1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /******************************************************************************* 3 * Filename: target_core_xcopy.c 4 * 5 * This file contains support for SPC-4 Extended-Copy offload with generic 6 * TCM backends. 7 * 8 * Copyright (c) 2011-2013 Datera, Inc. All rights reserved. 9 * 10 * Author: 11 * Nicholas A. Bellinger <nab@daterainc.com> 12 * 13 ******************************************************************************/ 14 15 #include <linux/slab.h> 16 #include <linux/spinlock.h> 17 #include <linux/list.h> 18 #include <linux/rculist.h> 19 #include <linux/configfs.h> 20 #include <linux/ratelimit.h> 21 #include <scsi/scsi_proto.h> 22 #include <asm/unaligned.h> 23 24 #include <target/target_core_base.h> 25 #include <target/target_core_backend.h> 26 #include <target/target_core_fabric.h> 27 28 #include "target_core_internal.h" 29 #include "target_core_pr.h" 30 #include "target_core_ua.h" 31 #include "target_core_xcopy.h" 32 33 static struct workqueue_struct *xcopy_wq = NULL; 34 35 static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop); 36 37 /** 38 * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers 39 * 40 * @se_dev: device being considered for match 41 * @dev_wwn: XCOPY requested NAA dev_wwn 42 * @return: 1 on match, 0 on no-match 43 */ 44 static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev, 45 const unsigned char *dev_wwn) 46 { 47 unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; 48 int rc; 49 50 if (!se_dev->dev_attrib.emulate_3pc) { 51 pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev); 52 return 0; 53 } 54 55 memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); 56 spc_gen_naa_6h_vendor_specific(se_dev, &tmp_dev_wwn[0]); 57 58 rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN); 59 if (rc != 0) { 60 pr_debug("XCOPY: skip non-matching: %*ph\n", 61 XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn); 62 return 0; 63 } 64 pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); 65 66 return 1; 67 } 68 69 static int target_xcopy_locate_se_dev_e4(struct se_session *sess, 70 const unsigned char *dev_wwn, 71 struct se_device **_found_dev, 72 struct percpu_ref **_found_lun_ref) 73 { 74 struct se_dev_entry *deve; 75 struct se_node_acl *nacl; 76 struct se_lun *this_lun = NULL; 77 struct se_device *found_dev = NULL; 78 79 /* cmd with NULL sess indicates no associated $FABRIC_MOD */ 80 if (!sess) 81 goto err_out; 82 83 pr_debug("XCOPY 0xe4: searching for: %*ph\n", 84 XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn); 85 86 nacl = sess->se_node_acl; 87 rcu_read_lock(); 88 hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { 89 struct se_device *this_dev; 90 int rc; 91 92 this_lun = deve->se_lun; 93 this_dev = rcu_dereference_raw(this_lun->lun_se_dev); 94 95 rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn); 96 if (rc) { 97 if (percpu_ref_tryget_live(&this_lun->lun_ref)) 98 found_dev = this_dev; 99 break; 100 } 101 } 102 rcu_read_unlock(); 103 if (found_dev == NULL) 104 goto err_out; 105 106 pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n", 107 found_dev, &found_dev->dev_group); 108 *_found_dev = found_dev; 109 *_found_lun_ref = &this_lun->lun_ref; 110 return 0; 111 err_out: 112 pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n"); 113 return -EINVAL; 114 } 115 116 static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, 117 unsigned char *p, unsigned short cscd_index) 118 { 119 unsigned char *desc = p; 120 unsigned short ript; 121 u8 desig_len; 122 /* 123 * Extract RELATIVE INITIATOR PORT IDENTIFIER 124 */ 125 ript = get_unaligned_be16(&desc[2]); 126 pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript); 127 /* 128 * Check for supported code set, association, and designator type 129 */ 130 if ((desc[4] & 0x0f) != 0x1) { 131 pr_err("XCOPY 0xe4: code set of non binary type not supported\n"); 132 return -EINVAL; 133 } 134 if ((desc[5] & 0x30) != 0x00) { 135 pr_err("XCOPY 0xe4: association other than LUN not supported\n"); 136 return -EINVAL; 137 } 138 if ((desc[5] & 0x0f) != 0x3) { 139 pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n", 140 (desc[5] & 0x0f)); 141 return -EINVAL; 142 } 143 /* 144 * Check for matching 16 byte length for NAA IEEE Registered Extended 145 * Assigned designator 146 */ 147 desig_len = desc[7]; 148 if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) { 149 pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len); 150 return -EINVAL; 151 } 152 pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len); 153 /* 154 * Check for NAA IEEE Registered Extended Assigned header.. 155 */ 156 if ((desc[8] & 0xf0) != 0x60) { 157 pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n", 158 (desc[8] & 0xf0)); 159 return -EINVAL; 160 } 161 162 if (cscd_index != xop->stdi && cscd_index != xop->dtdi) { 163 pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor " 164 "dest\n", cscd_index); 165 return 0; 166 } 167 168 if (cscd_index == xop->stdi) { 169 memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); 170 /* 171 * Determine if the source designator matches the local device 172 */ 173 if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0], 174 XCOPY_NAA_IEEE_REGEX_LEN)) { 175 xop->op_origin = XCOL_SOURCE_RECV_OP; 176 xop->src_dev = se_cmd->se_dev; 177 pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source" 178 " received xop\n", xop->src_dev); 179 } 180 } 181 182 if (cscd_index == xop->dtdi) { 183 memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); 184 /* 185 * Determine if the destination designator matches the local 186 * device. If @cscd_index corresponds to both source (stdi) and 187 * destination (dtdi), or dtdi comes after stdi, then 188 * XCOL_DEST_RECV_OP wins. 189 */ 190 if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0], 191 XCOPY_NAA_IEEE_REGEX_LEN)) { 192 xop->op_origin = XCOL_DEST_RECV_OP; 193 xop->dst_dev = se_cmd->se_dev; 194 pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination" 195 " received xop\n", xop->dst_dev); 196 } 197 } 198 199 return 0; 200 } 201 202 static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, 203 struct xcopy_op *xop, unsigned char *p, 204 unsigned short tdll, sense_reason_t *sense_ret) 205 { 206 struct se_device *local_dev = se_cmd->se_dev; 207 unsigned char *desc = p; 208 int offset = tdll % XCOPY_TARGET_DESC_LEN, rc; 209 unsigned short cscd_index = 0; 210 unsigned short start = 0; 211 212 *sense_ret = TCM_INVALID_PARAMETER_LIST; 213 214 if (offset != 0) { 215 pr_err("XCOPY target descriptor list length is not" 216 " multiple of %d\n", XCOPY_TARGET_DESC_LEN); 217 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; 218 return -EINVAL; 219 } 220 if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { 221 pr_err("XCOPY target descriptor supports a maximum" 222 " two src/dest descriptors, tdll: %hu too large..\n", tdll); 223 /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */ 224 *sense_ret = TCM_TOO_MANY_TARGET_DESCS; 225 return -EINVAL; 226 } 227 /* 228 * Generate an IEEE Registered Extended designator based upon the 229 * se_device the XCOPY was received upon.. 230 */ 231 memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); 232 spc_gen_naa_6h_vendor_specific(local_dev, &xop->local_dev_wwn[0]); 233 234 while (start < tdll) { 235 /* 236 * Check target descriptor identification with 0xE4 type, and 237 * compare the current index with the CSCD descriptor IDs in 238 * the segment descriptor. Use VPD 0x83 WWPN matching .. 