xref: /linux/drivers/tty/serial/ar933x_uart.c (revision be709d48329a500621d2a05835283150ae137b45)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Atheros AR933X SoC built-in UART driver
4  *
5  *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
6  *
7  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
8  */
9 
10 #include <linux/module.h>
11 #include <linux/ioport.h>
12 #include <linux/init.h>
13 #include <linux/console.h>
14 #include <linux/sysrq.h>
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/of.h>
18 #include <linux/of_platform.h>
19 #include <linux/tty.h>
20 #include <linux/tty_flip.h>
21 #include <linux/serial_core.h>
22 #include <linux/serial.h>
23 #include <linux/slab.h>
24 #include <linux/io.h>
25 #include <linux/irq.h>
26 #include <linux/clk.h>
27 
28 #include <asm/div64.h>
29 
30 #include <asm/mach-ath79/ar933x_uart.h>
31 
32 #define DRIVER_NAME "ar933x-uart"
33 
34 #define AR933X_UART_MAX_SCALE	0xff
35 #define AR933X_UART_MAX_STEP	0xffff
36 
37 #define AR933X_UART_MIN_BAUD	300
38 #define AR933X_UART_MAX_BAUD	3000000
39 
40 #define AR933X_DUMMY_STATUS_RD	0x01
41 
42 static struct uart_driver ar933x_uart_driver;
43 
44 struct ar933x_uart_port {
45 	struct uart_port	port;
46 	unsigned int		ier;	/* shadow Interrupt Enable Register */
47 	unsigned int		min_baud;
48 	unsigned int		max_baud;
49 	struct clk		*clk;
50 };
51 
52 static inline bool ar933x_uart_console_enabled(void)
53 {
54 	return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE);
55 }
56 
57 static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
58 					    int offset)
59 {
60 	return readl(up->port.membase + offset);
61 }
62 
63 static inline void ar933x_uart_write(struct ar933x_uart_port *up,
64 				     int offset, unsigned int value)
65 {
66 	writel(value, up->port.membase + offset);
67 }
68 
69 static inline void ar933x_uart_rmw(struct ar933x_uart_port *up,
70 				  unsigned int offset,
71 				  unsigned int mask,
72 				  unsigned int val)
73 {
74 	unsigned int t;
75 
76 	t = ar933x_uart_read(up, offset);
77 	t &= ~mask;
78 	t |= val;
79 	ar933x_uart_write(up, offset, t);
80 }
81 
82 static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up,
83 				       unsigned int offset,
84 				       unsigned int val)
85 {
86 	ar933x_uart_rmw(up, offset, 0, val);
87 }
88 
89 static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up,
90 					 unsigned int offset,
91 					 unsigned int val)
92 {
93 	ar933x_uart_rmw(up, offset, val, 0);
94 }
95 
96 static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
97 {
98 	up->ier |= AR933X_UART_INT_TX_EMPTY;
99 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
100 }
101 
102 static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
103 {
104 	up->ier &= ~AR933X_UART_INT_TX_EMPTY;
105 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
106 }
107 
108 static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
109 {
110 	unsigned int rdata;
111 
112 	rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
113 	rdata |= AR933X_UART_DATA_TX_CSR;
114 	ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
115 }
116 
117 static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
118 {
119 	struct ar933x_uart_port *up =
120 		container_of(port, struct ar933x_uart_port, port);
121 	unsigned long flags;
122 	unsigned int rdata;
123 
124 	spin_lock_irqsave(&up->port.lock, flags);
125 	rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
126 	spin_unlock_irqrestore(&up->port.lock, flags);
127 
128 	return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT;
