xref: /linux/drivers/tty/serial/men_z135_uart.c (revision 06a691e64b11323a735db3c3bd909d3c0712698f) 
1 /*
2  * MEN 16z135 High Speed UART
3  *
4  * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
5  * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License as published by the Free
9  * Software Foundation; version 2 of the License.
10  */
11 #define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
12 
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/interrupt.h>
16 #include <linux/serial_core.h>
17 #include <linux/ioport.h>
18 #include <linux/io.h>
19 #include <linux/tty_flip.h>
20 #include <linux/bitops.h>
21 #include <linux/mcb.h>
22 
23 #define MEN_Z135_MAX_PORTS		12
24 #define MEN_Z135_BASECLK		29491200
25 #define MEN_Z135_FIFO_SIZE		1024
26 #define MEN_Z135_FIFO_WATERMARK		1020
27 
28 #define MEN_Z135_STAT_REG		0x0
29 #define MEN_Z135_RX_RAM			0x4
30 #define MEN_Z135_TX_RAM			0x400
31 #define MEN_Z135_RX_CTRL		0x800
32 #define MEN_Z135_TX_CTRL		0x804
33 #define MEN_Z135_CONF_REG		0x808
34 #define MEN_Z135_UART_FREQ		0x80c
35 #define MEN_Z135_BAUD_REG		0x810
36 #define MEN_Z135_TIMEOUT		0x814
37 
38 #define IRQ_ID(x) ((x) & 0x1f)
39 
40 #define MEN_Z135_IER_RXCIEN BIT(0)		/* RX Space IRQ */
41 #define MEN_Z135_IER_TXCIEN BIT(1)		/* TX Space IRQ */
42 #define MEN_Z135_IER_RLSIEN BIT(2)		/* Receiver Line Status IRQ */
43 #define MEN_Z135_IER_MSIEN  BIT(3)		/* Modem Status IRQ */
44 #define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN		\
45 				| MEN_Z135_IER_RLSIEN	\
46 				| MEN_Z135_IER_MSIEN	\
47 				| MEN_Z135_IER_TXCIEN)
48 
49 #define MEN_Z135_MCR_DTR	BIT(24)
50 #define MEN_Z135_MCR_RTS	BIT(25)
51 #define MEN_Z135_MCR_OUT1	BIT(26)
52 #define MEN_Z135_MCR_OUT2	BIT(27)
53 #define MEN_Z135_MCR_LOOP	BIT(28)
54 #define MEN_Z135_MCR_RCFC	BIT(29)
55 
56 #define MEN_Z135_MSR_DCTS	BIT(0)
57 #define MEN_Z135_MSR_DDSR	BIT(1)
58 #define MEN_Z135_MSR_DRI	BIT(2)
59 #define MEN_Z135_MSR_DDCD	BIT(3)
60 #define MEN_Z135_MSR_CTS	BIT(4)
61 #define MEN_Z135_MSR_DSR	BIT(5)
62 #define MEN_Z135_MSR_RI		BIT(6)
63 #define MEN_Z135_MSR_DCD	BIT(7)
64 
65 #define MEN_Z135_LCR_SHIFT 8	/* LCR shift mask */
66 
67 #define MEN_Z135_WL5 0		/* CS5 */
68 #define MEN_Z135_WL6 1		/* CS6 */
69 #define MEN_Z135_WL7 2		/* CS7 */
70 #define MEN_Z135_WL8 3		/* CS8 */
71 
72 #define MEN_Z135_STB_SHIFT 2	/* Stopbits */
73 #define MEN_Z135_NSTB1 0
74 #define MEN_Z135_NSTB2 1
75 
76 #define MEN_Z135_PEN_SHIFT 3	/* Parity enable */
77 #define MEN_Z135_PAR_DIS 0
78 #define MEN_Z135_PAR_ENA 1
79 
80 #define MEN_Z135_PTY_SHIFT 4	/* Parity type */
81 #define MEN_Z135_PTY_ODD 0
82 #define MEN_Z135_PTY_EVN 1
83 
84 #define MEN_Z135_LSR_DR BIT(0)
85 #define MEN_Z135_LSR_OE BIT(1)
86 #define MEN_Z135_LSR_PE BIT(2)
87 #define MEN_Z135_LSR_FE BIT(3)
88 #define MEN_Z135_LSR_BI BIT(4)
89 #define MEN_Z135_LSR_THEP BIT(5)
90 #define MEN_Z135_LSR_TEXP BIT(6)
91 #define MEN_Z135_LSR_RXFIFOERR BIT(7)
92 
93 #define MEN_Z135_IRQ_ID_RLS BIT(0)
94 #define MEN_Z135_IRQ_ID_RDA BIT(1)
95 #define MEN_Z135_IRQ_ID_CTI BIT(2)
96 #define MEN_Z135_IRQ_ID_TSA BIT(3)
97 #define MEN_Z135_IRQ_ID_MST BIT(4)
98 
99 #define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
100 
101 #define BYTES_TO_ALIGN(x) ((x) & 0x3)
102 
103 static int line;
104 
