1 /* 2 * Freescale lpuart serial port driver 3 * 4 * Copyright 2012-2014 Freescale Semiconductor, Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 */ 11 12 #if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) 13 #define SUPPORT_SYSRQ 14 #endif 15 16 #include <linux/clk.h> 17 #include <linux/console.h> 18 #include <linux/dma-mapping.h> 19 #include <linux/dmaengine.h> 20 #include <linux/dmapool.h> 21 #include <linux/io.h> 22 #include <linux/irq.h> 23 #include <linux/module.h> 24 #include <linux/of.h> 25 #include <linux/of_device.h> 26 #include <linux/of_dma.h> 27 #include <linux/serial_core.h> 28 #include <linux/slab.h> 29 #include <linux/tty_flip.h> 30 31 /* All registers are 8-bit width */ 32 #define UARTBDH 0x00 33 #define UARTBDL 0x01 34 #define UARTCR1 0x02 35 #define UARTCR2 0x03 36 #define UARTSR1 0x04 37 #define UARTCR3 0x06 38 #define UARTDR 0x07 39 #define UARTCR4 0x0a 40 #define UARTCR5 0x0b 41 #define UARTMODEM 0x0d 42 #define UARTPFIFO 0x10 43 #define UARTCFIFO 0x11 44 #define UARTSFIFO 0x12 45 #define UARTTWFIFO 0x13 46 #define UARTTCFIFO 0x14 47 #define UARTRWFIFO 0x15 48 49 #define UARTBDH_LBKDIE 0x80 50 #define UARTBDH_RXEDGIE 0x40 51 #define UARTBDH_SBR_MASK 0x1f 52 53 #define UARTCR1_LOOPS 0x80 54 #define UARTCR1_RSRC 0x20 55 #define UARTCR1_M 0x10 56 #define UARTCR1_WAKE 0x08 57 #define UARTCR1_ILT 0x04 58 #define UARTCR1_PE 0x02 59 #define UARTCR1_PT 0x01 60 61 #define UARTCR2_TIE 0x80 62 #define UARTCR2_TCIE 0x40 63 #define UARTCR2_RIE 0x20 64 #define UARTCR2_ILIE 0x10 65 #define UARTCR2_TE 0x08 66 #define UARTCR2_RE 0x04 67 #define UARTCR2_RWU 0x02 68 #define UARTCR2_SBK 0x01 69 70 #define UARTSR1_TDRE 0x80 71 #define UARTSR1_TC 0x40 72 #define UARTSR1_RDRF 0x20 73 #define UARTSR1_IDLE 0x10 74 #define UARTSR1_OR 0x08 75 #define UARTSR1_NF 0x04 76 #define UARTSR1_FE 0x02 77 #define UARTSR1_PE 0x01 78 79 #define UARTCR3_R8 0x80 80 #define UARTCR3_T8 0x40 81 #define UARTCR3_TXDIR 0x20 82 #define UARTCR3_TXINV 0x10 83 #define UARTCR3_ORIE 0x08 84 #define UARTCR3_NEIE 0x04 85 #define UARTCR3_FEIE 0x02 86 #define UARTCR3_PEIE 0x01 87 88 #define UARTCR4_MAEN1 0x80 89 #define UARTCR4_MAEN2 0x40 90 #define UARTCR4_M10 0x20 91 #define UARTCR4_BRFA_MASK 0x1f 92 #define UARTCR4_BRFA_OFF 0 93 94 #define UARTCR5_TDMAS 0x80 95 #define UARTCR5_RDMAS 0x20 96 97 #define UARTMODEM_RXRTSE 0x08 98 #define UARTMODEM_TXRTSPOL 0x04 99 #define UARTMODEM_TXRTSE 0x02 100 #define UARTMODEM_TXCTSE 0x01 101 102 #define UARTPFIFO_TXFE 0x80 103 #define UARTPFIFO_FIFOSIZE_MASK 0x7 104 #define UARTPFIFO_TXSIZE_OFF 4 105 #define UARTPFIFO_RXFE 0x08 106 #define UARTPFIFO_RXSIZE_OFF 0 107 108 #define UARTCFIFO_TXFLUSH 0x80 109 #define UARTCFIFO_RXFLUSH 0x40 110 #define UARTCFIFO_RXOFE 0x04 111 #define UARTCFIFO_TXOFE 0x02 112 #define UARTCFIFO_RXUFE 0x01 113 114 #define UARTSFIFO_TXEMPT 0x80 115 #define UARTSFIFO_RXEMPT 0x40 116 #define UARTSFIFO_RXOF 0x04 117 #define UARTSFIFO_TXOF 0x02 118 #define UARTSFIFO_RXUF 0x01 119 120 /* 32-bit register defination */ 121 #define UARTBAUD 0x00 122 #define UARTSTAT 0x04 123 #define UARTCTRL 0x08 124 #define UARTDATA 0x0C 125 #define UARTMATCH 0x10 126 #define UARTMODIR 0x14 127 #define UARTFIFO 0x18 128 #define UARTWATER 0x1c 129 130 #define UARTBAUD_MAEN1 0x80000000 131 #define UARTBAUD_MAEN2 0x40000000 132 #define UARTBAUD_M10 0x20000000 133 #define UARTBAUD_TDMAE 0x00800000 134 #define UARTBAUD_RDMAE 0x00200000 135 #define UARTBAUD_MATCFG 0x00400000 136 #define UARTBAUD_BOTHEDGE 0x00020000 137 #define UARTBAUD_RESYNCDIS 0x00010000 138 #define UARTBAUD_LBKDIE 0x00008000 139 #define UARTBAUD_RXEDGIE 0x00004000 140 #define UARTBAUD_SBNS 0x00002000 141 #define UARTBAUD_SBR 0x00000000 142 #define UARTBAUD_SBR_MASK 0x1fff 143 144 #define UARTSTAT_LBKDIF 0x80000000 145 #define UARTSTAT_RXEDGIF 0x40000000 146 #define UARTSTAT_MSBF 0x20000000 147 #define UARTSTAT_RXINV 0x10000000 148 #define UARTSTAT_RWUID 0x08000000 149 #define UARTSTAT_BRK13 0x04000000 150 #define UARTSTAT_LBKDE 0x02000000 151 #define UARTSTAT_RAF 0x01000000 152 #define UARTSTAT_TDRE 0x00800000 153 #define UARTSTAT_TC 0x00400000 154 #define UARTSTAT_RDRF 0x00200000 155 #define UARTSTAT_IDLE 0x00100000 156 #define UARTSTAT_OR 0x00080000 157 #define UARTSTAT_NF 0x00040000 158 #define UARTSTAT_FE 0x00020000 159 #define UARTSTAT_PE 0x00010000 160 #define UARTSTAT_MA1F 0x00008000 161 #define UARTSTAT_M21F 0x00004000 162 163 #define UARTCTRL_R8T9 0x80000000 164 #define UARTCTRL_R9T8 0x40000000 165 #define UARTCTRL_TXDIR 0x20000000 166 #define UARTCTRL_TXINV 0x10000000 167 #define UARTCTRL_ORIE 0x08000000 168 #define UARTCTRL_NEIE 0x04000000 169 #define UARTCTRL_FEIE 0x02000000 170 #define UARTCTRL_PEIE 0x01000000 171 #define UARTCTRL_TIE 0x00800000 172 #define UARTCTRL_TCIE 0x00400000 173 #define UARTCTRL_RIE 0x00200000 174 #define UARTCTRL_ILIE 0x00100000 175 #define UARTCTRL_TE 0x00080000 176 #define UARTCTRL_RE 0x00040000 177 #define UARTCTRL_RWU 0x00020000 178 #define UARTCTRL_SBK 0x00010000 179 #define UARTCTRL_MA1IE 0x00008000 180 #define UARTCTRL_MA2IE 0x00004000 181 #define UARTCTRL_IDLECFG 0x00000100 182 #define UARTCTRL_LOOPS 0x00000080 183 #define UARTCTRL_DOZEEN 0x00000040 184 #define UARTCTRL_RSRC 0x00000020 185 #define UARTCTRL_M 0x00000010 186 #define UARTCTRL_WAKE 0x00000008 187 #define UARTCTRL_ILT 0x00000004 188 #define UARTCTRL_PE 0x00000002 189 #define UARTCTRL_PT 0x00000001 190 191 #define UARTDATA_NOISY 0x00008000 192 #define UARTDATA_PARITYE 0x00004000 193 #define UARTDATA_FRETSC 0x00002000 194 #define UARTDATA_RXEMPT 0x00001000 195 #define UARTDATA_IDLINE 0x00000800 196 #define UARTDATA_MASK 0x3ff 197 198 #define UARTMODIR_IREN 0x00020000 199 #define UARTMODIR_TXCTSSRC 0x00000020 200 #define UARTMODIR_TXCTSC 0x00000010 201 #define UARTMODIR_RXRTSE 0x00000008 202 #define UARTMODIR_TXRTSPOL 0x00000004 203 #define UARTMODIR_TXRTSE 0x00000002 204 #define UARTMODIR_TXCTSE 0x00000001 205 206 #define UARTFIFO_TXEMPT 0x00800000 207 #define UARTFIFO_RXEMPT 0x00400000 208 #define UARTFIFO_TXOF 0x00020000 209 #define UARTFIFO_RXUF 0x00010000 210 #define UARTFIFO_TXFLUSH 0x00008000 211 #define UARTFIFO_RXFLUSH 0x00004000 212 #define UARTFIFO_TXOFE 0x00000200 213 #define UARTFIFO_RXUFE 0x00000100 214 #define UARTFIFO_TXFE 0x00000080 215 #define UARTFIFO_FIFOSIZE_MASK 0x7 216 #define UARTFIFO_TXSIZE_OFF 4 217 #define UARTFIFO_RXFE 0x00000008 218 #define UARTFIFO_RXSIZE_OFF 0 219 220 #define UARTWATER_COUNT_MASK 0xff 221 #define UARTWATER_TXCNT_OFF 8 222 #define UARTWATER_RXCNT_OFF 24 223 #define UARTWATER_WATER_MASK 0xff 224 #define UARTWATER_TXWATER_OFF 0 225 #define UARTWATER_RXWATER_OFF 16 226 227 #define FSL_UART_RX_DMA_BUFFER_SIZE 64 228 229 #define DRIVER_NAME "fsl-lpuart" 230 #define DEV_NAME "ttyLP" 231 #define UART_NR 6 232 233 struct lpuart_port { 234 struct uart_port port; 235 struct clk *clk; 236 unsigned int txfifo_size; 237 unsigned int rxfifo_size; 238 bool lpuart32; 239 240 bool lpuart_dma_tx_use; 241 bool lpuart_dma_rx_use; 242 struct dma_chan *dma_tx_chan; 243 struct dma_chan *dma_rx_chan; 244 struct dma_async_tx_descriptor *dma_tx_desc; 245 struct dma_async_tx_descriptor *dma_rx_desc; 246 dma_addr_t dma_tx_buf_bus; 247 dma_addr_t dma_rx_buf_bus; 248 dma_cookie_t dma_tx_cookie; 249 dma_cookie_t dma_rx_cookie; 250 unsigned char *dma_tx_buf_virt; 251 unsigned char *dma_rx_buf_virt; 252 unsigned int dma_tx_bytes; 253 unsigned int dma_rx_bytes; 254 int dma_tx_in_progress; 255 int dma_rx_in_progress; 256 unsigned int dma_rx_timeout; 257 struct timer_list lpuart_timer; 258 }; 259 260 static const struct of_device_id lpuart_dt_ids[] = { 261 { 262 .compatible = "fsl,vf610-lpuart", 263 }, 264 { 265 .compatible = "fsl,ls1021a-lpuart", 266 }, 267 { /* sentinel */ } 268 }; 269 MODULE_DEVICE_TABLE(of, lpuart_dt_ids); 270 271 /* Forward declare this for the dma callbacks*/ 272 static void lpuart_dma_tx_complete(void *arg); 273 static void lpuart_dma_rx_complete(void *arg); 274 275 static u32 lpuart32_read(void __iomem *addr) 276 { 277 return ioread32be(addr); 278 } 279 280 static void lpuart32_write(u32 val, void __iomem *addr) 281 { 282 iowrite32be(val, addr); 283 } 284 285 static void lpuart_stop_tx(struct uart_port *port) 286 { 287 unsigned char temp; 288 289 temp = readb(port->membase + UARTCR2); 290 temp &= ~(UARTCR2_TIE | UARTCR2_TCIE); 291 writeb(temp, port->membase + UARTCR2); 292 } 293 294 static void lpuart32_stop_tx(struct uart_port *port) 295 { 296 unsigned long temp; 297 298 temp = lpuart32_read(port->membase + UARTCTRL); 299 temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); 300 lpuart32_write(temp, port->membase + UARTCTRL); 301 } 302 303 static void lpuart_stop_rx(struct uart_port *port) 304 { 305 unsigned char temp; 306 307 temp = readb(port->membase + UARTCR2); 308 writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2); 309 } 310 311 static void lpuart32_stop_rx(struct uart_port *port) 312 { 313 unsigned long temp; 314 315 temp = lpuart32_read(port->membase + UARTCTRL); 316 lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL); 317 } 318 319 static void lpuart_copy_rx_to_tty(struct lpuart_port *sport, 320 struct tty_port *tty, int count) 321 { 322 int copied; 323 324 sport->port.icount.rx += count; 325 326 if (!tty) { 327 dev_err(sport->port.dev, "No tty port\n"); 328 return; 329 } 330 331 dma_sync_single_for_cpu(sport->port.dev, sport->dma_rx_buf_bus, 332 FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); 333 copied = tty_insert_flip_string(tty, 334 ((unsigned char *)(sport->dma_rx_buf_virt)), count); 335 336 if (copied != count) { 337 WARN_ON(1); 338 dev_err(sport->port.dev, "RxData copy to tty layer failed\n"); 339 } 340 341 dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, 342 FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); 343 } 344 345 static void lpuart_pio_tx(struct lpuart_port *sport) 346 { 347 struct circ_buf *xmit = &sport->port.state->xmit; 348 unsigned long flags; 349 350 spin_lock_irqsave(&sport->port.lock, flags); 351 352 while (!uart_circ_empty(xmit) && 353 readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size) { 354 writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); 355 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 356 sport->port.icount.tx++; 357 } 358 359 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 360 uart_write_wakeup(&sport->port); 361 362 if (uart_circ_empty(xmit)) 363 writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, 364 sport->port.membase + UARTCR5); 365 366 spin_unlock_irqrestore(&sport->port.lock, flags); 367 } 368 369 static int lpuart_dma_tx(struct lpuart_port *sport, unsigned long count) 370 { 371 struct circ_buf *xmit = &sport->port.state->xmit; 372 dma_addr_t tx_bus_addr; 373 374 dma_sync_single_for_device(sport->port.dev, sport->dma_tx_buf_bus, 375 UART_XMIT_SIZE, DMA_TO_DEVICE); 376 sport->dma_tx_bytes = count & ~(sport->txfifo_size - 1); 377 tx_bus_addr = sport->dma_tx_buf_bus + xmit->tail; 378 sport->dma_tx_desc = dmaengine_prep_slave_single(sport->dma_tx_chan, 379 tx_bus_addr, sport->dma_tx_bytes, 380 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); 381 382 if (!sport->dma_tx_desc) { 383 dev_err(sport->port.dev, "Not able to get desc for tx\n"); 384 return -EIO; 385 } 386 387 sport->dma_tx_desc->callback = lpuart_dma_tx_complete; 388 sport->dma_tx_desc->callback_param = sport; 389 sport->dma_tx_in_progress = 1; 390 sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc); 391 dma_async_issue_pending(sport->dma_tx_chan); 392 393 return 0; 394 } 395 396 static void lpuart_prepare_tx(struct lpuart_port *sport) 397 { 398 struct circ_buf *xmit = &sport->port.state->xmit; 399 unsigned long count = CIRC_CNT_TO_END(xmit->head, 400 xmit->tail, UART_XMIT_SIZE); 401 402 if (!count) 403 return; 404 405 if (count < sport->txfifo_size) 406 writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_TDMAS, 407 sport->port.membase + UARTCR5); 408 else { 409 writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_TDMAS, 410 sport->port.membase + UARTCR5); 411 lpuart_dma_tx(sport, count); 412 } 413 } 414 415 static void lpuart_dma_tx_complete(void *arg) 416 { 417 struct lpuart_port *sport = arg; 418 struct circ_buf *xmit = &sport->port.state->xmit; 419 unsigned long flags; 420 421 async_tx_ack(sport->dma_tx_desc); 422 423 spin_lock_irqsave(&sport->port.lock, flags); 424 425 xmit->tail = (xmit->tail + sport->dma_tx_bytes) & (UART_XMIT_SIZE - 1); 426 sport->dma_tx_in_progress = 0; 427 428 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 429 uart_write_wakeup(&sport->port); 430 431 lpuart_prepare_tx(sport); 432 433 spin_unlock_irqrestore(&sport->port.lock, flags); 434 } 435 436 static int lpuart_dma_rx(struct lpuart_port *sport) 437 { 438 dma_sync_single_for_device(sport->port.dev, sport->dma_rx_buf_bus, 439 FSL_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE); 440 sport->dma_rx_desc = dmaengine_prep_slave_single(sport->dma_rx_chan, 441 sport->dma_rx_buf_bus, FSL_UART_RX_DMA_BUFFER_SIZE, 442 DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); 443 444 if (!sport->dma_rx_desc) { 445 dev_err(sport->port.dev, "Not able to get desc for rx\n"); 446 return -EIO; 447 } 448 449 sport->dma_rx_desc->callback = lpuart_dma_rx_complete; 450 sport->dma_rx_desc->callback_param = sport; 451 sport->dma_rx_in_progress = 1; 452 sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc); 453 dma_async_issue_pending(sport->dma_rx_chan); 454 455 return 0; 456 } 457 458 static void lpuart_flush_buffer(struct uart_port *port) 459 { 460 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 461 if (sport->lpuart_dma_tx_use) { 462 dmaengine_terminate_all(sport->dma_tx_chan); 463 sport->dma_tx_in_progress = 0; 464 } 465 } 466 467 static void lpuart_dma_rx_complete(void *arg) 468 { 469 struct lpuart_port *sport = arg; 470 struct tty_port *port = &sport->port.state->port; 471 unsigned long flags; 472 473 async_tx_ack(sport->dma_rx_desc); 474 mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout); 475 476 spin_lock_irqsave(&sport->port.lock, flags); 477 478 sport->dma_rx_in_progress = 0; 479 lpuart_copy_rx_to_tty(sport, port, FSL_UART_RX_DMA_BUFFER_SIZE); 480 tty_flip_buffer_push(port); 481 lpuart_dma_rx(sport); 482 483 spin_unlock_irqrestore(&sport->port.lock, flags); 