129 }
130 
131 static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
132 {
133 	return TIOCM_CAR;
134 }
135 
136 static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
137 {
138 }
139 
140 static void ar933x_uart_start_tx(struct uart_port *port)
141 {
142 	struct ar933x_uart_port *up =
143 		container_of(port, struct ar933x_uart_port, port);
144 
145 	ar933x_uart_start_tx_interrupt(up);
146 }
147 
148 static void ar933x_uart_stop_tx(struct uart_port *port)
149 {
150 	struct ar933x_uart_port *up =
151 		container_of(port, struct ar933x_uart_port, port);
152 
153 	ar933x_uart_stop_tx_interrupt(up);
154 }
155 
156 static void ar933x_uart_stop_rx(struct uart_port *port)
157 {
158 	struct ar933x_uart_port *up =
159 		container_of(port, struct ar933x_uart_port, port);
160 
161 	up->ier &= ~AR933X_UART_INT_RX_VALID;
162 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
163 }
164 
165 static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
166 {
167 	struct ar933x_uart_port *up =
168 		container_of(port, struct ar933x_uart_port, port);
169 	unsigned long flags;
170 
171 	spin_lock_irqsave(&up->port.lock, flags);
172 	if (break_state == -1)
173 		ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
174 				    AR933X_UART_CS_TX_BREAK);
175 	else
176 		ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
177 				      AR933X_UART_CS_TX_BREAK);
178 	spin_unlock_irqrestore(&up->port.lock, flags);
179 }
180 
181 /*
182  * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
183  */
184 static unsigned long ar933x_uart_get_baud(unsigned int clk,
185 					  unsigned int scale,
186 					  unsigned int step)
187 {
188 	u64 t;
189 	u32 div;
190 
191 	div = (2 << 16) * (scale + 1);
192 	t = clk;
193 	t *= step;
194 	t += (div / 2);
195 	do_div(t, div);
196 
197 	return t;
198 }
199 
200 static void ar933x_uart_get_scale_step(unsigned int clk,
201 				       unsigned int baud,
202 				       unsigned int *scale,
203 				       unsigned int *step)
204 {
205 	unsigned int tscale;
206 	long min_diff;
207 
208 	*scale = 0;
209 	*step = 0;
210 
211 	min_diff = baud;
212 	for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
213 		u64 tstep;
214 		int diff;
215 
216 		tstep = baud * (tscale + 1);
217 		tstep *= (2 << 16);
218 		do_div(tstep, clk);
219 
220 		if (tstep > AR933X_UART_MAX_STEP)
221 			break;
222 
223 		diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
224 		if (diff < min_diff) {
225 			min_diff = diff;
226 			*scale = tscale;
227 			*step = tstep;
228 		}
229 	}
230 }
231 
232 static void ar933x_uart_set_termios(struct uart_port *port,
233 				    struct ktermios *new,
234 				    struct ktermios *old)
235 {
236 	struct ar933x_uart_port *up =
237 		container_of(port, struct ar933x_uart_port, port);
238 	unsigned int cs;
239 	unsigned long flags;
240 	unsigned int baud, scale, step;
241 
242 	/* Only CS8 is supported */
243 	new->c_cflag &= ~CSIZE;
244 	new->c_cflag |= CS8;
245 
246 	/* Only one stop bit is supported */
247 	new->c_cflag &= ~CSTOPB;
248 
249 	cs = 0;
250 	if (new->c_cflag & PARENB) {
251 		if (!(new->c_cflag & PARODD))
252 			cs |= AR933X_UART_CS_PARITY_EVEN;
253 		else
254 			cs |= AR933X_UART_CS_PARITY_ODD;
255 	} else {
256 		cs |= AR933X_UART_CS_PARITY_NONE;
257 	}
258 
259 	/* Mark/space parity is not supported */
260 	new->c_cflag &= ~CMSPAR;
261 
262 	baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
263 	ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
264 
265 	/*
266 	 * Ok, we're now changing the port state. Do it with
267 	 * interrupts disabled.
