xref: /linux/drivers/thermal/imx8mm_thermal.c (revision 59fff63cc2b75dcfe08f9eeb4b2187d73e53843d)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright 2020 NXP.
4  *
5  * Author: Anson Huang <Anson.Huang@nxp.com>
6  */
7 
8 #include <linux/bitfield.h>
9 #include <linux/clk.h>
10 #include <linux/err.h>
11 #include <linux/io.h>
12 #include <linux/module.h>
13 #include <linux/nvmem-consumer.h>
14 #include <linux/of.h>
15 #include <linux/platform_device.h>
16 #include <linux/slab.h>
17 #include <linux/thermal.h>
18 
19 #include "thermal_hwmon.h"
20 
21 #define TER			0x0	/* TMU enable */
22 #define TPS			0x4
23 #define TRITSR			0x20	/* TMU immediate temp */
24 /* TMU calibration data registers */
25 #define TASR			0x28
26 #define TASR_BUF_SLOPE_MASK	GENMASK(19, 16)
27 #define TASR_BUF_VREF_MASK	GENMASK(4, 0)	/* TMU_V1 */
28 #define TASR_BUF_VERF_SEL_MASK	GENMASK(1, 0)	/* TMU_V2 */
29 #define TCALIV(n)		(0x30 + ((n) * 4))
30 #define TCALIV_EN		BIT(31)
31 #define TCALIV_HR_MASK		GENMASK(23, 16)	/* TMU_V1 */
32 #define TCALIV_RT_MASK		GENMASK(7, 0)	/* TMU_V1 */
33 #define TCALIV_SNSR105C_MASK	GENMASK(27, 16)	/* TMU_V2 */
34 #define TCALIV_SNSR25C_MASK	GENMASK(11, 0)	/* TMU_V2 */
35 #define TRIM			0x3c
36 #define TRIM_BJT_CUR_MASK	GENMASK(23, 20)
37 #define TRIM_BGR_MASK		GENMASK(31, 28)
38 #define TRIM_VLSB_MASK		GENMASK(15, 12)
39 #define TRIM_EN_CH		BIT(7)
40 
41 #define TER_ADC_PD		BIT(30)
42 #define TER_EN			BIT(31)
43 #define TRITSR_TEMP0_VAL_MASK	GENMASK(7, 0)
44 #define TRITSR_TEMP1_VAL_MASK	GENMASK(23, 16)
45 
46 #define PROBE_SEL_ALL		GENMASK(31, 30)
47 
48 #define probe_status_offset(x)	(30 + x)
49 #define SIGN_BIT		BIT(7)
50 #define TEMP_VAL_MASK		GENMASK(6, 0)
51 
52 /* TMU OCOTP calibration data bitfields */
53 #define ANA0_EN			BIT(25)
54 #define ANA0_BUF_VREF_MASK	GENMASK(24, 20)
55 #define ANA0_BUF_SLOPE_MASK	GENMASK(19, 16)
56 #define ANA0_HR_MASK		GENMASK(15, 8)
57 #define ANA0_RT_MASK		GENMASK(7, 0)
58 #define TRIM2_VLSB_MASK		GENMASK(23, 20)
59 #define TRIM2_BGR_MASK		GENMASK(19, 16)
60 #define TRIM2_BJT_CUR_MASK	GENMASK(15, 12)
61 #define TRIM2_BUF_SLOP_SEL_MASK	GENMASK(11, 8)
62 #define TRIM2_BUF_VERF_SEL_MASK	GENMASK(7, 6)
63 #define TRIM3_TCA25_0_LSB_MASK	GENMASK(31, 28)
64 #define TRIM3_TCA40_0_MASK	GENMASK(27, 16)
65 #define TRIM4_TCA40_1_MASK	GENMASK(31, 20)
66 #define TRIM4_TCA105_0_MASK	GENMASK(19, 8)
67 #define TRIM4_TCA25_0_MSB_MASK	GENMASK(7, 0)
68 #define TRIM5_TCA105_1_MASK	GENMASK(23, 12)
69 #define TRIM5_TCA25_1_MASK	GENMASK(11, 0)
70 
71 #define VER1_TEMP_LOW_LIMIT	10000
72 #define VER2_TEMP_LOW_LIMIT	-40000
73 #define VER2_TEMP_HIGH_LIMIT	125000
74 
75 #define TMU_VER1		0x1
76 #define TMU_VER2		0x2
77 
78 struct thermal_soc_data {
79 	u32 num_sensors;
80 	u32 version;
81 	int (*get_temp)(void *data, int *temp);
82 };
83 
84 struct tmu_sensor {
85 	struct imx8mm_tmu *priv;
86 	u32 hw_id;
87 	struct thermal_zone_device *tzd;
88 };
89 
90 struct imx8mm_tmu {
91 	void __iomem *base;
