xref: /linux/drivers/thermal/qcom/qcom-spmi-temp-alarm.c (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/bitops.h>
7 #include <linux/delay.h>
8 #include <linux/err.h>
9 #include <linux/iio/consumer.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/regmap.h>
15 #include <linux/thermal.h>
16 
17 #include "../thermal_hwmon.h"
18 
19 #define QPNP_TM_REG_DIG_MAJOR		0x01
20 #define QPNP_TM_REG_TYPE		0x04
21 #define QPNP_TM_REG_SUBTYPE		0x05
22 #define QPNP_TM_REG_STATUS		0x08
23 #define QPNP_TM_REG_SHUTDOWN_CTRL1	0x40
24 #define QPNP_TM_REG_ALARM_CTRL		0x46
25 
26 #define QPNP_TM_TYPE			0x09
27 #define QPNP_TM_SUBTYPE_GEN1		0x08
28 #define QPNP_TM_SUBTYPE_GEN2		0x09
29 
30 #define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
31 #define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
32 #define STATUS_GEN2_STATE_SHIFT		4
33 
34 #define SHUTDOWN_CTRL1_OVERRIDE_S2	BIT(6)
35 #define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
36 
37 #define SHUTDOWN_CTRL1_RATE_25HZ	BIT(3)
38 
39 #define ALARM_CTRL_FORCE_ENABLE		BIT(7)
40 
41 #define THRESH_COUNT			4
42 #define STAGE_COUNT			3
43 
44 /* Over-temperature trip point values in mC */
45 static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
46 	{ 105000, 125000, 145000 },
47 	{ 110000, 130000, 150000 },
48 	{ 115000, 135000, 155000 },
49 	{ 120000, 140000, 160000 },
50 };
51 
52 static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
53 	{  90000, 110000, 140000 },
54 	{  95000, 115000, 145000 },
55 	{ 100000, 120000, 150000 },
56 	{ 105000, 125000, 155000 },
57 };
58 
59 #define TEMP_THRESH_STEP		5000 /* Threshold step: 5 C */
60 
61 #define THRESH_MIN			0
62 #define THRESH_MAX			3
63 
64 #define TEMP_STAGE_HYSTERESIS		2000
65 
66 /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
67 #define DEFAULT_TEMP			37000
68 
69 struct qpnp_tm_chip {
70 	struct regmap			*map;
71 	struct device			*dev;
72 	struct thermal_zone_device	*tz_dev;
73 	unsigned int			subtype;
74 	long				temp;
75 	unsigned int			thresh;
76 	unsigned int			stage;
77 	unsigned int			prev_stage;
78 	unsigned int			base;
79 	/* protects .thresh, .stage and chip registers */
80 	struct mutex			lock;
81 	bool				initialized;
82 
83 	struct iio_channel		*adc;
84 	const long			(*temp_map)[THRESH_COUNT][STAGE_COUNT];
85 };
86 
87 /* This array maps from GEN2 alarm state to GEN1 alarm stage */
88 static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
89 
90 static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
91 {
92 	unsigned int val;
93 	int ret;
94 
95 	ret = regmap_read(chip->map, chip->base + addr, &val);
96 	if (ret < 0)
97 		return ret;
98 
99 	*data = val;
100 	return 0;
101 }
102 
103 static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
104 {
105 	return regmap_write(chip->map, chip->base + addr, data);
106 }
107 
108 /**
109  * qpnp_tm_decode_temp() - return temperature in mC corresponding to the
110  *		specified over-temperature stage
111  * @chip:		Pointer to the qpnp_tm chip
112  * @stage:		Over-temperature stage
113  *
114  * Return: temperature in mC
115  */
116 static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
117 {
118 	if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
119 	    stage > STAGE_COUNT)
120 		return 0;
121 
122 	return (*chip->temp_map)[chip->thresh][stage - 1];
123 }
124 
125 /**
126  * qpnp_tm_get_temp_stage() - return over-temperature stage
127  * @chip:		Pointer to the qpnp_tm chip
128  *
129  * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
130  */
131 static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
132 {
133 	int ret;
134 	u8 reg = 0;
135 
136 	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
137 	if (ret < 0)
138 		return ret;
139 
140 	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
141 		ret = reg & STATUS_GEN1_STAGE_MASK;
142 	else
143 		ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
144 
145 	return ret;
146 }
147 
148 /*
149  * This function updates the internal temp value based on the
150  * current thermal stage and threshold as well as the previous stage
151  */
152 static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
153 {
154 	unsigned int stage, stage_new, stage_old;
155 	int ret;
156 
157 	WARN_ON(!mutex_is_locked(&chip->lock));
