1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Probe module for 8250/16550-type PCI serial ports. 4 * 5 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 6 * 7 * Copyright (C) 2001 Russell King, All Rights Reserved. 8 */ 9 #undef DEBUG 10 #include <linux/module.h> 11 #include <linux/pci.h> 12 #include <linux/string.h> 13 #include <linux/kernel.h> 14 #include <linux/slab.h> 15 #include <linux/delay.h> 16 #include <linux/tty.h> 17 #include <linux/serial_reg.h> 18 #include <linux/serial_core.h> 19 #include <linux/8250_pci.h> 20 #include <linux/bitops.h> 21 22 #include <asm/byteorder.h> 23 #include <asm/io.h> 24 25 #include "8250.h" 26 27 /* 28 * init function returns: 29 * > 0 - number of ports 30 * = 0 - use board->num_ports 31 * < 0 - error 32 */ 33 struct pci_serial_quirk { 34 u32 vendor; 35 u32 device; 36 u32 subvendor; 37 u32 subdevice; 38 int (*probe)(struct pci_dev *dev); 39 int (*init)(struct pci_dev *dev); 40 int (*setup)(struct serial_private *, 41 const struct pciserial_board *, 42 struct uart_8250_port *, int); 43 void (*exit)(struct pci_dev *dev); 44 }; 45 46 #define PCI_NUM_BAR_RESOURCES 6 47 48 struct serial_private { 49 struct pci_dev *dev; 50 unsigned int nr; 51 struct pci_serial_quirk *quirk; 52 const struct pciserial_board *board; 53 int line[0]; 54 }; 55 56 static int pci_default_setup(struct serial_private*, 57 const struct pciserial_board*, struct uart_8250_port *, int); 58 59 static void moan_device(const char *str, struct pci_dev *dev) 60 { 61 dev_err(&dev->dev, 62 "%s: %s\n" 63 "Please send the output of lspci -vv, this\n" 64 "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" 65 "manufacturer and name of serial board or\n" 66 "modem board to <linux-serial@vger.kernel.org>.\n", 67 pci_name(dev), str, dev->vendor, dev->device, 68 dev->subsystem_vendor, dev->subsystem_device); 69 } 70 71 static int 72 setup_port(struct serial_private *priv, struct uart_8250_port *port, 73 int bar, int offset, int regshift) 74 { 75 struct pci_dev *dev = priv->dev; 76 77 if (bar >= PCI_NUM_BAR_RESOURCES) 78 return -EINVAL; 79 80 if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { 81 if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) 82 return -ENOMEM; 83 84 port->port.iotype = UPIO_MEM; 85 port->port.iobase = 0; 86 port->port.mapbase = pci_resource_start(dev, bar) + offset; 87 port->port.membase = pcim_iomap_table(dev)[bar] + offset; 88 port->port.regshift = regshift; 89 } else { 90 port->port.iotype = UPIO_PORT; 91 port->port.iobase = pci_resource_start(dev, bar) + offset; 92 port->port.mapbase = 0; 93 port->port.membase = NULL; 94 port->port.regshift = 0; 95 } 96 return 0; 97 } 98 99 /* 100 * ADDI-DATA GmbH communication cards <info@addi-data.com> 101 */ 102 static int addidata_apci7800_setup(struct serial_private *priv, 103 const struct pciserial_board *board, 104 struct uart_8250_port *port, int idx) 105 { 106 unsigned int bar = 0, offset = board->first_offset; 107 bar = FL_GET_BASE(board->flags); 108 109 if (idx < 2) { 110 offset += idx * board->uart_offset; 111 } else if ((idx >= 2) && (idx < 4)) { 112 bar += 1; 113 offset += ((idx - 2) * board->uart_offset); 114 } else if ((idx >= 4) && (idx < 6)) { 115 bar += 2; 116 offset += ((idx - 4) * board->uart_offset); 117 } else if (idx >= 6) { 118 bar += 3; 119 offset += ((idx - 6) * board->uart_offset); 120 } 121 122 return setup_port(priv, port, bar, offset, board->reg_shift); 123 } 124 125 /* 126 * AFAVLAB uses a different mixture of BARs and offsets 127 * Not that ugly ;) -- HW 128 */ 129 static int 130 afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, 131 struct uart_8250_port *port, int idx) 132 { 133 unsigned int bar, offset = board->first_offset; 134 135 bar = FL_GET_BASE(board->flags); 136 if (idx < 4) 137 bar += idx; 138 else { 139 bar = 4; 140 offset += (idx - 4) * board->uart_offset; 141 } 142 143 return setup_port(priv, port, bar, offset, board->reg_shift); 144 } 145 146 /* 147 * HP's Remote Management Console. The Diva chip came in several 148 * different versions. N-class, L2000 and A500 have two Diva chips, each 149 * with 3 UARTs (the third UART on the second chip is unused). Superdome 150 * and Keystone have one Diva chip with 3 UARTs. Some later machines have 151 * one Diva chip, but it has been expanded to 5 UARTs. 152 */ 153 static int pci_hp_diva_init(struct pci_dev *dev) 154 { 155 int rc = 0; 156 157 switch (dev->subsystem_device) { 158 case PCI_DEVICE_ID_HP_DIVA_TOSCA1: 159 case PCI_DEVICE_ID_HP_DIVA_HALFDOME: 160 case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: 161 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 162 rc = 3; 163 break; 164 case PCI_DEVICE_ID_HP_DIVA_TOSCA2: 165 rc = 2; 166 break; 167 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 168 rc = 4; 169 break; 170 case PCI_DEVICE_ID_HP_DIVA_POWERBAR: 171 case PCI_DEVICE_ID_HP_DIVA_HURRICANE: 172 rc = 1; 173 break; 174 } 175 176 return rc; 177 } 178 179 /* 180 * HP's Diva chip puts the 4th/5th serial port further out, and 181 * some serial ports are supposed to be hidden on certain models. 182 */ 183 static int 184 pci_hp_diva_setup(struct serial_private *priv, 185 const struct pciserial_board *board, 186 struct uart_8250_port *port, int idx) 187 { 188 unsigned int offset = board->first_offset; 189 unsigned int bar = FL_GET_BASE(board->flags); 190 191 switch (priv->dev->subsystem_device) { 192 case PCI_DEVICE_ID_HP_DIVA_MAESTRO: 193 if (idx == 3) 194 idx++; 195 break; 196 case PCI_DEVICE_ID_HP_DIVA_EVEREST: 197 if (idx > 0) 198 idx++; 199 if (idx > 2) 200 idx++; 201 break; 202 } 203 if (idx > 2) 204 offset = 0x18; 205 206 offset += idx * board->uart_offset; 207 208 return setup_port(priv, port, bar, offset, board->reg_shift); 209 } 210 211 /* 212 * Added for EKF Intel i960 serial boards 213 */ 214 static int pci_inteli960ni_init(struct pci_dev *dev) 215 { 216 u32 oldval; 217 218 if (!(dev->subsystem_device & 0x1000)) 219 return -ENODEV; 220 221 /* is firmware started? */ 222 pci_read_config_dword(dev, 0x44, &oldval); 223 if (oldval == 0x00001000L) { /* RESET value */ 224 dev_dbg(&dev->dev, "Local i960 firmware missing\n"); 225 return -ENODEV; 226 } 227 return 0; 228 } 229 230 /* 231 * Some PCI serial cards using the PLX 9050 PCI interface chip require 232 * that the card interrupt be explicitly enabled or disabled. This 233 * seems to be mainly needed on card using the PLX which also use I/O 234 * mapped memory. 235 */ 236 static int pci_plx9050_init(struct pci_dev *dev) 237 { 238 u8 irq_config; 239 void __iomem *p; 240 241 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { 242 moan_device("no memory in bar 0", dev); 243 return 0; 244 } 245 246 irq_config = 0x41; 247 if (dev->vendor == PCI_VENDOR_ID_PANACOM || 248 dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) 249 irq_config = 0x43; 250 251 if ((dev->vendor == PCI_VENDOR_ID_PLX) && 252 (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) 253 /* 254 * As the megawolf cards have the int pins active 255 * high, and have 2 UART chips, both ints must be 256 * enabled on the 9050. Also, the UARTS are set in 257 * 16450 mode by default, so we have to enable the 258 * 16C950 'enhanced' mode so that we can use the 259 * deep FIFOs 260 */ 261 irq_config = 0x5b; 262 /* 263 * enable/disable interrupts 264 */ 265 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 266 if (p == NULL) 267 return -ENOMEM; 268 writel(irq_config, p + 0x4c); 269 270 /* 271 * Read the register back to ensure that it took effect. 272 */ 273 readl(p + 0x4c); 274 iounmap(p); 275 276 return 0; 277 } 278 279 static void pci_plx9050_exit(struct pci_dev *dev) 280 { 281 u8 __iomem *p; 282 283 if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) 284 return; 285 286 /* 287 * disable interrupts 288 */ 289 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 290 if (p != NULL) { 291 writel(0, p + 0x4c); 292 293 /* 294 * Read the register back to ensure that it took effect. 295 */ 296 readl(p + 0x4c); 297 iounmap(p); 298 } 299 } 300 301 #define NI8420_INT_ENABLE_REG 0x38 302 #define NI8420_INT_ENABLE_BIT 0x2000 303 304 static void pci_ni8420_exit(struct pci_dev *dev) 305 { 306 void __iomem *p; 307 unsigned int bar = 0; 308 309 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 310 moan_device("no memory in bar", dev); 311 return; 312 } 313 314 p = pci_ioremap_bar(dev, bar); 315 if (p == NULL) 316 return; 317 318 /* Disable the CPU Interrupt */ 319 writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), 320 p + NI8420_INT_ENABLE_REG); 321 iounmap(p); 322 } 323 324 325 /* MITE registers */ 326 #define MITE_IOWBSR1 0xc4 327 #define MITE_IOWCR1 0xf4 328 #define MITE_LCIMR1 0x08 329 #define MITE_LCIMR2 0x10 330 331 #define MITE_LCIMR2_CLR_CPU_IE (1 << 30) 332 333 static void pci_ni8430_exit(struct pci_dev *dev) 334 { 335 void __iomem *p; 336 unsigned int bar = 0; 337 338 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 339 moan_device("no memory in bar", dev); 340 return; 341 } 342 343 p = pci_ioremap_bar(dev, bar); 344 if (p == NULL) 345 return; 346 347 /* Disable the CPU Interrupt */ 348 writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); 349 iounmap(p); 350 } 351 352 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ 353 static int 354 sbs_setup(struct serial_private *priv, const struct pciserial_board *board, 355 struct uart_8250_port *port, int idx) 356 { 357 unsigned int bar, offset = board->first_offset; 358 359 bar = 0; 360 361 if (idx < 4) { 362 /* first four channels map to 0, 0x100, 0x200, 0x300 */ 363 offset += idx * board->uart_offset; 364 } else if (idx < 8) { 365 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ 366 offset += idx * board->uart_offset + 0xC00; 367 } else /* we have only 8 ports on PMC-OCTALPRO */ 368 return 1; 369 370 return setup_port(priv, port, bar, offset, board->reg_shift); 371 } 372 373 /* 374 * This does initialization for PMC OCTALPRO cards: 375 * maps the device memory, resets the UARTs (needed, bc 376 * if the module is removed and inserted again, the card 377 * is in the sleep mode) and enables global interrupt. 378 */ 379 380 /* global control register offset for SBS PMC-OctalPro */ 381 #define OCT_REG_CR_OFF 0x500 382 383 static int sbs_init(struct pci_dev *dev) 384 { 385 u8 __iomem *p; 386 387 p = pci_ioremap_bar(dev, 0); 388 389 if (p == NULL) 390 return -ENOMEM; 391 /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ 392 writeb(0x10, p + OCT_REG_CR_OFF); 393 udelay(50); 394 writeb(0x0, p + OCT_REG_CR_OFF); 395 396 /* Set bit-2 (INTENABLE) of Control Register */ 397 writeb(0x4, p + OCT_REG_CR_OFF); 398 iounmap(p); 399 400 return 0; 401 } 402 403 /* 404 * Disables the global interrupt of PMC-OctalPro 405 */ 406 407 static void sbs_exit(struct pci_dev *dev) 408 { 409 u8 __iomem *p; 410 411 p = pci_ioremap_bar(dev, 0); 412 /* FIXME: What if resource_len < OCT_REG_CR_OFF */ 413 if (p != NULL) 414 writeb(0, p + OCT_REG_CR_OFF); 415 iounmap(p); 416 } 417 418 /* 419 * SIIG serial cards have an PCI interface chip which also controls 420 * the UART clocking frequency. Each UART can be clocked independently 421 * (except cards equipped with 4 UARTs) and initial clocking settings 422 * are stored in the EEPROM chip. It can cause problems because this 423 * version of serial driver doesn't support differently clocked UART's 424 * on single PCI card. To prevent this, initialization functions set 425 * high frequency clocking for all UART's on given card. It is safe (I 426 * hope) because it doesn't touch EEPROM settings to prevent conflicts 427 * with other OSes (like M$ DOS). 428 * 429 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 430 * 431 * There is two family of SIIG serial cards with different PCI 432 * interface chip and different configuration methods: 433 * - 10x cards have control registers in IO and/or memory space; 434 * - 20x cards have control registers in standard PCI configuration space. 435 * 436 * Note: all 10x cards have PCI device ids 0x10.. 437 * all 20x cards have PCI device ids 0x20.. 438 * 439 * There are also Quartet Serial cards which use Oxford Semiconductor 440 * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. 441 * 442 * Note: some SIIG cards are probed by the parport_serial object. 443 */ 444 445 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) 446 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) 447 448 static int pci_siig10x_init(struct pci_dev *dev) 449 { 450 u16 data; 451 void __iomem *p; 452 453 switch (dev->device & 0xfff8) { 454 case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ 455 data = 0xffdf; 456 break; 457 case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ 458 data = 0xf7ff; 459 break; 460 default: /* 1S1P, 4S */ 461 data = 0xfffb; 462 break; 463 } 464 465 p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); 466 if (p == NULL) 467 return -ENOMEM; 468 469 writew(readw(p + 0x28) & data, p + 0x28); 470 readw(p + 0x28); 471 iounmap(p); 472 return 0; 473 } 474 475 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) 476 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) 477 478 static int pci_siig20x_init(struct pci_dev *dev) 479 { 480 u8 data; 481 482 /* Change clock frequency for the first UART. */ 483 pci_read_config_byte(dev, 0x6f, &data); 484 pci_write_config_byte(dev, 0x6f, data & 0xef); 485 486 /* If this card has 2 UART, we have to do the same with second UART. */ 487 if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || 488 ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { 489 pci_read_config_byte(dev, 0x73, &data); 490 pci_write_config_byte(dev, 0x73, data & 0xef); 491 } 492 return 0; 493 } 494 495 static int pci_siig_init(struct pci_dev *dev) 496 { 497 unsigned int type = dev->device & 0xff00; 498 499 if (type == 0x1000) 500 return pci_siig10x_init(dev); 501 else if (type == 0x2000) 502 return pci_siig20x_init(dev); 503 504 moan_device("Unknown SIIG card", dev); 505 return -ENODEV; 506 } 507 508 static int pci_siig_setup(struct serial_private *priv, 509 const struct pciserial_board *board, 510 struct uart_8250_port *port, int idx) 511 { 512 unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; 513 514 if (idx > 3) { 515 bar = 4; 516 offset = (idx - 4) * 8; 517 } 518 519 return setup_port(priv, port, bar, offset, 0); 520 } 521 522 /* 523 * Timedia has an explosion of boards, and to avoid the PCI table from 524 * growing *huge*, we use this function to collapse some 70 entries 525 * in the PCI table into one, for sanity's and compactness's sake. 526 */ 527 static const unsigned short timedia_single_port[] = { 528 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 529 }; 530 531 static const unsigned short timedia_dual_port[] = { 532 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 533 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 534 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 535 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 536 0xD079, 0 537 }; 538 539 static const unsigned short timedia_quad_port[] = { 540 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 541 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 542 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 543 0xB157, 0 544 }; 545 546 static const unsigned short timedia_eight_port[] = { 547 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 548 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 549 }; 550 551 static const struct timedia_struct { 552 int num; 553 const unsigned short *ids; 554 } timedia_data[] = { 555 { 1, timedia_single_port }, 556 { 2, timedia_dual_port }, 557 { 4, timedia_quad_port }, 558 { 8, timedia_eight_port } 559 }; 560 561 /* 562 * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of 563 * listing them individually, this driver merely grabs them all with 564 * PCI_ANY_ID. Some of these devices, however, also feature a parallel port, 565 * and should be left free to be claimed by parport_serial instead. 566 */ 567 static int pci_timedia_probe(struct pci_dev *dev) 568 { 569 /* 570 * Check the third digit of the subdevice ID 571 * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel) 572 */ 573 if ((dev->subsystem_device & 0x00f0) >= 0x70) { 574 dev_info(&dev->dev, 575 "ignoring Timedia subdevice %04x for parport_serial\n", 576 dev->subsystem_device); 577 return -ENODEV; 578 } 579 580 return 0; 581 } 582 583 static int pci_timedia_init(struct pci_dev *dev) 584 { 585 const unsigned short *ids; 586 int i, j; 587 588 for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { 589 ids = timedia_data[i].ids; 590 for (j = 0; ids[j]; j++) 591 if (dev->subsystem_device == ids[j]) 592 return timedia_data[i].num; 593 } 594 return 0; 595 } 596 597 /* 598 * Timedia/SUNIX uses a mixture of BARs and offsets 599 * Ugh, this is ugly as all hell --- TYT 600 */ 601 static int 602 pci_timedia_setup(struct serial_private *priv, 603 const struct pciserial_board *board, 604 struct uart_8250_port *port, int idx) 605 { 606 unsigned int bar = 0, offset = board->first_offset; 607 608 switch (idx) { 609 case 0: 610 bar = 0; 611 break; 612 case 1: 613 offset = board->uart_offset; 614 bar = 0; 615 break; 616 case 2: 617 bar = 1; 618 break; 619 case 3: 620 offset = board->uart_offset; 621 /* FALLTHROUGH */ 622 case 4: /* BAR 2 */ 623 case 5: /* BAR 3 */ 624 case 6: /* BAR 4 */ 625 case 7: /* BAR 5 */ 626 bar = idx - 2; 627 } 628 629 return setup_port(priv, port, bar, offset, board->reg_shift); 630 } 631 632 /* 633 * Some Titan cards are also a little weird 634 */ 635 static int 636 titan_400l_800l_setup(struct serial_private *priv, 637 const struct pciserial_board *board, 638 struct uart_8250_port *port, int idx) 639 { 640 unsigned int bar, offset = board->first_offset; 641 642 switch (idx) { 643 case 0: 644 bar = 1; 645 break; 646 case 1: 647 bar = 2; 648 break; 649 default: 650 bar = 4; 651 offset = (idx - 2) * board->uart_offset; 652 } 653 654 return setup_port(priv, port, bar, offset, board->reg_shift); 655 } 656 657 static int pci_xircom_init(struct pci_dev *dev) 658 { 659 msleep(100); 660 return 0; 661 } 662 663 static int pci_ni8420_init(struct pci_dev *dev) 664 { 665 void __iomem *p; 666 unsigned int bar = 0; 667 668 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 669 moan_device("no memory in bar", dev); 670 return 0; 671 } 672 673 p = pci_ioremap_bar(dev, bar); 674 if (p == NULL) 675 return -ENOMEM; 676 677 /* Enable CPU Interrupt */ 678 writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, 679 p + NI8420_INT_ENABLE_REG); 680 681 iounmap(p); 682 return 0; 683 } 684 685 #define MITE_IOWBSR1_WSIZE 0xa 686 #define MITE_IOWBSR1_WIN_OFFSET 0x800 687 #define MITE_IOWBSR1_WENAB (1 << 7) 688 #define MITE_LCIMR1_IO_IE_0 (1 << 24) 689 #define MITE_LCIMR2_SET_CPU_IE (1 << 31) 690 #define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe 691 692 static int pci_ni8430_init(struct pci_dev *dev) 693 { 694 void __iomem *p; 695 struct pci_bus_region region; 696 u32 device_window; 697 unsigned int bar = 0; 698 699 if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { 700 moan_device("no memory in bar", dev); 701 return 0; 702 } 703 704 p = pci_ioremap_bar(dev, bar); 705 if (p == NULL) 706 return -ENOMEM; 707 708 /* 709 * Set device window address and size in BAR0, while acknowledging that 710 * the resource structure may contain a translated address that differs 711 * from the address the device responds to. 712 */ 713 pcibios_resource_to_bus(dev->bus, ®ion, &dev->resource[bar]); 714 device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) 715 | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; 716 writel(device_window, p + MITE_IOWBSR1); 717 718 /* Set window access to go to RAMSEL IO address space */ 719 writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), 720 p + MITE_IOWCR1); 721 722 /* Enable IO Bus Interrupt 0 */ 723 writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); 724 725 /* Enable CPU Interrupt */ 726 writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); 727 728 iounmap(p); 729 return 0; 730 } 731 732 /* UART Port Control Register */ 733 #define NI8430_PORTCON 0x0f 734 #define NI8430_PORTCON_TXVR_ENABLE (1 << 3) 735 736 static int 737 pci_ni8430_setup(struct serial_private *priv, 738 const struct pciserial_board *board, 739 struct uart_8250_port *port, int idx) 740 { 741 struct pci_dev *dev = priv->dev; 742 void __iomem *p; 743 unsigned int bar, offset = board->first_offset; 744 745 if (idx >= board->num_ports) 746 return 1; 747 748 bar = FL_GET_BASE(board->flags); 749 offset += idx * board->uart_offset; 750 751 p = pci_ioremap_bar(dev, bar); 752 if (!p) 753 return -ENOMEM; 754 755 /* enable the transceiver */ 756 writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, 757 p + offset + NI8430_PORTCON); 758 759 iounmap(p); 760 761 return setup_port(priv, port, bar, offset, board->reg_shift); 762 } 763 764 static int pci_netmos_9900_setup(struct serial_private *priv, 765 const struct pciserial_board *board, 766 struct uart_8250_port *port, int idx) 767 { 768 unsigned int bar; 769 770 if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && 771 (priv->dev->subsystem_device & 0xff00) == 0x3000) { 772 /* netmos apparently orders BARs by datasheet layout, so serial 773 * ports get BARs 0 and 3 (or 1 and 4 for memmapped) 774 */ 775 bar = 3 * idx; 776 777 return setup_port(priv, port, bar, 0, board->reg_shift); 778 } else { 779 return pci_default_setup(priv, board, port, idx); 780 } 781 } 782 783 /* the 99xx series comes with a range of device IDs and a variety 784 * of capabilities: 785 * 786 * 9900 has varying capabilities and can cascade to sub-controllers 787 * (cascading should be purely internal) 788 * 9904 is hardwired with 4 serial ports 789 * 9912 and 9922 are hardwired with 2 serial ports 790 */ 791 static int pci_netmos_9900_numports(struct pci_dev *dev) 792 { 793 unsigned int c = dev->class; 794 unsigned int pi; 795 unsigned short sub_serports; 796 797 pi = c & 0xff; 798 799 if (pi == 2) 800 return 1; 801 802 if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) { 803 /* two possibilities: 0x30ps encodes number of parallel and 804 * serial ports, or 0x1000 indicates *something*. This is not 805 * immediately obvious, since the 2s1p+4s configuration seems 806 * to offer all functionality on functions 0..2, while still 807 * advertising the same function 3 as the 4s+2s1p config. 