1 /* 2 * Sonics Silicon Backplane 3 * Subsystem core 4 * 5 * Copyright 2005, Broadcom Corporation 6 * Copyright 2006, 2007, Michael Buesch <m@bues.ch> 7 * 8 * Licensed under the GNU/GPL. See COPYING for details. 9 */ 10 11 #include "ssb_private.h" 12 13 #include <linux/delay.h> 14 #include <linux/io.h> 15 #include <linux/module.h> 16 #include <linux/platform_device.h> 17 #include <linux/ssb/ssb.h> 18 #include <linux/ssb/ssb_regs.h> 19 #include <linux/ssb/ssb_driver_gige.h> 20 #include <linux/dma-mapping.h> 21 #include <linux/pci.h> 22 #include <linux/mmc/sdio_func.h> 23 #include <linux/slab.h> 24 25 #include <pcmcia/cistpl.h> 26 #include <pcmcia/ds.h> 27 28 29 MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); 30 MODULE_LICENSE("GPL"); 31 32 33 /* Temporary list of yet-to-be-attached buses */ 34 static LIST_HEAD(attach_queue); 35 /* List if running buses */ 36 static LIST_HEAD(buses); 37 /* Software ID counter */ 38 static unsigned int next_busnumber; 39 /* buses_mutes locks the two buslists and the next_busnumber. 40 * Don't lock this directly, but use ssb_buses_[un]lock() below. 41 */ 42 static DEFINE_MUTEX(buses_mutex); 43 44 /* There are differences in the codeflow, if the bus is 45 * initialized from early boot, as various needed services 46 * are not available early. This is a mechanism to delay 47 * these initializations to after early boot has finished. 48 * It's also used to avoid mutex locking, as that's not 49 * available and needed early. 50 */ 51 static bool ssb_is_early_boot = 1; 52 53 static void ssb_buses_lock(void); 54 static void ssb_buses_unlock(void); 55 56 57 #ifdef CONFIG_SSB_PCIHOST 58 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) 59 { 60 struct ssb_bus *bus; 61 62 ssb_buses_lock(); 63 list_for_each_entry(bus, &buses, list) { 64 if (bus->bustype == SSB_BUSTYPE_PCI && 65 bus->host_pci == pdev) 66 goto found; 67 } 68 bus = NULL; 69 found: 70 ssb_buses_unlock(); 71 72 return bus; 73 } 74 #endif /* CONFIG_SSB_PCIHOST */ 75 76 #ifdef CONFIG_SSB_PCMCIAHOST 77 struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev) 78 { 79 struct ssb_bus *bus; 80 81 ssb_buses_lock(); 82 list_for_each_entry(bus, &buses, list) { 83 if (bus->bustype == SSB_BUSTYPE_PCMCIA && 84 bus->host_pcmcia == pdev) 85 goto found; 86 } 87 bus = NULL; 88 found: 89 ssb_buses_unlock(); 90 91 return bus; 92 } 93 #endif /* CONFIG_SSB_PCMCIAHOST */ 94 95 int ssb_for_each_bus_call(unsigned long data, 96 int (*func)(struct ssb_bus *bus, unsigned long data)) 97 { 98 struct ssb_bus *bus; 99 int res; 100 101 ssb_buses_lock(); 102 list_for_each_entry(bus, &buses, list) { 103 res = func(bus, data); 104 if (res >= 0) { 105 ssb_buses_unlock(); 106 return res; 107 } 108 } 109 ssb_buses_unlock(); 110 111 return -ENODEV; 112 } 113 114 static struct ssb_device *ssb_device_get(struct ssb_device *dev) 115 { 116 if (dev) 117 get_device(dev->dev); 118 return dev; 119 } 120 121 static void ssb_device_put(struct ssb_device *dev) 122 { 123 if (dev) 124 put_device(dev->dev); 125 } 126 127 static int ssb_device_resume(struct device *dev) 128 { 129 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 130 struct ssb_driver *ssb_drv; 131 int err = 0; 132 133 if (dev->driver) { 134 ssb_drv = drv_to_ssb_drv(dev->driver); 135 if (ssb_drv && ssb_drv->resume) 136 err = ssb_drv->resume(ssb_dev); 137 if (err) 138 goto out; 139 } 140 out: 141 return err; 142 } 143 144 static int ssb_device_suspend(struct device *dev, pm_message_t state) 145 { 146 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 147 struct ssb_driver *ssb_drv; 148 int err = 0; 149 150 if (dev->driver) { 151 ssb_drv = drv_to_ssb_drv(dev->driver); 152 if (ssb_drv && ssb_drv->suspend) 153 err = ssb_drv->suspend(ssb_dev, state); 154 if (err) 155 goto out; 156 } 157 out: 158 return err; 159 } 160 161 int ssb_bus_resume(struct ssb_bus *bus) 162 { 163 int err; 164 165 /* Reset HW state information in memory, so that HW is 166 * completely reinitialized. 