RXMASK, 3049 }; 3050 3051 static int __init s3c2440_early_console_setup(struct earlycon_device *device, 3052 const char *opt) 3053 { 3054 device->port.private_data = &s3c2440_early_console_data; 3055 return samsung_early_console_setup(device, opt); 3056 } 3057 3058 OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart", 3059 s3c2440_early_console_setup); 3060 OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart", 3061 s3c2440_early_console_setup); 3062 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart", 3063 s3c2440_early_console_setup); 3064 3065 /* S5PV210, Exynos */ 3066 static struct samsung_early_console_data s5pv210_early_console_data = { 3067 .txfull_mask = S5PV210_UFSTAT_TXFULL, 3068 .rxfifo_mask = S5PV210_UFSTAT_RXFULL | S5PV210_UFSTAT_RXMASK, 3069 }; 3070 3071 static int __init s5pv210_early_console_setup(struct earlycon_device *device, 3072 const char *opt) 3073 { 3074 device->port.private_data = &s5pv210_early_console_data; 3075 return samsung_early_console_setup(device, opt); 3076 } 3077 3078 OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart", 3079 s5pv210_early_console_setup); 3080 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart", 3081 s5pv210_early_console_setup); 3082 OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart", 3083 s5pv210_early_console_setup); 3084 3085 /* Apple S5L */ 3086 static int __init apple_s5l_early_console_setup(struct earlycon_device *device, 3087 const char *opt) 3088 { 3089 /* Close enough to S3C2410 for earlycon... */ 3090 device->port.private_data = &s3c2410_early_console_data; 3091 3092 #ifdef CONFIG_ARM64 3093 /* ... but we need to override the existing fixmap entry as nGnRnE */ 3094 __set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase, 3095 __pgprot(PROT_DEVICE_nGnRnE)); 3096 #endif 3097 return samsung_early_console_setup(device, opt); 3098 } 3099 3100 OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup); 3101 #endif 3102 3103 MODULE_ALIAS("platform:samsung-uart"); 3104 MODULE_DESCRIPTION("Samsung SoC Serial port driver"); 3105 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); 3106 MODULE_LICENSE("GPL v2"); 3107