1 /* 2 * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) 3 * 4 * Copyright (C) 2014 Samsung Electronics 5 * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> 6 * Lukasz Majewski <l.majewski@samsung.com> 7 * 8 * Copyright (C) 2011 Samsung Electronics 9 * Donggeun Kim <dg77.kim@samsung.com> 10 * Amit Daniel Kachhap <amit.kachhap@linaro.org> 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 25 * 26 */ 27 28 #include <linux/clk.h> 29 #include <linux/io.h> 30 #include <linux/interrupt.h> 31 #include <linux/module.h> 32 #include <linux/of.h> 33 #include <linux/of_address.h> 34 #include <linux/of_irq.h> 35 #include <linux/platform_device.h> 36 #include <linux/regulator/consumer.h> 37 38 #include "exynos_tmu.h" 39 #include "../thermal_core.h" 40 41 /* Exynos generic registers */ 42 #define EXYNOS_TMU_REG_TRIMINFO 0x0 43 #define EXYNOS_TMU_REG_CONTROL 0x20 44 #define EXYNOS_TMU_REG_STATUS 0x28 45 #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 46 #define EXYNOS_TMU_REG_INTEN 0x70 47 #define EXYNOS_TMU_REG_INTSTAT 0x74 48 #define EXYNOS_TMU_REG_INTCLEAR 0x78 49 50 #define EXYNOS_TMU_TEMP_MASK 0xff 51 #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 52 #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f 53 #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf 54 #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 55 #define EXYNOS_TMU_CORE_EN_SHIFT 0 56 57 /* Exynos3250 specific registers */ 58 #define EXYNOS_TMU_TRIMINFO_CON1 0x10 59 60 /* Exynos4210 specific registers */ 61 #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 62 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 63 64 /* Exynos5250, Exynos4412, Exynos3250 specific registers */ 65 #define EXYNOS_TMU_TRIMINFO_CON2 0x14 66 #define EXYNOS_THD_TEMP_RISE 0x50 67 #define EXYNOS_THD_TEMP_FALL 0x54 68 #define EXYNOS_EMUL_CON 0x80 69 70 #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 71 #define EXYNOS_TRIMINFO_25_SHIFT 0 72 #define EXYNOS_TRIMINFO_85_SHIFT 8 73 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 74 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 75 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 76 77 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 78 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 79 #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 80 #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 81 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 82 83 #define EXYNOS_EMUL_TIME 0x57F0 84 #define EXYNOS_EMUL_TIME_MASK 0xffff 85 #define EXYNOS_EMUL_TIME_SHIFT 16 86 #define EXYNOS_EMUL_DATA_SHIFT 8 87 #define EXYNOS_EMUL_DATA_MASK 0xFF 88 #define EXYNOS_EMUL_ENABLE 0x1 89 90 /* Exynos5260 specific */ 91 #define EXYNOS5260_TMU_REG_INTEN 0xC0 92 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 93 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 94 #define EXYNOS5260_EMUL_CON 0x100 95 96 /* Exynos4412 specific */ 97 #define EXYNOS4412_MUX_ADDR_VALUE 6 98 #define EXYNOS4412_MUX_ADDR_SHIFT 20 99 100 /* Exynos5433 specific registers */ 101 #define EXYNOS5433_TMU_REG_CONTROL1 0x024 102 #define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c 103 #define EXYNOS5433_TMU_COUNTER_VALUE0 0x030 104 #define EXYNOS5433_TMU_COUNTER_VALUE1 0x034 105 #define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044 106 #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 107 #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 108 #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 109 #define EXYNOS5433_THD_TEMP_FALL7_4 0x064 110 #define EXYNOS5433_TMU_REG_INTEN 0x0c0 111 #define EXYNOS5433_TMU_REG_INTPEND 0x0c8 112 #define EXYNOS5433_TMU_EMUL_CON 0x110 113 #define EXYNOS5433_TMU_PD_DET_EN 0x130 114 115 #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 116 #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 117 #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ 118 (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) 119 #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) 120 121 #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 122 #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 123 124 #define EXYNOS5433_PD_DET_EN 1 125 126 /*exynos5440 specific registers*/ 127 #define EXYNOS5440_TMU_S0_7_TRIM 0x000 128 #define EXYNOS5440_TMU_S0_7_CTRL 0x020 129 #define EXYNOS5440_TMU_S0_7_DEBUG 0x040 130 #define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 131 #define EXYNOS5440_TMU_S0_7_TH0 0x110 132 #define EXYNOS5440_TMU_S0_7_TH1 0x130 133 #define EXYNOS5440_TMU_S0_7_TH2 0x150 134 #define EXYNOS5440_TMU_S0_7_IRQEN 0x210 135 #define EXYNOS5440_TMU_S0_7_IRQ 0x230 136 /* exynos5440 common registers */ 137 #define EXYNOS5440_TMU_IRQ_STATUS 0x000 138 #define EXYNOS5440_TMU_PMIN 0x004 139 140 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 141 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 142 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 143 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 144 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 145 #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 146 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 147 148 /* Exynos7 specific registers */ 149 #define EXYNOS7_THD_TEMP_RISE7_6 0x50 150 #define EXYNOS7_THD_TEMP_FALL7_6 0x60 151 #define EXYNOS7_TMU_REG_INTEN 0x110 152 #define EXYNOS7_TMU_REG_INTPEND 0x118 153 #define EXYNOS7_TMU_REG_EMUL_CON 0x160 154 155 #define EXYNOS7_TMU_TEMP_MASK 0x1ff 156 #define EXYNOS7_PD_DET_EN_SHIFT 23 157 #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 158 #define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1 159 #define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2 160 #define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3 161 #define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4 162 #define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5 163 #define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6 164 #define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7 165 #define EXYNOS7_EMUL_DATA_SHIFT 7 166 #define EXYNOS7_EMUL_DATA_MASK 0x1ff 167 168 #define MCELSIUS 1000 169 /** 170 * struct exynos_tmu_data : A structure to hold the private data of the TMU 171 driver 172 * @id: identifier of the one instance of the TMU controller. 