1 /*====================================================================== 2 3 A driver for PCMCIA serial devices 4 5 serial_cs.c 1.134 2002/05/04 05:48:53 6 7 The contents of this file are subject to the Mozilla Public 8 License Version 1.1 (the "License"); you may not use this file 9 except in compliance with the License. You may obtain a copy of 10 the License at http://www.mozilla.org/MPL/ 11 12 Software distributed under the License is distributed on an "AS 13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or 14 implied. See the License for the specific language governing 15 rights and limitations under the License. 16 17 The initial developer of the original code is David A. Hinds 18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 20 21 Alternatively, the contents of this file may be used under the 22 terms of the GNU General Public License version 2 (the "GPL"), in which 23 case the provisions of the GPL are applicable instead of the 24 above. If you wish to allow the use of your version of this file 25 only under the terms of the GPL and not to allow others to use 26 your version of this file under the MPL, indicate your decision 27 by deleting the provisions above and replace them with the notice 28 and other provisions required by the GPL. If you do not delete 29 the provisions above, a recipient may use your version of this 30 file under either the MPL or the GPL. 31 32 ======================================================================*/ 33 34 #include <linux/module.h> 35 #include <linux/moduleparam.h> 36 #include <linux/kernel.h> 37 #include <linux/ptrace.h> 38 #include <linux/slab.h> 39 #include <linux/string.h> 40 #include <linux/timer.h> 41 #include <linux/serial_core.h> 42 #include <linux/delay.h> 43 #include <linux/major.h> 44 #include <asm/io.h> 45 46 #include <pcmcia/cistpl.h> 47 #include <pcmcia/ciscode.h> 48 #include <pcmcia/ds.h> 49 #include <pcmcia/cisreg.h> 50 51 #include "8250.h" 52 53 54 /*====================================================================*/ 55 56 /* Parameters that can be set with 'insmod' */ 57 58 /* Enable the speaker? */ 59 static int do_sound = 1; 60 /* Skip strict UART tests? */ 61 static int buggy_uart; 62 63 module_param(do_sound, int, 0444); 64 module_param(buggy_uart, int, 0444); 65 66 /*====================================================================*/ 67 68 /* Table of multi-port card ID's */ 69 70 struct serial_quirk { 71 unsigned int manfid; 72 unsigned int prodid; 73 int multi; /* 1 = multifunction, > 1 = # ports */ 74 void (*config)(struct pcmcia_device *); 75 void (*setup)(struct pcmcia_device *, struct uart_8250_port *); 76 void (*wakeup)(struct pcmcia_device *); 77 int (*post)(struct pcmcia_device *); 78 }; 79 80 struct serial_info { 81 struct pcmcia_device *p_dev; 82 int ndev; 83 int multi; 84 int slave; 85 int manfid; 86 int prodid; 87 int c950ctrl; 88 int line[4]; 89 const struct serial_quirk *quirk; 90 }; 91 92 struct serial_cfg_mem { 93 tuple_t tuple; 94 cisparse_t parse; 95 u_char buf[256]; 96 }; 97 98 /* 99 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" 100 * manfid 0x0160, 0x0104 101 * This card appears to have a 14.7456MHz clock. 102 */ 103 /* Generic Modem: MD55x (GPRS/EDGE) have 104 * Elan VPU16551 UART with 14.7456MHz oscillator 105 * manfid 0x015D, 0x4C45 106 */ 107 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart) 108 { 109 uart->port.uartclk = 14745600; 110 } 111 112 static int quirk_post_ibm(struct pcmcia_device *link) 113 { 114 u8 val; 115 int ret; 116 117 ret = pcmcia_read_config_byte(link, 0x800, &val); 118 if (ret) 119 goto failed; 120 121 ret = pcmcia_write_config_byte(link, 0x800, val | 1); 122 if (ret) 123 goto failed; 124 return 0; 125 126 failed: 127 return -ENODEV; 128 } 129 130 /* 131 * Nokia cards are not really multiport cards. Shouldn't this 132 * be handled by setting the quirk entry .multi = 0 | 1 ? 133 */ 134 static void quirk_config_nokia(struct pcmcia_device *link) 135 { 136 struct serial_info *info = link->priv; 137 138 if (info->multi > 1) 139 info->multi = 1; 140 } 141 142 static void quirk_wakeup_oxsemi(struct pcmcia_device *link) 143 { 144 struct serial_info *info = link->priv; 145 146 if (info->c950ctrl) 147 outb(12, info->c950ctrl + 1); 148 } 149 150 /* request_region? oxsemi branch does no request_region too... */ 151 /* 152 * This sequence is needed to properly initialize MC45 attached to OXCF950. 153 * I tried decreasing these msleep()s, but it worked properly (survived 154 * 1000 stop/start operations) with these timeouts (or bigger). 