105 static int txlvl = 5;
106 module_param(txlvl, int, S_IRUGO);
107 MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)");
108 
109 static int rxlvl = 6;
110 module_param(rxlvl, int, S_IRUGO);
111 MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)");
112 
113 static int align;
114 module_param(align, int, S_IRUGO);
115 MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
116 
117 static uint rx_timeout;
118 module_param(rx_timeout, uint, S_IRUGO);
119 MODULE_PARM_DESC(rx_timeout, "RX timeout. "
120 		"Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg");
121 
122 struct men_z135_port {
123 	struct uart_port port;
124 	struct mcb_device *mdev;
125 	struct resource *mem;
126 	unsigned char *rxbuf;
127 	u32 stat_reg;
128 	spinlock_t lock;
129 	bool automode;
130 };
131 #define to_men_z135(port) container_of((port), struct men_z135_port, port)
132 
133 /**
134  * men_z135_reg_set() - Set value in register
135  * @uart: The UART port
136  * @addr: Register address
137  * @val: value to set
138  */
139 static inline void men_z135_reg_set(struct men_z135_port *uart,
140 				u32 addr, u32 val)
141 {
142 	struct uart_port *port = &uart->port;
143 	unsigned long flags;
144 	u32 reg;
145 
146 	spin_lock_irqsave(&uart->lock, flags);
147 
148 	reg = ioread32(port->membase + addr);
149 	reg |= val;
150 	iowrite32(reg, port->membase + addr);
151 
152 	spin_unlock_irqrestore(&uart->lock, flags);
153 }
154 
155 /**
156  * men_z135_reg_clr() - Unset value in register
157  * @uart: The UART port
158  * @addr: Register address
159  * @val: value to clear
160  */
161 static inline void men_z135_reg_clr(struct men_z135_port *uart,
162 				u32 addr, u32 val)
163 {
164 	struct uart_port *port = &uart->port;
165 	unsigned long flags;
166 	u32 reg;
167 
168 	spin_lock_irqsave(&uart->lock, flags);
169 
170 	reg = ioread32(port->membase + addr);
171 	reg &= ~val;
172 	iowrite32(reg, port->membase + addr);
173 
174 	spin_unlock_irqrestore(&uart->lock, flags);
175 }
176 
177 /**
178  * men_z135_handle_modem_status() - Handle change of modem status
179  * @port: The UART port
180  *
181  * Handle change of modem status register. This is done by reading the "delta"
182  * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
183  */
184 static void men_z135_handle_modem_status(struct men_z135_port *uart)
185 {
186 	u8 msr;
187 
188 	msr = (uart->stat_reg >> 8) & 0xff;
189 
190 	if (msr & MEN_Z135_MSR_DDCD)
191 		uart_handle_dcd_change(&uart->port,
192 				msr & MEN_Z135_MSR_DCD);
193 	if (msr & MEN_Z135_MSR_DCTS)
194 		uart_handle_cts_change(&uart->port,
195 				msr & MEN_Z135_MSR_CTS);
196 }
197 
198 static void men_z135_handle_lsr(struct men_z135_port *uart)
199 {
200 	struct uart_port *port = &uart->port;
201 	u8 lsr;
202 
203 	lsr = (uart->stat_reg >> 16) & 0xff;
204 
205 	if (lsr & MEN_Z135_LSR_OE)
206 		port->icount.overrun++;
207 	if (lsr & MEN_Z135_LSR_PE)
208 		port->icount.parity++;
209 	if (lsr & MEN_Z135_LSR_FE)
210 		port->icount.frame++;
211 	if (lsr & MEN_Z135_LSR_BI) {
212 		port->icount.brk++;
213 		uart_handle_break(port);
214 	}
215 }
216 
217 /**
218  * get_rx_fifo_content() - Get the number of bytes in RX FIFO
219  * @uart: The UART port
220  *
221  * Read RXC register from hardware and return current FIFO fill size.
