xref: /linux/drivers/thermal/qcom/qcom-spmi-temp-alarm.c (revision 8e1bb4a41aa78d6105e59186af3dcd545fc66e70)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/bitops.h>
7 #include <linux/delay.h>
8 #include <linux/err.h>
9 #include <linux/iio/consumer.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/regmap.h>
15 #include <linux/thermal.h>
16 
17 #include "../thermal_hwmon.h"
18 
19 #define QPNP_TM_REG_DIG_MAJOR		0x01
20 #define QPNP_TM_REG_TYPE		0x04
21 #define QPNP_TM_REG_SUBTYPE		0x05
22 #define QPNP_TM_REG_STATUS		0x08
23 #define QPNP_TM_REG_SHUTDOWN_CTRL1	0x40
24 #define QPNP_TM_REG_ALARM_CTRL		0x46
25 
26 #define QPNP_TM_TYPE			0x09
27 #define QPNP_TM_SUBTYPE_GEN1		0x08
28 #define QPNP_TM_SUBTYPE_GEN2		0x09
29 
30 #define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
31 #define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
32 #define STATUS_GEN2_STATE_SHIFT		4
33 
34 #define SHUTDOWN_CTRL1_OVERRIDE_S2	BIT(6)
35 #define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
36 
37 #define SHUTDOWN_CTRL1_RATE_25HZ	BIT(3)
38 
39 #define ALARM_CTRL_FORCE_ENABLE		BIT(7)
40 
41 #define THRESH_COUNT			4
42 #define STAGE_COUNT			3
43 
44 /* Over-temperature trip point values in mC */
45 static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
46 	{ 105000, 125000, 145000 },
47 	{ 110000, 130000, 150000 },
48 	{ 115000, 135000, 155000 },
49 	{ 120000, 140000, 160000 },
50 };
51 
52 static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
53 	{  90000, 110000, 140000 },
54 	{  95000, 115000, 145000 },
55 	{ 100000, 120000, 150000 },
56 	{ 105000, 125000, 155000 },
57 };
58 
59 #define TEMP_THRESH_STEP		5000 /* Threshold step: 5 C */
60 
61 #define THRESH_MIN			0
62 #define THRESH_MAX			3
63 
64 #define TEMP_STAGE_HYSTERESIS		2000
65 
66 /* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
67 #define DEFAULT_TEMP			37000
68 
69 struct qpnp_tm_chip {
70 	struct regmap			*map;
71 	struct device			*dev;
72 	struct thermal_zone_device	*tz_dev;
73 	unsigned int			subtype;
74 	long				temp;
75 	unsigned int			thresh;
76 	unsigned int			stage;
77 	unsigned int			base;
78 	/* protects .thresh, .stage and chip registers */
79 	struct mutex			lock;
80 	bool				initialized;
81 
82 	struct iio_channel		*adc;
83 	const long			(*temp_map)[THRESH_COUNT][STAGE_COUNT];
84 };
85 
86 /* This array maps from GEN2 alarm state to GEN1 alarm stage */
87 static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3};
88 
89 static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data)
90 {
91 	unsigned int val;
92 	int ret;
93 
94 	ret = regmap_read(chip->map, chip->base + addr, &val);
95 	if (ret < 0)
96 		return ret;
97 
98 	*data = val;
99 	return 0;
100 }
101 
102 static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
103 {
104 	return regmap_write(chip->map, chip->base + addr, data);
105 }
106 
107 /**
108  * qpnp_tm_decode_temp() - return temperature in mC corresponding to the
109  *		specified over-temperature stage
110  * @chip:		Pointer to the qpnp_tm chip
111  * @stage:		Over-temperature stage
112  *
113  * Return: temperature in mC
114  */
115 static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
116 {
117 	if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
118 	    stage > STAGE_COUNT)
119 		return 0;
120 
121 	return (*chip->temp_map)[chip->thresh][stage - 1];
122 }
123 
124 /**
125  * qpnp_tm_get_temp_stage() - return over-temperature stage
126  * @chip:		Pointer to the qpnp_tm chip
127  *
128  * Return: stage (GEN1) or state (GEN2) on success, or errno on failure.