173 * @pdata: pointer to the tmu platform/configuration data 174 * @base: base address of the single instance of the TMU controller. 175 * @base_second: base address of the common registers of the TMU controller. 176 * @irq: irq number of the TMU controller. 177 * @soc: id of the SOC type. 178 * @irq_work: pointer to the irq work structure. 179 * @lock: lock to implement synchronization. 180 * @clk: pointer to the clock structure. 181 * @clk_sec: pointer to the clock structure for accessing the base_second. 182 * @sclk: pointer to the clock structure for accessing the tmu special clk. 183 * @temp_error1: fused value of the first point trim. 184 * @temp_error2: fused value of the second point trim. 185 * @regulator: pointer to the TMU regulator structure. 186 * @reg_conf: pointer to structure to register with core thermal. 187 * @tmu_initialize: SoC specific TMU initialization method 188 * @tmu_control: SoC specific TMU control method 189 * @tmu_read: SoC specific TMU temperature read method 190 * @tmu_set_emulation: SoC specific TMU emulation setting method 191 * @tmu_clear_irqs: SoC specific TMU interrupts clearing method 192 */ 193 struct exynos_tmu_data { 194 int id; 195 struct exynos_tmu_platform_data *pdata; 196 void __iomem *base; 197 void __iomem *base_second; 198 int irq; 199 enum soc_type soc; 200 struct work_struct irq_work; 201 struct mutex lock; 202 struct clk *clk, *clk_sec, *sclk; 203 u16 temp_error1, temp_error2; 204 struct regulator *regulator; 205 struct thermal_zone_device *tzd; 206 207 int (*tmu_initialize)(struct platform_device *pdev); 208 void (*tmu_control)(struct platform_device *pdev, bool on); 209 int (*tmu_read)(struct exynos_tmu_data *data); 210 void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); 211 void (*tmu_clear_irqs)(struct exynos_tmu_data *data); 212 }; 213 214 static void exynos_report_trigger(struct exynos_tmu_data *p) 215 { 216 char data[10], *envp[] = { data, NULL }; 217 struct thermal_zone_device *tz = p->tzd; 218 int temp; 219 unsigned int i; 220 221 if (!tz) { 222 pr_err("No thermal zone device defined\n"); 223 return; 224 } 225 226 thermal_zone_device_update(tz); 227 228 mutex_lock(&tz->lock); 229 /* Find the level for which trip happened */ 230 for (i = 0; i < of_thermal_get_ntrips(tz); i++) { 231 tz->ops->get_trip_temp(tz, i, &temp); 232 if (tz->last_temperature < temp) 233 break; 234 } 235 236 snprintf(data, sizeof(data), "%u", i); 237 kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp); 238 mutex_unlock(&tz->lock); 239 } 240 241 /* 242 * TMU treats temperature as a mapped temperature code. 243 * The temperature is converted differently depending on the calibration type. 244 */ 245 static int temp_to_code(struct exynos_tmu_data *data, u8 temp) 246 { 247 struct exynos_tmu_platform_data *pdata = data->pdata; 248 int temp_code; 249 250 switch (pdata->cal_type) { 251 case TYPE_TWO_POINT_TRIMMING: 252 temp_code = (temp - pdata->first_point_trim) * 253 (data->temp_error2 - data->temp_error1) / 254 (pdata->second_point_trim - pdata->first_point_trim) + 255 data->temp_error1; 256 break; 257 case TYPE_ONE_POINT_TRIMMING: 258 temp_code = temp + data->temp_error1 - pdata->first_point_trim; 259 break; 260 default: 261 temp_code = temp + pdata->default_temp_offset; 262 break; 263 } 264 265 return temp_code; 266 } 267 268 /* 269 * Calculate a temperature value from a temperature code. 270 * The unit of the temperature is degree Celsius. 271 */ 272 static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) 273 { 274 struct exynos_tmu_platform_data *pdata = data->pdata; 275 int temp; 276 277 switch (pdata->cal_type) { 278 case TYPE_TWO_POINT_TRIMMING: 279 temp = (temp_code - data->temp_error1) * 280 (pdata->second_point_trim - pdata->first_point_trim) / 281 (data->temp_error2 - data->temp_error1) + 282 pdata->first_point_trim; 283 break; 284 case TYPE_ONE_POINT_TRIMMING: 285 temp = temp_code - data->temp_error1 + pdata->first_point_trim; 286 break; 287 default: 288 temp = temp_code - pdata->default_temp_offset; 289 break; 290 } 291 292 return temp; 293 } 294 295 static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) 296 { 297 struct exynos_tmu_platform_data *pdata = data->pdata; 298 299 data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; 300 data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & 301 EXYNOS_TMU_TEMP_MASK); 302 303 if (!data->temp_error1 || 304 (pdata->min_efuse_value > data->temp_error1) || 305 (data->temp_error1 > pdata->max_efuse_value)) 306 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; 307 308 if (!data->temp_error2) 309 data->temp_error2 = 310 (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & 311 EXYNOS_TMU_TEMP_MASK; 312 } 313 314 static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling) 315 { 316 struct thermal_zone_device *tz = data->tzd; 317 const struct thermal_trip * const trips = 318 of_thermal_get_trip_points(tz); 319 unsigned long temp; 320 int i; 321 322 if (!trips) { 323 pr_err("%s: Cannot get trip points from of-thermal.c!