1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * SCSI Primary Commands (SPC) parsing and emulation. 4 * 5 * (c) Copyright 2002-2013 Datera, Inc. 6 * 7 * Nicholas A. Bellinger <nab@kernel.org> 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/unaligned.h> 13 14 #include <scsi/scsi_proto.h> 15 #include <scsi/scsi_common.h> 16 #include <scsi/scsi_tcq.h> 17 18 #include <target/target_core_base.h> 19 #include <target/target_core_backend.h> 20 #include <target/target_core_fabric.h> 21 22 #include "target_core_internal.h" 23 #include "target_core_alua.h" 24 #include "target_core_pr.h" 25 #include "target_core_ua.h" 26 #include "target_core_xcopy.h" 27 28 static void spc_fill_alua_data(struct se_lun *lun, unsigned char *buf) 29 { 30 struct t10_alua_tg_pt_gp *tg_pt_gp; 31 32 /* 33 * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS. 34 */ 35 buf[5] = 0x80; 36 37 /* 38 * Set TPGS field for explicit and/or implicit ALUA access type 39 * and opteration. 40 * 41 * See spc4r17 section 6.4.2 Table 135 42 */ 43 rcu_read_lock(); 44 tg_pt_gp = rcu_dereference(lun->lun_tg_pt_gp); 45 if (tg_pt_gp) 46 buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type; 47 rcu_read_unlock(); 48 } 49 50 static u16 51 spc_find_scsi_transport_vd(int proto_id) 52 { 53 switch (proto_id) { 54 case SCSI_PROTOCOL_FCP: 55 return SCSI_VERSION_DESCRIPTOR_FCP4; 56 case SCSI_PROTOCOL_ISCSI: 57 return SCSI_VERSION_DESCRIPTOR_ISCSI; 58 case SCSI_PROTOCOL_SAS: 59 return SCSI_VERSION_DESCRIPTOR_SAS3; 60 case SCSI_PROTOCOL_SBP: 61 return SCSI_VERSION_DESCRIPTOR_SBP3; 62 case SCSI_PROTOCOL_SRP: 63 return SCSI_VERSION_DESCRIPTOR_SRP; 64 default: 65 pr_warn("Cannot find VERSION DESCRIPTOR value for unknown SCSI" 66 " transport PROTOCOL IDENTIFIER %#x\n", proto_id); 67 return 0; 68 } 69 } 70 71 sense_reason_t 72 spc_emulate_inquiry_std(struct se_cmd *cmd, unsigned char *buf) 73 { 74 struct se_lun *lun = cmd->se_lun; 75 struct se_portal_group *tpg = lun->lun_tpg; 76 struct se_device *dev = cmd->se_dev; 77 struct se_session *sess = cmd->se_sess; 78 79 /* Set RMB (removable media) for tape devices */ 80 if (dev->transport->get_device_type(dev) == TYPE_TAPE) 81 buf[1] = 0x80; 82 83 buf[2] = 0x06; /* SPC-4 */ 84 85 /* 86 * NORMACA and HISUP = 0, RESPONSE DATA FORMAT = 2 87 * 88 * SPC4 says: 89 * A RESPONSE DATA FORMAT field set to 2h indicates that the 90 * standard INQUIRY data is in the format defined in this 91 * standard. Response data format values less than 2h are 92 * obsolete. Response data format values greater than 2h are 93 * reserved. 94 */ 95 buf[3] = 2; 96 97 /* 98 * Enable SCCS and TPGS fields for Emulated ALUA 99 */ 100 spc_fill_alua_data(lun, buf); 101 102 /* 103 * Set Third-Party Copy (3PC) bit to indicate support for EXTENDED_COPY 104 */ 105 if (dev->dev_attrib.emulate_3pc) 106 buf[5] |= 0x8; 107 /* 108 * Set Protection (PROTECT) bit when DIF has been enabled on the 109 * device, and the fabric supports VERIFY + PASS. Also report 110 * PROTECT=1 if sess_prot_type has been configured to allow T10-PI 111 * to unprotected devices. 112 */ 113 if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { 114 if (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type) 115 buf[5] |= 0x1; 116 } 117 118 /* 119 * Set MULTIP bit to indicate presence of multiple SCSI target ports 120 */ 121 if (dev->export_count > 1) 122 buf[6] |= 0x10; 123 124 buf[7] = 0x2; /* CmdQue=1 */ 125 126 /* 127 * ASCII data fields described as being left-aligned shall have any 128 * unused bytes at the end of the field (i.e., highest offset) and the 129 * unused bytes shall be filled with ASCII space characters (20h). 130 */ 131 memset(&buf[8], 0x20, 132 INQUIRY_VENDOR_LEN + INQUIRY_MODEL_LEN + INQUIRY_REVISION_LEN); 133 memcpy(&buf[8], dev->t10_wwn.vendor, 134 strnlen(dev->t10_wwn.vendor, INQUIRY_VENDOR_LEN)); 135 memcpy(&buf[16], dev->t10_wwn.model, 136 strnlen(dev->t10_wwn.model, INQUIRY_MODEL_LEN)); 137 memcpy(&buf[32], dev->t10_wwn.revision, 138 strnlen(dev->t10_wwn.revision, INQUIRY_REVISION_LEN)); 139 140 /* 141 * Set the VERSION DESCRIPTOR fields 142 */ 143 put_unaligned_be16(SCSI_VERSION_DESCRIPTOR_SAM5, &buf[58]); 144 put_unaligned_be16(spc_find_scsi_transport_vd(tpg->proto_id), &buf[60]); 145 put_unaligned_be16(SCSI_VERSION_DESCRIPTOR_SPC4, &buf[62]); 146 if (cmd->se_dev->transport->get_device_type(dev) == TYPE_DISK) 147 put_unaligned_be16(SCSI_VERSION_DESCRIPTOR_SBC3, &buf[64]); 148 149 buf[4] = 91; /* Set additional length to 91 */ 150 151 return 0; 152 } 153 EXPORT_SYMBOL(spc_emulate_inquiry_std); 154 155 /* unit serial number */ 156 static sense_reason_t 157 spc_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) 158 { 159 struct se_device *dev = cmd->se_dev; 160 u16 len; 161 162 if (dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) { 163 len = sprintf(&buf[4], "%s", dev->t10_wwn.unit_serial); 164 len++; /* Extra Byte for NULL Terminator */ 165 buf[3] = len; 166 } 167 return 0; 168 } 169 170 /* 171 * Generate NAA IEEE Registered Extended designator 172 */ 173 void spc_gen_naa_6h_vendor_specific(struct se_device *dev, 174 unsigned char *buf) 175 { 176 unsigned char *p = &dev->t10_wwn.unit_serial[0]; 177 u32 company_id = dev->t10_wwn.company_id; 178 int cnt, off = 0; 179 bool next = true; 180 181 /* 182 * Start NAA IEEE Registered Extended Identifier/Designator 183 */ 184 buf[off] = 0x6 << 4; 185 186 /* IEEE COMPANY_ID */ 187 buf[off++] |= (company_id >> 20) & 0xf; 188 buf[off++] = (company_id >> 12) & 0xff; 189 buf[off++] = (company_id >> 4) & 0xff; 190 buf[off] = (company_id & 0xf) << 4; 191 192 /* 193 * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on 194 * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field 195 * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION 196 * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL 197 * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure 198 * per device uniqeness. 199 */ 200 for (cnt = off + 13; *p && off < cnt; p++) { 201 int val = hex_to_bin(*p); 202 203 if (val < 0) 204 continue; 205 206 if (next) { 207 next = false; 208 buf[off++] |= val; 209 } else { 210 next = true; 211 buf[off] = val << 4; 212 } 213 } 214 } 215 216 /* 217 * Device identification VPD, for a complete list of 218 * DESIGNATOR TYPEs see spc4r17 Table 459. 219 */ 220 sense_reason_t 221 spc_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) 222 { 223 struct se_device *dev = cmd->se_dev; 224 struct se_lun *lun = cmd->se_lun; 225 struct se_portal_group *tpg = NULL; 226 struct t10_alua_lu_gp_member *lu_gp_mem; 227 struct t10_alua_tg_pt_gp *tg_pt_gp; 228 unsigned char *prod = &dev->t10_wwn.model[0]; 229 u32 off = 0; 230 u16 len = 0, id_len; 231 232 off = 4; 233 234 /* 235 * NAA IEEE Registered Extended Assigned designator format, see 236 * spc4r17 section 7.7.3.6.5 237 * 238 * We depend upon a target_core_mod/ConfigFS provided 239 * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial 240 * value in order to return the NAA id. 241 */ 242 if (!(dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL)) 243 goto check_t10_vend_desc; 244 245 /* CODE SET == Binary */ 246 buf[off++] = 0x1; 247 248 /* Set ASSOCIATION == addressed logical unit: 0)b */ 249 buf[off] = 0x00; 250 251 /* Identifier/Designator type == NAA identifier */ 252 buf[off++] |= 0x3; 253 off++; 254 255 /* Identifier/Designator length */ 256 buf[off++] = 0x10; 257 258 /* NAA IEEE Registered Extended designator */ 259 spc_gen_naa_6h_vendor_specific(dev, &buf[off]); 260 261 len = 20; 262 off = (len + 4); 263 264 check_t10_vend_desc: 265 /* 266 * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4 267 */ 268 id_len = 8; /* For Vendor field */ 269 270 if (dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) 271 id_len += sprintf(&buf[off+12], "%s:%s", prod, 272 &dev->t10_wwn.unit_serial[0]); 273 buf[off] = 0x2; /* ASCII */ 274 buf[off+1] = 0x1; /* T10 Vendor ID */ 275 buf[off+2] = 0x0; 276 /* left align Vendor ID and pad with spaces */ 277 memset(&buf[off+4], 0x20, INQUIRY_VENDOR_LEN); 278 memcpy(&buf[off+4], dev->t10_wwn.vendor, 279 strnlen(dev->t10_wwn.vendor, INQUIRY_VENDOR_LEN)); 280 /* Extra Byte for NULL Terminator */ 281 id_len++; 282 /* Identifier Length */ 283 buf[off+3] = id_len; 284 /* Header size for Designation descriptor */ 285 len += (id_len + 4); 286 off += (id_len + 4); 287 288 if (1) { 289 struct t10_alua_lu_gp *lu_gp; 290 u32 padding, scsi_name_len, scsi_target_len; 291 u16 lu_gp_id = 0; 292 u16 tg_pt_gp_id = 0; 293 u16 tpgt; 294 295 tpg = lun->lun_tpg; 296 /* 297 * Relative target port identifer, see spc4r17 298 * section 7.7.3.7 299 * 300 * Get the PROTOCOL IDENTIFIER as defined by spc4r17 301 * section 7.5.1 Table 362 302 */ 303 buf[off] = tpg->proto_id << 4; 304 buf[off++] |= 0x1; /* CODE SET == Binary */ 305 buf[off] = 0x80; /* Set PIV=1 */ 306 /* Set ASSOCIATION == target port: 01b */ 307 buf[off] |= 0x10; 308 /* DESIGNATOR TYPE == Relative target port identifer */ 309 buf[off++] |= 0x4; 310 off++; /* Skip over Reserved */ 311 buf[off++] = 4; /* DESIGNATOR LENGTH */ 312 /* Skip over Obsolete field in RTPI payload 313 * in Table 472 */ 314 off += 2; 315 put_unaligned_be16(lun->lun_tpg->tpg_rtpi, &buf[off]); 316 off += 2; 317 len += 8; /* Header size + Designation descriptor */ 318 /* 319 * Target port group identifier, see