808 */ 809 sub_serports = dev->subsystem_device & 0xf; 810 if (sub_serports > 0) 811 return sub_serports; 812 813 dev_err(&dev->dev, 814 "NetMos/Mostech serial driver ignoring port on ambiguous config.\n"); 815 return 0; 816 } 817 818 moan_device("unknown NetMos/Mostech program interface", dev); 819 return 0; 820 } 821 822 static int pci_netmos_init(struct pci_dev *dev) 823 { 824 /* subdevice 0x00PS means <P> parallel, <S> serial */ 825 unsigned int num_serial = dev->subsystem_device & 0xf; 826 827 if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || 828 (dev->device == PCI_DEVICE_ID_NETMOS_9865)) 829 return 0; 830 831 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 832 dev->subsystem_device == 0x0299) 833 return 0; 834 835 switch (dev->device) { /* FALLTHROUGH on all */ 836 case PCI_DEVICE_ID_NETMOS_9904: 837 case PCI_DEVICE_ID_NETMOS_9912: 838 case PCI_DEVICE_ID_NETMOS_9922: 839 case PCI_DEVICE_ID_NETMOS_9900: 840 num_serial = pci_netmos_9900_numports(dev); 841 break; 842 843 default: 844 break; 845 } 846 847 if (num_serial == 0) { 848 moan_device("unknown NetMos/Mostech device", dev); 849 return -ENODEV; 850 } 851 852 return num_serial; 853 } 854 855 /* 856 * These chips are available with optionally one parallel port and up to 857 * two serial ports. Unfortunately they all have the same product id. 858 * 859 * Basic configuration is done over a region of 32 I/O ports. The base 860 * ioport is called INTA or INTC, depending on docs/other drivers. 861 * 862 * The region of the 32 I/O ports is configured in POSIO0R... 863 */ 864 865 /* registers */ 866 #define ITE_887x_MISCR 0x9c 867 #define ITE_887x_INTCBAR 0x78 868 #define ITE_887x_UARTBAR 0x7c 869 #define ITE_887x_PS0BAR 0x10 870 #define ITE_887x_POSIO0 0x60 871 872 /* I/O space size */ 873 #define ITE_887x_IOSIZE 32 874 /* I/O space size (bits 26-24; 8 bytes = 011b) */ 875 #define ITE_887x_POSIO_IOSIZE_8 (3 << 24) 876 /* I/O space size (bits 26-24; 32 bytes = 101b) */ 877 #define ITE_887x_POSIO_IOSIZE_32 (5 << 24) 878 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ 879 #define ITE_887x_POSIO_SPEED (3 << 29) 880 /* enable IO_Space bit */ 881 #define ITE_887x_POSIO_ENABLE (1 << 31) 882 883 static int pci_ite887x_init(struct pci_dev *dev) 884 { 885 /* inta_addr are the configuration addresses of the ITE */ 886 static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, 887 0x200, 0x280, 0 }; 888 int ret, i, type; 889 struct resource *iobase = NULL; 890 u32 miscr, uartbar, ioport; 891 892 /* search for the base-ioport */ 893 i = 0; 894 while (inta_addr[i] && iobase == NULL) { 895 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, 896 "ite887x"); 897 if (iobase != NULL) { 898 /* write POSIO0R - speed | size | ioport */ 899 pci_write_config_dword(dev, ITE_887x_POSIO0, 900 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 901 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); 902 /* write INTCBAR - ioport */ 903 pci_write_config_dword(dev, ITE_887x_INTCBAR, 904 inta_addr[i]); 905 ret = inb(inta_addr[i]); 906 if (ret != 0xff) { 907 /* ioport connected */ 908 break; 909 } 910 release_region(iobase->start, ITE_887x_IOSIZE); 911 iobase = NULL; 912 } 913 i++; 914 } 915 916 if (!inta_addr[i]) { 917 dev_err(&dev->dev, "ite887x: could not find iobase\n"); 918 return -ENODEV; 919 } 920 921 /* start of undocumented type checking (see parport_pc.c) */ 922 type = inb(iobase->start + 0x18) & 0x0f; 923 924 switch (type) { 925 case 0x2: /* ITE8871 (1P) */ 926 case 0xa: /* ITE8875 (1P) */ 927 ret = 0; 928 break; 929 case 0xe: /* ITE8872 (2S1P) */ 930 ret = 2; 931 break; 932 case 0x6: /* ITE8873 (1S) */ 933 ret = 1; 934 break; 935 case 0x8: /* ITE8874 (2S) */ 936 ret = 2; 937 break; 938 default: 939 moan_device("Unknown ITE887x", dev); 940 ret = -ENODEV; 941 } 942 943 /* configure all serial ports */ 944 for (i = 0; i < ret; i++) { 945 /* read the I/O port from the device */ 946 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), 947 &ioport); 948 ioport &= 0x0000FF00; /* the actual base address */ 949 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), 950 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | 951 ITE_887x_POSIO_IOSIZE_8 | ioport); 952 953 /* write the ioport to the UARTBAR */ 954 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); 955 uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ 956 uartbar |= (ioport << (16 * i)); /* set the ioport */ 957 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); 958 959 /* get current config */ 960 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); 961 /* disable interrupts (UARTx_Routing[3:0]) */ 962 miscr &= ~(0xf << (12 - 4 * i)); 963 /* activate the UART (UARTx_En) */ 964 miscr |= 1 << (23 - i); 965 /* write new config with activated UART */ 966 pci_write_config_dword(dev, ITE_887x_MISCR, miscr); 967 } 968 969 if (ret <= 0) { 970 /* the device has no UARTs if we get here */ 971 release_region(iobase->start, ITE_887x_IOSIZE); 972 } 973 974 return ret; 975 } 976 977 static void pci_ite887x_exit(struct pci_dev *dev) 978 { 979 u32 ioport; 980 /* the ioport is bit 0-15 in POSIO0R */ 981 pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); 982 ioport &= 0xffff; 983 release_region(ioport, ITE_887x_IOSIZE); 984 } 985 986 /* 987 * EndRun Technologies. 988 * Determine the number of ports available on the device. 989 */ 990 #define PCI_VENDOR_ID_ENDRUN 0x7401 991 #define PCI_DEVICE_ID_ENDRUN_1588 0xe100 992 993 static int pci_endrun_init(struct pci_dev *dev) 994 { 995 u8 __iomem *p; 996 unsigned long deviceID; 997 unsigned int number_uarts = 0; 998 999 /* EndRun device is all 0xexxx */ 1000 if (dev->vendor == PCI_VENDOR_ID_ENDRUN && 1001 (dev->device & 0xf000) != 0xe000) 1002 return 0; 1003 1004 p = pci_iomap(dev, 0, 5); 1005 if (p == NULL) 1006 return -ENOMEM; 1007 1008 deviceID = ioread32(p); 1009 /* EndRun device */ 1010 if (deviceID == 0x07000200) { 1011 number_uarts = ioread8(p + 4); 1012 dev_dbg(&dev->dev, 1013 "%d ports detected on EndRun PCI Express device\n", 1014 number_uarts); 1015 } 1016 pci_iounmap(dev, p); 1017 return number_uarts; 1018 } 1019 1020 /* 1021 * Oxford Semiconductor Inc. 1022 * Check that device is part of the Tornado range of devices, then determine 1023 * the number of ports available on the device. 1024 */ 1025 static int pci_oxsemi_tornado_init(struct pci_dev *dev) 1026 { 1027 u8 __iomem *p; 1028 unsigned long deviceID; 1029 unsigned int number_uarts = 0; 1030 1031 /* OxSemi Tornado devices are all 0xCxxx */ 1032 if (dev->vendor == PCI_VENDOR_ID_OXSEMI && 1033 (dev->device & 0xF000) != 0xC000) 1034 return 0; 1035 1036 p = pci_iomap(dev, 0, 5); 1037 if (p == NULL) 1038 return -ENOMEM; 1039 1040 deviceID = ioread32(p); 1041 /* Tornado device */ 1042 if (deviceID == 0x07000200) { 1043 number_uarts = ioread8(p + 4); 1044 dev_dbg(&dev->dev, 1045 "%d ports detected on Oxford PCI Express device\n", 1046 number_uarts); 1047 } 1048 pci_iounmap(dev, p); 1049 return number_uarts; 1050 } 1051 1052 static int pci_asix_setup(struct serial_private *priv, 1053 const struct pciserial_board *board, 1054 struct uart_8250_port *port, int idx) 1055 { 1056 port->bugs |= UART_BUG_PARITY; 1057 return pci_default_setup(priv, board, port, idx); 1058 } 1059 1060 /* Quatech devices have their own extra interface features */ 1061 1062 struct quatech_feature { 1063 u16 devid; 1064 bool amcc; 1065 }; 1066 1067 #define QPCR_TEST_FOR1 0x3F 1068 #define QPCR_TEST_GET1 0x00 1069 #define QPCR_TEST_FOR2 0x40 1070 #define QPCR_TEST_GET2 0x40 1071 #define QPCR_TEST_FOR3 0x80 1072 #define QPCR_TEST_GET3 0x40 1073 #define QPCR_TEST_FOR4 0xC0 1074 #define QPCR_TEST_GET4 0x80 1075 1076 #define QOPR_CLOCK_X1 0x0000 1077 #define QOPR_CLOCK_X2 0x0001 1078 #define QOPR_CLOCK_X4 0x0002 1079 #define QOPR_CLOCK_X8 0x0003 1080 #define QOPR_CLOCK_RATE_MASK 0x0003 1081 1082 1083 static struct quatech_feature quatech_cards[] = { 1084 { PCI_DEVICE_ID_QUATECH_QSC100, 1 }, 1085 { PCI_DEVICE_ID_QUATECH_DSC100, 1 }, 1086 { PCI_DEVICE_ID_QUATECH_DSC100E, 0 }, 1087 { PCI_DEVICE_ID_QUATECH_DSC200, 1 }, 1088 { PCI_DEVICE_ID_QUATECH_DSC200E, 0 }, 1089 { PCI_DEVICE_ID_QUATECH_ESC100D, 1 }, 1090 { PCI_DEVICE_ID_QUATECH_ESC100M, 1 }, 1091 { PCI_DEVICE_ID_QUATECH_QSCP100, 1 }, 1092 { PCI_DEVICE_ID_QUATECH_DSCP100, 1 }, 1093 { PCI_DEVICE_ID_QUATECH_QSCP200, 1 }, 1094 { PCI_DEVICE_ID_QUATECH_DSCP200, 1 }, 1095 { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 }, 1096 { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 }, 1097 { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 }, 1098 { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 }, 1099 { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 }, 1100 { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 }, 1101 { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 }, 1102 { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 }, 1103 { 0, } 1104 }; 1105 1106 static int pci_quatech_amcc(u16 devid) 1107 { 1108 struct quatech_feature *qf = &quatech_cards[0]; 1109 while (qf->devid) { 1110 if (qf->devid == devid) 1111 return qf->amcc; 1112 qf++; 1113 } 1114 pr_err("quatech: unknown port type '0x%04X'.\n", devid); 1115 return 0; 1116 }; 1117 1118 static int pci_quatech_rqopr(struct uart_8250_port *port) 1119 { 1120 unsigned long base = port->port.iobase; 1121 u8 LCR, val; 1122 1123 LCR = inb(base + UART_LCR); 1124 outb(0xBF, base + UART_LCR); 1125 val = inb(base + UART_SCR); 1126 outb(LCR, base + UART_LCR); 1127 return val; 1128 } 1129 1130 static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) 1131 { 1132 unsigned long base = port->port.iobase; 1133 u8 LCR; 1134 1135 LCR = inb(base + UART_LCR); 1136 outb(0xBF, base + UART_LCR); 1137 inb(base + UART_SCR); 1138 outb(qopr, base + UART_SCR); 1139 outb(LCR, base + UART_LCR); 1140 } 1141 1142 static int pci_quatech_rqmcr(struct uart_8250_port *port) 1143 { 1144 unsigned long base = port->port.iobase; 1145 u8 LCR, val, qmcr; 1146 1147 LCR = inb(base + UART_LCR); 1148 outb(0xBF, base + UART_LCR); 1149 val = inb(base + UART_SCR); 1150 outb(val | 0x10, base + UART_SCR); 1151 qmcr = inb(base + UART_MCR); 1152 outb(val, base + UART_SCR); 1153 outb(LCR, base + UART_LCR); 1154 1155 return qmcr; 1156 } 1157 1158 static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr) 1159 { 1160 unsigned long base = port->port.iobase; 1161 u8 LCR, val; 1162 1163 LCR = inb(base + UART_LCR); 1164 outb(0xBF, base + UART_LCR); 1165 val = inb(base + UART_SCR); 1166 outb(val | 0x10, base + UART_SCR); 1167 outb(qmcr, base + UART_MCR); 1168 outb(val, base + UART_SCR); 1169 outb(LCR, base + UART_LCR); 1170 } 1171 1172 static int pci_quatech_has_qmcr(struct uart_8250_port *port) 1173 { 1174 unsigned long base = port->port.iobase; 1175 u8 LCR, val; 1176 1177 LCR = inb(base + UART_LCR); 1178 outb(0xBF, base + UART_LCR); 1179 val = inb(base + UART_SCR); 1180 if (val & 0x20) { 1181 outb(0x80, UART_LCR); 1182 if (!(inb(UART_SCR) & 0x20)) { 1183 outb(LCR, base + UART_LCR); 1184 return 1; 1185 } 1186 } 1187 return 0; 1188 } 1189 1190 static int pci_quatech_test(struct uart_8250_port *port) 1191 { 1192 u8 reg, qopr; 1193 1194 qopr = pci_quatech_rqopr(port); 1195 pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1); 1196 reg = pci_quatech_rqopr(port) & 0xC0; 1197 if (reg != QPCR_TEST_GET1) 1198 return -EINVAL; 1199 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2); 1200 reg = pci_quatech_rqopr(port) & 0xC0; 1201 if (reg != QPCR_TEST_GET2) 1202 return -EINVAL; 1203 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3); 1204 reg = pci_quatech_rqopr(port) & 0xC0; 1205 if (reg != QPCR_TEST_GET3) 1206 return -EINVAL; 1207 pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4); 1208 reg = pci_quatech_rqopr(port) & 0xC0; 1209 if (reg != QPCR_TEST_GET4) 1210 return -EINVAL; 1211 1212 pci_quatech_wqopr(port, qopr); 1213 return 0; 1214 } 1215 1216 static int pci_quatech_clock(struct uart_8250_port *port) 1217 { 1218 u8 qopr, reg, set; 1219 unsigned long clock; 1220 1221 if (pci_quatech_test(port) < 0) 1222 return 1843200; 1223 1224 qopr = pci_quatech_rqopr(port); 1225 1226 pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8); 1227 reg = pci_quatech_rqopr(port); 1228 if (reg & QOPR_CLOCK_X8) { 1229 clock = 1843200; 1230 goto out; 1231 } 1232 pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8); 1233 reg = pci_quatech_rqopr(port); 1234 if (!(reg & QOPR_CLOCK_X8)) { 1235 clock = 1843200; 1236 goto out; 1237 } 1238 reg &= QOPR_CLOCK_X8; 1239 if (reg == QOPR_CLOCK_X2) { 1240 clock = 3685400; 1241 set = QOPR_CLOCK_X2; 1242 } else if (reg == QOPR_CLOCK_X4) { 1243 clock = 7372800; 1244 set = QOPR_CLOCK_X4; 1245 } else if (reg == QOPR_CLOCK_X8) { 1246 clock = 14745600; 1247 set = QOPR_CLOCK_X8; 1248 } else { 1249 clock = 1843200; 1250 set = QOPR_CLOCK_X1; 1251 } 1252 qopr &= ~QOPR_CLOCK_RATE_MASK; 1253 qopr |= set; 1254 1255 out: 1256 pci_quatech_wqopr(port, qopr); 1257 return clock; 1258 } 1259 1260 static int pci_quatech_rs422(struct uart_8250_port *port) 1261 { 1262 u8 qmcr; 1263 int rs422 = 0; 1264 1265 if (!pci_quatech_has_qmcr(port)) 1266 return 0; 1267 qmcr = pci_quatech_rqmcr(port); 1268 pci_quatech_wqmcr(port, 0xFF); 1269 if (pci_quatech_rqmcr(port)) 1270 rs422 = 1; 1271 pci_quatech_wqmcr(port, qmcr); 1272 return rs422; 1273 } 1274 1275 static int pci_quatech_init(struct pci_dev *dev) 1276 { 1277 if (pci_quatech_amcc(dev->device)) { 1278 unsigned long base = pci_resource_start(dev, 0); 1279 if (base) { 1280 u32 tmp; 1281 1282 outl(inl(base + 0x38) | 0x00002000, base + 0x38); 1283 tmp = inl(base + 0x3c); 1284 outl(tmp | 0x01000000, base + 0x3c); 1285 outl(tmp &= ~0x01000000, base + 0x3c); 1286 } 1287 } 1288 return 0; 1289 } 1290 1291 static int pci_quatech_setup(struct serial_private *priv, 1292 const struct pciserial_board *board, 1293 struct uart_8250_port *port, int idx) 1294 { 1295 /* Needed by pci_quatech calls below */ 1296 port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); 1297 /* Set up the clocking */ 1298 port->port.uartclk = pci_quatech_clock(port); 1299 /* For now just warn about RS422 */ 1300 if (pci_quatech_rs422(port)) 1301 pr_warn("quatech: software control of RS422 features not currently supported.\n"); 1302 return pci_default_setup(priv, board, port, idx); 1303 } 1304 1305 static void pci_quatech_exit(struct pci_dev *dev) 1306 { 1307 } 1308 1309 static int pci_default_setup(struct serial_private *priv, 1310 const struct pciserial_board *board, 1311 struct uart_8250_port *port, int idx) 1312 { 1313 unsigned int bar, offset = board->first_offset, maxnr; 1314 1315 bar = FL_GET_BASE(board->flags); 1316 if (board->flags & FL_BASE_BARS) 1317 bar += idx; 1318 else 1319 offset += idx * board->uart_offset; 1320 1321 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> 1322 (board->reg_shift + 3); 1323 1324 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) 1325 return 1; 1326 1327 return setup_port(priv, port, bar, offset, board->reg_shift); 1328 } 1329 1330 static int pci_pericom_setup(struct serial_private *priv, 1331 const struct pciserial_board *board, 1332 struct uart_8250_port *port, int idx) 1333 { 1334 unsigned int bar, offset = board->first_offset, maxnr; 1335 1336 bar = FL_GET_BASE(board->flags); 1337 if (board->flags & FL_BASE_BARS) 1338 bar += idx; 1339 else 1340 offset += idx * board->uart_offset; 1341 1342 if (idx==3) 1343 offset = 0x38; 1344 1345 maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> 1346 (board->reg_shift + 3); 1347 1348 if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) 1349 return 1; 1350 1351 return setup_port(priv, port, bar, offset, board->reg_shift); 1352 } 1353 1354 static int 1355 ce4100_serial_setup(struct serial_private *priv, 1356 const struct pciserial_board *board, 1357 struct uart_8250_port *port, int idx) 1358 { 1359 int ret; 1360 1361 ret = setup_port(priv, port, idx, 0, board->reg_shift); 1362 port->port.iotype = UPIO_MEM32; 1363 port->port.type = PORT_XSCALE; 1364 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1365 port->port.regshift = 2; 1366 1367 return ret; 1368 } 1369 1370 static int 1371 pci_omegapci_setup(struct serial_private *priv, 1372 const struct pciserial_board *board, 1373 struct uart_8250_port *port, int idx) 1374 { 1375 return setup_port(priv, port, 2, idx * 8, 0); 1376 } 1377 1378 static int 1379 pci_brcm_trumanage_setup(struct serial_private *priv, 1380 const struct pciserial_board *board, 1381 struct uart_8250_port *port, int idx) 1382 { 1383 int ret = pci_default_setup(priv, board, port, idx); 1384 1385 port->port.type = PORT_BRCM_TRUMANAGE; 1386 port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); 1387 return ret; 1388 } 1389 1390 /* RTS will control by MCR if this bit is 0 */ 1391 #define FINTEK_RTS_CONTROL_BY_HW BIT(4) 1392 /* only worked with FINTEK_RTS_CONTROL_BY_HW on */ 1393 #define FINTEK_RTS_INVERT BIT(5) 1394 1395 /* We should do proper H/W transceiver setting before change to RS485 mode */ 1396 static int pci_fintek_rs485_config(struct uart_port *port, 1397 struct serial_rs485 *rs485) 1398 { 1399 struct pci_dev *pci_dev = to_pci_dev(port->dev); 1400 u8 setting; 1401 u8 *index = (u8 *) port->private_data; 1402 1403 pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting); 1404 1405 if (!rs485) 1406 rs485 = &port->rs485; 1407 else if (rs485->flags & SER_RS485_ENABLED) 1408 memset(rs485->padding, 0, sizeof(rs485->padding)); 1409 else 1410 memset(rs485, 0, sizeof(*rs485)); 1411 1412 /* F81504/508/512 not support RTS delay before or after send */ 1413 rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND; 1414 1415 if (rs485->flags & SER_RS485_ENABLED) { 1416 /* Enable RTS H/W control mode */ 1417 setting |= FINTEK_RTS_CONTROL_BY_HW; 1418 1419 if (rs485->flags & SER_RS485_RTS_ON_SEND) { 1420 /* RTS driving high on TX */ 1421 setting &= ~FINTEK_RTS_INVERT; 1422 } else { 1423 /* RTS driving low on TX */ 1424 setting |= FINTEK_RTS_INVERT; 1425 } 1426 1427 rs485->delay_rts_after_send = 0; 1428 rs485->delay_rts_before_send = 0; 1429 } else { 1430 /* Disable RTS H/W control mode */ 1431 setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT); 1432 } 1433 1434 pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting); 1435 1436 if (rs485 != &port->rs485) 1437 port->rs485 = *rs485; 1438 1439 return 0; 1440 } 1441 1442 static int pci_fintek_setup(struct serial_private *priv, 1443 const struct pciserial_board *board, 1444 struct uart_8250_port *port, int idx) 1445 { 1446 struct pci_dev *pdev = priv->dev; 1447 u8 *data; 1448 u8 config_base; 1449 u16 iobase; 1450 1451 config_base = 0x40 + 0x08 * idx; 1452 1453 /* Get the io address from configuration space */ 1454 pci_read_config_word(pdev, config_base + 4, &iobase); 1455 1456 dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%x", __func__, idx, iobase); 1457 1458 port->port.iotype = UPIO_PORT; 1459 port->port.iobase = iobase; 1460 port->port.rs485_config = pci_fintek_rs485_config; 1461 1462 data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL); 1463 if (!data) 1464 return -ENOMEM; 1465 1466 /* preserve index in PCI configuration space */ 1467 *data = idx; 1468 port->port.private_data = data; 1469 1470 return 0; 1471 } 1472 1473 static int pci_fintek_init(struct pci_dev *dev) 1474 { 1475 unsigned long iobase; 1476 u32 max_port, i; 1477 resource_size_t bar_data[3]; 1478 u8 config_base; 1479 struct serial_private *priv = pci_get_drvdata(dev); 1480 struct uart_8250_port *port; 1481 1482 if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || 1483 !