158 
159 	ret = qpnp_tm_get_temp_stage(chip);
160 	if (ret < 0)
161 		return ret;
162 	stage = ret;
163 
164 	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
165 		stage_new = stage;
166 		stage_old = chip->stage;
167 	} else {
168 		stage_new = alarm_state_map[stage];
169 		stage_old = alarm_state_map[chip->stage];
170 	}
171 
172 	if (stage_new > stage_old) {
173 		/* increasing stage, use lower bound */
174 		chip->temp = qpnp_tm_decode_temp(chip, stage_new)
175 				+ TEMP_STAGE_HYSTERESIS;
176 	} else if (stage_new < stage_old) {
177 		/* decreasing stage, use upper bound */
178 		chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
179 				- TEMP_STAGE_HYSTERESIS;
180 	}
181 
182 	chip->stage = stage;
183 
184 	return 0;
185 }
186 
187 static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
188 {
189 	struct qpnp_tm_chip *chip = thermal_zone_device_priv(tz);
190 	int ret, mili_celsius;
191 
192 	if (!temp)
193 		return -EINVAL;
194 
195 	if (!chip->initialized) {
196 		*temp = DEFAULT_TEMP;
197 		return 0;
198 	}
199 
200 	if (!chip->adc) {
201 		mutex_lock(&chip->lock);
202 		ret = qpnp_tm_update_temp_no_adc(chip);
203 		mutex_unlock(&chip->lock);
204 		if (ret < 0)
205 			return ret;
206 	} else {
207 		ret = iio_read_channel_processed(chip->adc, &mili_celsius);
208 		if (ret < 0)
209 			return ret;
210 
211 		chip->temp = mili_celsius;
212 	}
213 
214 	*temp = chip->temp;
215 
216 	return 0;
217 }
218 
219 static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
220 					     int temp)
221 {
222 	long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
223 	long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
224 	bool disable_s2_shutdown = false;
225 	u8 reg;
226 
227 	WARN_ON(!mutex_is_locked(&chip->lock));
228 
229 	/*
230 	 * Default: S2 and S3 shutdown enabled, thresholds at
231 	 * lowest threshold set, monitoring at 25Hz
232 	 */
233 	reg = SHUTDOWN_CTRL1_RATE_25HZ;
234 
235 	if (temp == THERMAL_TEMP_INVALID ||
236 	    temp < stage2_threshold_min) {
237 		chip->thresh = THRESH_MIN;
238 		goto skip;
239 	}
240 
241 	if (temp <= stage2_threshold_max) {
242 		chip->thresh = THRESH_MAX -
243 			((stage2_threshold_max - temp) /
244 			 TEMP_THRESH_STEP);
245 		disable_s2_shutdown = true;
246 	} else {
247 		chip->thresh = THRESH_MAX;
248 
249 		if (chip->adc)
250 			disable_s2_shutdown = true;
251 		else
252 			dev_warn(chip->dev,
253 				 "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
254 				 temp, stage2_threshold_max, stage2_threshold_max);
255 	}
256 
257 skip:
258 	reg |= chip->thresh;
259 	if (disable_s2_shutdown)
260 		reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
261 
262 	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
263 }
264 
265 static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip_id, int temp)
266 {
267 	struct qpnp_tm_chip *chip = thermal_zone_device_priv(tz);
268 	struct thermal_trip trip;
269 	int ret;
270 
271 	ret = __thermal_zone_get_trip(chip->tz_dev, trip_id, &trip);
272 	if (ret)
273 		return ret;
274 
275 	if (trip.type != THERMAL_TRIP_CRITICAL)
276 		return 0;
277 
278 	mutex_lock(&chip->lock);
279 	ret = qpnp_tm_update_critical_trip_temp(chip, temp);
280 	mutex_unlock(&chip->lock);
281 
282 	return ret;
283 }
284 
285 static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = {
286 	.get_temp = qpnp_tm_get_temp,
287 	.set_trip_temp = qpnp_tm_set_trip_temp,
288 };
289 
290 static irqreturn_t qpnp_tm_isr(int irq, void *data)
291 {
292 	struct qpnp_tm_chip *chip = data;
293 
294 	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
295 
296 	return IRQ_HANDLED;
297 }
298 
299 static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
300 {
301 	struct thermal_trip trip;
302 	int i, ret;
303 
304 	for (i = 0; i < thermal_zone_get_num_trips(chip->tz_dev); i++) {
305 
306 		ret = thermal_zone_get_trip(chip->tz_dev, i, &trip);
307 		if (ret)
308 			continue;
309 
310 		if (trip.type == THERMAL_TRIP_CRITICAL)
311 			return trip.temperature;
312 	}
313 
314 	return THERMAL_TEMP_INVALID;
315 }
316 
317 /*
318  * This function initializes the internal temp value based on only the
319  * current thermal stage and threshold. Setup threshold control and
320  * disable shutdown override.
