1 /* 2 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) 3 * 4 * Copyright (C) 2011 Samsung Electronics 5 * Donggeun Kim <dg77.kim@samsung.com> 6 * Amit Daniel Kachhap <amit.kachhap@linaro.org> 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 21 * 22 */ 23 24 #include <linux/clk.h> 25 #include <linux/io.h> 26 #include <linux/interrupt.h> 27 #include <linux/module.h> 28 #include <linux/of.h> 29 #include <linux/of_address.h> 30 #include <linux/of_irq.h> 31 #include <linux/platform_device.h> 32 #include <linux/regulator/consumer.h> 33 34 #include "exynos_thermal_common.h" 35 #include "exynos_tmu.h" 36 #include "exynos_tmu_data.h" 37 38 /** 39 * struct exynos_tmu_data : A structure to hold the private data of the TMU 40 driver 41 * @id: identifier of the one instance of the TMU controller. 42 * @pdata: pointer to the tmu platform/configuration data 43 * @base: base address of the single instance of the TMU controller. 44 * @base_second: base address of the common registers of the TMU controller. 45 * @irq: irq number of the TMU controller. 46 * @soc: id of the SOC type. 47 * @irq_work: pointer to the irq work structure. 48 * @lock: lock to implement synchronization. 49 * @clk: pointer to the clock structure. 50 * @clk_sec: pointer to the clock structure for accessing the base_second. 51 * @temp_error1: fused value of the first point trim. 52 * @temp_error2: fused value of the second point trim. 53 * @regulator: pointer to the TMU regulator structure. 54 * @reg_conf: pointer to structure to register with core thermal. 55 */ 56 struct exynos_tmu_data { 57 int id; 58 struct exynos_tmu_platform_data *pdata; 59 void __iomem *base; 60 void __iomem *base_second; 61 int irq; 62 enum soc_type soc; 63 struct work_struct irq_work; 64 struct mutex lock; 65 struct clk *clk, *clk_sec; 66 u8 temp_error1, temp_error2; 67 struct regulator *regulator; 68 struct thermal_sensor_conf *reg_conf; 69 }; 70 71 /* 72 * TMU treats temperature as a mapped temperature code. 73 * The temperature is converted differently depending on the calibration type. 74 */ 75 static int temp_to_code(struct exynos_tmu_data *data, u8 temp) 76 { 77 struct exynos_tmu_platform_data *pdata = data->pdata; 78 int temp_code; 79 80 switch (pdata->cal_type) { 81 case TYPE_TWO_POINT_TRIMMING: 82 temp_code = (temp - pdata->first_point_trim) * 83 (data->temp_error2 - data->temp_error1) / 84 (pdata->second_point_trim - pdata->first_point_trim) + 85 data->temp_error1; 86 break; 87 case TYPE_ONE_POINT_TRIMMING: 88 temp_code = temp + data->temp_error1 - pdata->first_point_trim; 89 break; 90 default: 91 temp_code = temp + pdata->default_temp_offset; 92 break; 93 } 94 95 return temp_code; 96 } 97 98 /* 99 * Calculate a temperature value from a temperature code. 100 * The unit of the temperature is degree Celsius. 101 */ 102 static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) 103 { 104 struct exynos_tmu_platform_data *pdata = data->pdata; 105 int temp; 106 107 switch (pdata->cal_type) { 108 case TYPE_TWO_POINT_TRIMMING: 109 temp = (temp_code - data->temp_error1) * 110 (pdata->second_point_trim - pdata->first_point_trim) / 111 (data->temp_error2 - data->temp_error1) + 112 pdata->first_point_trim; 113 break; 114 case TYPE_ONE_POINT_TRIMMING: 115 temp = temp_code - data->temp_error1 + pdata->first_point_trim; 116 break; 117 default: 118 temp = temp_code - pdata->default_temp_offset; 119 break; 120 } 121 122 return temp; 123 } 124 125 static int exynos_tmu_initialize(struct platform_device *pdev) 126 { 127 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 128 struct exynos_tmu_platform_data *pdata = data->pdata; 129 const struct exynos_tmu_registers *reg = pdata->registers; 130 unsigned