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || 1484 !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) 1485 return -ENODEV; 1486 1487 switch (dev->device) { 1488 case 0x1104: /* 4 ports */ 1489 case 0x1108: /* 8 ports */ 1490 max_port = dev->device & 0xff; 1491 break; 1492 case 0x1112: /* 12 ports */ 1493 max_port = 12; 1494 break; 1495 default: 1496 return -EINVAL; 1497 } 1498 1499 /* Get the io address dispatch from the BIOS */ 1500 bar_data[0] = pci_resource_start(dev, 5); 1501 bar_data[1] = pci_resource_start(dev, 4); 1502 bar_data[2] = pci_resource_start(dev, 3); 1503 1504 for (i = 0; i < max_port; ++i) { 1505 /* UART0 configuration offset start from 0x40 */ 1506 config_base = 0x40 + 0x08 * i; 1507 1508 /* Calculate Real IO Port */ 1509 iobase = (bar_data[i / 4] & 0xffffffe0) + (i % 4) * 8; 1510 1511 /* Enable UART I/O port */ 1512 pci_write_config_byte(dev, config_base + 0x00, 0x01); 1513 1514 /* Select 128-byte FIFO and 8x FIFO threshold */ 1515 pci_write_config_byte(dev, config_base + 0x01, 0x33); 1516 1517 /* LSB UART */ 1518 pci_write_config_byte(dev, config_base + 0x04, 1519 (u8)(iobase & 0xff)); 1520 1521 /* MSB UART */ 1522 pci_write_config_byte(dev, config_base + 0x05, 1523 (u8)((iobase & 0xff00) >> 8)); 1524 1525 pci_write_config_byte(dev, config_base + 0x06, dev->irq); 1526 1527 if (priv) { 1528 /* re-apply RS232/485 mode when 1529 * pciserial_resume_ports() 1530 */ 1531 port = serial8250_get_port(priv->line[i]); 1532 pci_fintek_rs485_config(&port->port, NULL); 1533 } else { 1534 /* First init without port data 1535 * force init to RS232 Mode 1536 */ 1537 pci_write_config_byte(dev, config_base + 0x07, 0x01); 1538 } 1539 } 1540 1541 return max_port; 1542 } 1543 1544 static int skip_tx_en_setup(struct serial_private *priv, 1545 const struct pciserial_board *board, 1546 struct uart_8250_port *port, int idx) 1547 { 1548 port->port.quirks |= UPQ_NO_TXEN_TEST; 1549 dev_dbg(&priv->dev->dev, 1550 "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n", 1551 priv->dev->vendor, priv->dev->device, 1552 priv->dev->subsystem_vendor, priv->dev->subsystem_device); 1553 1554 return pci_default_setup(priv, board, port, idx); 1555 } 1556 1557 static void kt_handle_break(struct uart_port *p) 1558 { 1559 struct uart_8250_port *up = up_to_u8250p(p); 1560 /* 1561 * On receipt of a BI, serial device in Intel ME (Intel 1562 * management engine) needs to have its fifos cleared for sane 1563 * SOL (Serial Over Lan) output. 1564 */ 1565 serial8250_clear_and_reinit_fifos(up); 1566 } 1567 1568 static unsigned int kt_serial_in(struct uart_port *p, int offset) 1569 { 1570 struct uart_8250_port *up = up_to_u8250p(p); 1571 unsigned int val; 1572 1573 /* 1574 * When the Intel ME (management engine) gets reset its serial 1575 * port registers could return 0 momentarily. Functions like 1576 * serial8250_console_write, read and save the IER, perform 1577 * some operation and then restore it. In order to avoid 1578 * setting IER register inadvertently to 0, if the value read 1579 * is 0, double check with ier value in uart_8250_port and use 1580 * that instead. up->ier should be the same value as what is 1581 * currently configured. 1582 */ 1583 val = inb(p->iobase + offset); 1584 if (offset == UART_IER) { 1585 if (val == 0) 1586 val = up->ier; 1587 } 1588 return val; 1589 } 1590 1591 static int kt_serial_setup(struct serial_private *priv, 1592 const struct pciserial_board *board, 1593 struct uart_8250_port *port, int idx) 1594 { 1595 port->port.flags |= UPF_BUG_THRE; 1596 port->port.serial_in = kt_serial_in; 1597 port->port.handle_break = kt_handle_break; 1598 return skip_tx_en_setup(priv, board, port, idx); 1599 } 1600 1601 static int pci_eg20t_init(struct pci_dev *dev) 1602 { 1603 #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) 1604 return -ENODEV; 1605 #else 1606 return 0; 1607 #endif 1608 } 1609 1610 static int 1611 pci_wch_ch353_setup(struct serial_private *priv, 1612 const struct pciserial_board *board, 1613 struct uart_8250_port *port, int idx) 1614 { 1615 port->port.flags |= UPF_FIXED_TYPE; 1616 port->port.type = PORT_16550A; 1617 return pci_default_setup(priv, board, port, idx); 1618 } 1619 1620 static int 1621 pci_wch_ch355_setup(struct serial_private *priv, 1622 const struct pciserial_board *board, 1623 struct uart_8250_port *port, int idx) 1624 { 1625 port->port.flags |= UPF_FIXED_TYPE; 1626 port->port.type = PORT_16550A; 1627 return pci_default_setup(priv, board, port, idx); 1628 } 1629 1630 static int 1631 pci_wch_ch38x_setup(struct serial_private *priv, 1632 const struct pciserial_board *board, 1633 struct uart_8250_port *port, int idx) 1634 { 1635 port->port.flags |= UPF_FIXED_TYPE; 1636 port->port.type = PORT_16850; 1637 return pci_default_setup(priv, board, port, idx); 1638 } 1639 1640 #define PCI_VENDOR_ID_SBSMODULARIO 0x124B 1641 #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B 1642 #define PCI_DEVICE_ID_OCTPRO 0x0001 1643 #define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 1644 #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 1645 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 1646 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 1647 #define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500 1648 #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 1649 #define PCI_VENDOR_ID_ADVANTECH 0x13fe 1650 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 1651 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 1652 #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 1653 #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 1654 #define PCI_DEVICE_ID_TITAN_200I 0x8028 1655 #define PCI_DEVICE_ID_TITAN_400I 0x8048 1656 #define PCI_DEVICE_ID_TITAN_800I 0x8088 1657 #define PCI_DEVICE_ID_TITAN_800EH 0xA007 1658 #define PCI_DEVICE_ID_TITAN_800EHB 0xA008 1659 #define PCI_DEVICE_ID_TITAN_400EH 0xA009 1660 #define PCI_DEVICE_ID_TITAN_100E 0xA010 1661 #define PCI_DEVICE_ID_TITAN_200E 0xA012 1662 #define PCI_DEVICE_ID_TITAN_400E 0xA013 1663 #define PCI_DEVICE_ID_TITAN_800E 0xA014 1664 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 1665 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 1666 #define PCI_DEVICE_ID_TITAN_200V3 0xA306 1667 #define PCI_DEVICE_ID_TITAN_400V3 0xA310 1668 #define PCI_DEVICE_ID_TITAN_410V3 0xA312 1669 #define PCI_DEVICE_ID_TITAN_800V3 0xA314 1670 #define PCI_DEVICE_ID_TITAN_800V3B 0xA315 1671 #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 1672 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 1673 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 1674 #define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d 1675 #define PCI_VENDOR_ID_WCH 0x4348 1676 #define PCI_DEVICE_ID_WCH_CH352_2S 0x3253 1677 #define PCI_DEVICE_ID_WCH_CH353_4S 0x3453 1678 #define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046 1679 #define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053 1680 #define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053 1681 #define PCI_DEVICE_ID_WCH_CH355_4S 0x7173 1682 #define PCI_VENDOR_ID_AGESTAR 0x5372 1683 #define PCI_DEVICE_ID_AGESTAR_9375 0x6872 1684 #define PCI_VENDOR_ID_ASIX 0x9710 1685 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a 1686 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e 1687 1688 #define PCI_VENDOR_ID_SUNIX 0x1fd4 1689 #define PCI_DEVICE_ID_SUNIX_1999 0x1999 1690 1691 #define PCIE_VENDOR_ID_WCH 0x1c00 1692 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 1693 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 1694 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 1695 1696 #define PCI_VENDOR_ID_PERICOM 0x12D8 1697 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 1698 #define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952 1699 #define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 1700 #define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 1701 1702 #define PCI_VENDOR_ID_ACCESIO 0x494f 1703 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 1704 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 1705 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C 1706 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E 1707 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091 1708 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093 1709 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099 1710 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B 1711 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1 1712 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3 1713 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA 1714 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC 1715 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108 1716 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110 1717 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111 1718 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118 1719 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119 1720 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152 1721 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A 1722 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190 1723 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191 1724 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198 1725 #define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199 1726 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0 1727 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A 1728 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B 1729 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A 1730 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B 1731 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098 1732 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9 1733 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9 1734 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9 1735 #define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8 1736 1737 1738 1739 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ 1740 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 1741 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 1742 1743 /* 1744 * Master list of serial port init/setup/exit quirks. 1745 * This does not describe the general nature of the port. 1746 * (ie, baud base, number and location of ports, etc) 1747 * 1748 * This list is ordered alphabetically by vendor then device. 1749 * Specific entries must come before more generic entries. 1750 */ 1751 static struct pci_serial_quirk pci_serial_quirks[] __refdata = { 1752 /* 1753 * ADDI-DATA GmbH communication cards <info@addi-data.com> 1754 */ 1755 { 1756 .vendor = PCI_VENDOR_ID_AMCC, 1757 .device = PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 1758 .subvendor = PCI_ANY_ID, 1759 .subdevice = PCI_ANY_ID, 1760 .setup = addidata_apci7800_setup, 1761 }, 1762 /* 1763 * AFAVLAB cards - these may be called via parport_serial 1764 * It is not clear whether this applies to all products. 1765 */ 1766 { 1767 .vendor = PCI_VENDOR_ID_AFAVLAB, 1768 .device = PCI_ANY_ID, 1769 .subvendor = PCI_ANY_ID, 1770 .subdevice = PCI_ANY_ID, 1771 .setup = afavlab_setup, 1772 }, 1773 /* 1774 * HP Diva 1775 */ 1776 { 1777 .vendor = PCI_VENDOR_ID_HP, 1778 .device = PCI_DEVICE_ID_HP_DIVA, 1779 .subvendor = PCI_ANY_ID, 1780 .subdevice = PCI_ANY_ID, 1781 .init = pci_hp_diva_init, 1782 .setup = pci_hp_diva_setup, 1783 }, 1784 /* 1785 * Intel 1786 */ 1787 { 1788 .vendor = PCI_VENDOR_ID_INTEL, 1789 .device = PCI_DEVICE_ID_INTEL_80960_RP, 1790 .subvendor = 0xe4bf, 1791 .subdevice = PCI_ANY_ID, 1792 .init = pci_inteli960ni_init, 1793 .setup = pci_default_setup, 1794 }, 1795 { 1796 .vendor = PCI_VENDOR_ID_INTEL, 1797 .device = PCI_DEVICE_ID_INTEL_8257X_SOL, 1798 .subvendor = PCI_ANY_ID, 1799 .subdevice = PCI_ANY_ID, 1800 .setup = skip_tx_en_setup, 1801 }, 1802 { 1803 .vendor = PCI_VENDOR_ID_INTEL, 1804 .device = PCI_DEVICE_ID_INTEL_82573L_SOL, 1805 .subvendor = PCI_ANY_ID, 1806 .subdevice = PCI_ANY_ID, 1807 .setup = skip_tx_en_setup, 1808 }, 1809 { 1810 .vendor = PCI_VENDOR_ID_INTEL, 1811 .device = PCI_DEVICE_ID_INTEL_82573E_SOL, 1812 .subvendor = PCI_ANY_ID, 1813 .subdevice = PCI_ANY_ID, 1814 .setup = skip_tx_en_setup, 1815 }, 1816 { 1817 .vendor = PCI_VENDOR_ID_INTEL, 1818 .device = PCI_DEVICE_ID_INTEL_CE4100_UART, 1819 .subvendor = PCI_ANY_ID, 1820 .subdevice = PCI_ANY_ID, 1821 .setup = ce4100_serial_setup, 1822 }, 1823 { 1824 .vendor = PCI_VENDOR_ID_INTEL, 1825 .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, 1826 .subvendor = PCI_ANY_ID, 1827 .subdevice = PCI_ANY_ID, 1828 .setup = kt_serial_setup, 1829 }, 1830 /* 1831 * ITE 1832 */ 1833 { 1834 .vendor = PCI_VENDOR_ID_ITE, 1835 .device = PCI_DEVICE_ID_ITE_8872, 1836 .subvendor = PCI_ANY_ID, 1837 .subdevice = PCI_ANY_ID, 1838 .init = pci_ite887x_init, 1839 .setup = pci_default_setup, 1840 .exit = pci_ite887x_exit, 1841 }, 1842 /* 1843 * National Instruments 1844 */ 1845 { 1846 .vendor = PCI_VENDOR_ID_NI, 1847 .device = PCI_DEVICE_ID_NI_PCI23216, 1848 .subvendor = PCI_ANY_ID, 1849 .subdevice = PCI_ANY_ID, 1850 .init = pci_ni8420_init, 1851 .setup = pci_default_setup, 1852 .exit = pci_ni8420_exit, 1853 }, 1854 { 1855 .vendor = PCI_VENDOR_ID_NI, 1856 .device = PCI_DEVICE_ID_NI_PCI2328, 1857 .subvendor = PCI_ANY_ID, 1858 .subdevice = PCI_ANY_ID, 1859 .init = pci_ni8420_init, 1860 .setup = pci_default_setup, 1861 .exit = pci_ni8420_exit, 1862 }, 1863 { 1864 .vendor = PCI_VENDOR_ID_NI, 1865 .device = PCI_DEVICE_ID_NI_PCI2324, 1866 .subvendor = PCI_ANY_ID, 1867 .subdevice = PCI_ANY_ID, 1868 .init = pci_ni8420_init, 1869 .setup = pci_default_setup, 1870 .exit = pci_ni8420_exit, 1871 }, 1872 { 1873 .vendor = PCI_VENDOR_ID_NI, 1874 .device = PCI_DEVICE_ID_NI_PCI2322, 1875 .subvendor = PCI_ANY_ID, 1876 .subdevice = PCI_ANY_ID, 1877 .init = pci_ni8420_init, 1878 .setup = pci_default_setup, 1879 .exit = pci_ni8420_exit, 1880 }, 1881 { 1882 .vendor = PCI_VENDOR_ID_NI, 1883 .device = PCI_DEVICE_ID_NI_PCI2324I, 1884 .subvendor = PCI_ANY_ID, 1885 .subdevice = PCI_ANY_ID, 1886 .init = pci_ni8420_init, 1887 .setup = pci_default_setup, 1888 .exit = pci_ni8420_exit, 1889 }, 1890 { 1891 .vendor = PCI_VENDOR_ID_NI, 1892 .device = PCI_DEVICE_ID_NI_PCI2322I, 1893 .subvendor = PCI_ANY_ID, 1894 .subdevice = PCI_ANY_ID, 1895 .init = pci_ni8420_init, 1896 .setup = pci_default_setup, 1897 .exit = pci_ni8420_exit, 1898 }, 1899 { 1900 .vendor = PCI_VENDOR_ID_NI, 1901 .device = PCI_DEVICE_ID_NI_PXI8420_23216, 1902 .subvendor = PCI_ANY_ID, 1903 .subdevice = PCI_ANY_ID, 1904 .init = pci_ni8420_init, 1905 .setup = pci_default_setup, 1906 .exit = pci_ni8420_exit, 1907 }, 1908 { 1909 .vendor = PCI_VENDOR_ID_NI, 1910 .device = PCI_DEVICE_ID_NI_PXI8420_2328, 1911 .subvendor = PCI_ANY_ID, 1912 .subdevice = PCI_ANY_ID, 1913 .init = pci_ni8420_init, 1914 .setup = pci_default_setup, 1915 .exit = pci_ni8420_exit, 1916 }, 1917 { 1918 .vendor = PCI_VENDOR_ID_NI, 1919 .device = PCI_DEVICE_ID_NI_PXI8420_2324, 1920 .subvendor = PCI_ANY_ID, 1921 .subdevice = PCI_ANY_ID, 1922 .init = pci_ni8420_init, 1923 .setup = pci_default_setup, 1924 .exit = pci_ni8420_exit, 1925 }, 1926 { 1927 .vendor = PCI_VENDOR_ID_NI, 1928 .device = PCI_DEVICE_ID_NI_PXI8420_2322, 1929 .subvendor = PCI_ANY_ID, 1930 .subdevice = PCI_ANY_ID, 1931 .init = pci_ni8420_init, 1932 .setup = pci_default_setup, 1933 .exit = pci_ni8420_exit, 1934 }, 1935 { 1936 .vendor = PCI_VENDOR_ID_NI, 1937 .device = PCI_DEVICE_ID_NI_PXI8422_2324, 1938 .subvendor = PCI_ANY_ID, 1939 .subdevice = PCI_ANY_ID, 1940 .init = pci_ni8420_init, 1941 .setup = pci_default_setup, 1942 .exit = pci_ni8420_exit, 1943 }, 1944 { 1945 .vendor = PCI_VENDOR_ID_NI, 1946 .device = PCI_DEVICE_ID_NI_PXI8422_2322, 1947 .subvendor = PCI_ANY_ID, 1948 .subdevice = PCI_ANY_ID, 1949 .init = pci_ni8420_init, 1950 .setup = pci_default_setup, 1951 .exit = pci_ni8420_exit, 1952 }, 1953 { 1954 .vendor = PCI_VENDOR_ID_NI, 1955 .device = PCI_ANY_ID, 1956 .subvendor = PCI_ANY_ID, 1957 .subdevice = PCI_ANY_ID, 1958 .init = pci_ni8430_init, 1959 .setup = pci_ni8430_setup, 1960 .exit = pci_ni8430_exit, 1961 }, 1962 /* Quatech */ 1963 { 1964 .vendor = PCI_VENDOR_ID_QUATECH, 1965 .device = PCI_ANY_ID, 1966 .subvendor = PCI_ANY_ID, 1967 .subdevice = PCI_ANY_ID, 1968 .init = pci_quatech_init, 1969 .setup = pci_quatech_setup, 1970 .exit = pci_quatech_exit, 1971 }, 1972 /* 1973 * Panacom 1974 */ 1975 { 1976 .vendor = PCI_VENDOR_ID_PANACOM, 1977 .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, 1978 .subvendor = PCI_ANY_ID, 1979 .subdevice = PCI_ANY_ID, 1980 .init = pci_plx9050_init, 1981 .setup = pci_default_setup, 1982 .exit = pci_plx9050_exit, 1983 }, 1984 { 1985 .vendor = PCI_VENDOR_ID_PANACOM, 1986 .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, 1987 .subvendor = PCI_ANY_ID, 1988 .subdevice = PCI_ANY_ID, 1989 .init = pci_plx9050_init, 1990 .setup = pci_default_setup, 1991 .exit = pci_plx9050_exit, 1992 }, 1993 /* 1994 * Pericom (Only 7954 - It have a offset jump for port 4) 1995 */ 1996 { 1997 .vendor = PCI_VENDOR_ID_PERICOM, 1998 .device = PCI_DEVICE_ID_PERICOM_PI7C9X7954, 1999 .subvendor = PCI_ANY_ID, 2000 .subdevice = PCI_ANY_ID, 2001 .setup = pci_pericom_setup, 2002 }, 2003 /* 2004 * PLX 2005 */ 2006 { 2007 .vendor = PCI_VENDOR_ID_PLX, 2008 .device = PCI_DEVICE_ID_PLX_9050, 2009 .subvendor = PCI_SUBVENDOR_ID_EXSYS, 2010 .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, 2011 .init = pci_plx9050_init, 2012 .setup = pci_default_setup, 2013 .exit = pci_plx9050_exit, 2014 }, 2015 { 2016 .vendor = PCI_VENDOR_ID_PLX, 2017 .device = PCI_DEVICE_ID_PLX_9050, 2018 .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, 2019 .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, 2020 .init = pci_plx9050_init, 2021 .setup = pci_default_setup, 2022 .exit = pci_plx9050_exit, 2023 }, 2024 { 2025 .vendor = PCI_VENDOR_ID_PLX, 2026 .device = PCI_DEVICE_ID_PLX_ROMULUS, 2027 .subvendor = PCI_VENDOR_ID_PLX, 2028 .