xref: /linux/drivers/ssb/driver_extif.c (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1 /*
2  * Sonics Silicon Backplane
3  * Broadcom EXTIF core driver
4  *
5  * Copyright 2005, Broadcom Corporation
6  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
7  * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
8  * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
9  *
10  * Licensed under the GNU/GPL. See COPYING for details.
11  */
12 
13 #include "ssb_private.h"
14 
15 #include <linux/serial.h>
16 #include <linux/serial_core.h>
17 #include <linux/serial_reg.h>
18 
19 
20 static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
21 {
22 	return ssb_read32(extif->dev, offset);
23 }
24 
25 static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
26 {
27 	ssb_write32(extif->dev, offset, value);
28 }
29 
30 static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,
31 				       u32 mask, u32 value)
32 {
33 	value &= mask;
34 	value |= extif_read32(extif, offset) & ~mask;
35 	extif_write32(extif, offset, value);
36 
37 	return value;
38 }
39 
40 #ifdef CONFIG_SSB_SERIAL
41 static bool serial_exists(u8 *regs)
42 {
43 	u8 save_mcr, msr = 0;
44 
45 	if (regs) {
46 		save_mcr = regs[UART_MCR];
47 		regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
48 		msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
49 					| UART_MSR_CTS | UART_MSR_DSR);
50 		regs[UART_MCR] = save_mcr;
51 	}
52 	return (msr == (UART_MSR_DCD | UART_MSR_CTS));
53 }
54 
55 int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
56 {
57 	u32 i, nr_ports = 0;
58 
59 	/* Disable GPIO interrupt initially */
60 	extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
61 	extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
62 
63 	for (i = 0; i < 2; i++) {
64 		void __iomem *uart_regs;
65 
66 		uart_regs = ioremap(SSB_EUART, 16);
67 		if (uart_regs) {
68 			uart_regs += (i * 8);
69 
70 			if (serial_exists(uart_regs) && ports) {
71 				extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
72 
73 				nr_ports++;
74 				ports[i].regs = uart_regs;
75 				ports[i].irq = 2;
76 				ports[i].baud_base = 13500000;
77 				ports[i].reg_shift = 0;
78 			}
79 			iounmap(uart_regs);
80 		}
81 	}
82 	return nr_ports;
83 }
84 #endif /* CONFIG_SSB_SERIAL */
85 
86 void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
87 {
88 	u32 tmp;
89 
90 	/* Initialize extif so we can get to the LEDs and external UART */
91 	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
92 
93 	/* Set timing for the flash */
94 	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
95 	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
96 	tmp |= DIV_ROUND_UP(120, ns);
97 	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
98 
99 	/* Set programmable interface timing for external uart */
100 	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
101 	tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
102 	tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
103 	tmp |= DIV_ROUND_UP(120, ns);
104 	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
105 }
106 
107 void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
108 				u32 *pll_type, u32 *n, u32 *m)
109 {
110 	*pll_type = SSB_PLLTYPE_1;
111 	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
112 	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
113 }
114 
115 u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
116 {
117 	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
118 
119 	return ssb_extif_watchdog_timer_set(extif, ticks);
120 }
121 
122 u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
123 {
124 	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
125 	u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms;
126 
127 	ticks = ssb_extif_watchdog_timer_set(extif, ticks);
128 
129 	return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK;
130 }
131 
132 u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
133 {
134 	if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER)
135 		ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER;
136 	extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
137 
138 	return ticks;
139 }
140 
141 void ssb_extif_init(struct ssb_extif *extif)
142 {
143 	if (!extif->dev)
144 		return; /* We don't have a Extif core */
145 	spin_lock_init(&extif->gpio_lock);
146 }
147 
148 u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
149 {
150 	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
151 }
152 
153 u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
154 {
155 	unsigned long flags;
156 	u32 res = 0;
157 
158 	spin_lock_irqsave(&extif->gpio_lock, flags);
159 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
160 				   mask, value);
161 	spin_unlock_irqrestore(&extif->gpio_lock, flags);
162 
163 	return res;
164 }
165 
166 u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
167 {
168 	unsigned long flags;
169 	u32 res = 0;
170 
171 	spin_lock_irqsave(&extif->gpio_lock, flags);
172 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
173 				   mask, value);
174 	spin_unlock_irqrestore(&extif->gpio_lock, flags);
175 
176 	return res;
177 }
178 
179 u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
180 {
181 	unsigned long flags;
182 	u32 res = 0;
183 
184 	spin_lock_irqsave(&extif->gpio_lock, flags);
185 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
186 	spin_unlock_irqrestore(&extif->gpio_lock, flags);
187 
188 	return res;
189 }
190 
191 u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
192 {
193 	unsigned long flags;
194 	u32 res = 0;
195 
196 	spin_lock_irqsave(&extif->gpio_lock, flags);
197 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
198 	spin_unlock_irqrestore(&extif->gpio_lock, flags);
199 
200 	return res;
201 }
202