int status, trim_info = 0, con; 131 unsigned int rising_threshold = 0, falling_threshold = 0; 132 int ret = 0, threshold_code, i, trigger_levs = 0; 133 134 mutex_lock(&data->lock); 135 clk_enable(data->clk); 136 if (!IS_ERR(data->clk_sec)) 137 clk_enable(data->clk_sec); 138 139 if (TMU_SUPPORTS(pdata, READY_STATUS)) { 140 status = readb(data->base + reg->tmu_status); 141 if (!status) { 142 ret = -EBUSY; 143 goto out; 144 } 145 } 146 147 if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) 148 __raw_writel(1, data->base + reg->triminfo_ctrl); 149 150 /* Save trimming info in order to perform calibration */ 151 if (data->soc == SOC_ARCH_EXYNOS5440) { 152 /* 153 * For exynos5440 soc triminfo value is swapped between TMU0 and 154 * TMU2, so the below logic is needed. 155 */ 156 switch (data->id) { 157 case 0: 158 trim_info = readl(data->base + 159 EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); 160 break; 161 case 1: 162 trim_info = readl(data->base + reg->triminfo_data); 163 break; 164 case 2: 165 trim_info = readl(data->base - 166 EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data); 167 } 168 } else { 169 /* On exynos5420 the triminfo register is in the shared space */ 170 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) 171 trim_info = readl(data->base_second + 172 reg->triminfo_data); 173 else 174 trim_info = readl(data->base + reg->triminfo_data); 175 } 176 data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; 177 data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & 178 EXYNOS_TMU_TEMP_MASK); 179 180 if (!data->temp_error1 || 181 (pdata->min_efuse_value > data->temp_error1) || 182 (data->temp_error1 > pdata->max_efuse_value)) 183 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; 184 185 if (!data->temp_error2) 186 data->temp_error2 = 187 (pdata->efuse_value >> reg->triminfo_85_shift) & 188 EXYNOS_TMU_TEMP_MASK; 189 190 for (i = 0; i < pdata->max_trigger_level; i++) { 191 if (!pdata->trigger_levels[i]) 192 continue; 193 194 /* Count trigger levels except the HW trip*/ 195 if (!(pdata->trigger_type[i] == HW_TRIP)) 196 trigger_levs++; 197 } 198 199 rising_threshold = readl(data->base + reg->threshold_th0); 200 201 if (data->soc == SOC_ARCH_EXYNOS4210) { 202 /* Write temperature code for threshold */ 203 threshold_code = temp_to_code(data, pdata->threshold); 204 writeb(threshold_code, 205 data->base + reg->threshold_temp); 206 for (i = 0; i < trigger_levs; i++) 207 writeb(pdata->trigger_levels[i], data->base + 208 reg->threshold_th0 + i * sizeof(reg->threshold_th0)); 209 210 writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear); 211 } else { 212 /* Write temperature code for rising and falling threshold */ 213 for (i = 0; 214 i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { 215 threshold_code = temp_to_code(data, 216 pdata->trigger_levels[i]); 217 rising_threshold &= ~(0xff << 8 * i); 218 rising_threshold |= threshold_code << 8 * i; 219 if (pdata->threshold_falling) { 220 threshold_code = temp_to_code(data, 221 pdata->trigger_levels[i] - 222 pdata->threshold_falling); 223 falling_threshold |= threshold_code << 8 * i; 224 } 225 } 226 227 writel(rising_threshold, 228 data->base + reg->threshold_th0); 229 writel(falling_threshold, 230 data->base + reg->threshold_th1); 231 232 writel((reg->intclr_rise_mask << reg->intclr_rise_shift) | 233 (reg->intclr_fall_mask << reg->intclr_fall_shift), 234 data->base + reg->tmu_intclear); 235 236 /* if last threshold limit is also present */ 237 i = pdata->max_trigger_level - 1; 238 if (pdata->trigger_levels[i] && 239 (pdata->trigger_type[i] == HW_TRIP)) { 240 threshold_code = temp_to_code(data, 241 pdata->trigger_levels[i]); 242 