167 */ 168 bus->mapped_device = NULL; 169 #ifdef CONFIG_SSB_DRIVER_PCICORE 170 bus->pcicore.setup_done = 0; 171 #endif 172 173 err = ssb_bus_powerup(bus, 0); 174 if (err) 175 return err; 176 err = ssb_pcmcia_hardware_setup(bus); 177 if (err) { 178 ssb_bus_may_powerdown(bus); 179 return err; 180 } 181 ssb_chipco_resume(&bus->chipco); 182 ssb_bus_may_powerdown(bus); 183 184 return 0; 185 } 186 EXPORT_SYMBOL(ssb_bus_resume); 187 188 int ssb_bus_suspend(struct ssb_bus *bus) 189 { 190 ssb_chipco_suspend(&bus->chipco); 191 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 192 193 return 0; 194 } 195 EXPORT_SYMBOL(ssb_bus_suspend); 196 197 #ifdef CONFIG_SSB_SPROM 198 /** ssb_devices_freeze - Freeze all devices on the bus. 199 * 200 * After freezing no device driver will be handling a device 201 * on this bus anymore. ssb_devices_thaw() must be called after 202 * a successful freeze to reactivate the devices. 203 * 204 * @bus: The bus. 205 * @ctx: Context structure. Pass this to ssb_devices_thaw(). 206 */ 207 int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) 208 { 209 struct ssb_device *sdev; 210 struct ssb_driver *sdrv; 211 unsigned int i; 212 213 memset(ctx, 0, sizeof(*ctx)); 214 ctx->bus = bus; 215 WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); 216 217 for (i = 0; i < bus->nr_devices; i++) { 218 sdev = ssb_device_get(&bus->devices[i]); 219 220 if (!sdev->dev || !sdev->dev->driver || 221 !device_is_registered(sdev->dev)) { 222 ssb_device_put(sdev); 223 continue; 224 } 225 sdrv = drv_to_ssb_drv(sdev->dev->driver); 226 if (WARN_ON(!sdrv->remove)) 227 continue; 228 sdrv->remove(sdev); 229 ctx->device_frozen[i] = 1; 230 } 231 232 return 0; 233 } 234 235 /** ssb_devices_thaw - Unfreeze all devices on the bus. 236 * 237 * This will re-attach the device drivers and re-init the devices. 238 * 239 * @ctx: The context structure from ssb_devices_freeze() 240 */ 241 int ssb_devices_thaw(struct ssb_freeze_context *ctx) 242 { 243 struct ssb_bus *bus = ctx->bus; 244 struct ssb_device *sdev; 245 struct ssb_driver *sdrv; 246 unsigned int i; 247 int err, result = 0; 248 249 for (i = 0; i < bus->nr_devices; i++) { 250 if (!ctx->device_frozen[i]) 251 continue; 252 sdev = &bus->devices[i]; 253 254 if (WARN_ON(!sdev->dev || !sdev->dev->driver)) 255 continue; 256 sdrv = drv_to_ssb_drv(sdev->dev->driver); 257 if (WARN_ON(!sdrv || !sdrv->probe)) 258 continue; 259 260 err = sdrv->probe(sdev, &sdev->id); 261 if (err) { 262 dev_err(sdev->dev, 263 "Failed to thaw device %s\n", 264 dev_name(sdev->dev)); 265 result = err; 266 } 267 ssb_device_put(sdev); 268 } 269 270 return result; 271 } 272 #endif /* CONFIG_SSB_SPROM */ 273 274 static void ssb_device_shutdown(struct device *dev) 275 { 276 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 277 struct ssb_driver *ssb_drv; 278 279 if (!dev->driver) 280 return; 281 ssb_drv = drv_to_ssb_drv(dev->driver); 282 if (ssb_drv && ssb_drv->shutdown) 283 ssb_drv->shutdown(ssb_dev); 284 } 285 286 static void ssb_device_remove(struct device *dev) 287 { 288 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 289 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 290 291 if (ssb_drv && ssb_drv->remove) 292 ssb_drv->remove(ssb_dev); 293 ssb_device_put(ssb_dev); 294 } 295 296 static int ssb_device_probe(struct device *dev) 297 { 298 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 299 struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); 300 int err = 0; 301 302 ssb_device_get(ssb_dev); 303 if (ssb_drv && ssb_drv->probe) 304 err = ssb_drv->probe(ssb_dev, &ssb_dev->id); 305 if (err) 306 ssb_device_put(ssb_dev); 307 308 return err; 309 } 310 311 static int ssb_match_devid(const struct ssb_device_id *tabid, 312 const struct ssb_device_id *devid) 313 { 314 if ((tabid->vendor != devid->vendor) && 315 tabid->vendor != SSB_ANY_VENDOR) 316 return 0; 317 if ((tabid->coreid != devid->coreid) && 318 tabid->coreid != SSB_ANY_ID) 319 return 0; 320 if ((tabid->revision != devid->revision) && 321 tabid->revision != SSB_ANY_REV) 322 return 0; 323 return 1; 324 } 325 326 static int ssb_bus_match(struct device *dev, struct device_driver *drv) 327 { 328 struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 329 struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); 330 const struct ssb_device_id *id; 331 332 for (id = ssb_drv->id_table; 333 id->vendor || id->coreid || id->revision; 334 id++) { 335 if (ssb_match_devid(id, &ssb_dev->id)) 336 return 1; /* found */ 337 } 338 339 return 0; 340 } 341 342 static int ssb_device_uevent(const struct device *dev, struct kobj_uevent_env *env) 343 { 344 const struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); 345 346 if (!dev) 347 return -ENODEV; 348 349 return add_uevent_var(env, 350 "MODALIAS=ssb:v%04Xid%04Xrev%02X", 351 ssb_dev->id.vendor, ssb_dev->id.coreid, 352 ssb_dev->id.revision); 