268 	 */
269 	spin_lock_irqsave(&up->port.lock, flags);
270 
271 	/* disable the UART */
272 	ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
273 		      AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
274 
275 	/* Update the per-port timeout. */
276 	uart_update_timeout(port, new->c_cflag, baud);
277 
278 	up->port.ignore_status_mask = 0;
279 
280 	/* ignore all characters if CREAD is not set */
281 	if ((new->c_cflag & CREAD) == 0)
282 		up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
283 
284 	ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
285 			  scale << AR933X_UART_CLOCK_SCALE_S | step);
286 
287 	/* setup configuration register */
288 	ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
289 
290 	/* enable host interrupt */
291 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
292 			    AR933X_UART_CS_HOST_INT_EN);
293 
294 	/* reenable the UART */
295 	ar933x_uart_rmw(up, AR933X_UART_CS_REG,
296 			AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
297 			AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
298 
299 	spin_unlock_irqrestore(&up->port.lock, flags);
300 
301 	if (tty_termios_baud_rate(new))
302 		tty_termios_encode_baud_rate(new, baud, baud);
303 }
304 
305 static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
306 {
307 	struct tty_port *port = &up->port.state->port;
308 	int max_count = 256;
309 
310 	do {
311 		unsigned int rdata;
312 		unsigned char ch;
313 
314 		rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
315 		if ((rdata & AR933X_UART_DATA_RX_CSR) == 0)
316 			break;
317 
318 		/* remove the character from the FIFO */
319 		ar933x_uart_write(up, AR933X_UART_DATA_REG,
320 				  AR933X_UART_DATA_RX_CSR);
321 
322 		up->port.icount.rx++;
323 		ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
324 
325 		if (uart_handle_sysrq_char(&up->port, ch))
326 			continue;
327 
328 		if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
329 			tty_insert_flip_char(port, ch, TTY_NORMAL);
330 	} while (max_count-- > 0);
331 
332 	spin_unlock(&up->port.lock);
333 	tty_flip_buffer_push(port);
334 	spin_lock(&up->port.lock);
335 }
336 
337 static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
338 {
339 	struct circ_buf *xmit = &up->port.state->xmit;
340 	int count;
341 
342 	if (uart_tx_stopped(&up->port))
343 		return;
344 
345 	count = up->port.fifosize;
346 	do {
347 		unsigned int rdata;
348 
349 		rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
350 		if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
351 			break;
352 
353 		if (up->port.x_char) {
354 			ar933x_uart_putc(up, up->port.x_char);
355 			up->port.icount.tx++;
356 			up->port.x_char = 0;
357 			continue;
358 		}
359 
360 		if (uart_circ_empty(xmit))
361 			break;
362 
363 		ar933x_uart_putc(up, xmit->buf[xmit->tail]);
364 
365 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
366 		up->port.icount.tx++;
367 	} while (--count > 0);
368 
369 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
370 		uart_write_wakeup(&up->port);
371 
372 	if (!uart_circ_empty(xmit))
373 		ar933x_uart_start_tx_interrupt(up);
374 }
375 
376 static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
377 {
378 	struct ar933x_uart_port *up = dev_id;
379 	unsigned int status;
380 
381 	status = ar933x_uart_read(up, AR933X_UART_CS_REG);
382 	if ((status & AR933X_UART_CS_HOST_INT) == 0)
383 		return IRQ_NONE;
384 
385 	spin_lock(&up->port.lock);
386 
387 	status = ar933x_uart_read(up, AR933X_UART_INT_REG);
388 	status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