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, 2029 .init = pci_plx9050_init, 2030 .setup = pci_default_setup, 2031 .exit = pci_plx9050_exit, 2032 }, 2033 /* 2034 * SBS Technologies, Inc., PMC-OCTALPRO 232 2035 */ 2036 { 2037 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2038 .device = PCI_DEVICE_ID_OCTPRO, 2039 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2040 .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, 2041 .init = sbs_init, 2042 .setup = sbs_setup, 2043 .exit = sbs_exit, 2044 }, 2045 /* 2046 * SBS Technologies, Inc., PMC-OCTALPRO 422 2047 */ 2048 { 2049 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2050 .device = PCI_DEVICE_ID_OCTPRO, 2051 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2052 .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, 2053 .init = sbs_init, 2054 .setup = sbs_setup, 2055 .exit = sbs_exit, 2056 }, 2057 /* 2058 * SBS Technologies, Inc., P-Octal 232 2059 */ 2060 { 2061 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2062 .device = PCI_DEVICE_ID_OCTPRO, 2063 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2064 .subdevice = PCI_SUBDEVICE_ID_POCTAL232, 2065 .init = sbs_init, 2066 .setup = sbs_setup, 2067 .exit = sbs_exit, 2068 }, 2069 /* 2070 * SBS Technologies, Inc., P-Octal 422 2071 */ 2072 { 2073 .vendor = PCI_VENDOR_ID_SBSMODULARIO, 2074 .device = PCI_DEVICE_ID_OCTPRO, 2075 .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, 2076 .subdevice = PCI_SUBDEVICE_ID_POCTAL422, 2077 .init = sbs_init, 2078 .setup = sbs_setup, 2079 .exit = sbs_exit, 2080 }, 2081 /* 2082 * SIIG cards - these may be called via parport_serial 2083 */ 2084 { 2085 .vendor = PCI_VENDOR_ID_SIIG, 2086 .device = PCI_ANY_ID, 2087 .subvendor = PCI_ANY_ID, 2088 .subdevice = PCI_ANY_ID, 2089 .init = pci_siig_init, 2090 .setup = pci_siig_setup, 2091 }, 2092 /* 2093 * Titan cards 2094 */ 2095 { 2096 .vendor = PCI_VENDOR_ID_TITAN, 2097 .device = PCI_DEVICE_ID_TITAN_400L, 2098 .subvendor = PCI_ANY_ID, 2099 .subdevice = PCI_ANY_ID, 2100 .setup = titan_400l_800l_setup, 2101 }, 2102 { 2103 .vendor = PCI_VENDOR_ID_TITAN, 2104 .device = PCI_DEVICE_ID_TITAN_800L, 2105 .subvendor = PCI_ANY_ID, 2106 .subdevice = PCI_ANY_ID, 2107 .setup = titan_400l_800l_setup, 2108 }, 2109 /* 2110 * Timedia cards 2111 */ 2112 { 2113 .vendor = PCI_VENDOR_ID_TIMEDIA, 2114 .device = PCI_DEVICE_ID_TIMEDIA_1889, 2115 .subvendor = PCI_VENDOR_ID_TIMEDIA, 2116 .subdevice = PCI_ANY_ID, 2117 .probe = pci_timedia_probe, 2118 .init = pci_timedia_init, 2119 .setup = pci_timedia_setup, 2120 }, 2121 { 2122 .vendor = PCI_VENDOR_ID_TIMEDIA, 2123 .device = PCI_ANY_ID, 2124 .subvendor = PCI_ANY_ID, 2125 .subdevice = PCI_ANY_ID, 2126 .setup = pci_timedia_setup, 2127 }, 2128 /* 2129 * SUNIX (Timedia) cards 2130 * Do not "probe" for these cards as there is at least one combination 2131 * card that should be handled by parport_pc that doesn't match the 2132 * rule in pci_timedia_probe. 2133 * It is part number is MIO5079A but its subdevice ID is 0x0102. 2134 * There are some boards with part number SER5037AL that report 2135 * subdevice ID 0x0002. 2136 */ 2137 { 2138 .vendor = PCI_VENDOR_ID_SUNIX, 2139 .device = PCI_DEVICE_ID_SUNIX_1999, 2140 .subvendor = PCI_VENDOR_ID_SUNIX, 2141 .subdevice = PCI_ANY_ID, 2142 .init = pci_timedia_init, 2143 .setup = pci_timedia_setup, 2144 }, 2145 /* 2146 * Xircom cards 2147 */ 2148 { 2149 .vendor = PCI_VENDOR_ID_XIRCOM, 2150 .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, 2151 .subvendor = PCI_ANY_ID, 2152 .subdevice = PCI_ANY_ID, 2153 .init = pci_xircom_init, 2154 .setup = pci_default_setup, 2155 }, 2156 /* 2157 * Netmos cards - these may be called via parport_serial 2158 */ 2159 { 2160 .vendor = PCI_VENDOR_ID_NETMOS, 2161 .device = PCI_ANY_ID, 2162 .subvendor = PCI_ANY_ID, 2163 .subdevice = PCI_ANY_ID, 2164 .init = pci_netmos_init, 2165 .setup = pci_netmos_9900_setup, 2166 }, 2167 /* 2168 * EndRun Technologies 2169 */ 2170 { 2171 .vendor = PCI_VENDOR_ID_ENDRUN, 2172 .device = PCI_ANY_ID, 2173 .subvendor = PCI_ANY_ID, 2174 .subdevice = PCI_ANY_ID, 2175 .init = pci_endrun_init, 2176 .setup = pci_default_setup, 2177 }, 2178 /* 2179 * For Oxford Semiconductor Tornado based devices 2180 */ 2181 { 2182 .vendor = PCI_VENDOR_ID_OXSEMI, 2183 .device = PCI_ANY_ID, 2184 .subvendor = PCI_ANY_ID, 2185 .subdevice = PCI_ANY_ID, 2186 .init = pci_oxsemi_tornado_init, 2187 .setup = pci_default_setup, 2188 }, 2189 { 2190 .vendor = PCI_VENDOR_ID_MAINPINE, 2191 .device = PCI_ANY_ID, 2192 .subvendor = PCI_ANY_ID, 2193 .subdevice = PCI_ANY_ID, 2194 .init = pci_oxsemi_tornado_init, 2195 .setup = pci_default_setup, 2196 }, 2197 { 2198 .vendor = PCI_VENDOR_ID_DIGI, 2199 .device = PCIE_DEVICE_ID_NEO_2_OX_IBM, 2200 .subvendor = PCI_SUBVENDOR_ID_IBM, 2201 .subdevice = PCI_ANY_ID, 2202 .init = pci_oxsemi_tornado_init, 2203 .setup = pci_default_setup, 2204 }, 2205 { 2206 .vendor = PCI_VENDOR_ID_INTEL, 2207 .device = 0x8811, 2208 .subvendor = PCI_ANY_ID, 2209 .subdevice = PCI_ANY_ID, 2210 .init = pci_eg20t_init, 2211 .setup = pci_default_setup, 2212 }, 2213 { 2214 .vendor = PCI_VENDOR_ID_INTEL, 2215 .device = 0x8812, 2216 .subvendor = PCI_ANY_ID, 2217 .subdevice = PCI_ANY_ID, 2218 .init = pci_eg20t_init, 2219 .setup = pci_default_setup, 2220 }, 2221 { 2222 .vendor = PCI_VENDOR_ID_INTEL, 2223 .device = 0x8813, 2224 .subvendor = PCI_ANY_ID, 2225 .subdevice = PCI_ANY_ID, 2226 .init = pci_eg20t_init, 2227 .setup = pci_default_setup, 2228 }, 2229 { 2230 .vendor = PCI_VENDOR_ID_INTEL, 2231 .device = 0x8814, 2232 .subvendor = PCI_ANY_ID, 2233 .subdevice = PCI_ANY_ID, 2234 .init = pci_eg20t_init, 2235 .setup = pci_default_setup, 2236 }, 2237 { 2238 .vendor = 0x10DB, 2239 .device = 0x8027, 2240 .subvendor = PCI_ANY_ID, 2241 .subdevice = PCI_ANY_ID, 2242 .init = pci_eg20t_init, 2243 .setup = pci_default_setup, 2244 }, 2245 { 2246 .vendor = 0x10DB, 2247 .device = 0x8028, 2248 .subvendor = PCI_ANY_ID, 2249 .subdevice = PCI_ANY_ID, 2250 .init = pci_eg20t_init, 2251 .setup = pci_default_setup, 2252 }, 2253 { 2254 .vendor = 0x10DB, 2255 .device = 0x8029, 2256 .subvendor = PCI_ANY_ID, 2257 .subdevice = PCI_ANY_ID, 2258 .init = pci_eg20t_init, 2259 .setup = pci_default_setup, 2260 }, 2261 { 2262 .vendor = 0x10DB, 2263 .device = 0x800C, 2264 .subvendor = PCI_ANY_ID, 2265 .subdevice = PCI_ANY_ID, 2266 .init = pci_eg20t_init, 2267 .setup = pci_default_setup, 2268 }, 2269 { 2270 .vendor = 0x10DB, 2271 .device = 0x800D, 2272 .subvendor = PCI_ANY_ID, 2273 .subdevice = PCI_ANY_ID, 2274 .init = pci_eg20t_init, 2275 .setup = pci_default_setup, 2276 }, 2277 /* 2278 * Cronyx Omega PCI (PLX-chip based) 2279 */ 2280 { 2281 .vendor = PCI_VENDOR_ID_PLX, 2282 .device = PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 2283 .subvendor = PCI_ANY_ID, 2284 .subdevice = PCI_ANY_ID, 2285 .setup = pci_omegapci_setup, 2286 }, 2287 /* WCH CH353 1S1P card (16550 clone) */ 2288 { 2289 .vendor = PCI_VENDOR_ID_WCH, 2290 .device = PCI_DEVICE_ID_WCH_CH353_1S1P, 2291 .subvendor = PCI_ANY_ID, 2292 .subdevice = PCI_ANY_ID, 2293 .setup = pci_wch_ch353_setup, 2294 }, 2295 /* WCH CH353 2S1P card (16550 clone) */ 2296 { 2297 .vendor = PCI_VENDOR_ID_WCH, 2298 .device = PCI_DEVICE_ID_WCH_CH353_2S1P, 2299 .subvendor = PCI_ANY_ID, 2300 .subdevice = PCI_ANY_ID, 2301 .setup = pci_wch_ch353_setup, 2302 }, 2303 /* WCH CH353 4S card (16550 clone) */ 2304 { 2305 .vendor = PCI_VENDOR_ID_WCH, 2306 .device = PCI_DEVICE_ID_WCH_CH353_4S, 2307 .subvendor = PCI_ANY_ID, 2308 .subdevice = PCI_ANY_ID, 2309 .setup = pci_wch_ch353_setup, 2310 }, 2311 /* WCH CH353 2S1PF card (16550 clone) */ 2312 { 2313 .vendor = PCI_VENDOR_ID_WCH, 2314 .device = PCI_DEVICE_ID_WCH_CH353_2S1PF, 2315 .subvendor = PCI_ANY_ID, 2316 .subdevice = PCI_ANY_ID, 2317 .setup = pci_wch_ch353_setup, 2318 }, 2319 /* WCH CH352 2S card (16550 clone) */ 2320 { 2321 .vendor = PCI_VENDOR_ID_WCH, 2322 .device = PCI_DEVICE_ID_WCH_CH352_2S, 2323 .subvendor = PCI_ANY_ID, 2324 .subdevice = PCI_ANY_ID, 2325 .setup = pci_wch_ch353_setup, 2326 }, 2327 /* WCH CH355 4S card (16550 clone) */ 2328 { 2329 .vendor = PCI_VENDOR_ID_WCH, 2330 .device = PCI_DEVICE_ID_WCH_CH355_4S, 2331 .subvendor = PCI_ANY_ID, 2332 .subdevice = PCI_ANY_ID, 2333 .setup = pci_wch_ch355_setup, 2334 }, 2335 /* WCH CH382 2S card (16850 clone) */ 2336 { 2337 .vendor = PCIE_VENDOR_ID_WCH, 2338 .device = PCIE_DEVICE_ID_WCH_CH382_2S, 2339 .subvendor = PCI_ANY_ID, 2340 .subdevice = PCI_ANY_ID, 2341 .setup = pci_wch_ch38x_setup, 2342 }, 2343 /* WCH CH382 2S1P card (16850 clone) */ 2344 { 2345 .vendor = PCIE_VENDOR_ID_WCH, 2346 .device = PCIE_DEVICE_ID_WCH_CH382_2S1P, 2347 .subvendor = PCI_ANY_ID, 2348 .subdevice = PCI_ANY_ID, 2349 .setup = pci_wch_ch38x_setup, 2350 }, 2351 /* WCH CH384 4S card (16850 clone) */ 2352 { 2353 .vendor = PCIE_VENDOR_ID_WCH, 2354 .device = PCIE_DEVICE_ID_WCH_CH384_4S, 2355 .subvendor = PCI_ANY_ID, 2356 .subdevice = PCI_ANY_ID, 2357 .setup = pci_wch_ch38x_setup, 2358 }, 2359 /* 2360 * ASIX devices with FIFO bug 2361 */ 2362 { 2363 .vendor = PCI_VENDOR_ID_ASIX, 2364 .device = PCI_ANY_ID, 2365 .subvendor = PCI_ANY_ID, 2366 .subdevice = PCI_ANY_ID, 2367 .setup = pci_asix_setup, 2368 }, 2369 /* 2370 * Broadcom TruManage (NetXtreme) 2371 */ 2372 { 2373 .vendor = PCI_VENDOR_ID_BROADCOM, 2374 .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 2375 .subvendor = PCI_ANY_ID, 2376 .subdevice = PCI_ANY_ID, 2377 .setup = pci_brcm_trumanage_setup, 2378 }, 2379 { 2380 .vendor = 0x1c29, 2381 .device = 0x1104, 2382 .subvendor = PCI_ANY_ID, 2383 .subdevice = PCI_ANY_ID, 2384 .setup = pci_fintek_setup, 2385 .init = pci_fintek_init, 2386 }, 2387 { 2388 .vendor = 0x1c29, 2389 .device = 0x1108, 2390 .subvendor = PCI_ANY_ID, 2391 .subdevice = PCI_ANY_ID, 2392 .setup = pci_fintek_setup, 2393 .init = pci_fintek_init, 2394 }, 2395 { 2396 .vendor = 0x1c29, 2397 .device = 0x1112, 2398 .subvendor = PCI_ANY_ID, 2399 .subdevice = PCI_ANY_ID, 2400 .setup = pci_fintek_setup, 2401 .init = pci_fintek_init, 2402 }, 2403 2404 /* 2405 * Default "match everything" terminator entry 2406 */ 2407 { 2408 .vendor = PCI_ANY_ID, 2409 .device = PCI_ANY_ID, 2410 .subvendor = PCI_ANY_ID, 2411 .subdevice = PCI_ANY_ID, 2412 .setup = pci_default_setup, 2413 } 2414 }; 2415 2416 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) 2417 { 2418 return quirk_id == PCI_ANY_ID || quirk_id == dev_id; 2419 } 2420 2421 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) 2422 { 2423 struct pci_serial_quirk *quirk; 2424 2425 for (quirk = pci_serial_quirks; ; quirk++) 2426 if (quirk_id_matches(quirk->vendor, dev->vendor) && 2427 quirk_id_matches(quirk->device, dev->device) && 2428 quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && 2429 quirk_id_matches(quirk->subdevice, dev->subsystem_device)) 2430 break; 2431 return quirk; 2432 } 2433 2434 static inline int get_pci_irq(struct pci_dev *dev, 2435 const struct pciserial_board *board) 2436 { 2437 if (board->flags & FL_NOIRQ) 2438 return 0; 2439 else 2440 return dev->irq; 2441 } 2442 2443 /* 2444 * This is the configuration table for all of the PCI serial boards 2445 * which we support. It is directly indexed by the pci_board_num_t enum 2446 * value, which is encoded in the pci_device_id PCI probe table's 2447 * driver_data member. 2448 * 2449 * The makeup of these names are: 2450 * pbn_bn{_bt}_n_baud{_offsetinhex} 2451 * 2452 * bn = PCI BAR number 2453 * bt = Index using PCI BARs 2454 * n = number of serial ports 2455 * baud = baud rate 2456 * offsetinhex = offset for each sequential port (in hex) 2457 * 2458 * This table is sorted by (in order): bn, bt, baud, offsetindex, n. 2459 * 2460 * Please note: in theory if n = 1, _bt infix should make no difference. 2461 * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 2462 */ 2463 enum pci_board_num_t { 2464 pbn_default = 0, 2465 2466 pbn_b0_1_115200, 2467 pbn_b0_2_115200, 2468 pbn_b0_4_115200, 2469 pbn_b0_5_115200, 2470 pbn_b0_8_115200, 2471 2472 pbn_b0_1_921600, 2473 pbn_b0_2_921600, 2474 pbn_b0_4_921600, 2475 2476 pbn_b0_2_1130000, 2477 2478 pbn_b0_4_1152000, 2479 2480 pbn_b0_4_1250000, 2481 2482 pbn_b0_2_1843200, 2483 pbn_b0_4_1843200, 2484 2485 pbn_b0_1_4000000, 2486 2487 pbn_b0_bt_1_115200, 2488 pbn_b0_bt_2_115200, 2489 pbn_b0_bt_4_115200, 2490 pbn_b0_bt_8_115200, 2491 2492 pbn_b0_bt_1_460800, 2493 pbn_b0_bt_2_460800, 2494 pbn_b0_bt_4_460800, 2495 2496 pbn_b0_bt_1_921600, 2497 pbn_b0_bt_2_921600, 2498 pbn_b0_bt_4_921600, 2499 pbn_b0_bt_8_921600, 2500 2501 pbn_b1_1_115200, 2502 pbn_b1_2_115200, 2503 pbn_b1_4_115200, 2504 pbn_b1_8_115200, 2505 pbn_b1_16_115200, 2506 2507 pbn_b1_1_921600, 2508 pbn_b1_2_921600, 2509 pbn_b1_4_921600, 2510 pbn_b1_8_921600, 2511 2512 pbn_b1_2_1250000, 2513 2514 pbn_b1_bt_1_115200, 2515 pbn_b1_bt_2_115200, 2516 pbn_b1_bt_4_115200, 2517 2518 pbn_b1_bt_2_921600, 2519 2520 pbn_b1_1_1382400, 2521 pbn_b1_2_1382400, 2522 pbn_b1_4_1382400, 2523 pbn_b1_8_1382400, 2524 2525 pbn_b2_1_115200, 2526 pbn_b2_2_115200, 2527 pbn_b2_4_115200, 2528 pbn_b2_8_115200, 2529 2530 pbn_b2_1_460800, 2531 pbn_b2_4_460800, 2532 pbn_b2_8_460800, 2533 pbn_b2_16_460800, 2534 2535 pbn_b2_1_921600, 2536 pbn_b2_4_921600, 2537 pbn_b2_8_921600, 2538 2539 pbn_b2_8_1152000, 2540 2541 pbn_b2_bt_1_115200, 2542 pbn_b2_bt_2_115200, 2543 pbn_b2_bt_4_115200, 2544 2545 pbn_b2_bt_2_921600, 2546 pbn_b2_bt_4_921600, 2547 2548 pbn_b3_2_115200, 2549 pbn_b3_4_115200, 2550 pbn_b3_8_115200, 2551 2552 pbn_b4_bt_2_921600, 2553 pbn_b4_bt_4_921600, 2554 pbn_b4_bt_8_921600, 2555 2556 /* 2557 * Board-specific versions. 2558 */ 2559 pbn_panacom, 2560 pbn_panacom2, 2561 pbn_panacom4, 2562 pbn_plx_romulus, 2563 pbn_endrun_2_4000000, 2564 pbn_oxsemi, 2565 pbn_oxsemi_1_4000000, 2566 pbn_oxsemi_2_4000000, 2567 pbn_oxsemi_4_4000000, 2568 pbn_oxsemi_8_4000000, 2569 pbn_intel_i960, 2570 pbn_sgi_ioc3, 2571 pbn_computone_4, 2572 pbn_computone_6, 2573 pbn_computone_8, 2574 pbn_sbsxrsio, 2575 pbn_pasemi_1682M, 2576 pbn_ni8430_2, 2577 pbn_ni8430_4, 2578 pbn_ni8430_8, 2579 pbn_ni8430_16, 2580 pbn_ADDIDATA_PCIe_1_3906250, 2581 pbn_ADDIDATA_PCIe_2_3906250, 2582 pbn_ADDIDATA_PCIe_4_3906250, 2583 pbn_ADDIDATA_PCIe_8_3906250, 2584 pbn_ce4100_1_115200, 2585 pbn_omegapci, 2586 pbn_NETMOS9900_2s_115200, 2587 pbn_brcm_trumanage, 2588 pbn_fintek_4, 2589 pbn_fintek_8, 2590 pbn_fintek_12, 2591 pbn_wch382_2, 2592 pbn_wch384_4, 2593 pbn_pericom_PI7C9X7951, 2594 pbn_pericom_PI7C9X7952, 2595 pbn_pericom_PI7C9X7954, 2596 pbn_pericom_PI7C9X7958, 2597 }; 2598 2599 /* 2600 * uart_offset - the space between channels 2601 * reg_shift - describes how the UART registers are mapped 2602 * to PCI memory by the card. 2603 * For example IER register on SBS, Inc. PMC-OctPro is located at 2604 * offset 0x10 from the UART base, while UART_IER is defined as 1 2605 * in include/linux/serial_reg.h, 2606 * see first lines of serial_in() and serial_out() in 8250.c 2607 */ 2608 2609 static struct pciserial_board pci_boards[] = { 2610 [pbn_default] = { 2611 .flags = FL_BASE0, 2612 .num_ports = 1, 2613 .base_baud = 115200, 2614 .uart_offset = 8, 2615 }, 2616 [pbn_b0_1_115200] = { 2617 .flags = FL_BASE0, 2618 .num_ports = 1, 2619 .base_baud = 115200, 2620 .uart_offset = 8, 2621 }, 2622 [pbn_b0_2_115200] = { 2623 .flags = FL_BASE0, 2624 .num_ports = 2, 2625 .base_baud = 115200, 2626 .uart_offset = 8, 2627 }, 2628 [pbn_b0_4_115200] = { 2629 .flags = FL_BASE0, 2630 .num_ports = 4, 2631 .base_baud = 115200, 2632 .uart_offset = 8, 2633 }, 2634 [pbn_b0_5_115200] = { 2635 .flags = FL_BASE0, 2636 .num_ports = 5, 2637 .base_baud = 115200, 2638 .uart_offset = 8, 2639 }, 2640 [pbn_b0_8_115200] = { 2641 .flags = FL_BASE0, 2642 .num_ports = 8, 2643 .base_baud = 115200, 2644 .uart_offset = 8, 2645 }, 2646 [pbn_b0_1_921600] = { 2647 .flags = FL_BASE0, 2648 .num_ports = 1, 2649 .base_baud = 921600, 2650 .uart_offset = 8, 2651 }, 2652 [pbn_b0_2_921600] = { 2653 .flags = FL_BASE0, 2654 .num_ports = 2, 2655 .base_baud = 921600, 2656 .uart_offset = 8, 2657 }, 2658 [pbn_b0_4_921600] = { 2659 .flags = FL_BASE0, 2660 .num_ports = 4, 2661 .base_baud = 921600, 2662 .uart_offset = 8, 2663 }, 2664 2665 [pbn_b0_2_1130000] = { 2666 .flags = FL_BASE0, 2667 .num_ports = 2, 2668 .base_baud = 1130000, 2669 .uart_offset = 8, 2670 }, 2671 2672 [pbn_b0_4_1152000] = { 2673 .flags = FL_BASE0, 2674 .num_ports = 4, 2675 .base_baud = 1152000, 2676 .uart_offset = 8, 2677 }, 2678 2679 [pbn_b0_4_1250000] = { 2680 .flags = FL_BASE0, 2681 .num_ports = 4, 2682 .base_baud = 1250000, 2683 .uart_offset = 8, 2684 }, 2685 2686 [pbn_b0_2_1843200] = { 2687 .flags = FL_BASE0, 2688 .num_ports = 2, 2689 .base_baud = 1843200, 2690 .uart_offset = 8, 2691 }, 2692 [pbn_b0_4_1843200] = { 2693 .flags = FL_BASE0, 2694 .num_ports = 4, 2695 .base_baud = 1843200, 2696 .uart_offset = 8, 2697 }, 2698 2699 [pbn_b0_1_4000000] = { 2700 .flags = FL_BASE0, 2701 .num_ports = 1, 2702 .base_baud = 4000000, 2703 .uart_offset = 8, 2704 }, 2705 2706 [pbn_b0_bt_1_115200] = { 2707 .flags = FL_BASE0|FL_BASE_BARS, 2708 .num_ports = 1, 2709 .base_baud = 115200, 2710 .uart_offset = 8, 2711 }, 2712 [pbn_b0_bt_2_115200] = { 2713 .flags = FL_BASE0|FL_BASE_BARS, 2714 .num_ports = 2, 2715 .base_baud = 115200, 2716 .uart_offset = 8, 2717 }, 2718 [pbn_b0_bt_4_115200] = { 2719 .flags = FL_BASE0|FL_BASE_BARS, 2720 .num_ports = 4, 2721 .base_baud = 115200, 2722 .uart_offset = 8, 2723 }, 2724 [pbn_b0_bt_8_115200] = { 2725 .flags = FL_BASE0|FL_BASE_BARS, 2726 .num_ports = 8, 2727 .base_baud = 115200, 2728 .uart_offset = 8, 2729 }, 2730 2731 [pbn_b0_bt_1_460800] = { 2732 .flags = FL_BASE0|FL_BASE_BARS, 2733 .num_ports = 1, 2734 .base_baud = 460800, 2735 .uart_offset = 8, 2736 }, 2737 [pbn_b0_bt_2_460800] = { 2738 .flags = FL_BASE0|FL_BASE_BARS, 2739 .num_ports = 2, 2740 .base_baud = 460800, 2741 .uart_offset = 8, 2742 }, 2743 [pbn_b0_bt_4_460800] = { 2744 .flags = FL_BASE0|FL_BASE_BARS, 2745 .num_ports = 4, 2746 .base_baud = 460800, 2747 .uart_offset = 8, 2748 }, 2749 2750 [pbn_b0_bt_1_921600] = { 2751 .flags = FL_BASE0|FL_BASE_BARS, 2752 .num_ports = 1, 2753 .base_baud = 921600, 2754 .uart_offset = 8, 2755 }, 2756 [pbn_b0_bt_2_921600] = { 2757 .flags = FL_BASE0|FL_BASE_BARS, 2758 .num_ports = 2, 2759 .base_baud = 921600, 2760 .uart_offset = 8, 2761 }, 2762 [pbn_b0_bt_4_921600] = { 2763 .flags = FL_BASE0|FL_BASE_BARS, 2764 .num_ports = 4, 2765 .base_baud = 921600, 2766 .uart_offset = 8, 2767 }, 2768 [pbn_b0_bt_8_921600] = { 2769 .flags = FL_BASE0|FL_BASE_BARS, 2770 .num_ports = 8, 2771 .base_baud = 921600, 2772 .uart_offset = 8, 2773 }, 2774 2775 [pbn_b1_1_115200] = { 2776 .flags = FL_BASE1, 2777 .num_ports = 1, 2778 .base_baud = 115200, 2779 .uart_offset = 8, 2780 }, 2781 [pbn_b1_2_115200] = { 2782 .flags = FL_BASE1, 2783 .num_ports = 2, 2784 .base_baud = 115200, 2785 .uart_offset = 8, 2786 }, 2787 [pbn_b1_4_115200] = { 2788 .flags = FL_BASE1, 2789 .num_ports = 4, 2790 .base_baud = 115200, 2791 .uart_offset = 8, 2792 }, 2793 [pbn_b1_8_115200] = { 2794 .flags = FL_BASE1, 2795 .num_ports = 8, 2796 .base_baud = 115200, 2797 .uart_offset = 8, 2798 }, 2799 [pbn_b1_16_115200] = { 2800 .flags = FL_BASE1, 2801 .num_ports = 16, 2802 .base_baud = 115200, 2803 .uart_offset = 8, 2804 }, 2805 2806 [pbn_b1_1_921600] = { 2807 .flags = FL_BASE1, 2808 .num_ports = 1, 2809 .base_baud = 921600, 2810 .uart_offset = 8, 2811 }, 2812 [pbn_b1_2_921600] = { 2813 .flags = FL_BASE1, 2814 .num_ports = 2, 2815 .base_baud = 921600, 2816 .uart_offset = 8, 2817 }, 2818 [pbn_b1_4_921600] = { 2819 .flags = FL_BASE1, 2820 .num_ports = 4, 2821 .base_baud = 921600, 2822 .uart_offset = 8, 2823 }, 2824 [pbn_b1_8_921600] = { 2825 .flags = FL_BASE1, 2826 .num_ports = 8, 2827 .base_baud = 921600, 2828 .uart_offset = 8, 2829 }, 2830 [pbn_b1_2_1250000] = { 2831 .flags = FL_BASE1, 2832 .num_ports = 2, 2833 .base_baud = 1250000, 2834 .uart_offset = 8, 2835 }, 2836 2837 [pbn_b1_bt_1_115200] = { 2838 .flags = FL_BASE1|FL_BASE_BARS, 2839 .num_ports = 1, 2840 .base_baud = 115200, 2841 .uart_offset = 8, 2842 }, 2843 [pbn_b1_bt_2_115200] = { 2844 .flags = FL_BASE1|FL_BASE_BARS, 2845 .num_ports = 2, 2846 .base_baud = 115200, 2847 .uart_offset = 8, 2848 }, 2849 [pbn_b1_bt_4_115200] = { 