1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for msm7k serial device and console 4 * 5 * Copyright (C) 2007 Google, Inc. 6 * Author: Robert Love <rlove@google.com> 7 * Copyright (c) 2011, Code Aurora Forum. All rights reserved. 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/atomic.h> 12 #include <linux/dma/qcom_adm.h> 13 #include <linux/dma-mapping.h> 14 #include <linux/dmaengine.h> 15 #include <linux/module.h> 16 #include <linux/io.h> 17 #include <linux/ioport.h> 18 #include <linux/interrupt.h> 19 #include <linux/init.h> 20 #include <linux/console.h> 21 #include <linux/tty.h> 22 #include <linux/tty_flip.h> 23 #include <linux/serial_core.h> 24 #include <linux/slab.h> 25 #include <linux/clk.h> 26 #include <linux/platform_device.h> 27 #include <linux/pm_opp.h> 28 #include <linux/delay.h> 29 #include <linux/of.h> 30 #include <linux/of_device.h> 31 #include <linux/wait.h> 32 33 #define MSM_UART_MR1 0x0000 34 35 #define MSM_UART_MR1_AUTO_RFR_LEVEL0 0x3F 36 #define MSM_UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 37 #define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00 38 #define MSM_UART_MR1_RX_RDY_CTL BIT(7) 39 #define MSM_UART_MR1_CTS_CTL BIT(6) 40 41 #define MSM_UART_MR2 0x0004 42 #define MSM_UART_MR2_ERROR_MODE BIT(6) 43 #define MSM_UART_MR2_BITS_PER_CHAR 0x30 44 #define MSM_UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) 45 #define MSM_UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) 46 #define MSM_UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) 47 #define MSM_UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) 48 #define MSM_UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) 49 #define MSM_UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) 50 #define MSM_UART_MR2_PARITY_MODE_NONE 0x0 51 #define MSM_UART_MR2_PARITY_MODE_ODD 0x1 52 #define MSM_UART_MR2_PARITY_MODE_EVEN 0x2 53 #define MSM_UART_MR2_PARITY_MODE_SPACE 0x3 54 #define MSM_UART_MR2_PARITY_MODE 0x3 55 56 #define MSM_UART_CSR 0x0008 57 58 #define MSM_UART_TF 0x000C 59 #define UARTDM_TF 0x0070 60 61 #define MSM_UART_CR 0x0010 62 #define MSM_UART_CR_CMD_NULL (0 << 4) 63 #define MSM_UART_CR_CMD_RESET_RX (1 << 4) 64 #define MSM_UART_CR_CMD_RESET_TX (2 << 4) 65 #define MSM_UART_CR_CMD_RESET_ERR (3 << 4) 66 #define MSM_UART_CR_CMD_RESET_BREAK_INT (4 << 4) 67 #define MSM_UART_CR_CMD_START_BREAK (5 << 4) 68 #define MSM_UART_CR_CMD_STOP_BREAK (6 << 4) 69 #define MSM_UART_CR_CMD_RESET_CTS (7 << 4) 70 #define MSM_UART_CR_CMD_RESET_STALE_INT (8 << 4) 71 #define MSM_UART_CR_CMD_PACKET_MODE (9 << 4) 72 #define MSM_UART_CR_CMD_MODE_RESET (12 << 4) 73 #define MSM_UART_CR_CMD_SET_RFR (13 << 4) 74 #define MSM_UART_CR_CMD_RESET_RFR (14 << 4) 75 #define MSM_UART_CR_CMD_PROTECTION_EN (16 << 4) 76 #define MSM_UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8) 77 #define MSM_UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) 78 #define MSM_UART_CR_CMD_FORCE_STALE (4 << 8) 79 #define MSM_UART_CR_CMD_RESET_TX_READY (3 << 8) 80 #define MSM_UART_CR_TX_DISABLE BIT(3) 81 #define MSM_UART_CR_TX_ENABLE BIT(2) 82 #define MSM_UART_CR_RX_DISABLE BIT(1) 83 #define MSM_UART_CR_RX_ENABLE BIT(0) 84 #define MSM_UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4)) 85 86 #define MSM_UART_IMR 0x0014 87 #define MSM_UART_IMR_TXLEV BIT(0) 88 #define MSM_UART_IMR_RXSTALE BIT(3) 89 #define MSM_UART_IMR_RXLEV BIT(4) 90 #define MSM_UART_IMR_DELTA_CTS BIT(5) 91 #define MSM_UART_IMR_CURRENT_CTS BIT(6) 92 #define MSM_UART_IMR_RXBREAK_START BIT(10) 93 94 #define MSM_UART_IPR_RXSTALE_LAST 0x20 95 #define MSM_UART_IPR_STALE_LSB 0x1F 96 #define MSM_UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 97 #define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80 98 99 #define MSM_UART_IPR 0x0018 100 #define MSM_UART_TFWR 0x001C 101 #define MSM_UART_RFWR 0x0020 102 #define MSM_UART_HCR 0x0024 103 104 #define MSM_UART_MREG 0x0028 105 #define MSM_UART_NREG 0x002C 106 #define MSM_UART_DREG 0x0030 107 #define MSM_UART_MNDREG 0x0034 108 #define MSM_UART_IRDA 0x0038 109 #define MSM_UART_MISR_MODE 0x0040 110 #define MSM_UART_MISR_RESET 0x0044 111 #define MSM_UART_MISR_EXPORT 0x0048 112 #define MSM_UART_MISR_VAL 0x004C 113 #define MSM_UART_TEST_CTRL 0x0050 114 115 #define MSM_UART_SR 0x0008 116 #define MSM_UART_SR_HUNT_CHAR BIT(7) 117 #define MSM_UART_SR_RX_BREAK BIT(6) 118 #define MSM_UART_SR_PAR_FRAME_ERR BIT(5) 119 #define MSM_UART_SR_OVERRUN BIT(4) 120 #define MSM_UART_SR_TX_EMPTY BIT(3) 121 #define MSM_UART_SR_TX_READY BIT(2) 122 #define MSM_UART_SR_RX_FULL BIT(1) 123 #define MSM_UART_SR_RX_READY BIT(0) 124 125 #define MSM_UART_RF 0x000C 126 #define UARTDM_RF 0x0070 127 #define MSM_UART_MISR 0x0010 128 #define MSM_UART_ISR 0x0014 129 #define MSM_UART_ISR_TX_READY BIT(7) 130 131 #define UARTDM_RXFS 0x50 132 #define UARTDM_RXFS_BUF_SHIFT 0x7 133 #define UARTDM_RXFS_BUF_MASK 0x7 134 135 #define UARTDM_DMEN 0x3C 136 #define UARTDM_DMEN_RX_SC_ENABLE BIT(5) 137 #define UARTDM_DMEN_TX_SC_ENABLE BIT(4) 138 139 #define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */ 140 #define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */ 141 142 #define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */ 143 #define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */ 144 145 #define UARTDM_DMRX 0x34 146 #define UARTDM_NCF_TX 0x40 147 #define UARTDM_RX_TOTAL_SNAP 0x38 148 149 #define UARTDM_BURST_SIZE 16 /* in bytes */ 150 #define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */ 151 #define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */ 152 #define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4) 153 154 enum { 155 UARTDM_1P1 = 1, 156 UARTDM_1P2, 157 UARTDM_1P3, 158 UARTDM_1P4, 159 }; 160 161 struct msm_dma { 162 struct dma_chan *chan; 163 enum dma_data_direction dir; 164 dma_addr_t phys; 165 unsigned char *virt; 166 dma_cookie_t cookie; 167 u32 enable_bit; 168 unsigned int count; 169 struct dma_async_tx_descriptor *desc; 170 }; 171 172 struct msm_port { 173 struct uart_port uart; 174 char name[16]; 175 struct clk *clk; 176 struct clk *pclk; 177 unsigned int imr; 178 int is_uartdm; 179 unsigned int old_snap_state; 180 bool break_detected; 181 struct msm_dma tx_dma; 182 struct msm_dma rx_dma; 183 }; 184 185 static inline struct msm_port *to_msm_port(struct uart_port *up) 186 { 187 return container_of(up, struct msm_port, uart); 188 } 189 190 static 191 void msm_write(struct uart_port *port, unsigned int val, unsigned int off) 192 { 193 writel_relaxed(val, port->membase + off); 194 } 195 196 static 197 unsigned int msm_read(struct uart_port *port, unsigned int off) 198 { 199 return readl_relaxed(port->membase + off); 200 } 201 202 /* 203 * Setup the MND registers to use the TCXO clock. 