353 } 354 355 #define ssb_config_attr(attrib, field, format_string) \ 356 static ssize_t \ 357 attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ 358 { \ 359 return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ 360 } \ 361 static DEVICE_ATTR_RO(attrib); 362 363 ssb_config_attr(core_num, core_index, "%u\n") 364 ssb_config_attr(coreid, id.coreid, "0x%04x\n") 365 ssb_config_attr(vendor, id.vendor, "0x%04x\n") 366 ssb_config_attr(revision, id.revision, "%u\n") 367 ssb_config_attr(irq, irq, "%u\n") 368 static ssize_t 369 name_show(struct device *dev, struct device_attribute *attr, char *buf) 370 { 371 return sprintf(buf, "%s\n", 372 ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); 373 } 374 static DEVICE_ATTR_RO(name); 375 376 static struct attribute *ssb_device_attrs[] = { 377 &dev_attr_name.attr, 378 &dev_attr_core_num.attr, 379 &dev_attr_coreid.attr, 380 &dev_attr_vendor.attr, 381 &dev_attr_revision.attr, 382 &dev_attr_irq.attr, 383 NULL, 384 }; 385 ATTRIBUTE_GROUPS(ssb_device); 386 387 static struct bus_type ssb_bustype = { 388 .name = "ssb", 389 .match = ssb_bus_match, 390 .probe = ssb_device_probe, 391 .remove = ssb_device_remove, 392 .shutdown = ssb_device_shutdown, 393 .suspend = ssb_device_suspend, 394 .resume = ssb_device_resume, 395 .uevent = ssb_device_uevent, 396 .dev_groups = ssb_device_groups, 397 }; 398 399 static void ssb_buses_lock(void) 400 { 401 /* See the comment at the ssb_is_early_boot definition */ 402 if (!ssb_is_early_boot) 403 mutex_lock(&buses_mutex); 404 } 405 406 static void ssb_buses_unlock(void) 407 { 408 /* See the comment at the ssb_is_early_boot definition */ 409 if (!ssb_is_early_boot) 410 mutex_unlock(&buses_mutex); 411 } 412 413 static void ssb_devices_unregister(struct ssb_bus *bus) 414 { 415 struct ssb_device *sdev; 416 int i; 417 418 for (i = bus->nr_devices - 1; i >= 0; i--) { 419 sdev = &(bus->devices[i]); 420 if (sdev->dev) 421 device_unregister(sdev->dev); 422 } 423 424 #ifdef CONFIG_SSB_EMBEDDED 425 if (bus->bustype == SSB_BUSTYPE_SSB) 426 platform_device_unregister(bus->watchdog); 427 #endif 428 } 429 430 void ssb_bus_unregister(struct ssb_bus *bus) 431 { 432 int err; 433 434 err = ssb_gpio_unregister(bus); 435 if (err) 436 pr_debug("Can not unregister GPIO driver: %i\n", err); 437 438 ssb_buses_lock(); 439 ssb_devices_unregister(bus); 440 list_del(&bus->list); 441 ssb_buses_unlock(); 442 443 ssb_pcmcia_exit(bus); 444 ssb_pci_exit(bus); 445 ssb_iounmap(bus); 446 } 447 EXPORT_SYMBOL(ssb_bus_unregister); 448 449 static void ssb_release_dev(struct device *dev) 450 { 451 struct __ssb_dev_wrapper *devwrap; 452 453 devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); 454 kfree(devwrap); 455 } 456 457 static int ssb_devices_register(struct ssb_bus *bus) 458 { 459 struct ssb_device *sdev; 460 struct device *dev; 461 struct __ssb_dev_wrapper *devwrap; 462 int i, err = 0; 463 int dev_idx = 0; 464 465 for (i = 0; i < bus->nr_devices; i++) { 466 sdev = &(bus->devices[i]); 467 468 /* We don't register SSB-system devices to the kernel, 469 * as the drivers for them are built into SSB. 470 */ 471 switch (sdev->id.coreid) { 472 case SSB_DEV_CHIPCOMMON: 473 case SSB_DEV_PCI: 474 case SSB_DEV_PCIE: 475 case SSB_DEV_PCMCIA: 476 case SSB_DEV_MIPS: 477 case SSB_DEV_MIPS_3302: 478 case SSB_DEV_EXTIF: 479 continue; 480 } 481 482 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); 483 if (!devwrap) { 484 err = -ENOMEM; 485 goto error; 486 } 487 dev = &devwrap->dev; 488 devwrap->sdev = sdev; 489 490 dev->release = ssb_release_dev; 491 dev->bus = &ssb_bustype; 492 dev_set_name(dev, "ssb%u:%d", bus->busnumber, dev_idx); 493 494 switch (bus->bustype) { 495 case SSB_BUSTYPE_PCI: 496 #ifdef CONFIG_SSB_PCIHOST 497 sdev->irq = bus->host_pci->irq; 498 dev->parent = &bus->host_pci->dev; 499 sdev->dma_dev = dev->parent; 500 #endif 501 break; 502 case SSB_BUSTYPE_PCMCIA: 503 #ifdef CONFIG_SSB_PCMCIAHOST 504 sdev->irq = bus->host_pcmcia->irq; 505 dev->parent = &bus->host_pcmcia->dev; 506 #endif 507 break; 508 case SSB_BUSTYPE_SDIO: 509 #ifdef CONFIG_SSB_SDIOHOST 510 dev->parent = &bus->host_sdio->dev; 511 #endif 512 break; 513 case SSB_BUSTYPE_SSB: 514 dev->dma_mask = &dev->coherent_dma_mask; 515 sdev->dma_dev = dev; 516 break; 517 } 518 519 sdev->dev = dev; 520 err = device_register(dev); 521 if (err) { 522 pr_err("Could not register %s\n", dev_name(dev)); 523 /* Set dev to NULL to not unregister 524 * dev on error unwinding. 