if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { 243 /* 1-4 level to be assigned in th0 reg */ 244 rising_threshold &= ~(0xff << 8 * i); 245 rising_threshold |= threshold_code << 8 * i; 246 writel(rising_threshold, 247 data->base + reg->threshold_th0); 248 } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) { 249 /* 5th level to be assigned in th2 reg */ 250 rising_threshold = 251 threshold_code << reg->threshold_th3_l0_shift; 252 writel(rising_threshold, 253 data->base + reg->threshold_th2); 254 } 255 con = readl(data->base + reg->tmu_ctrl); 256 con |= (1 << reg->therm_trip_en_shift); 257 writel(con, data->base + reg->tmu_ctrl); 258 } 259 } 260 /*Clear the PMIN in the common TMU register*/ 261 if (reg->tmu_pmin && !data->id) 262 writel(0, data->base_second + reg->tmu_pmin); 263 out: 264 clk_disable(data->clk); 265 mutex_unlock(&data->lock); 266 if (!IS_ERR(data->clk_sec)) 267 clk_disable(data->clk_sec); 268 269 return ret; 270 } 271 272 static void exynos_tmu_control(struct platform_device *pdev, bool on) 273 { 274 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 275 struct exynos_tmu_platform_data *pdata = data->pdata; 276 const struct exynos_tmu_registers *reg = pdata->registers; 277 unsigned int con, interrupt_en; 278 279 mutex_lock(&data->lock); 280 clk_enable(data->clk); 281 282 con = readl(data->base + reg->tmu_ctrl); 283 284 if (pdata->test_mux) 285 con |= (pdata->test_mux << reg->test_mux_addr_shift); 286 287 if (pdata->reference_voltage) { 288 con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); 289 con |= pdata->reference_voltage << reg->buf_vref_sel_shift; 290 } 291 292 if (pdata->gain) { 293 con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); 294 con |= (pdata->gain << reg->buf_slope_sel_shift); 295 } 296 297 if (pdata->noise_cancel_mode) { 298 con &= ~(reg->therm_trip_mode_mask << 299 reg->therm_trip_mode_shift); 300 con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); 301 } 302 303 if (on) { 304 con |= (1 << reg->core_en_shift); 305 interrupt_en = 306 pdata->trigger_enable[3] << reg->inten_rise3_shift | 307 pdata->trigger_enable[2] << reg->inten_rise2_shift | 308 pdata->trigger_enable[1] << reg->inten_rise1_shift | 309 pdata->trigger_enable[0] << reg->inten_rise0_shift; 310 if (TMU_SUPPORTS(pdata, FALLING_TRIP)) 311 interrupt_en |= 312 interrupt_en << reg->inten_fall0_shift; 313 } else { 314 con &= ~(1 << reg->core_en_shift); 315 interrupt_en = 0; /* Disable all interrupts */ 316 } 317 writel(interrupt_en, data->base + reg->tmu_inten); 318 writel(con, data->base + reg->tmu_ctrl); 319 320 clk_disable(data->clk); 321 mutex_unlock(&data->lock); 322 } 323 324 static int exynos_tmu_read(struct exynos_tmu_data *data) 325 { 326 struct exynos_tmu_platform_data *pdata = data->pdata; 327 const struct exynos_tmu_registers *reg = pdata->registers; 328 u8 temp_code; 329 int temp; 330 331 mutex_lock(&data->lock); 332 clk_enable(data->clk); 333 334 temp_code = readb(data->base + reg->tmu_cur_temp); 335 336 if (data->soc == SOC_ARCH_EXYNOS4210) 337 /* temp_code should range between 75 and 175 */ 338 if (temp_code < 75 || temp_code > 175) { 339 temp = -ENODATA; 340 goto out; 341 } 342 343 temp = code_to_temp(data, temp_code); 344 out: 345 clk_disable(data->clk); 346 mutex_unlock(&data->lock); 347 348 return temp; 349 } 350 351 #ifdef CONFIG_THERMAL_EMULATION 352 static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) 353 { 354 struct exynos_tmu_data *data = drv_data; 355 struct exynos_tmu_platform_data *pdata = data->pdata; 356 const struct exynos_tmu_registers *reg = pdata->registers; 357 unsigned int val; 358 int ret = -EINVAL; 359 360 if (!TMU_SUPPORTS(pdata, EMULATION)) 361 goto out; 362 363 if (temp && temp < MCELSIUS) 