spc4r17 320 * section 7.7.3.8 321 * 322 * Get the PROTOCOL IDENTIFIER as defined by spc4r17 323 * section 7.5.1 Table 362 324 */ 325 rcu_read_lock(); 326 tg_pt_gp = rcu_dereference(lun->lun_tg_pt_gp); 327 if (!tg_pt_gp) { 328 rcu_read_unlock(); 329 goto check_lu_gp; 330 } 331 tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id; 332 rcu_read_unlock(); 333 334 buf[off] = tpg->proto_id << 4; 335 buf[off++] |= 0x1; /* CODE SET == Binary */ 336 buf[off] = 0x80; /* Set PIV=1 */ 337 /* Set ASSOCIATION == target port: 01b */ 338 buf[off] |= 0x10; 339 /* DESIGNATOR TYPE == Target port group identifier */ 340 buf[off++] |= 0x5; 341 off++; /* Skip over Reserved */ 342 buf[off++] = 4; /* DESIGNATOR LENGTH */ 343 off += 2; /* Skip over Reserved Field */ 344 put_unaligned_be16(tg_pt_gp_id, &buf[off]); 345 off += 2; 346 len += 8; /* Header size + Designation descriptor */ 347 /* 348 * Logical Unit Group identifier, see spc4r17 349 * section 7.7.3.8 350 */ 351 check_lu_gp: 352 lu_gp_mem = dev->dev_alua_lu_gp_mem; 353 if (!lu_gp_mem) 354 goto check_scsi_name; 355 356 spin_lock(&lu_gp_mem->lu_gp_mem_lock); 357 lu_gp = lu_gp_mem->lu_gp; 358 if (!lu_gp) { 359 spin_unlock(&lu_gp_mem->lu_gp_mem_lock); 360 goto check_scsi_name; 361 } 362 lu_gp_id = lu_gp->lu_gp_id; 363 spin_unlock(&lu_gp_mem->lu_gp_mem_lock); 364 365 buf[off++] |= 0x1; /* CODE SET == Binary */ 366 /* DESIGNATOR TYPE == Logical Unit Group identifier */ 367 buf[off++] |= 0x6; 368 off++; /* Skip over Reserved */ 369 buf[off++] = 4; /* DESIGNATOR LENGTH */ 370 off += 2; /* Skip over Reserved Field */ 371 put_unaligned_be16(lu_gp_id, &buf[off]); 372 off += 2; 373 len += 8; /* Header size + Designation descriptor */ 374 /* 375 * SCSI name string designator, see spc4r17 376 * section 7.7.3.11 377 * 378 * Get the PROTOCOL IDENTIFIER as defined by spc4r17 379 * section 7.5.1 Table 362 380 */ 381 check_scsi_name: 382 buf[off] = tpg->proto_id << 4; 383 buf[off++] |= 0x3; /* CODE SET == UTF-8 */ 384 buf[off] = 0x80; /* Set PIV=1 */ 385 /* Set ASSOCIATION == target port: 01b */ 386 buf[off] |= 0x10; 387 /* DESIGNATOR TYPE == SCSI name string */ 388 buf[off++] |= 0x8; 389 off += 2; /* Skip over Reserved and length */ 390 /* 391 * SCSI name string identifer containing, $FABRIC_MOD 392 * dependent information. For LIO-Target and iSCSI 393 * Target Port, this means "<iSCSI name>,t,0x<TPGT> in 394 * UTF-8 encoding. 395 */ 396 tpgt = tpg->se_tpg_tfo->tpg_get_tag(tpg); 397 scsi_name_len = sprintf(&buf[off], "%s,t,0x%04x", 398 tpg->se_tpg_tfo->tpg_get_wwn(tpg), tpgt); 399 scsi_name_len += 1 /* Include NULL terminator */; 400 /* 401 * The null-terminated, null-padded (see 4.4.2) SCSI 402 * NAME STRING field contains a UTF-8 format string. 403 * The number of bytes in the SCSI NAME STRING field 404 * (i.e., the value in the DESIGNATOR LENGTH field) 405 * shall be no larger than 256 and shall be a multiple 406 * of four. 407 */ 408 padding = ((-scsi_name_len) & 3); 409 if (padding) 410 scsi_name_len += padding; 411 if (scsi_name_len > 256) 412 scsi_name_len = 256; 413 414 buf[off-1] = scsi_name_len; 415 off += scsi_name_len; 416 /* Header size + Designation descriptor */ 417 len += (scsi_name_len + 4); 418 419 /* 420 * Target device designator 421 */ 422 buf[off] = tpg->proto_id << 4; 423 buf[off++] |= 0x3; /* CODE SET == UTF-8 */ 424 buf[off] = 0x80; /* Set PIV=1 */ 425 /* Set ASSOCIATION == target device: 10b */ 426 buf[off] |= 0x20; 427 /* DESIGNATOR TYPE == SCSI name string */ 428 buf[off++] |= 0x8; 429 off += 2; /* Skip over Reserved and length */ 430 /* 431 * SCSI name string identifer containing, $FABRIC_MOD 432 * dependent information. For LIO-Target and iSCSI 433 * Target Port, this means "<iSCSI name>" in 434 * UTF-8 encoding. 435 */ 436 scsi_target_len = sprintf(&buf[off], "%s", 437 tpg->se_tpg_tfo->tpg_get_wwn(tpg)); 438 scsi_target_len += 1 /* Include NULL terminator */; 439 /* 440 * The null-terminated, null-padded (see 4.4.2) SCSI 441 * NAME STRING field contains a UTF-8 format string. 442 * The number of bytes in the SCSI NAME STRING field 443 * (i.e., the value in the DESIGNATOR LENGTH field) 444 * shall be no larger than 256 and shall be a multiple 445 * of four. 446 */ 447 padding = ((-scsi_target_len) & 3); 448 if (padding) 449 scsi_target_len += padding; 450 if (scsi_target_len > 256) 451 scsi_target_len = 256; 452 453 buf[off-1] = scsi_target_len; 454 off += scsi_target_len; 455 456 /* Header size + Designation descriptor */ 457 len += (scsi_target_len + 4); 458 } 459 put_unaligned_be16(len, &buf[2]); /* Page Length for VPD 0x83 */ 460 return 0; 461 } 462 EXPORT_SYMBOL(spc_emulate_evpd_83); 463 464 /* Extended INQUIRY Data VPD Page */ 465 static sense_reason_t 466 spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) 467 { 468 struct se_device *dev = cmd->se_dev; 469 struct se_session *sess = cmd->se_sess; 470 471 buf[3] = 0x3c; 472 /* 473 * Set GRD_CHK + REF_CHK for TYPE1 protection, or GRD_CHK 474 * only for TYPE3 protection. 475 */ 476 if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { 477 if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT || 478 cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE1_PROT) 479 buf[4] = 0x5; 480 else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT || 481 cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT) 482 buf[4] = 0x4; 483 } 484 485 /* logical unit supports type 1 and type 3 protection */ 486 if ((dev->transport->get_device_type(dev) == TYPE_DISK) && 487 (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) && 488 (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type)) { 489 buf[4] |= (0x3 << 3); 490 } 491 492 /* Set HEADSUP, ORDSUP, SIMPSUP */ 493 buf[5] = 0x07; 494 495 /* If WriteCache emulation is enabled, set V_SUP */ 496 if (target_check_wce(dev)) 497 buf[6] = 0x01; 498 /* If an LBA map is present set R_SUP */ 499 spin_lock(&cmd->se_dev->t10_alua.lba_map_lock); 500 if (!list_empty(&dev->t10_alua.lba_map_list)) 501 buf[8] = 0x10; 502 spin_unlock(&cmd->se_dev->t10_alua.lba_map_lock); 503 return 0; 504 } 505 506 /* Block Limits VPD page */ 507 static sense_reason_t 508 spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) 509 { 510 struct se_device *dev = cmd->se_dev; 511 u32 mtl = 0; 512 int have_tp = 0, opt, min; 513 u32 io_max_blocks; 514 515 /* 516 * Following spc3r22 section 6.5.3 Block Limits VPD page, when 517 * emulate_tpu=1 or emulate_tpws=1 we will be expect a 518 * different page length for Thin Provisioning. 519 */ 520 if (dev->dev_attrib.emulate_tpu || dev->dev_attrib.emulate_tpws) 521 have_tp = 1; 522 523 buf[0] = dev->transport->get_device_type(dev); 524 buf[3] = have_tp ? 0x3c : 0x10; 525 526 /* Set WSNZ to 1 */ 527 buf[4] = 0x01; 528 /* 529 * Set MAXIMUM COMPARE AND WRITE LENGTH 530 */ 531 if (dev->dev_attrib.emulate_caw) 532 buf[5] = 0x01; 533 534 /* 535 * Set OPTIMAL TRANSFER LENGTH GRANULARITY 536 */ 537 if (dev->transport->get_io_min && (min = dev->transport->get_io_min(dev))) 538 put_unaligned_be16(min / dev->dev_attrib.block_size, &buf[6]); 539 else 540 put_unaligned_be16(1, &buf[6]); 541 542 /* 543 * Set MAXIMUM TRANSFER LENGTH 544 * 545 * XXX: Currently assumes single PAGE_SIZE per scatterlist for fabrics 546 * enforcing maximum HW scatter-gather-list entry limit 547 */ 548 if (cmd->se_tfo->max_data_sg_nents) { 549 mtl = (cmd->se_tfo->max_data_sg_nents * PAGE_SIZE) / 550 dev->dev_attrib.block_size; 551 } 552 io_max_blocks = mult_frac(dev->dev_attrib.hw_max_sectors, 553 dev->dev_attrib.hw_block_size, 554 dev->dev_attrib.block_size); 555 put_unaligned_be32(min_not_zero(mtl, io_max_blocks), &buf[8]); 556 557 /* 558 * Set OPTIMAL TRANSFER LENGTH 559 */ 560 if (dev->transport->get_io_opt && (opt = dev->transport->get_io_opt(dev))) 561 put_unaligned_be32(opt / dev->dev_attrib.block_size, &buf[12]); 562 else 563 put_unaligned_be32(dev->dev_attrib.optimal_sectors, &buf[12]); 564 565 /* 566 * Exit now if we don't support TP. 567 */ 568 if (!have_tp) 569 goto max_write_same; 570 571 /* 572 * Set MAXIMUM UNMAP LBA COUNT 573 */ 574 put_unaligned_be32(dev->dev_attrib.max_unmap_lba_count, &buf[20]); 575 576 /* 577 * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT 578 */ 579 put_unaligned_be32(dev->dev_attrib.max_unmap_block_desc_count, 580 &buf[24]); 581 582 /* 583 * Set OPTIMAL UNMAP GRANULARITY 584 */ 585 put_unaligned_be32(dev->dev_attrib.unmap_granularity, &buf[28]); 586 587 /* 588 * UNMAP GRANULARITY ALIGNMENT 589 */ 590 put_unaligned_be32(dev->dev_attrib.unmap_granularity_alignment, 591 &buf[32]); 592 if (dev->dev_attrib.unmap_granularity_alignment != 0) 593 buf[32] |= 0x80; /* Set the UGAVALID bit */ 594 595 /* 596 * MAXIMUM WRITE SAME LENGTH 597 */ 598 max_write_same: 599 put_unaligned_be64(dev->dev_attrib.max_write_same_len, &buf[36]); 600 601 return 0; 602 } 603 604 /* Block Device Characteristics VPD page */ 605 static sense_reason_t 606 spc_emulate_evpd_b1(struct se_cmd *cmd, unsigned char *buf) 607 { 608 struct se_device *dev = cmd->se_dev; 609 610 buf[0] = dev->transport->get_device_type(dev); 611 buf[3] = 0x3c; 612 buf[5] = dev->dev_attrib.is_nonrot ? 