239 */ 240 switch (desc[0]) { 241 case 0xe4: 242 rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop, 243 &desc[0], cscd_index); 244 if (rc != 0) 245 goto out; 246 start += XCOPY_TARGET_DESC_LEN; 247 desc += XCOPY_TARGET_DESC_LEN; 248 cscd_index++; 249 break; 250 default: 251 pr_err("XCOPY unsupported descriptor type code:" 252 " 0x%02x\n", desc[0]); 253 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; 254 goto out; 255 } 256 } 257 258 switch (xop->op_origin) { 259 case XCOL_SOURCE_RECV_OP: 260 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, 261 xop->dst_tid_wwn, 262 &xop->dst_dev, 263 &xop->remote_lun_ref); 264 break; 265 case XCOL_DEST_RECV_OP: 266 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, 267 xop->src_tid_wwn, 268 &xop->src_dev, 269 &xop->remote_lun_ref); 270 break; 271 default: 272 pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " 273 "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi); 274 rc = -EINVAL; 275 break; 276 } 277 /* 278 * If a matching IEEE NAA 0x83 descriptor for the requested device 279 * is not located on this node, return COPY_ABORTED with ASQ/ASQC 280 * 0x0d/0x02 - COPY_TARGET_DEVICE_NOT_REACHABLE to request the 281 * initiator to fall back to normal copy method. 282 */ 283 if (rc < 0) { 284 *sense_ret = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; 285 goto out; 286 } 287 288 pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n", 289 xop->src_dev, &xop->src_tid_wwn[0]); 290 pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n", 291 xop->dst_dev, &xop->dst_tid_wwn[0]); 292 293 return cscd_index; 294 295 out: 296 return -EINVAL; 297 } 298 299 static int target_xcopy_parse_segdesc_02(struct xcopy_op *xop, unsigned char *p) 300 { 301 unsigned char *desc = p; 302 int dc = (desc[1] & 0x02); 303 unsigned short desc_len; 304 305 desc_len = get_unaligned_be16(&desc[2]); 306 if (desc_len != 0x18) { 307 pr_err("XCOPY segment desc 0x02: Illegal desc_len:" 308 " %hu\n", desc_len); 309 return -EINVAL; 310 } 311 312 xop->stdi = get_unaligned_be16(&desc[4]); 313 xop->dtdi = get_unaligned_be16(&desc[6]); 314 315 if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX || 316 xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) { 317 pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", 318 XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi); 319 return -EINVAL; 320 } 321 322 pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n", 323 desc_len, xop->stdi, xop->dtdi, dc); 324 325 xop->nolb = get_unaligned_be16(&desc[10]); 326 xop->src_lba = get_unaligned_be64(&desc[12]); 327 xop->dst_lba = get_unaligned_be64(&desc[20]); 328 pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n", 329 xop->nolb, (unsigned long long)xop->src_lba, 330 (unsigned long long)xop->dst_lba); 331 332 return 0; 333 } 334 335 static int target_xcopy_parse_segment_descriptors(struct xcopy_op *xop, 336 unsigned char *p, unsigned int sdll, 337 sense_reason_t *sense_ret) 338 { 339 unsigned char *desc = p; 340 unsigned int start = 0; 341 int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0; 342 343 *sense_ret = TCM_INVALID_PARAMETER_LIST; 344 345 if (offset != 0) { 346 pr_err("XCOPY segment descriptor list length is not" 347 " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); 348 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; 349 return -EINVAL; 350 } 351 if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { 352 pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" 353 " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll); 354 /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */ 355 *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS; 356 return -EINVAL; 357 } 358 359 while (start < sdll) { 360 /* 361 * Check segment descriptor type code for block -> block 362 */ 363 switch (desc[0]) { 364 case 0x02: 365 rc = target_xcopy_parse_segdesc_02(xop, desc); 366 if (rc < 0) 367 goto out; 368 369 ret++; 370 start += XCOPY_SEGMENT_DESC_LEN; 371 desc += XCOPY_SEGMENT_DESC_LEN; 372 break; 373 default: 374 pr_err("XCOPY unsupported segment descriptor" 375 "type: 0x%02x\n", desc[0]); 376 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; 377 goto out; 378 } 379 } 380 381 return ret; 382 383 out: 384 return -EINVAL; 385 } 386 387 /* 388 * Start xcopy_pt ops 