2850 .flags = FL_BASE1|FL_BASE_BARS, 2851 .num_ports = 4, 2852 .base_baud = 115200, 2853 .uart_offset = 8, 2854 }, 2855 2856 [pbn_b1_bt_2_921600] = { 2857 .flags = FL_BASE1|FL_BASE_BARS, 2858 .num_ports = 2, 2859 .base_baud = 921600, 2860 .uart_offset = 8, 2861 }, 2862 2863 [pbn_b1_1_1382400] = { 2864 .flags = FL_BASE1, 2865 .num_ports = 1, 2866 .base_baud = 1382400, 2867 .uart_offset = 8, 2868 }, 2869 [pbn_b1_2_1382400] = { 2870 .flags = FL_BASE1, 2871 .num_ports = 2, 2872 .base_baud = 1382400, 2873 .uart_offset = 8, 2874 }, 2875 [pbn_b1_4_1382400] = { 2876 .flags = FL_BASE1, 2877 .num_ports = 4, 2878 .base_baud = 1382400, 2879 .uart_offset = 8, 2880 }, 2881 [pbn_b1_8_1382400] = { 2882 .flags = FL_BASE1, 2883 .num_ports = 8, 2884 .base_baud = 1382400, 2885 .uart_offset = 8, 2886 }, 2887 2888 [pbn_b2_1_115200] = { 2889 .flags = FL_BASE2, 2890 .num_ports = 1, 2891 .base_baud = 115200, 2892 .uart_offset = 8, 2893 }, 2894 [pbn_b2_2_115200] = { 2895 .flags = FL_BASE2, 2896 .num_ports = 2, 2897 .base_baud = 115200, 2898 .uart_offset = 8, 2899 }, 2900 [pbn_b2_4_115200] = { 2901 .flags = FL_BASE2, 2902 .num_ports = 4, 2903 .base_baud = 115200, 2904 .uart_offset = 8, 2905 }, 2906 [pbn_b2_8_115200] = { 2907 .flags = FL_BASE2, 2908 .num_ports = 8, 2909 .base_baud = 115200, 2910 .uart_offset = 8, 2911 }, 2912 2913 [pbn_b2_1_460800] = { 2914 .flags = FL_BASE2, 2915 .num_ports = 1, 2916 .base_baud = 460800, 2917 .uart_offset = 8, 2918 }, 2919 [pbn_b2_4_460800] = { 2920 .flags = FL_BASE2, 2921 .num_ports = 4, 2922 .base_baud = 460800, 2923 .uart_offset = 8, 2924 }, 2925 [pbn_b2_8_460800] = { 2926 .flags = FL_BASE2, 2927 .num_ports = 8, 2928 .base_baud = 460800, 2929 .uart_offset = 8, 2930 }, 2931 [pbn_b2_16_460800] = { 2932 .flags = FL_BASE2, 2933 .num_ports = 16, 2934 .base_baud = 460800, 2935 .uart_offset = 8, 2936 }, 2937 2938 [pbn_b2_1_921600] = { 2939 .flags = FL_BASE2, 2940 .num_ports = 1, 2941 .base_baud = 921600, 2942 .uart_offset = 8, 2943 }, 2944 [pbn_b2_4_921600] = { 2945 .flags = FL_BASE2, 2946 .num_ports = 4, 2947 .base_baud = 921600, 2948 .uart_offset = 8, 2949 }, 2950 [pbn_b2_8_921600] = { 2951 .flags = FL_BASE2, 2952 .num_ports = 8, 2953 .base_baud = 921600, 2954 .uart_offset = 8, 2955 }, 2956 2957 [pbn_b2_8_1152000] = { 2958 .flags = FL_BASE2, 2959 .num_ports = 8, 2960 .base_baud = 1152000, 2961 .uart_offset = 8, 2962 }, 2963 2964 [pbn_b2_bt_1_115200] = { 2965 .flags = FL_BASE2|FL_BASE_BARS, 2966 .num_ports = 1, 2967 .base_baud = 115200, 2968 .uart_offset = 8, 2969 }, 2970 [pbn_b2_bt_2_115200] = { 2971 .flags = FL_BASE2|FL_BASE_BARS, 2972 .num_ports = 2, 2973 .base_baud = 115200, 2974 .uart_offset = 8, 2975 }, 2976 [pbn_b2_bt_4_115200] = { 2977 .flags = FL_BASE2|FL_BASE_BARS, 2978 .num_ports = 4, 2979 .base_baud = 115200, 2980 .uart_offset = 8, 2981 }, 2982 2983 [pbn_b2_bt_2_921600] = { 2984 .flags = FL_BASE2|FL_BASE_BARS, 2985 .num_ports = 2, 2986 .base_baud = 921600, 2987 .uart_offset = 8, 2988 }, 2989 [pbn_b2_bt_4_921600] = { 2990 .flags = FL_BASE2|FL_BASE_BARS, 2991 .num_ports = 4, 2992 .base_baud = 921600, 2993 .uart_offset = 8, 2994 }, 2995 2996 [pbn_b3_2_115200] = { 2997 .flags = FL_BASE3, 2998 .num_ports = 2, 2999 .base_baud = 115200, 3000 .uart_offset = 8, 3001 }, 3002 [pbn_b3_4_115200] = { 3003 .flags = FL_BASE3, 3004 .num_ports = 4, 3005 .base_baud = 115200, 3006 .uart_offset = 8, 3007 }, 3008 [pbn_b3_8_115200] = { 3009 .flags = FL_BASE3, 3010 .num_ports = 8, 3011 .base_baud = 115200, 3012 .uart_offset = 8, 3013 }, 3014 3015 [pbn_b4_bt_2_921600] = { 3016 .flags = FL_BASE4, 3017 .num_ports = 2, 3018 .base_baud = 921600, 3019 .uart_offset = 8, 3020 }, 3021 [pbn_b4_bt_4_921600] = { 3022 .flags = FL_BASE4, 3023 .num_ports = 4, 3024 .base_baud = 921600, 3025 .uart_offset = 8, 3026 }, 3027 [pbn_b4_bt_8_921600] = { 3028 .flags = FL_BASE4, 3029 .num_ports = 8, 3030 .base_baud = 921600, 3031 .uart_offset = 8, 3032 }, 3033 3034 /* 3035 * Entries following this are board-specific. 3036 */ 3037 3038 /* 3039 * Panacom - IOMEM 3040 */ 3041 [pbn_panacom] = { 3042 .flags = FL_BASE2, 3043 .num_ports = 2, 3044 .base_baud = 921600, 3045 .uart_offset = 0x400, 3046 .reg_shift = 7, 3047 }, 3048 [pbn_panacom2] = { 3049 .flags = FL_BASE2|FL_BASE_BARS, 3050 .num_ports = 2, 3051 .base_baud = 921600, 3052 .uart_offset = 0x400, 3053 .reg_shift = 7, 3054 }, 3055 [pbn_panacom4] = { 3056 .flags = FL_BASE2|FL_BASE_BARS, 3057 .num_ports = 4, 3058 .base_baud = 921600, 3059 .uart_offset = 0x400, 3060 .reg_shift = 7, 3061 }, 3062 3063 /* I think this entry is broken - the first_offset looks wrong --rmk */ 3064 [pbn_plx_romulus] = { 3065 .flags = FL_BASE2, 3066 .num_ports = 4, 3067 .base_baud = 921600, 3068 .uart_offset = 8 << 2, 3069 .reg_shift = 2, 3070 .first_offset = 0x03, 3071 }, 3072 3073 /* 3074 * EndRun Technologies 3075 * Uses the size of PCI Base region 0 to 3076 * signal now many ports are available 3077 * 2 port 952 Uart support 3078 */ 3079 [pbn_endrun_2_4000000] = { 3080 .flags = FL_BASE0, 3081 .num_ports = 2, 3082 .base_baud = 4000000, 3083 .uart_offset = 0x200, 3084 .first_offset = 0x1000, 3085 }, 3086 3087 /* 3088 * This board uses the size of PCI Base region 0 to 3089 * signal now many ports are available 3090 */ 3091 [pbn_oxsemi] = { 3092 .flags = FL_BASE0|FL_REGION_SZ_CAP, 3093 .num_ports = 32, 3094 .base_baud = 115200, 3095 .uart_offset = 8, 3096 }, 3097 [pbn_oxsemi_1_4000000] = { 3098 .flags = FL_BASE0, 3099 .num_ports = 1, 3100 .base_baud = 4000000, 3101 .uart_offset = 0x200, 3102 .first_offset = 0x1000, 3103 }, 3104 [pbn_oxsemi_2_4000000] = { 3105 .flags = FL_BASE0, 3106 .num_ports = 2, 3107 .base_baud = 4000000, 3108 .uart_offset = 0x200, 3109 .first_offset = 0x1000, 3110 }, 3111 [pbn_oxsemi_4_4000000] = { 3112 .flags = FL_BASE0, 3113 .num_ports = 4, 3114 .base_baud = 4000000, 3115 .uart_offset = 0x200, 3116 .first_offset = 0x1000, 3117 }, 3118 [pbn_oxsemi_8_4000000] = { 3119 .flags = FL_BASE0, 3120 .num_ports = 8, 3121 .base_baud = 4000000, 3122 .uart_offset = 0x200, 3123 .first_offset = 0x1000, 3124 }, 3125 3126 3127 /* 3128 * EKF addition for i960 Boards form EKF with serial port. 3129 * Max 256 ports. 3130 */ 3131 [pbn_intel_i960] = { 3132 .flags = FL_BASE0, 3133 .num_ports = 32, 3134 .base_baud = 921600, 3135 .uart_offset = 8 << 2, 3136 .reg_shift = 2, 3137 .first_offset = 0x10000, 3138 }, 3139 [pbn_sgi_ioc3] = { 3140 .flags = FL_BASE0|FL_NOIRQ, 3141 .num_ports = 1, 3142 .base_baud = 458333, 3143 .uart_offset = 8, 3144 .reg_shift = 0, 3145 .first_offset = 0x20178, 3146 }, 3147 3148 /* 3149 * Computone - uses IOMEM. 3150 */ 3151 [pbn_computone_4] = { 3152 .flags = FL_BASE0, 3153 .num_ports = 4, 3154 .base_baud = 921600, 3155 .uart_offset = 0x40, 3156 .reg_shift = 2, 3157 .first_offset = 0x200, 3158 }, 3159 [pbn_computone_6] = { 3160 .flags = FL_BASE0, 3161 .num_ports = 6, 3162 .base_baud = 921600, 3163 .uart_offset = 0x40, 3164 .reg_shift = 2, 3165 .first_offset = 0x200, 3166 }, 3167 [pbn_computone_8] = { 3168 .flags = FL_BASE0, 3169 .num_ports = 8, 3170 .base_baud = 921600, 3171 .uart_offset = 0x40, 3172 .reg_shift = 2, 3173 .first_offset = 0x200, 3174 }, 3175 [pbn_sbsxrsio] = { 3176 .flags = FL_BASE0, 3177 .num_ports = 8, 3178 .base_baud = 460800, 3179 .uart_offset = 256, 3180 .reg_shift = 4, 3181 }, 3182 /* 3183 * PA Semi PWRficient PA6T-1682M on-chip UART 3184 */ 3185 [pbn_pasemi_1682M] = { 3186 .flags = FL_BASE0, 3187 .num_ports = 1, 3188 .base_baud = 8333333, 3189 }, 3190 /* 3191 * National Instruments 843x 3192 */ 3193 [pbn_ni8430_16] = { 3194 .flags = FL_BASE0, 3195 .num_ports = 16, 3196 .base_baud = 3686400, 3197 .uart_offset = 0x10, 3198 .first_offset = 0x800, 3199 }, 3200 [pbn_ni8430_8] = { 3201 .flags = FL_BASE0, 3202 .num_ports = 8, 3203 .base_baud = 3686400, 3204 .uart_offset = 0x10, 3205 .first_offset = 0x800, 3206 }, 3207 [pbn_ni8430_4] = { 3208 .flags = FL_BASE0, 3209 .num_ports = 4, 3210 .base_baud = 3686400, 3211 .uart_offset = 0x10, 3212 .first_offset = 0x800, 3213 }, 3214 [pbn_ni8430_2] = { 3215 .flags = FL_BASE0, 3216 .num_ports = 2, 3217 .base_baud = 3686400, 3218 .uart_offset = 0x10, 3219 .first_offset = 0x800, 3220 }, 3221 /* 3222 * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com> 3223 */ 3224 [pbn_ADDIDATA_PCIe_1_3906250] = { 3225 .flags = FL_BASE0, 3226 .num_ports = 1, 3227 .base_baud = 3906250, 3228 .uart_offset = 0x200, 3229 .first_offset = 0x1000, 3230 }, 3231 [pbn_ADDIDATA_PCIe_2_3906250] = { 3232 .flags = FL_BASE0, 3233 .num_ports = 2, 3234 .base_baud = 3906250, 3235 .uart_offset = 0x200, 3236 .first_offset = 0x1000, 3237 }, 3238 [pbn_ADDIDATA_PCIe_4_3906250] = { 3239 .flags = FL_BASE0, 3240 .num_ports = 4, 3241 .base_baud = 3906250, 3242 .uart_offset = 0x200, 3243 .first_offset = 0x1000, 3244 }, 3245 [pbn_ADDIDATA_PCIe_8_3906250] = { 3246 .flags = FL_BASE0, 3247 .num_ports = 8, 3248 .base_baud = 3906250, 3249 .uart_offset = 0x200, 3250 .first_offset = 0x1000, 3251 }, 3252 [pbn_ce4100_1_115200] = { 3253 .flags = FL_BASE_BARS, 3254 .num_ports = 2, 3255 .base_baud = 921600, 3256 .reg_shift = 2, 3257 }, 3258 [pbn_omegapci] = { 3259 .flags = FL_BASE0, 3260 .num_ports = 8, 3261 .base_baud = 115200, 3262 .uart_offset = 0x200, 3263 }, 3264 [pbn_NETMOS9900_2s_115200] = { 3265 .flags = FL_BASE0, 3266 .num_ports = 2, 3267 .base_baud = 115200, 3268 }, 3269 [pbn_brcm_trumanage] = { 3270 .flags = FL_BASE0, 3271 .num_ports = 1, 3272 .reg_shift = 2, 3273 .base_baud = 115200, 3274 }, 3275 [pbn_fintek_4] = { 3276 .num_ports = 4, 3277 .uart_offset = 8, 3278 .base_baud = 115200, 3279 .first_offset = 0x40, 3280 }, 3281 [pbn_fintek_8] = { 3282 .num_ports = 8, 3283 .uart_offset = 8, 3284 .base_baud = 115200, 3285 .first_offset = 0x40, 3286 }, 3287 [pbn_fintek_12] = { 3288 .num_ports = 12, 3289 .uart_offset = 8, 3290 .base_baud = 115200, 3291 .first_offset = 0x40, 3292 }, 3293 [pbn_wch382_2] = { 3294 .flags = FL_BASE0, 3295 .num_ports = 2, 3296 .base_baud = 115200, 3297 .uart_offset = 8, 3298 .first_offset = 0xC0, 3299 }, 3300 [pbn_wch384_4] = { 3301 .flags = FL_BASE0, 3302 .num_ports = 4, 3303 .base_baud = 115200, 3304 .uart_offset = 8, 3305 .first_offset = 0xC0, 3306 }, 3307 /* 3308 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART 3309 */ 3310 [pbn_pericom_PI7C9X7951] = { 3311 .flags = FL_BASE0, 3312 .num_ports = 1, 3313 .base_baud = 921600, 3314 .uart_offset = 0x8, 3315 }, 3316 [pbn_pericom_PI7C9X7952] = { 3317 .flags = FL_BASE0, 3318 .num_ports = 2, 3319 .base_baud = 921600, 3320 .uart_offset = 0x8, 3321 }, 3322 [pbn_pericom_PI7C9X7954] = { 3323 .flags = FL_BASE0, 3324 .num_ports = 4, 3325 .base_baud = 921600, 3326 .uart_offset = 0x8, 3327 }, 3328 [pbn_pericom_PI7C9X7958] = { 3329 .flags = FL_BASE0, 3330 .num_ports = 8, 3331 .base_baud = 921600, 3332 .uart_offset = 0x8, 3333 }, 3334 }; 3335 3336 static const struct pci_device_id blacklist[] = { 3337 /* softmodems */ 3338 { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ 3339 { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ 3340 { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ 3341 3342 /* multi-io cards handled by parport_serial */ 3343 { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */ 3344 { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */ 3345 { PCI_DEVICE(0x4348, 0x7173), }, /* WCH CH355 4S */ 3346 { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */ 3347 { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */ 3348 3349 /* Moxa Smartio MUE boards handled by 8250_moxa */ 3350 { PCI_VDEVICE(MOXA, 0x1024), }, 3351 { PCI_VDEVICE(MOXA, 0x1025), }, 3352 { PCI_VDEVICE(MOXA, 0x1045), }, 3353 { PCI_VDEVICE(MOXA, 0x1144), }, 3354 { PCI_VDEVICE(MOXA, 0x1160), }, 3355 { PCI_VDEVICE(MOXA, 0x1161), }, 3356 { PCI_VDEVICE(MOXA, 0x1182), }, 3357 { PCI_VDEVICE(MOXA, 0x1183), }, 3358 { PCI_VDEVICE(MOXA, 0x1322), }, 3359 { PCI_VDEVICE(MOXA, 0x1342), }, 3360 { PCI_VDEVICE(MOXA, 0x1381), }, 3361 { PCI_VDEVICE(MOXA, 0x1683), }, 3362 3363 /* Intel platforms with MID UART */ 3364 { PCI_VDEVICE(INTEL, 0x081b), }, 3365 { PCI_VDEVICE(INTEL, 0x081c), }, 3366 { PCI_VDEVICE(INTEL, 0x081d), }, 3367 { PCI_VDEVICE(INTEL, 0x1191), }, 3368 { PCI_VDEVICE(INTEL, 0x18d8), }, 3369 { PCI_VDEVICE(INTEL, 0x19d8), }, 3370 3371 /* Intel platforms with DesignWare UART */ 3372 { PCI_VDEVICE(INTEL, 0x0936), }, 3373 { PCI_VDEVICE(INTEL, 0x0f0a), }, 3374 { PCI_VDEVICE(INTEL, 0x0f0c), }, 3375 { PCI_VDEVICE(INTEL, 0x228a), }, 3376 { PCI_VDEVICE(INTEL, 0x228c), }, 3377 { PCI_VDEVICE(INTEL, 0x9ce3), }, 3378 { PCI_VDEVICE(INTEL, 0x9ce4), }, 3379 3380 /* Exar devices */ 3381 { PCI_VDEVICE(EXAR, PCI_ANY_ID), }, 3382 { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), }, 3383 }; 3384 3385 static int serial_pci_is_class_communication(struct pci_dev *dev) 3386 { 3387 /* 3388 * If it is not a communications device or the programming 3389 * interface is greater than 6, give up. 3390 * 3391 * (Should we try to make guesses for multiport serial devices 3392 * later?) 3393 */ 3394 if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && 3395 ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || 3396 (dev->class & 0xff) > 6) 3397 return -ENODEV; 3398 3399 return 0; 3400 } 3401 3402 static int serial_pci_is_blacklisted(struct pci_dev *dev) 3403 { 3404 const struct pci_device_id *bldev; 3405 3406 /* 3407 * Do not access blacklisted devices that are known not to 3408 * feature serial ports or are handled by other modules. 3409 */ 3410 for (bldev = blacklist; 3411 bldev < blacklist + ARRAY_SIZE(blacklist); 3412 bldev++) { 3413 if (dev->vendor == bldev->vendor && 3414 dev->device == bldev->device) 3415 return -ENODEV; 3416 } 3417 3418 return 0; 3419 } 3420 3421 /* 3422 * Given a complete unknown PCI device, try to use some heuristics to 3423 * guess what the configuration might be, based on the pitiful PCI 3424 * serial specs. Returns 0 on success, -ENODEV on failure. 3425 */ 3426 static int 3427 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) 3428 { 3429 int num_iomem, num_port, first_port = -1, i; 3430 3431 num_iomem = num_port = 0; 3432 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { 3433 if (pci_resource_flags(dev, i) & IORESOURCE_IO) { 3434 num_port++; 3435 if (first_port == -1) 3436 first_port = i; 3437 } 3438 if (pci_resource_flags(dev, i) & IORESOURCE_MEM) 3439 num_iomem++; 3440 } 3441 3442 /* 3443 * If there is 1 or 0 iomem regions, and exactly one port, 3444 * use it. We guess the number of ports based on the IO 3445 * region size. 3446 */ 3447 if (num_iomem <= 1 && num_port == 1) { 3448 board->flags = first_port; 3449 board->num_ports = pci_resource_len(dev, first_port) / 8; 3450 return 0; 3451 } 3452 3453 /* 3454 * Now guess if we've got a board which indexes by BARs. 3455 * Each IO BAR should be 8 bytes, and they should follow 3456 * consecutively. 3457 */ 3458 first_port = -1; 3459 num_port = 0; 3460 for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { 3461 if (pci_resource_flags(dev, i) & IORESOURCE_IO && 3462 pci_resource_len(dev, i) == 8 && 3463 (first_port == -1 || (first_port + num_port) == i)) { 3464 num_port++; 3465 if (first_port == -1) 3466 first_port = i; 3467 } 3468 } 3469 3470 if (num_port > 1) { 3471 board->flags = first_port | FL_BASE_BARS; 3472 board->num_ports = num_port; 3473 return 0; 3474 } 3475 3476 return -ENODEV; 3477 } 3478 3479 static inline int 3480 serial_pci_matches(const struct pciserial_board *board, 3481 const struct pciserial_board *guessed) 3482 { 3483 return 3484 board->num_ports == guessed->num_ports && 3485 board->base_baud == guessed->base_baud && 3486 board->uart_offset == guessed->uart_offset && 3487 board->reg_shift == guessed->reg_shift && 3488 board->first_offset == guessed->first_offset; 3489 } 3490 3491 struct serial_private * 3492 pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) 3493 { 3494 struct uart_8250_port uart; 3495 struct serial_private *priv; 3496 struct pci_serial_quirk *quirk; 3497 int rc, nr_ports, i; 3498 3499 nr_ports = board->num_ports; 3500 3501 /* 3502 * Find an init and setup quirks. 3503 */ 3504 quirk = find_quirk(dev); 3505 3506 /* 3507 * Run the new-style initialization function. 3508 * The initialization function returns: 3509 * <0 - error 3510 * 0 - use board->num_ports 3511 * >0 - number of ports 3512 */ 3513 if (quirk->init) { 3514 rc = quirk->init(dev); 3515 if (rc < 0) { 3516 priv = ERR_PTR(rc); 3517 goto err_out; 3518 } 3519 if (rc) 3520 nr_ports = rc; 3521 } 3522 3523 priv = kzalloc(sizeof(struct serial_private) + 3524 sizeof(unsigned int) * nr_ports, 3525 GFP_KERNEL); 3526 if (!priv) { 3527 priv = ERR_PTR(-ENOMEM); 3528 goto err_deinit; 3529 } 3530 3531 priv->dev = dev; 3532 priv->quirk = quirk; 3533 3534 memset(&uart, 0, sizeof(uart)); 3535 uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; 3536 uart.port.uartclk = board->base_baud * 16; 3537 uart.port.irq = get_pci_irq(dev, board); 3538 uart.port.dev = &dev->dev; 3539 3540 for (i = 0; i < nr_ports; i++) { 3541 if (quirk->setup(priv, board, &uart, i)) 3542 break; 3543 3544 dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", 3545 uart.port.iobase, uart.port.irq, uart.port.iotype); 3546 3547 priv->line[i] = serial8250_register_8250_port(&uart); 3548 if (priv->line[i] < 0) { 3549 dev_err(&dev->dev, 3550 "Couldn't register serial port %lx, irq %d, type %d, error %d\n", 3551 uart.port.iobase, uart.port.irq, 3552 uart.port.iotype, priv->line[i]); 3553 break; 3554 } 3555 } 3556 priv->nr = i; 3557 priv->board = board; 3558 return priv; 3559 3560 err_deinit: 3561 if (quirk->exit) 3562 quirk->exit(dev); 3563 err_out: 3564 return priv; 3565 } 3566 EXPORT_SYMBOL_GPL(pciserial_init_ports); 3567 3568 static void pciserial_detach_ports(struct serial_private *priv) 3569 { 3570 struct pci_serial_quirk *quirk; 3571 int i; 3572 3573 for (i = 0; i < priv->nr; i++) 3574 serial8250_unregister_port(priv->line[i]); 3575 3576 /* 3577 * Find the exit quirks. 3578 */ 3579 quirk = find_quirk(priv->dev); 3580 if (quirk->exit) 3581 quirk->exit(priv->dev); 3582 } 3583 3584 void pciserial_remove_ports(struct serial_private *priv) 3585 { 3586 pciserial_detach_ports(priv); 3587 kfree(priv); 3588 } 3589 EXPORT_SYMBOL_GPL(pciserial_remove_ports); 3590 3591 void pciserial_suspend_ports(struct serial_private *priv) 3592 { 3593 int i; 3594 3595 for (i = 0; i < priv->nr; i++) 3596 if (priv->line[i] >= 0) 3597 serial8250_suspend_port(priv->line[i]); 3598 3599 /* 3600 * Ensure that every init quirk is properly torn down 3601 */ 3602 if (priv->quirk->exit) 3603 priv->quirk->exit(priv->dev); 3604 } 3605 EXPORT_SYMBOL_GPL(pciserial_suspend_ports); 3606 3607 void pciserial_resume_ports(struct serial_private *priv) 3608 { 3609 int i; 3610 3611 /* 3612 * Ensure that the board is correctly configured. 3613 */ 3614 if (priv->quirk->init) 3615 priv->quirk->init(priv->dev); 3616 3617 for (i = 0; i < priv->nr; i++) 3618 if (priv->line[i] >= 0) 3619 serial8250_resume_port(priv->line[i]); 3620 } 3621 EXPORT_SYMBOL_GPL(pciserial_resume_ports); 3622 3623 /* 3624 * Probe one serial board. Unfortunately, there is no rhyme nor reason 3625 * to the arrangement of serial ports on a PCI card. 3626 */ 3627 static int 3628 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) 3629 { 3630 struct pci_serial_quirk *quirk; 3631 struct serial_private *priv; 3632 const struct pciserial_board *board; 3633 struct pciserial_board tmp; 3634 int rc; 3635 3636 quirk = find_quirk(dev); 3637 if (quirk->probe) { 3638 rc = quirk->probe(dev); 3639 if (rc) 3640 return rc; 3641 } 3642 3643 if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { 3644 dev_err(&dev->dev, "invalid driver_data: %ld\n", 3645 ent->driver_data); 3646 return -EINVAL; 3647 } 3648 3649 board = &pci_boards[ent->driver_data]; 3650 3651 rc = serial_pci_is_class_communication(dev); 3652 if (rc) 3653 return rc; 3654 3655 rc = serial_pci_is_blacklisted(dev); 3656 if (rc) 3657 return rc; 3658 3659 rc = pcim_enable_device(dev); 3660 pci_save_state(dev); 3661 if (rc) 3662 return rc; 3663 3664 if (ent->driver_data == pbn_default) { 3665 /* 3666 * Use a copy of the pci_board entry for this; 3667 * avoid changing entries in the table. 