\n", 324 __func__); 325 return 0; 326 } 327 328 for (i = 0; i < of_thermal_get_ntrips(tz); i++) { 329 if (trips[i].type == THERMAL_TRIP_CRITICAL) 330 continue; 331 332 temp = trips[i].temperature / MCELSIUS; 333 if (falling) 334 temp -= (trips[i].hysteresis / MCELSIUS); 335 else 336 threshold &= ~(0xff << 8 * i); 337 338 threshold |= temp_to_code(data, temp) << 8 * i; 339 } 340 341 return threshold; 342 } 343 344 static int exynos_tmu_initialize(struct platform_device *pdev) 345 { 346 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 347 int ret; 348 349 mutex_lock(&data->lock); 350 clk_enable(data->clk); 351 if (!IS_ERR(data->clk_sec)) 352 clk_enable(data->clk_sec); 353 ret = data->tmu_initialize(pdev); 354 clk_disable(data->clk); 355 mutex_unlock(&data->lock); 356 if (!IS_ERR(data->clk_sec)) 357 clk_disable(data->clk_sec); 358 359 return ret; 360 } 361 362 static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) 363 { 364 struct exynos_tmu_platform_data *pdata = data->pdata; 365 366 if (data->soc == SOC_ARCH_EXYNOS4412 || 367 data->soc == SOC_ARCH_EXYNOS3250) 368 con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); 369 370 con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); 371 con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; 372 373 con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 374 con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); 375 376 if (pdata->noise_cancel_mode) { 377 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); 378 con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT); 379 } 380 381 return con; 382 } 383 384 static void exynos_tmu_control(struct platform_device *pdev, bool on) 385 { 386 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 387 388 mutex_lock(&data->lock); 389 clk_enable(data->clk); 390 data->tmu_control(pdev, on); 391 clk_disable(data->clk); 392 mutex_unlock(&data->lock); 393 } 394 395 static int exynos4210_tmu_initialize(struct platform_device *pdev) 396 { 397 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 398 struct thermal_zone_device *tz = data->tzd; 399 const struct thermal_trip * const trips = 400 of_thermal_get_trip_points(tz); 401 int ret = 0, threshold_code, i; 402 unsigned long reference, temp; 403 unsigned int status; 404 405 if (!trips) { 406 pr_err("%s: Cannot get trip points from of-thermal.c!\n", 407 __func__); 408 ret = -ENODEV; 409 goto out; 410 } 411 412 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 413 if (!status) { 414 ret = -EBUSY; 415 goto out; 416 } 417 418 sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); 419 420 /* Write temperature code for threshold */ 421 reference = trips[0].temperature / MCELSIUS; 422 threshold_code = temp_to_code(data, reference); 423 if (threshold_code < 0) { 424 ret = threshold_code; 425 goto out; 426 } 427 writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); 428 429 for (i = 0; i < of_thermal_get_ntrips(tz); i++) { 430 temp = trips[i].temperature / MCELSIUS; 431 writeb(temp - reference, data->base + 432 EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4); 433 } 434 435 data->tmu_clear_irqs(data); 436 out: 437 return ret; 438 } 439 440 static int exynos4412_tmu_initialize(struct platform_device *pdev) 441 { 442 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 443 const struct thermal_trip * const trips = 444 of_thermal_get_trip_points(data->tzd); 445 unsigned int status, trim_info, con, ctrl, rising_threshold; 446 int ret = 0, threshold_code, i; 447 unsigned long crit_temp = 0; 448 449 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 450 if (!status) { 451 ret = -EBUSY; 452 goto out; 453 } 454 455 if (data->soc == SOC_ARCH_EXYNOS3250 || 456 data->soc == SOC_ARCH_EXYNOS4412 || 457 data->soc == SOC_ARCH_EXYNOS5250) { 458 if (data->soc == SOC_ARCH_EXYNOS3250) { 459 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); 460 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 461 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); 462 } 463 ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); 464 ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; 465 writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); 466 } 467 468 /* On exynos5420 the triminfo register is in the shared space */ 469 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) 470 trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); 471 else 472 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 473 474 sanitize_temp_error(data, trim_info); 475 476 /* Write temperature code for rising and falling threshold */ 477 rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE); 478 rising_threshold = get_th_reg(data, rising_threshold, false); 479 writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); 480 writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL); 481 482 data->tmu_clear_irqs(data); 483 484 /* if last threshold limit is also present */ 485 for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) { 486 if (trips[i].type == THERMAL_TRIP_CRITICAL) { 487 crit_temp = trips[i].temperature; 488 break; 489 } 490 } 491 492 if (i == of_thermal_get_ntrips(data->tzd)) { 493 pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n", 494 __func__); 495 ret = -EINVAL; 496 goto out; 497 } 498 499 threshold_code = temp_to_code(data, crit_temp / MCELSIUS); 500 /* 1-4 level to be assigned in th0 reg */ 501 rising_threshold &= ~(0xff << 8 * i); 502 rising_threshold |= threshold_code << 8 * i; 503 writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); 504 con = readl(data->base + EXYNOS_TMU_REG_CONTROL); 505 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); 506 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 507 508 out: 509 return ret; 510 } 511 512 static int exynos5433_tmu_initialize(struct platform_device *pdev) 513 { 514 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 515 struct exynos_tmu_platform_data *pdata = data->pdata; 516 struct thermal_zone_device *tz = data->tzd; 517 unsigned int status, trim_info; 518 unsigned int rising_threshold = 0, falling_threshold = 0; 519 int temp, temp_hist; 520 int ret = 0, threshold_code, i, sensor_id, cal_type; 521 522 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 523 if (!status) { 524 ret = -EBUSY; 525 goto out; 526 } 527 528 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 529 sanitize_temp_error(data, trim_info); 530 531 /* Read the temperature sensor id */ 532 sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) 533 >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; 534 dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); 535 536 /* Read the calibration mode */ 537 writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); 538 cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) 539 >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; 540 541 switch (cal_type) { 542 case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: 543 pdata->cal_type = TYPE_ONE_POINT_TRIMMING; 544 break; 545 case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: 546 pdata->cal_type = TYPE_TWO_POINT_TRIMMING; 547 break; 548 default: 549 pdata->cal_type = TYPE_ONE_POINT_TRIMMING; 550 break; 551 }; 552 553 dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", 554 cal_type ? 