92 	struct clk *clk;
93 	const struct thermal_soc_data *socdata;
94 	struct tmu_sensor sensors[];
95 };
96 
97 static int imx8mm_tmu_get_temp(void *data, int *temp)
98 {
99 	struct tmu_sensor *sensor = data;
100 	struct imx8mm_tmu *tmu = sensor->priv;
101 	u32 val;
102 
103 	val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
104 
105 	/*
106 	 * Do not validate against the V bit (bit 31) due to errata
107 	 * ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid
108 	 */
109 
110 	*temp = val * 1000;
111 	if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
112 		return -EAGAIN;
113 
114 	return 0;
115 }
116 
117 static int imx8mp_tmu_get_temp(void *data, int *temp)
118 {
119 	struct tmu_sensor *sensor = data;
120 	struct imx8mm_tmu *tmu = sensor->priv;
121 	unsigned long val;
122 	bool ready;
123 
124 	val = readl_relaxed(tmu->base + TRITSR);
125 	ready = test_bit(probe_status_offset(sensor->hw_id), &val);
126 	if (!ready)
127 		return -EAGAIN;
128 
129 	val = sensor->hw_id ? FIELD_GET(TRITSR_TEMP1_VAL_MASK, val) :
130 	      FIELD_GET(TRITSR_TEMP0_VAL_MASK, val);
131 	if (val & SIGN_BIT) /* negative */
132 		val = (~(val & TEMP_VAL_MASK) + 1);
133 
134 	*temp = val * 1000;
135 	if (*temp < VER2_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
136 		return -EAGAIN;
137 
138 	return 0;
139 }
140 
141 static int tmu_get_temp(struct thermal_zone_device *tz, int *temp)
142 {
143 	struct tmu_sensor *sensor = thermal_zone_device_priv(tz);
144 	struct imx8mm_tmu *tmu = sensor->priv;
145 
146 	return tmu->socdata->get_temp(sensor, temp);
147 }
148 
149 static const struct thermal_zone_device_ops tmu_tz_ops = {
150 	.get_temp = tmu_get_temp,
151 };
152 
153 static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
154 {
155 	u32 val;
156 
157 	val = readl_relaxed(tmu->base + TER);
158 	val = enable ? (val | TER_EN) : (val & ~TER_EN);
159 	if (tmu->socdata->version == TMU_VER2)
160 		val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD);
161 	writel_relaxed(val, tmu->base + TER);
162 }
163 
164 static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
165 {
166 	u32 val;
167 
168 	val = readl_relaxed(tmu->base + TPS);
169 	val |= PROBE_SEL_ALL;
170 	writel_relaxed(val, tmu->base + TPS);
171 }
172 
173 static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev,
174 					 struct imx8mm_tmu *tmu)
175 {
176 	struct device *dev = &pdev->dev;
177 	u32 ana0;
178 	int ret;
179 
180 	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0);
181 	if (ret)
182 		return dev_err_probe(dev, ret, "Failed to read OCOTP nvmem cell\n");
183 
184 	writel(FIELD_PREP(TASR_BUF_VREF_MASK,
185 			  FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) |
186 	       FIELD_PREP(TASR_BUF_SLOPE_MASK,
187 			  FIELD_GET(ANA0_BUF_SLOPE_MASK, ana0)),
188 	       tmu->base + TASR);
189 
190 	writel(FIELD_PREP(TCALIV_RT_MASK, FIELD_GET(ANA0_RT_MASK, ana0)) |
191 	       FIELD_PREP(TCALIV_HR_MASK, FIELD_GET(ANA0_HR_MASK, ana0)) |