204 */ 205 static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) 206 { 207 msm_write(port, 0x06, MSM_UART_MREG); 208 msm_write(port, 0xF1, MSM_UART_NREG); 209 msm_write(port, 0x0F, MSM_UART_DREG); 210 msm_write(port, 0x1A, MSM_UART_MNDREG); 211 port->uartclk = 1843200; 212 } 213 214 /* 215 * Setup the MND registers to use the TCXO clock divided by 4. 216 */ 217 static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) 218 { 219 msm_write(port, 0x18, MSM_UART_MREG); 220 msm_write(port, 0xF6, MSM_UART_NREG); 221 msm_write(port, 0x0F, MSM_UART_DREG); 222 msm_write(port, 0x0A, MSM_UART_MNDREG); 223 port->uartclk = 1843200; 224 } 225 226 static void msm_serial_set_mnd_regs(struct uart_port *port) 227 { 228 struct msm_port *msm_port = to_msm_port(port); 229 230 /* 231 * These registers don't exist so we change the clk input rate 232 * on uartdm hardware instead 233 */ 234 if (msm_port->is_uartdm) 235 return; 236 237 if (port->uartclk == 19200000) 238 msm_serial_set_mnd_regs_tcxo(port); 239 else if (port->uartclk == 4800000) 240 msm_serial_set_mnd_regs_tcxoby4(port); 241 } 242 243 static void msm_handle_tx(struct uart_port *port); 244 static void msm_start_rx_dma(struct msm_port *msm_port); 245 246 static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma) 247 { 248 struct device *dev = port->dev; 249 unsigned int mapped; 250 u32 val; 251 252 mapped = dma->count; 253 dma->count = 0; 254 255 dmaengine_terminate_all(dma->chan); 256 257 /* 258 * DMA Stall happens if enqueue and flush command happens concurrently. 259 * For example before changing the baud rate/protocol configuration and 260 * sending flush command to ADM, disable the channel of UARTDM. 261 * Note: should not reset the receiver here immediately as it is not 262 * suggested to do disable/reset or reset/disable at the same time. 263 */ 264 val = msm_read(port, UARTDM_DMEN); 265 val &= ~dma->enable_bit; 266 msm_write(port, val, UARTDM_DMEN); 267 268 if (mapped) 269 dma_unmap_single(dev, dma->phys, mapped, dma->dir); 270 } 271 272 static void msm_release_dma(struct msm_port *msm_port) 273 { 274 struct msm_dma *dma; 275 276 dma = &msm_port->tx_dma; 277 if (dma->chan) { 278 msm_stop_dma(&msm_port->uart, dma); 279 dma_release_channel(dma->chan); 280 } 281 282 memset(dma, 0, sizeof(*dma)); 283 284 dma = &msm_port->rx_dma; 285 if (dma->chan) { 286 msm_stop_dma(&msm_port->uart, dma); 287 dma_release_channel(dma->chan); 288 kfree(dma->virt); 289 } 290 291 memset(dma, 0, sizeof(*dma)); 292 } 293 294 static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) 295 { 296 struct device *dev = msm_port->uart.dev; 297 struct dma_slave_config conf; 298 struct qcom_adm_peripheral_config periph_conf = {}; 299 struct msm_dma *dma; 300 u32 crci = 0; 301 int ret; 302 303 dma = &msm_port->tx_dma; 304 305 /* allocate DMA resources, if available */ 306 dma->chan = dma_request_chan(dev, "tx"); 307 if (IS_ERR(dma->chan)) 308 goto no_tx; 309 310 of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci); 311 312 memset(&conf, 0, sizeof(conf)); 313 conf.direction = DMA_MEM_TO_DEV; 314 conf.device_fc = true; 315 conf.dst_addr = base + UARTDM_TF; 316 conf.dst_maxburst = UARTDM_BURST_SIZE; 317 if (crci) { 318 conf.peripheral_config = &periph_conf; 319 conf.peripheral_size = sizeof(periph_conf); 320 periph_conf.crci = crci; 321 } 322 323 ret = dmaengine_slave_config(dma->chan, &conf); 324 if (ret) 325 goto rel_tx; 326 327 dma->dir = DMA_TO_DEVICE; 328 329 if (msm_port->is_uartdm < UARTDM_1P4) 330 dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE; 331 else 332 dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE; 333 334 return; 335 336 rel_tx: 337 dma_release_channel(dma->chan); 338 no_tx: 339 memset(dma, 0, sizeof(*dma)); 340 } 341 342 static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) 343 { 344 struct device *dev = msm_port->uart.dev; 345 struct dma_slave_config conf; 346 struct qcom_adm_peripheral_config periph_conf = {}; 347 struct msm_dma *dma; 348 u32 crci = 0; 349 int ret; 350 351 dma = &msm_port->rx_dma; 352 353 /* allocate DMA resources, if available */ 354 dma->chan = dma_request_chan(dev, "rx"); 355 if (IS_ERR(dma->chan)) 356 goto no_rx; 357 358 of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci); 359 360 dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL); 361 if (!dma->virt) 362 goto rel_rx; 363 364 memset(&conf, 0, sizeof(conf)); 365 conf.direction = DMA_DEV_TO_MEM; 366 conf.device_fc = true; 367 conf.src_addr = base + UARTDM_RF; 368 conf.src_maxburst = UARTDM_BURST_SIZE; 369 if (crci) { 370 conf.peripheral_config = &periph_conf; 371 conf.peripheral_size = sizeof(periph_conf); 372 periph_conf.crci = crci; 373 } 374 375 ret = dmaengine_slave_config(dma->chan, &conf); 376 if (ret) 377 goto err; 378 379 dma->dir = DMA_FROM_DEVICE; 380 381 if (msm_port->is_uartdm < UARTDM_1P4) 382 dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE; 383 else 384 dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE; 385 386 return; 387 err: 388 kfree(dma->virt); 389 rel_rx: 390 dma_release_channel(dma->chan); 391 no_rx: 392 memset(dma, 0, sizeof(*dma)); 393 } 394 395 static inline void msm_wait_for_xmitr(struct uart_port *port) 396 { 397 unsigned int timeout = 500000; 398 399 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) { 400 if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY) 401 break; 402 udelay(1); 403 if (!timeout--) 404 break; 405 } 406 msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR); 407 } 408 409 static void msm_stop_tx(struct uart_port *port) 410 { 411 struct msm_port *msm_port = to_msm_port(port); 412 413 msm_port->imr &= ~MSM_UART_IMR_TXLEV; 414 msm_write(port, msm_port->imr, MSM_UART_IMR); 415 } 416 417 static void msm_start_tx(struct uart_port *port) 418 { 419 struct msm_port *msm_port = to_msm_port(port); 420 struct msm_dma *dma = &msm_port->tx_dma; 421 422 /* Already started in DMA mode */ 423 if (dma->count) 424 return; 425 426 msm_port->imr |= MSM_UART_IMR_TXLEV; 427 msm_write(port, msm_port->imr, MSM_UART_IMR); 428 } 429 430 static void msm_reset_dm_count(struct uart_port *port, int count) 431 { 432 msm_wait_for_xmitr(port); 433 msm_write(port, count, UARTDM_NCF_TX); 434 msm_read(port, UARTDM_NCF_TX); 435 } 436 437 static void msm_complete_tx_dma(void *args) 438 { 439 struct msm_port *msm_port = args; 440 struct uart_port *port = &msm_port->uart; 441 struct circ_buf *xmit = &port->state->xmit; 442 struct msm_dma *dma = &msm_port->tx_dma; 443 struct dma_tx_state state; 444 unsigned long flags; 445 unsigned int count; 446 u32 val; 447 448 uart_port_lock_irqsave(port, &flags); 449 450 /* Already stopped */ 451 if (!dma->count) 452 goto