xref: /linux/drivers/tty/serial/21285.c (revision b7019ac550eb3916f34d79db583e9b7ea2524afa) 
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
4  *
5  * Based on drivers/char/serial.c
6  */
7 #include <linux/module.h>
8 #include <linux/tty.h>
9 #include <linux/ioport.h>
10 #include <linux/init.h>
11 #include <linux/console.h>
12 #include <linux/device.h>
13 #include <linux/tty_flip.h>
14 #include <linux/serial_core.h>
15 #include <linux/serial.h>
16 #include <linux/io.h>
17 
18 #include <asm/irq.h>
19 #include <asm/mach-types.h>
20 #include <asm/system_info.h>
21 #include <asm/hardware/dec21285.h>
22 #include <mach/hardware.h>
23 
24 #define BAUD_BASE		(mem_fclk_21285/64)
25 
26 #define SERIAL_21285_NAME	"ttyFB"
27 #define SERIAL_21285_MAJOR	204
28 #define SERIAL_21285_MINOR	4
29 
30 #define RXSTAT_DUMMY_READ	0x80000000
31 #define RXSTAT_FRAME		(1 << 0)
32 #define RXSTAT_PARITY		(1 << 1)
33 #define RXSTAT_OVERRUN		(1 << 2)
34 #define RXSTAT_ANYERR		(RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
35 
36 #define H_UBRLCR_BREAK		(1 << 0)
37 #define H_UBRLCR_PARENB		(1 << 1)
38 #define H_UBRLCR_PAREVN		(1 << 2)
39 #define H_UBRLCR_STOPB		(1 << 3)
40 #define H_UBRLCR_FIFO		(1 << 4)
41 
42 static const char serial21285_name[] = "Footbridge UART";
43 
44 #define tx_enabled(port)	((port)->unused[0])
45 #define rx_enabled(port)	((port)->unused[1])
46 
47 /*
48  * The documented expression for selecting the divisor is:
49  *  BAUD_BASE / baud - 1
50  * However, typically BAUD_BASE is not divisible by baud, so
51  * we want to select the divisor that gives us the minimum
52  * error.  Therefore, we want:
53  *  int(BAUD_BASE / baud - 0.5) ->
54  *  int(BAUD_BASE / baud - (baud >> 1) / baud) ->
55  *  int((BAUD_BASE - (baud >> 1)) / baud)
56  */
57 
58 static void serial21285_stop_tx(struct uart_port *port)
59 {
60 	if (tx_enabled(port)) {
61 		disable_irq_nosync(IRQ_CONTX);
62 		tx_enabled(port) = 0;
63 	}
64 }
65 
66 static void serial21285_start_tx(struct uart_port *port)
67 {
68 	if (!tx_enabled(port)) {
69 		enable_irq(IRQ_CONTX);
70 		tx_enabled(port) = 1;
71 	}
72 }
73 
74 static void serial21285_stop_rx(struct uart_port *port)
75 {
76 	if (rx_enabled(port)) {
77 		disable_irq_nosync(IRQ_CONRX);
78 		rx_enabled(port) = 0;
79 	}
80 }
81 
82 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
83 {
84 	struct uart_port *port = dev_id;
85 	unsigned int status, ch, flag, rxs, max_count = 256;
86 
87 	status = *CSR_UARTFLG;
88 	while (!(status & 0x10) && max_count--) {
89 		ch = *CSR_UARTDR;
90 		flag = TTY_NORMAL;
91 		port->icount.rx++;
92 
93 		rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
94 		if (unlikely(rxs & RXSTAT_ANYERR)) {
95 			if (rxs & RXSTAT_PARITY)
96 				port->icount.parity++;
97 			else if (rxs & RXSTAT_FRAME)
98 				port->icount.frame++;
99 			if (rxs & RXSTAT_OVERRUN)
100 				port->icount.overrun++;
101 
102 			rxs &= port->read_status_mask;
103 
104 			if (rxs & RXSTAT_PARITY)
105 				flag = TTY_PARITY;
106 			else if (rxs & RXSTAT_FRAME)
107 				flag = TTY_FRAME;
108 		}
109 
110 		uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
111 
112 		status = *CSR_UARTFLG;
113 	}
114 	tty_flip_buffer_push(&port->state->port);
115 
116 	return IRQ_HANDLED;
117 }
118 
119 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
120 {
121 	struct uart_port *port = dev_id;
122 	struct circ_buf *xmit = &port->state->xmit;
123 	int count = 256;
124 
125 	if (port->x_char) {