1 : 0; 613 614 return 0; 615 } 616 617 /* Thin Provisioning VPD */ 618 static sense_reason_t 619 spc_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf) 620 { 621 struct se_device *dev = cmd->se_dev; 622 623 /* 624 * From spc3r22 section 6.5.4 Thin Provisioning VPD page: 625 * 626 * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to 627 * zero, then the page length shall be set to 0004h. If the DP bit 628 * is set to one, then the page length shall be set to the value 629 * defined in table 162. 630 */ 631 buf[0] = dev->transport->get_device_type(dev); 632 633 /* 634 * Set Hardcoded length mentioned above for DP=0 635 */ 636 put_unaligned_be16(0x0004, &buf[2]); 637 638 /* 639 * The THRESHOLD EXPONENT field indicates the threshold set size in 640 * LBAs as a power of 2 (i.e., the threshold set size is equal to 641 * 2(threshold exponent)). 642 * 643 * Note that this is currently set to 0x00 as mkp says it will be 644 * changing again. We can enable this once it has settled in T10 645 * and is actually used by Linux/SCSI ML code. 646 */ 647 buf[4] = 0x00; 648 649 /* 650 * A TPU bit set to one indicates that the device server supports 651 * the UNMAP command (see 5.25). A TPU bit set to zero indicates 652 * that the device server does not support the UNMAP command. 653 */ 654 if (dev->dev_attrib.emulate_tpu != 0) 655 buf[5] = 0x80; 656 657 /* 658 * A TPWS bit set to one indicates that the device server supports 659 * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs. 660 * A TPWS bit set to zero indicates that the device server does not 661 * support the use of the WRITE SAME (16) command to unmap LBAs. 662 */ 663 if (dev->dev_attrib.emulate_tpws != 0) 664 buf[5] |= 0x40 | 0x20; 665 666 /* 667 * The unmap_zeroes_data set means that the underlying device supports 668 * REQ_OP_DISCARD and has the discard_zeroes_data bit set. This 669 * satisfies the SBC requirements for LBPRZ, meaning that a subsequent 670 * read will return zeroes after an UNMAP or WRITE SAME (16) to an LBA 671 * See sbc4r36 6.6.4. 672 */ 673 if (((dev->dev_attrib.emulate_tpu != 0) || 674 (dev->dev_attrib.emulate_tpws != 0)) && 675 (dev->dev_attrib.unmap_zeroes_data != 0)) 676 buf[5] |= 0x04; 677 678 return 0; 679 } 680 681 /* Referrals VPD page */ 682 static sense_reason_t 683 spc_emulate_evpd_b3(struct se_cmd *cmd, unsigned char *buf) 684 { 685 struct se_device *dev = cmd->se_dev; 686 687 buf[0] = dev->transport->get_device_type(dev); 688 buf[3] = 0x0c; 689 put_unaligned_be32(dev->t10_alua.lba_map_segment_size, &buf[8]); 690 put_unaligned_be32(dev->t10_alua.lba_map_segment_multiplier, &buf[12]); 691 692 return 0; 693 } 694 695 static sense_reason_t 696 spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf); 697 698 static struct { 699 uint8_t page; 700 sense_reason_t (*emulate)(struct se_cmd *, unsigned char *); 701 } evpd_handlers[] = { 702 { .page = 0x00, .emulate = spc_emulate_evpd_00 }, 703 { .page = 0x80, .emulate = spc_emulate_evpd_80 }, 704 { .page = 0x83, .emulate = spc_emulate_evpd_83 }, 705 { .page = 0x86, .emulate = spc_emulate_evpd_86 }, 706 { .page = 0xb0, .emulate = spc_emulate_evpd_b0 }, 707 { .page = 0xb1, .emulate = spc_emulate_evpd_b1 }, 708 { .page = 0xb2, .emulate = spc_emulate_evpd_b2 }, 709 { .page = 0xb3, .emulate = spc_emulate_evpd_b3 }, 710 }; 711 712 /* supported vital product data pages */ 713 static sense_reason_t 714 spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf) 715 { 716 int p; 717 718 /* 719 * Only report the INQUIRY EVPD=1 pages after a valid NAA 720 * Registered Extended LUN WWN has been set via ConfigFS 721 * during device creation/restart. 722 */ 723 if (cmd->se_dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) { 724 buf[3] = ARRAY_SIZE(evpd_handlers); 725 for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) 726 buf[p + 4] = evpd_handlers[p].page; 727 } 728 729 return 0; 730 } 731 732 static sense_reason_t 733 spc_emulate_inquiry(struct se_cmd *cmd) 734 { 735 struct se_device *dev = cmd->se_dev; 736 unsigned char *rbuf; 737 unsigned char *cdb = cmd->t_task_cdb; 738 unsigned char *buf; 739 sense_reason_t ret; 740 int p; 741 int len = 0; 742 743 buf = kzalloc(SE_INQUIRY_BUF, GFP_KERNEL); 744 if (!buf) { 745 pr_err("Unable to allocate response buffer for INQUIRY\n"); 746 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 747 } 748 749 buf[0] = dev->transport->get_device_type(dev); 750 751 if (!(cdb[1] & 0x1)) { 752 if (cdb[2]) { 753 pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", 754 cdb[2]); 755 ret = TCM_INVALID_CDB_FIELD; 756 goto out; 757 } 758 759 ret = spc_emulate_inquiry_std(cmd, buf); 760 len = buf[4] + 5; 761 goto out; 762 } 763 764 for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) { 765 if (cdb[2] == evpd_handlers[p].page) { 766 buf[1] = cdb[2]; 767 ret = evpd_handlers[p].emulate(cmd, buf); 768 len = get_unaligned_be16(&buf[2]) + 4; 769 goto out; 770 } 771 } 772 773 pr_debug("Unknown VPD Code: 0x%02x\n", cdb[2]); 774 ret = TCM_INVALID_CDB_FIELD; 775 776 out: 777 rbuf = transport_kmap_data_sg(cmd); 778 if (rbuf) { 779 memcpy(rbuf, buf, min_t(u32, SE_INQUIRY_BUF, cmd->data_length)); 780 transport_kunmap_data_sg(cmd); 781 } 782 kfree(buf); 783 784 if (!ret) 785 target_complete_cmd_with_length(cmd, SAM_STAT_GOOD, len); 786 return ret; 787 } 788 789 static int spc_modesense_rwrecovery(struct se_cmd *cmd, u8 pc, u8 *p) 790 { 791 p[0] = 0x01; 792 p[1] = 0x0a; 793 794 /* No changeable values for now */ 795 if (pc == 1) 796 goto out; 797 798 out: 799 return 12; 800 } 801 802 static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p) 803 { 804 struct se_device *dev = cmd->se_dev; 805 struct se_session *sess = cmd->se_sess; 806 807 p[0] = 0x0a; 808 p[1] = 0x0a; 809 810 /* No changeable values for now */ 811 if (pc == 1) 812 goto out; 813 814 /* GLTSD: No implicit save of log parameters */ 815 p[2] = (1 << 1); 816 if (target_sense_desc_format(dev)) 817 /* D_SENSE: Descriptor format sense data for 64bit sectors */ 818 p[2] |= (1 << 2); 819 820 /* 821 * From spc4r23, 7.4.7 Control mode page 822 * 823 * The QUEUE ALGORITHM MODIFIER field (see table 368) specifies 824 * restrictions on the algorithm used for reordering commands 825 * having the SIMPLE task attribute (see SAM-4). 826 * 827 * Table 368 -- QUEUE ALGORITHM MODIFIER field 828 * Code Description 829 * 0h Restricted reordering 830 * 1h Unrestricted reordering allowed 831 * 2h to 7h Reserved 832 * 8h to Fh Vendor specific 833 * 834 * A value of zero in the QUEUE ALGORITHM MODIFIER field specifies that 835 * the device server shall order the processing sequence of commands 836 * having the SIMPLE task attribute such that data integrity is maintained 837 * for that I_T nexus (i.e., if the transmission of new SCSI transport protocol 838 * requests is halted at any time, the final value of all data observable 839 * on the medium shall be the same as if all the commands had been processed 840 * with the ORDERED task attribute). 841 * 842 * A value of one in the QUEUE ALGORITHM MODIFIER field specifies that the 843 * device server may reorder the processing sequence of commands having the 844 * SIMPLE task attribute in any manner. Any data integrity exposures related to 845 * command sequence order shall be explicitly handled by the application client 846 * through the selection of appropriate ommands and task attributes. 847 */ 848 p[3] = (dev->dev_attrib.emulate_rest_reord == 1) ? 0x00 : 0x10; 849 /* 850 * From spc4r17, section 7.4.6 Control mode Page 851 * 852 * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b 853 * 854 * 00b: The logical unit shall clear any unit attention condition 855 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION 856 * status and shall not establish a unit attention condition when a com- 857 * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT 858 * status. 859 * 860 * 10b: The logical unit shall not clear any unit attention condition 861 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION 862 * status and shall not establish a unit attention condition when 863 * a command is completed with BUSY, TASK SET FULL, or RESERVATION 864 * CONFLICT status. 865 * 866 * 11b a The logical unit shall not clear any unit attention condition 867 * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION 868 * status and shall establish a unit attention condition for the 869 * initiator port associated with the I_T nexus on which the BUSY, 870 * TASK SET FULL, or RESERVATION CONFLICT status is being returned. 871 * Depending on the status, the additional sense code shall be set to 872 * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS 873 * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE 874 * command, a unit attention condition shall be established only once 875 * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless 876 * to the number of commands completed with one of those status codes. 877 */ 878 switch (dev->dev_attrib.emulate_ua_intlck_ctrl) { 879 case TARGET_UA_INTLCK_CTRL_ESTABLISH_UA: 880 p[4] = 0x30; 881 break; 882 case TARGET_UA_INTLCK_CTRL_NO_CLEAR: 883 p[4] = 0x20; 884 break; 885 default: /* TARGET_UA_INTLCK_CTRL_CLEAR */ 886 p[4] = 0x00; 887 break; 888 } 889 /* 890 * From spc4r17, section 7.4.6 Control mode Page 891 * 892 * Task Aborted Status (TAS) bit set to zero. 893 * 894 * A task aborted status (TAS) bit set to zero specifies that aborted 895 * tasks shall be terminated by the device server without any response 896 * to the application client. A TAS bit set to one specifies that tasks 897 * aborted by the actions of an I_T nexus other than the I_T nexus on 898 * which the command was received shall be completed with TASK ABORTED 899 * status (see SAM-4). 