3668 */ 3669 memcpy(&tmp, board, sizeof(struct pciserial_board)); 3670 board = &tmp; 3671 3672 /* 3673 * We matched one of our class entries. Try to 3674 * determine the parameters of this board. 3675 */ 3676 rc = serial_pci_guess_board(dev, &tmp); 3677 if (rc) 3678 return rc; 3679 } else { 3680 /* 3681 * We matched an explicit entry. If we are able to 3682 * detect this boards settings with our heuristic, 3683 * then we no longer need this entry. 3684 */ 3685 memcpy(&tmp, &pci_boards[pbn_default], 3686 sizeof(struct pciserial_board)); 3687 rc = serial_pci_guess_board(dev, &tmp); 3688 if (rc == 0 && serial_pci_matches(board, &tmp)) 3689 moan_device("Redundant entry in serial pci_table.", 3690 dev); 3691 } 3692 3693 priv = pciserial_init_ports(dev, board); 3694 if (IS_ERR(priv)) 3695 return PTR_ERR(priv); 3696 3697 pci_set_drvdata(dev, priv); 3698 return 0; 3699 } 3700 3701 static void pciserial_remove_one(struct pci_dev *dev) 3702 { 3703 struct serial_private *priv = pci_get_drvdata(dev); 3704 3705 pciserial_remove_ports(priv); 3706 } 3707 3708 #ifdef CONFIG_PM_SLEEP 3709 static int pciserial_suspend_one(struct device *dev) 3710 { 3711 struct pci_dev *pdev = to_pci_dev(dev); 3712 struct serial_private *priv = pci_get_drvdata(pdev); 3713 3714 if (priv) 3715 pciserial_suspend_ports(priv); 3716 3717 return 0; 3718 } 3719 3720 static int pciserial_resume_one(struct device *dev) 3721 { 3722 struct pci_dev *pdev = to_pci_dev(dev); 3723 struct serial_private *priv = pci_get_drvdata(pdev); 3724 int err; 3725 3726 if (priv) { 3727 /* 3728 * The device may have been disabled. Re-enable it. 3729 */ 3730 err = pci_enable_device(pdev); 3731 /* FIXME: We cannot simply error out here */ 3732 if (err) 3733 dev_err(dev, "Unable to re-enable ports, trying to continue.\n"); 3734 pciserial_resume_ports(priv); 3735 } 3736 return 0; 3737 } 3738 #endif 3739 3740 static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, 3741 pciserial_resume_one); 3742 3743 static const struct pci_device_id serial_pci_tbl[] = { 3744 /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ 3745 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, 3746 PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, 3747 pbn_b2_8_921600 }, 3748 /* Advantech also use 0x3618 and 0xf618 */ 3749 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618, 3750 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 3751 pbn_b0_4_921600 }, 3752 { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618, 3753 PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0, 3754 pbn_b0_4_921600 }, 3755 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3756 PCI_SUBVENDOR_ID_CONNECT_TECH, 3757 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 3758 pbn_b1_8_1382400 }, 3759 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3760 PCI_SUBVENDOR_ID_CONNECT_TECH, 3761 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 3762 pbn_b1_4_1382400 }, 3763 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, 3764 PCI_SUBVENDOR_ID_CONNECT_TECH, 3765 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 3766 pbn_b1_2_1382400 }, 3767 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3768 PCI_SUBVENDOR_ID_CONNECT_TECH, 3769 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, 3770 pbn_b1_8_1382400 }, 3771 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3772 PCI_SUBVENDOR_ID_CONNECT_TECH, 3773 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, 3774 pbn_b1_4_1382400 }, 3775 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3776 PCI_SUBVENDOR_ID_CONNECT_TECH, 3777 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, 3778 pbn_b1_2_1382400 }, 3779 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3780 PCI_SUBVENDOR_ID_CONNECT_TECH, 3781 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, 3782 pbn_b1_8_921600 }, 3783 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3784 PCI_SUBVENDOR_ID_CONNECT_TECH, 3785 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, 3786 pbn_b1_8_921600 }, 3787 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3788 PCI_SUBVENDOR_ID_CONNECT_TECH, 3789 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, 3790 pbn_b1_4_921600 }, 3791 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3792 PCI_SUBVENDOR_ID_CONNECT_TECH, 3793 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, 3794 pbn_b1_4_921600 }, 3795 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3796 PCI_SUBVENDOR_ID_CONNECT_TECH, 3797 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, 3798 pbn_b1_2_921600 }, 3799 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3800 PCI_SUBVENDOR_ID_CONNECT_TECH, 3801 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, 3802 pbn_b1_8_921600 }, 3803 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3804 PCI_SUBVENDOR_ID_CONNECT_TECH, 3805 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, 3806 pbn_b1_8_921600 }, 3807 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3808 PCI_SUBVENDOR_ID_CONNECT_TECH, 3809 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, 3810 pbn_b1_4_921600 }, 3811 { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, 3812 PCI_SUBVENDOR_ID_CONNECT_TECH, 3813 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, 3814 pbn_b1_2_1250000 }, 3815 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3816 PCI_SUBVENDOR_ID_CONNECT_TECH, 3817 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, 3818 pbn_b0_2_1843200 }, 3819 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3820 PCI_SUBVENDOR_ID_CONNECT_TECH, 3821 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, 3822 pbn_b0_4_1843200 }, 3823 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 3824 PCI_VENDOR_ID_AFAVLAB, 3825 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, 3826 pbn_b0_4_1152000 }, 3827 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, 3828 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3829 pbn_b2_bt_1_115200 }, 3830 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, 3831 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3832 pbn_b2_bt_2_115200 }, 3833 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, 3834 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3835 pbn_b2_bt_4_115200 }, 3836 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, 3837 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3838 pbn_b2_bt_2_115200 }, 3839 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, 3840 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3841 pbn_b2_bt_4_115200 }, 3842 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, 3843 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3844 pbn_b2_8_115200 }, 3845 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, 3846 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3847 pbn_b2_8_460800 }, 3848 { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, 3849 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3850 pbn_b2_8_115200 }, 3851 3852 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, 3853 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3854 pbn_b2_bt_2_115200 }, 3855 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, 3856 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3857 pbn_b2_bt_2_921600 }, 3858 /* 3859 * VScom SPCOM800, from sl@s.pl 3860 */ 3861 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, 3862 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3863 pbn_b2_8_921600 }, 3864 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, 3865 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3866 pbn_b2_4_921600 }, 3867 /* Unknown card - subdevice 0x1584 */ 3868 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3869 PCI_VENDOR_ID_PLX, 3870 PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, 3871 pbn_b2_4_115200 }, 3872 /* Unknown card - subdevice 0x1588 */ 3873 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3874 PCI_VENDOR_ID_PLX, 3875 PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0, 3876 pbn_b2_8_115200 }, 3877 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3878 PCI_SUBVENDOR_ID_KEYSPAN, 3879 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, 3880 pbn_panacom }, 3881 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, 3882 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3883 pbn_panacom4 }, 3884 { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, 3885 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3886 pbn_panacom2 }, 3887 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 3888 PCI_VENDOR_ID_ESDGMBH, 3889 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, 3890 pbn_b2_4_115200 }, 3891 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3892 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3893 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, 3894 pbn_b2_4_460800 }, 3895 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3896 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3897 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, 3898 pbn_b2_8_460800 }, 3899 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3900 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3901 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, 3902 pbn_b2_16_460800 }, 3903 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3904 PCI_SUBVENDOR_ID_CHASE_PCIFAST, 3905 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, 3906 pbn_b2_16_460800 }, 3907 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3908 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 3909 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, 3910 pbn_b2_4_460800 }, 3911 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3912 PCI_SUBVENDOR_ID_CHASE_PCIRAS, 3913 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, 3914 pbn_b2_8_460800 }, 3915 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 3916 PCI_SUBVENDOR_ID_EXSYS, 3917 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, 3918 pbn_b2_4_115200 }, 3919 /* 3920 * Megawolf Romulus PCI Serial Card, from Mike Hudson 3921 * (Exoray@isys.ca) 3922 */ 3923 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, 3924 0x10b5, 0x106a, 0, 0, 3925 pbn_plx_romulus }, 3926 /* 3927 * EndRun Technologies. PCI express device range. 3928 * EndRun PTP/1588 has 2 Native UARTs. 3929 */ 3930 { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, 3931 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3932 pbn_endrun_2_4000000 }, 3933 /* 3934 * Quatech cards. These actually have configurable clocks but for 3935 * now we just use the default. 3936 * 3937 * 100 series are RS232, 200 series RS422, 3938 */ 3939 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, 3940 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3941 pbn_b1_4_115200 }, 3942 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, 3943 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3944 pbn_b1_2_115200 }, 3945 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E, 3946 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3947 pbn_b2_2_115200 }, 3948 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200, 3949 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3950 pbn_b1_2_115200 }, 3951 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E, 3952 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3953 pbn_b2_2_115200 }, 3954 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200, 3955 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3956 pbn_b1_4_115200 }, 3957 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, 3958 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3959 pbn_b1_8_115200 }, 3960 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, 3961 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3962 pbn_b1_8_115200 }, 3963 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100, 3964 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3965 pbn_b1_4_115200 }, 3966 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100, 3967 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3968 pbn_b1_2_115200 }, 3969 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200, 3970 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3971 pbn_b1_4_115200 }, 3972 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200, 3973 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3974 pbn_b1_2_115200 }, 3975 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100, 3976 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3977 pbn_b2_4_115200 }, 3978 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100, 3979 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3980 pbn_b2_2_115200 }, 3981 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100, 3982 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3983 pbn_b2_1_115200 }, 3984 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200, 3985 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3986 pbn_b2_4_115200 }, 3987 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200, 3988 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3989 pbn_b2_2_115200 }, 3990 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200, 3991 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3992 pbn_b2_1_115200 }, 3993 { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100, 3994 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3995 pbn_b0_8_115200 }, 3996 3997 { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, 3998 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 3999 0, 0, 4000 pbn_b0_4_921600 }, 4001 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4002 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 4003 0, 0, 4004 pbn_b0_4_1152000 }, 4005 { PCI_VENDOR_ID_OXSEMI, 0x9505, 4006 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4007 pbn_b0_bt_2_921600 }, 4008 4009 /* 4010 * The below card is a little controversial since it is the 4011 * subject of a PCI vendor/device ID clash. (See 4012 * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). 4013 * For now just used the hex ID 0x950a. 4014 */ 4015 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4016 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00, 4017 0, 0, pbn_b0_2_115200 }, 4018 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4019 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30, 4020 0, 0, pbn_b0_2_115200 }, 4021 { PCI_VENDOR_ID_OXSEMI, 0x950a, 4022 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4023 pbn_b0_2_1130000 }, 4024 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, 4025 PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, 4026 pbn_b0_1_921600 }, 4027 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, 4028 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4029 pbn_b0_4_115200 }, 4030 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, 4031 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4032 pbn_b0_bt_2_921600 }, 4033 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, 4034 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4035 pbn_b2_8_1152000 }, 4036 4037 /* 4038 * Oxford Semiconductor Inc. Tornado PCI express device range. 4039 */ 4040 { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ 4041 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4042 pbn_b0_1_4000000 }, 4043 { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ 4044 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4045 pbn_b0_1_4000000 }, 4046 { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ 4047 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4048 pbn_oxsemi_1_4000000 }, 4049 { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ 4050 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4051 pbn_oxsemi_1_4000000 }, 4052 { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ 4053 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4054 pbn_b0_1_4000000 }, 4055 { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ 4056 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4057 pbn_b0_1_4000000 }, 4058 { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ 4059 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4060 pbn_oxsemi_1_4000000 }, 4061 { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ 4062 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4063 pbn_oxsemi_1_4000000 }, 4064 { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ 4065 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4066 pbn_b0_1_4000000 }, 4067 { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ 4068 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4069 pbn_b0_1_4000000 }, 4070 { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ 4071 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4072 pbn_b0_1_4000000 }, 4073 { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ 4074 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4075 pbn_b0_1_4000000 }, 4076 { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ 4077 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4078 pbn_oxsemi_2_4000000 }, 4079 { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ 4080 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4081 pbn_oxsemi_2_4000000 }, 4082 { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ 4083 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4084 pbn_oxsemi_4_4000000 }, 4085 { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ 4086 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4087 pbn_oxsemi_4_4000000 }, 4088 { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ 4089 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4090 pbn_oxsemi_8_4000000 }, 4091 { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ 4092 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4093 pbn_oxsemi_8_4000000 }, 4094 { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ 4095 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4096 pbn_oxsemi_1_4000000 }, 4097 { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ 4098 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4099 pbn_oxsemi_1_4000000 }, 4100 { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ 4101 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4102 pbn_oxsemi_1_4000000 }, 4103 { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ 4104 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4105 pbn_oxsemi_1_4000000 }, 4106 { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ 4107 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4108 pbn_oxsemi_1_4000000 }, 4109 { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ 4110 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4111 pbn_oxsemi_1_4000000 }, 4112 { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ 4113 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4114 pbn_oxsemi_1_4000000 }, 4115 { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ 4116 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4117 pbn_oxsemi_1_4000000 }, 4118 { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ 4119 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4120 pbn_oxsemi_1_4000000 }, 4121 { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ 4122 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4123 pbn_oxsemi_1_4000000 }, 4124 { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ 4125 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4126 pbn_oxsemi_1_4000000 }, 4127 { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ 4128 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4129 pbn_oxsemi_1_4000000 }, 4130 { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ 4131 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4132 pbn_oxsemi_1_4000000 }, 4133 { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ 4134 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4135 pbn_oxsemi_1_4000000 }, 4136 { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ 4137 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4138 