155 */ 156 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) 157 { 158 struct serial_info *info = link->priv; 159 unsigned int ctrl = info->c950ctrl; 160 161 outb(0xA, ctrl + 1); 162 msleep(100); 163 outb(0xE, ctrl + 1); 164 msleep(300); 165 outb(0xC, ctrl + 1); 166 msleep(100); 167 outb(0xE, ctrl + 1); 168 msleep(200); 169 outb(0xF, ctrl + 1); 170 msleep(100); 171 outb(0xE, ctrl + 1); 172 msleep(100); 173 outb(0xC, ctrl + 1); 174 } 175 176 /* 177 * Socket Dual IO: this enables irq's for second port 178 */ 179 static void quirk_config_socket(struct pcmcia_device *link) 180 { 181 struct serial_info *info = link->priv; 182 183 if (info->multi) 184 link->config_flags |= CONF_ENABLE_ESR; 185 } 186 187 static const struct serial_quirk quirks[] = { 188 { 189 .manfid = 0x0160, 190 .prodid = 0x0104, 191 .multi = -1, 192 .setup = quirk_setup_brainboxes_0104, 193 }, { 194 .manfid = 0x015D, 195 .prodid = 0x4C45, 196 .multi = -1, 197 .setup = quirk_setup_brainboxes_0104, 198 }, { 199 .manfid = MANFID_IBM, 200 .prodid = ~0, 201 .multi = -1, 202 .post = quirk_post_ibm, 203 }, { 204 .manfid = MANFID_INTEL, 205 .prodid = PRODID_INTEL_DUAL_RS232, 206 .multi = 2, 207 }, { 208 .manfid = MANFID_NATINST, 209 .prodid = PRODID_NATINST_QUAD_RS232, 210 .multi = 4, 211 }, { 212 .manfid = MANFID_NOKIA, 213 .prodid = ~0, 214 .multi = -1, 215 .config = quirk_config_nokia, 216 }, { 217 .manfid = MANFID_OMEGA, 218 .prodid = PRODID_OMEGA_QSP_100, 219 .multi = 4, 220 }, { 221 .manfid = MANFID_OXSEMI, 222 .prodid = ~0, 223 .multi = -1, 224 .wakeup = quirk_wakeup_oxsemi, 225 }, { 226 .manfid = MANFID_POSSIO, 227 .prodid = PRODID_POSSIO_GCC, 228 .multi = -1, 229 .wakeup = quirk_wakeup_possio_gcc, 230 }, { 231 .manfid = MANFID_QUATECH, 232 .prodid = PRODID_QUATECH_DUAL_RS232, 233 .multi = 2, 234 }, { 235 .manfid = MANFID_QUATECH, 236 .prodid = PRODID_QUATECH_DUAL_RS232_D1, 237 .multi = 2, 238 }, { 239 .manfid = MANFID_QUATECH, 240 .prodid = PRODID_QUATECH_DUAL_RS232_G, 241 .multi = 2, 242 }, { 243 .manfid = MANFID_QUATECH, 244 .prodid = PRODID_QUATECH_QUAD_RS232, 245 .multi = 4, 246 }, { 247 .manfid = MANFID_SOCKET, 248 .prodid = PRODID_SOCKET_DUAL_RS232, 249 .multi = 2, 250 .config = quirk_config_socket, 251 }, { 252 .manfid = MANFID_SOCKET, 253 .prodid = ~0, 254 .multi = -1, 255 .config = quirk_config_socket, 256 } 257 }; 258 259 260 static int serial_config(struct pcmcia_device * link); 261 262 263 static void serial_remove(struct pcmcia_device *link) 264 { 265 struct serial_info *info = link->priv; 266 int i; 267 268 dev_dbg(&link->dev, "serial_release\n"); 269 270 /* 271 * Recheck to see if the device is still configured. 272 */ 273 for (i = 0; i < info->ndev; i++) 274 serial8250_unregister_port(info->line[i]); 275 276 if (!info->slave) 277 pcmcia_disable_device(link); 278 } 279 280 static int serial_suspend(struct pcmcia_device *link) 281 { 282 struct serial_info *info = link->priv; 283 int i; 284 285 for (i = 0; i < info->ndev; i++) 286 serial8250_suspend_port(info->line[i]); 287 288 return 0; 289 } 290 291 static int serial_resume(struct pcmcia_device *link) 292 { 293 struct serial_info *info = link->priv; 294 int i; 295 296 for (i = 0; i < info->ndev; i++) 297 serial8250_resume_port(info->line[i]); 298 299 if (info->quirk && info->quirk->wakeup) 300 info->quirk->wakeup(link); 301 302 return 0; 303 } 304 305 static int serial_probe(struct pcmcia_device *link) 306 { 307 struct serial_info *info; 308 309 dev_dbg(&link->dev, "serial_attach()\n"); 310 311 /* Create new serial device */ 312 info = kzalloc(sizeof (*info), GFP_KERNEL); 313 if (!info) 314 return -ENOMEM; 315 info->p_dev = link; 316 link->priv = info; 317 318 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 319 if (do_sound) 320 link->config_flags |= CONF_ENABLE_SPKR; 321 322 return serial_config(link); 323 } 324 325 static void serial_detach(struct pcmcia_device *link) 326 { 327 struct serial_info *info = link->priv; 328 329 dev_dbg(&link->dev, "serial_detach\n"); 330 331 /* 332 * Ensure that the ports have been released. 333 */ 334 serial_remove(link); 335 336 /* free bits */ 337 kfree(info); 338 } 339 340 /*====================================================================*/ 341 342 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, 343 unsigned int iobase, int irq) 344 { 345 struct uart_8250_port uart; 346 int line; 347 348 memset(&uart, 0, sizeof(uart)); 349 uart.port.iobase = iobase; 350 uart.port.irq = irq; 351 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; 352 uart.port.uartclk = 1843200; 353 uart.port.dev = &handle->dev; 354 if (buggy_uart) 355 uart.port.flags |= UPF_BUGGY_UART; 356 357 if (info->quirk && info->quirk->setup) 358 info->quirk->setup(handle, &uart); 359 360 line = serial8250_register_8250_port(&uart); 361 if (line < 0) { 362 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n", 363 (unsigned long)iobase, irq); 364 return -EINVAL; 365 } 366 367 info->line[info->ndev] = line; 368 info->ndev++; 369 370 return 0; 371 } 372 373 /*====================================================================*/ 374 375 static int pfc_config(struct pcmcia_device *p_dev) 376 { 377 unsigned int port = 0; 378 struct serial_info *info = p_dev->priv; 379 380 if ((p_dev->resource[1]->end != 0) && 381 (resource_size(p_dev->resource[1]) == 8)) { 382 port = p_dev->resource[1]->start; 383 info->slave = 1; 384 } else if ((info->manfid == MANFID_OSITECH) && 385 (resource_size(p_dev->resource[0]) == 0x40)) { 386 port = p_dev->resource[0]->start + 0x28; 387 info->slave = 1; 388 } 389 if (info->slave) 390 return setup_serial(p_dev, info, port, p_dev->irq); 391 392 dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); 393 return -ENODEV; 394 } 395 396 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) 397 { 398 static const int size_table[2] = { 8, 16 }; 399 int *try = priv_data; 400 401 if (p_dev->resource[0]->start == 0) 402 return -ENODEV; 403 404 if ((*try & 0x1) == 0) 405 p_dev->io_lines = 16; 406 407 if (p_dev->resource[0]->end != size_table[(*try >> 1)]) 408 return -ENODEV; 409 410 p_dev->resource[0]->end = 8; 411 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 412 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 413 414 return pcmcia_request_io(p_dev); 415 } 416 417 static int simple_config_check_notpicky(struct pcmcia_device *p_dev, 418 void *priv_data) 419 { 420 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; 421 int j; 422 423 if (p_dev->io_lines > 3) 424 return -ENODEV; 425 426 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 427 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 428 p_dev->resource[0]->end = 8; 429 430 for (j = 0; j < 5; j++) { 431 p_dev->resource[0]->start = base[j]; 432 p_dev->io_lines = base[j] ? 16 : 3; 433 if (!pcmcia_request_io(p_dev)) 434 return 0; 435 } 436 return -ENODEV; 437 } 438 439 static int simple_config(struct pcmcia_device *link) 440 { 441 struct serial_info *info = link->priv; 442 int i = -ENODEV, try; 443 444 /* First pass: look for a config entry that looks normal. 445 * Two tries: without IO aliases, then with aliases */ 446 link->config_flags |= CONF_AUTO_SET_VPP; 447 for (try = 0; try < 4; try++) 448 if (!pcmcia_loop_config(link, simple_config_check, &try)) 449 goto found_port; 450 451 /* Second pass: try to find an entry that isn't picky about 452 its base address, then try to grab any standard serial port 453 address, and finally try to get any free port. */ 454 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) 455 goto found_port; 456 457 dev_warn(&link->dev, "no usable port range found, giving up\n"); 458 return -1; 459 460 found_port: 461 if (info->multi && (info->manfid == MANFID_3COM)) 462 link->config_index &= ~(0x08); 463 464 /* 465 * Apply any configuration quirks. 466 */ 467 if (info->quirk && info->quirk->config) 468 info->quirk->config(link); 469 470 i = pcmcia_enable_device(link); 471 if (i != 0) 472 return -1; 473 return setup_serial(link, info, link->resource[0]->start, link->irq); 474 } 475 476 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) 477 { 478 int *multi = priv_data; 479 480 if (p_dev->resource[1]->end) 481 return -EINVAL; 482 483 /* The quad port cards have bad CIS's, so just look for a 484 window larger than 8 ports and assume it will be right */ 485 if (p_dev->resource[0]->end <= 8) 486 return -EINVAL; 487 488 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 489 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 490 p_dev->resource[0]->end = *multi * 8; 491 492 if (pcmcia_request_io(p_dev)) 493 return -ENODEV; 494 return 0; 495 } 496 497 static int multi_config_check_notpicky(struct pcmcia_device *p_dev, 498 void *priv_data) 499 { 500 int *base2 = priv_data; 501 502 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || 503 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) 504 return -ENODEV; 505 506 p_dev->resource[0]->end = p_dev->resource[1]->end = 8; 507 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 508 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; 509 510 if (pcmcia_request_io(p_dev)) 511 return -ENODEV; 512 513 *base2 = p_dev->resource[0]->start + 8; 514 return 0; 515 } 516 517 static int multi_config(struct pcmcia_device *link) 518 { 519 struct serial_info *info = link->priv; 520 int i, base2 = 0; 521 522 /* First, look for a generic full-sized window */ 523 if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) 524 base2 = link->resource[0]->start + 8; 525 else { 526 /* If that didn't work, look for two windows */ 527 info->multi = 2; 528 if (pcmcia_loop_config(link, multi_config_check_notpicky, 529 &base2)) { 530 dev_warn(&link->dev, "no usable port range " 531 "found, giving up\n"); 532 return -ENODEV; 533 } 534 } 535 536 if (!link->irq) 537 dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); 538 539 /* 540 * Apply any configuration quirks. 