484 } 485 486 static void lpuart_timer_func(unsigned long data) 487 { 488 struct lpuart_port *sport = (struct lpuart_port *)data; 489 struct tty_port *port = &sport->port.state->port; 490 struct dma_tx_state state; 491 unsigned long flags; 492 unsigned char temp; 493 int count; 494 495 del_timer(&sport->lpuart_timer); 496 dmaengine_pause(sport->dma_rx_chan); 497 dmaengine_tx_status(sport->dma_rx_chan, sport->dma_rx_cookie, &state); 498 dmaengine_terminate_all(sport->dma_rx_chan); 499 count = FSL_UART_RX_DMA_BUFFER_SIZE - state.residue; 500 async_tx_ack(sport->dma_rx_desc); 501 502 spin_lock_irqsave(&sport->port.lock, flags); 503 504 sport->dma_rx_in_progress = 0; 505 lpuart_copy_rx_to_tty(sport, port, count); 506 tty_flip_buffer_push(port); 507 temp = readb(sport->port.membase + UARTCR5); 508 writeb(temp & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5); 509 510 spin_unlock_irqrestore(&sport->port.lock, flags); 511 } 512 513 static inline void lpuart_prepare_rx(struct lpuart_port *sport) 514 { 515 unsigned long flags; 516 unsigned char temp; 517 518 spin_lock_irqsave(&sport->port.lock, flags); 519 520 sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; 521 add_timer(&sport->lpuart_timer); 522 523 lpuart_dma_rx(sport); 524 temp = readb(sport->port.membase + UARTCR5); 525 writeb(temp | UARTCR5_RDMAS, sport->port.membase + UARTCR5); 526 527 spin_unlock_irqrestore(&sport->port.lock, flags); 528 } 529 530 static inline void lpuart_transmit_buffer(struct lpuart_port *sport) 531 { 532 struct circ_buf *xmit = &sport->port.state->xmit; 533 534 while (!uart_circ_empty(xmit) && 535 (readb(sport->port.membase + UARTTCFIFO) < sport->txfifo_size)) { 536 writeb(xmit->buf[xmit->tail], sport->port.membase + UARTDR); 537 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 538 sport->port.icount.tx++; 539 } 540 541 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 542 uart_write_wakeup(&sport->port); 543 544 if (uart_circ_empty(xmit)) 545 lpuart_stop_tx(&sport->port); 546 } 547 548 static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) 549 { 550 struct circ_buf *xmit = &sport->port.state->xmit; 551 unsigned long txcnt; 552 553 txcnt = lpuart32_read(sport->port.membase + UARTWATER); 554 txcnt = txcnt >> UARTWATER_TXCNT_OFF; 555 txcnt &= UARTWATER_COUNT_MASK; 556 while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { 557 lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA); 558 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); 559 sport->port.icount.tx++; 560 txcnt = lpuart32_read(sport->port.membase + UARTWATER); 561 txcnt = txcnt >> UARTWATER_TXCNT_OFF; 562 txcnt &= UARTWATER_COUNT_MASK; 563 } 564 565 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 566 uart_write_wakeup(&sport->port); 567 568 if (uart_circ_empty(xmit)) 569 lpuart32_stop_tx(&sport->port); 570 } 571 572 static void lpuart_start_tx(struct uart_port *port) 573 { 574 struct lpuart_port *sport = container_of(port, 575 struct lpuart_port, port); 576 struct circ_buf *xmit = &sport->port.state->xmit; 577 unsigned char temp; 578 579 temp = readb(port->membase + UARTCR2); 580 writeb(temp | UARTCR2_TIE, port->membase + UARTCR2); 581 582 if (sport->lpuart_dma_tx_use) { 583 if (!uart_circ_empty(xmit) && !sport->dma_tx_in_progress) 584 lpuart_prepare_tx(sport); 585 } else { 586 if (readb(port->membase + UARTSR1) & UARTSR1_TDRE) 587 lpuart_transmit_buffer(sport); 588 } 589 } 590 591 static void lpuart32_start_tx(struct uart_port *port) 592 { 593 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 594 unsigned long temp; 595 596 temp = lpuart32_read(port->membase + UARTCTRL); 597 lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL); 598 599 if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE) 600 lpuart32_transmit_buffer(sport); 601 } 602 603 static irqreturn_t lpuart_txint(int irq, void *dev_id) 604 { 605 struct lpuart_port *sport = dev_id; 606 struct circ_buf *xmit = &sport->port.state->xmit; 607 unsigned long flags; 608 609 spin_lock_irqsave(&sport->port.lock, flags); 610 if (sport->port.x_char) { 611 if (sport->lpuart32) 612 lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); 613 else 614 writeb(sport->port.x_char, sport->port.membase + UARTDR); 615 goto out; 616 } 617 618 if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { 619 if (sport->lpuart32) 620 lpuart32_stop_tx(&sport->port); 621 else 622 lpuart_stop_tx(&sport->port); 623 goto out; 624 } 625 626 if (sport->lpuart32) 627 lpuart32_transmit_buffer(sport); 628 else 629 lpuart_transmit_buffer(sport); 630 631 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 632 uart_write_wakeup(&sport->port); 633 634 out: 635 spin_unlock_irqrestore(&sport->port.lock, flags); 636 return IRQ_HANDLED; 637 } 638 639 static irqreturn_t lpuart_rxint(int irq, void *dev_id) 640 { 641 struct lpuart_port *sport = dev_id; 642 unsigned int flg, ignored = 0; 643 struct tty_port *port = &sport->port.state->port; 644 unsigned long flags; 645 unsigned char rx, sr; 646 647 spin_lock_irqsave(&sport->port.lock, flags); 648 649 while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { 650 flg = TTY_NORMAL; 651 sport->port.icount.rx++; 652 /* 653 * to clear the FE, OR, NF, FE, PE flags, 654 * read SR1 then read DR 655 */ 656 sr = readb(sport->port.membase + UARTSR1); 657 rx = readb(sport->port.membase + UARTDR); 658 659 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) 660 continue; 661 662 if (sr & (UARTSR1_PE | UARTSR1_OR | UARTSR1_FE)) { 663 if (sr & UARTSR1_PE) 664 sport->port.icount.parity++; 665 else if (sr & UARTSR1_FE) 666 sport->port.icount.frame++; 667 668 if (sr & UARTSR1_OR) 669 sport->port.icount.overrun++; 670 671 if (sr & sport->port.ignore_status_mask) { 672 if (++ignored > 100) 673 goto out; 674 continue; 675 } 676 677 sr &= sport->port.read_status_mask; 678 679 if (sr & UARTSR1_PE) 680 flg = TTY_PARITY; 681 else if (sr & UARTSR1_FE) 682 flg = TTY_FRAME; 683 684 if (sr & UARTSR1_OR) 685 flg = TTY_OVERRUN; 686 687 #ifdef SUPPORT_SYSRQ 688 sport->port.sysrq = 0; 689 #endif 690 } 691 692 tty_insert_flip_char(port, rx, flg); 693 } 694 695 out: 696 spin_unlock_irqrestore(&sport->port.lock, flags); 697 698 tty_flip_buffer_push(port); 699 return IRQ_HANDLED; 700 } 701 702 static irqreturn_t lpuart32_rxint(int irq, void *dev_id) 703 { 704 struct lpuart_port *sport = dev_id; 705 unsigned int flg, ignored = 0; 706 struct tty_port *port = &sport->port.state->port; 707 unsigned long flags; 708 unsigned long rx, sr; 709 710 spin_lock_irqsave(&sport->port.lock, flags); 711 712 while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) { 713 flg = TTY_NORMAL; 714 sport->port.icount.rx++; 715 /* 716 * to clear the FE, OR, NF, FE, PE flags, 717 * read STAT then read DATA reg 718 */ 719 sr = lpuart32_read(sport->port.membase + UARTSTAT); 720 rx = lpuart32_read(sport->port.membase + UARTDATA); 721 rx &= 0x3ff; 722 723 if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) 724 continue; 725 726 if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) { 727 if (sr & UARTSTAT_PE) 728 sport->port.icount.parity++; 729 else if (sr & UARTSTAT_FE) 