pbn_oxsemi_1_4000000 }, 4139 { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ 4140 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4141 pbn_oxsemi_1_4000000 }, 4142 { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ 4143 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4144 pbn_oxsemi_1_4000000 }, 4145 { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ 4146 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4147 pbn_oxsemi_1_4000000 }, 4148 { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ 4149 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4150 pbn_oxsemi_1_4000000 }, 4151 { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ 4152 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4153 pbn_oxsemi_1_4000000 }, 4154 { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ 4155 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4156 pbn_oxsemi_1_4000000 }, 4157 { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ 4158 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4159 pbn_oxsemi_1_4000000 }, 4160 { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ 4161 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4162 pbn_oxsemi_1_4000000 }, 4163 { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ 4164 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4165 pbn_oxsemi_1_4000000 }, 4166 { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ 4167 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4168 pbn_oxsemi_1_4000000 }, 4169 { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ 4170 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4171 pbn_oxsemi_1_4000000 }, 4172 /* 4173 * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado 4174 */ 4175 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ 4176 PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, 4177 pbn_oxsemi_1_4000000 }, 4178 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ 4179 PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, 4180 pbn_oxsemi_2_4000000 }, 4181 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ 4182 PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, 4183 pbn_oxsemi_4_4000000 }, 4184 { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ 4185 PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, 4186 pbn_oxsemi_8_4000000 }, 4187 4188 /* 4189 * Digi/IBM PCIe 2-port Async EIA-232 Adapter utilizing OxSemi Tornado 4190 */ 4191 { PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_2_OX_IBM, 4192 PCI_SUBVENDOR_ID_IBM, PCI_ANY_ID, 0, 0, 4193 pbn_oxsemi_2_4000000 }, 4194 4195 /* 4196 * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, 4197 * from skokodyn@yahoo.com 4198 */ 4199 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4200 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, 4201 pbn_sbsxrsio }, 4202 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4203 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, 4204 pbn_sbsxrsio }, 4205 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4206 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, 4207 pbn_sbsxrsio }, 4208 { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, 4209 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, 4210 pbn_sbsxrsio }, 4211 4212 /* 4213 * Digitan DS560-558, from jimd@esoft.com 4214 */ 4215 { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, 4216 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4217 pbn_b1_1_115200 }, 4218 4219 /* 4220 * Titan Electronic cards 4221 * The 400L and 800L have a custom setup quirk. 4222 */ 4223 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, 4224 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4225 pbn_b0_1_921600 }, 4226 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, 4227 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4228 pbn_b0_2_921600 }, 4229 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, 4230 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4231 pbn_b0_4_921600 }, 4232 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, 4233 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4234 pbn_b0_4_921600 }, 4235 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, 4236 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4237 pbn_b1_1_921600 }, 4238 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, 4239 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4240 pbn_b1_bt_2_921600 }, 4241 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, 4242 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4243 pbn_b0_bt_4_921600 }, 4244 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, 4245 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4246 pbn_b0_bt_8_921600 }, 4247 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, 4248 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4249 pbn_b4_bt_2_921600 }, 4250 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, 4251 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4252 pbn_b4_bt_4_921600 }, 4253 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, 4254 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4255 pbn_b4_bt_8_921600 }, 4256 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, 4257 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4258 pbn_b0_4_921600 }, 4259 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, 4260 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4261 pbn_b0_4_921600 }, 4262 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, 4263 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4264 pbn_b0_4_921600 }, 4265 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, 4266 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4267 pbn_oxsemi_1_4000000 }, 4268 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, 4269 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4270 pbn_oxsemi_2_4000000 }, 4271 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, 4272 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4273 pbn_oxsemi_4_4000000 }, 4274 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, 4275 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4276 pbn_oxsemi_8_4000000 }, 4277 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, 4278 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4279 pbn_oxsemi_2_4000000 }, 4280 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, 4281 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4282 pbn_oxsemi_2_4000000 }, 4283 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, 4284 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4285 pbn_b0_bt_2_921600 }, 4286 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, 4287 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4288 pbn_b0_4_921600 }, 4289 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, 4290 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4291 pbn_b0_4_921600 }, 4292 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, 4293 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4294 pbn_b0_4_921600 }, 4295 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, 4296 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4297 pbn_b0_4_921600 }, 4298 4299 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, 4300 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4301 pbn_b2_1_460800 }, 4302 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, 4303 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4304 pbn_b2_1_460800 }, 4305 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, 4306 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4307 pbn_b2_1_460800 }, 4308 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, 4309 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4310 pbn_b2_bt_2_921600 }, 4311 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, 4312 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4313 pbn_b2_bt_2_921600 }, 4314 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, 4315 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4316 pbn_b2_bt_2_921600 }, 4317 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, 4318 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4319 pbn_b2_bt_4_921600 }, 4320 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, 4321 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4322 pbn_b2_bt_4_921600 }, 4323 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, 4324 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4325 pbn_b2_bt_4_921600 }, 4326 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, 4327 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4328 pbn_b0_1_921600 }, 4329 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, 4330 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4331 pbn_b0_1_921600 }, 4332 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, 4333 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4334 pbn_b0_1_921600 }, 4335 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, 4336 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4337 pbn_b0_bt_2_921600 }, 4338 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, 4339 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4340 pbn_b0_bt_2_921600 }, 4341 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, 4342 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4343 pbn_b0_bt_2_921600 }, 4344 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, 4345 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4346 pbn_b0_bt_4_921600 }, 4347 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, 4348 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4349 pbn_b0_bt_4_921600 }, 4350 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, 4351 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4352 pbn_b0_bt_4_921600 }, 4353 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, 4354 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4355 pbn_b0_bt_8_921600 }, 4356 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, 4357 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4358 pbn_b0_bt_8_921600 }, 4359 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, 4360 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4361 pbn_b0_bt_8_921600 }, 4362 4363 /* 4364 * Computone devices submitted by Doug McNash dmcnash@computone.com 4365 */ 4366 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4367 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, 4368 0, 0, pbn_computone_4 }, 4369 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4370 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, 4371 0, 0, pbn_computone_8 }, 4372 { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, 4373 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, 4374 0, 0, pbn_computone_6 }, 4375 4376 { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, 4377 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4378 pbn_oxsemi }, 4379 { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, 4380 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, 4381 pbn_b0_bt_1_921600 }, 4382 4383 /* 4384 * SUNIX (TIMEDIA) 4385 */ 4386 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4387 PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, 4388 PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, 4389 pbn_b0_bt_1_921600 }, 4390 4391 { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, 4392 PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, 4393 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, 4394 pbn_b0_bt_1_921600 }, 4395 4396 /* 4397 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> 4398 */ 4399 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, 4400 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4401 pbn_b0_bt_8_115200 }, 4402 { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, 4403 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4404 pbn_b0_bt_8_115200 }, 4405 4406 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, 4407 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4408 pbn_b0_bt_2_115200 }, 4409 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, 4410 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4411 pbn_b0_bt_2_115200 }, 4412 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, 4413 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4414 pbn_b0_bt_2_115200 }, 4415 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, 4416 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4417 pbn_b0_bt_2_115200 }, 4418 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, 4419 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4420 pbn_b0_bt_2_115200 }, 4421 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, 4422 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4423 pbn_b0_bt_4_460800 }, 4424 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, 4425 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4426 pbn_b0_bt_4_460800 }, 4427 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, 4428 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4429 pbn_b0_bt_2_460800 }, 4430 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, 4431 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4432 pbn_b0_bt_2_460800 }, 4433 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, 4434 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4435 pbn_b0_bt_2_460800 }, 4436 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, 4437 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4438 pbn_b0_bt_1_115200 }, 4439 { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, 4440 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4441 pbn_b0_bt_1_460800 }, 4442 4443 /* 4444 * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). 4445 * Cards are identified by their subsystem vendor IDs, which 4446 * (in hex) match the model number. 4447 * 4448 * Note that JC140x are RS422/485 cards which require ox950 4449 * ACR = 0x10, and as such are not currently fully supported. 4450 */ 4451 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4452 0x1204, 0x0004, 0, 0, 4453 pbn_b0_4_921600 }, 4454 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4455 0x1208, 0x0004, 0, 0, 4456 pbn_b0_4_921600 }, 4457 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4458 0x1402, 0x0002, 0, 0, 4459 pbn_b0_2_921600 }, */ 4460 /* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, 4461 0x1404, 0x0004, 0, 0, 4462 pbn_b0_4_921600 }, */ 4463 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, 4464 0x1208, 0x0004, 0, 0, 4465 pbn_b0_4_921600 }, 4466 4467 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4468 0x1204, 0x0004, 0, 0, 4469 pbn_b0_4_921600 }, 4470 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, 4471 0x1208, 0x0004, 0, 0, 4472 pbn_b0_4_921600 }, 4473 { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, 4474 0x1208, 0x0004, 0, 0, 4475 pbn_b0_4_921600 }, 4476 /* 4477 * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com 4478 */ 4479 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, 4480 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4481 pbn_b1_1_1382400 }, 4482 4483 /* 4484 * Dell Remote Access Card III - Tim_T_Murphy@Dell.com 4485 */ 4486 { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, 4487 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4488 pbn_b1_1_1382400 }, 4489 4490 /* 4491 * RAStel 2 port modem, gerg@moreton.com.au 4492 */ 4493 { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, 4494 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4495 pbn_b2_bt_2_115200 }, 4496 4497 /* 4498 * EKF addition for i960 Boards form EKF with serial port 4499 */ 4500 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, 4501 0xE4BF, PCI_ANY_ID, 0, 0, 4502 pbn_intel_i960 }, 4503 4504 /* 4505 * Xircom Cardbus/Ethernet combos 4506 */ 4507 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, 4508 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4509 pbn_b0_1_115200 }, 4510 /* 4511 * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) 4512 */ 4513 { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, 4514 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4515 pbn_b0_1_115200 }, 4516 4517 /* 4518 * Untested PCI modems, sent in from various folks... 4519 */ 4520 4521 /* 4522 * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> 4523 */ 4524 { PCI_VENDOR_ID_ROCKWELL, 0x1004, 4525 0x1048, 0x1500, 0, 0, 4526 pbn_b1_1_115200 }, 4527 4528 { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, 4529 0xFF00, 0, 0, 0, 4530 pbn_sgi_ioc3 }, 4531 4532 /* 4533 * HP Diva card 4534 */ 4535 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 4536 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, 4537 pbn_b1_1_115200 }, 4538 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, 4539 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4540 pbn_b0_5_115200 }, 4541 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, 4542 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4543 pbn_b2_1_115200 }, 4544 4545 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, 4546 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4547 pbn_b3_2_115200 }, 4548 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, 4549 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4550 pbn_b3_4_115200 }, 4551 { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, 4552 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4553 pbn_b3_8_115200 }, 4554 /* 4555 * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART 4556 */ 4557 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951, 4558 PCI_ANY_ID, PCI_ANY_ID, 4559 0, 4560 0, pbn_pericom_PI7C9X7951 }, 4561 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952, 4562 PCI_ANY_ID, PCI_ANY_ID, 4563 0, 4564 0, pbn_pericom_PI7C9X7952 }, 4565 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954, 4566 PCI_ANY_ID, PCI_ANY_ID, 4567 0, 4568 0, pbn_pericom_PI7C9X7954 }, 4569 { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958, 4570 PCI_ANY_ID, PCI_ANY_ID, 4571 0, 4572 0, pbn_pericom_PI7C9X7958 }, 4573 /* 4574 * ACCES I/O Products quad 4575 */ 4576 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB, 4577 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4578 pbn_pericom_PI7C9X7954 }, 4579 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S, 4580 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4581 pbn_pericom_PI7C9X7954 }, 4582 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, 4583 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4584 pbn_pericom_PI7C9X7954 }, 4585 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, 4586 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4587 pbn_pericom_PI7C9X7954 }, 4588 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB, 4589 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4590 pbn_pericom_PI7C9X7954 }, 4591 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2, 4592 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4593 pbn_pericom_PI7C9X7954 }, 4594 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, 4595 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4596 pbn_pericom_PI7C9X7954 }, 4597 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, 4598 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4599 pbn_pericom_PI7C9X7954 }, 4600 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB, 4601 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4602 pbn_pericom_PI7C9X7954 }, 4603 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM, 4604 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4605 pbn_pericom_PI7C9X7954 }, 4606 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, 4607 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4608 pbn_pericom_PI7C9X7954 }, 4609 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, 4610 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4611 pbn_pericom_PI7C9X7954 }, 4612 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1, 4613 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4614 pbn_pericom_PI7C9X7954 }, 4615 