389 
390 	if (status & AR933X_UART_INT_RX_VALID) {
391 		ar933x_uart_write(up, AR933X_UART_INT_REG,
392 				  AR933X_UART_INT_RX_VALID);
393 		ar933x_uart_rx_chars(up);
394 	}
395 
396 	if (status & AR933X_UART_INT_TX_EMPTY) {
397 		ar933x_uart_write(up, AR933X_UART_INT_REG,
398 				  AR933X_UART_INT_TX_EMPTY);
399 		ar933x_uart_stop_tx_interrupt(up);
400 		ar933x_uart_tx_chars(up);
401 	}
402 
403 	spin_unlock(&up->port.lock);
404 
405 	return IRQ_HANDLED;
406 }
407 
408 static int ar933x_uart_startup(struct uart_port *port)
409 {
410 	struct ar933x_uart_port *up =
411 		container_of(port, struct ar933x_uart_port, port);
412 	unsigned long flags;
413 	int ret;
414 
415 	ret = request_irq(up->port.irq, ar933x_uart_interrupt,
416 			  up->port.irqflags, dev_name(up->port.dev), up);
417 	if (ret)
418 		return ret;
419 
420 	spin_lock_irqsave(&up->port.lock, flags);
421 
422 	/* Enable HOST interrupts */
423 	ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
424 			    AR933X_UART_CS_HOST_INT_EN);
425 
426 	/* Enable RX interrupts */
427 	up->ier = AR933X_UART_INT_RX_VALID;
428 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
429 
430 	spin_unlock_irqrestore(&up->port.lock, flags);
431 
432 	return 0;
433 }
434 
435 static void ar933x_uart_shutdown(struct uart_port *port)
436 {
437 	struct ar933x_uart_port *up =
438 		container_of(port, struct ar933x_uart_port, port);
439 
440 	/* Disable all interrupts */
441 	up->ier = 0;
442 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
443 
444 	/* Disable break condition */
445 	ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
446 			      AR933X_UART_CS_TX_BREAK);
447 
448 	free_irq(up->port.irq, up);
449 }
450 
451 static const char *ar933x_uart_type(struct uart_port *port)
452 {
453 	return (port->type == PORT_AR933X) ? "AR933X UART" : NULL;
454 }
455 
456 static void ar933x_uart_release_port(struct uart_port *port)
457 {
458 	/* Nothing to release ... */
459 }
460 
461 static int ar933x_uart_request_port(struct uart_port *port)
462 {
463 	/* UARTs always present */
464 	return 0;
465 }
466 
467 static void ar933x_uart_config_port(struct uart_port *port, int flags)
468 {
469 	if (flags & UART_CONFIG_TYPE)
470 		port->type = PORT_AR933X;
471 }
472 
473 static int ar933x_uart_verify_port(struct uart_port *port,
474 				   struct serial_struct *ser)
475 {
476 	struct ar933x_uart_port *up =
477 		container_of(port, struct ar933x_uart_port, port);
478 
479 	if (ser->type != PORT_UNKNOWN &&
480 	    ser->type != PORT_AR933X)
481 		return -EINVAL;
482 
483 	if (ser->irq < 0 || ser->irq >= NR_IRQS)
484 		return -EINVAL;
485 
486 	if (ser->baud_base < up->min_baud ||
487 	    ser->baud_base > up->max_baud)
488 		return -EINVAL;
489 
490 	return 0;
491 }
492 
493 static const struct uart_ops ar933x_uart_ops = {
494 	.tx_empty	= ar933x_uart_tx_empty,
495 	.set_mctrl	= ar933x_uart_set_mctrl,
496 	.get_mctrl	= ar933x_uart_get_mctrl,
497 	.stop_tx	= ar933x_uart_stop_tx,
498 	.start_tx	= ar933x_uart_start_tx,
499 	.stop_rx	= ar933x_uart_stop_rx,
500 	.break_ctl	= ar933x_uart_break_ctl,
501 	.startup	= ar933x_uart_startup,
502 	.shutdown	= ar933x_uart_shutdown,
503 	.set_termios	= ar933x_uart_set_termios,
504 	.type		= ar933x_uart_type,
505 	.release_port	= ar933x_uart_release_port,
506 	.request_port	= ar933x_uart_request_port,
507 	.config_port	= ar933x_uart_config_port,
508 	.verify_port	= ar933x_uart_verify_port,
509 };
510 
511 static struct ar933x_uart_port *
512 ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
513 