389 */ 390 391 struct xcopy_pt_cmd { 392 struct se_cmd se_cmd; 393 struct completion xpt_passthrough_sem; 394 unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER]; 395 }; 396 397 struct se_portal_group xcopy_pt_tpg; 398 static struct se_session xcopy_pt_sess; 399 static struct se_node_acl xcopy_pt_nacl; 400 401 static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd) 402 { 403 return 0; 404 } 405 406 static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) 407 { 408 if (xop->op_origin == XCOL_SOURCE_RECV_OP) 409 pr_debug("putting dst lun_ref for %p\n", xop->dst_dev); 410 else 411 pr_debug("putting src lun_ref for %p\n", xop->src_dev); 412 413 percpu_ref_put(xop->remote_lun_ref); 414 } 415 416 static void xcopy_pt_release_cmd(struct se_cmd *se_cmd) 417 { 418 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, 419 struct xcopy_pt_cmd, se_cmd); 420 421 /* xpt_cmd is on the stack, nothing to free here */ 422 pr_debug("xpt_cmd done: %p\n", xpt_cmd); 423 } 424 425 static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd) 426 { 427 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd, 428 struct xcopy_pt_cmd, se_cmd); 429 430 complete(&xpt_cmd->xpt_passthrough_sem); 431 return 0; 432 } 433 434 static int xcopy_pt_write_pending(struct se_cmd *se_cmd) 435 { 436 return 0; 437 } 438 439 static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd) 440 { 441 return 0; 442 } 443 444 static int xcopy_pt_queue_status(struct se_cmd *se_cmd) 445 { 446 return 0; 447 } 448 449 static const struct target_core_fabric_ops xcopy_pt_tfo = { 450 .fabric_name = "xcopy-pt", 451 .get_cmd_state = xcopy_pt_get_cmd_state, 452 .release_cmd = xcopy_pt_release_cmd, 453 .check_stop_free = xcopy_pt_check_stop_free, 454 .write_pending = xcopy_pt_write_pending, 455 .queue_data_in = xcopy_pt_queue_data_in, 456 .queue_status = xcopy_pt_queue_status, 457 }; 458 459 /* 460 * End xcopy_pt_ops 461 */ 462 463 int target_xcopy_setup_pt(void) 464 { 465 xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0); 466 if (!xcopy_wq) { 467 pr_err("Unable to allocate xcopy_wq\n"); 468 return -ENOMEM; 469 } 470 471 memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group)); 472 INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list); 473 INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list); 474 475 xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo; 476 477 memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl)); 478 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list); 479 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list); 480 memset(&xcopy_pt_sess, 0, sizeof(struct se_session)); 481 transport_init_session(&xcopy_pt_sess); 482 483 xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg; 484 xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess; 485 486 xcopy_pt_sess.se_tpg = &xcopy_pt_tpg; 487 xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl; 488 489 return 0; 490 } 491 492 void target_xcopy_release_pt(void) 493 { 494 if (xcopy_wq) 495 destroy_workqueue(xcopy_wq); 496 } 497 498 /* 499 * target_xcopy_setup_pt_cmd - set up a pass-through command 500 * @xpt_cmd: Data structure to initialize. 501 * @xop: Describes the XCOPY operation received from an initiator. 502 * @se_dev: Backend device to associate with @xpt_cmd if 503 * @remote_port == true. 504 * @cdb: SCSI CDB to be copied into @xpt_cmd. 505 * @remote_port: If false, use the LUN through which the XCOPY command has 506 * been received. If true, use @se_dev->xcopy_lun. 507 * 508 * Set up a SCSI command (READ or WRITE) that will be used to execute an 509 * XCOPY command. 510 */ 511 static int target_xcopy_setup_pt_cmd( 512 struct xcopy_pt_cmd *xpt_cmd, 513 struct xcopy_op *xop, 514 struct se_device *se_dev, 515 unsigned char *cdb, 516 bool remote_port) 517 { 518 struct se_cmd *cmd = &xpt_cmd->se_cmd; 519 520 /* 521 * Setup LUN+port to honor reservations based upon xop->op_origin for 522 * X-COPY PUSH or X-COPY PULL based upon where the CDB was received. 