2 : 1); 555 556 /* Write temperature code for rising and falling threshold */ 557 for (i = 0; i < of_thermal_get_ntrips(tz); i++) { 558 int rising_reg_offset, falling_reg_offset; 559 int j = 0; 560 561 switch (i) { 562 case 0: 563 case 1: 564 case 2: 565 case 3: 566 rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0; 567 falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0; 568 j = i; 569 break; 570 case 4: 571 case 5: 572 case 6: 573 case 7: 574 rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4; 575 falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4; 576 j = i - 4; 577 break; 578 default: 579 continue; 580 } 581 582 /* Write temperature code for rising threshold */ 583 tz->ops->get_trip_temp(tz, i, &temp); 584 temp /= MCELSIUS; 585 threshold_code = temp_to_code(data, temp); 586 587 rising_threshold = readl(data->base + rising_reg_offset); 588 rising_threshold |= (threshold_code << j * 8); 589 writel(rising_threshold, data->base + rising_reg_offset); 590 591 /* Write temperature code for falling threshold */ 592 tz->ops->get_trip_hyst(tz, i, &temp_hist); 593 temp_hist = temp - (temp_hist / MCELSIUS); 594 threshold_code = temp_to_code(data, temp_hist); 595 596 falling_threshold = readl(data->base + falling_reg_offset); 597 falling_threshold &= ~(0xff << j * 8); 598 falling_threshold |= (threshold_code << j * 8); 599 writel(falling_threshold, data->base + falling_reg_offset); 600 } 601 602 data->tmu_clear_irqs(data); 603 out: 604 return ret; 605 } 606 607 static int exynos5440_tmu_initialize(struct platform_device *pdev) 608 { 609 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 610 unsigned int trim_info = 0, con, rising_threshold; 611 int ret = 0, threshold_code; 612 int crit_temp = 0; 613 614 /* 615 * For exynos5440 soc triminfo value is swapped between TMU0 and 616 * TMU2, so the below logic is needed. 617 */ 618 switch (data->id) { 619 case 0: 620 trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET + 621 EXYNOS5440_TMU_S0_7_TRIM); 622 break; 623 case 1: 624 trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM); 625 break; 626 case 2: 627 trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET + 628 EXYNOS5440_TMU_S0_7_TRIM); 629 } 630 sanitize_temp_error(data, trim_info); 631 632 /* Write temperature code for rising and falling threshold */ 633 rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0); 634 rising_threshold = get_th_reg(data, rising_threshold, false); 635 writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0); 636 writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1); 637 638 data->tmu_clear_irqs(data); 639 640 /* if last threshold limit is also present */ 641 if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) { 642 threshold_code = temp_to_code(data, crit_temp / MCELSIUS); 643 /* 5th level to be assigned in th2 reg */ 644 rising_threshold = 645 threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT; 646 writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2); 647 con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL); 648 con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); 649 writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); 650 } 651 /* Clear the PMIN in the common TMU register */ 652 if (!data->id) 653 writel(0, data->base_second + EXYNOS5440_TMU_PMIN); 654 return ret; 655 } 656 657 static int exynos7_tmu_initialize(struct platform_device *pdev) 658 { 659 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 660 struct thermal_zone_device *tz = data->tzd; 661 struct exynos_tmu_platform_data *pdata = data->pdata; 662 unsigned int status, trim_info; 663 unsigned int rising_threshold = 0, falling_threshold = 0; 664 int ret = 0, threshold_code, i; 665 int temp, temp_hist; 666 unsigned int reg_off, bit_off; 667 668 status = readb(data->base + EXYNOS_TMU_REG_STATUS); 669 if (!status) { 670 ret = -EBUSY; 671 goto out; 672 } 673 674 trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); 675 676 data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK; 677 if (!data->temp_error1 || 678 (pdata->min_efuse_value > data->temp_error1) || 679 (data->temp_error1 > pdata->max_efuse_value)) 680 data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; 681 682 /* Write temperature code for rising and falling threshold */ 683 for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) { 684 /* 685 * On exynos7 there are 4 rising and 4 falling threshold 686 * registers (0x50-0x5c and 0x60-0x6c respectively). Each 687 * register holds the value of two threshold levels (at bit 688 * offsets 0 and 16). Based on the fact that there are atmost 689 * eight possible trigger levels, calculate the register and 690 * bit offsets where the threshold levels are to be written. 691 * 692 * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50) 693 * [24:16] - Threshold level 7 694 * [8:0] - Threshold level 6 695 * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54) 696 * [24:16] - Threshold level 5 697 * [8:0] - Threshold level 4 698 * 699 * and similarly for falling thresholds. 