done; 453 454 dmaengine_tx_status(dma->chan, dma->cookie, &state); 455 456 dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir); 457 458 val = msm_read(port, UARTDM_DMEN); 459 val &= ~dma->enable_bit; 460 msm_write(port, val, UARTDM_DMEN); 461 462 if (msm_port->is_uartdm > UARTDM_1P3) { 463 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR); 464 msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR); 465 } 466 467 count = dma->count - state.residue; 468 uart_xmit_advance(port, count); 469 dma->count = 0; 470 471 /* Restore "Tx FIFO below watermark" interrupt */ 472 msm_port->imr |= MSM_UART_IMR_TXLEV; 473 msm_write(port, msm_port->imr, MSM_UART_IMR); 474 475 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 476 uart_write_wakeup(port); 477 478 msm_handle_tx(port); 479 done: 480 uart_port_unlock_irqrestore(port, flags); 481 } 482 483 static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count) 484 { 485 struct circ_buf *xmit = &msm_port->uart.state->xmit; 486 struct uart_port *port = &msm_port->uart; 487 struct msm_dma *dma = &msm_port->tx_dma; 488 void *cpu_addr; 489 int ret; 490 u32 val; 491 492 cpu_addr = &xmit->buf[xmit->tail]; 493 494 dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir); 495 ret = dma_mapping_error(port->dev, dma->phys); 496 if (ret) 497 return ret; 498 499 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, 500 count, DMA_MEM_TO_DEV, 501 DMA_PREP_INTERRUPT | 502 DMA_PREP_FENCE); 503 if (!dma->desc) { 504 ret = -EIO; 505 goto unmap; 506 } 507 508 dma->desc->callback = msm_complete_tx_dma; 509 dma->desc->callback_param = msm_port; 510 511 dma->cookie = dmaengine_submit(dma->desc); 512 ret = dma_submit_error(dma->cookie); 513 if (ret) 514 goto unmap; 515 516 /* 517 * Using DMA complete for Tx FIFO reload, no need for 518 * "Tx FIFO below watermark" one, disable it 519 */ 520 msm_port->imr &= ~MSM_UART_IMR_TXLEV; 521 msm_write(port, msm_port->imr, MSM_UART_IMR); 522 523 dma->count = count; 524 525 val = msm_read(port, UARTDM_DMEN); 526 val |= dma->enable_bit; 527 528 if (msm_port->is_uartdm < UARTDM_1P4) 529 msm_write(port, val, UARTDM_DMEN); 530 531 msm_reset_dm_count(port, count); 532 533 if (msm_port->is_uartdm > UARTDM_1P3) 534 msm_write(port, val, UARTDM_DMEN); 535 536 dma_async_issue_pending(dma->chan); 537 return 0; 538 unmap: 539 dma_unmap_single(port->dev, dma->phys, count, dma->dir); 540 return ret; 541 } 542 543 static void msm_complete_rx_dma(void *args) 544 { 545 struct msm_port *msm_port = args; 546 struct uart_port *port = &msm_port->uart; 547 struct tty_port *tport = &port->state->port; 548 struct msm_dma *dma = &msm_port->rx_dma; 549 int count = 0, i, sysrq; 550 unsigned long flags; 551 u32 val; 552 553 uart_port_lock_irqsave(port, &flags); 554 555 /* Already stopped */ 556 if (!dma->count) 557 goto done; 558 559 val = msm_read(port, UARTDM_DMEN); 560 val &= ~dma->enable_bit; 561 msm_write(port, val, UARTDM_DMEN); 562 563 if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) { 564 port->icount.overrun++; 565 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 566 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR); 567 } 568 569 count = msm_read(port, UARTDM_RX_TOTAL_SNAP); 570 571 port->icount.rx += count; 572 573 dma->count = 0; 574 575 dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); 576 577 for (i = 0; i < count; i++) { 578 char flag = TTY_NORMAL; 579 580 if (msm_port->break_detected && dma->virt[i] == 0) { 581 port->icount.brk++; 582 flag = TTY_BREAK; 583 msm_port->break_detected = false; 584 if (uart_handle_break(port)) 585 continue; 586 } 587 588 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK)) 589 flag = TTY_NORMAL; 590 591 sysrq = uart_prepare_sysrq_char(port, dma->virt[i]); 592 if (!sysrq) 593 tty_insert_flip_char(tport, dma->virt[i], flag); 594 } 595 596 msm_start_rx_dma(msm_port); 597 done: 598 uart_unlock_and_check_sysrq_irqrestore(port, flags); 599 600 if (count) 601 tty_flip_buffer_push(tport); 602 } 603 604 static void msm_start_rx_dma(struct msm_port *msm_port) 605 { 606 struct msm_dma *dma = &msm_port->rx_dma; 607 struct uart_port *uart = &msm_port->uart; 608 u32 val; 609 int ret; 610 611 if (IS_ENABLED(CONFIG_CONSOLE_POLL)) 612 return; 613 614 if (!dma->chan) 615 return; 616 617 dma->phys = dma_map_single(uart->dev, dma->virt, 618 UARTDM_RX_SIZE, dma->dir); 619 ret = dma_mapping_error(uart->dev, dma->phys); 620 if (ret) 621 goto sw_mode; 622 623 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys, 624 UARTDM_RX_SIZE, DMA_DEV_TO_MEM, 625 DMA_PREP_INTERRUPT); 626 if (!dma->desc) 627 goto unmap; 628 629 dma->desc->callback = msm_complete_rx_dma; 630 dma->desc->callback_param = msm_port; 631 632 dma->cookie = dmaengine_submit(dma->desc); 633 ret = dma_submit_error(dma->cookie); 634 if (ret) 635 goto unmap; 636 /* 637 * Using DMA for FIFO off-load, no need for "Rx FIFO over 638 * watermark" or "stale" interrupts, disable them 639 */ 640 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE); 641 642 /* 643 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3), 644 * we need RXSTALE to flush input DMA fifo to memory 645 */ 646 if (msm_port->is_uartdm < UARTDM_1P4) 647 msm_port->imr |= MSM_UART_IMR_RXSTALE; 648 649 msm_write(uart, msm_port->imr, MSM_UART_IMR); 650 651 dma->count = UARTDM_RX_SIZE; 652 653 dma_async_issue_pending(dma->chan); 654 655 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR); 656 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR); 657 658 val = msm_read(uart, UARTDM_DMEN); 659 val |= dma->enable_bit; 660 661 if (msm_port->is_uartdm < UARTDM_1P4) 662 msm_write(uart, val, UARTDM_DMEN); 663 664 msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX); 665 666 if (msm_port->is_uartdm > UARTDM_1P3) 667 msm_write(uart, val, UARTDM_DMEN); 668 669 return; 670 unmap: 671 dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir); 672 673 sw_mode: 674 /* 675 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN), 676 * receiver must be reset. 