541 */ 542 if (info->quirk && info->quirk->config) 543 info->quirk->config(link); 544 545 i = pcmcia_enable_device(link); 546 if (i != 0) 547 return -ENODEV; 548 549 /* The Oxford Semiconductor OXCF950 cards are in fact single-port: 550 * 8 registers are for the UART, the others are extra registers. 551 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. 552 */ 553 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && 554 info->prodid == PRODID_POSSIO_GCC)) { 555 int err; 556 557 if (link->config_index == 1 || 558 link->config_index == 3) { 559 err = setup_serial(link, info, base2, 560 link->irq); 561 base2 = link->resource[0]->start; 562 } else { 563 err = setup_serial(link, info, link->resource[0]->start, 564 link->irq); 565 } 566 info->c950ctrl = base2; 567 568 /* 569 * FIXME: We really should wake up the port prior to 570 * handing it over to the serial layer. 571 */ 572 if (info->quirk && info->quirk->wakeup) 573 info->quirk->wakeup(link); 574 575 return 0; 576 } 577 578 setup_serial(link, info, link->resource[0]->start, link->irq); 579 for (i = 0; i < info->multi - 1; i++) 580 setup_serial(link, info, base2 + (8 * i), 581 link->irq); 582 return 0; 583 } 584 585 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) 586 { 587 struct serial_info *info = p_dev->priv; 588 589 if (!p_dev->resource[0]->end) 590 return -EINVAL; 591 592 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) 593 info->multi = p_dev->resource[0]->end >> 3; 594 595 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) 596 && (p_dev->resource[1]->end == 8)) 597 info->multi = 2; 598 599 return 0; /* break */ 600 } 601 602 603 static int serial_config(struct pcmcia_device * link) 604 { 605 struct serial_info *info = link->priv; 606 int i; 607 608 dev_dbg(&link->dev, "serial_config\n"); 609 610 /* Is this a compliant multifunction card? */ 611 info->multi = (link->socket->functions > 1); 612 613 /* Is this a multiport card? */ 614 info->manfid = link->manf_id; 615 info->prodid = link->card_id; 616 617 for (i = 0; i < ARRAY_SIZE(quirks); i++) 618 if ((quirks[i].manfid == ~0 || 619 quirks[i].manfid == info->manfid) && 620 (quirks[i].prodid == ~0 || 621 quirks[i].prodid == info->prodid)) { 622 info->quirk = &quirks[i]; 623 break; 624 } 625 626 /* Another check for dual-serial cards: look for either serial or 627 multifunction cards that ask for appropriate IO port ranges */ 628 if ((info->multi == 0) && 629 (link->has_func_id) && 630 (link->socket->pcmcia_pfc == 0) && 631 ((link->func_id == CISTPL_FUNCID_MULTI) || 632 (link->func_id == CISTPL_FUNCID_SERIAL))) 633 pcmcia_loop_config(link, serial_check_for_multi, info); 634 635 /* 636 * Apply any multi-port quirk. 637 */ 638 if (info->quirk && info->quirk->multi != -1) 639 info->multi = info->quirk->multi; 640 641 dev_info(&link->dev, 642 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", 643 link->manf_id, link->card_id, 644 link->socket->pcmcia_pfc, info->multi, info->quirk); 645 if (link->socket->pcmcia_pfc) 646 i = pfc_config(link); 647 else if (info->multi > 1) 648 i = multi_config(link); 649 else 650 i = simple_config(link); 651 652 if (i || info->ndev == 0) 653 goto failed; 654 655 /* 656 * Apply any post-init quirk. FIXME: This should really happen 657 * before we register the port, since it might already be in use. 658 */ 659 if (info->quirk && info->quirk->post) 660 if (info->quirk->post(link)) 661 goto failed; 662 663 return 0; 664 665 failed: 666 dev_warn(&link->dev, "failed to initialize\n"); 667 serial_remove(link); 668 return -ENODEV; 669 } 670 671 static const struct pcmcia_device_id serial_ids[] = { 672 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), 673 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), 674 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), 675 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), 676 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), 677 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), 678 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), 679 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), 680 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), 681 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), 682 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), 683 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), 684 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), 685 