525 */ 526 sdev->dev = NULL; 527 put_device(dev); 528 goto error; 529 } 530 dev_idx++; 531 } 532 533 #ifdef CONFIG_SSB_DRIVER_MIPS 534 if (bus->mipscore.pflash.present) { 535 err = platform_device_register(&ssb_pflash_dev); 536 if (err) 537 pr_err("Error registering parallel flash\n"); 538 } 539 #endif 540 541 #ifdef CONFIG_SSB_SFLASH 542 if (bus->mipscore.sflash.present) { 543 err = platform_device_register(&ssb_sflash_dev); 544 if (err) 545 pr_err("Error registering serial flash\n"); 546 } 547 #endif 548 549 return 0; 550 error: 551 /* Unwind the already registered devices. */ 552 ssb_devices_unregister(bus); 553 return err; 554 } 555 556 /* Needs ssb_buses_lock() */ 557 static int ssb_attach_queued_buses(void) 558 { 559 struct ssb_bus *bus, *n; 560 int err = 0; 561 int drop_them_all = 0; 562 563 list_for_each_entry_safe(bus, n, &attach_queue, list) { 564 if (drop_them_all) { 565 list_del(&bus->list); 566 continue; 567 } 568 /* Can't init the PCIcore in ssb_bus_register(), as that 569 * is too early in boot for embedded systems 570 * (no udelay() available). So do it here in attach stage. 571 */ 572 err = ssb_bus_powerup(bus, 0); 573 if (err) 574 goto error; 575 ssb_pcicore_init(&bus->pcicore); 576 if (bus->bustype == SSB_BUSTYPE_SSB) 577 ssb_watchdog_register(bus); 578 579 err = ssb_gpio_init(bus); 580 if (err == -ENOTSUPP) 581 pr_debug("GPIO driver not activated\n"); 582 else if (err) 583 pr_debug("Error registering GPIO driver: %i\n", err); 584 585 ssb_bus_may_powerdown(bus); 586 587 err = ssb_devices_register(bus); 588 error: 589 if (err) { 590 drop_them_all = 1; 591 list_del(&bus->list); 592 continue; 593 } 594 list_move_tail(&bus->list, &buses); 595 } 596 597 return err; 598 } 599 600 static int ssb_fetch_invariants(struct ssb_bus *bus, 601 ssb_invariants_func_t get_invariants) 602 { 603 struct ssb_init_invariants iv; 604 int err; 605 606 memset(&iv, 0, sizeof(iv)); 607 err = get_invariants(bus, &iv); 608 if (err) 609 goto out; 610 memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); 611 memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); 612 bus->has_cardbus_slot = iv.has_cardbus_slot; 613 out: 614 return err; 615 } 616 617 static int __maybe_unused 618 ssb_bus_register(struct ssb_bus *bus, 619 ssb_invariants_func_t get_invariants, 620 unsigned long baseaddr) 621 { 622 int err; 623 624 spin_lock_init(&bus->bar_lock); 625 INIT_LIST_HEAD(&bus->list); 626 #ifdef CONFIG_SSB_EMBEDDED 627 spin_lock_init(&bus->gpio_lock); 628 #endif 629 630 /* Powerup the bus */ 631 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 632 if (err) 633 goto out; 634 635 /* Init SDIO-host device (if any), before the scan */ 636 err = ssb_sdio_init(bus); 637 if (err) 638 goto err_disable_xtal; 639 640 ssb_buses_lock(); 641 bus->busnumber = next_busnumber; 642 /* Scan for devices (cores) */ 643 err = ssb_bus_scan(bus, baseaddr); 644 if (err) 645 goto err_sdio_exit; 646 647 /* Init PCI-host device (if any) */ 648 err = ssb_pci_init(bus); 649 if (err) 650 goto err_unmap; 651 /* Init PCMCIA-host device (if any) */ 652 err = ssb_pcmcia_init(bus); 653 if (err) 654 goto err_pci_exit; 655 656 /* Initialize basic system devices (if available) */ 657 err = ssb_bus_powerup(bus, 0); 658 if (err) 659 goto err_pcmcia_exit; 660 ssb_chipcommon_init(&bus->chipco); 661 ssb_extif_init(&bus->extif); 662 ssb_mipscore_init(&bus->mipscore); 663 err = ssb_fetch_invariants(bus, get_invariants); 664 if (err) { 665 ssb_bus_may_powerdown(bus); 666 goto err_pcmcia_exit; 667 } 668 ssb_bus_may_powerdown(bus); 669 670 /* Queue it for attach. 671 * See the comment at the ssb_is_early_boot definition. 672 */ 673 list_add_tail(&bus->list, &attach_queue); 674 if (!ssb_is_early_boot) { 675 /* This is not early boot, so we must attach the bus now */ 676 err = ssb_attach_queued_buses(); 677 if (err) 678 goto err_dequeue; 679 } 680 next_busnumber++; 681 ssb_buses_unlock(); 682 683 out: 684 return err; 685 686 err_dequeue: 687 list_del(&bus->list); 688 err_pcmcia_exit: 689 ssb_pcmcia_exit(bus); 690 err_pci_exit: 691 ssb_pci_exit(bus); 692 err_unmap: 693 ssb_iounmap(bus); 694 err_sdio_exit: 695 ssb_sdio_exit(bus); 696 err_disable_xtal: 697 ssb_buses_unlock(); 698 ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 699 return err; 700 } 701 702 #ifdef CONFIG_SSB_PCIHOST 703 