1 // SPDX-License-Identifier: GPL-2.0-only 2 3 /* 4 * Copyright (C) 2021, Linaro Limited. All rights reserved. 5 */ 6 #include <linux/module.h> 7 #include <linux/interrupt.h> 8 #include <linux/irqdomain.h> 9 #include <linux/err.h> 10 #include <linux/platform_device.h> 11 #include <linux/of_platform.h> 12 #include <linux/slab.h> 13 #include <linux/firmware/qcom/qcom_scm.h> 14 15 #define LMH_NODE_DCVS 0x44435653 16 #define LMH_CLUSTER0_NODE_ID 0x6370302D 17 #define LMH_CLUSTER1_NODE_ID 0x6370312D 18 19 #define LMH_SUB_FN_THERMAL 0x54484D4C 20 #define LMH_SUB_FN_CRNT 0x43524E54 21 #define LMH_SUB_FN_REL 0x52454C00 22 #define LMH_SUB_FN_BCL 0x42434C00 23 24 #define LMH_ALGO_MODE_ENABLE 0x454E424C 25 #define LMH_TH_HI_THRESHOLD 0x48494748 26 #define LMH_TH_LOW_THRESHOLD 0x4C4F5700 27 #define LMH_TH_ARM_THRESHOLD 0x41524D00 28 29 #define LMH_REG_DCVS_INTR_CLR 0x8 30 31 #define LMH_ENABLE_ALGOS 1 32 33 struct lmh_hw_data { 34 void __iomem *base; 35 struct irq_domain *domain; 36 int irq; 37 }; 38 39 static irqreturn_t lmh_handle_irq(int hw_irq, void *data) 40 { 41 struct lmh_hw_data *lmh_data = data; 42 int irq = irq_find_mapping(lmh_data->domain, 0); 43 44 /* Call the cpufreq driver to handle the interrupt */ 45 if (irq) 46 generic_handle_irq(irq); 47 48 return IRQ_HANDLED; 49 } 50 51 static void lmh_enable_interrupt(struct irq_data *d) 52 { 53 struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); 54 55 /* Clear the existing interrupt */ 56 writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR); 57 enable_irq(lmh_data->irq); 58 } 59 60 static void lmh_disable_interrupt(struct irq_data *d) 61 { 62 struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d); 63 64 disable_irq_nosync(lmh_data->irq); 65 } 66 67 static struct irq_chip lmh_irq_chip = { 68 .name = "lmh", 69 .irq_enable = lmh_enable_interrupt, 70 .irq_disable = lmh_disable_interrupt 71 }; 72 73 static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) 74 { 75 struct lmh_hw_data *lmh_data = d->host_data; 76 77 irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq); 78 irq_set_chip_data(irq, lmh_data); 79 80 return 0; 81 } 82 83 static const struct irq_domain_ops lmh_irq_ops = { 84 .map = lmh_irq_map, 85 .xlate = irq_domain_xlate_onecell, 86 }; 87 88 static int lmh_probe(struct platform_device *pdev) 89 { 90 struct device *dev = &pdev->dev; 91 struct device_node *np = dev->of_node; 92 struct device_node *cpu_node; 93 struct lmh_hw_data *lmh_data; 94 int temp_low, temp_high, temp_arm, cpu_id, ret; 95 unsigned int enable_alg; 96 u32 node_id; 97 98 lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL); 99 if (!lmh_data) 100 return -ENOMEM; 101 102 lmh_data->base = devm_platform_ioremap_resource(pdev, 0); 103 if (IS_ERR(lmh_data->base)) 104 return PTR_ERR(lmh_data->base); 105 106 cpu_node = of_parse_phandle(np, "cpus", 0); 107 if (!cpu_node) 108 return -EINVAL; 109 cpu_id = of_cpu_node_to_id(cpu_node); 110 of_node_put(cpu_node); 111 112 ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high); 113 if (ret) { 114 dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n"); 115 return ret; 116 } 117 118 ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low); 119 if (ret) { 120 dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n"); 121 return ret; 122 } 123 124 ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm); 125 if (ret) { 126 dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n"); 127 return ret; 128 } 129 130 /* 131 * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed 132 * for other platforms, revisit this to check if the <cpu-id, node-id> should be part 133 * of a dt match table. 