364 goto out; 365 366 mutex_lock(&data->lock); 367 clk_enable(data->clk); 368 369 val = readl(data->base + reg->emul_con); 370 371 if (temp) { 372 temp /= MCELSIUS; 373 374 if (TMU_SUPPORTS(pdata, EMUL_TIME)) { 375 val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift); 376 val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift); 377 } 378 val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift); 379 val |= (temp_to_code(data, temp) << reg->emul_temp_shift) | 380 EXYNOS_EMUL_ENABLE; 381 } else { 382 val &= ~EXYNOS_EMUL_ENABLE; 383 } 384 385 writel(val, data->base + reg->emul_con); 386 387 clk_disable(data->clk); 388 mutex_unlock(&data->lock); 389 return 0; 390 out: 391 return ret; 392 } 393 #else 394 static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) 395 { return -EINVAL; } 396 #endif/*CONFIG_THERMAL_EMULATION*/ 397 398 static void exynos_tmu_work(struct work_struct *work) 399 { 400 struct exynos_tmu_data *data = container_of(work, 401 struct exynos_tmu_data, irq_work); 402 struct exynos_tmu_platform_data *pdata = data->pdata; 403 const struct exynos_tmu_registers *reg = pdata->registers; 404 unsigned int val_irq, val_type; 405 406 if (!IS_ERR(data->clk_sec)) 407 clk_enable(data->clk_sec); 408 /* Find which sensor generated this interrupt */ 409 if (reg->tmu_irqstatus) { 410 val_type = readl(data->base_second + reg->tmu_irqstatus); 411 if (!((val_type >> data->id) & 0x1)) 412 goto out; 413 } 414 if (!IS_ERR(data->clk_sec)) 415 clk_disable(data->clk_sec); 416 417 exynos_report_trigger(data->reg_conf); 418 mutex_lock(&data->lock); 419 clk_enable(data->clk); 420 421 /* TODO: take action based on particular interrupt */ 422 val_irq = readl(data->base + reg->tmu_intstat); 423 /* clear the interrupts */ 424 writel(val_irq, data->base + reg->tmu_intclear); 425 426 clk_disable(data->clk); 427 mutex_unlock(&data->lock); 428 out: 429 enable_irq(data->irq); 430 } 431 432 static irqreturn_t exynos_tmu_irq(int irq, void *id) 433 { 434 struct exynos_tmu_data *data = id; 435 436 disable_irq_nosync(irq); 437 schedule_work(&data->irq_work); 438 439 return IRQ_HANDLED; 440 } 441 442 static const struct of_device_id exynos_tmu_match[] = { 443 { 444 .compatible = "samsung,exynos3250-tmu", 445 .data = (void *)EXYNOS3250_TMU_DRV_DATA, 446 }, 447 { 448 .compatible = "samsung,exynos4210-tmu", 449 .data = (void *)EXYNOS4210_TMU_DRV_DATA, 450 }, 451 { 452 .compatible = "samsung,exynos4412-tmu", 453 .data = (void *)EXYNOS4412_TMU_DRV_DATA, 454 }, 455 { 456 .compatible = "samsung,exynos5250-tmu", 457 .data = (void *)EXYNOS5250_TMU_DRV_DATA, 458 }, 459 { 460 .compatible = "samsung,exynos5260-tmu", 461 .data = (void *)EXYNOS5260_TMU_DRV_DATA, 462 }, 463 { 464 .compatible = "samsung,exynos5420-tmu", 465 .data = (void *)EXYNOS5420_TMU_DRV_DATA, 466 }, 467 { 468 .compatible = "samsung,exynos5420-tmu-ext-triminfo", 469 .data = (void *)EXYNOS5420_TMU_DRV_DATA, 470 }, 471 { 472 .compatible = "samsung,exynos5440-tmu", 473 .data = (void *)EXYNOS5440_TMU_DRV_DATA, 474 }, 475 {}, 476 }; 477 MODULE_DEVICE_TABLE(of, exynos_tmu_match); 478 479 static inline struct exynos_tmu_platform_data *exynos_get_driver_data( 480 struct platform_device *pdev, int id) 481 { 482 struct exynos_tmu_init_data *data_table; 483 struct exynos_tmu_platform_data *tmu_data; 484 const struct of_device_id *match; 485 486 match = of_match_node(exynos_tmu_match, pdev->dev.of_node); 487 if (!match) 488 return NULL; 489 data_table = (struct exynos_tmu_init_data *) match->data; 490 if (!data_table || id >= data_table->tmu_count) 491 return NULL; 492 tmu_data = data_table->tmu_data; 493 return (struct exynos_tmu_platform_data *) (tmu_data + id); 494 } 495 496 static int exynos_map_dt_data(struct