int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci) 704 { 705 int err; 706 707 bus->bustype = SSB_BUSTYPE_PCI; 708 bus->host_pci = host_pci; 709 bus->ops = &ssb_pci_ops; 710 711 err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); 712 if (!err) { 713 dev_info(&host_pci->dev, 714 "Sonics Silicon Backplane found on PCI device %s\n", 715 dev_name(&host_pci->dev)); 716 } else { 717 dev_err(&host_pci->dev, 718 "Failed to register PCI version of SSB with error %d\n", 719 err); 720 } 721 722 return err; 723 } 724 #endif /* CONFIG_SSB_PCIHOST */ 725 726 #ifdef CONFIG_SSB_PCMCIAHOST 727 int ssb_bus_pcmciabus_register(struct ssb_bus *bus, 728 struct pcmcia_device *pcmcia_dev, 729 unsigned long baseaddr) 730 { 731 int err; 732 733 bus->bustype = SSB_BUSTYPE_PCMCIA; 734 bus->host_pcmcia = pcmcia_dev; 735 bus->ops = &ssb_pcmcia_ops; 736 737 err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); 738 if (!err) { 739 dev_info(&pcmcia_dev->dev, 740 "Sonics Silicon Backplane found on PCMCIA device %s\n", 741 pcmcia_dev->devname); 742 } 743 744 return err; 745 } 746 #endif /* CONFIG_SSB_PCMCIAHOST */ 747 748 #ifdef CONFIG_SSB_SDIOHOST 749 int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func, 750 unsigned int quirks) 751 { 752 int err; 753 754 bus->bustype = SSB_BUSTYPE_SDIO; 755 bus->host_sdio = func; 756 bus->ops = &ssb_sdio_ops; 757 bus->quirks = quirks; 758 759 err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); 760 if (!err) { 761 dev_info(&func->dev, 762 "Sonics Silicon Backplane found on SDIO device %s\n", 763 sdio_func_id(func)); 764 } 765 766 return err; 767 } 768 EXPORT_SYMBOL(ssb_bus_sdiobus_register); 769 #endif /* CONFIG_SSB_PCMCIAHOST */ 770 771 #ifdef CONFIG_SSB_HOST_SOC 772 int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr) 773 { 774 int err; 775 776 bus->bustype = SSB_BUSTYPE_SSB; 777 bus->ops = &ssb_host_soc_ops; 778 779 err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr); 780 if (!err) { 781 pr_info("Sonics Silicon Backplane found at address 0x%08lX\n", 782 baseaddr); 783 } 784 785 return err; 786 } 787 #endif 788 789 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) 790 { 791 drv->drv.name = drv->name; 792 drv->drv.bus = &ssb_bustype; 793 drv->drv.owner = owner; 794 795 return driver_register(&drv->drv); 796 } 797 EXPORT_SYMBOL(__ssb_driver_register); 798 799 void ssb_driver_unregister(struct ssb_driver *drv) 800 { 801 driver_unregister(&drv->drv); 802 } 803 EXPORT_SYMBOL(ssb_driver_unregister); 804 805 void ssb_set_devtypedata(struct ssb_device *dev, void *data) 806 { 807 struct ssb_bus *bus = dev->bus; 808 struct ssb_device *ent; 809 int i; 810 811 for (i = 0; i < bus->nr_devices; i++) { 812 ent = &(bus->devices[i]); 813 if (ent->id.vendor != dev->id.vendor) 814 continue; 815 if (ent->id.coreid != dev->id.coreid) 816 continue; 817 818 ent->devtypedata = data; 819 } 820 } 821 EXPORT_SYMBOL(ssb_set_devtypedata); 822 823 static u32 clkfactor_f6_resolve(u32 v) 824 { 825 /* map the magic values */ 826 switch (v) { 827 case SSB_CHIPCO_CLK_F6_2: 828 return 2; 829 case SSB_CHIPCO_CLK_F6_3: 830 return 3; 831 case SSB_CHIPCO_CLK_F6_4: 832 return 4; 833 case SSB_CHIPCO_CLK_F6_5: 834 return 5; 835 case SSB_CHIPCO_CLK_F6_6: 836 return 6; 837 case SSB_CHIPCO_CLK_F6_7: 838 return 7; 839 } 840 return 1; 841 } 842 843 /* Calculate the speed the backplane would run at a given set of clockcontrol values */ 844 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) 845 { 846 u32 n1, n2, clock, m1, m2, m3, mc; 847 848 n1 = (n & SSB_CHIPCO_CLK_N1); 849 n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); 850 851 switch (plltype) { 852 case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ 853 if (m & SSB_CHIPCO_CLK_T6_MMASK) 854 return SSB_CHIPCO_CLK_T6_M1; 855 return SSB_CHIPCO_CLK_T6_M0; 856 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 857 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 858 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 859 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 860 n1 = clkfactor_f6_resolve(n1); 861 n2 += SSB_CHIPCO_CLK_F5_BIAS; 862 break; 863 case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ 864 n1 += SSB_CHIPCO_CLK_T2_BIAS; 865 n2 += SSB_CHIPCO_CLK_T2_BIAS; 866 WARN_ON(!((n1 >= 2) && (n1 <= 7))); 867 WARN_ON(!