700 * 701 * Based on the above, calculate the register and bit offsets 702 * for rising/falling threshold levels and populate them. 703 */ 704 reg_off = ((7 - i) / 2) * 4; 705 bit_off = ((8 - i) % 2); 706 707 tz->ops->get_trip_temp(tz, i, &temp); 708 temp /= MCELSIUS; 709 710 tz->ops->get_trip_hyst(tz, i, &temp_hist); 711 temp_hist = temp - (temp_hist / MCELSIUS); 712 713 /* Set 9-bit temperature code for rising threshold levels */ 714 threshold_code = temp_to_code(data, temp); 715 rising_threshold = readl(data->base + 716 EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 717 rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 718 rising_threshold |= threshold_code << (16 * bit_off); 719 writel(rising_threshold, 720 data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); 721 722 /* Set 9-bit temperature code for falling threshold levels */ 723 threshold_code = temp_to_code(data, temp_hist); 724 falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); 725 falling_threshold |= threshold_code << (16 * bit_off); 726 writel(falling_threshold, 727 data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); 728 } 729 730 data->tmu_clear_irqs(data); 731 out: 732 return ret; 733 } 734 735 static void exynos4210_tmu_control(struct platform_device *pdev, bool on) 736 { 737 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 738 struct thermal_zone_device *tz = data->tzd; 739 unsigned int con, interrupt_en; 740 741 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 742 743 if (on) { 744 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 745 interrupt_en = 746 (of_thermal_is_trip_valid(tz, 3) 747 << EXYNOS_TMU_INTEN_RISE3_SHIFT) | 748 (of_thermal_is_trip_valid(tz, 2) 749 << EXYNOS_TMU_INTEN_RISE2_SHIFT) | 750 (of_thermal_is_trip_valid(tz, 1) 751 << EXYNOS_TMU_INTEN_RISE1_SHIFT) | 752 (of_thermal_is_trip_valid(tz, 0) 753 << EXYNOS_TMU_INTEN_RISE0_SHIFT); 754 755 if (data->soc != SOC_ARCH_EXYNOS4210) 756 interrupt_en |= 757 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 758 } else { 759 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 760 interrupt_en = 0; /* Disable all interrupts */ 761 } 762 writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); 763 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 764 } 765 766 static void exynos5433_tmu_control(struct platform_device *pdev, bool on) 767 { 768 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 769 struct thermal_zone_device *tz = data->tzd; 770 unsigned int con, interrupt_en, pd_det_en; 771 772 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 773 774 if (on) { 775 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 776 interrupt_en = 777 (of_thermal_is_trip_valid(tz, 7) 778 << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | 779 (of_thermal_is_trip_valid(tz, 6) 780 << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | 781 (of_thermal_is_trip_valid(tz, 5) 782 << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | 783 (of_thermal_is_trip_valid(tz, 4) 784 << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | 785 (of_thermal_is_trip_valid(tz, 3) 786 << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | 787 (of_thermal_is_trip_valid(tz, 2) 788 << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | 789 (of_thermal_is_trip_valid(tz, 1) 790 << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | 791 (of_thermal_is_trip_valid(tz, 0) 792 << EXYNOS7_TMU_INTEN_RISE0_SHIFT); 793 794 interrupt_en |= 795 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 796 } else { 797 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 798 interrupt_en = 0; /* Disable all interrupts */ 799 } 800 801 pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; 802 803 writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); 804 writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); 805 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 806 } 807 808 static void exynos5440_tmu_control(struct platform_device *pdev, bool on) 809 { 810 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 811 struct thermal_zone_device *tz = data->tzd; 812 unsigned int con, interrupt_en; 813 814 con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL)); 815 816 if (on) { 817 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 818 interrupt_en = 819 (of_thermal_is_trip_valid(tz, 3) 820 << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) | 821 (of_thermal_is_trip_valid(tz, 2) 822 << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) | 823 (of_thermal_is_trip_valid(tz, 1) 824 << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) | 825 (of_thermal_is_trip_valid(tz, 0) 826 << EXYNOS5440_TMU_INTEN_RISE0_SHIFT); 827 interrupt_en |= 828 interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; 829 } else { 830 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 831 interrupt_en = 0; /* Disable all interrupts */ 832 } 833 writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN); 834 writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); 835 } 836 837 static void exynos7_tmu_control(struct platform_device *pdev, bool on) 838 { 839 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 840 struct thermal_zone_device *tz = data->tzd; 841 unsigned int con, interrupt_en; 842 843 con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); 844 845 if (on) { 846 con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); 847 con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); 848 interrupt_en = 849 (of_thermal_is_trip_valid(tz, 7) 850 << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | 851 (of_thermal_is_trip_valid(tz, 6) 852 << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | 853 (of_thermal_is_trip_valid(tz, 5) 854 << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | 855 (of_thermal_is_trip_valid(tz, 4) 856 << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | 857 (of_thermal_is_trip_valid(tz, 3) 858 << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | 859 (of_thermal_is_trip_valid(tz, 2) 860 << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | 861 (of_thermal_is_trip_valid(tz, 1) 862 << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | 863 (of_thermal_is_trip_valid(tz, 0) 864 << EXYNOS7_TMU_INTEN_RISE0_SHIFT); 865 866 interrupt_en |= 867 interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; 868 } else { 869 con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); 870 