platform_device *pdev) 497 { 498 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 499 struct exynos_tmu_platform_data *pdata; 500 struct resource res; 501 int ret; 502 503 if (!data || !pdev->dev.of_node) 504 return -ENODEV; 505 506 /* 507 * Try enabling the regulator if found 508 * TODO: Add regulator as an SOC feature, so that regulator enable 509 * is a compulsory call. 510 */ 511 data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); 512 if (!IS_ERR(data->regulator)) { 513 ret = regulator_enable(data->regulator); 514 if (ret) { 515 dev_err(&pdev->dev, "failed to enable vtmu\n"); 516 return ret; 517 } 518 } else { 519 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); 520 } 521 522 data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); 523 if (data->id < 0) 524 data->id = 0; 525 526 data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 527 if (data->irq <= 0) { 528 dev_err(&pdev->dev, "failed to get IRQ\n"); 529 return -ENODEV; 530 } 531 532 if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { 533 dev_err(&pdev->dev, "failed to get Resource 0\n"); 534 return -ENODEV; 535 } 536 537 data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); 538 if (!data->base) { 539 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 540 return -EADDRNOTAVAIL; 541 } 542 543 pdata = exynos_get_driver_data(pdev, data->id); 544 if (!pdata) { 545 dev_err(&pdev->dev, "No platform init data supplied.\n"); 546 return -ENODEV; 547 } 548 data->pdata = pdata; 549 /* 550 * Check if the TMU shares some registers and then try to map the 551 * memory of common registers. 552 */ 553 if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE)) 554 return 0; 555 556 if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { 557 dev_err(&pdev->dev, "failed to get Resource 1\n"); 558 return -ENODEV; 559 } 560 561 data->base_second = devm_ioremap(&pdev->dev, res.start, 562 resource_size(&res)); 563 if (!data->base_second) { 564 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 565 return -ENOMEM; 566 } 567 568 return 0; 569 } 570 571 static int exynos_tmu_probe(struct platform_device *pdev) 572 { 573 struct exynos_tmu_data *data; 574 struct exynos_tmu_platform_data *pdata; 575 struct thermal_sensor_conf *sensor_conf; 576 int ret, i; 577 578 data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), 579 GFP_KERNEL); 580 if (!data) 581 return -ENOMEM; 582 583 platform_set_drvdata(pdev, data); 584 mutex_init(&data->lock); 585 586 ret = exynos_map_dt_data(pdev); 587 if (ret) 588 return ret; 589 590 pdata = data->pdata; 591 592 INIT_WORK(&data->irq_work, exynos_tmu_work); 593 594 data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); 595 if (IS_ERR(data->clk)) { 596 dev_err(&pdev->dev, "Failed to get clock\n"); 597 return PTR_ERR(data->clk); 598 } 599 600 data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); 601 if (IS_ERR(data->clk_sec)) { 602 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { 603 dev_err(&pdev->dev, "Failed to get triminfo clock\n"); 604 return PTR_ERR(data->clk_sec); 605 } 606 } else { 607 ret = clk_prepare(data->clk_sec); 608 if (ret) { 609 dev_err(&pdev->dev, "Failed to get clock\n"); 610 return ret; 611 } 612 } 613 614 ret = clk_prepare(data->clk); 615 if (ret) { 616 dev_err(&pdev->dev, "Failed to get clock\n"); 617 goto err_clk_sec; 618 } 619 620 if (pdata->type == SOC_ARCH_EXYNOS3250 || 621 pdata->type == SOC_ARCH_EXYNOS4210 || 622 pdata->type == SOC_ARCH_EXYNOS4412 || 623 pdata->type == SOC_ARCH_EXYNOS5250 || 624 pdata->type == SOC_ARCH_EXYNOS5260 || 625 pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO || 626 pdata->type == SOC_ARCH_EXYNOS5440) 627 data->soc = pdata->type; 628 else { 629 