((n2 >= 5) && (n2 <= 23))); 868 break; 869 case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ 870 return 100000000; 871 default: 872 WARN_ON(1); 873 } 874 875 switch (plltype) { 876 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 877 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 878 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; 879 break; 880 default: 881 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; 882 } 883 if (!clock) 884 return 0; 885 886 m1 = (m & SSB_CHIPCO_CLK_M1); 887 m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); 888 m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); 889 mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); 890 891 switch (plltype) { 892 case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ 893 case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ 894 case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ 895 case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ 896 m1 = clkfactor_f6_resolve(m1); 897 if ((plltype == SSB_PLLTYPE_1) || 898 (plltype == SSB_PLLTYPE_3)) 899 m2 += SSB_CHIPCO_CLK_F5_BIAS; 900 else 901 m2 = clkfactor_f6_resolve(m2); 902 m3 = clkfactor_f6_resolve(m3); 903 904 switch (mc) { 905 case SSB_CHIPCO_CLK_MC_BYPASS: 906 return clock; 907 case SSB_CHIPCO_CLK_MC_M1: 908 return (clock / m1); 909 case SSB_CHIPCO_CLK_MC_M1M2: 910 return (clock / (m1 * m2)); 911 case SSB_CHIPCO_CLK_MC_M1M2M3: 912 return (clock / (m1 * m2 * m3)); 913 case SSB_CHIPCO_CLK_MC_M1M3: 914 return (clock / (m1 * m3)); 915 } 916 return 0; 917 case SSB_PLLTYPE_2: 918 m1 += SSB_CHIPCO_CLK_T2_BIAS; 919 m2 += SSB_CHIPCO_CLK_T2M2_BIAS; 920 m3 += SSB_CHIPCO_CLK_T2_BIAS; 921 WARN_ON(!((m1 >= 2) && (m1 <= 7))); 922 WARN_ON(!((m2 >= 3) && (m2 <= 10))); 923 WARN_ON(!((m3 >= 2) && (m3 <= 7))); 924 925 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) 926 clock /= m1; 927 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) 928 clock /= m2; 929 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) 930 clock /= m3; 931 return clock; 932 default: 933 WARN_ON(1); 934 } 935 return 0; 936 } 937 938 /* Get the current speed the backplane is running at */ 939 u32 ssb_clockspeed(struct ssb_bus *bus) 940 { 941 u32 rate; 942 u32 plltype; 943 u32 clkctl_n, clkctl_m; 944 945 if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) 946 return ssb_pmu_get_controlclock(&bus->chipco); 947 948 if (ssb_extif_available(&bus->extif)) 949 ssb_extif_get_clockcontrol(&bus->extif, &plltype, 950 &clkctl_n, &clkctl_m); 951 else if (bus->chipco.dev) 952 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, 953 &clkctl_n, &clkctl_m); 954 else 955 return 0; 956 957 if (bus->chip_id == 0x5365) { 958 rate = 100000000; 959 } else { 960 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); 961 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ 962 rate /= 2; 963 } 964 965 return rate; 966 } 967 EXPORT_SYMBOL(ssb_clockspeed); 968 969 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) 970 { 971 u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; 972 973 /* The REJECT bit seems to be different for Backplane rev 2.3 */ 974 switch (rev) { 975 case SSB_IDLOW_SSBREV_22: 976 case SSB_IDLOW_SSBREV_24: 977 case SSB_IDLOW_SSBREV_26: 978 return SSB_TMSLOW_REJECT; 979 case SSB_IDLOW_SSBREV_23: 980 return SSB_TMSLOW_REJECT_23; 981 case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ 982 case SSB_IDLOW_SSBREV_27: /* same here */ 983 return SSB_TMSLOW_REJECT; /* this is a guess */ 984 case SSB_IDLOW_SSBREV: 985 break; 986 default: 987 WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); 988 } 989 return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); 990 } 991 992 int ssb_device_is_enabled(struct ssb_device *dev) 993 { 994 u32 val; 995 u32 reject; 996 997 reject = ssb_tmslow_reject_bitmask(dev); 998 val = ssb_read32(dev, SSB_TMSLOW); 999 val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; 1000 1001 return (val == SSB_TMSLOW_CLOCK); 1002 } 1003 EXPORT_SYMBOL(ssb_device_is_enabled); 1004 1005 static void ssb_flush_tmslow(struct ssb_device *dev) 1006 { 1007 /* Make _really_ sure the device has finished the TMSLOW 1008 * register write transaction, as we risk running into 1009 * a machine check exception otherwise. 1010 * Do this by reading the register back to commit the 1011 * PCI write and delay an additional usec for the device 1012 * to react to the change. 