677 */ 678 msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR); 679 msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR); 680 681 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR); 682 msm_write(uart, 0xFFFFFF, UARTDM_DMRX); 683 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR); 684 685 /* Re-enable RX interrupts */ 686 msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE; 687 msm_write(uart, msm_port->imr, MSM_UART_IMR); 688 } 689 690 static void msm_stop_rx(struct uart_port *port) 691 { 692 struct msm_port *msm_port = to_msm_port(port); 693 struct msm_dma *dma = &msm_port->rx_dma; 694 695 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE); 696 msm_write(port, msm_port->imr, MSM_UART_IMR); 697 698 if (dma->chan) 699 msm_stop_dma(port, dma); 700 } 701 702 static void msm_enable_ms(struct uart_port *port) 703 { 704 struct msm_port *msm_port = to_msm_port(port); 705 706 msm_port->imr |= MSM_UART_IMR_DELTA_CTS; 707 msm_write(port, msm_port->imr, MSM_UART_IMR); 708 } 709 710 static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr) 711 __must_hold(&port->lock) 712 { 713 struct tty_port *tport = &port->state->port; 714 unsigned int sr; 715 int count = 0; 716 struct msm_port *msm_port = to_msm_port(port); 717 718 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) { 719 port->icount.overrun++; 720 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 721 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR); 722 } 723 724 if (misr & MSM_UART_IMR_RXSTALE) { 725 count = msm_read(port, UARTDM_RX_TOTAL_SNAP) - 726 msm_port->old_snap_state; 727 msm_port->old_snap_state = 0; 728 } else { 729 count = 4 * (msm_read(port, MSM_UART_RFWR)); 730 msm_port->old_snap_state += count; 731 } 732 733 /* TODO: Precise error reporting */ 734 735 port->icount.rx += count; 736 737 while (count > 0) { 738 unsigned char buf[4]; 739 int sysrq, r_count, i; 740 741 sr = msm_read(port, MSM_UART_SR); 742 if ((sr & MSM_UART_SR_RX_READY) == 0) { 743 msm_port->old_snap_state -= count; 744 break; 745 } 746 747 ioread32_rep(port->membase + UARTDM_RF, buf, 1); 748 r_count = min_t(int, count, sizeof(buf)); 749 750 for (i = 0; i < r_count; i++) { 751 char flag = TTY_NORMAL; 752 753 if (msm_port->break_detected && buf[i] == 0) { 754 port->icount.brk++; 755 flag = TTY_BREAK; 756 msm_port->break_detected = false; 757 if (uart_handle_break(port)) 758 continue; 759 } 760 761 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK)) 762 flag = TTY_NORMAL; 763 764 sysrq = uart_prepare_sysrq_char(port, buf[i]); 765 if (!sysrq) 766 tty_insert_flip_char(tport, buf[i], flag); 767 } 768 count -= r_count; 769 } 770 771 tty_flip_buffer_push(tport); 772 773 if (misr & (MSM_UART_IMR_RXSTALE)) 774 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR); 775 msm_write(port, 0xFFFFFF, UARTDM_DMRX); 776 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR); 777 778 /* Try to use DMA */ 779 msm_start_rx_dma(msm_port); 780 } 781 782 static void msm_handle_rx(struct uart_port *port) 783 __must_hold(&port->lock) 784 { 785 struct tty_port *tport = &port->state->port; 786 unsigned int sr; 787 788 /* 789 * Handle overrun. My understanding of the hardware is that overrun 790 * is not tied to the RX buffer, so we handle the case out of band. 791 */ 792 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) { 793 port->icount.overrun++; 794 tty_insert_flip_char(tport, 0, TTY_OVERRUN); 795 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR); 796 } 797 798 /* and now the main RX loop */ 799 while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) { 800 unsigned int c; 801 char flag = TTY_NORMAL; 802 int sysrq; 803 804 c = msm_read(port, MSM_UART_RF); 805 806 if (sr & MSM_UART_SR_RX_BREAK) { 807 port->icount.brk++; 808 if (uart_handle_break(port)) 809 continue; 810 } else if (sr & MSM_UART_SR_PAR_FRAME_ERR) { 811 port->icount.frame++; 812 } else { 813 port->icount.rx++; 814 } 815 816 /* Mask conditions we're ignoring. */ 817 sr &= port->read_status_mask; 818 819 if (sr & MSM_UART_SR_RX_BREAK) 820 flag = TTY_BREAK; 821 else if (sr & MSM_UART_SR_PAR_FRAME_ERR) 822 flag = TTY_FRAME; 823 824 sysrq = uart_prepare_sysrq_char(port, c); 825 if (!sysrq) 826 tty_insert_flip_char(tport, c, flag); 827 } 828 829 tty_flip_buffer_push(tport); 830 } 831 832 static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count) 833 { 834 struct circ_buf *xmit = &port->state->xmit; 835 struct msm_port *msm_port = to_msm_port(port); 836 unsigned int num_chars; 837 unsigned int tf_pointer = 0; 838 void __iomem *tf; 839 840 if (msm_port->is_uartdm) 841 tf = port->membase + UARTDM_TF; 842 else 843 tf = port->membase + MSM_UART_TF; 844 845 if (tx_count && msm_port->is_uartdm) 846 msm_reset_dm_count(port, tx_count); 847 848 while (tf_pointer < tx_count) { 849 int i; 850 char buf[4] = { 0 }; 851 852 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY)) 853 break; 854 855 if (msm_port->is_uartdm) 856 num_chars = min(tx_count - tf_pointer, 857 (unsigned int)sizeof(buf)); 858 else 859 num_chars = 1; 860 861 for (i = 0; i < num_chars; i++) 862 buf[i] = xmit->buf[xmit->tail + i]; 863 864 iowrite32_rep(tf, buf, 1); 865 uart_xmit_advance(port, num_chars); 866 tf_pointer += num_chars; 867 } 868 869 /* disable tx interrupts if nothing more to send */ 870 if (uart_circ_empty(xmit)) 871 msm_stop_tx(port); 872 873 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 874 uart_write_wakeup(port); 875 } 876 877 static void msm_handle_tx(struct uart_port *port) 878 { 879 struct msm_port *msm_port = to_msm_port(port); 880 struct circ_buf *xmit = &msm_port->uart.state->xmit; 881 struct msm_dma *dma = &msm_port->tx_dma; 882 unsigned int pio_count, dma_count, dma_min; 883 char buf[4] = { 0 }; 884 void __iomem *tf; 885 int err = 0; 886 887 if (port->x_char) { 888 if (msm_port->is_uartdm) 889 tf = port->membase + UARTDM_TF; 890 else 891 tf = port->membase + MSM_UART_TF; 892 893 buf[0] = port->x_char; 894 895 if (msm_port->is_uartdm) 896 msm_reset_dm_count(port, 1); 897 898 iowrite32_rep(tf, buf, 1); 899 port->icount.tx++; 900 port->x_char = 0; 901 return; 902 } 903 904 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { 905 msm_stop_tx(port); 906 return; 907 } 908 909 pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 910 dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); 911 912 dma_min = 1; /* Always DMA */ 913 if (msm_port->is_uartdm > UARTDM_1P3) { 914 dma_count = UARTDM_TX_AIGN(dma_count); 915 dma_min = UARTDM_BURST_SIZE; 916 } else { 917 if (dma_count > UARTDM_TX_MAX) 918 dma_count = UARTDM_TX_MAX; 919 } 920 921 if (pio_count > port->fifosize) 922 pio_count = port->fifosize; 923 924 if (!dma->chan || dma_count < dma_min) 925 msm_handle_tx_pio(port, pio_count); 926 else 927 err = msm_handle_tx_dma(msm_port, dma_count); 928 929 if (err) /* fall back to PIO mode */ 930 msm_handle_tx_pio(port, pio_count); 931 } 932 933 static void msm_handle_delta_cts(struct uart_port *port) 934 { 935 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR); 936 port->icount.cts++; 937 wake_up_interruptible(&port->state->port.delta_msr_wait); 938 } 939 940 static irqreturn_t msm_uart_irq(int irq, void *dev_id) 941 { 942 struct uart_port *port = dev_id; 943 struct msm_port *msm_port = to_msm_port(port); 944 struct msm_dma *dma = &msm_port->rx_dma; 945 unsigned int misr; 946 u32 val; 947 948 uart_port_lock(port); 949 misr = msm_read(port, MSM_UART_MISR); 