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), 686 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 687 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 688 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 689 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 690 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), 691 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), 692 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), 693 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), 694 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), 695 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), 696 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), 697 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), 698 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 699 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), 700 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), 701 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), 702 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 703 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), 704 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), 705 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 706 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 707 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), 708 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), 709 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), 710 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), 711 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), 712 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), 713 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), 714 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), 715 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), 716 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), 717 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), 718 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), 719 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), 720 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), 721 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), 722 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), 723 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), 724 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), 725 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), 726 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), 727 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), 728 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), 729 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ 730 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ 731 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ 732 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), 733 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ 734 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), 735 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), 736 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), 737 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), 738 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), 739 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ 740 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ 741 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ 742 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), 743 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), 744 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), 745 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), 746 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), 747 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ 748 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ 749 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), 750 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), 751 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), 752 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), 753 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), 754 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), 755 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), 756 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), 757 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), 758 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), 759 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), 760 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), 761 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), 762 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), 763 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), 764 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), 765 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), 766 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), 767 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), 768 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), 769 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), 770 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), 771 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), 772 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), 773 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), 774 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), 775 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), 776 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), 777 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), 778 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), 779 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), 780 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), 781 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), 782 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), 783 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), 784 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), 785 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), 786 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), 787 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), 788 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), 789 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ 790 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ 791 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ 792 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ 793 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ 794 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), 795 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), 796 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), 797 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), 798 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), 799 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), 800 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), 801 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), 802 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), 803 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), 804 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), 805 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), 806 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), 807 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), 808 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), 809 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), 810 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), 811 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), 812 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), 813 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), 814 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), 815 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), 816 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), 817 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), 818 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), 819 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), 820 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), 821 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), 822 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), 823 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), 824 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), 825 /* too generic */ 826 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ 827 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ 828 PCMCIA_DEVICE_FUNC_ID(2), 829 PCMCIA_DEVICE_NULL, 830 }; 831 MODULE_DEVICE_TABLE(pcmcia, serial_ids); 832 833 MODULE_FIRMWARE("cis/PCMLM28.cis"); 834 MODULE_FIRMWARE("cis/DP83903.cis"); 835 MODULE_FIRMWARE("cis/3CCFEM556.cis"); 836 MODULE_FIRMWARE("cis/3CXEM556.cis"); 837 MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); 838 MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); 839 MODULE_FIRMWARE("cis/SW_555_SER.cis"); 840 MODULE_FIRMWARE("cis/MT5634ZLX.cis"); 841 MODULE_FIRMWARE("cis/COMpad2.cis"); 842 MODULE_FIRMWARE("cis/COMpad4.cis"); 843 MODULE_FIRMWARE("cis/RS-COM-2P.cis"); 844 845 static struct pcmcia_driver serial_cs_driver = { 846 .owner = THIS_MODULE, 847 .name = "serial_cs", 848 .probe = serial_probe, 849 .remove = serial_detach, 850 .id_table = serial_ids, 851 .suspend = serial_suspend, 852 .resume = serial_resume, 853 }; 854 module_pcmcia_driver(serial_cs_driver); 855 856 MODULE_LICENSE("GPL"); 857