900 */ 901 p[5] = (dev->dev_attrib.emulate_tas) ? 0x40 : 0x00; 902 /* 903 * From spc4r30, section 7.5.7 Control mode page 904 * 905 * Application Tag Owner (ATO) bit set to one. 906 * 907 * If the ATO bit is set to one the device server shall not modify the 908 * LOGICAL BLOCK APPLICATION TAG field and, depending on the protection 909 * type, shall not modify the contents of the LOGICAL BLOCK REFERENCE 910 * TAG field. 911 */ 912 if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { 913 if (dev->dev_attrib.pi_prot_type || sess->sess_prot_type) 914 p[5] |= 0x80; 915 } 916 917 p[8] = 0xff; 918 p[9] = 0xff; 919 p[11] = 30; 920 921 out: 922 return 12; 923 } 924 925 static int spc_modesense_caching(struct se_cmd *cmd, u8 pc, u8 *p) 926 { 927 struct se_device *dev = cmd->se_dev; 928 929 p[0] = 0x08; 930 p[1] = 0x12; 931 932 /* No changeable values for now */ 933 if (pc == 1) 934 goto out; 935 936 if (target_check_wce(dev)) 937 p[2] = 0x04; /* Write Cache Enable */ 938 p[12] = 0x20; /* Disabled Read Ahead */ 939 940 out: 941 return 20; 942 } 943 944 static int spc_modesense_informational_exceptions(struct se_cmd *cmd, u8 pc, unsigned char *p) 945 { 946 p[0] = 0x1c; 947 p[1] = 0x0a; 948 949 /* No changeable values for now */ 950 if (pc == 1) 951 goto out; 952 953 out: 954 return 12; 955 } 956 957 static struct { 958 uint8_t page; 959 uint8_t subpage; 960 int (*emulate)(struct se_cmd *, u8, unsigned char *); 961 } modesense_handlers[] = { 962 { .page = 0x01, .subpage = 0x00, .emulate = spc_modesense_rwrecovery }, 963 { .page = 0x08, .subpage = 0x00, .emulate = spc_modesense_caching }, 964 { .page = 0x0a, .subpage = 0x00, .emulate = spc_modesense_control }, 965 { .page = 0x1c, .subpage = 0x00, .emulate = spc_modesense_informational_exceptions }, 966 }; 967 968 static void spc_modesense_write_protect(unsigned char *buf, int type) 969 { 970 /* 971 * I believe that the WP bit (bit 7) in the mode header is the same for 972 * all device types.. 973 */ 974 switch (type) { 975 case TYPE_DISK: 976 case TYPE_TAPE: 977 default: 978 buf[0] |= 0x80; /* WP bit */ 979 break; 980 } 981 } 982 983 static void spc_modesense_dpofua(unsigned char *buf, int type) 984 { 985 switch (type) { 986 case TYPE_DISK: 987 buf[0] |= 0x10; /* DPOFUA bit */ 988 break; 989 default: 990 break; 991 } 992 } 993 994 static int spc_modesense_blockdesc(unsigned char *buf, u64 blocks, u32 block_size) 995 { 996 *buf++ = 8; 997 put_unaligned_be32(min(blocks, 0xffffffffull), buf); 998 buf += 4; 999 put_unaligned_be32(block_size, buf); 1000 return 9; 1001 } 1002 1003 static int spc_modesense_long_blockdesc(unsigned char *buf, u64 blocks, u32 block_size) 1004 { 1005 if (blocks <= 0xffffffff) 1006 return spc_modesense_blockdesc(buf + 3, blocks, block_size) + 3; 1007 1008 *buf++ = 1; /* LONGLBA */ 1009 buf += 2; 1010 *buf++ = 16; 1011 put_unaligned_be64(blocks, buf); 1012 buf += 12; 1013 put_unaligned_be32(block_size, buf); 1014 1015 return 17; 1016 } 1017 1018 static sense_reason_t spc_emulate_modesense(struct se_cmd *cmd) 1019 { 1020 struct se_device *dev = cmd->se_dev; 1021 char *cdb = cmd->t_task_cdb; 1022 unsigned char buf[SE_MODE_PAGE_BUF], *rbuf; 1023 int type = dev->transport->get_device_type(dev); 1024 int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10); 1025 bool dbd = !!(cdb[1] & 0x08); 1026 bool llba = ten ? !!(cdb[1] & 0x10) : false; 1027 u8 pc = cdb[2] >> 6; 1028 u8 page = cdb[2] & 0x3f; 1029 u8 subpage = cdb[3]; 1030 int length = 0; 1031 int ret; 1032 int i; 1033 1034 memset(buf, 0, SE_MODE_PAGE_BUF); 1035 1036 /* 1037 * Skip over MODE DATA LENGTH + MEDIUM TYPE fields to byte 3 for 1038 * MODE_SENSE_10 and byte 2 for MODE_SENSE (6). 1039 */ 1040 length = ten ? 3 : 2; 1041 1042 /* DEVICE-SPECIFIC PARAMETER */ 1043 if (cmd->se_lun->lun_access_ro || target_lun_is_rdonly(cmd)) 1044 spc_modesense_write_protect(&buf[length], type); 1045 1046 /* 1047 * SBC only allows us to enable FUA and DPO together. Fortunately 1048 * DPO is explicitly specified as a hint, so a noop is a perfectly 1049 * valid implementation. 1050 */ 1051 if (target_check_fua(dev)) 1052 spc_modesense_dpofua(&buf[length], type); 1053 1054 ++length; 1055 1056 /* BLOCK DESCRIPTOR */ 1057 1058 /* 1059 * For now we only include a block descriptor for disk (SBC) 1060 * devices; other command sets use a slightly different format. 1061 */ 1062 if (!dbd && type == TYPE_DISK) { 1063 u64 blocks = dev->transport->get_blocks(dev); 1064 u32 block_size = dev->dev_attrib.block_size; 1065 1066 if (ten) { 1067 if (llba) { 1068 length += spc_modesense_long_blockdesc(&buf[length], 1069 blocks, block_size); 1070 } else { 1071 length += 3; 1072 length += spc_modesense_blockdesc(&buf[length], 1073 blocks, block_size); 1074 } 1075 } else { 1076 length += spc_modesense_blockdesc(&buf[length], blocks, 1077 block_size); 1078 } 1079 } else { 1080 if (ten) 1081 length += 4; 1082 else 1083 length += 1; 1084 } 1085 1086 if (page == 0x3f) { 1087 if (subpage != 0x00 && subpage != 0xff) { 1088 pr_warn("MODE_SENSE: Invalid subpage code: 0x%02x\n", subpage); 1089 return TCM_INVALID_CDB_FIELD; 1090 } 1091 1092 for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) { 1093 /* 1094 * Tricky way to say all subpage 00h for 1095 * subpage==0, all subpages for subpage==0xff 1096 * (and we just checked above that those are 1097 * the only two possibilities). 1098 */ 1099 if ((modesense_handlers[i].subpage & ~subpage) == 0) { 1100 ret = modesense_handlers[i].emulate(cmd, pc, &buf[length]); 1101 if (!ten && length + ret >= 255) 1102 break; 1103 length += ret; 1104 } 1105 } 1106 1107 goto set_length; 1108 } 1109 1110 for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) 1111 if (modesense_handlers[i].page == page && 1112 modesense_handlers[i].subpage == subpage) { 1113 length += modesense_handlers[i].emulate(cmd, pc, &buf[length]); 1114 goto set_length; 1115 } 1116 1117 /* 1118 * We don't intend to implement: 1119 * - obsolete page 03h "format parameters" (checked by Solaris) 1120 */ 1121 if (page != 0x03) 1122 pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", 1123 page, subpage); 1124 1125 return TCM_UNKNOWN_MODE_PAGE; 1126 1127 set_length: 1128 if (ten) 1129 put_unaligned_be16(length - 2, buf); 1130 else 1131 buf[0] = length - 1; 1132 1133 rbuf = transport_kmap_data_sg(cmd); 1134 if (rbuf) { 1135 memcpy(rbuf, buf, min_t(u32, SE_MODE_PAGE_BUF, cmd->data_length)); 1136 transport_kunmap_data_sg(cmd); 1137 } 1138 1139 target_complete_cmd_with_length(cmd, SAM_STAT_GOOD, length); 1140 return 0; 1141 } 1142 1143 static sense_reason_t spc_emulate_modeselect(struct se_cmd *cmd) 1144 { 1145 char *cdb = cmd->t_task_cdb; 1146 bool ten = cdb[0] == MODE_SELECT_10; 1147 int off = ten ? 8 : 4; 1148 bool pf = !!(cdb[1] & 0x10); 1149 u8 page, subpage; 1150 unsigned char *buf; 1151 unsigned char tbuf[SE_MODE_PAGE_BUF]; 1152 int length; 1153 sense_reason_t ret = 0; 1154 int i; 1155 1156 if (!cmd->data_length) { 1157 target_complete_cmd(cmd, SAM_STAT_GOOD); 1158 return 0; 1159 } 1160 1161 if (cmd->data_length < off + 2) 1162 return TCM_PARAMETER_LIST_LENGTH_ERROR; 1163 1164 buf = transport_kmap_data_sg(cmd); 1165 if (!buf) 1166 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 1167 1168 if (!pf) { 1169 ret = TCM_INVALID_CDB_FIELD; 1170 goto out; 1171 } 1172 1173 page = buf[off] & 0x3f; 1174 subpage = buf[off] & 0x40 ? buf[off + 1] : 0; 1175 1176 for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) 1177 if (modesense_handlers[i].page == page && 1178 modesense_handlers[i].subpage == subpage) { 1179 memset(tbuf, 0, SE_MODE_PAGE_BUF); 1180 length = modesense_handlers[i].emulate(cmd, 0, tbuf); 1181 goto check_contents; 1182 } 1183 1184 ret = TCM_UNKNOWN_MODE_PAGE; 1185 goto out; 1186 1187 check_contents: 1188 if (cmd->data_length < off + length) { 1189 ret = TCM_PARAMETER_LIST_LENGTH_ERROR; 1190 goto out; 1191 } 1192 1193 if (memcmp(buf + off, tbuf, length)) 1194 ret = TCM_INVALID_PARAMETER_LIST; 1195 1196 out: 1197 transport_kunmap_data_sg(cmd); 1198 1199 if (!ret) 1200 target_complete_cmd(cmd, SAM_STAT_GOOD); 1201 return ret; 1202 } 1203 1204 static sense_reason_t spc_emulate_request_sense(struct se_cmd *cmd) 1205 { 1206 unsigned char *cdb = cmd->t_task_cdb; 1207 unsigned char *rbuf; 1208 u8 ua_asc = 0, ua_ascq = 0; 1209 unsigned char buf[SE_SENSE_BUF]; 1210 bool desc_format = target_sense_desc_format(cmd->se_dev); 1211 1212 memset(buf, 0, SE_SENSE_BUF); 1213 1214 if (cdb[1] & 0x01) { 1215 pr_err("REQUEST_SENSE description emulation not" 1216 " supported\n"); 1217 return TCM_INVALID_CDB_FIELD; 1218 } 1219 1220 rbuf = transport_kmap_data_sg(cmd); 1221 if (!rbuf) 1222 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 1223 1224 if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) 1225 scsi_build_sense_buffer(desc_format, buf, UNIT_ATTENTION, 1226 ua_asc, ua_ascq); 1227 else 1228 scsi_build_sense_buffer(desc_format, buf, NO_SENSE, 0x0, 0x0); 1229 1230 memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); 1231 transport_kunmap_data_sg(cmd); 1232 1233 target_complete_cmd(cmd, SAM_STAT_GOOD); 1234 return 0; 1235 } 1236 1237 sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd) 1238 { 1239 struct se_dev_entry *deve; 1240 struct se_session *sess = cmd->se_sess; 1241 struct se_node_acl *nacl; 1242 struct scsi_lun slun; 1243 unsigned char *buf; 1244 u32 lun_count = 0, offset = 8; 1245 __be32 len; 1246 1247 buf = transport_kmap_data_sg(cmd); 1248 if (cmd->data_length && !buf) 1249 return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 1250 1251 /* 1252 * If no struct se_session pointer is present, this struct se_cmd is 1253 * coming via a target_core_mod PASSTHROUGH op, and not through 1254 * a $FABRIC_MOD. In that case, report LUN=0 only. 1255 */ 1256 if (!sess) 1257 goto done; 1258 1259 nacl = sess->se_node_acl; 1260 1261 rcu_read_lock(); 1262 hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { 1263 /* 1264 * We determine the correct LUN LIST LENGTH even once we 1265 * have reached the initial allocation length. 