523 */ 524 if (remote_port) { 525 cmd->se_lun = &se_dev->xcopy_lun; 526 cmd->se_dev = se_dev; 527 } else { 528 cmd->se_lun = xop->xop_se_cmd->se_lun; 529 cmd->se_dev = xop->xop_se_cmd->se_dev; 530 } 531 cmd->se_cmd_flags |= SCF_SE_LUN_CMD; 532 533 if (target_cmd_init_cdb(cmd, cdb, GFP_KERNEL)) 534 return -EINVAL; 535 536 cmd->tag = 0; 537 if (target_cmd_parse_cdb(cmd)) 538 return -EINVAL; 539 540 if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg, 541 xop->xop_data_nents, NULL, 0)) 542 return -EINVAL; 543 544 pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:" 545 " %u\n", cmd->t_data_sg, cmd->t_data_nents); 546 547 return 0; 548 } 549 550 static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd) 551 { 552 struct se_cmd *se_cmd = &xpt_cmd->se_cmd; 553 sense_reason_t sense_rc; 554 555 sense_rc = transport_generic_new_cmd(se_cmd); 556 if (sense_rc) 557 return -EINVAL; 558 559 if (se_cmd->data_direction == DMA_TO_DEVICE) 560 target_execute_cmd(se_cmd); 561 562 wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem); 563 564 pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n", 565 se_cmd->scsi_status); 566 567 return (se_cmd->scsi_status) ? -EINVAL : 0; 568 } 569 570 static int target_xcopy_read_source( 571 struct se_cmd *ec_cmd, 572 struct xcopy_op *xop, 573 struct se_device *src_dev, 574 sector_t src_lba, 575 u32 src_bytes) 576 { 577 struct xcopy_pt_cmd xpt_cmd; 578 struct se_cmd *se_cmd = &xpt_cmd.se_cmd; 579 u32 transfer_length_block = src_bytes / src_dev->dev_attrib.block_size; 580 int rc; 581 unsigned char cdb[16]; 582 bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP); 583 584 memset(&xpt_cmd, 0, sizeof(xpt_cmd)); 585 init_completion(&xpt_cmd.xpt_passthrough_sem); 586 587 memset(&cdb[0], 0, 16); 588 cdb[0] = READ_16; 589 put_unaligned_be64(src_lba, &cdb[2]); 590 put_unaligned_be32(transfer_length_block, &cdb[10]); 591 pr_debug("XCOPY: Built READ_16: LBA: %llu Blocks: %u Length: %u\n", 592 (unsigned long long)src_lba, transfer_length_block, src_bytes); 593 594 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, src_bytes, 595 DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0, 596 NULL); 597 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0], 598 remote_port); 599 if (rc < 0) { 600 ec_cmd->scsi_status = se_cmd->scsi_status; 601 goto out; 602 } 603 604 pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ" 605 " memory\n", xop->xop_data_sg, xop->xop_data_nents); 606 607 rc = target_xcopy_issue_pt_cmd(&xpt_cmd); 608 if (rc < 0) 609 ec_cmd->scsi_status = se_cmd->scsi_status; 610 out: 611 transport_generic_free_cmd(se_cmd, 0); 612 return rc; 613 } 614 615 static int target_xcopy_write_destination( 616 struct se_cmd *ec_cmd, 617 struct xcopy_op *xop, 618 struct se_device *dst_dev, 619 sector_t dst_lba, 620 u32 dst_bytes) 621 { 622 struct xcopy_pt_cmd xpt_cmd; 623 struct se_cmd *se_cmd = &xpt_cmd.se_cmd; 624 u32 transfer_length_block = dst_bytes / dst_dev->dev_attrib.block_size; 625 int rc; 626 unsigned char cdb[16]; 627 bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP); 628 629 memset(&xpt_cmd, 0, sizeof(xpt_cmd)); 630 init_completion(&xpt_cmd.xpt_passthrough_sem); 631 632 memset(&cdb[0], 0, 16); 633 cdb[0] = WRITE_16; 634 put_unaligned_be64(dst_lba, &cdb[2]); 635 put_unaligned_be32(transfer_length_block, &cdb[10]); 636 pr_debug("XCOPY: Built WRITE_16: LBA: %llu Blocks: %u Length: %u\n", 637 (unsigned long long)dst_lba, transfer_length_block, dst_bytes); 638 639 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, dst_bytes, 640 DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0, 641 NULL); 642 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0], 643 remote_port); 644 if (rc < 0) { 645 ec_cmd->scsi_status = se_cmd->scsi_status; 646 goto out; 647 } 648 649 rc = target_xcopy_issue_pt_cmd(&xpt_cmd); 650 if (rc < 0) 651 ec_cmd->scsi_status = se_cmd->scsi_status; 652 out: 653 transport_generic_free_cmd(se_cmd, 0); 654 return rc; 655 } 656 657 static void target_xcopy_do_work(struct work_struct *work) 658 { 659 struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work); 660 struct se_cmd *ec_cmd = xop->xop_se_cmd; 661 struct se_device *src_dev, *dst_dev; 662 sector_t src_lba, dst_lba, end_lba; 663 unsigned long long max_bytes, max_bytes_src, max_bytes_dst, max_blocks; 664 int rc = 0; 665 unsigned short nolb; 666 unsigned int copied_bytes = 0; 667 sense_reason_t sense_rc; 668 669 sense_rc = target_parse_xcopy_cmd(xop); 670 if (sense_rc != TCM_NO_SENSE) 671 goto err_free; 672 673 if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev)) { 674 sense_rc = TCM_INVALID_PARAMETER_LIST; 675 goto err_free; 676 } 677 678 src_dev = xop->src_dev; 679 dst_dev = xop->dst_dev; 680 src_lba = xop->src_lba; 681 dst_lba = xop->dst_lba; 682 nolb = xop->nolb; 683 end_lba = src_lba + nolb; 684 /* 685 * Break up XCOPY I/O into hw_max_sectors * hw_block_size sized 686 * I/O based on the smallest max_bytes between src_dev + dst_dev 687 */ 688 max_bytes_src = (unsigned long long) src_dev->dev_attrib.hw_max_sectors * 689 src_dev->dev_attrib.hw_block_size; 690 max_bytes_dst = (unsigned long long) dst_dev->dev_attrib.hw_max_sectors * 691 dst_dev->dev_attrib.hw_block_size; 692 693 max_bytes = min_t(u64, max_bytes_src, max_bytes_dst); 694 max_bytes = min_t(u64, max_bytes, XCOPY_MAX_BYTES); 695 696 /* 697 * Using shift instead of the division because otherwise GCC 698 * generates __udivdi3 that is missing on i386 699 */ 700 max_blocks = max_bytes >> ilog2(src_dev->dev_attrib.block_size); 701 702 pr_debug("%s: nolb: %u, max_blocks: %llu end_lba: %llu\n", __func__, 703 nolb, max_blocks, (unsigned long long)end_lba); 704 pr_debug("%s: Starting src_lba: %llu, dst_lba: %llu\n", __func__, 705 (unsigned long long)src_lba, (unsigned long long)dst_lba); 706 707 while (nolb) { 708 u32 cur_bytes = min_t(u64, max_bytes, nolb * src_dev->dev_attrib.block_size); 709 unsigned short cur_nolb = cur_bytes / src_dev->dev_attrib.block_size; 710 711 if (cur_bytes != xop->xop_data_bytes) { 712 /* 713 * (Re)allocate a buffer large enough to hold the XCOPY 714 * I/O size, which can be reused each read / write loop. 715 */ 716 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 717 rc = target_alloc_sgl(&xop->xop_data_sg, 718 &xop->xop_data_nents, 719 cur_bytes, 720 false, false); 721 if (rc < 0) 722 goto out; 723 xop->xop_data_bytes = cur_bytes; 724 } 725 726 pr_debug("%s: Calling read src_dev: %p src_lba: %llu, cur_nolb: %hu\n", 727 __func__, src_dev, (unsigned long long)src_lba, cur_nolb); 728 729 rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_bytes); 730 if (rc < 0) 731 goto out; 732 733 src_lba += cur_bytes / src_dev->dev_attrib.block_size; 734 pr_debug("%s: Incremented READ src_lba to %llu\n", __func__, 735 (unsigned long long)src_lba); 736 737 pr_debug("%s: Calling write dst_dev: %p dst_lba: %llu, cur_nolb: %u\n", 738 __func__, dst_dev, (unsigned long long)dst_lba, cur_nolb); 739 740 rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev, 741 dst_lba, cur_bytes); 742 if (rc < 0) 743 goto out; 744 745 dst_lba += cur_bytes / dst_dev->dev_attrib.block_size; 746 pr_debug("%s: Incremented WRITE dst_lba to %llu\n", __func__, 747 (unsigned long long)dst_lba); 748 749 copied_bytes += cur_bytes; 750 nolb -= cur_bytes / src_dev->dev_attrib.block_size; 751 } 752 753 xcopy_pt_undepend_remotedev(xop); 754 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 755 kfree(xop); 756 757 pr_debug("%s: Final src_lba: %llu, dst_lba: %llu\n", __func__, 758 (unsigned long long)src_lba, (unsigned long long)dst_lba); 759 pr_debug("%s: Blocks copied: %u, Bytes Copied: %u\n", __func__, 760 copied_bytes / dst_dev->dev_attrib.block_size, copied_bytes); 761 762 pr_debug("%s: Setting X-COPY GOOD status -> sending response\n", __func__); 763 target_complete_cmd(ec_cmd, SAM_STAT_GOOD); 764 return; 765 766 out: 767 /* 768 * The XCOPY command was aborted after some data was transferred. 