950 msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */ 951 952 if (misr & MSM_UART_IMR_RXBREAK_START) { 953 msm_port->break_detected = true; 954 msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR); 955 } 956 957 if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) { 958 if (dma->count) { 959 val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE; 960 msm_write(port, val, MSM_UART_CR); 961 val = MSM_UART_CR_CMD_RESET_STALE_INT; 962 msm_write(port, val, MSM_UART_CR); 963 /* 964 * Flush DMA input fifo to memory, this will also 965 * trigger DMA RX completion 966 */ 967 dmaengine_terminate_all(dma->chan); 968 } else if (msm_port->is_uartdm) { 969 msm_handle_rx_dm(port, misr); 970 } else { 971 msm_handle_rx(port); 972 } 973 } 974 if (misr & MSM_UART_IMR_TXLEV) 975 msm_handle_tx(port); 976 if (misr & MSM_UART_IMR_DELTA_CTS) 977 msm_handle_delta_cts(port); 978 979 msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */ 980 uart_unlock_and_check_sysrq(port); 981 982 return IRQ_HANDLED; 983 } 984 985 static unsigned int msm_tx_empty(struct uart_port *port) 986 { 987 return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; 988 } 989 990 static unsigned int msm_get_mctrl(struct uart_port *port) 991 { 992 return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; 993 } 994 995 static void msm_reset(struct uart_port *port) 996 { 997 struct msm_port *msm_port = to_msm_port(port); 998 unsigned int mr; 999 1000 /* reset everything */ 1001 msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR); 1002 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR); 1003 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR); 1004 msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR); 1005 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR); 1006 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR); 1007 mr = msm_read(port, MSM_UART_MR1); 1008 mr &= ~MSM_UART_MR1_RX_RDY_CTL; 1009 msm_write(port, mr, MSM_UART_MR1); 1010 1011 /* Disable DM modes */ 1012 if (msm_port->is_uartdm) 1013 msm_write(port, 0, UARTDM_DMEN); 1014 } 1015 1016 static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) 1017 { 1018 unsigned int mr; 1019 1020 mr = msm_read(port, MSM_UART_MR1); 1021 1022 if (!(mctrl & TIOCM_RTS)) { 1023 mr &= ~MSM_UART_MR1_RX_RDY_CTL; 1024 msm_write(port, mr, MSM_UART_MR1); 1025 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR); 1026 } else { 1027 mr |= MSM_UART_MR1_RX_RDY_CTL; 1028 msm_write(port, mr, MSM_UART_MR1); 1029 } 1030 } 1031 1032 static void msm_break_ctl(struct uart_port *port, int break_ctl) 1033 { 1034 if (break_ctl) 1035 msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR); 1036 else 1037 msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR); 1038 } 1039 1040 struct msm_baud_map { 1041 u16 divisor; 1042 u8 code; 1043 u8 rxstale; 1044 }; 1045 1046 static const struct msm_baud_map * 1047 msm_find_best_baud(struct uart_port *port, unsigned int baud, 1048 unsigned long *rate) 1049 { 1050 struct msm_port *msm_port = to_msm_port(port); 1051 unsigned int divisor, result; 1052 unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX; 1053 const struct msm_baud_map *entry, *end, *best; 1054 static const struct msm_baud_map table[] = { 1055 { 1, 0xff, 31 }, 1056 { 2, 0xee, 16 }, 1057 { 3, 0xdd, 8 }, 1058 { 4, 0xcc, 6 }, 1059 { 6, 0xbb, 6 }, 1060 { 8, 0xaa, 6 }, 1061 { 12, 0x99, 6 }, 1062 { 16, 0x88, 1 }, 1063 { 24, 0x77, 1 }, 1064 { 32, 0x66, 1 }, 1065 { 48, 0x55, 1 }, 1066 { 96, 0x44, 1 }, 1067 { 192, 0x33, 1 }, 1068 { 384, 0x22, 1 }, 1069 { 768, 0x11, 1 }, 1070 { 1536, 0x00, 1 }, 1071 }; 1072 1073 best = table; /* Default to smallest divider */ 1074 target = clk_round_rate(msm_port->clk, 16 * baud); 1075 divisor = DIV_ROUND_CLOSEST(target, 16 * baud); 1076 1077 end = table + ARRAY_SIZE(table); 1078 entry = table; 1079 while (entry < end) { 1080 if (entry->divisor <= divisor) { 1081 result = target / entry->divisor / 16; 1082 diff = abs(result - baud); 1083 1084 /* Keep track of best entry */ 1085 if (diff < best_diff) { 1086 best_diff = diff; 1087 best = entry; 1088 best_rate = target; 1089 } 1090 1091 if (result == baud) 1092 break; 1093 } else if (entry->divisor > divisor) { 1094 old = target; 1095 target = clk_round_rate(msm_port->clk, old + 1); 1096 /* 1097 * The rate didn't get any faster so we can't do 1098 * better at dividing it down 1099 */ 1100 if (target == old) 1101 break; 1102 1103 /* Start the divisor search over at this new rate */ 1104 entry = table; 1105 divisor = DIV_ROUND_CLOSEST(target, 16 * baud); 1106 continue; 1107 } 1108 entry++; 1109 } 1110 1111 *rate = best_rate; 1112 return best; 1113 } 1114 1115 static int msm_set_baud_rate(struct uart_port *port, unsigned int baud, 1116 unsigned long *saved_flags) 1117 __must_hold(&port->lock) 1118 { 1119 unsigned int rxstale, watermark, mask; 1120 struct msm_port *msm_port = to_msm_port(port); 1121 const struct msm_baud_map *entry; 1122 unsigned long flags, rate; 1123 1124 flags = *saved_flags; 1125 uart_port_unlock_irqrestore(port, flags); 1126 1127 entry = msm_find_best_baud(port, baud, &rate); 1128 dev_pm_opp_set_rate(port->dev, rate); 1129 baud = rate / 16 / entry->divisor; 1130 1131 uart_port_lock_irqsave(port, &flags); 1132 *saved_flags = flags; 1133 port->uartclk = rate; 1134 1135 msm_write(port, entry->code, MSM_UART_CSR); 1136 1137 /* RX stale watermark */ 1138 rxstale = entry->rxstale; 1139 watermark = MSM_UART_IPR_STALE_LSB & rxstale; 1140 if (msm_port->is_uartdm) { 1141 mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB; 1142 } else { 1143 watermark |= MSM_UART_IPR_RXSTALE_LAST; 1144 mask = MSM_UART_IPR_STALE_TIMEOUT_MSB; 1145 } 1146 1147 watermark |= mask & (rxstale << 2); 1148 1149 msm_write(port, watermark, MSM_UART_IPR); 1150 1151 /* set RX watermark */ 1152 watermark = (port->fifosize * 3) / 4; 1153 msm_write(port, watermark, MSM_UART_RFWR); 1154 1155 /* set TX watermark */ 1156 msm_write(port, 10, MSM_UART_TFWR); 1157 1158 msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR); 1159 msm_reset(port); 1160 1161 /* Enable RX and TX */ 1162 msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR); 1163 1164 /* turn on RX and CTS interrupts */ 1165 msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE | 1166 MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START; 1167 1168 msm_write(port, msm_port->imr, MSM_UART_IMR); 1169 1170 if (msm_port->is_uartdm) { 1171 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR); 1172 msm_write(port, 0xFFFFFF, UARTDM_DMRX); 1173 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR); 1174 } 1175 1176 return baud; 1177 } 1178 1179 static void msm_init_clock(struct uart_port *port) 1180 { 1181 