1266 * See SPC2-R20 7.19. 1267 */ 1268 lun_count++; 1269 if (offset >= cmd->data_length) 1270 continue; 1271 1272 int_to_scsilun(deve->mapped_lun, &slun); 1273 memcpy(buf + offset, &slun, 1274 min(8u, cmd->data_length - offset)); 1275 offset += 8; 1276 } 1277 rcu_read_unlock(); 1278 1279 /* 1280 * See SPC3 r07, page 159. 1281 */ 1282 done: 1283 /* 1284 * If no LUNs are accessible, report virtual LUN 0. 1285 */ 1286 if (lun_count == 0) { 1287 int_to_scsilun(0, &slun); 1288 if (cmd->data_length > 8) 1289 memcpy(buf + offset, &slun, 1290 min(8u, cmd->data_length - offset)); 1291 lun_count = 1; 1292 } 1293 1294 if (buf) { 1295 len = cpu_to_be32(lun_count * 8); 1296 memcpy(buf, &len, min_t(int, sizeof len, cmd->data_length)); 1297 transport_kunmap_data_sg(cmd); 1298 } 1299 1300 target_complete_cmd_with_length(cmd, SAM_STAT_GOOD, 8 + lun_count * 8); 1301 return 0; 1302 } 1303 EXPORT_SYMBOL(spc_emulate_report_luns); 1304 1305 static sense_reason_t 1306 spc_emulate_testunitready(struct se_cmd *cmd) 1307 { 1308 target_complete_cmd(cmd, SAM_STAT_GOOD); 1309 return 0; 1310 } 1311 1312 static void set_dpofua_usage_bits(u8 *usage_bits, struct se_device *dev) 1313 { 1314 if (!target_check_fua(dev)) 1315 usage_bits[1] &= ~0x18; 1316 else 1317 usage_bits[1] |= 0x18; 1318 } 1319 1320 static void set_dpofua_usage_bits32(u8 *usage_bits, struct se_device *dev) 1321 { 1322 if (!target_check_fua(dev)) 1323 usage_bits[10] &= ~0x18; 1324 else 1325 usage_bits[10] |= 0x18; 1326 } 1327 1328 static struct target_opcode_descriptor tcm_opcode_read6 = { 1329 .support = SCSI_SUPPORT_FULL, 1330 .opcode = READ_6, 1331 .cdb_size = 6, 1332 .usage_bits = {READ_6, 0x1f, 0xff, 0xff, 1333 0xff, SCSI_CONTROL_MASK}, 1334 }; 1335 1336 static struct target_opcode_descriptor tcm_opcode_read10 = { 1337 .support = SCSI_SUPPORT_FULL, 1338 .opcode = READ_10, 1339 .cdb_size = 10, 1340 .usage_bits = {READ_10, 0xf8, 0xff, 0xff, 1341 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1342 0xff, SCSI_CONTROL_MASK}, 1343 .update_usage_bits = set_dpofua_usage_bits, 1344 }; 1345 1346 static struct target_opcode_descriptor tcm_opcode_read12 = { 1347 .support = SCSI_SUPPORT_FULL, 1348 .opcode = READ_12, 1349 .cdb_size = 12, 1350 .usage_bits = {READ_12, 0xf8, 0xff, 0xff, 1351 0xff, 0xff, 0xff, 0xff, 1352 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1353 .update_usage_bits = set_dpofua_usage_bits, 1354 }; 1355 1356 static struct target_opcode_descriptor tcm_opcode_read16 = { 1357 .support = SCSI_SUPPORT_FULL, 1358 .opcode = READ_16, 1359 .cdb_size = 16, 1360 .usage_bits = {READ_16, 0xf8, 0xff, 0xff, 1361 0xff, 0xff, 0xff, 0xff, 1362 0xff, 0xff, 0xff, 0xff, 1363 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1364 .update_usage_bits = set_dpofua_usage_bits, 1365 }; 1366 1367 static struct target_opcode_descriptor tcm_opcode_write6 = { 1368 .support = SCSI_SUPPORT_FULL, 1369 .opcode = WRITE_6, 1370 .cdb_size = 6, 1371 .usage_bits = {WRITE_6, 0x1f, 0xff, 0xff, 1372 0xff, SCSI_CONTROL_MASK}, 1373 }; 1374 1375 static struct target_opcode_descriptor tcm_opcode_write10 = { 1376 .support = SCSI_SUPPORT_FULL, 1377 .opcode = WRITE_10, 1378 .cdb_size = 10, 1379 .usage_bits = {WRITE_10, 0xf8, 0xff, 0xff, 1380 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1381 0xff, SCSI_CONTROL_MASK}, 1382 .update_usage_bits = set_dpofua_usage_bits, 1383 }; 1384 1385 static struct target_opcode_descriptor tcm_opcode_write_verify10 = { 1386 .support = SCSI_SUPPORT_FULL, 1387 .opcode = WRITE_VERIFY, 1388 .cdb_size = 10, 1389 .usage_bits = {WRITE_VERIFY, 0xf0, 0xff, 0xff, 1390 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1391 0xff, SCSI_CONTROL_MASK}, 1392 .update_usage_bits = set_dpofua_usage_bits, 1393 }; 1394 1395 static struct target_opcode_descriptor tcm_opcode_write12 = { 1396 .support = SCSI_SUPPORT_FULL, 1397 .opcode = WRITE_12, 1398 .cdb_size = 12, 1399 .usage_bits = {WRITE_12, 0xf8, 0xff, 0xff, 1400 0xff, 0xff, 0xff, 0xff, 1401 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1402 .update_usage_bits = set_dpofua_usage_bits, 1403 }; 1404 1405 static struct target_opcode_descriptor tcm_opcode_write16 = { 1406 .support = SCSI_SUPPORT_FULL, 1407 .opcode = WRITE_16, 1408 .cdb_size = 16, 1409 .usage_bits = {WRITE_16, 0xf8, 0xff, 0xff, 1410 0xff, 0xff, 0xff, 0xff, 1411 0xff, 0xff, 0xff, 0xff, 1412 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1413 .update_usage_bits = set_dpofua_usage_bits, 1414 }; 1415 1416 static struct target_opcode_descriptor tcm_opcode_write_verify16 = { 1417 .support = SCSI_SUPPORT_FULL, 1418 .opcode = WRITE_VERIFY_16, 1419 .cdb_size = 16, 1420 .usage_bits = {WRITE_VERIFY_16, 0xf0, 0xff, 0xff, 1421 0xff, 0xff, 0xff, 0xff, 1422 0xff, 0xff, 0xff, 0xff, 1423 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1424 .update_usage_bits = set_dpofua_usage_bits, 1425 }; 1426 1427 static bool tcm_is_ws_enabled(struct target_opcode_descriptor *descr, 1428 struct se_cmd *cmd) 1429 { 1430 struct exec_cmd_ops *ops = cmd->protocol_data; 1431 struct se_device *dev = cmd->se_dev; 1432 1433 return (dev->dev_attrib.emulate_tpws && !!ops->execute_unmap) || 1434 !!ops->execute_write_same; 1435 } 1436 1437 static struct target_opcode_descriptor tcm_opcode_write_same32 = { 1438 .support = SCSI_SUPPORT_FULL, 1439 .serv_action_valid = 1, 1440 .opcode = VARIABLE_LENGTH_CMD, 1441 .service_action = WRITE_SAME_32, 1442 .cdb_size = 32, 1443 .usage_bits = {VARIABLE_LENGTH_CMD, SCSI_CONTROL_MASK, 0x00, 0x00, 1444 0x00, 0x00, SCSI_GROUP_NUMBER_MASK, 0x18, 1445 0x00, WRITE_SAME_32, 0xe8, 0x00, 1446 0xff, 0xff, 0xff, 0xff, 1447 0xff, 0xff, 0xff, 0xff, 1448 0x00, 0x00, 0x00, 0x00, 1449 0x00, 0x00, 0x00, 0x00, 1450 0xff, 0xff, 0xff, 0xff}, 1451 .enabled = tcm_is_ws_enabled, 1452 .update_usage_bits = set_dpofua_usage_bits32, 1453 }; 1454 1455 static bool tcm_is_caw_enabled(struct target_opcode_descriptor *descr, 1456 struct se_cmd *cmd) 1457 { 1458 struct se_device *dev = cmd->se_dev; 1459 1460 return dev->dev_attrib.emulate_caw; 1461 } 1462 1463 static struct target_opcode_descriptor tcm_opcode_compare_write = { 1464 .support = SCSI_SUPPORT_FULL, 1465 .opcode = COMPARE_AND_WRITE, 1466 .cdb_size = 16, 1467 .usage_bits = {COMPARE_AND_WRITE, 0x18, 0xff, 0xff, 1468 0xff, 0xff, 0xff, 0xff, 1469 0xff, 0xff, 0x00, 0x00, 1470 0x00, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1471 .enabled = tcm_is_caw_enabled, 1472 .update_usage_bits = set_dpofua_usage_bits, 1473 }; 1474 1475 static struct target_opcode_descriptor tcm_opcode_read_capacity = { 1476 .support = SCSI_SUPPORT_FULL, 1477 .opcode = READ_CAPACITY, 1478 .cdb_size = 10, 1479 .usage_bits = {READ_CAPACITY, 0x00, 0xff, 0xff, 1480 0xff, 0xff, 0x00, 0x00, 1481 0x01, SCSI_CONTROL_MASK}, 1482 }; 1483 1484 static struct target_opcode_descriptor tcm_opcode_read_capacity16 = { 1485 .support = SCSI_SUPPORT_FULL, 1486 .serv_action_valid = 1, 1487 .opcode = SERVICE_ACTION_IN_16, 1488 .service_action = SAI_READ_CAPACITY_16, 1489 .cdb_size = 16, 1490 .usage_bits = {SERVICE_ACTION_IN_16, SAI_READ_CAPACITY_16, 0x00, 0x00, 1491 0x00, 0x00, 0x00, 0x00, 1492 0x00, 0x00, 0xff, 0xff, 1493 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1494 }; 1495 1496 static bool tcm_is_rep_ref_enabled(struct target_opcode_descriptor *descr, 1497 struct se_cmd *cmd) 1498 { 1499 struct se_device *dev = cmd->se_dev; 1500 1501 spin_lock(&dev->t10_alua.lba_map_lock); 1502 if (list_empty(&dev->t10_alua.lba_map_list)) { 1503 spin_unlock(&dev->t10_alua.lba_map_lock); 1504 return false; 1505 } 1506 spin_unlock(&dev->t10_alua.lba_map_lock); 1507 return true; 1508 } 1509 1510 static struct target_opcode_descriptor tcm_opcode_read_report_refferals = { 1511 .support = SCSI_SUPPORT_FULL, 1512 .serv_action_valid = 1, 1513 .opcode = SERVICE_ACTION_IN_16, 1514 .service_action = SAI_REPORT_REFERRALS, 1515 .cdb_size = 16, 1516 .usage_bits = {SERVICE_ACTION_IN_16, SAI_REPORT_REFERRALS, 0x00, 0x00, 1517 0x00, 0x00, 0x00, 0x00, 1518 0x00, 0x00, 0xff, 0xff, 1519 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1520 .enabled = tcm_is_rep_ref_enabled, 1521 }; 1522 1523 static struct target_opcode_descriptor tcm_opcode_sync_cache = { 1524 .support = SCSI_SUPPORT_FULL, 1525 .opcode = SYNCHRONIZE_CACHE, 1526 .cdb_size = 10, 1527 .usage_bits = {SYNCHRONIZE_CACHE, 0x02, 0xff, 0xff, 1528 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1529 