ret = -EINVAL; 630 dev_err(&pdev->dev, "Platform not supported\n"); 631 goto err_clk; 632 } 633 634 ret = exynos_tmu_initialize(pdev); 635 if (ret) { 636 dev_err(&pdev->dev, "Failed to initialize TMU\n"); 637 goto err_clk; 638 } 639 640 exynos_tmu_control(pdev, true); 641 642 /* Allocate a structure to register with the exynos core thermal */ 643 sensor_conf = devm_kzalloc(&pdev->dev, 644 sizeof(struct thermal_sensor_conf), GFP_KERNEL); 645 if (!sensor_conf) { 646 ret = -ENOMEM; 647 goto err_clk; 648 } 649 sprintf(sensor_conf->name, "therm_zone%d", data->id); 650 sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; 651 sensor_conf->write_emul_temp = 652 (int (*)(void *, unsigned long))exynos_tmu_set_emulation; 653 sensor_conf->driver_data = data; 654 sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + 655 pdata->trigger_enable[1] + pdata->trigger_enable[2]+ 656 pdata->trigger_enable[3]; 657 658 for (i = 0; i < sensor_conf->trip_data.trip_count; i++) { 659 sensor_conf->trip_data.trip_val[i] = 660 pdata->threshold + pdata->trigger_levels[i]; 661 sensor_conf->trip_data.trip_type[i] = 662 pdata->trigger_type[i]; 663 } 664 665 sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; 666 667 sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; 668 for (i = 0; i < pdata->freq_tab_count; i++) { 669 sensor_conf->cooling_data.freq_data[i].freq_clip_max = 670 pdata->freq_tab[i].freq_clip_max; 671 sensor_conf->cooling_data.freq_data[i].temp_level = 672 pdata->freq_tab[i].temp_level; 673 } 674 sensor_conf->dev = &pdev->dev; 675 /* Register the sensor with thermal management interface */ 676 ret = exynos_register_thermal(sensor_conf); 677 if (ret) { 678 dev_err(&pdev->dev, "Failed to register thermal interface\n"); 679 goto err_clk; 680 } 681 data->reg_conf = sensor_conf; 682 683 ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, 684 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); 685 if (ret) { 686 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); 687 goto err_clk; 688 } 689 690 return 0; 691 err_clk: 692 clk_unprepare(data->clk); 693 err_clk_sec: 694 if (!IS_ERR(data->clk_sec)) 695 clk_unprepare(data->clk_sec); 696 return ret; 697 } 698 699 static int exynos_tmu_remove(struct platform_device *pdev) 700 { 701 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 702 703 exynos_unregister_thermal(data->reg_conf); 704 705 exynos_tmu_control(pdev, false); 706 707 clk_unprepare(data->clk); 708 if (!IS_ERR(data->clk_sec)) 709 clk_unprepare(data->clk_sec); 710 711 if (!IS_ERR(data->regulator)) 712 regulator_disable(data->regulator); 713 714 return 0; 715 } 716 717 #ifdef CONFIG_PM_SLEEP 718 static int exynos_tmu_suspend(struct device *dev) 719 { 720 exynos_tmu_control(to_platform_device(dev), false); 721 722 return 0; 723 } 724 725 static int exynos_tmu_resume(struct device *dev) 726 { 727 struct platform_device *pdev = to_platform_device(dev); 728 729 exynos_tmu_initialize(pdev); 730 exynos_tmu_control(pdev, true); 731 732 return 0; 733 } 734 735 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, 736 exynos_tmu_suspend, exynos_tmu_resume); 737 #define EXYNOS_TMU_PM (&exynos_tmu_pm) 738 #else 739 #define EXYNOS_TMU_PM NULL 740 #endif 741 742 static struct platform_driver exynos_tmu_driver = { 743 .driver = { 744 .name = "exynos-tmu", 745 .owner = THIS_MODULE, 746 .pm = EXYNOS_TMU_PM, 747 .of_match_table = exynos_tmu_match, 748 }, 749 .probe = exynos_tmu_probe, 750 .remove = exynos_tmu_remove, 751 }; 752 753 module_platform_driver(exynos_tmu_driver); 754 755 MODULE_DESCRIPTION("EXYNOS TMU Driver"); 756 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); 757 MODULE_LICENSE("GPL"); 758 MODULE_ALIAS("platform:exynos-tmu"); 759