con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); 871 interrupt_en = 0; /* Disable all interrupts */ 872 } 873 874 writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); 875 writel(con, data->base + EXYNOS_TMU_REG_CONTROL); 876 } 877 878 static int exynos_get_temp(void *p, int *temp) 879 { 880 struct exynos_tmu_data *data = p; 881 882 if (!data || !data->tmu_read) 883 return -EINVAL; 884 885 mutex_lock(&data->lock); 886 clk_enable(data->clk); 887 888 *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS; 889 890 clk_disable(data->clk); 891 mutex_unlock(&data->lock); 892 893 return 0; 894 } 895 896 #ifdef CONFIG_THERMAL_EMULATION 897 static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, 898 int temp) 899 { 900 if (temp) { 901 temp /= MCELSIUS; 902 903 if (data->soc != SOC_ARCH_EXYNOS5440) { 904 val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); 905 val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); 906 } 907 if (data->soc == SOC_ARCH_EXYNOS7) { 908 val &= ~(EXYNOS7_EMUL_DATA_MASK << 909 EXYNOS7_EMUL_DATA_SHIFT); 910 val |= (temp_to_code(data, temp) << 911 EXYNOS7_EMUL_DATA_SHIFT) | 912 EXYNOS_EMUL_ENABLE; 913 } else { 914 val &= ~(EXYNOS_EMUL_DATA_MASK << 915 EXYNOS_EMUL_DATA_SHIFT); 916 val |= (temp_to_code(data, temp) << 917 EXYNOS_EMUL_DATA_SHIFT) | 918 EXYNOS_EMUL_ENABLE; 919 } 920 } else { 921 val &= ~EXYNOS_EMUL_ENABLE; 922 } 923 924 return val; 925 } 926 927 static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, 928 int temp) 929 { 930 unsigned int val; 931 u32 emul_con; 932 933 if (data->soc == SOC_ARCH_EXYNOS5260) 934 emul_con = EXYNOS5260_EMUL_CON; 935 else if (data->soc == SOC_ARCH_EXYNOS5433) 936 emul_con = EXYNOS5433_TMU_EMUL_CON; 937 else if (data->soc == SOC_ARCH_EXYNOS7) 938 emul_con = EXYNOS7_TMU_REG_EMUL_CON; 939 else 940 emul_con = EXYNOS_EMUL_CON; 941 942 val = readl(data->base + emul_con); 943 val = get_emul_con_reg(data, val, temp); 944 writel(val, data->base + emul_con); 945 } 946 947 static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data, 948 int temp) 949 { 950 unsigned int val; 951 952 val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG); 953 val = get_emul_con_reg(data, val, temp); 954 writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG); 955 } 956 957 static int exynos_tmu_set_emulation(void *drv_data, int temp) 958 { 959 struct exynos_tmu_data *data = drv_data; 960 int ret = -EINVAL; 961 962 if (data->soc == SOC_ARCH_EXYNOS4210) 963 goto out; 964 965 if (temp && temp < MCELSIUS) 966 goto out; 967 968 mutex_lock(&data->lock); 969 clk_enable(data->clk); 970 data->tmu_set_emulation(data, temp); 971 clk_disable(data->clk); 972 mutex_unlock(&data->lock); 973 return 0; 974 out: 975 return ret; 976 } 977 #else 978 #define exynos4412_tmu_set_emulation NULL 979 #define exynos5440_tmu_set_emulation NULL 980 static int exynos_tmu_set_emulation(void *drv_data, int temp) 981 { return -EINVAL; } 982 #endif /* CONFIG_THERMAL_EMULATION */ 983 984 static int exynos4210_tmu_read(struct exynos_tmu_data *data) 985 { 986 int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 987 988 /* "temp_code" should range between 75 and 175 */ 989 return (ret < 75 || ret > 175) ? -ENODATA : ret; 990 } 991 992 static int exynos4412_tmu_read(struct exynos_tmu_data *data) 993 { 994 return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); 995 } 996 997 static int exynos5440_tmu_read(struct exynos_tmu_data *data) 998 { 999 return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP); 1000 } 1001 1002 static int exynos7_tmu_read(struct exynos_tmu_data *data) 1003 { 1004 return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & 1005 EXYNOS7_TMU_TEMP_MASK; 1006 } 1007 1008 static void exynos_tmu_work(struct work_struct *work) 1009 { 1010 struct exynos_tmu_data *data = container_of(work, 1011 struct exynos_tmu_data, irq_work); 1012 unsigned int val_type; 1013 1014 if (!IS_ERR(data->clk_sec)) 1015 clk_enable(data->clk_sec); 1016 /* Find which sensor generated this interrupt */ 1017 if (data->soc == SOC_ARCH_EXYNOS5440) { 1018 val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS); 1019 if (!((val_type >> data->id) & 0x1)) 1020 goto out; 1021 } 1022 if (!IS_ERR(data->clk_sec)) 1023 clk_disable(data->clk_sec); 1024 1025 exynos_report_trigger(data); 1026 mutex_lock(&data->lock); 1027 clk_enable(data->clk); 1028 1029 /* TODO: take action based on particular interrupt */ 1030 data->tmu_clear_irqs(data); 1031 1032 clk_disable(data->clk); 1033 mutex_unlock(&data->lock); 1034 out: 1035 enable_irq(data->irq); 1036 } 1037 1038 static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) 1039 { 1040 unsigned int val_irq; 1041 u32 tmu_intstat, tmu_intclear; 1042 1043 if (data->soc == SOC_ARCH_EXYNOS5260) { 1044 tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; 1045 tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; 1046 } else if (data->soc == SOC_ARCH_EXYNOS7) { 1047 tmu_intstat = EXYNOS7_TMU_REG_INTPEND; 1048 tmu_intclear = EXYNOS7_TMU_REG_INTPEND; 1049 } else if (data->soc == SOC_ARCH_EXYNOS5433) { 1050 tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; 1051 tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; 1052 } else { 1053 tmu_intstat = EXYNOS_TMU_REG_INTSTAT; 1054 tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; 1055 } 1056 1057 val_irq = readl(data->base + tmu_intstat); 1058 /* 1059 * Clear the interrupts. Please note that the documentation for 1060 * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly 1061 * states that INTCLEAR register has a different placing of bits 1062 * responsible for FALL IRQs than INTSTAT register. Exynos5420 1063 * and Exynos5440 documentation is correct (Exynos4210 doesn't 1064 * support FALL IRQs at all). 