222  */
223 static u16 get_rx_fifo_content(struct men_z135_port *uart)
224 {
225 	struct uart_port *port = &uart->port;
226 	u32 stat_reg;
227 	u16 rxc;
228 	u8 rxc_lo;
229 	u8 rxc_hi;
230 
231 	stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
232 	rxc_lo = stat_reg >> 24;
233 	rxc_hi = (stat_reg & 0xC0) >> 6;
234 
235 	rxc = rxc_lo | (rxc_hi << 8);
236 
237 	return rxc;
238 }
239 
240 /**
241  * men_z135_handle_rx() - RX tasklet routine
242  * @arg: Pointer to struct men_z135_port
243  *
244  * Copy from RX FIFO and acknowledge number of bytes copied.
245  */
246 static void men_z135_handle_rx(struct men_z135_port *uart)
247 {
248 	struct uart_port *port = &uart->port;
249 	struct tty_port *tport = &port->state->port;
250 	int copied;
251 	u16 size;
252 	int room;
253 
254 	size = get_rx_fifo_content(uart);
255 
256 	if (size == 0)
257 		return;
258 
259 	/* Avoid accidently accessing TX FIFO instead of RX FIFO. Last
260 	 * longword in RX FIFO cannot be read.(0x004-0x3FF)
261 	 */
262 	if (size > MEN_Z135_FIFO_WATERMARK)
263 		size = MEN_Z135_FIFO_WATERMARK;
264 
265 	room = tty_buffer_request_room(tport, size);
266 	if (room != size)
267 		dev_warn(&uart->mdev->dev,
268 			"Not enough room in flip buffer, truncating to %d\n",
269 			room);
270 
271 	if (room == 0)
272 		return;
273 
274 	memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room);
275 	/* Be sure to first copy all data and then acknowledge it */
276 	mb();
277 	iowrite32(room, port->membase +  MEN_Z135_RX_CTRL);
278 
279 	copied = tty_insert_flip_string(tport, uart->rxbuf, room);
280 	if (copied != room)
281 		dev_warn(&uart->mdev->dev,
282 			"Only copied %d instead of %d bytes\n",
283 			copied, room);
284 
285 	port->icount.rx += copied;
286 
287 	tty_flip_buffer_push(tport);
288 
289 }
290 
291 /**
292  * men_z135_handle_tx() - TX tasklet routine
293  * @arg: Pointer to struct men_z135_port
294  *
295  */
296 static void men_z135_handle_tx(struct men_z135_port *uart)
297 {
298 	struct uart_port *port = &uart->port;
299 	struct circ_buf *xmit = &port->state->xmit;
300 	u32 txc;
301 	u32 wptr;
302 	int qlen;
303 	int n;
304 	int txfree;
305 	int head;
306 	int tail;
307 	int s;
308 
309 	if (uart_circ_empty(xmit))
310 		goto out;
311 
312 	if (uart_tx_stopped(port))
313 		goto out;
314 
315 	if (port->x_char)
316 		goto out;
317 
318 	/* calculate bytes to copy */
319 	qlen = uart_circ_chars_pending(xmit);
320 	if (qlen <= 0)
321 		goto out;
322 
323 	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
324 	txc = (wptr >> 16) & 0x3ff;
325 	wptr &= 0x3ff;
326 
327 	if (txc > MEN_Z135_FIFO_WATERMARK)
328 		txc = MEN_Z135_FIFO_WATERMARK;
329 
330 	txfree = MEN_Z135_FIFO_WATERMARK - txc;
331 	if (txfree <= 0) {
332 		dev_err(&uart->mdev->dev,
333 			"Not enough room in TX FIFO have %d, need %d\n",
334 			txfree, qlen);
335 		goto irq_en;
336 	}
337 
338 	/* if we're not aligned, it's better to copy only 1 or 2 bytes and
339 	 * then the rest.