0xff, SCSI_CONTROL_MASK}, 1530 }; 1531 1532 static struct target_opcode_descriptor tcm_opcode_sync_cache16 = { 1533 .support = SCSI_SUPPORT_FULL, 1534 .opcode = SYNCHRONIZE_CACHE_16, 1535 .cdb_size = 16, 1536 .usage_bits = {SYNCHRONIZE_CACHE_16, 0x02, 0xff, 0xff, 1537 0xff, 0xff, 0xff, 0xff, 1538 0xff, 0xff, 0xff, 0xff, 1539 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1540 }; 1541 1542 static bool tcm_is_unmap_enabled(struct target_opcode_descriptor *descr, 1543 struct se_cmd *cmd) 1544 { 1545 struct exec_cmd_ops *ops = cmd->protocol_data; 1546 struct se_device *dev = cmd->se_dev; 1547 1548 return ops->execute_unmap && dev->dev_attrib.emulate_tpu; 1549 } 1550 1551 static struct target_opcode_descriptor tcm_opcode_unmap = { 1552 .support = SCSI_SUPPORT_FULL, 1553 .opcode = UNMAP, 1554 .cdb_size = 10, 1555 .usage_bits = {UNMAP, 0x00, 0x00, 0x00, 1556 0x00, 0x00, SCSI_GROUP_NUMBER_MASK, 0xff, 1557 0xff, SCSI_CONTROL_MASK}, 1558 .enabled = tcm_is_unmap_enabled, 1559 }; 1560 1561 static struct target_opcode_descriptor tcm_opcode_write_same = { 1562 .support = SCSI_SUPPORT_FULL, 1563 .opcode = WRITE_SAME, 1564 .cdb_size = 10, 1565 .usage_bits = {WRITE_SAME, 0xe8, 0xff, 0xff, 1566 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1567 0xff, SCSI_CONTROL_MASK}, 1568 .enabled = tcm_is_ws_enabled, 1569 }; 1570 1571 static struct target_opcode_descriptor tcm_opcode_write_same16 = { 1572 .support = SCSI_SUPPORT_FULL, 1573 .opcode = WRITE_SAME_16, 1574 .cdb_size = 16, 1575 .usage_bits = {WRITE_SAME_16, 0xe8, 0xff, 0xff, 1576 0xff, 0xff, 0xff, 0xff, 1577 0xff, 0xff, 0xff, 0xff, 1578 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1579 .enabled = tcm_is_ws_enabled, 1580 }; 1581 1582 static struct target_opcode_descriptor tcm_opcode_verify = { 1583 .support = SCSI_SUPPORT_FULL, 1584 .opcode = VERIFY, 1585 .cdb_size = 10, 1586 .usage_bits = {VERIFY, 0x00, 0xff, 0xff, 1587 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff, 1588 0xff, SCSI_CONTROL_MASK}, 1589 }; 1590 1591 static struct target_opcode_descriptor tcm_opcode_verify16 = { 1592 .support = SCSI_SUPPORT_FULL, 1593 .opcode = VERIFY_16, 1594 .cdb_size = 16, 1595 .usage_bits = {VERIFY_16, 0x00, 0xff, 0xff, 1596 0xff, 0xff, 0xff, 0xff, 1597 0xff, 0xff, 0xff, 0xff, 1598 0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK}, 1599 }; 1600 1601 static struct target_opcode_descriptor tcm_opcode_start_stop = { 1602 .support = SCSI_SUPPORT_FULL, 1603 .opcode = START_STOP, 1604 .cdb_size = 6, 1605 .usage_bits = {START_STOP, 0x01, 0x00, 0x00, 1606 0x01, SCSI_CONTROL_MASK}, 1607 }; 1608 1609 static struct target_opcode_descriptor tcm_opcode_mode_select = { 1610 .support = SCSI_SUPPORT_FULL, 1611 .opcode = MODE_SELECT, 1612 .cdb_size = 6, 1613 .usage_bits = {MODE_SELECT, 0x10, 0x00, 0x00, 1614 0xff, SCSI_CONTROL_MASK}, 1615 }; 1616 1617 static struct target_opcode_descriptor tcm_opcode_mode_select10 = { 1618 .support = SCSI_SUPPORT_FULL, 1619 .opcode = MODE_SELECT_10, 1620 .cdb_size = 10, 1621 .usage_bits = {MODE_SELECT_10, 0x10, 0x00, 0x00, 1622 0x00, 0x00, 0x00, 0xff, 1623 0xff, SCSI_CONTROL_MASK}, 1624 }; 1625 1626 static struct target_opcode_descriptor tcm_opcode_mode_sense = { 1627 .support = SCSI_SUPPORT_FULL, 1628 .opcode = MODE_SENSE, 1629 .cdb_size = 6, 1630 .usage_bits = {MODE_SENSE, 0x08, 0xff, 0xff, 1631 0xff, SCSI_CONTROL_MASK}, 1632 }; 1633 1634 static struct target_opcode_descriptor tcm_opcode_mode_sense10 = { 1635 .support = SCSI_SUPPORT_FULL, 1636 .opcode = MODE_SENSE_10, 1637 .cdb_size = 10, 1638 .usage_bits = {MODE_SENSE_10, 0x18, 0xff, 0xff, 1639 0x00, 0x00, 0x00, 0xff, 1640 0xff, SCSI_CONTROL_MASK}, 1641 }; 1642 1643 static struct target_opcode_descriptor tcm_opcode_pri_read_keys = { 1644 .support = SCSI_SUPPORT_FULL, 1645 .serv_action_valid = 1, 1646 .opcode = PERSISTENT_RESERVE_IN, 1647 .service_action = PRI_READ_KEYS, 1648 .cdb_size = 10, 1649 .usage_bits = {PERSISTENT_RESERVE_IN, PRI_READ_KEYS, 0x00, 0x00, 1650 0x00, 0x00, 0x00, 0xff, 1651 0xff, SCSI_CONTROL_MASK}, 1652 }; 1653 1654 static struct target_opcode_descriptor tcm_opcode_pri_read_resrv = { 1655 .support = SCSI_SUPPORT_FULL, 1656 .serv_action_valid = 1, 1657 .opcode = PERSISTENT_RESERVE_IN, 1658 .service_action = PRI_READ_RESERVATION, 1659 .cdb_size = 10, 1660 .usage_bits = {PERSISTENT_RESERVE_IN, PRI_READ_RESERVATION, 0x00, 0x00, 1661 0x00, 0x00, 0x00, 0xff, 1662 0xff, SCSI_CONTROL_MASK}, 1663 }; 1664 1665 static bool tcm_is_pr_enabled(struct target_opcode_descriptor *descr, 1666 struct se_cmd *cmd) 1667 { 1668 struct se_device *dev = cmd->se_dev; 1669 1670 if (!dev->dev_attrib.emulate_pr) 1671 return false; 1672 1673 if (!(dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR)) 1674 return true; 1675 1676 switch (descr->opcode) { 1677 case RESERVE: 1678 case RESERVE_10: 1679 case RELEASE: 1680 case RELEASE_10: 1681 /* 1682 * The pr_ops which are used by the backend modules don't 1683 * support these commands. 1684 */ 1685 return false; 1686 case PERSISTENT_RESERVE_OUT: 1687 switch (descr->service_action) { 1688 case PRO_REGISTER_AND_MOVE: 1689 case PRO_REPLACE_LOST_RESERVATION: 1690 /* 1691 * The backend modules don't have access to ports and 1692 * I_T nexuses so they can't handle these type of 1693 * requests. 1694 */ 1695 return false; 1696 } 1697 break; 1698 case PERSISTENT_RESERVE_IN: 1699 if (descr->service_action == PRI_READ_FULL_STATUS) 1700 return false; 1701 break; 1702 } 1703 1704 return true; 1705 } 1706 1707 static struct target_opcode_descriptor tcm_opcode_pri_read_caps = { 1708 .support = SCSI_SUPPORT_FULL, 1709 .serv_action_valid = 1, 1710 .opcode = PERSISTENT_RESERVE_IN, 1711 .service_action = PRI_REPORT_CAPABILITIES, 1712 .cdb_size = 10, 1713 .usage_bits = {PERSISTENT_RESERVE_IN, PRI_REPORT_CAPABILITIES, 0x00, 0x00, 1714 0x00, 0x00, 0x00, 0xff, 1715 0xff, SCSI_CONTROL_MASK}, 1716 .enabled = tcm_is_pr_enabled, 1717 }; 1718 1719 static struct target_opcode_descriptor tcm_opcode_pri_read_full_status = { 1720 .support = SCSI_SUPPORT_FULL, 1721 .serv_action_valid = 1, 1722 .opcode = PERSISTENT_RESERVE_IN, 1723 .service_action = PRI_READ_FULL_STATUS, 1724 .cdb_size = 10, 1725 .usage_bits = {PERSISTENT_RESERVE_IN, PRI_READ_FULL_STATUS, 0x00, 0x00, 1726 0x00, 0x00, 0x00, 0xff, 1727 0xff, SCSI_CONTROL_MASK}, 1728 .enabled = tcm_is_pr_enabled, 1729 }; 1730 1731 static struct target_opcode_descriptor tcm_opcode_pro_register = { 1732 .support = SCSI_SUPPORT_FULL, 1733 .serv_action_valid = 1, 1734 .opcode = PERSISTENT_RESERVE_OUT, 1735 .service_action = PRO_REGISTER, 1736 .cdb_size = 10, 1737 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_REGISTER, 0xff, 0x00, 1738 0x00, 0xff, 0xff, 0xff, 1739 0xff, SCSI_CONTROL_MASK}, 1740 .enabled = tcm_is_pr_enabled, 1741 }; 1742 1743 static struct target_opcode_descriptor tcm_opcode_pro_reserve = { 1744 .support = SCSI_SUPPORT_FULL, 1745 .serv_action_valid = 1, 1746 .opcode = PERSISTENT_RESERVE_OUT, 1747 .service_action = PRO_RESERVE, 1748 .cdb_size = 10, 1749 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_RESERVE, 0xff, 0x00, 1750 0x00, 0xff, 0xff, 0xff, 1751 0xff, SCSI_CONTROL_MASK}, 1752 .enabled = tcm_is_pr_enabled, 1753 }; 1754 1755 static struct target_opcode_descriptor tcm_opcode_pro_release = { 1756 .support = SCSI_SUPPORT_FULL, 1757 .serv_action_valid = 1, 1758 .opcode = PERSISTENT_RESERVE_OUT, 1759 .service_action = PRO_RELEASE, 1760 .cdb_size = 10, 1761 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_RELEASE, 0xff, 0x00, 1762 0x00, 0xff, 0xff, 0xff, 1763 0xff, SCSI_CONTROL_MASK}, 1764 .enabled = tcm_is_pr_enabled, 1765 }; 1766 1767 static struct target_opcode_descriptor tcm_opcode_pro_clear = { 1768 .support = SCSI_SUPPORT_FULL, 1769 .serv_action_valid = 1, 1770 .opcode = PERSISTENT_RESERVE_OUT, 1771 .service_action = PRO_CLEAR, 1772 .cdb_size = 10, 1773 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_CLEAR, 0xff, 0x00, 1774 0x00, 0xff, 0xff, 0xff, 1775 0xff, SCSI_CONTROL_MASK}, 1776 .enabled = tcm_is_pr_enabled, 1777 }; 1778 1779 static struct target_opcode_descriptor tcm_opcode_pro_preempt = { 1780 .support = SCSI_SUPPORT_FULL, 1781 .serv_action_valid = 1, 1782 .opcode = PERSISTENT_RESERVE_OUT, 1783 .service_action = PRO_PREEMPT, 1784 .cdb_size = 10, 1785 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_PREEMPT, 0xff, 0x00, 1786 0x00, 0xff, 0xff, 0xff, 1787 0xff, SCSI_CONTROL_MASK}, 1788 .enabled = tcm_is_pr_enabled, 1789 }; 1790 1791 static struct target_opcode_descriptor tcm_opcode_pro_preempt_abort = { 1792 .support = SCSI_SUPPORT_FULL, 1793 .serv_action_valid = 1, 1794 .opcode = PERSISTENT_RESERVE_OUT, 1795 .service_action = PRO_PREEMPT_AND_ABORT, 1796 .cdb_size = 10, 1797 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_PREEMPT_AND_ABORT, 0xff, 0x00, 1798 0x00, 0xff, 0xff, 0xff, 1799 0xff, SCSI_CONTROL_MASK}, 1800 .enabled = tcm_is_pr_enabled, 1801 }; 1802 1803 static struct target_opcode_descriptor tcm_opcode_pro_reg_ign_exist = { 1804 .support = SCSI_SUPPORT_FULL, 1805 .serv_action_valid = 1, 1806 .opcode = PERSISTENT_RESERVE_OUT, 1807 .service_action = PRO_REGISTER_AND_IGNORE_EXISTING_KEY, 1808 .cdb_size = 10, 1809 .usage_bits = { 1810 PERSISTENT_RESERVE_OUT, PRO_REGISTER_AND_IGNORE_EXISTING_KEY, 1811 0xff, 0x00, 1812 0x00, 0xff, 0xff, 0xff, 1813 