730 sport->port.icount.frame++; 731 732 if (sr & UARTSTAT_OR) 733 sport->port.icount.overrun++; 734 735 if (sr & sport->port.ignore_status_mask) { 736 if (++ignored > 100) 737 goto out; 738 continue; 739 } 740 741 sr &= sport->port.read_status_mask; 742 743 if (sr & UARTSTAT_PE) 744 flg = TTY_PARITY; 745 else if (sr & UARTSTAT_FE) 746 flg = TTY_FRAME; 747 748 if (sr & UARTSTAT_OR) 749 flg = TTY_OVERRUN; 750 751 #ifdef SUPPORT_SYSRQ 752 sport->port.sysrq = 0; 753 #endif 754 } 755 756 tty_insert_flip_char(port, rx, flg); 757 } 758 759 out: 760 spin_unlock_irqrestore(&sport->port.lock, flags); 761 762 tty_flip_buffer_push(port); 763 return IRQ_HANDLED; 764 } 765 766 static irqreturn_t lpuart_int(int irq, void *dev_id) 767 { 768 struct lpuart_port *sport = dev_id; 769 unsigned char sts, crdma; 770 771 sts = readb(sport->port.membase + UARTSR1); 772 crdma = readb(sport->port.membase + UARTCR5); 773 774 if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) { 775 if (sport->lpuart_dma_rx_use) 776 lpuart_prepare_rx(sport); 777 else 778 lpuart_rxint(irq, dev_id); 779 } 780 if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) { 781 if (sport->lpuart_dma_tx_use) 782 lpuart_pio_tx(sport); 783 else 784 lpuart_txint(irq, dev_id); 785 } 786 787 return IRQ_HANDLED; 788 } 789 790 static irqreturn_t lpuart32_int(int irq, void *dev_id) 791 { 792 struct lpuart_port *sport = dev_id; 793 unsigned long sts, rxcount; 794 795 sts = lpuart32_read(sport->port.membase + UARTSTAT); 796 rxcount = lpuart32_read(sport->port.membase + UARTWATER); 797 rxcount = rxcount >> UARTWATER_RXCNT_OFF; 798 799 if (sts & UARTSTAT_RDRF || rxcount > 0) 800 lpuart32_rxint(irq, dev_id); 801 802 if ((sts & UARTSTAT_TDRE) && 803 !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE)) 804 lpuart_txint(irq, dev_id); 805 806 lpuart32_write(sts, sport->port.membase + UARTSTAT); 807 return IRQ_HANDLED; 808 } 809 810 /* return TIOCSER_TEMT when transmitter is not busy */ 811 static unsigned int lpuart_tx_empty(struct uart_port *port) 812 { 813 return (readb(port->membase + UARTSR1) & UARTSR1_TC) ? 814 TIOCSER_TEMT : 0; 815 } 816 817 static unsigned int lpuart32_tx_empty(struct uart_port *port) 818 { 819 return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ? 820 TIOCSER_TEMT : 0; 821 } 822 823 static unsigned int lpuart_get_mctrl(struct uart_port *port) 824 { 825 unsigned int temp = 0; 826 unsigned char reg; 827 828 reg = readb(port->membase + UARTMODEM); 829 if (reg & UARTMODEM_TXCTSE) 830 temp |= TIOCM_CTS; 831 832 if (reg & UARTMODEM_RXRTSE) 833 temp |= TIOCM_RTS; 834 835 return temp; 836 } 837 838 static unsigned int lpuart32_get_mctrl(struct uart_port *port) 839 { 840 unsigned int temp = 0; 841 unsigned long reg; 842 843 reg = lpuart32_read(port->membase + UARTMODIR); 844 if (reg & UARTMODIR_TXCTSE) 845 temp |= TIOCM_CTS; 846 847 if (reg & UARTMODIR_RXRTSE) 848 temp |= TIOCM_RTS; 849 850 return temp; 851 } 852 853 static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) 854 { 855 unsigned char temp; 856 857 temp = readb(port->membase + UARTMODEM) & 858 ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); 859 860 if (mctrl & TIOCM_RTS) 861 temp |= UARTMODEM_RXRTSE; 862 863 if (mctrl & TIOCM_CTS) 864 temp |= UARTMODEM_TXCTSE; 865 866 writeb(temp, port->membase + UARTMODEM); 867 } 868 869 static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) 870 { 871 unsigned long temp; 872 873 temp = lpuart32_read(port->membase + UARTMODIR) & 874 ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); 875 876 if (mctrl & TIOCM_RTS) 877 temp |= UARTMODIR_RXRTSE; 878 879 if (mctrl & TIOCM_CTS) 880 temp |= UARTMODIR_TXCTSE; 881 882 lpuart32_write(temp, port->membase + UARTMODIR); 883 } 884 885 static void lpuart_break_ctl(struct uart_port *port, int break_state) 886 { 887 unsigned char temp; 888 889 temp = readb(port->membase + UARTCR2) & ~UARTCR2_SBK; 890 891 if (break_state != 0) 892 temp |= UARTCR2_SBK; 893 894 writeb(temp, port->membase + UARTCR2); 895 } 896 897 static void lpuart32_break_ctl(struct uart_port *port, int break_state) 898 { 899 unsigned long temp; 900 901 temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK; 902 903 if (break_state != 0) 904 temp |= UARTCTRL_SBK; 905 906 lpuart32_write(temp, port->membase + UARTCTRL); 907 } 908 909 static void lpuart_setup_watermark(struct lpuart_port *sport) 910 { 911 unsigned char val, cr2; 912 unsigned char cr2_saved; 913 914 cr2 = readb(sport->port.membase + UARTCR2); 915 cr2_saved = cr2; 916 cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_TE | 917 UARTCR2_RIE | UARTCR2_RE); 918 writeb(cr2, sport->port.membase + UARTCR2); 919 920 val = readb(sport->port.membase + UARTPFIFO); 921 writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, 922 sport->port.membase + UARTPFIFO); 923 924 /* explicitly clear RDRF */ 925 readb(sport->port.membase + UARTSR1); 926 927 /* flush Tx and Rx FIFO */ 928 writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, 929 sport->port.membase + UARTCFIFO); 930 931 writeb(0, sport->port.membase + UARTTWFIFO); 932 writeb(1, sport->port.membase + UARTRWFIFO); 933 934 /* Restore cr2 */ 935 writeb(cr2_saved, sport->port.membase + UARTCR2); 936 } 937 938 static void lpuart32_setup_watermark(struct lpuart_port *sport) 939 { 940 unsigned long val, ctrl; 941 unsigned long ctrl_saved; 942 943 ctrl = lpuart32_read(sport->port.membase + UARTCTRL); 944 ctrl_saved = ctrl; 945 ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | 946 UARTCTRL_RIE | UARTCTRL_RE); 947 lpuart32_write(ctrl, sport->port.membase + UARTCTRL); 948 949 /* enable FIFO mode */ 950 val = lpuart32_read(sport->port.membase + UARTFIFO); 951 val |= UARTFIFO_TXFE | UARTFIFO_RXFE; 952 val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; 953 lpuart32_write(val, sport->port.membase + UARTFIFO); 954 955 /* set the watermark */ 956 val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); 957 lpuart32_write(val, sport->port.membase + UARTWATER); 958 959 /* Restore cr2 */ 960 lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL); 961 } 962 963 static int lpuart_dma_tx_request(struct uart_port *port) 964 { 965 struct lpuart_port *sport = container_of(port, 966 struct lpuart_port, port); 967 struct dma_slave_config dma_tx_sconfig; 968 dma_addr_t dma_bus; 969 unsigned char *dma_buf; 970 int ret; 971 972 dma_bus = dma_map_single(sport->dma_tx_chan->device->dev, 973 sport->port.state->xmit.buf, 974 UART_XMIT_SIZE, DMA_TO_DEVICE); 975 976 if (dma_mapping_error(sport->dma_tx_chan->device->dev, dma_bus)) { 977 dev_err(sport->port.dev, "dma_map_single tx failed\n"); 978 return -ENOMEM; 979 } 980 981 dma_buf = sport->port.state->xmit.buf; 982 dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR; 983 dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 984 dma_tx_sconfig.dst_maxburst = sport->txfifo_size; 985 dma_tx_sconfig.direction = DMA_MEM_TO_DEV; 986 ret = dmaengine_slave_config(sport->dma_tx_chan, &dma_tx_sconfig); 987 988 if (ret < 0) { 989 dev_err(sport->port.dev, 990 "Dma slave config failed, err = %d\n", ret); 991 return ret; 992 } 993 994 sport->dma_tx_buf_virt = dma_buf; 