340 	 */
341 	if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr))
342 		n = 4 - BYTES_TO_ALIGN(wptr);
343 	else if (qlen > txfree)
344 		n = txfree;
345 	else
346 		n = qlen;
347 
348 	if (n <= 0)
349 		goto irq_en;
350 
351 	head = xmit->head & (UART_XMIT_SIZE - 1);
352 	tail = xmit->tail & (UART_XMIT_SIZE - 1);
353 
354 	s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
355 	n = min(n, s);
356 
357 	memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
358 	xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1);
359 	mmiowb();
360 
361 	iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
362 
363 	port->icount.tx += n;
364 
365 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
366 		uart_write_wakeup(port);
367 
368 irq_en:
369 	if (!uart_circ_empty(xmit))
370 		men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
371 	else
372 		men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
373 
374 out:
375 	return;
376 
377 }
378 
379 /**
380  * men_z135_intr() - Handle legacy IRQs
381  * @irq: The IRQ number
382  * @data: Pointer to UART port
383  *
384  * Check IIR register to find the cause of the interrupt and handle it.
385  * It is possible that multiple interrupts reason bits are set and reading
386  * the IIR is a destructive read, so we always need to check for all possible
387  * interrupts and handle them.
388  */
389 static irqreturn_t men_z135_intr(int irq, void *data)
390 {
391 	struct men_z135_port *uart = (struct men_z135_port *)data;
392 	struct uart_port *port = &uart->port;
393 	bool handled = false;
394 	int irq_id;
395 
396 	uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
397 	irq_id = IRQ_ID(uart->stat_reg);
398 
399 	if (!irq_id)
400 		goto out;
401 
402 	spin_lock(&port->lock);
403 	/* It's save to write to IIR[7:6] RXC[9:8] */
404 	iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG);
405 
406 	if (irq_id & MEN_Z135_IRQ_ID_RLS) {
407 		men_z135_handle_lsr(uart);
408 		handled = true;
409 	}
410 
411 	if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) {
412 		if (irq_id & MEN_Z135_IRQ_ID_CTI)
413 			dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
414 		men_z135_handle_rx(uart);
415 		handled = true;
416 	}
417 
418 	if (irq_id & MEN_Z135_IRQ_ID_TSA) {
419 		men_z135_handle_tx(uart);
420 		handled = true;
421 	}
422 
423 	if (irq_id & MEN_Z135_IRQ_ID_MST) {
424 		men_z135_handle_modem_status(uart);
425 		handled = true;
426 	}
427 
428 	spin_unlock(&port->lock);
429 out:
430 	return IRQ_RETVAL(handled);
431 }
432 
433 /**
434  * men_z135_request_irq() - Request IRQ for 16z135 core
435  * @uart: z135 private uart port structure
436  *
437  * Request an IRQ for 16z135 to use. First try using MSI, if it fails
438  * fall back to using legacy interrupts.