129  */
130 static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
131 {
132 	int ret;
133 	u8 reg = 0;
134 
135 	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
136 	if (ret < 0)
137 		return ret;
138 
139 	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
140 		ret = reg & STATUS_GEN1_STAGE_MASK;
141 	else
142 		ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT;
143 
144 	return ret;
145 }
146 
147 /*
148  * This function updates the internal temp value based on the
149  * current thermal stage and threshold as well as the previous stage
150  */
151 static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
152 {
153 	unsigned int stage, stage_new, stage_old;
154 	int ret;
155 
156 	WARN_ON(!mutex_is_locked(&chip->lock));
157 
158 	ret = qpnp_tm_get_temp_stage(chip);
159 	if (ret < 0)
160 		return ret;
161 	stage = ret;
162 
163 	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
164 		stage_new = stage;
165 		stage_old = chip->stage;
166 	} else {
167 		stage_new = alarm_state_map[stage];
168 		stage_old = alarm_state_map[chip->stage];
169 	}
170 
171 	if (stage_new > stage_old) {
172 		/* increasing stage, use lower bound */
173 		chip->temp = qpnp_tm_decode_temp(chip, stage_new)
174 				+ TEMP_STAGE_HYSTERESIS;
175 	} else if (stage_new < stage_old) {
176 		/* decreasing stage, use upper bound */
177 		chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
178 				- TEMP_STAGE_HYSTERESIS;
179 	}
180 
181 	chip->stage = stage;
182 
183 	return 0;
184 }
185 
186 static int qpnp_tm_get_temp(struct thermal_zone_device *tz, int *temp)
187 {
188 	struct qpnp_tm_chip *chip = thermal_zone_device_priv(tz);
189 	int ret, mili_celsius;
190 
191 	if (!temp)
192 		return -EINVAL;
193 
194 	if (!chip->initialized) {
195 		*temp = DEFAULT_TEMP;
196 		return 0;
197 	}
198 
199 	if (!chip->adc) {
200 		mutex_lock(&chip->lock);
201 		ret = qpnp_tm_update_temp_no_adc(chip);
202 		mutex_unlock(&chip->lock);
203 		if (ret < 0)
204 			return ret;
205 	} else {
206 		ret = iio_read_channel_processed(chip->adc, &mili_celsius);
207 		if (ret < 0)
208 			return ret;
209 
210 		chip->temp = mili_celsius;
211 	}
212 
213 	*temp = chip->temp;
214 
215 	return 0;
216 }
217 
218 static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
219 					     int temp)
220 {
221 	long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
222 	long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
223 	bool disable_s2_shutdown = false;
224 	u8 reg;
225 
226 	WARN_ON(!mutex_is_locked(&chip->lock));
227 
228 	/*
229 	 * Default: S2 and S3 shutdown enabled, thresholds at
230 	 * lowest threshold set, monitoring at 25Hz
231 	 */
232 	reg = SHUTDOWN_CTRL1_RATE_25HZ;
233 
234 	if (temp == THERMAL_TEMP_INVALID ||
235 	    temp < stage2_threshold_min) {
236 		chip->thresh = THRESH_MIN;
237 		goto skip;
238 	}
239 
240 	if (temp <= stage2_threshold_max) {
241 		chip->thresh = THRESH_MAX -
242 			((stage2_threshold_max - temp) /
243 			 TEMP_THRESH_STEP);
244 		disable_s2_shutdown = true;
245 	} else {
246 		chip->thresh = THRESH_MAX;
247 
248 		if (chip->adc)
249 			disable_s2_shutdown = true;
250 		else
251 			dev_warn(chip->dev,
252 				 "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
253 				 temp, stage2_threshold_max, stage2_threshold_max);
254 	}
255 
256 skip:
257 	reg |= chip->thresh;
258 	if (disable_s2_shutdown)
259 		reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
260 
261 	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
262 }
263 
264 static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz,
265 				 const struct thermal_trip *trip, int temp)
266 {
267 	struct qpnp_tm_chip *chip = thermal_zone_device_priv(tz);
268 	int ret;
269 
270 	if (trip->type != THERMAL_TRIP_CRITICAL)
271 		return 0;
272 
273 	mutex_lock(&chip->lock);
274 	ret = qpnp_tm_update_critical_trip_temp(chip, temp);
275 	mutex_unlock(&chip->lock);
276 
277 	return ret;
278 }
279 
280 static const struct thermal_zone_device_ops qpnp_tm_sensor_ops = {
281 	.get_temp = qpnp_tm_get_temp,
282 	.set_trip_temp = qpnp_tm_set_trip_temp,
283 };
284 
285 static irqreturn_t qpnp_tm_isr(int irq, void *data)
286 {
287 	struct qpnp_tm_chip *chip = data;
288 
289 	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
290 
291 	return IRQ_HANDLED;
292 }
293 
294 static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
295 {
296 	struct thermal_trip trip;
297 	int i, ret;
298 
299 	for (i = 0; i < thermal_zone_get_num_trips(chip->tz_dev); i++) {
300 
301 		ret = thermal_zone_get_trip(chip->tz_dev, i, &trip);
302 		if (ret)
303 			continue;
304 
305 		if (trip.type == THERMAL_TRIP_CRITICAL)
306 			return trip.temperature;
307 	}
308 
309 	return THERMAL_TEMP_INVALID;
310 }
311 
312 /*
313  * This function initializes the internal temp value based on only the
314  * current thermal stage and threshold. Setup threshold control and
315  * disable shutdown override.