126 		*CSR_UARTDR = port->x_char;
127 		port->icount.tx++;
128 		port->x_char = 0;
129 		goto out;
130 	}
131 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
132 		serial21285_stop_tx(port);
133 		goto out;
134 	}
135 
136 	do {
137 		*CSR_UARTDR = xmit->buf[xmit->tail];
138 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
139 		port->icount.tx++;
140 		if (uart_circ_empty(xmit))
141 			break;
142 	} while (--count > 0 && !(*CSR_UARTFLG & 0x20));
143 
144 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
145 		uart_write_wakeup(port);
146 
147 	if (uart_circ_empty(xmit))
148 		serial21285_stop_tx(port);
149 
150  out:
151 	return IRQ_HANDLED;
152 }
153 
154 static unsigned int serial21285_tx_empty(struct uart_port *port)
155 {
156 	return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT;
157 }
158 
159 /* no modem control lines */
160 static unsigned int serial21285_get_mctrl(struct uart_port *port)
161 {
162 	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
163 }
164 
165 static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl)
166 {
167 }
168 
169 static void serial21285_break_ctl(struct uart_port *port, int break_state)
170 {
171 	unsigned long flags;
172 	unsigned int h_lcr;
173 
174 	spin_lock_irqsave(&port->lock, flags);
175 	h_lcr = *CSR_H_UBRLCR;
176 	if (break_state)
177 		h_lcr |= H_UBRLCR_BREAK;
178 	else
179 		h_lcr &= ~H_UBRLCR_BREAK;
180 	*CSR_H_UBRLCR = h_lcr;
181 	spin_unlock_irqrestore(&port->lock, flags);
182 }
183 
184 static int serial21285_startup(struct uart_port *port)
185 {
186 	int ret;
187 
188 	tx_enabled(port) = 1;
189 	rx_enabled(port) = 1;
190 
191 	ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
192 			  serial21285_name, port);
193 	if (ret == 0) {
194 		ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0,
195 				  serial21285_name, port);
196 		if (ret)
197 			free_irq(IRQ_CONRX, port);
198 	}
199 
200 	return ret;
201 }
202 
203 static void serial21285_shutdown(struct uart_port *port)
204 {
205 	free_irq(IRQ_CONTX, port);
206 	free_irq(IRQ_CONRX, port);
207 }
208 
209 static void
210 serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
211 			struct ktermios *old)
212 {
213 	unsigned long flags;
214 	unsigned int baud, quot, h_lcr, b;
215 
216 	/*
217 	 * We don't support modem control lines.
218 	 */
219 	termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
220 	termios->c_cflag |= CLOCAL;
221 
222 	/*
223 	 * We don't support BREAK character recognition.
224 	 */
225 	termios->c_iflag &= ~(IGNBRK | BRKINT);
226 
227 	/*
228 	 * Ask the core to calculate the divisor for us.
229 	 */
230 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
231 	quot = uart_get_divisor(port, baud);
232 	b = port->uartclk / (16 * quot);
233 	tty_termios_encode_baud_rate(termios, b, b);
234 
235 	switch (termios->c_cflag & CSIZE) {
236 	case CS5:
237 		h_lcr = 0x00;
238 		break;
239 	case CS6:
240 		h_lcr = 0x20;
241 		break;
242 	case CS7:
243 		h_lcr = 0x40;
244 		break;
245 	default: /* CS8 */
246 		h_lcr = 0x60;
247 		break;
248 	}
249 
250 	if (termios->c_cflag & CSTOPB)
251 		h_lcr |= H_UBRLCR_STOPB;
252 	if (termios->c_cflag & PARENB) {
253 		h_lcr |= H_UBRLCR_PARENB;
254 		if (!(termios->c_cflag & PARODD))
255 			h_lcr |= H_UBRLCR_PAREVN;
256 	}
257 
258 	if (port->fifosize)
259 		h_lcr |= H_UBRLCR_FIFO;
260 
261 	spin_lock_irqsave(&port->lock, flags);
262 
263 	/*
264 	 * Update the per-port timeout.