439  */
440 static int men_z135_request_irq(struct men_z135_port *uart)
441 {
442 	struct device *dev = &uart->mdev->dev;
443 	struct uart_port *port = &uart->port;
444 	int err = 0;
445 
446 	err = request_irq(port->irq, men_z135_intr, IRQF_SHARED,
447 			"men_z135_intr", uart);
448 	if (err)
449 		dev_err(dev, "Error %d getting interrupt\n", err);
450 
451 	return err;
452 }
453 
454 /**
455  * men_z135_tx_empty() - Handle tx_empty call
456  * @port: The UART port
457  *
458  * This function tests whether the TX FIFO and shifter for the port
459  * described by @port is empty.
460  */
461 static unsigned int men_z135_tx_empty(struct uart_port *port)
462 {
463 	u32 wptr;
464 	u16 txc;
465 
466 	wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
467 	txc = (wptr >> 16) & 0x3ff;
468 
469 	if (txc == 0)
470 		return TIOCSER_TEMT;
471 	else
472 		return 0;
473 }
474 
475 /**
476  * men_z135_set_mctrl() - Set modem control lines
477  * @port: The UART port
478  * @mctrl: The modem control lines
479  *
480  * This function sets the modem control lines for a port described by @port
481  * to the state described by @mctrl
482  */
483 static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
484 {
485 	u32 old;
486 	u32 conf_reg;
487 
488 	conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG);
489 	if (mctrl & TIOCM_RTS)
490 		conf_reg |= MEN_Z135_MCR_RTS;
491 	else
492 		conf_reg &= ~MEN_Z135_MCR_RTS;
493 
494 	if (mctrl & TIOCM_DTR)
495 		conf_reg |= MEN_Z135_MCR_DTR;
496 	else
497 		conf_reg &= ~MEN_Z135_MCR_DTR;
498 
499 	if (mctrl & TIOCM_OUT1)
500 		conf_reg |= MEN_Z135_MCR_OUT1;
501 	else
502 		conf_reg &= ~MEN_Z135_MCR_OUT1;
503 
504 	if (mctrl & TIOCM_OUT2)
505 		conf_reg |= MEN_Z135_MCR_OUT2;
506 	else
507 		conf_reg &= ~MEN_Z135_MCR_OUT2;
508 
509 	if (mctrl & TIOCM_LOOP)
510 		conf_reg |= MEN_Z135_MCR_LOOP;
511 	else
512 		conf_reg &= ~MEN_Z135_MCR_LOOP;
513 
514 	if (conf_reg != old)
515 		iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
516 }
517 
518 /**
519  * men_z135_get_mctrl() - Get modem control lines
520  * @port: The UART port
521  *
522  * Retruns the current state of modem control inputs.
523  */
524 static unsigned int men_z135_get_mctrl(struct uart_port *port)
525 {
526 	unsigned int mctrl = 0;
527 	u8 msr;
528 
529 	msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1);
530 
531 	if (msr & MEN_Z135_MSR_CTS)
532 		mctrl |= TIOCM_CTS;
533 	if (msr & MEN_Z135_MSR_DSR)
534 		mctrl |= TIOCM_DSR;
535 	if (msr & MEN_Z135_MSR_RI)
536 		mctrl |= TIOCM_RI;
537 	if (msr & MEN_Z135_MSR_DCD)
538 		mctrl |= TIOCM_CAR;
539 
540 	return mctrl;
541 }
542 
543 /**
544  * men_z135_stop_tx() - Stop transmitting characters
545  * @port: The UART port
546  *
547  * Stop transmitting characters. This might be due to CTS line becomming
548  * inactive or the tty layer indicating we want to stop transmission due to
549  * an XOFF character.