struct msm_port *msm_port = to_msm_port(port); 1182 1183 dev_pm_opp_set_rate(port->dev, port->uartclk); 1184 clk_prepare_enable(msm_port->clk); 1185 clk_prepare_enable(msm_port->pclk); 1186 msm_serial_set_mnd_regs(port); 1187 } 1188 1189 static int msm_startup(struct uart_port *port) 1190 { 1191 struct msm_port *msm_port = to_msm_port(port); 1192 unsigned int data, rfr_level, mask; 1193 int ret; 1194 1195 snprintf(msm_port->name, sizeof(msm_port->name), 1196 "msm_serial%d", port->line); 1197 1198 msm_init_clock(port); 1199 1200 if (likely(port->fifosize > 12)) 1201 rfr_level = port->fifosize - 12; 1202 else 1203 rfr_level = port->fifosize; 1204 1205 /* set automatic RFR level */ 1206 data = msm_read(port, MSM_UART_MR1); 1207 1208 if (msm_port->is_uartdm) 1209 mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1; 1210 else 1211 mask = MSM_UART_MR1_AUTO_RFR_LEVEL1; 1212 1213 data &= ~mask; 1214 data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0; 1215 data |= mask & (rfr_level << 2); 1216 data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; 1217 msm_write(port, data, MSM_UART_MR1); 1218 1219 if (msm_port->is_uartdm) { 1220 msm_request_tx_dma(msm_port, msm_port->uart.mapbase); 1221 msm_request_rx_dma(msm_port, msm_port->uart.mapbase); 1222 } 1223 1224 ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH, 1225 msm_port->name, port); 1226 if (unlikely(ret)) 1227 goto err_irq; 1228 1229 return 0; 1230 1231 err_irq: 1232 if (msm_port->is_uartdm) 1233 msm_release_dma(msm_port); 1234 1235 clk_disable_unprepare(msm_port->pclk); 1236 clk_disable_unprepare(msm_port->clk); 1237 dev_pm_opp_set_rate(port->dev, 0); 1238 1239 return ret; 1240 } 1241 1242 static void msm_shutdown(struct uart_port *port) 1243 { 1244 struct msm_port *msm_port = to_msm_port(port); 1245 1246 msm_port->imr = 0; 1247 msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */ 1248 1249 if (msm_port->is_uartdm) 1250 msm_release_dma(msm_port); 1251 1252 clk_disable_unprepare(msm_port->clk); 1253 dev_pm_opp_set_rate(port->dev, 0); 1254 1255 free_irq(port->irq, port); 1256 } 1257 1258 static void msm_set_termios(struct uart_port *port, struct ktermios *termios, 1259 const struct ktermios *old) 1260 { 1261 struct msm_port *msm_port = to_msm_port(port); 1262 struct msm_dma *dma = &msm_port->rx_dma; 1263 unsigned long flags; 1264 unsigned int baud, mr; 1265 1266 uart_port_lock_irqsave(port, &flags); 1267 1268 if (dma->chan) /* Terminate if any */ 1269 msm_stop_dma(port, dma); 1270 1271 /* calculate and set baud rate */ 1272 baud = uart_get_baud_rate(port, termios, old, 300, 4000000); 1273 baud = msm_set_baud_rate(port, baud, &flags); 1274 if (tty_termios_baud_rate(termios)) 1275 tty_termios_encode_baud_rate(termios, baud, baud); 1276 1277 /* calculate parity */ 1278 mr = msm_read(port, MSM_UART_MR2); 1279 mr &= ~MSM_UART_MR2_PARITY_MODE; 1280 if (termios->c_cflag & PARENB) { 1281 if (termios->c_cflag & PARODD) 1282 mr |= MSM_UART_MR2_PARITY_MODE_ODD; 1283 else if (termios->c_cflag & CMSPAR) 1284 mr |= MSM_UART_MR2_PARITY_MODE_SPACE; 1285 else 1286 mr |= MSM_UART_MR2_PARITY_MODE_EVEN; 1287 } 1288 1289 /* calculate bits per char */ 1290 mr &= ~MSM_UART_MR2_BITS_PER_CHAR; 1291 switch (termios->c_cflag & CSIZE) { 1292 case CS5: 1293 mr |= MSM_UART_MR2_BITS_PER_CHAR_5; 1294 break; 1295 case CS6: 1296 mr |= MSM_UART_MR2_BITS_PER_CHAR_6; 1297 break; 1298 case CS7: 1299 mr |= MSM_UART_MR2_BITS_PER_CHAR_7; 1300 break; 1301 case CS8: 1302 default: 1303 mr |= MSM_UART_MR2_BITS_PER_CHAR_8; 1304 break; 1305 } 1306 1307 /* calculate stop bits */ 1308 mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO); 1309 if (termios->c_cflag & CSTOPB) 1310 mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO; 1311 else 1312 mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE; 1313 1314 /* set parity, bits per char, and stop bit */ 1315 msm_write(port, mr, MSM_UART_MR2); 1316 1317 /* calculate and set hardware flow control */ 1318 mr = msm_read(port, MSM_UART_MR1); 1319 mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL); 1320 if (termios->c_cflag & CRTSCTS) { 1321 mr |= MSM_UART_MR1_CTS_CTL; 1322 mr |= MSM_UART_MR1_RX_RDY_CTL; 1323 } 1324 msm_write(port, mr, MSM_UART_MR1); 1325 1326 /* Configure status bits to ignore based on termio flags. */ 1327 port->read_status_mask = 0; 1328 if (termios->c_iflag & INPCK) 1329 port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR; 1330 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 1331 port->read_status_mask |= MSM_UART_SR_RX_BREAK; 1332 1333 uart_update_timeout(port, termios->c_cflag, baud); 1334 1335 /* Try to use DMA */ 1336 msm_start_rx_dma(msm_port); 1337 1338 uart_port_unlock_irqrestore(port, flags); 1339 } 1340 1341 static const char *msm_type(struct uart_port *port) 1342 { 1343 return "MSM"; 1344 } 1345 1346 static void msm_release_port(struct uart_port *port) 1347 { 1348 struct platform_device *pdev = to_platform_device(port->dev); 1349 struct resource *uart_resource; 1350 resource_size_t size; 1351 1352 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1353 if (unlikely(!uart_resource)) 1354 return; 1355 size = resource_size(uart_resource); 1356 1357 release_mem_region(port->mapbase, size); 1358 iounmap(port->membase); 1359 port->membase = NULL; 1360 } 1361 1362 static int msm_request_port(struct uart_port *port) 1363 { 1364 struct platform_device *pdev = to_platform_device(port->dev); 1365 struct resource *uart_resource; 1366 resource_size_t size; 1367 int ret; 1368 1369 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1370 if (unlikely(!uart_resource)) 1371 return -ENXIO; 1372 1373 size = resource_size(uart_resource); 1374 1375 if (!request_mem_region(port->mapbase, size, "msm_serial")) 1376 return -EBUSY; 1377 1378 port->membase = ioremap(port->mapbase, size); 1379 if (!port->membase) { 1380 ret = -EBUSY; 1381 goto fail_release_port; 1382 } 1383 1384 return 0; 1385 1386 fail_release_port: 1387 release_mem_region(port->mapbase, size); 1388 return ret; 1389 } 1390 1391 static void msm_config_port(struct uart_port *port, int flags) 1392 { 1393 int ret; 1394 1395 if (flags & UART_CONFIG_TYPE) { 1396 port->type = PORT_MSM; 1397 ret = msm_request_port(port); 1398 if (ret) 1399 return; 1400 } 1401 } 1402 1403 static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) 1404 { 1405 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) 1406 return -EINVAL; 1407 if (unlikely(port->irq != ser->irq)) 1408 return -EINVAL; 1409 return 0; 1410 } 1411 1412 static void msm_power(struct uart_port *port, unsigned int state, 1413 unsigned int oldstate) 1414 { 1415 struct msm_port *msm_port = to_msm_port(port); 1416 1417 switch (state) { 1418 case 0: 1419 