265 	 */
266 	uart_update_timeout(port, termios->c_cflag, baud);
267 
268 	/*
269 	 * Which character status flags are we interested in?
270 	 */
271 	port->read_status_mask = RXSTAT_OVERRUN;
272 	if (termios->c_iflag & INPCK)
273 		port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
274 
275 	/*
276 	 * Which character status flags should we ignore?
277 	 */
278 	port->ignore_status_mask = 0;
279 	if (termios->c_iflag & IGNPAR)
280 		port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
281 	if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
282 		port->ignore_status_mask |= RXSTAT_OVERRUN;
283 
284 	/*
285 	 * Ignore all characters if CREAD is not set.
286 	 */
287 	if ((termios->c_cflag & CREAD) == 0)
288 		port->ignore_status_mask |= RXSTAT_DUMMY_READ;
289 
290 	quot -= 1;
291 
292 	*CSR_UARTCON = 0;
293 	*CSR_L_UBRLCR = quot & 0xff;
294 	*CSR_M_UBRLCR = (quot >> 8) & 0x0f;
295 	*CSR_H_UBRLCR = h_lcr;
296 	*CSR_UARTCON = 1;
297 
298 	spin_unlock_irqrestore(&port->lock, flags);
299 }
300 
301 static const char *serial21285_type(struct uart_port *port)
302 {
303 	return port->type == PORT_21285 ? "DC21285" : NULL;
304 }
305 
306 static void serial21285_release_port(struct uart_port *port)
307 {
308 	release_mem_region(port->mapbase, 32);
309 }
310 
311 static int serial21285_request_port(struct uart_port *port)
312 {
313 	return request_mem_region(port->mapbase, 32, serial21285_name)
314 			 != NULL ? 0 : -EBUSY;
315 }
316 
317 static void serial21285_config_port(struct uart_port *port, int flags)
318 {
319 	if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0)
320 		port->type = PORT_21285;
321 }
322 
323 /*
324  * verify the new serial_struct (for TIOCSSERIAL).
325  */
326 static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser)
327 {
328 	int ret = 0;
329 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285)
330 		ret = -EINVAL;
331 	if (ser->irq <= 0)
332 		ret = -EINVAL;
333 	if (ser->baud_base != port->uartclk / 16)
334 		ret = -EINVAL;
335 	return ret;
336 }
337 
338 static const struct uart_ops serial21285_ops = {
339 	.tx_empty	= serial21285_tx_empty,
340 	.get_mctrl	= serial21285_get_mctrl,
341 	.set_mctrl	= serial21285_set_mctrl,
342 	.stop_tx	= serial21285_stop_tx,
343 	.start_tx	= serial21285_start_tx,
344 	.stop_rx	= serial21285_stop_rx,
345 	.break_ctl	= serial21285_break_ctl,
346 	.startup	= serial21285_startup,
347 	.shutdown	= serial21285_shutdown,
348 	.set_termios	= serial21285_set_termios,
349 	.type		= serial21285_type,
350 	.release_port	= serial21285_release_port,
351 	.request_port	= serial21285_request_port,
352 	.config_port	= serial21285_config_port,
353 	.verify_port	= serial21285_verify_port,
354 };
355 
356 static struct uart_port serial21285_port = {
357 	.mapbase	= 0x42000160,
358 	.iotype		= UPIO_MEM,
359 	.irq		= 0,
360 	.fifosize	= 16,
361 	.ops		= &serial21285_ops,
362 	.flags		= UPF_BOOT_AUTOCONF,
363 };
364 
365 static void serial21285_setup_ports(void)
366 {
367 	serial21285_port.uartclk = mem_fclk_21285 / 4;
368 }
369 
370 #ifdef CONFIG_SERIAL_21285_CONSOLE
371 static void serial21285_console_putchar(struct uart_port *port, int ch)
372 {
373 	while (*CSR_UARTFLG & 0x20)
374 		barrier();
375 	*CSR_UARTDR = ch;
376 }
377 
378 static void