1065 */ 1066 writel(val_irq, data->base + tmu_intclear); 1067 } 1068 1069 static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data) 1070 { 1071 unsigned int val_irq; 1072 1073 val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ); 1074 /* clear the interrupts */ 1075 writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ); 1076 } 1077 1078 static irqreturn_t exynos_tmu_irq(int irq, void *id) 1079 { 1080 struct exynos_tmu_data *data = id; 1081 1082 disable_irq_nosync(irq); 1083 schedule_work(&data->irq_work); 1084 1085 return IRQ_HANDLED; 1086 } 1087 1088 static const struct of_device_id exynos_tmu_match[] = { 1089 { .compatible = "samsung,exynos3250-tmu", }, 1090 { .compatible = "samsung,exynos4210-tmu", }, 1091 { .compatible = "samsung,exynos4412-tmu", }, 1092 { .compatible = "samsung,exynos5250-tmu", }, 1093 { .compatible = "samsung,exynos5260-tmu", }, 1094 { .compatible = "samsung,exynos5420-tmu", }, 1095 { .compatible = "samsung,exynos5420-tmu-ext-triminfo", }, 1096 { .compatible = "samsung,exynos5433-tmu", }, 1097 { .compatible = "samsung,exynos5440-tmu", }, 1098 { .compatible = "samsung,exynos7-tmu", }, 1099 { /* sentinel */ }, 1100 }; 1101 MODULE_DEVICE_TABLE(of, exynos_tmu_match); 1102 1103 static int exynos_of_get_soc_type(struct device_node *np) 1104 { 1105 if (of_device_is_compatible(np, "samsung,exynos3250-tmu")) 1106 return SOC_ARCH_EXYNOS3250; 1107 else if (of_device_is_compatible(np, "samsung,exynos4210-tmu")) 1108 return SOC_ARCH_EXYNOS4210; 1109 else if (of_device_is_compatible(np, "samsung,exynos4412-tmu")) 1110 return SOC_ARCH_EXYNOS4412; 1111 else if (of_device_is_compatible(np, "samsung,exynos5250-tmu")) 1112 return SOC_ARCH_EXYNOS5250; 1113 else if (of_device_is_compatible(np, "samsung,exynos5260-tmu")) 1114 return SOC_ARCH_EXYNOS5260; 1115 else if (of_device_is_compatible(np, "samsung,exynos5420-tmu")) 1116 return SOC_ARCH_EXYNOS5420; 1117 else if (of_device_is_compatible(np, 1118 "samsung,exynos5420-tmu-ext-triminfo")) 1119 return SOC_ARCH_EXYNOS5420_TRIMINFO; 1120 else if (of_device_is_compatible(np, "samsung,exynos5433-tmu")) 1121 return SOC_ARCH_EXYNOS5433; 1122 else if (of_device_is_compatible(np, "samsung,exynos5440-tmu")) 1123 return SOC_ARCH_EXYNOS5440; 1124 else if (of_device_is_compatible(np, "samsung,exynos7-tmu")) 1125 return SOC_ARCH_EXYNOS7; 1126 1127 return -EINVAL; 1128 } 1129 1130 static int exynos_of_sensor_conf(struct device_node *np, 1131 struct exynos_tmu_platform_data *pdata) 1132 { 1133 u32 value; 1134 int ret; 1135 1136 of_node_get(np); 1137 1138 ret = of_property_read_u32(np, "samsung,tmu_gain", &value); 1139 pdata->gain = (u8)value; 1140 of_property_read_u32(np, "samsung,tmu_reference_voltage", &value); 1141 pdata->reference_voltage = (u8)value; 1142 of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value); 1143 pdata->noise_cancel_mode = (u8)value; 1144 1145 of_property_read_u32(np, "samsung,tmu_efuse_value", 1146 &pdata->efuse_value); 1147 of_property_read_u32(np, "samsung,tmu_min_efuse_value", 1148 &pdata->min_efuse_value); 1149 of_property_read_u32(np, "samsung,tmu_max_efuse_value", 1150 &pdata->max_efuse_value); 1151 1152 of_property_read_u32(np, "samsung,tmu_first_point_trim", &value); 1153 pdata->first_point_trim = (u8)value; 1154 of_property_read_u32(np, "samsung,tmu_second_point_trim", &value); 1155 pdata->second_point_trim = (u8)value; 1156 of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value); 1157 pdata->default_temp_offset = (u8)value; 1158 1159 of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type); 1160 of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode); 1161 1162 of_node_put(np); 1163 return 0; 1164 } 1165 1166 static int exynos_map_dt_data(struct platform_device *pdev) 1167 { 1168 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 1169 struct exynos_tmu_platform_data *pdata; 1170 struct resource res; 1171 int ret; 1172 1173 if (!data || !pdev->dev.of_node) 1174 return -ENODEV; 1175 1176 /* 1177 * Try enabling the regulator if found 1178 * TODO: Add regulator as an SOC feature, so that regulator enable 1179 * is a compulsory call. 1180 */ 1181 data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); 1182 if (!IS_ERR(data->regulator)) { 1183 ret = regulator_enable(data->regulator); 1184 if (ret) { 1185 dev_err(&pdev->dev, "failed to enable vtmu\n"); 1186 return ret; 1187 } 1188 } else { 1189 dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); 1190 } 1191 1192 data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); 1193 if (data->id < 0) 1194 data->id = 0; 1195 1196 data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 1197 if (data->irq <= 0) { 1198 dev_err(&pdev->dev, "failed to get IRQ\n"); 1199 return -ENODEV; 1200 } 1201 1202 if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { 1203 dev_err(&pdev->dev, "failed to get Resource 0\n"); 1204 return -ENODEV; 1205 } 1206 1207 data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); 1208 if (!data->base) { 1209 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 1210 return -EADDRNOTAVAIL; 1211 } 1212 1213 pdata = devm_kzalloc(&pdev->dev, 1214 sizeof(struct exynos_tmu_platform_data), 1215 GFP_KERNEL); 1216 if (!pdata) 1217 return -ENOMEM; 1218 1219 exynos_of_sensor_conf(pdev->dev.of_node, pdata); 1220 data->pdata = pdata; 1221 data->soc = exynos_of_get_soc_type(pdev->dev.of_node); 1222 1223 switch (data->soc) { 1224 case SOC_ARCH_EXYNOS4210: 1225 data->tmu_initialize = exynos4210_tmu_initialize; 1226 data->tmu_control = exynos4210_tmu_control; 1227 data->tmu_read = exynos4210_tmu_read; 1228 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 1229 break; 1230 case SOC_ARCH_EXYNOS3250: 1231 case SOC_ARCH_EXYNOS4412: 1232 case SOC_ARCH_EXYNOS5250: 1233 case SOC_ARCH_EXYNOS5260: 1234 case SOC_ARCH_EXYNOS5420: 1235 case SOC_ARCH_EXYNOS5420_TRIMINFO: 1236 data->tmu_initialize = exynos4412_tmu_initialize; 1237 data->tmu_control = exynos4210_tmu_control; 1238 data->tmu_read = exynos4412_tmu_read; 1239 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 1240 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 1241 break; 1242 case SOC_ARCH_EXYNOS5433: 1243 data->tmu_initialize = exynos5433_tmu_initialize; 1244 data->tmu_control = exynos5433_tmu_control; 1245 data->tmu_read = exynos4412_tmu_read; 1246 