dev_pm_opp_set_rate(port->dev, port->uartclk); 1420 clk_prepare_enable(msm_port->clk); 1421 clk_prepare_enable(msm_port->pclk); 1422 break; 1423 case 3: 1424 clk_disable_unprepare(msm_port->clk); 1425 dev_pm_opp_set_rate(port->dev, 0); 1426 clk_disable_unprepare(msm_port->pclk); 1427 break; 1428 default: 1429 pr_err("msm_serial: Unknown PM state %d\n", state); 1430 } 1431 } 1432 1433 #ifdef CONFIG_CONSOLE_POLL 1434 static int msm_poll_get_char_single(struct uart_port *port) 1435 { 1436 struct msm_port *msm_port = to_msm_port(port); 1437 unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF; 1438 1439 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) 1440 return NO_POLL_CHAR; 1441 1442 return msm_read(port, rf_reg) & 0xff; 1443 } 1444 1445 static int msm_poll_get_char_dm(struct uart_port *port) 1446 { 1447 int c; 1448 static u32 slop; 1449 static int count; 1450 unsigned char *sp = (unsigned char *)&slop; 1451 1452 /* Check if a previous read had more than one char */ 1453 if (count) { 1454 c = sp[sizeof(slop) - count]; 1455 count--; 1456 /* Or if FIFO is empty */ 1457 } else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) { 1458 /* 1459 * If RX packing buffer has less than a word, force stale to 1460 * push contents into RX FIFO 1461 */ 1462 count = msm_read(port, UARTDM_RXFS); 1463 count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK; 1464 if (count) { 1465 msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR); 1466 slop = msm_read(port, UARTDM_RF); 1467 c = sp[0]; 1468 count--; 1469 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR); 1470 msm_write(port, 0xFFFFFF, UARTDM_DMRX); 1471 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR); 1472 } else { 1473 c = NO_POLL_CHAR; 1474 } 1475 /* FIFO has a word */ 1476 } else { 1477 slop = msm_read(port, UARTDM_RF); 1478 c = sp[0]; 1479 count = sizeof(slop) - 1; 1480 } 1481 1482 return c; 1483 } 1484 1485 static int msm_poll_get_char(struct uart_port *port) 1486 { 1487 u32 imr; 1488 int c; 1489 struct msm_port *msm_port = to_msm_port(port); 1490 1491 /* Disable all interrupts */ 1492 imr = msm_read(port, MSM_UART_IMR); 1493 msm_write(port, 0, MSM_UART_IMR); 1494 1495 if (msm_port->is_uartdm) 1496 c = msm_poll_get_char_dm(port); 1497 else 1498 c = msm_poll_get_char_single(port); 1499 1500 /* Enable interrupts */ 1501 msm_write(port, imr, MSM_UART_IMR); 1502 1503 return c; 1504 } 1505 1506 static void msm_poll_put_char(struct uart_port *port, unsigned char c) 1507 { 1508 u32 imr; 1509 struct msm_port *msm_port = to_msm_port(port); 1510 1511 /* Disable all interrupts */ 1512 imr = msm_read(port, MSM_UART_IMR); 1513 msm_write(port, 0, MSM_UART_IMR); 1514 1515 if (msm_port->is_uartdm) 1516 msm_reset_dm_count(port, 1); 1517 1518 /* Wait until FIFO is empty */ 1519 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY)) 1520 cpu_relax(); 1521 1522 /* Write a character */ 1523 msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF); 1524 1525 /* Wait until FIFO is empty */ 1526 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY)) 1527 cpu_relax(); 1528 1529 /* Enable interrupts */ 1530 msm_write(port, imr, MSM_UART_IMR); 1531 } 1532 #endif 1533 1534 static const struct uart_ops msm_uart_pops = { 1535 .tx_empty = msm_tx_empty, 1536 .set_mctrl = msm_set_mctrl, 1537 .get_mctrl = msm_get_mctrl, 1538 .stop_tx = msm_stop_tx, 1539 .start_tx = msm_start_tx, 1540 .stop_rx = msm_stop_rx, 1541 .enable_ms = msm_enable_ms, 1542 .break_ctl = msm_break_ctl, 1543 .startup = msm_startup, 1544 .shutdown = msm_shutdown, 1545 .set_termios = msm_set_termios, 1546 .type = msm_type, 1547 .release_port = msm_release_port, 1548 .request_port = msm_request_port, 1549 .config_port = msm_config_port, 1550 .verify_port = msm_verify_port, 1551 .pm = msm_power, 1552 #ifdef CONFIG_CONSOLE_POLL 1553 .poll_get_char = msm_poll_get_char, 1554 .poll_put_char = msm_poll_put_char, 1555 #endif 1556 }; 1557 1558 static struct msm_port msm_uart_ports[] = { 1559 { 1560 .uart = { 1561 .iotype = UPIO_MEM, 1562 .ops = &msm_uart_pops, 1563 .flags = UPF_BOOT_AUTOCONF, 1564 .fifosize = 64, 1565 .line = 0, 1566 }, 1567 }, 1568 { 1569 .uart = { 1570 .iotype = UPIO_MEM, 1571 .ops = &msm_uart_pops, 1572 .flags = UPF_BOOT_AUTOCONF, 1573 .fifosize = 64, 1574 .line = 1, 1575 }, 1576 }, 1577 { 1578 .uart = { 1579 .iotype = UPIO_MEM, 1580 .ops = &msm_uart_pops, 1581 .flags = UPF_BOOT_AUTOCONF, 1582 .fifosize = 64, 1583 .line = 2, 1584 }, 1585 }, 1586 }; 1587 1588 #define MSM_UART_NR ARRAY_SIZE(msm_uart_ports) 1589 1590 static inline struct uart_port *msm_get_port_from_line(unsigned int line) 1591 { 1592 return &msm_uart_ports[line].uart; 1593 } 1594 1595 #ifdef CONFIG_SERIAL_MSM_CONSOLE 1596 static void __msm_console_write(struct uart_port *port, const char *s, 1597 unsigned int count, bool is_uartdm) 1598 { 1599 unsigned long flags; 1600 int i; 1601 int num_newlines = 0; 1602 bool replaced = false; 1603 void __iomem *tf; 1604 int locked = 1; 1605 1606 if (is_uartdm) 1607 tf = port->membase + UARTDM_TF; 1608 else 1609 tf = port->membase + MSM_UART_TF; 1610 1611 /* Account for newlines that will get a carriage return added */ 1612 for (i = 0; i < count; i++) 1613 if (s[i] == '\n') 1614 num_newlines++; 1615 count += num_newlines; 1616 1617 if (oops_in_progress) 1618 locked = uart_port_trylock_irqsave(port, &flags); 1619 else 1620 uart_port_lock_irqsave(port, &flags); 1621 1622 if (is_uartdm) 1623 msm_reset_dm_count(port, count); 1624 1625 i = 0; 1626 while (i < count) { 1627 int j; 1628 unsigned int num_chars; 1629 char buf[4] = { 0 }; 1630 1631 if (is_uartdm) 1632 num_chars = min(count - i, (unsigned int)sizeof(buf)); 1633 else 1634 num_chars = 1; 1635 1636 for (j = 0; j < num_chars; j++) { 1637 char c = *s; 1638 1639 if (c == '\n' && !replaced) { 1640 buf[j] = '\r'; 1641 j++; 1642 replaced = true; 1643 } 1644 if (j < num_chars) { 1645 buf[j] = c; 1646 s++; 1647 replaced = false; 1648 } 1649 } 1650 1651 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY)) 1652 cpu_relax(); 1653 1654 iowrite32_rep(tf, buf, 1); 1655 i += num_chars; 1656 } 1657 1658 if (locked) 1659 uart_port_unlock_irqrestore(port, flags); 1660 } 1661 1662 static void msm_console_write(struct console *co, const char *s, 1663 unsigned int count) 1664 { 1665 struct uart_port *port; 1666 struct msm_port *msm_port; 1667 1668 BUG_ON(co->index < 0 || co->index >= MSM_UART_NR); 1669 1670 port = msm_get_port_from_line(co->index); 1671 msm_port = to_msm_port(port); 1672 1673 __msm_console_write(port, s, count, msm_port->is_uartdm); 1674 } 1675 1676 static int msm_console_setup(struct console *co, char *options) 1677 { 1678 struct uart_port *port; 1679 int baud = 115200; 1680 int bits = 8; 1681 