0xff, SCSI_CONTROL_MASK}, 1814 .enabled = tcm_is_pr_enabled, 1815 }; 1816 1817 static struct target_opcode_descriptor tcm_opcode_pro_register_move = { 1818 .support = SCSI_SUPPORT_FULL, 1819 .serv_action_valid = 1, 1820 .opcode = PERSISTENT_RESERVE_OUT, 1821 .service_action = PRO_REGISTER_AND_MOVE, 1822 .cdb_size = 10, 1823 .usage_bits = {PERSISTENT_RESERVE_OUT, PRO_REGISTER_AND_MOVE, 0xff, 0x00, 1824 0x00, 0xff, 0xff, 0xff, 1825 0xff, SCSI_CONTROL_MASK}, 1826 .enabled = tcm_is_pr_enabled, 1827 }; 1828 1829 static struct target_opcode_descriptor tcm_opcode_release = { 1830 .support = SCSI_SUPPORT_FULL, 1831 .opcode = RELEASE, 1832 .cdb_size = 6, 1833 .usage_bits = {RELEASE, 0x00, 0x00, 0x00, 1834 0x00, SCSI_CONTROL_MASK}, 1835 .enabled = tcm_is_pr_enabled, 1836 }; 1837 1838 static struct target_opcode_descriptor tcm_opcode_release10 = { 1839 .support = SCSI_SUPPORT_FULL, 1840 .opcode = RELEASE_10, 1841 .cdb_size = 10, 1842 .usage_bits = {RELEASE_10, 0x00, 0x00, 0x00, 1843 0x00, 0x00, 0x00, 0xff, 1844 0xff, SCSI_CONTROL_MASK}, 1845 .enabled = tcm_is_pr_enabled, 1846 }; 1847 1848 static struct target_opcode_descriptor tcm_opcode_reserve = { 1849 .support = SCSI_SUPPORT_FULL, 1850 .opcode = RESERVE, 1851 .cdb_size = 6, 1852 .usage_bits = {RESERVE, 0x00, 0x00, 0x00, 1853 0x00, SCSI_CONTROL_MASK}, 1854 .enabled = tcm_is_pr_enabled, 1855 }; 1856 1857 static struct target_opcode_descriptor tcm_opcode_reserve10 = { 1858 .support = SCSI_SUPPORT_FULL, 1859 .opcode = RESERVE_10, 1860 .cdb_size = 10, 1861 .usage_bits = {RESERVE_10, 0x00, 0x00, 0x00, 1862 0x00, 0x00, 0x00, 0xff, 1863 0xff, SCSI_CONTROL_MASK}, 1864 .enabled = tcm_is_pr_enabled, 1865 }; 1866 1867 static struct target_opcode_descriptor tcm_opcode_request_sense = { 1868 .support = SCSI_SUPPORT_FULL, 1869 .opcode = REQUEST_SENSE, 1870 .cdb_size = 6, 1871 .usage_bits = {REQUEST_SENSE, 0x00, 0x00, 0x00, 1872 0xff, SCSI_CONTROL_MASK}, 1873 }; 1874 1875 static struct target_opcode_descriptor tcm_opcode_inquiry = { 1876 .support = SCSI_SUPPORT_FULL, 1877 .opcode = INQUIRY, 1878 .cdb_size = 6, 1879 .usage_bits = {INQUIRY, 0x01, 0xff, 0xff, 1880 0xff, SCSI_CONTROL_MASK}, 1881 }; 1882 1883 static bool tcm_is_3pc_enabled(struct target_opcode_descriptor *descr, 1884 struct se_cmd *cmd) 1885 { 1886 struct se_device *dev = cmd->se_dev; 1887 1888 return dev->dev_attrib.emulate_3pc; 1889 } 1890 1891 static struct target_opcode_descriptor tcm_opcode_extended_copy_lid1 = { 1892 .support = SCSI_SUPPORT_FULL, 1893 .serv_action_valid = 1, 1894 .opcode = EXTENDED_COPY, 1895 .cdb_size = 16, 1896 .usage_bits = {EXTENDED_COPY, 0x00, 0x00, 0x00, 1897 0x00, 0x00, 0x00, 0x00, 1898 0x00, 0x00, 0xff, 0xff, 1899 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1900 .enabled = tcm_is_3pc_enabled, 1901 }; 1902 1903 static struct target_opcode_descriptor tcm_opcode_rcv_copy_res_op_params = { 1904 .support = SCSI_SUPPORT_FULL, 1905 .serv_action_valid = 1, 1906 .opcode = RECEIVE_COPY_RESULTS, 1907 .service_action = RCR_SA_OPERATING_PARAMETERS, 1908 .cdb_size = 16, 1909 .usage_bits = {RECEIVE_COPY_RESULTS, RCR_SA_OPERATING_PARAMETERS, 1910 0x00, 0x00, 1911 0x00, 0x00, 0x00, 0x00, 1912 0x00, 0x00, 0xff, 0xff, 1913 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1914 .enabled = tcm_is_3pc_enabled, 1915 }; 1916 1917 static struct target_opcode_descriptor tcm_opcode_report_luns = { 1918 .support = SCSI_SUPPORT_FULL, 1919 .opcode = REPORT_LUNS, 1920 .cdb_size = 12, 1921 .usage_bits = {REPORT_LUNS, 0x00, 0xff, 0x00, 1922 0x00, 0x00, 0xff, 0xff, 1923 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1924 }; 1925 1926 static struct target_opcode_descriptor tcm_opcode_test_unit_ready = { 1927 .support = SCSI_SUPPORT_FULL, 1928 .opcode = TEST_UNIT_READY, 1929 .cdb_size = 6, 1930 .usage_bits = {TEST_UNIT_READY, 0x00, 0x00, 0x00, 1931 0x00, SCSI_CONTROL_MASK}, 1932 }; 1933 1934 static struct target_opcode_descriptor tcm_opcode_report_target_pgs = { 1935 .support = SCSI_SUPPORT_FULL, 1936 .serv_action_valid = 1, 1937 .opcode = MAINTENANCE_IN, 1938 .service_action = MI_REPORT_TARGET_PGS, 1939 .cdb_size = 12, 1940 .usage_bits = {MAINTENANCE_IN, 0xE0 | MI_REPORT_TARGET_PGS, 0x00, 0x00, 1941 0x00, 0x00, 0xff, 0xff, 1942 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1943 }; 1944 1945 static bool spc_rsoc_enabled(struct target_opcode_descriptor *descr, 1946 struct se_cmd *cmd) 1947 { 1948 struct se_device *dev = cmd->se_dev; 1949 1950 return dev->dev_attrib.emulate_rsoc; 1951 } 1952 1953 static struct target_opcode_descriptor tcm_opcode_report_supp_opcodes = { 1954 .support = SCSI_SUPPORT_FULL, 1955 .serv_action_valid = 1, 1956 .opcode = MAINTENANCE_IN, 1957 .service_action = MI_REPORT_SUPPORTED_OPERATION_CODES, 1958 .cdb_size = 12, 1959 .usage_bits = {MAINTENANCE_IN, MI_REPORT_SUPPORTED_OPERATION_CODES, 1960 0x87, 0xff, 1961 0xff, 0xff, 0xff, 0xff, 1962 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1963 .enabled = spc_rsoc_enabled, 1964 }; 1965 1966 static bool tcm_is_set_tpg_enabled(struct target_opcode_descriptor *descr, 1967 struct se_cmd *cmd) 1968 { 1969 struct t10_alua_tg_pt_gp *l_tg_pt_gp; 1970 struct se_lun *l_lun = cmd->se_lun; 1971 1972 rcu_read_lock(); 1973 l_tg_pt_gp = rcu_dereference(l_lun->lun_tg_pt_gp); 1974 if (!l_tg_pt_gp) { 1975 rcu_read_unlock(); 1976 return false; 1977 } 1978 if (!(l_tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICIT_ALUA)) { 1979 rcu_read_unlock(); 1980 return false; 1981 } 1982 rcu_read_unlock(); 1983 1984 return true; 1985 } 1986 1987 static struct target_opcode_descriptor tcm_opcode_set_tpg = { 1988 .support = SCSI_SUPPORT_FULL, 1989 .serv_action_valid = 1, 1990 .opcode = MAINTENANCE_OUT, 1991 .service_action = MO_SET_TARGET_PGS, 1992 .cdb_size = 12, 1993 .usage_bits = {MAINTENANCE_OUT, MO_SET_TARGET_PGS, 0x00, 0x00, 1994 0x00, 0x00, 0xff, 0xff, 1995 0xff, 0xff, 0x00, SCSI_CONTROL_MASK}, 1996 .enabled = tcm_is_set_tpg_enabled, 1997 }; 1998 1999 static struct target_opcode_descriptor *tcm_supported_opcodes[] = { 2000 &tcm_opcode_read6, 2001 &tcm_opcode_read10, 2002 &tcm_opcode_read12, 2003 &tcm_opcode_read16, 2004 &tcm_opcode_write6, 2005 &tcm_opcode_write10, 2006 &tcm_opcode_write_verify10, 2007 &tcm_opcode_write12, 2008 &tcm_opcode_write16, 2009 &tcm_opcode_write_verify16, 2010 &tcm_opcode_write_same32, 2011 &tcm_opcode_compare_write, 2012 &tcm_opcode_read_capacity, 2013 &tcm_opcode_read_capacity16, 2014 &tcm_opcode_read_report_refferals, 2015 &tcm_opcode_sync_cache, 2016 &tcm_opcode_sync_cache16, 2017 &tcm_opcode_unmap, 2018 &tcm_opcode_write_same, 2019 &tcm_opcode_write_same16, 2020 &tcm_opcode_verify, 2021 &tcm_opcode_verify16, 2022 &tcm_opcode_start_stop, 2023 &tcm_opcode_mode_select, 2024 &tcm_opcode_mode_select10, 2025 &tcm_opcode_mode_sense, 2026 &tcm_opcode_mode_sense10, 2027 &tcm_opcode_pri_read_keys, 2028 &tcm_opcode_pri_read_resrv, 2029 &tcm_opcode_pri_read_caps, 2030 &tcm_opcode_pri_read_full_status, 2031 &tcm_opcode_pro_register, 2032 &tcm_opcode_pro_reserve, 2033 &tcm_opcode_pro_release, 2034 &tcm_opcode_pro_clear, 2035 &tcm_opcode_pro_preempt, 2036 &tcm_opcode_pro_preempt_abort, 2037 &tcm_opcode_pro_reg_ign_exist, 2038 &tcm_opcode_pro_register_move, 2039 &tcm_opcode_release, 2040 &tcm_opcode_release10, 2041 &tcm_opcode_reserve, 2042 &tcm_opcode_reserve10, 2043 &tcm_opcode_request_sense, 2044 &tcm_opcode_inquiry, 2045 &tcm_opcode_extended_copy_lid1, 2046 &tcm_opcode_rcv_copy_res_op_params, 2047 &tcm_opcode_report_luns, 2048 &tcm_opcode_test_unit_ready, 2049 &tcm_opcode_report_target_pgs, 2050 &tcm_opcode_report_supp_opcodes, 2051 &tcm_opcode_set_tpg, 2052 }; 2053 2054 static int 2055 spc_rsoc_encode_command_timeouts_descriptor(unsigned char *buf, u8 ctdp, 2056 struct target_opcode_descriptor *descr) 2057 { 2058 if (!ctdp) 2059 return 0; 2060 2061 put_unaligned_be16(0xa, buf); 2062 buf[3] = descr->specific_timeout; 2063 put_unaligned_be32(descr->nominal_timeout, &buf[4]); 2064 put_unaligned_be32(descr->recommended_timeout, &buf[8]); 2065 2066 return 12; 2067 } 2068 2069 static int 2070 spc_rsoc_encode_command_descriptor(unsigned char *buf, u8 ctdp, 2071 struct target_opcode_descriptor *descr) 2072 { 2073 int td_size = 0; 2074 2075 buf[0] = descr->opcode; 2076 2077 put_unaligned_be16(descr->service_action, &buf[2]); 2078 2079 buf[5] = (ctdp << 1) | descr->serv_action_valid; 2080 put_unaligned_be16(descr->cdb_size, &buf[6]); 2081 2082 td_size = spc_rsoc_encode_command_timeouts_descriptor(&buf[8], ctdp, 2083 descr); 2084 2085 return 8 + td_size; 2086 } 2087 2088 static int 2089 spc_rsoc_encode_one_command_descriptor(unsigned char *buf, u8 ctdp, 2090 struct target_opcode_descriptor *descr, 2091 struct se_device *dev) 2092 { 2093 int td_size = 0; 2094 2095 if (!descr) { 2096 buf[1] = (ctdp << 7) | SCSI_SUPPORT_NOT_SUPPORTED; 2097 return 2; 2098 } 2099 2100 buf[1] = (ctdp << 7) | SCSI_SUPPORT_FULL; 2101 put_unaligned_be16(descr->cdb_size, &buf[2]); 2102 memcpy(&buf[4], descr->usage_bits, descr->cdb_size); 2103 if (descr->update_usage_bits) 2104 descr->update_usage_bits(&buf[4], dev); 2105 2106 td_size = spc_rsoc_encode_command_timeouts_descriptor( 2107 &buf[4 + descr->cdb_size], ctdp, descr); 2108 2109 return 4 + descr->cdb_size + td_size; 2110 } 2111 2112 static sense_reason_t 2113 spc_rsoc_get_descr(struct se_cmd *cmd, struct