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 1247 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 1248 break; 1249 case SOC_ARCH_EXYNOS5440: 1250 data->tmu_initialize = exynos5440_tmu_initialize; 1251 data->tmu_control = exynos5440_tmu_control; 1252 data->tmu_read = exynos5440_tmu_read; 1253 data->tmu_set_emulation = exynos5440_tmu_set_emulation; 1254 data->tmu_clear_irqs = exynos5440_tmu_clear_irqs; 1255 break; 1256 case SOC_ARCH_EXYNOS7: 1257 data->tmu_initialize = exynos7_tmu_initialize; 1258 data->tmu_control = exynos7_tmu_control; 1259 data->tmu_read = exynos7_tmu_read; 1260 data->tmu_set_emulation = exynos4412_tmu_set_emulation; 1261 data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; 1262 break; 1263 default: 1264 dev_err(&pdev->dev, "Platform not supported\n"); 1265 return -EINVAL; 1266 } 1267 1268 /* 1269 * Check if the TMU shares some registers and then try to map the 1270 * memory of common registers. 1271 */ 1272 if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO && 1273 data->soc != SOC_ARCH_EXYNOS5440) 1274 return 0; 1275 1276 if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { 1277 dev_err(&pdev->dev, "failed to get Resource 1\n"); 1278 return -ENODEV; 1279 } 1280 1281 data->base_second = devm_ioremap(&pdev->dev, res.start, 1282 resource_size(&res)); 1283 if (!data->base_second) { 1284 dev_err(&pdev->dev, "Failed to ioremap memory\n"); 1285 return -ENOMEM; 1286 } 1287 1288 return 0; 1289 } 1290 1291 static struct thermal_zone_of_device_ops exynos_sensor_ops = { 1292 .get_temp = exynos_get_temp, 1293 .set_emul_temp = exynos_tmu_set_emulation, 1294 }; 1295 1296 static int exynos_tmu_probe(struct platform_device *pdev) 1297 { 1298 struct exynos_tmu_data *data; 1299 int ret; 1300 1301 data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), 1302 GFP_KERNEL); 1303 if (!data) 1304 return -ENOMEM; 1305 1306 platform_set_drvdata(pdev, data); 1307 mutex_init(&data->lock); 1308 1309 data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data, 1310 &exynos_sensor_ops); 1311 if (IS_ERR(data->tzd)) { 1312 pr_err("thermal: tz: %p ERROR\n", data->tzd); 1313 return PTR_ERR(data->tzd); 1314 } 1315 ret = exynos_map_dt_data(pdev); 1316 if (ret) 1317 goto err_sensor; 1318 1319 INIT_WORK(&data->irq_work, exynos_tmu_work); 1320 1321 data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); 1322 if (IS_ERR(data->clk)) { 1323 dev_err(&pdev->dev, "Failed to get clock\n"); 1324 ret = PTR_ERR(data->clk); 1325 goto err_sensor; 1326 } 1327 1328 data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); 1329 if (IS_ERR(data->clk_sec)) { 1330 if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { 1331 dev_err(&pdev->dev, "Failed to get triminfo clock\n"); 1332 ret = PTR_ERR(data->clk_sec); 1333 goto err_sensor; 1334 } 1335 } else { 1336 ret = clk_prepare(data->clk_sec); 1337 if (ret) { 1338 dev_err(&pdev->dev, "Failed to get clock\n"); 1339 goto err_sensor; 1340 } 1341 } 1342 1343 ret = clk_prepare(data->clk); 1344 if (ret) { 1345 dev_err(&pdev->dev, "Failed to get clock\n"); 1346 goto err_clk_sec; 1347 } 1348 1349 switch (data->soc) { 1350 case SOC_ARCH_EXYNOS5433: 1351 case SOC_ARCH_EXYNOS7: 1352 data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); 1353 if (IS_ERR(data->sclk)) { 1354 dev_err(&pdev->dev, "Failed to get sclk\n"); 1355 goto err_clk; 1356 } else { 1357 ret = clk_prepare_enable(data->sclk); 1358 if (ret) { 1359 dev_err(&pdev->dev, "Failed to enable sclk\n"); 1360 goto err_clk; 1361 } 1362 } 1363 break; 1364 default: 1365 break; 1366 }; 1367 1368 ret = exynos_tmu_initialize(pdev); 1369 if (ret) { 1370 dev_err(&pdev->dev, "Failed to initialize TMU\n"); 1371 goto err_sclk; 1372 } 1373 1374 ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, 1375 IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); 1376 if (ret) { 1377 dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); 1378 goto err_sclk; 1379 } 1380 1381 exynos_tmu_control(pdev, true); 1382 return 0; 1383 err_sclk: 1384 clk_disable_unprepare(data->sclk); 1385 err_clk: 1386 clk_unprepare(data->clk); 1387 err_clk_sec: 1388 if (!IS_ERR(data->clk_sec)) 1389 clk_unprepare(data->clk_sec); 1390 err_sensor: 1391 if (!IS_ERR_OR_NULL(data->regulator)) 1392 regulator_disable(data->regulator); 1393 thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd); 1394 1395 return ret; 1396 } 1397 1398 static int exynos_tmu_remove(struct platform_device *pdev) 1399 { 1400 struct exynos_tmu_data *data = platform_get_drvdata(pdev); 1401 struct thermal_zone_device *tzd = data->tzd; 1402 1403 thermal_zone_of_sensor_unregister(&pdev->dev, tzd); 1404 exynos_tmu_control(pdev, false); 1405 1406 clk_disable_unprepare(data->sclk); 1407 clk_unprepare(data->clk); 1408 if (!IS_ERR(data->clk_sec)) 1409 clk_unprepare(data->clk_sec); 1410 1411 if (!IS_ERR(data->regulator)) 1412 regulator_disable(data->regulator); 1413 1414 return 0; 1415 } 1416 1417 #ifdef CONFIG_PM_SLEEP 1418 static int exynos_tmu_suspend(struct device *dev) 1419 { 1420 exynos_tmu_control(to_platform_device(dev), false); 1421 1422 return 0; 1423 } 1424 1425 static int exynos_tmu_resume(struct device *dev) 1426 { 1427 struct platform_device *pdev = to_platform_device(dev); 1428 1429 exynos_tmu_initialize(pdev); 1430 exynos_tmu_control(pdev, true); 1431 1432 return 0; 1433 } 1434 1435 static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, 1436 exynos_tmu_suspend, exynos_tmu_resume); 1437 #define EXYNOS_TMU_PM (&exynos_tmu_pm) 1438 #else 1439 #define EXYNOS_TMU_PM NULL 1440 #endif 1441 1442 static struct platform_driver exynos_tmu_driver = { 1443 .driver = { 1444 .name = "exynos-tmu", 1445 .pm = EXYNOS_TMU_PM, 1446 .of_match_table = exynos_tmu_match, 1447 }, 1448 .probe = exynos_tmu_probe, 1449 .remove = exynos_tmu_remove, 1450 }; 1451 1452 module_platform_driver(exynos_tmu_driver); 1453 1454 MODULE_DESCRIPTION("EXYNOS TMU Driver"); 1455 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); 1456 MODULE_LICENSE("GPL"); 1457 MODULE_ALIAS("platform:exynos-tmu"); 1458