514 static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up)
515 {
516 	unsigned int status;
517 	unsigned int timeout = 60000;
518 
519 	/* Wait up to 60ms for the character(s) to be sent. */
520 	do {
521 		status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
522 		if (--timeout == 0)
523 			break;
524 		udelay(1);
525 	} while ((status & AR933X_UART_DATA_TX_CSR) == 0);
526 }
527 
528 static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
529 {
530 	struct ar933x_uart_port *up =
531 		container_of(port, struct ar933x_uart_port, port);
532 
533 	ar933x_uart_wait_xmitr(up);
534 	ar933x_uart_putc(up, ch);
535 }
536 
537 static void ar933x_uart_console_write(struct console *co, const char *s,
538 				      unsigned int count)
539 {
540 	struct ar933x_uart_port *up = ar933x_console_ports[co->index];
541 	unsigned long flags;
542 	unsigned int int_en;
543 	int locked = 1;
544 
545 	local_irq_save(flags);
546 
547 	if (up->port.sysrq)
548 		locked = 0;
549 	else if (oops_in_progress)
550 		locked = spin_trylock(&up->port.lock);
551 	else
552 		spin_lock(&up->port.lock);
553 
554 	/*
555 	 * First save the IER then disable the interrupts
556 	 */
557 	int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
558 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
559 
560 	uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
561 
562 	/*
563 	 * Finally, wait for transmitter to become empty
564 	 * and restore the IER
565 	 */
566 	ar933x_uart_wait_xmitr(up);
567 	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en);
568 
569 	ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
570 
571 	if (locked)
572 		spin_unlock(&up->port.lock);
573 
574 	local_irq_restore(flags);
575 }
576 
577 static int ar933x_uart_console_setup(struct console *co, char *options)
578 {
579 	struct ar933x_uart_port *up;
580 	int baud = 115200;
581 	int bits = 8;
582 	int parity = 'n';
583 	int flow = 'n';
584 
585 	if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS)
586 		return -EINVAL;
587 
588 	up = ar933x_console_ports[co->index];
589 	if (!up)
590 		return -ENODEV;
591 
592 	if (options)
593 		uart_parse_options(options, &baud, &parity, &bits, &flow);
594 
595 	return uart_set_options(&up->port, co, baud, parity, bits, flow);
596 }
597 
598 static struct console ar933x_uart_console = {
599 	.name		= "ttyATH",
600 	.write		= ar933x_uart_console_write,
601 	.device		= uart_console_device,
602 	.setup		= ar933x_uart_console_setup,
603 	.flags		= CON_PRINTBUFFER,
604 	.index		= -1,
605 	.data		= &ar933x_uart_driver,
606 };
607 
608 static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
609 {
610 	if (!ar933x_uart_console_enabled())
611 		return;
612 
613 	ar933x_console_ports[up->port.line] = up;
614 }
615 
616 static struct uart_driver ar933x_uart_driver = {
617 	.owner		= THIS_MODULE,
618 	.driver_name	= DRIVER_NAME,
619 	.dev_name	= "ttyATH",
620 	.nr		= CONFIG_SERIAL_AR933X_NR_UARTS,
621 	.cons		= NULL, /* filled in runtime */
622 };
623 
624 static int ar933x_uart_probe(struct platform_device *pdev)
625 {
626 	struct ar933x_uart_port *up;
627 	struct uart_port *port;
628 	struct resource *mem_res;
629 	struct resource *irq_res;
630 	struct device_node *np;
631 	unsigned int baud;
632 	int id;
633 	int ret;
634 
635 	np = pdev->dev.of_node;
636 	if (IS_ENABLED(CONFIG_OF) && np) {
637 		id = of_alias_get_id(np, "serial");
638 		if (id < 0) {
639 			dev_err(&pdev->dev, "unable to get alias id, err=%d\n",
640 				id);
641 			return id;
642 		}
643 	} else {
644 		id = pdev->id;
645 		if (id == -1)
646 			id = 0;
647 	}
648 
