1 /* 2 * Driver for 8250/16550-type serial ports 3 * 4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. 5 * 6 * Copyright (C) 2001 Russell King. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 */ 13 14 #include <linux/serial_8250.h> 15 #include <linux/serial_reg.h> 16 #include <linux/dmaengine.h> 17 18 struct uart_8250_dma { 19 dma_filter_fn fn; 20 void *rx_param; 21 void *tx_param; 22 23 int rx_chan_id; 24 int tx_chan_id; 25 26 struct dma_slave_config rxconf; 27 struct dma_slave_config txconf; 28 29 struct dma_chan *rxchan; 30 struct dma_chan *txchan; 31 32 dma_addr_t rx_addr; 33 dma_addr_t tx_addr; 34 35 dma_cookie_t rx_cookie; 36 dma_cookie_t tx_cookie; 37 38 void *rx_buf; 39 40 size_t rx_size; 41 size_t tx_size; 42 43 unsigned char tx_running:1; 44 }; 45 46 struct old_serial_port { 47 unsigned int uart; 48 unsigned int baud_base; 49 unsigned int port; 50 unsigned int irq; 51 unsigned int flags; 52 unsigned char hub6; 53 unsigned char io_type; 54 unsigned char *iomem_base; 55 unsigned short iomem_reg_shift; 56 unsigned long irqflags; 57 }; 58 59 struct serial8250_config { 60 const char *name; 61 unsigned short fifo_size; 62 unsigned short tx_loadsz; 63 unsigned char fcr; 64 unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; 65 unsigned int flags; 66 }; 67 68 #define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ 69 #define UART_CAP_EFR (1 << 9) /* UART has EFR */ 70 #define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ 71 #define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ 72 #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ 73 #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ 74 #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ 75 76 #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ 77 #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ 78 #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ 79 #define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ 80 #define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ 81 82 #define PROBE_RSA (1 << 0) 83 #define PROBE_ANY (~0) 84 85 #define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) 86 87 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ 88 #define SERIAL8250_SHARE_IRQS 1 89 #else 90 #define SERIAL8250_SHARE_IRQS 0 91 #endif 92 93 static inline int serial_in(struct uart_8250_port *up, int offset) 94 { 95 return up->port.serial_in(&up->port, offset); 96 } 97 98 static inline void serial_out(struct uart_8250_port *up, int offset, int value) 99 { 100 up->port.serial_out(&up->port, offset, value); 101 } 102 103 void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); 104 105 static inline int serial_dl_read(struct uart_8250_port *up) 106 { 107 return up->dl_read(up); 108 } 109 110 static inline void serial_dl_write(struct uart_8250_port *up, int value) 111 { 112 up->dl_write(up, value); 113 } 114 115 #if defined(__alpha__) && !defined(CONFIG_PCI) 116 /* 117 * Digital did something really horribly wrong with the OUT1 and OUT2 118 * lines on at least some ALPHA's. The failure mode is that if either 119 * is cleared, the machine locks up with endless interrupts. 120 */ 121 #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) 122 #else 123 #define ALPHA_KLUDGE_MCR 0 124 #endif 125 126 #ifdef CONFIG_SERIAL_8250_PNP 127 int serial8250_pnp_init(void); 128 void serial8250_pnp_exit(void); 129 #else 130 static inline int serial8250_pnp_init(void) { return 0; } 131 static inline void serial8250_pnp_exit(void) { } 132 #endif 133 134 #ifdef CONFIG_ARCH_OMAP1 135 static inline int is_omap1_8250(struct uart_8250_port *pt) 136 { 137 int res; 138 139 switch (pt->port.mapbase) { 140 case OMAP1_UART1_BASE: 141 case OMAP1_UART2_BASE: 142 case OMAP1_UART3_BASE: 143 res = 1; 144 break; 145 default: 146 res = 0; 147 break; 148 } 149 150 return res; 151 } 152 153 static inline int is_omap1510_8250(struct uart_8250_port *pt) 154 { 155 if (!cpu_is_omap1510()) 156 return 0; 157 158 return is_omap1_8250(pt); 159 } 160 #else 161 static inline int is_omap1_8250(struct uart_8250_port *pt) 162 { 163 return 0; 164 } 165 static inline int is_omap1510_8250(struct uart_8250_port *pt) 166 { 167 return 0; 168 } 169 #endif 170 171 #ifdef CONFIG_SERIAL_8250_DMA 172 extern int serial8250_tx_dma(struct uart_8250_port *); 173 extern int serial8250_rx_dma(struct uart_8250_port *, unsigned int iir); 174 extern int serial8250_request_dma(struct uart_8250_port *); 175 extern void serial8250_release_dma(struct uart_8250_port *); 176 #else 177 static inline int serial8250_tx_dma(struct uart_8250_port *p) 178 { 179 return -1; 180 } 181 static inline int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir) 182 { 183 return -1; 184 } 185 static inline int serial8250_request_dma(struct uart_8250_port *p) 186 { 187 return -1; 188 } 189 static inline void serial8250_release_dma(struct uart_8250_port *p) { } 190 #endif 191