379 serial21285_console_write(struct console *co, const char *s,
380 			  unsigned int count)
381 {
382 	uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
383 }
384 
385 static void __init
386 serial21285_get_options(struct uart_port *port, int *baud,
387 			int *parity, int *bits)
388 {
389 	if (*CSR_UARTCON == 1) {
390 		unsigned int tmp;
391 
392 		tmp = *CSR_H_UBRLCR;
393 		switch (tmp & 0x60) {
394 		case 0x00:
395 			*bits = 5;
396 			break;
397 		case 0x20:
398 			*bits = 6;
399 			break;
400 		case 0x40:
401 			*bits = 7;
402 			break;
403 		default:
404 		case 0x60:
405 			*bits = 8;
406 			break;
407 		}
408 
409 		if (tmp & H_UBRLCR_PARENB) {
410 			*parity = 'o';
411 			if (tmp & H_UBRLCR_PAREVN)
412 				*parity = 'e';
413 		}
414 
415 		tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8);
416 
417 		*baud = port->uartclk / (16 * (tmp + 1));
418 	}
419 }
420 
421 static int __init serial21285_console_setup(struct console *co, char *options)
422 {
423 	struct uart_port *port = &serial21285_port;
424 	int baud = 9600;
425 	int bits = 8;
426 	int parity = 'n';
427 	int flow = 'n';
428 
429 	if (machine_is_personal_server())
430 		baud = 57600;
431 
432 	/*
433 	 * Check whether an invalid uart number has been specified, and
434 	 * if so, search for the first available port that does have
435 	 * console support.
436 	 */
437 	if (options)
438 		uart_parse_options(options, &baud, &parity, &bits, &flow);
439 	else
440 		serial21285_get_options(port, &baud, &parity, &bits);
441 
442 	return uart_set_options(port, co, baud, parity, bits, flow);
443 }
444 
445 static struct uart_driver serial21285_reg;
446 
447 static struct console serial21285_console =
448 {
449 	.name		= SERIAL_21285_NAME,
450 	.write		= serial21285_console_write,
451 	.device		= uart_console_device,
452 	.setup		= serial21285_console_setup,
453 	.flags		= CON_PRINTBUFFER,
454 	.index		= -1,
455 	.data		= &serial21285_reg,
456 };
457 
458 static int __init rs285_console_init(void)
459 {
460 	serial21285_setup_ports();
461 	register_console(&serial21285_console);
462 	return 0;
463 }
464 console_initcall(rs285_console_init);
465 
466 #define SERIAL_21285_CONSOLE	&serial21285_console
467 #else
468 #define SERIAL_21285_CONSOLE	NULL
469 #endif
470 
471 static struct uart_driver serial21285_reg = {
472 	.owner			= THIS_MODULE,
473 	.driver_name		= "ttyFB",
474 	.dev_name		= "ttyFB",
475 	.major			= SERIAL_21285_MAJOR,
476 	.minor			= SERIAL_21285_MINOR,
477 	.nr			= 1,
478 	.cons			= SERIAL_21285_CONSOLE,
479 };
480 
481 static int __init serial21285_init(void)
482 {
483 	int ret;
484 
485 	printk(KERN_INFO "Serial: 21285 driver\n");
486 
487 	serial21285_setup_ports();
488 
489 	ret = uart_register_driver(&serial21285_reg);
490 	if (ret == 0)
491 		uart_add_one_port(&serial21285_reg, &serial21285_port);
492 
493 	return ret;
494 }
495 
496 static void __exit serial21285_exit(void)
497 {
498 	uart_remove_one_port(&serial21285_reg, &serial21285_port);
499 	uart_unregister_driver(&serial21285_reg);
500 }
501 
502 module_init(serial21285_init);
503 module_exit(serial21285_exit);
504 
505 MODULE_LICENSE("GPL");
506 MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
507 MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
508