192 	       ((ana0 & ANA0_EN) ? TCALIV_EN : 0),
193 	       tmu->base + TCALIV(0));
194 
195 	return 0;
196 }
197 
198 static int imx8mm_tmu_probe_set_calib_v2(struct platform_device *pdev,
199 					 struct imx8mm_tmu *tmu)
200 {
201 	struct device *dev = &pdev->dev;
202 	struct nvmem_cell *cell;
203 	u32 trim[4] = { 0 };
204 	size_t len;
205 	void *buf;
206 
207 	cell = nvmem_cell_get(dev, "calib");
208 	if (IS_ERR(cell))
209 		return PTR_ERR(cell);
210 
211 	buf = nvmem_cell_read(cell, &len);
212 	nvmem_cell_put(cell);
213 
214 	if (IS_ERR(buf))
215 		return PTR_ERR(buf);
216 
217 	memcpy(trim, buf, min(len, sizeof(trim)));
218 	kfree(buf);
219 
220 	if (len != 16) {
221 		dev_err(dev,
222 			"OCOTP nvmem cell length is %zu, must be 16.\n", len);
223 		return -EINVAL;
224 	}
225 
226 	/* Blank sample hardware */
227 	if (!trim[0] && !trim[1] && !trim[2] && !trim[3]) {
228 		/* Use a default 25C binary codes */
229 		writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
230 		       tmu->base + TCALIV(0));
231 		writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
232 		       tmu->base + TCALIV(1));
233 		return 0;
234 	}
235 
236 	writel(FIELD_PREP(TASR_BUF_VERF_SEL_MASK,
237 			  FIELD_GET(TRIM2_BUF_VERF_SEL_MASK, trim[0])) |
238 	       FIELD_PREP(TASR_BUF_SLOPE_MASK,
239 			  FIELD_GET(TRIM2_BUF_SLOP_SEL_MASK, trim[0])),
240 	       tmu->base + TASR);
241 
242 	writel(FIELD_PREP(TRIM_BJT_CUR_MASK,
243 			  FIELD_GET(TRIM2_BJT_CUR_MASK, trim[0])) |
244 	       FIELD_PREP(TRIM_BGR_MASK, FIELD_GET(TRIM2_BGR_MASK, trim[0])) |
245 	       FIELD_PREP(TRIM_VLSB_MASK, FIELD_GET(TRIM2_VLSB_MASK, trim[0])) |
246 	       TRIM_EN_CH,
247 	       tmu->base + TRIM);
248 
249 	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
250 			  FIELD_GET(TRIM3_TCA25_0_LSB_MASK, trim[1]) |
251 			  (FIELD_GET(TRIM4_TCA25_0_MSB_MASK, trim[2]) << 4)) |
252 	       FIELD_PREP(TCALIV_SNSR105C_MASK,
253 			  FIELD_GET(TRIM4_TCA105_0_MASK, trim[2])),
254 	       tmu->base + TCALIV(0));
255 
256 	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
257 			  FIELD_GET(TRIM5_TCA25_1_MASK, trim[3])) |
258 	       FIELD_PREP(TCALIV_SNSR105C_MASK,
259 			  FIELD_GET(TRIM5_TCA105_1_MASK, trim[3])),
260 	       tmu->base + TCALIV(1));
261 
262 	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
263 			  FIELD_GET(TRIM3_TCA40_0_MASK, trim[1])) |
264 	       FIELD_PREP(TCALIV_SNSR105C_MASK,
265 			  FIELD_GET(TRIM4_TCA40_1_MASK, trim[2])),
266 	       tmu->base + TCALIV(2));
267 
268 	return 0;
269 }
270 
271 static int imx8mm_tmu_probe_set_calib(struct platform_device *pdev,
272 				      struct imx8mm_tmu *tmu)
273 {
274 	struct device *dev = &pdev->dev;
275 
276 	/*
277 	 * Lack of calibration data OCOTP reference is not considered
278 	 * fatal to retain compatibility with old DTs. It is however
279 	 * strongly recommended to update such old DTs to get correct
280 	 * temperature compensation values for each SoC.