550  */
551 static void men_z135_stop_tx(struct uart_port *port)
552 {
553 	struct men_z135_port *uart = to_men_z135(port);
554 
555 	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
556 }
557 
558 /*
559  * men_z135_disable_ms() - Disable Modem Status
560  * port: The UART port
561  *
562  * Enable Modem Status IRQ.
563  */
564 static void men_z135_disable_ms(struct uart_port *port)
565 {
566 	struct men_z135_port *uart = to_men_z135(port);
567 
568 	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
569 }
570 
571 /**
572  * men_z135_start_tx() - Start transmitting characters
573  * @port: The UART port
574  *
575  * Start transmitting character. This actually doesn't transmit anything, but
576  * fires off the TX tasklet.
577  */
578 static void men_z135_start_tx(struct uart_port *port)
579 {
580 	struct men_z135_port *uart = to_men_z135(port);
581 
582 	if (uart->automode)
583 		men_z135_disable_ms(port);
584 
585 	men_z135_handle_tx(uart);
586 }
587 
588 /**
589  * men_z135_stop_rx() - Stop receiving characters
590  * @port: The UART port
591  *
592  * Stop receiving characters; the port is in the process of being closed.
593  */
594 static void men_z135_stop_rx(struct uart_port *port)
595 {
596 	struct men_z135_port *uart = to_men_z135(port);
597 
598 	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN);
599 }
600 
601 /**
602  * men_z135_enable_ms() - Enable Modem Status
603  * port:
604  *
605  * Enable Modem Status IRQ.
606  */
607 static void men_z135_enable_ms(struct uart_port *port)
608 {
609 	struct men_z135_port *uart = to_men_z135(port);
610 
611 	men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
612 }
613 
614 static int men_z135_startup(struct uart_port *port)
615 {
616 	struct men_z135_port *uart = to_men_z135(port);
617 	int err;
618 	u32 conf_reg = 0;
619 
620 	err = men_z135_request_irq(uart);
621 	if (err)
622 		return -ENODEV;
623 
624 	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
625 
626 	/* Activate all but TX space available IRQ */
627 	conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN;
628 	conf_reg &= ~(0xff << 16);
629 	conf_reg |= (txlvl << 16);
630 	conf_reg |= (rxlvl << 20);
631 
632 	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
633 
634 	if (rx_timeout)
635 		iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT);
636 
637 	return 0;
638 }
639 
640 static void men_z135_shutdown(struct uart_port *port)
641 {
642 	struct men_z135_port *uart = to_men_z135(port);
643 	u32 conf_reg = 0;
644 
645 	conf_reg |= MEN_Z135_ALL_IRQS;
646 
647 	men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg);
648 
649 	free_irq(uart->port.irq, uart);
650 }
651 
652 static void men_z135_set_termios(struct uart_port *port,
653 				struct ktermios *termios,
654 				struct ktermios *old)
655 {
656 	struct men_z135_port *uart = to_men_z135(port);
657 	unsigned int baud;
658 	u32 conf_reg;
659 	u32 bd_reg;
660 	u32 uart_freq;
661 	u8 lcr;
662 
663 	conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
664 	lcr = LCR(conf_reg);
665 
666 	/* byte size */
667 	switch (termios->c_cflag & CSIZE) {
668 	case CS5:
669 		lcr |= MEN_Z135_WL5;
670 		break;
671 	case CS6:
672 		lcr |= MEN_Z135_WL6;
673 		break;
674 	case CS7:
675 		lcr |= MEN_Z135_WL7;
676 		break;
677 	case CS8:
678 		lcr |= MEN_Z135_WL8;
679 		break;
680 	}
681 
682 	/* stop bits */
683 	if (termios->c_cflag & CSTOPB)
684 		lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT;
685 
686 	/* parity */
687 	if (termios->c_cflag & PARENB) {
688 		lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT;