1013 */ 1014 ssb_read32(dev, SSB_TMSLOW); 1015 udelay(1); 1016 } 1017 1018 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) 1019 { 1020 u32 val; 1021 1022 ssb_device_disable(dev, core_specific_flags); 1023 ssb_write32(dev, SSB_TMSLOW, 1024 SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | 1025 SSB_TMSLOW_FGC | core_specific_flags); 1026 ssb_flush_tmslow(dev); 1027 1028 /* Clear SERR if set. This is a hw bug workaround. */ 1029 if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) 1030 ssb_write32(dev, SSB_TMSHIGH, 0); 1031 1032 val = ssb_read32(dev, SSB_IMSTATE); 1033 if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { 1034 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); 1035 ssb_write32(dev, SSB_IMSTATE, val); 1036 } 1037 1038 ssb_write32(dev, SSB_TMSLOW, 1039 SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | 1040 core_specific_flags); 1041 ssb_flush_tmslow(dev); 1042 1043 ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | 1044 core_specific_flags); 1045 ssb_flush_tmslow(dev); 1046 } 1047 EXPORT_SYMBOL(ssb_device_enable); 1048 1049 /* Wait for bitmask in a register to get set or cleared. 1050 * timeout is in units of ten-microseconds 1051 */ 1052 static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, 1053 int timeout, int set) 1054 { 1055 int i; 1056 u32 val; 1057 1058 for (i = 0; i < timeout; i++) { 1059 val = ssb_read32(dev, reg); 1060 if (set) { 1061 if ((val & bitmask) == bitmask) 1062 return 0; 1063 } else { 1064 if (!(val & bitmask)) 1065 return 0; 1066 } 1067 udelay(10); 1068 } 1069 dev_err(dev->dev, 1070 "Timeout waiting for bitmask %08X on register %04X to %s\n", 1071 bitmask, reg, set ? "set" : "clear"); 1072 1073 return -ETIMEDOUT; 1074 } 1075 1076 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) 1077 { 1078 u32 reject, val; 1079 1080 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) 1081 return; 1082 1083 reject = ssb_tmslow_reject_bitmask(dev); 1084 1085 if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { 1086 ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); 1087 ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); 1088 ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); 1089 1090 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1091 val = ssb_read32(dev, SSB_IMSTATE); 1092 val |= SSB_IMSTATE_REJECT; 1093 ssb_write32(dev, SSB_IMSTATE, val); 1094 ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, 1095 0); 1096 } 1097 1098 ssb_write32(dev, SSB_TMSLOW, 1099 SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | 1100 reject | SSB_TMSLOW_RESET | 1101 core_specific_flags); 1102 ssb_flush_tmslow(dev); 1103 1104 if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { 1105 val = ssb_read32(dev, SSB_IMSTATE); 1106 val &= ~SSB_IMSTATE_REJECT; 1107 ssb_write32(dev, SSB_IMSTATE, val); 1108 } 1109 } 1110 1111 ssb_write32(dev, SSB_TMSLOW, 1112 reject | SSB_TMSLOW_RESET | 1113 core_specific_flags); 1114 ssb_flush_tmslow(dev); 1115 } 1116 EXPORT_SYMBOL(ssb_device_disable); 1117 1118 /* Some chipsets need routing known for PCIe and 64-bit DMA */ 1119 static bool ssb_dma_translation_special_bit(struct ssb_device *dev) 1120 { 1121 u16 chip_id = dev->bus->chip_id; 1122 1123 if (dev->id.coreid == SSB_DEV_80211) { 1124 return (chip_id == 0x4322 || chip_id == 43221 || 1125 chip_id == 43231 || chip_id == 43222); 1126 } 1127 1128 return false; 1129 } 1130 1131 u32 ssb_dma_translation(struct ssb_device *dev) 1132 { 1133 switch (dev->bus->bustype) { 1134 case SSB_BUSTYPE_SSB: 1135 return 0; 1136 case SSB_BUSTYPE_PCI: 1137 if (pci_is_pcie(dev->bus->host_pci) && 1138 ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) { 1139 return SSB_PCIE_DMA_H32; 1140 } else { 1141 if (ssb_dma_translation_special_bit(dev)) 1142 return SSB_PCIE_DMA_H32; 1143 else 1144 return SSB_PCI_DMA; 1145 } 1146 default: 1147 __ssb_dma_not_implemented(dev); 1148 } 1149 return 0; 1150 } 1151 EXPORT_SYMBOL(ssb_dma_translation); 1152 1153 int ssb_bus_may_powerdown(struct ssb_bus *bus) 1154 { 1155 struct ssb_chipcommon *cc; 1156 int err = 0; 1157 1158 /* On buses where more than one core may be working 1159 * at a time, we must not powerdown stuff if there are 1160 * still cores that may want to run. 1161 */ 1162 if (bus->bustype == SSB_BUSTYPE_SSB) 1163 goto out; 1164 1165 cc = &bus->chipco; 1166 1167 if (!cc->dev) 1168 goto out; 1169 if (cc->dev->id.revision < 5) 1170 goto out; 1171 1172 ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); 1173 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); 