134 */ 135 if (cpu_id == 0) { 136 node_id = LMH_CLUSTER0_NODE_ID; 137 } else if (cpu_id == 4) { 138 node_id = LMH_CLUSTER1_NODE_ID; 139 } else { 140 dev_err(dev, "Wrong CPU id associated with LMh node\n"); 141 return -EINVAL; 142 } 143 144 if (!qcom_scm_lmh_dcvsh_available()) 145 return -EINVAL; 146 147 enable_alg = (uintptr_t)of_device_get_match_data(dev); 148 149 if (enable_alg) { 150 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1, 151 LMH_NODE_DCVS, node_id, 0); 152 if (ret) 153 dev_err(dev, "Error %d enabling current subfunction\n", ret); 154 155 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1, 156 LMH_NODE_DCVS, node_id, 0); 157 if (ret) 158 dev_err(dev, "Error %d enabling reliability subfunction\n", ret); 159 160 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1, 161 LMH_NODE_DCVS, node_id, 0); 162 if (ret) 163 dev_err(dev, "Error %d enabling BCL subfunction\n", ret); 164 165 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1, 166 LMH_NODE_DCVS, node_id, 0); 167 if (ret) { 168 dev_err(dev, "Error %d enabling thermal subfunction\n", ret); 169 return ret; 170 } 171 172 ret = qcom_scm_lmh_profile_change(0x1); 173 if (ret) { 174 dev_err(dev, "Error %d changing profile\n", ret); 175 return ret; 176 } 177 } 178 179 /* Set default thermal trips */ 180 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm, 181 LMH_NODE_DCVS, node_id, 0); 182 if (ret) { 183 dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); 184 return ret; 185 } 186 187 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high, 188 LMH_NODE_DCVS, node_id, 0); 189 if (ret) { 190 dev_err(dev, "Error setting thermal HI threshold%d\n", ret); 191 return ret; 192 } 193 194 ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low, 195 LMH_NODE_DCVS, node_id, 0); 196 if (ret) { 197 dev_err(dev, "Error setting thermal ARM threshold%d\n", ret); 198 return ret; 199 } 200 201 lmh_data->irq = platform_get_irq(pdev, 0); 202 lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data); 203 if (!lmh_data->domain) { 204 dev_err(dev, "Error adding irq_domain\n"); 205 return -EINVAL; 206 } 207 208 /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */ 209 irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); 210 ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, 211 IRQF_ONESHOT | IRQF_NO_SUSPEND, 212 "lmh-irq", lmh_data); 213 if (ret) { 214 dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq); 215 irq_domain_remove(lmh_data->domain); 216 return ret; 217 } 218 219 return 0; 220 } 221 222 static const struct of_device_id lmh_table[] = { 223 { .compatible = "qcom,sc8180x-lmh", }, 224 { .compatible = "qcom,sdm845-lmh", .data = (void *)LMH_ENABLE_ALGOS}, 225 { .compatible = "qcom,sm8150-lmh", }, 226 {} 227 }; 228 MODULE_DEVICE_TABLE(of, lmh_table); 229 230 static struct platform_driver lmh_driver = { 231 .probe = lmh_probe, 232 .driver = { 233 .name = "qcom-lmh", 234 .of_match_table = lmh_table, 235 .suppress_bind_attrs = true, 236 }, 237 }; 238 module_platform_driver(lmh_driver); 239 240 MODULE_LICENSE("GPL v2"); 241 MODULE_DESCRIPTION("QCOM LMh driver"); 242