689 
690 		if (termios->c_cflag & PARODD)
691 			lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT;
692 		else
693 			lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT;
694 	} else
695 		lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
696 
697 	conf_reg |= MEN_Z135_IER_MSIEN;
698 	if (termios->c_cflag & CRTSCTS) {
699 		conf_reg |= MEN_Z135_MCR_RCFC;
700 		uart->automode = true;
701 		termios->c_cflag &= ~CLOCAL;
702 	} else {
703 		conf_reg &= ~MEN_Z135_MCR_RCFC;
704 		uart->automode = false;
705 	}
706 
707 	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
708 
709 	conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
710 	iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
711 
712 	uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ);
713 	if (uart_freq == 0)
714 		uart_freq = MEN_Z135_BASECLK;
715 
716 	baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
717 
718 	spin_lock_irq(&port->lock);
719 	if (tty_termios_baud_rate(termios))
720 		tty_termios_encode_baud_rate(termios, baud, baud);
721 
722 	bd_reg = uart_freq / (4 * baud);
723 	iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
724 
725 	uart_update_timeout(port, termios->c_cflag, baud);
726 	spin_unlock_irq(&port->lock);
727 }
728 
729 static const char *men_z135_type(struct uart_port *port)
730 {
731 	return KBUILD_MODNAME;
732 }
733 
734 static void men_z135_release_port(struct uart_port *port)
735 {
736 	struct men_z135_port *uart = to_men_z135(port);
737 
738 	iounmap(port->membase);
739 	port->membase = NULL;
740 
741 	mcb_release_mem(uart->mem);
742 }
743 
744 static int men_z135_request_port(struct uart_port *port)
745 {
746 	struct men_z135_port *uart = to_men_z135(port);
747 	struct mcb_device *mdev = uart->mdev;
748 	struct resource *mem;
749 
750 	mem = mcb_request_mem(uart->mdev, dev_name(&mdev->dev));
751 	if (IS_ERR(mem))
752 		return PTR_ERR(mem);
753 
754 	port->mapbase = mem->start;
755 	uart->mem = mem;
756 
757 	port->membase = ioremap(mem->start, resource_size(mem));
758 	if (port->membase == NULL) {
759 		mcb_release_mem(mem);
760 		return -ENOMEM;
761 	}
762 
763 	return 0;
764 }
765 
766 static void men_z135_config_port(struct uart_port *port, int type)
767 {
768 	port->type = PORT_MEN_Z135;
769 	men_z135_request_port(port);
770 }
771 
772 static int men_z135_verify_port(struct uart_port *port,
773 				struct serial_struct *serinfo)
774 {
775 	return -EINVAL;
776 }
777 
778 static struct uart_ops men_z135_ops = {
779 	.tx_empty = men_z135_tx_empty,
780 	.set_mctrl = men_z135_set_mctrl,
781 	.get_mctrl = men_z135_get_mctrl,
782 	.stop_tx = men_z135_stop_tx,
783 	.start_tx = men_z135_start_tx,
784 	.stop_rx = men_z135_stop_rx,
785 	.enable_ms = men_z135_enable_ms,
786 	.startup = men_z135_startup,
787 	.shutdown = men_z135_shutdown,
788 	.set_termios = men_z135_set_termios,
789 	.type = men_z135_type,
790 	.release_port = men_z135_release_port,
791 	.request_port = men_z135_request_port,
792 	.config_port = men_z135_config_port,
793 	.verify_port = men_z135_verify_port,
794 };
795 
796 static struct uart_driver men_z135_driver = {
797 	.owner = THIS_MODULE,
798 	.driver_name = KBUILD_MODNAME,
799 	.dev_name = "ttyHSU",
800 	.major = 0,
801 	.minor = 0,
802 	.nr = MEN_Z135_MAX_PORTS,
803 };
804 
805 /**
806  * men_z135_probe() - Probe a z135 instance
807  * @mdev: The MCB device
808  * @id: The MCB device ID
809  *
810  * men_z135_probe does the basic setup of hardware resources and registers the
811  * new uart port to the tty layer.