target_opcode_descriptor **opcode) 2114 { 2115 struct target_opcode_descriptor *descr; 2116 struct se_session *sess = cmd->se_sess; 2117 unsigned char *cdb = cmd->t_task_cdb; 2118 u8 opts = cdb[2] & 0x3; 2119 u8 requested_opcode; 2120 u16 requested_sa; 2121 int i; 2122 2123 requested_opcode = cdb[3]; 2124 requested_sa = ((u16)cdb[4]) << 8 | cdb[5]; 2125 *opcode = NULL; 2126 2127 if (opts > 3) { 2128 pr_debug("TARGET_CORE[%s]: Invalid REPORT SUPPORTED OPERATION CODES" 2129 " with unsupported REPORTING OPTIONS %#x for 0x%08llx from %s\n", 2130 cmd->se_tfo->fabric_name, opts, 2131 cmd->se_lun->unpacked_lun, 2132 sess->se_node_acl->initiatorname); 2133 return TCM_INVALID_CDB_FIELD; 2134 } 2135 2136 for (i = 0; i < ARRAY_SIZE(tcm_supported_opcodes); i++) { 2137 descr = tcm_supported_opcodes[i]; 2138 if (descr->opcode != requested_opcode) 2139 continue; 2140 2141 switch (opts) { 2142 case 0x1: 2143 /* 2144 * If the REQUESTED OPERATION CODE field specifies an 2145 * operation code for which the device server implements 2146 * service actions, then the device server shall 2147 * terminate the command with CHECK CONDITION status, 2148 * with the sense key set to ILLEGAL REQUEST, and the 2149 * additional sense code set to INVALID FIELD IN CDB 2150 */ 2151 if (descr->serv_action_valid) 2152 return TCM_INVALID_CDB_FIELD; 2153 2154 if (!descr->enabled || descr->enabled(descr, cmd)) 2155 *opcode = descr; 2156 break; 2157 case 0x2: 2158 /* 2159 * If the REQUESTED OPERATION CODE field specifies an 2160 * operation code for which the device server does not 2161 * implement service actions, then the device server 2162 * shall terminate the command with CHECK CONDITION 2163 * status, with the sense key set to ILLEGAL REQUEST, 2164 * and the additional sense code set to INVALID FIELD IN CDB. 2165 */ 2166 if (descr->serv_action_valid && 2167 descr->service_action == requested_sa) { 2168 if (!descr->enabled || descr->enabled(descr, 2169 cmd)) 2170 *opcode = descr; 2171 } else if (!descr->serv_action_valid) 2172 return TCM_INVALID_CDB_FIELD; 2173 break; 2174 case 0x3: 2175 /* 2176 * The command support data for the operation code and 2177 * service action a specified in the REQUESTED OPERATION 2178 * CODE field and REQUESTED SERVICE ACTION field shall 2179 * be returned in the one_command parameter data format. 2180 */ 2181 if (descr->service_action == requested_sa) 2182 if (!descr->enabled || descr->enabled(descr, 2183 cmd)) 2184 *opcode = descr; 2185 break; 2186 } 2187 } 2188 2189 return 0; 2190 } 2191 2192 static sense_reason_t 2193 spc_emulate_report_supp_op_codes(struct se_cmd *cmd) 2194 { 2195 int descr_num = ARRAY_SIZE(tcm_supported_opcodes); 2196 struct target_opcode_descriptor *descr = NULL; 2197 unsigned char *cdb = cmd->t_task_cdb; 2198 u8 rctd = (cdb[2] >> 7) & 0x1; 2199 unsigned char *buf = NULL; 2200 int response_length = 0; 2201 u8 opts = cdb[2] & 0x3; 2202 unsigned char *rbuf; 2203 sense_reason_t ret = 0; 2204 int i; 2205 2206 if (!cmd->se_dev->dev_attrib.emulate_rsoc) 2207 return TCM_UNSUPPORTED_SCSI_OPCODE; 2208 2209 rbuf = transport_kmap_data_sg(cmd); 2210 if (cmd->data_length && !rbuf) { 2211 ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 2212 goto out; 2213 } 2214 2215 if (opts == 0) 2216 response_length = 4 + (8 + rctd * 12) * descr_num; 2217 else { 2218 ret = spc_rsoc_get_descr(cmd, &descr); 2219 if (ret) 2220 goto out; 2221 2222 if (descr) 2223 response_length = 4 + descr->cdb_size + rctd * 12; 2224 else 2225 response_length = 2; 2226 } 2227 2228 buf = kzalloc(response_length, GFP_KERNEL); 2229 if (!buf) { 2230 ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; 2231 goto out; 2232 } 2233 response_length = 0; 2234 2235 if (opts == 0) { 2236 response_length += 4; 2237 2238 for (i = 0; i < ARRAY_SIZE(tcm_supported_opcodes); i++) { 2239 descr = tcm_supported_opcodes[i]; 2240 if (descr->enabled && !descr->enabled(descr, cmd)) 2241 continue; 2242 2243 response_length += spc_rsoc_encode_command_descriptor( 2244 &buf[response_length], rctd, descr); 2245 } 2246 put_unaligned_be32(response_length - 3, buf); 2247 } else { 2248 response_length = spc_rsoc_encode_one_command_descriptor( 2249 &buf[response_length], rctd, descr, 2250 cmd->se_dev); 2251 } 2252 2253 memcpy(rbuf, buf, min_t(u32, response_length, cmd->data_length)); 2254 out: 2255 kfree(buf); 2256 transport_kunmap_data_sg(cmd); 2257 2258 if (!ret) 2259 target_complete_cmd_with_length(cmd, SAM_STAT_GOOD, response_length); 2260 return ret; 2261 } 2262 2263 sense_reason_t 2264 spc_parse_cdb(struct se_cmd *cmd, unsigned int *size) 2265 { 2266 struct se_device *dev = cmd->se_dev; 2267 unsigned char *cdb = cmd->t_task_cdb; 2268 2269 switch (cdb[0]) { 2270 case RESERVE: 2271 case RESERVE_10: 2272 case RELEASE: 2273 case RELEASE_10: 2274 if (!dev->dev_attrib.emulate_pr) 2275 return TCM_UNSUPPORTED_SCSI_OPCODE; 2276 2277 if (dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR) 2278 return TCM_UNSUPPORTED_SCSI_OPCODE; 2279 break; 2280 case PERSISTENT_RESERVE_IN: 2281 case PERSISTENT_RESERVE_OUT: 2282 if (!dev->dev_attrib.emulate_pr) 2283 return TCM_UNSUPPORTED_SCSI_OPCODE; 2284 break; 2285 } 2286 2287 switch (cdb[0]) { 2288 case MODE_SELECT: 2289 *size = cdb[4]; 2290 cmd->execute_cmd = spc_emulate_modeselect; 2291 break; 2292 case MODE_SELECT_10: 2293 *size = get_unaligned_be16(&cdb[7]); 2294 cmd->execute_cmd = spc_emulate_modeselect; 2295 break; 2296 case MODE_SENSE: 2297 *size = cdb[4]; 2298 cmd->execute_cmd = spc_emulate_modesense; 2299 break; 2300 case MODE_SENSE_10: 2301 *size = get_unaligned_be16(&cdb[7]); 2302 cmd->execute_cmd = spc_emulate_modesense; 2303 break; 2304 case LOG_SELECT: 2305 case LOG_SENSE: 2306 *size = get_unaligned_be16(&cdb[7]); 2307 break; 2308 case PERSISTENT_RESERVE_IN: 2309 *size = get_unaligned_be16(&cdb[7]); 2310 cmd->execute_cmd = target_scsi3_emulate_pr_in; 2311 break; 2312 case PERSISTENT_RESERVE_OUT: 2313 *size = get_unaligned_be32(&cdb[5]); 2314 cmd->execute_cmd = target_scsi3_emulate_pr_out; 2315 break; 2316 case RELEASE: 2317 case RELEASE_10: 2318 if (cdb[0] == RELEASE_10) 2319 *size = get_unaligned_be16(&cdb[7]); 2320 else 2321 *size = cmd->data_length; 2322 2323 cmd->execute_cmd = target_scsi2_reservation_release; 2324 break; 2325 case RESERVE: 2326 case RESERVE_10: 2327 /* 2328 * The SPC-2 RESERVE does not contain a size in the SCSI CDB. 2329 * Assume the passthrough or $FABRIC_MOD will tell us about it. 2330 */ 2331 if (cdb[0] == RESERVE_10) 2332 *size = get_unaligned_be16(&cdb[7]); 2333 else 2334 *size = cmd->data_length; 2335 2336 cmd->execute_cmd = target_scsi2_reservation_reserve; 2337 break; 2338 case REQUEST_SENSE: 2339 *size = cdb[4]; 2340 cmd->execute_cmd = spc_emulate_request_sense; 2341 break; 2342 case INQUIRY: 2343 *size = get_unaligned_be16(&cdb[3]); 2344 2345 /* 2346 * Do implicit HEAD_OF_QUEUE processing for INQUIRY. 2347 * See spc4r17 section 5.3 2348 */ 2349 cmd->sam_task_attr = TCM_HEAD_TAG; 2350 cmd->execute_cmd = spc_emulate_inquiry; 2351 break; 2352 case SECURITY_PROTOCOL_IN: 2353 case SECURITY_PROTOCOL_OUT: 2354 *size = get_unaligned_be32(&cdb[6]); 2355 break; 2356 case EXTENDED_COPY: 2357 *size = get_unaligned_be32(&cdb[10]); 2358 cmd->execute_cmd = target_do_xcopy; 2359 break; 2360 case RECEIVE_COPY_RESULTS: 2361 *size = get_unaligned_be32(&cdb[10]); 2362 cmd->execute_cmd = target_do_receive_copy_results; 2363 break; 2364 case READ_ATTRIBUTE: 2365 case WRITE_ATTRIBUTE: 2366 *size = get_unaligned_be32(&cdb[10]); 2367 break; 2368 case RECEIVE_DIAGNOSTIC: 2369 case SEND_DIAGNOSTIC: 2370 *size = get_unaligned_be16(&cdb[3]); 2371 break; 2372 case WRITE_BUFFER: 2373 *size = get_unaligned_be24(&cdb[6]); 2374 break; 2375 case REPORT_LUNS: 2376 cmd->execute_cmd = spc_emulate_report_luns; 2377 *size = get_unaligned_be32(&cdb[6]); 2378 /* 2379 * Do implicit HEAD_OF_QUEUE processing for REPORT_LUNS 2380 * See spc4r17 section 5.3 2381 */ 2382 cmd->sam_task_attr = TCM_HEAD_TAG; 2383 break; 2384 case TEST_UNIT_READY: 2385 cmd->execute_cmd = spc_emulate_testunitready; 2386 *size = 0; 2387 break; 2388 case MAINTENANCE_IN: 2389 if (dev->transport->get_device_type(dev) != TYPE_ROM) { 2390 /* 2391 * MAINTENANCE_IN from SCC-2 2392 * Check for emulated MI_REPORT_TARGET_PGS 2393 */ 2394 if ((cdb[1] & 0x1f) == MI_REPORT_TARGET_PGS) { 2395 cmd->execute_cmd = 2396 target_emulate_report_target_port_groups; 2397 } 2398 if ((cdb[1] & 0x1f) == 2399 MI_REPORT_SUPPORTED_OPERATION_CODES) 2400 cmd->execute_cmd = 2401 spc_emulate_report_supp_op_codes; 2402 *size = get_unaligned_be32(&cdb[6]); 2403 } else { 2404 /* 2405 * GPCMD_SEND_KEY from multi media commands 2406 */ 2407 *size = get_unaligned_be16(&cdb[8]); 2408 } 2409 break; 2410 case MAINTENANCE_OUT: 2411 if (dev->transport->get_device_type(dev) != TYPE_ROM) { 2412 /* 2413 * MAINTENANCE_OUT from SCC-2 2414 * Check for emulated MO_SET_TARGET_PGS. 2415 */ 2416 if (cdb[1] == MO_SET_TARGET_PGS) { 2417 cmd->execute_cmd = 2418 target_emulate_set_target_port_groups; 2419 } 2420 *size = get_unaligned_be32(&cdb[6]); 2421 } else { 2422 /* 2423 * GPCMD_SEND_KEY from multi media commands 2424 */ 2425 *size = get_unaligned_be16(&cdb[8]); 2426 } 2427 break; 2428 default: 2429 return TCM_UNSUPPORTED_SCSI_OPCODE; 2430 } 2431 2432 return 0; 2433 } 2434 EXPORT_SYMBOL(spc_parse_cdb); 2435