int parity = 'n'; 1682 int flow = 'n'; 1683 1684 if (unlikely(co->index >= MSM_UART_NR || co->index < 0)) 1685 return -ENXIO; 1686 1687 port = msm_get_port_from_line(co->index); 1688 1689 if (unlikely(!port->membase)) 1690 return -ENXIO; 1691 1692 msm_init_clock(port); 1693 1694 if (options) 1695 uart_parse_options(options, &baud, &parity, &bits, &flow); 1696 1697 pr_info("msm_serial: console setup on port #%d\n", port->line); 1698 1699 return uart_set_options(port, co, baud, parity, bits, flow); 1700 } 1701 1702 static void 1703 msm_serial_early_write(struct console *con, const char *s, unsigned n) 1704 { 1705 struct earlycon_device *dev = con->data; 1706 1707 __msm_console_write(&dev->port, s, n, false); 1708 } 1709 1710 static int __init 1711 msm_serial_early_console_setup(struct earlycon_device *device, const char *opt) 1712 { 1713 if (!device->port.membase) 1714 return -ENODEV; 1715 1716 device->con->write = msm_serial_early_write; 1717 return 0; 1718 } 1719 OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart", 1720 msm_serial_early_console_setup); 1721 1722 static void 1723 msm_serial_early_write_dm(struct console *con, const char *s, unsigned n) 1724 { 1725 struct earlycon_device *dev = con->data; 1726 1727 __msm_console_write(&dev->port, s, n, true); 1728 } 1729 1730 static int __init 1731 msm_serial_early_console_setup_dm(struct earlycon_device *device, 1732 const char *opt) 1733 { 1734 if (!device->port.membase) 1735 return -ENODEV; 1736 1737 device->con->write = msm_serial_early_write_dm; 1738 return 0; 1739 } 1740 OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm", 1741 msm_serial_early_console_setup_dm); 1742 1743 static struct uart_driver msm_uart_driver; 1744 1745 static struct console msm_console = { 1746 .name = "ttyMSM", 1747 .write = msm_console_write, 1748 .device = uart_console_device, 1749 .setup = msm_console_setup, 1750 .flags = CON_PRINTBUFFER, 1751 .index = -1, 1752 .data = &msm_uart_driver, 1753 }; 1754 1755 #define MSM_CONSOLE (&msm_console) 1756 1757 #else 1758 #define MSM_CONSOLE NULL 1759 #endif 1760 1761 static struct uart_driver msm_uart_driver = { 1762 .owner = THIS_MODULE, 1763 .driver_name = "msm_serial", 1764 .dev_name = "ttyMSM", 1765 .nr = MSM_UART_NR, 1766 .cons = MSM_CONSOLE, 1767 }; 1768 1769 static atomic_t msm_uart_next_id = ATOMIC_INIT(0); 1770 1771 static const struct of_device_id msm_uartdm_table[] = { 1772 { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 }, 1773 { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 }, 1774 { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 }, 1775 { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 }, 1776 { } 1777 }; 1778 1779 static int msm_serial_probe(struct platform_device *pdev) 1780 { 1781 struct msm_port *msm_port; 1782 struct resource *resource; 1783 struct uart_port *port; 1784 const struct of_device_id *id; 1785 int irq, line, ret; 1786 1787 if (pdev->dev.of_node) 1788 line = of_alias_get_id(pdev->dev.of_node, "serial"); 1789 else 1790 line = pdev->id; 1791 1792 if (line < 0) 1793 line = atomic_inc_return(&msm_uart_next_id) - 1; 1794 1795 if (unlikely(line < 0 || line >= MSM_UART_NR)) 1796 return -ENXIO; 1797 1798 dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line); 1799 1800 port = msm_get_port_from_line(line); 1801 port->dev = &pdev->dev; 1802 msm_port = to_msm_port(port); 1803 1804 id = of_match_device(msm_uartdm_table, &pdev->dev); 1805 if (id) 1806 msm_port->is_uartdm = (unsigned long)id->data; 1807 else 1808 msm_port->is_uartdm = 0; 1809 1810 msm_port->clk = devm_clk_get(&pdev->dev, "core"); 1811 if (IS_ERR(msm_port->clk)) 1812 return PTR_ERR(msm_port->clk); 1813 1814 if (msm_port->is_uartdm) { 1815 msm_port->pclk = devm_clk_get(&pdev->dev, "iface"); 1816 if (IS_ERR(msm_port->pclk)) 1817 return PTR_ERR(msm_port->pclk); 1818 } 1819 1820 ret = devm_pm_opp_set_clkname(&pdev->dev, "core"); 1821 if (ret) 1822 return ret; 1823 1824 /* OPP table is optional */ 1825 ret = devm_pm_opp_of_add_table(&pdev->dev); 1826 if (ret && ret != -ENODEV) 1827 return dev_err_probe(&pdev->dev, ret, "invalid OPP table\n"); 1828 1829 port->uartclk = clk_get_rate(msm_port->clk); 1830 dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk); 1831 1832 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1833 if (unlikely(!resource)) 1834 return -ENXIO; 1835 port->mapbase = resource->start; 1836 1837 irq = platform_get_irq(pdev, 0); 1838 if (unlikely(irq < 0)) 1839 return -ENXIO; 1840 port->irq = irq; 1841 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE); 1842 1843 platform_set_drvdata(pdev, port); 1844 1845 return uart_add_one_port(&msm_uart_driver, port); 1846 } 1847 1848 static void msm_serial_remove(struct platform_device *pdev) 1849 { 1850 struct uart_port *port = platform_get_drvdata(pdev); 1851 1852 uart_remove_one_port(&msm_uart_driver, port); 1853 } 1854 1855 static const struct of_device_id msm_match_table[] = { 1856 { .compatible = "qcom,msm-uart" }, 1857 { .compatible = "qcom,msm-uartdm" }, 1858 {} 1859 }; 1860 MODULE_DEVICE_TABLE(of, msm_match_table); 1861 1862 static int __maybe_unused msm_serial_suspend(struct device *dev) 1863 { 1864 struct msm_port *port = dev_get_drvdata(dev); 1865 1866 uart_suspend_port(&msm_uart_driver, &port->uart); 1867 1868 return 0; 1869 } 1870 1871 static int __maybe_unused msm_serial_resume(struct device *dev) 1872 { 1873 struct msm_port *port = dev_get_drvdata(dev); 1874 1875 uart_resume_port(&msm_uart_driver, &port->uart); 1876 1877 return 0; 1878 } 1879 1880 static const struct dev_pm_ops msm_serial_dev_pm_ops = { 1881 SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume) 1882 }; 1883 1884 static struct platform_driver msm_platform_driver = { 1885 .remove_new = msm_serial_remove, 1886 .probe = msm_serial_probe, 1887 .driver = { 1888 .name = "msm_serial", 1889 .pm = &msm_serial_dev_pm_ops, 1890 .of_match_table = msm_match_table, 1891 }, 1892 }; 1893 1894 static int __init msm_serial_init(void) 1895 { 1896 int ret; 1897 1898 ret = uart_register_driver(&msm_uart_driver); 1899 if (unlikely(ret)) 1900 return ret; 1901 1902 ret = platform_driver_register(&msm_platform_driver); 1903 if (unlikely(ret)) 1904 uart_unregister_driver(&msm_uart_driver); 1905 1906 pr_info("msm_serial: driver initialized\n"); 1907 1908 return ret; 1909 } 1910 1911 static void __exit msm_serial_exit(void) 1912 { 1913 platform_driver_unregister(&msm_platform_driver); 1914 uart_unregister_driver(&msm_uart_driver); 1915 } 1916 1917 module_init(msm_serial_init); 1918 module_exit(msm_serial_exit); 1919 1920 MODULE_AUTHOR("Robert Love <rlove@google.com>"); 1921 MODULE_DESCRIPTION("Driver for msm7x serial device"); 1922 MODULE_LICENSE("GPL"); 1923