812  */
813 static int men_z135_probe(struct mcb_device *mdev,
814 			const struct mcb_device_id *id)
815 {
816 	struct men_z135_port *uart;
817 	struct resource *mem;
818 	struct device *dev;
819 	int err;
820 
821 	dev = &mdev->dev;
822 
823 	uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL);
824 	if (!uart)
825 		return -ENOMEM;
826 
827 	uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
828 	if (!uart->rxbuf)
829 		return -ENOMEM;
830 
831 	mem = &mdev->mem;
832 
833 	mcb_set_drvdata(mdev, uart);
834 
835 	uart->port.uartclk = MEN_Z135_BASECLK * 16;
836 	uart->port.fifosize = MEN_Z135_FIFO_SIZE;
837 	uart->port.iotype = UPIO_MEM;
838 	uart->port.ops = &men_z135_ops;
839 	uart->port.irq = mcb_get_irq(mdev);
840 	uart->port.iotype = UPIO_MEM;
841 	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
842 	uart->port.line = line++;
843 	uart->port.dev = dev;
844 	uart->port.type = PORT_MEN_Z135;
845 	uart->port.mapbase = mem->start;
846 	uart->port.membase = NULL;
847 	uart->mdev = mdev;
848 
849 	spin_lock_init(&uart->lock);
850 
851 	err = uart_add_one_port(&men_z135_driver, &uart->port);
852 	if (err)
853 		goto err;
854 
855 	return 0;
856 
857 err:
858 	free_page((unsigned long) uart->rxbuf);
859 	dev_err(dev, "Failed to add UART: %d\n", err);
860 
861 	return err;
862 }
863 
864 /**
865  * men_z135_remove() - Remove a z135 instance from the system
866  *
867  * @mdev: The MCB device
868  */
869 static void men_z135_remove(struct mcb_device *mdev)
870 {
871 	struct men_z135_port *uart = mcb_get_drvdata(mdev);
872 
873 	line--;
874 	uart_remove_one_port(&men_z135_driver, &uart->port);
875 	free_page((unsigned long) uart->rxbuf);
876 }
877 
878 static const struct mcb_device_id men_z135_ids[] = {
879 	{ .device = 0x87 },
880 	{ }
881 };
882 MODULE_DEVICE_TABLE(mcb, men_z135_ids);
883 
884 static struct mcb_driver mcb_driver = {
885 	.driver = {
886 		.name = "z135-uart",
887 		.owner = THIS_MODULE,
888 	},
889 	.probe = men_z135_probe,
890 	.remove = men_z135_remove,
891 	.id_table = men_z135_ids,
892 };
893 
894 /**
895  * men_z135_init() - Driver Registration Routine
896  *
897  * men_z135_init is the first routine called when the driver is loaded. All it
898  * does is register with the legacy MEN Chameleon subsystem.
899  */
900 static int __init men_z135_init(void)
901 {
902 	int err;
903 
904 	err = uart_register_driver(&men_z135_driver);
905 	if (err) {
906 		pr_err("Failed to register UART: %d\n", err);
907 		return err;
908 	}
909 
910 	err = mcb_register_driver(&mcb_driver);
911 	if  (err) {
912 		pr_err("Failed to register MCB driver: %d\n", err);
913 		uart_unregister_driver(&men_z135_driver);
914 		return err;
915 	}
916 
917 	return 0;
918 }
919 module_init(men_z135_init);
920 
921 /**
922  * men_z135_exit() - Driver Exit Routine
923  *
924  * men_z135_exit is called just before the driver is removed from memory.
925  */
926 static void __exit men_z135_exit(void)
927 {
928 	mcb_unregister_driver(&mcb_driver);
929 	uart_unregister_driver(&men_z135_driver);
930 }
931 module_exit(men_z135_exit);
932 
933 MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
934 MODULE_LICENSE("GPL v2");
935 MODULE_DESCRIPTION("MEN 16z135 High Speed UART");
936 MODULE_ALIAS("mcb:16z135");
937