316  */
317 static int qpnp_tm_init(struct qpnp_tm_chip *chip)
318 {
319 	unsigned int stage;
320 	int ret;
321 	u8 reg = 0;
322 	int crit_temp;
323 
324 	mutex_lock(&chip->lock);
325 
326 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
327 	if (ret < 0)
328 		goto out;
329 
330 	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
331 	chip->temp = DEFAULT_TEMP;
332 
333 	ret = qpnp_tm_get_temp_stage(chip);
334 	if (ret < 0)
335 		goto out;
336 	chip->stage = ret;
337 
338 	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
339 		? chip->stage : alarm_state_map[chip->stage];
340 
341 	if (stage)
342 		chip->temp = qpnp_tm_decode_temp(chip, stage);
343 
344 	mutex_unlock(&chip->lock);
345 
346 	crit_temp = qpnp_tm_get_critical_trip_temp(chip);
347 
348 	mutex_lock(&chip->lock);
349 
350 	ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
351 	if (ret < 0)
352 		goto out;
353 
354 	/* Enable the thermal alarm PMIC module in always-on mode. */
355 	reg = ALARM_CTRL_FORCE_ENABLE;
356 	ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
357 
358 	chip->initialized = true;
359 
360 out:
361 	mutex_unlock(&chip->lock);
362 	return ret;
363 }
364 
365 static int qpnp_tm_probe(struct platform_device *pdev)
366 {
367 	struct qpnp_tm_chip *chip;
368 	struct device_node *node;
369 	u8 type, subtype, dig_major;
370 	u32 res;
371 	int ret, irq;
372 
373 	node = pdev->dev.of_node;
374 
375 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
376 	if (!chip)
377 		return -ENOMEM;
378 
379 	dev_set_drvdata(&pdev->dev, chip);
380 	chip->dev = &pdev->dev;
381 
382 	mutex_init(&chip->lock);
383 
384 	chip->map = dev_get_regmap(pdev->dev.parent, NULL);
385 	if (!chip->map)
386 		return -ENXIO;
387 
388 	ret = of_property_read_u32(node, "reg", &res);
389 	if (ret < 0)
390 		return ret;
391 
392 	irq = platform_get_irq(pdev, 0);
393 	if (irq < 0)
394 		return irq;
395 
396 	/* ADC based measurements are optional */
397 	chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
398 	if (IS_ERR(chip->adc)) {
399 		ret = PTR_ERR(chip->adc);
400 		chip->adc = NULL;
401 		if (ret == -EPROBE_DEFER)
402 			return ret;
403 	}
404 
405 	chip->base = res;
406 
407 	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
408 	if (ret < 0)
409 		return dev_err_probe(&pdev->dev, ret,
410 				     "could not read type\n");
411 
412 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
413 	if (ret < 0)
414 		return dev_err_probe(&pdev->dev, ret,
415 				     "could not read subtype\n");
416 
417 	ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
418 	if (ret < 0)
419 		return dev_err_probe(&pdev->dev, ret,
420 				     "could not read dig_major\n");
421 
422 	if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
423 				     && subtype != QPNP_TM_SUBTYPE_GEN2)) {
424 		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
425 			type, subtype);
426 		return -ENODEV;
427 	}
428 
429 	chip->subtype = subtype;
430 	if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
431 		chip->temp_map = &temp_map_gen2_v1;
432 	else
433 		chip->temp_map = &temp_map_gen1;
434 
435 	/*
436 	 * Register the sensor before initializing the hardware to be able to
437 	 * read the trip points. get_temp() returns the default temperature
438 	 * before the hardware initialization is completed.
439 	 */
440 	chip->tz_dev = devm_thermal_of_zone_register(
441 		&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
442 	if (IS_ERR(chip->tz_dev))
443 		return dev_err_probe(&pdev->dev, PTR_ERR(chip->tz_dev),
444 				     "failed to register sensor\n");
445 
446 	ret = qpnp_tm_init(chip);
447 	if (ret < 0)
448 		return dev_err_probe(&pdev->dev, ret, "init failed\n");
449 
450 	devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev);
451 
452 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
453 					IRQF_ONESHOT, node->name, chip);
454 	if (ret < 0)
455 		return ret;
456 
457 	thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
458 
459 	return 0;
460 }
461 
462 static const struct of_device_id qpnp_tm_match_table[] = {
463 	{ .compatible = "qcom,spmi-temp-alarm" },
464 	{ }
465 };
466 MODULE_DEVICE_TABLE(of, qpnp_tm_match_table);
467 
468 static struct platform_driver qpnp_tm_driver = {
469 	.driver = {
470 		.name = "spmi-temp-alarm",
471 		.of_match_table = qpnp_tm_match_table,
472 	},
473 	.probe  = qpnp_tm_probe,
474 };
475 module_platform_driver(qpnp_tm_driver);
476 
477 MODULE_ALIAS("platform:spmi-temp-alarm");
478 MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver");
479 MODULE_LICENSE("GPL v2");
480