649 	if (id >= CONFIG_SERIAL_AR933X_NR_UARTS)
650 		return -EINVAL;
651 
652 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
653 	if (!irq_res) {
654 		dev_err(&pdev->dev, "no IRQ resource\n");
655 		return -EINVAL;
656 	}
657 
658 	up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port),
659 			  GFP_KERNEL);
660 	if (!up)
661 		return -ENOMEM;
662 
663 	up->clk = devm_clk_get(&pdev->dev, "uart");
664 	if (IS_ERR(up->clk)) {
665 		dev_err(&pdev->dev, "unable to get UART clock\n");
666 		return PTR_ERR(up->clk);
667 	}
668 
669 	port = &up->port;
670 
671 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
672 	port->membase = devm_ioremap_resource(&pdev->dev, mem_res);
673 	if (IS_ERR(port->membase))
674 		return PTR_ERR(port->membase);
675 
676 	ret = clk_prepare_enable(up->clk);
677 	if (ret)
678 		return ret;
679 
680 	port->uartclk = clk_get_rate(up->clk);
681 	if (!port->uartclk) {
682 		ret = -EINVAL;
683 		goto err_disable_clk;
684 	}
685 
686 	port->mapbase = mem_res->start;
687 	port->line = id;
688 	port->irq = irq_res->start;
689 	port->dev = &pdev->dev;
690 	port->type = PORT_AR933X;
691 	port->iotype = UPIO_MEM32;
692 
693 	port->regshift = 2;
694 	port->fifosize = AR933X_UART_FIFO_SIZE;
695 	port->ops = &ar933x_uart_ops;
696 
697 	baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
698 	up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
699 
700 	baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
701 	up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
702 
703 	ar933x_uart_add_console_port(up);
704 
705 	ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
706 	if (ret)
707 		goto err_disable_clk;
708 
709 	platform_set_drvdata(pdev, up);
710 	return 0;
711 
712 err_disable_clk:
713 	clk_disable_unprepare(up->clk);
714 	return ret;
715 }
716 
717 static int ar933x_uart_remove(struct platform_device *pdev)
718 {
719 	struct ar933x_uart_port *up;
720 
721 	up = platform_get_drvdata(pdev);
722 
723 	if (up) {
724 		uart_remove_one_port(&ar933x_uart_driver, &up->port);
725 		clk_disable_unprepare(up->clk);
726 	}
727 
728 	return 0;
729 }
730 
731 #ifdef CONFIG_OF
732 static const struct of_device_id ar933x_uart_of_ids[] = {
733 	{ .compatible = "qca,ar9330-uart" },
734 	{},
735 };
736 MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids);
737 #endif
738 
739 static struct platform_driver ar933x_uart_platform_driver = {
740 	.probe		= ar933x_uart_probe,
741 	.remove		= ar933x_uart_remove,
742 	.driver		= {
743 		.name		= DRIVER_NAME,
744 		.of_match_table = of_match_ptr(ar933x_uart_of_ids),
745 	},
746 };
747 
748 static int __init ar933x_uart_init(void)
749 {
750 	int ret;
751 
752 	if (ar933x_uart_console_enabled())
753 		ar933x_uart_driver.cons = &ar933x_uart_console;
754 
755 	ret = uart_register_driver(&ar933x_uart_driver);
756 	if (ret)
757 		goto err_out;
758 
759 	ret = platform_driver_register(&ar933x_uart_platform_driver);
760 	if (ret)
761 		goto err_unregister_uart_driver;
762 
763 	return 0;
764 
765 err_unregister_uart_driver:
766 	uart_unregister_driver(&ar933x_uart_driver);
767 err_out:
768 	return ret;
769 }
770 
771 static void __exit ar933x_uart_exit(void)
772 {
773 	platform_driver_unregister(&ar933x_uart_platform_driver);
774 	uart_unregister_driver(&ar933x_uart_driver);
775 }
776 
777 module_init(ar933x_uart_init);
778 module_exit(ar933x_uart_exit);
779 
780 MODULE_DESCRIPTION("Atheros AR933X UART driver");
781 MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
782 MODULE_LICENSE("GPL v2");
783 MODULE_ALIAS("platform:" DRIVER_NAME);
784