1174 if (err) 1175 goto error; 1176 out: 1177 bus->powered_up = 0; 1178 return err; 1179 error: 1180 pr_err("Bus powerdown failed\n"); 1181 goto out; 1182 } 1183 EXPORT_SYMBOL(ssb_bus_may_powerdown); 1184 1185 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) 1186 { 1187 int err; 1188 enum ssb_clkmode mode; 1189 1190 err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); 1191 if (err) 1192 goto error; 1193 1194 bus->powered_up = 1; 1195 1196 mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; 1197 ssb_chipco_set_clockmode(&bus->chipco, mode); 1198 1199 return 0; 1200 error: 1201 pr_err("Bus powerup failed\n"); 1202 return err; 1203 } 1204 EXPORT_SYMBOL(ssb_bus_powerup); 1205 1206 static void ssb_broadcast_value(struct ssb_device *dev, 1207 u32 address, u32 data) 1208 { 1209 #ifdef CONFIG_SSB_DRIVER_PCICORE 1210 /* This is used for both, PCI and ChipCommon core, so be careful. */ 1211 BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); 1212 BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); 1213 #endif 1214 1215 ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); 1216 ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ 1217 ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); 1218 ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ 1219 } 1220 1221 void ssb_commit_settings(struct ssb_bus *bus) 1222 { 1223 struct ssb_device *dev; 1224 1225 #ifdef CONFIG_SSB_DRIVER_PCICORE 1226 dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; 1227 #else 1228 dev = bus->chipco.dev; 1229 #endif 1230 if (WARN_ON(!dev)) 1231 return; 1232 /* This forces an update of the cached registers. */ 1233 ssb_broadcast_value(dev, 0xFD8, 0); 1234 } 1235 EXPORT_SYMBOL(ssb_commit_settings); 1236 1237 u32 ssb_admatch_base(u32 adm) 1238 { 1239 u32 base = 0; 1240 1241 switch (adm & SSB_ADM_TYPE) { 1242 case SSB_ADM_TYPE0: 1243 base = (adm & SSB_ADM_BASE0); 1244 break; 1245 case SSB_ADM_TYPE1: 1246 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1247 base = (adm & SSB_ADM_BASE1); 1248 break; 1249 case SSB_ADM_TYPE2: 1250 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1251 base = (adm & SSB_ADM_BASE2); 1252 break; 1253 default: 1254 WARN_ON(1); 1255 } 1256 1257 return base; 1258 } 1259 EXPORT_SYMBOL(ssb_admatch_base); 1260 1261 u32 ssb_admatch_size(u32 adm) 1262 { 1263 u32 size = 0; 1264 1265 switch (adm & SSB_ADM_TYPE) { 1266 case SSB_ADM_TYPE0: 1267 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); 1268 break; 1269 case SSB_ADM_TYPE1: 1270 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1271 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); 1272 break; 1273 case SSB_ADM_TYPE2: 1274 WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ 1275 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); 1276 break; 1277 default: 1278 WARN_ON(1); 1279 } 1280 size = (1 << (size + 1)); 1281 1282 return size; 1283 } 1284 EXPORT_SYMBOL(ssb_admatch_size); 1285 1286 static int __init ssb_modinit(void) 1287 { 1288 int err; 1289 1290 /* See the comment at the ssb_is_early_boot definition */ 1291 ssb_is_early_boot = 0; 1292 err = bus_register(&ssb_bustype); 1293 if (err) 1294 return err; 1295 1296 /* Maybe we already registered some buses at early boot. 1297 * Check for this and attach them 1298 */ 1299 ssb_buses_lock(); 1300 err = ssb_attach_queued_buses(); 1301 ssb_buses_unlock(); 1302 if (err) { 1303 bus_unregister(&ssb_bustype); 1304 goto out; 1305 } 1306 1307 err = b43_pci_ssb_bridge_init(); 1308 if (err) { 1309 pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n"); 1310 /* don't fail SSB init because of this */ 1311 } 1312 err = ssb_host_pcmcia_init(); 1313 if (err) { 1314 pr_err("PCMCIA host initialization failed\n"); 1315 /* don't fail SSB init because of this */ 1316 } 1317 err = ssb_gige_init(); 1318 if (err) { 1319 pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n"); 1320 /* don't fail SSB init because of this */ 1321 err = 0; 1322 } 1323 out: 1324 return err; 1325 } 1326 /* ssb must be initialized after PCI but before the ssb drivers. 1327 * That means we must use some initcall between subsys_initcall 1328 * and device_initcall. 1329 */ 1330 fs_initcall(ssb_modinit); 1331 1332 static void __exit ssb_modexit(void) 1333 { 1334 ssb_gige_exit(); 1335 ssb_host_pcmcia_exit(); 1336 b43_pci_ssb_bridge_exit(); 1337 bus_unregister(&ssb_bustype); 1338 } 1339 module_exit(ssb_modexit) 1340