321  */
322 static int qpnp_tm_init(struct qpnp_tm_chip *chip)
323 {
324 	unsigned int stage;
325 	int ret;
326 	u8 reg = 0;
327 	int crit_temp;
328 
329 	mutex_lock(&chip->lock);
330 
331 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
332 	if (ret < 0)
333 		goto out;
334 
335 	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
336 	chip->temp = DEFAULT_TEMP;
337 
338 	ret = qpnp_tm_get_temp_stage(chip);
339 	if (ret < 0)
340 		goto out;
341 	chip->stage = ret;
342 
343 	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
344 		? chip->stage : alarm_state_map[chip->stage];
345 
346 	if (stage)
347 		chip->temp = qpnp_tm_decode_temp(chip, stage);
348 
349 	mutex_unlock(&chip->lock);
350 
351 	crit_temp = qpnp_tm_get_critical_trip_temp(chip);
352 
353 	mutex_lock(&chip->lock);
354 
355 	ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
356 	if (ret < 0)
357 		goto out;
358 
359 	/* Enable the thermal alarm PMIC module in always-on mode. */
360 	reg = ALARM_CTRL_FORCE_ENABLE;
361 	ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
362 
363 	chip->initialized = true;
364 
365 out:
366 	mutex_unlock(&chip->lock);
367 	return ret;
368 }
369 
370 static int qpnp_tm_probe(struct platform_device *pdev)
371 {
372 	struct qpnp_tm_chip *chip;
373 	struct device_node *node;
374 	u8 type, subtype, dig_major;
375 	u32 res;
376 	int ret, irq;
377 
378 	node = pdev->dev.of_node;
379 
380 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
381 	if (!chip)
382 		return -ENOMEM;
383 
384 	dev_set_drvdata(&pdev->dev, chip);
385 	chip->dev = &pdev->dev;
386 
387 	mutex_init(&chip->lock);
388 
389 	chip->map = dev_get_regmap(pdev->dev.parent, NULL);
390 	if (!chip->map)
391 		return -ENXIO;
392 
393 	ret = of_property_read_u32(node, "reg", &res);
394 	if (ret < 0)
395 		return ret;
396 
397 	irq = platform_get_irq(pdev, 0);
398 	if (irq < 0)
399 		return irq;
400 
401 	/* ADC based measurements are optional */
402 	chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
403 	if (IS_ERR(chip->adc)) {
404 		ret = PTR_ERR(chip->adc);
405 		chip->adc = NULL;
406 		if (ret == -EPROBE_DEFER)
407 			return ret;
408 	}
409 
410 	chip->base = res;
411 
412 	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
413 	if (ret < 0)
414 		return dev_err_probe(&pdev->dev, ret,
415 				     "could not read type\n");
416 
417 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
418 	if (ret < 0)
419 		return dev_err_probe(&pdev->dev, ret,
420 				     "could not read subtype\n");
421 
422 	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
423 	if (ret < 0)
424 		return dev_err_probe(&pdev->dev, ret,
425 				     "could not read dig_major\n");
426 
427 	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
428 				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
429 		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
430 			type, subtype);
431 		return -ENODEV;
432 	}
433 
434 	chip->subtype = subtype;
435 	if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
436 		chip->temp_map = &temp_map_gen2_v1;
437 	else
438 		chip->temp_map = &temp_map_gen1;
439 
440 	/*
441 	 * Register the sensor before initializing the hardware to be able to
442 	 * read the trip points. get_temp() returns the default temperature
443 	 * before the hardware initialization is completed.
444 	 */
445 	chip->tz_dev = devm_thermal_of_zone_register(
446 		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
447 	if (IS_ERR(chip->tz_dev))
448 		return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
449 				     "failed to register sensor\n");
450 
451 	ret = qpnp_tm_init(chip);
452 	if (ret < 0)
453 		return dev_err_probe(&pdev->dev, ret, "init failed\n");
454 
455 	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
456 
457 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
458 					IRQF_ONESHOT, node->name, chip);
459 	if (ret < 0)
460 		return ret;
461 
462 	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
463 
464 	return 0;
465 }
466 
467 static const struct of_device_id qpnp_tm_match_table[] = {
468 	{ .compatible = "qcom,spmi-temp-alarm" },
469 	{ }
470 };
471 MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
472 
473 static struct platform_driver qpnp_tm_driver = {
474 	.driver = {
475 		.name = "spmi-temp-alarm",
476 		.of_match_table = qpnp_tm_match_table,
477 	},
478 	.probe  = qpnp_tm_probe,
479 };
480 module_platform_driver(qpnp_tm_driver);
481 
482 MODULE_ALIAS("platform:spmi-temp-alarm");
483 MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
484 MODULE_LICENSE("GPL v2");
485