995 sport->dma_tx_buf_bus = dma_bus; 996 sport->dma_tx_in_progress = 0; 997 998 return 0; 999 } 1000 1001 static int lpuart_dma_rx_request(struct uart_port *port) 1002 { 1003 struct lpuart_port *sport = container_of(port, 1004 struct lpuart_port, port); 1005 struct dma_slave_config dma_rx_sconfig; 1006 dma_addr_t dma_bus; 1007 unsigned char *dma_buf; 1008 int ret; 1009 1010 dma_buf = devm_kzalloc(sport->port.dev, 1011 FSL_UART_RX_DMA_BUFFER_SIZE, GFP_KERNEL); 1012 1013 if (!dma_buf) { 1014 dev_err(sport->port.dev, "Dma rx alloc failed\n"); 1015 return -ENOMEM; 1016 } 1017 1018 dma_bus = dma_map_single(sport->dma_rx_chan->device->dev, dma_buf, 1019 FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); 1020 1021 if (dma_mapping_error(sport->dma_rx_chan->device->dev, dma_bus)) { 1022 dev_err(sport->port.dev, "dma_map_single rx failed\n"); 1023 return -ENOMEM; 1024 } 1025 1026 dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR; 1027 dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; 1028 dma_rx_sconfig.src_maxburst = 1; 1029 dma_rx_sconfig.direction = DMA_DEV_TO_MEM; 1030 ret = dmaengine_slave_config(sport->dma_rx_chan, &dma_rx_sconfig); 1031 1032 if (ret < 0) { 1033 dev_err(sport->port.dev, 1034 "Dma slave config failed, err = %d\n", ret); 1035 return ret; 1036 } 1037 1038 sport->dma_rx_buf_virt = dma_buf; 1039 sport->dma_rx_buf_bus = dma_bus; 1040 sport->dma_rx_in_progress = 0; 1041 1042 return 0; 1043 } 1044 1045 static void lpuart_dma_tx_free(struct uart_port *port) 1046 { 1047 struct lpuart_port *sport = container_of(port, 1048 struct lpuart_port, port); 1049 1050 dma_unmap_single(sport->port.dev, sport->dma_tx_buf_bus, 1051 UART_XMIT_SIZE, DMA_TO_DEVICE); 1052 1053 sport->dma_tx_buf_bus = 0; 1054 sport->dma_tx_buf_virt = NULL; 1055 } 1056 1057 static void lpuart_dma_rx_free(struct uart_port *port) 1058 { 1059 struct lpuart_port *sport = container_of(port, 1060 struct lpuart_port, port); 1061 1062 dma_unmap_single(sport->port.dev, sport->dma_rx_buf_bus, 1063 FSL_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE); 1064 1065 sport->dma_rx_buf_bus = 0; 1066 sport->dma_rx_buf_virt = NULL; 1067 } 1068 1069 static int lpuart_startup(struct uart_port *port) 1070 { 1071 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1072 int ret; 1073 unsigned long flags; 1074 unsigned char temp; 1075 1076 /* determine FIFO size and enable FIFO mode */ 1077 temp = readb(sport->port.membase + UARTPFIFO); 1078 1079 sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) & 1080 UARTPFIFO_FIFOSIZE_MASK) + 1); 1081 1082 sport->port.fifosize = sport->txfifo_size; 1083 1084 sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & 1085 UARTPFIFO_FIFOSIZE_MASK) + 1); 1086 1087 if (sport->dma_rx_chan && !lpuart_dma_rx_request(port)) { 1088 sport->lpuart_dma_rx_use = true; 1089 setup_timer(&sport->lpuart_timer, lpuart_timer_func, 1090 (unsigned long)sport); 1091 } else 1092 sport->lpuart_dma_rx_use = false; 1093 1094 1095 if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) { 1096 sport->lpuart_dma_tx_use = true; 1097 temp = readb(port->membase + UARTCR5); 1098 temp &= ~UARTCR5_RDMAS; 1099 writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); 1100 } else 1101 sport->lpuart_dma_tx_use = false; 1102 1103 ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0, 1104 DRIVER_NAME, sport); 1105 if (ret) 1106 return ret; 1107 1108 spin_lock_irqsave(&sport->port.lock, flags); 1109 1110 lpuart_setup_watermark(sport); 1111 1112 temp = readb(sport->port.membase + UARTCR2); 1113 temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE); 1114 writeb(temp, sport->port.membase + UARTCR2); 1115 1116 spin_unlock_irqrestore(&sport->port.lock, flags); 1117 return 0; 1118 } 1119 1120 static int lpuart32_startup(struct uart_port *port) 1121 { 1122 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1123 int ret; 1124 unsigned long flags; 1125 unsigned long temp; 1126 1127 /* determine FIFO size */ 1128 temp = lpuart32_read(sport->port.membase + UARTFIFO); 1129 1130 sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) & 1131 UARTFIFO_FIFOSIZE_MASK) - 1); 1132 1133 sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) & 1134 UARTFIFO_FIFOSIZE_MASK) - 1); 1135 1136 ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0, 1137 DRIVER_NAME, sport); 1138 if (ret) 1139 return ret; 1140 1141 spin_lock_irqsave(&sport->port.lock, flags); 1142 1143 lpuart32_setup_watermark(sport); 1144 1145 temp = lpuart32_read(sport->port.membase + UARTCTRL); 1146 temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE); 1147 temp |= UARTCTRL_ILIE; 1148 lpuart32_write(temp, sport->port.membase + UARTCTRL); 1149 1150 spin_unlock_irqrestore(&sport->port.lock, flags); 1151 return 0; 1152 } 1153 1154 static void lpuart_shutdown(struct uart_port *port) 1155 { 1156 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1157 unsigned char temp; 1158 unsigned long flags; 1159 1160 spin_lock_irqsave(&port->lock, flags); 1161 1162 /* disable Rx/Tx and interrupts */ 1163 temp = readb(port->membase + UARTCR2); 1164 temp &= ~(UARTCR2_TE | UARTCR2_RE | 1165 UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); 1166 writeb(temp, port->membase + UARTCR2); 1167 1168 spin_unlock_irqrestore(&port->lock, flags); 1169 1170 devm_free_irq(port->dev, port->irq, sport); 1171 1172 if (sport->lpuart_dma_rx_use) { 1173 lpuart_dma_rx_free(&sport->port); 1174 del_timer_sync(&sport->lpuart_timer); 1175 } 1176 1177 if (sport->lpuart_dma_tx_use) 1178 lpuart_dma_tx_free(&sport->port); 1179 } 1180 1181 static void lpuart32_shutdown(struct uart_port *port) 1182 { 1183 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1184 unsigned long temp; 1185 unsigned long flags; 1186 1187 spin_lock_irqsave(&port->lock, flags); 1188 1189 /* disable Rx/Tx and interrupts */ 1190 temp = lpuart32_read(port->membase + UARTCTRL); 1191 temp &= ~(UARTCTRL_TE | UARTCTRL_RE | 1192 UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); 1193 lpuart32_write(temp, port->membase + UARTCTRL); 1194 1195 spin_unlock_irqrestore(&port->lock, flags); 1196 1197 devm_free_irq(port->dev, port->irq, sport); 1198 } 1199 1200 static void 1201 lpuart_set_termios(struct uart_port *port, struct ktermios *termios, 1202 struct ktermios *old) 1203 { 1204 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1205 unsigned long flags; 1206 unsigned char cr1, old_cr1, old_cr2, cr4, bdh, modem; 1207 unsigned int baud; 1208 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; 1209 unsigned int sbr, brfa; 1210 1211 cr1 = old_cr1 = readb(sport->port.membase + UARTCR1); 1212 old_cr2 = readb(sport->port.membase + UARTCR2); 1213 cr4 = readb(sport->port.membase + UARTCR4); 1214 bdh = readb(sport->port.membase + UARTBDH); 1215 modem = readb(sport->port.membase + UARTMODEM); 1216 /* 1217 * only support CS8 and CS7, and for CS7 must enable PE. 1218 * supported mode: 1219 * - (7,e/o,1) 1220 * - (8,n,1) 1221 * - (8,m/s,1) 1222 * - (8,e/o,1) 1223 */ 1224 while ((termios->c_cflag & CSIZE) != CS8 && 1225 (termios->c_cflag & CSIZE) != CS7) { 1226 termios->c_cflag &= ~CSIZE; 1227 termios->c_cflag |= old_csize; 1228 old_csize = CS8; 1229 } 1230 1231 if ((termios->c_cflag & CSIZE) == CS8 || 1232 (termios->c_cflag & CSIZE) == CS7) 1233 cr1 = old_cr1 & ~UARTCR1_M; 1234 1235 if (termios->c_cflag & CMSPAR) { 1236 if ((termios->c_cflag & CSIZE) != CS8) { 1237 termios->c_cflag &= ~CSIZE; 1238 termios->c_cflag |= CS8; 1239 } 1240 cr1 |= UARTCR1_M; 1241 } 1242 1243 if (termios->c_cflag & CRTSCTS) { 1244 modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); 1245 } else { 1246 termios->c_cflag &= ~CRTSCTS; 1247 modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); 1248 } 1249 1250 if (termios->c_cflag & CSTOPB) 1251 termios->c_cflag &= ~CSTOPB; 1252 1253 /* parity must be enabled when CS7 to match 8-bits format */ 1254 if ((termios->c_cflag & CSIZE) == CS7) 1255 termios->c_cflag |= PARENB; 1256 1257 if ((termios->c_cflag & PARENB)) { 1258 if (termios->c_cflag & CMSPAR) { 1259 cr1 &= ~UARTCR1_PE; 1260 cr1 |= UARTCR1_M; 1261 } else { 1262 cr1 |= UARTCR1_PE; 1263 if ((termios->c_cflag & CSIZE) == CS8) 1264 cr1 |= UARTCR1_M; 1265 if (termios->c_cflag & PARODD) 1266 cr1 |= UARTCR1_PT; 1267 else 1268 cr1 &= ~UARTCR1_PT; 1269 } 1270 } 1271 1272 /* ask the core to calculate the divisor */ 1273 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); 1274 1275 spin_lock_irqsave(&sport->port.lock, flags); 1276 1277 sport->port.read_status_mask = 0; 1278 if (termios->c_iflag & INPCK) 1279 sport->port.read_status_mask |= (UARTSR1_FE | UARTSR1_PE); 1280 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 1281 sport->port.read_status_mask |= UARTSR1_FE; 1282 1283 /* characters to ignore */ 1284 sport->port.ignore_status_mask = 0; 1285 if (termios->c_iflag & IGNPAR) 1286 sport->port.ignore_status_mask |= UARTSR1_PE; 1287 if (termios->c_iflag & IGNBRK) { 1288 sport->port.ignore_status_mask |= UARTSR1_FE; 1289 /* 1290 * if we're ignoring parity and break indicators, 1291 * ignore overruns too (for real raw support). 1292 */ 1293 if (termios->c_iflag & IGNPAR) 1294 sport->port.ignore_status_mask |= UARTSR1_OR; 1295 } 1296 1297 /* update the per-port timeout */ 1298 uart_update_timeout(port, termios->c_cflag, baud); 1299 1300 if (sport->lpuart_dma_rx_use) { 1301 /* Calculate delay for 1.5 DMA buffers */ 1302 sport->dma_rx_timeout = (sport->port.timeout - HZ / 50) * 1303 FSL_UART_RX_DMA_BUFFER_SIZE * 3 / 1304 sport->rxfifo_size / 2; 1305 dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n", 1306 sport->dma_rx_timeout * 1000 / HZ, sport->port.timeout); 1307 if (sport->dma_rx_timeout < msecs_to_jiffies(20)) 1308 sport->dma_rx_timeout = msecs_to_jiffies(20); 1309 } 1310 1311 /* wait transmit engin complete */ 1312 while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) 1313 barrier(); 1314 1315 /* disable transmit and receive */ 1316 writeb(old_cr2 & ~(UARTCR2_TE | UARTCR2_RE), 1317 sport->port.membase + UARTCR2); 1318 1319 sbr = sport->port.uartclk / (16 * baud); 1320 brfa = ((sport->port.uartclk - (16 * sbr * baud)) * 2) / baud; 1321 bdh &= ~UARTBDH_SBR_MASK; 1322 bdh |= (sbr >> 8) & 0x1F; 1323 cr4 &= ~UARTCR4_BRFA_MASK; 1324 brfa &= UARTCR4_BRFA_MASK; 1325 writeb(cr4 | brfa, sport->port.membase + UARTCR4); 1326 writeb(bdh, sport->port.membase + UARTBDH); 1327 writeb(sbr & 0xFF, sport->port.membase + UARTBDL); 1328 writeb(cr1, sport->port.membase + UARTCR1); 1329 writeb(modem, sport->port.membase + UARTMODEM); 1330 1331 /* restore control register */ 1332 writeb(old_cr2, sport->port.membase + UARTCR2); 1333 1334 spin_unlock_irqrestore(&sport->port.lock, flags); 1335 } 1336 1337 static void 1338 lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, 1339 struct ktermios *old) 1340 { 1341 struct lpuart_port *sport = container_of(port, struct lpuart_port, port); 1342 unsigned long flags; 1343 unsigned long ctrl, old_ctrl, bd, modem; 1344 unsigned int baud; 1345 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; 1346 unsigned int sbr; 1347 1348 ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL); 1349 bd = lpuart32_read(sport->port.membase + UARTBAUD); 1350 modem = lpuart32_read(sport->port.membase + UARTMODIR); 1351 /* 1352 * only support CS8 and CS7, and for CS7 must enable PE. 1353 * supported mode: 1354 * - (7,e/o,1) 1355 * - (8,n,1) 1356 * - (8,m/s,1) 1357 * - (8,e/o,1) 1358 */ 1359 while ((termios->c_cflag & CSIZE) != CS8 && 1360 (termios->c_cflag & CSIZE) != CS7) { 1361 termios->c_cflag &= ~CSIZE; 1362 termios->c_cflag |= old_csize; 1363 old_csize = CS8; 1364 } 1365 1366 if ((termios->c_cflag & CSIZE) == CS8 || 1367 (termios->c_cflag & CSIZE) == CS7) 1368 ctrl = old_ctrl & ~UARTCTRL_M; 1369 1370 if (termios->c_cflag & CMSPAR) { 1371 if ((termios->c_cflag & CSIZE) != CS8) { 1372 termios->c_cflag &= ~CSIZE; 1373 termios->c_cflag |= CS8; 1374 } 1375 ctrl |= UARTCTRL_M; 1376 } 1377 1378 if (termios->c_cflag & CRTSCTS) { 1379 modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); 1380 } else { 1381 termios->c_cflag &= ~CRTSCTS; 1382 modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); 1383 } 1384 1385 if (termios->c_cflag & CSTOPB) 1386 termios->c_cflag &= ~CSTOPB; 1387 1388 /* parity must be enabled when CS7 to match 8-bits format */ 1389 if ((termios->c_cflag & CSIZE) == CS7) 1390 termios->c_cflag |= PARENB; 1391 1392 if ((termios->c_cflag & PARENB)) { 1393 if (termios->c_cflag & CMSPAR) { 1394 ctrl &= ~UARTCTRL_PE; 1395 ctrl |= UARTCTRL_M; 1396 } else { 1397 ctrl |= UARTCR1_PE; 1398 if ((termios->c_cflag & CSIZE) == CS8) 1399 ctrl |= UARTCTRL_M; 1400 if (termios->c_cflag & PARODD) 1401 ctrl |= UARTCTRL_PT; 1402 else 1403 ctrl &= ~UARTCTRL_PT; 1404 } 1405 } 1406 1407 /* ask the core to calculate the divisor */ 1408 baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); 1409 1410 spin_lock_irqsave(&sport->port.lock, flags); 1411 1412 sport->port.read_status_mask = 0; 1413 if (termios->c_iflag & INPCK) 1414 sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE); 1415 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) 1416 sport->port.read_status_mask |= UARTSTAT_FE; 1417 1418 /* characters to ignore */ 1419 sport->port.ignore_status_mask = 0; 1420 if (termios->c_iflag & IGNPAR) 1421 sport->port.ignore_status_mask |= UARTSTAT_PE; 1422 if (termios->c_iflag & IGNBRK) { 1423 sport->port.ignore_status_mask |= UARTSTAT_FE; 1424 /* 1425 * if we're ignoring parity and break indicators, 1426 * ignore overruns too (for real raw support). 