769 * Terminate command with CHECK CONDITION status, with the sense key 770 * set to COPY ABORTED. 771 */ 772 sense_rc = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE; 773 xcopy_pt_undepend_remotedev(xop); 774 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents); 775 776 err_free: 777 kfree(xop); 778 pr_warn_ratelimited("%s: rc: %d, sense: %u, XCOPY operation failed\n", 779 __func__, rc, sense_rc); 780 target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc); 781 } 782 783 /* 784 * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing 785 * fails. 786 */ 787 static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop) 788 { 789 struct se_cmd *se_cmd = xop->xop_se_cmd; 790 unsigned char *p = NULL, *seg_desc; 791 unsigned int list_id, list_id_usage, sdll, inline_dl; 792 sense_reason_t ret = TCM_INVALID_PARAMETER_LIST; 793 int rc; 794 unsigned short tdll; 795 796 p = transport_kmap_data_sg(se_cmd); 797 if (!p) { 798 pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n"); 799 return TCM_OUT_OF_RESOURCES; 800 } 801 802 list_id = p[0]; 803 list_id_usage = (p[1] & 0x18) >> 3; 804 805 /* 806 * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH 807 */ 808 tdll = get_unaligned_be16(&p[2]); 809 sdll = get_unaligned_be32(&p[8]); 810 if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) { 811 pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", 812 tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN); 813 ret = TCM_PARAMETER_LIST_LENGTH_ERROR; 814 goto out; 815 } 816 817 inline_dl = get_unaligned_be32(&p[12]); 818 if (inline_dl != 0) { 819 pr_err("XCOPY with non zero inline data length\n"); 820 goto out; 821 } 822 823 if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) { 824 pr_err("XCOPY parameter truncation: data length %u too small " 825 "for tdll: %hu sdll: %u inline_dl: %u\n", 826 se_cmd->data_length, tdll, sdll, inline_dl); 827 ret = TCM_PARAMETER_LIST_LENGTH_ERROR; 828 goto out; 829 } 830 831 pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" 832 " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, 833 tdll, sdll, inline_dl); 834 835 /* 836 * skip over the target descriptors until segment descriptors 837 * have been passed - CSCD ids are needed to determine src and dest. 838 */ 839 seg_desc = &p[16] + tdll; 840 841 rc = target_xcopy_parse_segment_descriptors(xop, seg_desc, sdll, &ret); 842 if (rc <= 0) 843 goto out; 844 845 pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, 846 rc * XCOPY_SEGMENT_DESC_LEN); 847 848 rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret); 849 if (rc <= 0) 850 goto out; 851 852 if (xop->src_dev->dev_attrib.block_size != 853 xop->dst_dev->dev_attrib.block_size) { 854 pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev" 855 " block_size: %u currently unsupported\n", 856 xop->src_dev->dev_attrib.block_size, 857 xop->dst_dev->dev_attrib.block_size); 858 xcopy_pt_undepend_remotedev(xop); 859 ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 860 goto out; 861 } 862 863 pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, 864 rc * XCOPY_TARGET_DESC_LEN); 865 transport_kunmap_data_sg(se_cmd); 866 return TCM_NO_SENSE; 867 868 out: 869 if (p) 870 transport_kunmap_data_sg(se_cmd); 871 return ret; 872 } 873 874 sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) 875 { 876 struct se_device *dev = se_cmd->se_dev; 877 struct xcopy_op *xop; 878 unsigned int sa; 879 880 if (!dev->dev_attrib.emulate_3pc) { 881 pr_err("EXTENDED_COPY operation explicitly disabled\n"); 882 return TCM_UNSUPPORTED_SCSI_OPCODE; 883 } 884 885 sa = se_cmd->t_task_cdb[1] & 0x1f; 886 if (sa != 0x00) { 887 pr_err("EXTENDED_COPY(LID4) not supported\n"); 888 return TCM_UNSUPPORTED_SCSI_OPCODE; 889 } 890 891 if (se_cmd->data_length == 0) { 892 target_complete_cmd(se_cmd, SAM_STAT_GOOD); 893 return