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2, 4616 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4617 pbn_pericom_PI7C9X7954 }, 4618 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2, 4619 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4620 pbn_pericom_PI7C9X7954 }, 4621 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, 4622 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4623 pbn_pericom_PI7C9X7954 }, 4624 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, 4625 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4626 pbn_pericom_PI7C9X7954 }, 4627 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S, 4628 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4629 pbn_pericom_PI7C9X7954 }, 4630 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, 4631 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4632 pbn_pericom_PI7C9X7954 }, 4633 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2, 4634 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4635 pbn_pericom_PI7C9X7954 }, 4636 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2, 4637 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4638 pbn_pericom_PI7C9X7954 }, 4639 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, 4640 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4641 pbn_pericom_PI7C9X7954 }, 4642 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, 4643 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4644 pbn_pericom_PI7C9X7954 }, 4645 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM, 4646 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4647 pbn_pericom_PI7C9X7954 }, 4648 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, 4649 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4650 pbn_pericom_PI7C9X7958 }, 4651 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, 4652 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4653 pbn_pericom_PI7C9X7958 }, 4654 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8, 4655 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4656 pbn_pericom_PI7C9X7958 }, 4657 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8, 4658 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4659 pbn_pericom_PI7C9X7958 }, 4660 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, 4661 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4662 pbn_pericom_PI7C9X7958 }, 4663 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8, 4664 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4665 pbn_pericom_PI7C9X7958 }, 4666 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, 4667 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4668 pbn_pericom_PI7C9X7958 }, 4669 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM, 4670 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4671 pbn_pericom_PI7C9X7958 }, 4672 { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, 4673 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4674 pbn_pericom_PI7C9X7958 }, 4675 /* 4676 * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) 4677 */ 4678 { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, 4679 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4680 pbn_b0_1_115200 }, 4681 /* 4682 * ITE 4683 */ 4684 { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, 4685 PCI_ANY_ID, PCI_ANY_ID, 4686 0, 0, 4687 pbn_b1_bt_1_115200 }, 4688 4689 /* 4690 * IntaShield IS-200 4691 */ 4692 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, 4693 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ 4694 pbn_b2_2_115200 }, 4695 /* 4696 * IntaShield IS-400 4697 */ 4698 { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, 4699 PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ 4700 pbn_b2_4_115200 }, 4701 /* 4702 * Perle PCI-RAS cards 4703 */ 4704 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 4705 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, 4706 0, 0, pbn_b2_4_921600 }, 4707 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, 4708 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, 4709 0, 0, pbn_b2_8_921600 }, 4710 4711 /* 4712 * Mainpine series cards: Fairly standard layout but fools 4713 * parts of the autodetect in some cases and uses otherwise 4714 * unmatched communications subclasses in the PCI Express case 4715 */ 4716 4717 { /* RockForceDUO */ 4718 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4719 PCI_VENDOR_ID_MAINPINE, 0x0200, 4720 0, 0, pbn_b0_2_115200 }, 4721 { /* RockForceQUATRO */ 4722 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4723 PCI_VENDOR_ID_MAINPINE, 0x0300, 4724 0, 0, pbn_b0_4_115200 }, 4725 { /* RockForceDUO+ */ 4726 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4727 PCI_VENDOR_ID_MAINPINE, 0x0400, 4728 0, 0, pbn_b0_2_115200 }, 4729 { /* RockForceQUATRO+ */ 4730 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4731 PCI_VENDOR_ID_MAINPINE, 0x0500, 4732 0, 0, pbn_b0_4_115200 }, 4733 { /* RockForce+ */ 4734 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4735 PCI_VENDOR_ID_MAINPINE, 0x0600, 4736 0, 0, pbn_b0_2_115200 }, 4737 { /* RockForce+ */ 4738 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4739 PCI_VENDOR_ID_MAINPINE, 0x0700, 4740 0, 0, pbn_b0_4_115200 }, 4741 { /* RockForceOCTO+ */ 4742 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4743 PCI_VENDOR_ID_MAINPINE, 0x0800, 4744 0, 0, pbn_b0_8_115200 }, 4745 { /* RockForceDUO+ */ 4746 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4747 PCI_VENDOR_ID_MAINPINE, 0x0C00, 4748 0, 0, pbn_b0_2_115200 }, 4749 { /* RockForceQUARTRO+ */ 4750 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4751 PCI_VENDOR_ID_MAINPINE, 0x0D00, 4752 0, 0, pbn_b0_4_115200 }, 4753 { /* RockForceOCTO+ */ 4754 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4755 PCI_VENDOR_ID_MAINPINE, 0x1D00, 4756 0, 0, pbn_b0_8_115200 }, 4757 { /* RockForceD1 */ 4758 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4759 PCI_VENDOR_ID_MAINPINE, 0x2000, 4760 0, 0, pbn_b0_1_115200 }, 4761 { /* RockForceF1 */ 4762 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4763 PCI_VENDOR_ID_MAINPINE, 0x2100, 4764 0, 0, pbn_b0_1_115200 }, 4765 { /* RockForceD2 */ 4766 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4767 PCI_VENDOR_ID_MAINPINE, 0x2200, 4768 0, 0, pbn_b0_2_115200 }, 4769 { /* RockForceF2 */ 4770 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4771 PCI_VENDOR_ID_MAINPINE, 0x2300, 4772 0, 0, pbn_b0_2_115200 }, 4773 { /* RockForceD4 */ 4774 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4775 PCI_VENDOR_ID_MAINPINE, 0x2400, 4776 0, 0, pbn_b0_4_115200 }, 4777 { /* RockForceF4 */ 4778 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4779 PCI_VENDOR_ID_MAINPINE, 0x2500, 4780 0, 0, pbn_b0_4_115200 }, 4781 { /* RockForceD8 */ 4782 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4783 PCI_VENDOR_ID_MAINPINE, 0x2600, 4784 0, 0, pbn_b0_8_115200 }, 4785 { /* RockForceF8 */ 4786 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4787 PCI_VENDOR_ID_MAINPINE, 0x2700, 4788 0, 0, pbn_b0_8_115200 }, 4789 { /* IQ Express D1 */ 4790 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4791 PCI_VENDOR_ID_MAINPINE, 0x3000, 4792 0, 0, pbn_b0_1_115200 }, 4793 { /* IQ Express F1 */ 4794 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4795 PCI_VENDOR_ID_MAINPINE, 0x3100, 4796 0, 0, pbn_b0_1_115200 }, 4797 { /* IQ Express D2 */ 4798 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4799 PCI_VENDOR_ID_MAINPINE, 0x3200, 4800 0, 0, pbn_b0_2_115200 }, 4801 { /* IQ Express F2 */ 4802 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4803 PCI_VENDOR_ID_MAINPINE, 0x3300, 4804 0, 0, pbn_b0_2_115200 }, 4805 { /* IQ Express D4 */ 4806 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4807 PCI_VENDOR_ID_MAINPINE, 0x3400, 4808 0, 0, pbn_b0_4_115200 }, 4809 { /* IQ Express F4 */ 4810 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4811 PCI_VENDOR_ID_MAINPINE, 0x3500, 4812 0, 0, pbn_b0_4_115200 }, 4813 { /* IQ Express D8 */ 4814 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4815 PCI_VENDOR_ID_MAINPINE, 0x3C00, 4816 0, 0, pbn_b0_8_115200 }, 4817 { /* IQ Express F8 */ 4818 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, 4819 PCI_VENDOR_ID_MAINPINE, 0x3D00, 4820 0, 0, pbn_b0_8_115200 }, 4821 4822 4823 /* 4824 * PA Semi PA6T-1682M on-chip UART 4825 */ 4826 { PCI_VENDOR_ID_PASEMI, 0xa004, 4827 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4828 pbn_pasemi_1682M }, 4829 4830 /* 4831 * National Instruments 4832 */ 4833 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, 4834 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4835 pbn_b1_16_115200 }, 4836 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, 4837 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4838 pbn_b1_8_115200 }, 4839 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, 4840 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4841 pbn_b1_bt_4_115200 }, 4842 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, 4843 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4844 pbn_b1_bt_2_115200 }, 4845 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, 4846 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4847 pbn_b1_bt_4_115200 }, 4848 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, 4849 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4850 pbn_b1_bt_2_115200 }, 4851 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, 4852 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4853 pbn_b1_16_115200 }, 4854 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, 4855 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4856 pbn_b1_8_115200 }, 4857 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, 4858 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4859 pbn_b1_bt_4_115200 }, 4860 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, 4861 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4862 pbn_b1_bt_2_115200 }, 4863 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, 4864 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4865 pbn_b1_bt_4_115200 }, 4866 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, 4867 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4868 pbn_b1_bt_2_115200 }, 4869 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, 4870 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4871 pbn_ni8430_2 }, 4872 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, 4873 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4874 pbn_ni8430_2 }, 4875 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, 4876 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4877 pbn_ni8430_4 }, 4878 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, 4879 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4880 pbn_ni8430_4 }, 4881 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, 4882 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4883 pbn_ni8430_8 }, 4884 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, 4885 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4886 pbn_ni8430_8 }, 4887 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, 4888 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4889 pbn_ni8430_16 }, 4890 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, 4891 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4892 pbn_ni8430_16 }, 4893 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, 4894 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4895 pbn_ni8430_2 }, 4896 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, 4897 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4898 pbn_ni8430_2 }, 4899 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, 4900 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4901 pbn_ni8430_4 }, 4902 { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, 4903 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4904 pbn_ni8430_4 }, 4905 4906 /* 4907 * ADDI-DATA GmbH communication cards <info@addi-data.com> 4908 */ 4909 { PCI_VENDOR_ID_ADDIDATA, 4910 PCI_DEVICE_ID_ADDIDATA_APCI7500, 4911 PCI_ANY_ID, 4912 PCI_ANY_ID, 4913 0, 4914 0, 4915 pbn_b0_4_115200 }, 4916 4917 { PCI_VENDOR_ID_ADDIDATA, 4918 PCI_DEVICE_ID_ADDIDATA_APCI7420, 4919 PCI_ANY_ID, 4920 PCI_ANY_ID, 4921 0, 4922 0, 4923 pbn_b0_2_115200 }, 4924 4925 { PCI_VENDOR_ID_ADDIDATA, 4926 PCI_DEVICE_ID_ADDIDATA_APCI7300, 4927 PCI_ANY_ID, 4928 PCI_ANY_ID, 4929 0, 4930 0, 4931 pbn_b0_1_115200 }, 4932 4933 { PCI_VENDOR_ID_AMCC, 4934 PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800, 4935 PCI_ANY_ID, 4936 PCI_ANY_ID, 4937 0, 4938 0, 4939 pbn_b1_8_115200 }, 4940 4941 { PCI_VENDOR_ID_ADDIDATA, 4942 PCI_DEVICE_ID_ADDIDATA_APCI7500_2, 4943 PCI_ANY_ID, 4944 PCI_ANY_ID, 4945 0, 4946 0, 4947 pbn_b0_4_115200 }, 4948 4949 { PCI_VENDOR_ID_ADDIDATA, 4950 PCI_DEVICE_ID_ADDIDATA_APCI7420_2, 4951 PCI_ANY_ID, 4952 PCI_ANY_ID, 4953 0, 4954 0, 4955 pbn_b0_2_115200 }, 4956 4957 { PCI_VENDOR_ID_ADDIDATA, 4958 PCI_DEVICE_ID_ADDIDATA_APCI7300_2, 4959 PCI_ANY_ID, 4960 PCI_ANY_ID, 4961 0, 4962 0, 4963 pbn_b0_1_115200 }, 4964 4965 { PCI_VENDOR_ID_ADDIDATA, 4966 PCI_DEVICE_ID_ADDIDATA_APCI7500_3, 4967 PCI_ANY_ID, 4968 PCI_ANY_ID, 4969 0, 4970 0, 4971 pbn_b0_4_115200 }, 4972 4973 { PCI_VENDOR_ID_ADDIDATA, 4974 PCI_DEVICE_ID_ADDIDATA_APCI7420_3, 4975 PCI_ANY_ID, 4976 PCI_ANY_ID, 4977 0, 4978 0, 4979 pbn_b0_2_115200 }, 4980 4981 { PCI_VENDOR_ID_ADDIDATA, 4982 PCI_DEVICE_ID_ADDIDATA_APCI7300_3, 4983 PCI_ANY_ID, 4984 PCI_ANY_ID, 4985 0, 4986 0, 4987 pbn_b0_1_115200 }, 4988 4989 { PCI_VENDOR_ID_ADDIDATA, 4990 PCI_DEVICE_ID_ADDIDATA_APCI7800_3, 4991 PCI_ANY_ID, 4992 PCI_ANY_ID, 4993 0, 4994 0, 4995 pbn_b0_8_115200 }, 4996 4997 { PCI_VENDOR_ID_ADDIDATA, 4998 PCI_DEVICE_ID_ADDIDATA_APCIe7500, 4999 PCI_ANY_ID, 5000 PCI_ANY_ID, 5001 0, 5002 0, 5003 pbn_ADDIDATA_PCIe_4_3906250 }, 5004 5005 { PCI_VENDOR_ID_ADDIDATA, 5006 PCI_DEVICE_ID_ADDIDATA_APCIe7420, 5007 PCI_ANY_ID, 5008 PCI_ANY_ID, 5009 0, 5010 0, 5011 pbn_ADDIDATA_PCIe_2_3906250 }, 5012 5013 { PCI_VENDOR_ID_ADDIDATA, 5014 PCI_DEVICE_ID_ADDIDATA_APCIe7300, 5015 PCI_ANY_ID, 5016 PCI_ANY_ID, 5017 0, 5018 0, 5019 pbn_ADDIDATA_PCIe_1_3906250 }, 5020 5021 { PCI_VENDOR_ID_ADDIDATA, 5022 PCI_DEVICE_ID_ADDIDATA_APCIe7800, 5023 PCI_ANY_ID, 5024 PCI_ANY_ID, 5025 0, 5026 0, 5027 pbn_ADDIDATA_PCIe_8_3906250 }, 5028 5029 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, 5030 PCI_VENDOR_ID_IBM, 0x0299, 5031 0, 0, pbn_b0_bt_2_115200 }, 5032 5033 /* 5034 * other NetMos 9835 devices are most likely handled by the 5035 * parport_serial driver, check drivers/parport/parport_serial.c 5036 * before adding them here. 5037 */ 5038 5039 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 5040 0xA000, 0x1000, 5041 0, 0, pbn_b0_1_115200 }, 5042 5043 /* the 9901 is a rebranded 9912 */ 5044 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912, 5045 0xA000, 0x1000, 5046 0, 0, pbn_b0_1_115200 }, 5047 5048 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, 5049 0xA000, 0x1000, 5050 0, 0, pbn_b0_1_115200 }, 5051 5052 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9904, 5053 0xA000, 0x1000, 5054 0, 0, pbn_b0_1_115200 }, 5055 5056 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5057 0xA000, 0x1000, 5058 0, 0, pbn_b0_1_115200 }, 5059 5060 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 5061 0xA000, 0x3002, 5062 0, 0, pbn_NETMOS9900_2s_115200 }, 5063 5064 /* 5065 * Best Connectivity and Rosewill PCI Multi I/O cards 5066 */ 5067 5068 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5069 0xA000, 0x1000, 5070 0, 0, pbn_b0_1_115200 }, 5071 5072 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5073 0xA000, 0x3002, 5074 0, 0, pbn_b0_bt_2_115200 }, 5075 5076 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 5077 0xA000, 0x3004, 5078 0, 0, pbn_b0_bt_4_115200 }, 5079 /* Intel CE4100 */ 5080 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, 5081 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5082 pbn_ce4100_1_115200 }, 5083 5084 /* 5085 * Cronyx Omega PCI 5086 */ 5087 { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, 5088 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5089 pbn_omegapci }, 5090 5091 /* 5092 * Broadcom TruManage 5093 */ 5094 { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE, 5095 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5096 pbn_brcm_trumanage }, 5097 5098 /* 5099 * AgeStar as-prs2-009 5100 */ 5101 { PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375, 5102 PCI_ANY_ID, PCI_ANY_ID, 5103 0, 0, pbn_b0_bt_2_115200 }, 5104 5105 /* 5106 * WCH CH353 series devices: The 2S1P is handled by parport_serial 5107 * so not listed here. 5108 */ 5109 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_4S, 5110 PCI_ANY_ID, PCI_ANY_ID, 5111 0, 0, pbn_b0_bt_4_115200 }, 5112 5113 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH353_2S1PF, 5114 PCI_ANY_ID, PCI_ANY_ID, 5115 0, 0, pbn_b0_bt_2_115200 }, 5116 5117 { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH355_4S, 5118 PCI_ANY_ID, PCI_ANY_ID, 5119 0, 0, pbn_b0_bt_4_115200 }, 5120 5121 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, 5122 PCI_ANY_ID, PCI_ANY_ID, 5123 0, 0, pbn_wch382_2 }, 5124 5125 { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, 5126 PCI_ANY_ID, PCI_ANY_ID, 5127 0, 0, pbn_wch384_4 }, 5128 5129 /* Fintek PCI serial cards */ 5130 { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 }, 5131 { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 }, 5132 { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 }, 5133 5134 /* MKS Tenta SCOM-080x serial cards */ 5135 { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, 5136 { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, 5137 5138 /* 5139 * These entries match devices with class COMMUNICATION_SERIAL, 5140 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL 5141 */ 5142 { PCI_ANY_ID, PCI_ANY_ID, 5143 PCI_ANY_ID, PCI_ANY_ID, 5144 PCI_CLASS_COMMUNICATION_SERIAL << 8, 5145 0xffff00, pbn_default }, 5146 { PCI_ANY_ID, PCI_ANY_ID, 5147 PCI_ANY_ID, PCI_ANY_ID, 5148 PCI_CLASS_COMMUNICATION_MODEM << 8, 5149 0xffff00, pbn_default }, 5150 { PCI_ANY_ID, PCI_ANY_ID, 5151 PCI_ANY_ID, PCI_ANY_ID, 5152 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 5153 0xffff00, pbn_default }, 5154 { 0, } 5155 }; 5156 5157 static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev, 5158 pci_channel_state_t state) 5159 { 5160 struct serial_private *priv = pci_get_drvdata(dev); 5161 5162 if (state == pci_channel_io_perm_failure) 5163 return PCI_ERS_RESULT_DISCONNECT; 5164 5165 if (priv) 5166 pciserial_detach_ports(priv); 5167 5168 pci_disable_device(dev); 5169 5170 return PCI_ERS_RESULT_NEED_RESET; 5171 } 5172 5173 static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) 5174 { 5175 int rc; 5176 5177 rc = pci_enable_device(dev); 5178 5179 if (rc) 5180 return PCI_ERS_RESULT_DISCONNECT; 5181 5182 pci_restore_state(dev); 5183 pci_save_state(dev); 5184 5185 return PCI_ERS_RESULT_RECOVERED; 5186 } 5187 5188 static void serial8250_io_resume(struct pci_dev *dev) 5189 { 5190 struct serial_private *priv = pci_get_drvdata(dev); 5191 struct serial_private *new; 5192 5193 if (!priv) 5194 return; 5195 5196 new = pciserial_init_ports(dev, priv->board); 5197 if (!IS_ERR(new)) { 5198 pci_set_drvdata(dev, new); 5199 kfree(priv); 5200 } 5201 } 5202 5203 static const struct pci_error_handlers serial8250_err_handler = { 5204 .error_detected = serial8250_io_error_detected, 5205 .slot_reset = serial8250_io_slot_reset, 5206 .resume = serial8250_io_resume, 5207 }; 5208 5209 static struct pci_driver serial_pci_driver = { 5210 .name = "serial", 5211 .probe = pciserial_init_one, 5212 .remove = pciserial_remove_one, 5213 .driver = { 5214 .pm = &pciserial_pm_ops, 5215 }, 5216 .id_table = serial_pci_tbl, 5217 .err_handler = &serial8250_err_handler, 5218 }; 5219 5220 module_pci_driver(serial_pci_driver); 5221 5222 MODULE_LICENSE("GPL"); 5223 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); 5224 MODULE_DEVICE_TABLE(pci, serial_pci_tbl); 5225