1427 */ 1428 if (termios->c_iflag & IGNPAR) 1429 sport->port.ignore_status_mask |= UARTSTAT_OR; 1430 } 1431 1432 /* update the per-port timeout */ 1433 uart_update_timeout(port, termios->c_cflag, baud); 1434 1435 /* wait transmit engin complete */ 1436 while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) 1437 barrier(); 1438 1439 /* disable transmit and receive */ 1440 lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), 1441 sport->port.membase + UARTCTRL); 1442 1443 sbr = sport->port.uartclk / (16 * baud); 1444 bd &= ~UARTBAUD_SBR_MASK; 1445 bd |= sbr & UARTBAUD_SBR_MASK; 1446 bd |= UARTBAUD_BOTHEDGE; 1447 bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); 1448 lpuart32_write(bd, sport->port.membase + UARTBAUD); 1449 lpuart32_write(modem, sport->port.membase + UARTMODIR); 1450 lpuart32_write(ctrl, sport->port.membase + UARTCTRL); 1451 /* restore control register */ 1452 1453 spin_unlock_irqrestore(&sport->port.lock, flags); 1454 } 1455 1456 static const char *lpuart_type(struct uart_port *port) 1457 { 1458 return "FSL_LPUART"; 1459 } 1460 1461 static void lpuart_release_port(struct uart_port *port) 1462 { 1463 /* nothing to do */ 1464 } 1465 1466 static int lpuart_request_port(struct uart_port *port) 1467 { 1468 return 0; 1469 } 1470 1471 /* configure/autoconfigure the port */ 1472 static void lpuart_config_port(struct uart_port *port, int flags) 1473 { 1474 if (flags & UART_CONFIG_TYPE) 1475 port->type = PORT_LPUART; 1476 } 1477 1478 static int lpuart_verify_port(struct uart_port *port, struct serial_struct *ser) 1479 { 1480 int ret = 0; 1481 1482 if (ser->type != PORT_UNKNOWN && ser->type != PORT_LPUART) 1483 ret = -EINVAL; 1484 if (port->irq != ser->irq) 1485 ret = -EINVAL; 1486 if (ser->io_type != UPIO_MEM) 1487 ret = -EINVAL; 1488 if (port->uartclk / 16 != ser->baud_base) 1489 ret = -EINVAL; 1490 if (port->iobase != ser->port) 1491 ret = -EINVAL; 1492 if (ser->hub6 != 0) 1493 ret = -EINVAL; 1494 return ret; 1495 } 1496 1497 static struct uart_ops lpuart_pops = { 1498 .tx_empty = lpuart_tx_empty, 1499 .set_mctrl = lpuart_set_mctrl, 1500 .get_mctrl = lpuart_get_mctrl, 1501 .stop_tx = lpuart_stop_tx, 1502 .start_tx = lpuart_start_tx, 1503 .stop_rx = lpuart_stop_rx, 1504 .break_ctl = lpuart_break_ctl, 1505 .startup = lpuart_startup, 1506 .shutdown = lpuart_shutdown, 1507 .set_termios = lpuart_set_termios, 1508 .type = lpuart_type, 1509 .request_port = lpuart_request_port, 1510 .release_port = lpuart_release_port, 1511 .config_port = lpuart_config_port, 1512 .verify_port = lpuart_verify_port, 1513 .flush_buffer = lpuart_flush_buffer, 1514 }; 1515 1516 static struct uart_ops lpuart32_pops = { 1517 .tx_empty = lpuart32_tx_empty, 1518 .set_mctrl = lpuart32_set_mctrl, 1519 .get_mctrl = lpuart32_get_mctrl, 1520 .stop_tx = lpuart32_stop_tx, 1521 .start_tx = lpuart32_start_tx, 1522 .stop_rx = lpuart32_stop_rx, 1523 .break_ctl = lpuart32_break_ctl, 1524 .startup = lpuart32_startup, 1525 .shutdown = lpuart32_shutdown, 1526 .set_termios = lpuart32_set_termios, 1527 .type = lpuart_type, 1528 .request_port = lpuart_request_port, 1529 .release_port = lpuart_release_port, 1530 .config_port = lpuart_config_port, 1531 .verify_port = lpuart_verify_port, 1532 .flush_buffer = lpuart_flush_buffer, 1533 }; 1534 1535 static struct lpuart_port *lpuart_ports[UART_NR]; 1536 1537 #ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE 1538 static void lpuart_console_putchar(struct uart_port *port, int ch) 1539 { 1540 while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE)) 1541 barrier(); 1542 1543 writeb(ch, port->membase + UARTDR); 1544 } 1545 1546 static void lpuart32_console_putchar(struct uart_port *port, int ch) 1547 { 1548 while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)) 1549 barrier(); 1550 1551 lpuart32_write(ch, port->membase + UARTDATA); 1552 } 1553 1554 static void 1555 lpuart_console_write(struct console *co, const char *s, unsigned int count) 1556 { 1557 struct lpuart_port *sport = lpuart_ports[co->index]; 1558 unsigned char old_cr2, cr2; 1559 1560 /* first save CR2 and then disable interrupts */ 1561 cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); 1562 cr2 |= (UARTCR2_TE | UARTCR2_RE); 1563 cr2 &= ~(UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); 1564 writeb(cr2, sport->port.membase + UARTCR2); 1565 1566 uart_console_write(&sport->port, s, count, lpuart_console_putchar); 1567 1568 /* wait for transmitter finish complete and restore CR2 */ 1569 while (!(readb(sport->port.membase + UARTSR1) & UARTSR1_TC)) 1570 barrier(); 1571 1572 writeb(old_cr2, sport->port.membase + UARTCR2); 1573 } 1574 1575 static void 1576 lpuart32_console_write(struct console *co, const char *s, unsigned int count) 1577 { 1578 struct lpuart_port *sport = lpuart_ports[co->index]; 1579 unsigned long old_cr, cr; 1580 1581 /* first save CR2 and then disable interrupts */ 1582 cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); 1583 cr |= (UARTCTRL_TE | UARTCTRL_RE); 1584 cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); 1585 lpuart32_write(cr, sport->port.membase + UARTCTRL); 1586 1587 uart_console_write(&sport->port, s, count, lpuart32_console_putchar); 1588 1589 /* wait for transmitter finish complete and restore CR2 */ 1590 while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) 1591 barrier(); 1592 1593 lpuart32_write(old_cr, sport->port.membase + UARTCTRL); 1594 } 1595 1596 /* 1597 * if the port was already initialised (eg, by a boot loader), 1598 * try to determine the current setup. 1599 */ 1600 static void __init 1601 lpuart_console_get_options(struct lpuart_port *sport, int *baud, 1602 int *parity, int *bits) 1603 { 1604 unsigned char cr, bdh, bdl, brfa; 1605 unsigned int sbr, uartclk, baud_raw; 1606 1607 cr = readb(sport->port.membase + UARTCR2); 1608 cr &= UARTCR2_TE | UARTCR2_RE; 1609 if (!cr) 1610 return; 1611 1612 /* ok, the port was enabled */ 1613 1614 cr = readb(sport->port.membase + UARTCR1); 1615 1616 *parity = 'n'; 1617 if (cr & UARTCR1_PE) { 1618 if (cr & UARTCR1_PT) 1619 *parity = 'o'; 1620 else 1621 *parity = 'e'; 1622 } 1623 1624 if (cr & UARTCR1_M) 1625 *bits = 9; 1626 else 1627 *bits = 8; 1628 1629 bdh = readb(sport->port.membase + UARTBDH); 1630 bdh &= UARTBDH_SBR_MASK; 1631 bdl = readb(sport->port.membase + UARTBDL); 1632 sbr = bdh; 1633 sbr <<= 8; 1634 sbr |= bdl; 1635 brfa = readb(sport->port.membase + UARTCR4); 1636 brfa &= UARTCR4_BRFA_MASK; 1637 1638 uartclk = clk_get_rate(sport->clk); 1639 /* 1640 * baud = mod_clk/(16*(sbr[13]+(brfa)/32) 1641 */ 1642 baud_raw = uartclk / (16 * (sbr + brfa / 32)); 1643 1644 if (*baud != baud_raw) 1645 printk(KERN_INFO "Serial: Console lpuart rounded baud rate" 1646 "from %d to %d\n", baud_raw, *baud); 1647 } 1648 1649 static void __init 1650 lpuart32_console_get_options(struct lpuart_port *sport, int *baud, 1651 int *parity, int *bits) 1652 { 1653 unsigned long cr, bd; 1654 unsigned int sbr, uartclk, baud_raw; 1655 1656 cr = lpuart32_read(sport->port.membase + UARTCTRL); 1657 cr &= UARTCTRL_TE | UARTCTRL_RE; 1658 if (!cr) 1659 return; 1660 1661 /* ok, the port was enabled */ 1662 1663 cr = lpuart32_read(sport->port.membase + UARTCTRL); 1664 1665 *parity = 'n'; 1666 if (cr & UARTCTRL_PE) { 1667 if (cr & UARTCTRL_PT) 1668 *parity = 'o'; 1669 else 1670 *parity = 'e'; 1671 } 1672 1673 if (cr & UARTCTRL_M) 1674 *bits = 9; 1675 else 1676 *bits = 8; 1677 1678 bd = lpuart32_read(sport->port.membase + UARTBAUD); 1679 bd &= UARTBAUD_SBR_MASK; 1680 sbr = bd; 1681 uartclk = clk_get_rate(sport->clk); 1682 /* 1683 * baud = mod_clk/(16*(sbr[13]+(brfa)/32) 1684 */ 1685 baud_raw = uartclk / (16 * sbr); 1686 1687 if (*baud != baud_raw) 1688 printk(KERN_INFO "Serial: Console lpuart rounded baud rate" 1689 "from %d to %d\n", baud_raw, *baud); 1690 } 1691 1692 static int __init lpuart_console_setup(struct console *co, char *options) 1693 { 1694 struct lpuart_port *sport; 1695 int baud = 115200; 1696 int bits = 8; 1697 int parity = 'n'; 1698 int flow = 'n'; 1699 1700 /* 1701 * check whether an invalid uart number has been specified, and 1702 * if so, search for the first available port that does have 1703 * console support. 