281 	 */
282 	if (!of_property_present(pdev->dev.of_node, "nvmem-cells")) {
283 		dev_warn(dev,
284 			 "No OCOTP nvmem reference found, SoC-specific calibration not loaded. Please update your DT.\n");
285 		return 0;
286 	}
287 
288 	if (tmu->socdata->version == TMU_VER1)
289 		return imx8mm_tmu_probe_set_calib_v1(pdev, tmu);
290 
291 	return imx8mm_tmu_probe_set_calib_v2(pdev, tmu);
292 }
293 
294 static int imx8mm_tmu_probe(struct platform_device *pdev)
295 {
296 	const struct thermal_soc_data *data;
297 	struct imx8mm_tmu *tmu;
298 	int ret;
299 	int i;
300 
301 	data = of_device_get_match_data(&pdev->dev);
302 
303 	tmu = devm_kzalloc(&pdev->dev, struct_size(tmu, sensors,
304 			   data->num_sensors), GFP_KERNEL);
305 	if (!tmu)
306 		return -ENOMEM;
307 
308 	tmu->socdata = data;
309 
310 	tmu->base = devm_platform_ioremap_resource(pdev, 0);
311 	if (IS_ERR(tmu->base))
312 		return PTR_ERR(tmu->base);
313 
314 	tmu->clk = devm_clk_get(&pdev->dev, NULL);
315 	if (IS_ERR(tmu->clk))
316 		return dev_err_probe(&pdev->dev, PTR_ERR(tmu->clk),
317 				     "failed to get tmu clock\n");
318 
319 	ret = clk_prepare_enable(tmu->clk);
320 	if (ret) {
321 		dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret);
322 		return ret;
323 	}
324 
325 	/* disable the monitor during initialization */
326 	imx8mm_tmu_enable(tmu, false);
327 
328 	for (i = 0; i < data->num_sensors; i++) {
329 		tmu->sensors[i].priv = tmu;
330 		tmu->sensors[i].tzd =
331 			devm_thermal_of_zone_register(&pdev->dev, i,
332 						      &tmu->sensors[i],
333 						      &tmu_tz_ops);
334 		if (IS_ERR(tmu->sensors[i].tzd)) {
335 			ret = PTR_ERR(tmu->sensors[i].tzd);
336 			dev_err(&pdev->dev,
337 				"failed to register thermal zone sensor[%d]: %d\n",
338 				i, ret);
339 			goto disable_clk;
340 		}
341 		tmu->sensors[i].hw_id = i;
342 
343 		devm_thermal_add_hwmon_sysfs(&pdev->dev, tmu->sensors[i].tzd);
344 	}
345 
346 	platform_set_drvdata(pdev, tmu);
347 
348 	ret = imx8mm_tmu_probe_set_calib(pdev, tmu);
349 	if (ret)
350 		goto disable_clk;
351 
352 	/* enable all the probes for V2 TMU */
353 	if (tmu->socdata->version == TMU_VER2)
354 		imx8mm_tmu_probe_sel_all(tmu);
355 
356 	/* enable the monitor */
357 	imx8mm_tmu_enable(tmu, true);
358 
359 	return 0;
360 
361 disable_clk:
362 	clk_disable_unprepare(tmu->clk);
363 	return ret;
364 }
365 
366 static void imx8mm_tmu_remove(struct platform_device *pdev)
367 {
368 	struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
369 
370 	/* disable TMU */
371 	imx8mm_tmu_enable(tmu, false);
372 
373 	clk_disable_unprepare(tmu->clk);
374 	platform_set_drvdata(pdev, NULL);
375 }
376 
377 static struct thermal_soc_data imx8mm_tmu_data = {
378 	.num_sensors = 1,
379 	.version = TMU_VER1,
380 	.get_temp = imx8mm_tmu_get_temp,
381 };
382 
383 static struct thermal_soc_data imx8mp_tmu_data = {
384 	.num_sensors = 2,
385 	.version = TMU_VER2,
386 	.get_temp = imx8mp_tmu_get_temp,
387 };
388 
389 static const struct of_device_id imx8mm_tmu_table[] = {
390 	{ .compatible = "fsl,imx8mm-tmu", .data = &imx8mm_tmu_data, },
391 	{ .compatible = "fsl,imx8mp-tmu", .data = &imx8mp_tmu_data, },
392 	{ },
393 };
394 MODULE_DEVICE_TABLE(of, imx8mm_tmu_table);
395 
396 static struct platform_driver imx8mm_tmu = {
397 	.driver = {
398 		.name	= "i.mx8mm_thermal",
399 		.of_match_table = imx8mm_tmu_table,
400 	},
401 	.probe = imx8mm_tmu_probe,
402 	.remove_new = imx8mm_tmu_remove,
403 };
404 module_platform_driver(imx8mm_tmu);
405 
406 MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
407 MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver");
408 MODULE_LICENSE("GPL v2");
409