TCM_NO_SENSE; 894 } 895 if (se_cmd->data_length < XCOPY_HDR_LEN) { 896 pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", 897 se_cmd->data_length, XCOPY_HDR_LEN); 898 return TCM_PARAMETER_LIST_LENGTH_ERROR; 899 } 900 901 xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); 902 if (!xop) 903 goto err; 904 xop->xop_se_cmd = se_cmd; 905 INIT_WORK(&xop->xop_work, target_xcopy_do_work); 906 if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work))) 907 goto free; 908 return TCM_NO_SENSE; 909 910 free: 911 kfree(xop); 912 913 err: 914 return TCM_OUT_OF_RESOURCES; 915 } 916 917 static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd) 918 { 919 unsigned char *p; 920 921 p = transport_kmap_data_sg(se_cmd); 922 if (!p) { 923 pr_err("transport_kmap_data_sg failed in" 924 " target_rcr_operating_parameters\n"); 925 return TCM_OUT_OF_RESOURCES; 926 } 927 928 if (se_cmd->data_length < 54) { 929 pr_err("Receive Copy Results Op Parameters length" 930 " too small: %u\n", se_cmd->data_length); 931 transport_kunmap_data_sg(se_cmd); 932 return TCM_INVALID_CDB_FIELD; 933 } 934 /* 935 * Set SNLID=1 (Supports no List ID) 936 */ 937 p[4] = 0x1; 938 /* 939 * MAXIMUM TARGET DESCRIPTOR COUNT 940 */ 941 put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]); 942 /* 943 * MAXIMUM SEGMENT DESCRIPTOR COUNT 944 */ 945 put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]); 946 /* 947 * MAXIMUM DESCRIPTOR LIST LENGTH 948 */ 949 put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]); 950 /* 951 * MAXIMUM SEGMENT LENGTH 952 */ 953 put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]); 954 /* 955 * MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED) 956 */ 957 put_unaligned_be32(0x0, &p[20]); 958 /* 959 * HELD DATA LIMIT 960 */ 961 put_unaligned_be32(0x0, &p[24]); 962 /* 963 * MAXIMUM STREAM DEVICE TRANSFER SIZE 964 */ 965 put_unaligned_be32(0x0, &p[28]); 966 /* 967 * TOTAL CONCURRENT COPIES 968 */ 969 put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]); 970 /* 971 * MAXIMUM CONCURRENT COPIES 972 */ 973 p[36] = RCR_OP_MAX_CONCURR_COPIES; 974 /* 975 * DATA SEGMENT GRANULARITY (log 2) 976 */ 977 p[37] = RCR_OP_DATA_SEG_GRAN_LOG2; 978 /* 979 * INLINE DATA GRANULARITY log 2) 980 */ 981 p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2; 982 /* 983 * HELD DATA GRANULARITY 984 */ 985 p[39] = RCR_OP_HELD_DATA_GRAN_LOG2; 986 /* 987 * IMPLEMENTED DESCRIPTOR LIST LENGTH 988 */ 989 p[43] = 0x2; 990 /* 991 * List of implemented descriptor type codes (ordered) 992 */ 993 p[44] = 0x02; /* Copy Block to Block device */ 994 p[45] = 0xe4; /* Identification descriptor target descriptor */ 995 996 /* 997 * AVAILABLE DATA (n-3) 998 */ 999 put_unaligned_be32(42, &p[0]); 1000 1001 transport_kunmap_data_sg(se_cmd); 1002 target_complete_cmd(se_cmd, SAM_STAT_GOOD); 1003 1004 return TCM_NO_SENSE; 1005 } 1006 1007 sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd) 1008 { 1009 unsigned char *cdb = &se_cmd->t_task_cdb[0]; 1010 int sa = (cdb[1] & 0x1f), list_id = cdb[2]; 1011 struct se_device *dev = se_cmd->se_dev; 1012 sense_reason_t rc = TCM_NO_SENSE; 1013 1014 if (!dev->dev_attrib.emulate_3pc) { 1015 pr_debug("Third-party copy operations explicitly disabled\n"); 1016 return TCM_UNSUPPORTED_SCSI_OPCODE; 1017 } 1018 1019 pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:" 1020 " 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length); 1021 1022 if (list_id != 0) { 1023 pr_err("Receive Copy Results with non zero list identifier" 1024 " not supported\n"); 1025 return TCM_INVALID_CDB_FIELD; 1026 } 1027 1028 switch (sa) { 1029 case RCR_SA_OPERATING_PARAMETERS: 1030 rc = target_rcr_operating_parameters(se_cmd); 1031 break; 1032 case RCR_SA_COPY_STATUS: 1033 case RCR_SA_RECEIVE_DATA: 1034 case RCR_SA_FAILED_SEGMENT_DETAILS: 1035 default: 1036 pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa); 1037 return TCM_INVALID_CDB_FIELD; 1038 } 1039 1040 return rc; 1041 } 1042