1704 */ 1705 if (co->index == -1 || co->index >= ARRAY_SIZE(lpuart_ports)) 1706 co->index = 0; 1707 1708 sport = lpuart_ports[co->index]; 1709 if (sport == NULL) 1710 return -ENODEV; 1711 1712 if (options) 1713 uart_parse_options(options, &baud, &parity, &bits, &flow); 1714 else 1715 if (sport->lpuart32) 1716 lpuart32_console_get_options(sport, &baud, &parity, &bits); 1717 else 1718 lpuart_console_get_options(sport, &baud, &parity, &bits); 1719 1720 if (sport->lpuart32) 1721 lpuart32_setup_watermark(sport); 1722 else 1723 lpuart_setup_watermark(sport); 1724 1725 return uart_set_options(&sport->port, co, baud, parity, bits, flow); 1726 } 1727 1728 static struct uart_driver lpuart_reg; 1729 static struct console lpuart_console = { 1730 .name = DEV_NAME, 1731 .write = lpuart_console_write, 1732 .device = uart_console_device, 1733 .setup = lpuart_console_setup, 1734 .flags = CON_PRINTBUFFER, 1735 .index = -1, 1736 .data = &lpuart_reg, 1737 }; 1738 1739 static struct console lpuart32_console = { 1740 .name = DEV_NAME, 1741 .write = lpuart32_console_write, 1742 .device = uart_console_device, 1743 .setup = lpuart_console_setup, 1744 .flags = CON_PRINTBUFFER, 1745 .index = -1, 1746 .data = &lpuart_reg, 1747 }; 1748 1749 #define LPUART_CONSOLE (&lpuart_console) 1750 #define LPUART32_CONSOLE (&lpuart32_console) 1751 #else 1752 #define LPUART_CONSOLE NULL 1753 #define LPUART32_CONSOLE NULL 1754 #endif 1755 1756 static struct uart_driver lpuart_reg = { 1757 .owner = THIS_MODULE, 1758 .driver_name = DRIVER_NAME, 1759 .dev_name = DEV_NAME, 1760 .nr = ARRAY_SIZE(lpuart_ports), 1761 .cons = LPUART_CONSOLE, 1762 }; 1763 1764 static int lpuart_probe(struct platform_device *pdev) 1765 { 1766 struct device_node *np = pdev->dev.of_node; 1767 struct lpuart_port *sport; 1768 struct resource *res; 1769 int ret; 1770 1771 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); 1772 if (!sport) 1773 return -ENOMEM; 1774 1775 pdev->dev.coherent_dma_mask = 0; 1776 1777 ret = of_alias_get_id(np, "serial"); 1778 if (ret < 0) { 1779 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); 1780 return ret; 1781 } 1782 sport->port.line = ret; 1783 sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart"); 1784 1785 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1786 sport->port.membase = devm_ioremap_resource(&pdev->dev, res); 1787 if (IS_ERR(sport->port.membase)) 1788 return PTR_ERR(sport->port.membase); 1789 1790 sport->port.mapbase = res->start; 1791 sport->port.dev = &pdev->dev; 1792 sport->port.type = PORT_LPUART; 1793 sport->port.iotype = UPIO_MEM; 1794 sport->port.irq = platform_get_irq(pdev, 0); 1795 if (sport->lpuart32) 1796 sport->port.ops = &lpuart32_pops; 1797 else 1798 sport->port.ops = &lpuart_pops; 1799 sport->port.flags = UPF_BOOT_AUTOCONF; 1800 1801 sport->clk = devm_clk_get(&pdev->dev, "ipg"); 1802 if (IS_ERR(sport->clk)) { 1803 ret = PTR_ERR(sport->clk); 1804 dev_err(&pdev->dev, "failed to get uart clk: %d\n", ret); 1805 return ret; 1806 } 1807 1808 ret = clk_prepare_enable(sport->clk); 1809 if (ret) { 1810 dev_err(&pdev->dev, "failed to enable uart clk: %d\n", ret); 1811 return ret; 1812 } 1813 1814 sport->port.uartclk = clk_get_rate(sport->clk); 1815 1816 lpuart_ports[sport->port.line] = sport; 1817 1818 platform_set_drvdata(pdev, &sport->port); 1819 1820 if (sport->lpuart32) 1821 lpuart_reg.cons = LPUART32_CONSOLE; 1822 else 1823 lpuart_reg.cons = LPUART_CONSOLE; 1824 1825 ret = uart_add_one_port(&lpuart_reg, &sport->port); 1826 if (ret) { 1827 clk_disable_unprepare(sport->clk); 1828 return ret; 1829 } 1830 1831 sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx"); 1832 if (!sport->dma_tx_chan) 1833 dev_info(sport->port.dev, "DMA tx channel request failed, " 1834 "operating without tx DMA\n"); 1835 1836 sport->dma_rx_chan = dma_request_slave_channel(sport->port.dev, "rx"); 1837 if (!sport->dma_rx_chan) 1838 dev_info(sport->port.dev, "DMA rx channel request failed, " 1839 "operating without rx DMA\n"); 1840 1841 return 0; 1842 } 1843 1844 static int lpuart_remove(struct platform_device *pdev) 1845 { 1846 struct lpuart_port *sport = platform_get_drvdata(pdev); 1847 1848 uart_remove_one_port(&lpuart_reg, &sport->port); 1849 1850 clk_disable_unprepare(sport->clk); 1851 1852 if (sport->dma_tx_chan) 1853 dma_release_channel(sport->dma_tx_chan); 1854 1855 if (sport->dma_rx_chan) 1856 dma_release_channel(sport->dma_rx_chan); 1857 1858 return 0; 1859 } 1860 1861 #ifdef CONFIG_PM_SLEEP 1862 static int lpuart_suspend(struct device *dev) 1863 { 1864 struct lpuart_port *sport = dev_get_drvdata(dev); 1865 unsigned long temp; 1866 1867 if (sport->lpuart32) { 1868 /* disable Rx/Tx and interrupts */ 1869 temp = lpuart32_read(sport->port.membase + UARTCTRL); 1870 temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); 1871 lpuart32_write(temp, sport->port.membase + UARTCTRL); 1872 } else { 1873 /* disable Rx/Tx and interrupts */ 1874 temp = readb(sport->port.membase + UARTCR2); 1875 temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE); 1876 writeb(temp, sport->port.membase + UARTCR2); 1877 } 1878 1879 uart_suspend_port(&lpuart_reg, &sport->port); 1880 1881 return 0; 1882 } 1883 1884 static int lpuart_resume(struct device *dev) 1885 { 1886 struct lpuart_port *sport = dev_get_drvdata(dev); 1887 unsigned long temp; 1888 1889 if (sport->lpuart32) { 1890 lpuart32_setup_watermark(sport); 1891 temp = lpuart32_read(sport->port.membase + UARTCTRL); 1892 temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | 1893 UARTCTRL_TE | UARTCTRL_ILIE); 1894 lpuart32_write(temp, sport->port.membase + UARTCTRL); 1895 } else { 1896 lpuart_setup_watermark(sport); 1897 temp = readb(sport->port.membase + UARTCR2); 1898 temp |= (UARTCR2_RIE | UARTCR2_TIE | UARTCR2_RE | UARTCR2_TE); 1899 writeb(temp, sport->port.membase + UARTCR2); 1900 } 1901 1902 uart_resume_port(&lpuart_reg, &sport->port); 1903 1904 return 0; 1905 } 1906 #endif 1907 1908 static SIMPLE_DEV_PM_OPS(lpuart_pm_ops, lpuart_suspend, lpuart_resume); 1909 1910 static struct platform_driver lpuart_driver = { 1911 .probe = lpuart_probe, 1912 .remove = lpuart_remove, 1913 .driver = { 1914 .name = "fsl-lpuart", 1915 .of_match_table = lpuart_dt_ids, 1916 .pm = &lpuart_pm_ops, 1917 }, 1918 }; 1919 1920 static int __init lpuart_serial_init(void) 1921 { 1922 int ret = uart_register_driver(&lpuart_reg); 1923 1924 if (ret) 1925 return ret; 1926 1927 ret = platform_driver_register(&lpuart_driver); 1928 if (ret) 1929 uart_unregister_driver(&lpuart_reg); 1930 1931 return ret; 1932 } 1933 1934 static void __exit lpuart_serial_exit(void) 1935 { 1936 platform_driver_unregister(&lpuart_driver); 1937 uart_unregister_driver(&lpuart_reg); 1938 } 1939 1940 module_init(lpuart_serial_init); 1941 module_exit(lpuart_serial_exit); 1942 1943 MODULE_DESCRIPTION("Freescale lpuart serial port driver"); 1944 MODULE_LICENSE("GPL v2"); 1945