xref: /linux/drivers/spi/spi-stm32-qspi.c (revision 5f30ee493044e9ea3a46167e5597a96f5c302adb)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
4  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5  */
6 #include <linux/bitfield.h>
7 #include <linux/clk.h>
8 #include <linux/dmaengine.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/errno.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/io.h>
13 #include <linux/iopoll.h>
14 #include <linux/interrupt.h>
15 #include <linux/module.h>
16 #include <linux/mutex.h>
17 #include <linux/of.h>
18 #include <linux/pinctrl/consumer.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/platform_device.h>
21 #include <linux/reset.h>
22 #include <linux/sizes.h>
23 #include <linux/spi/spi-mem.h>
24 
25 #define QSPI_CR			0x00
26 #define CR_EN			BIT(0)
27 #define CR_ABORT		BIT(1)
28 #define CR_DMAEN		BIT(2)
29 #define CR_TCEN			BIT(3)
30 #define CR_SSHIFT		BIT(4)
31 #define CR_DFM			BIT(6)
32 #define CR_FSEL			BIT(7)
33 #define CR_FTHRES_SHIFT		8
34 #define CR_TEIE			BIT(16)
35 #define CR_TCIE			BIT(17)
36 #define CR_FTIE			BIT(18)
37 #define CR_SMIE			BIT(19)
38 #define CR_TOIE			BIT(20)
39 #define CR_APMS			BIT(22)
40 #define CR_PRESC_MASK		GENMASK(31, 24)
41 
42 #define QSPI_DCR		0x04
43 #define DCR_FSIZE_MASK		GENMASK(20, 16)
44 
45 #define QSPI_SR			0x08
46 #define SR_TEF			BIT(0)
47 #define SR_TCF			BIT(1)
48 #define SR_FTF			BIT(2)
49 #define SR_SMF			BIT(3)
50 #define SR_TOF			BIT(4)
51 #define SR_BUSY			BIT(5)
52 #define SR_FLEVEL_MASK		GENMASK(13, 8)
53 
54 #define QSPI_FCR		0x0c
55 #define FCR_CTEF		BIT(0)
56 #define FCR_CTCF		BIT(1)
57 #define FCR_CSMF		BIT(3)
58 
59 #define QSPI_DLR		0x10
60 
61 #define QSPI_CCR		0x14
62 #define CCR_INST_MASK		GENMASK(7, 0)
63 #define CCR_IMODE_MASK		GENMASK(9, 8)
64 #define CCR_ADMODE_MASK		GENMASK(11, 10)
65 #define CCR_ADSIZE_MASK		GENMASK(13, 12)
66 #define CCR_DCYC_MASK		GENMASK(22, 18)
67 #define CCR_DMODE_MASK		GENMASK(25, 24)
68 #define CCR_FMODE_MASK		GENMASK(27, 26)
69 #define CCR_FMODE_INDW		(0U << 26)
70 #define CCR_FMODE_INDR		(1U << 26)
71 #define CCR_FMODE_APM		(2U << 26)
72 #define CCR_FMODE_MM		(3U << 26)
73 #define CCR_BUSWIDTH_0		0x0
74 #define CCR_BUSWIDTH_1		0x1
75 #define CCR_BUSWIDTH_2		0x2
76 #define CCR_BUSWIDTH_4		0x3
77 
78 #define QSPI_AR			0x18
79 #define QSPI_ABR		0x1c
80 #define QSPI_DR			0x20
81 #define QSPI_PSMKR		0x24
82 #define QSPI_PSMAR		0x28
83 #define QSPI_PIR		0x2c
84 #define QSPI_LPTR		0x30
85 
86 #define STM32_QSPI_MAX_MMAP_SZ	SZ_256M
87 #define STM32_QSPI_MAX_NORCHIP	2
88 
89 #define STM32_FIFO_TIMEOUT_US 30000
90 #define STM32_BUSY_TIMEOUT_US 100000
91 #define STM32_ABT_TIMEOUT_US 100000
92 #define STM32_COMP_TIMEOUT_MS 1000
93 #define STM32_AUTOSUSPEND_DELAY -1
94 
95 struct stm32_qspi_flash {
96 	u32 cs;
97 	u32 presc;
98 };
99 
100 struct stm32_qspi {
101 	struct device *dev;
102 	struct spi_controller *ctrl;
103 	phys_addr_t phys_base;
104 	void __iomem *io_base;
105 	void __iomem *mm_base;
106 	resource_size_t mm_size;
107 	struct clk *clk;
108 	u32 clk_rate;
109 	struct stm32_qspi_flash flash[STM32_QSPI_MAX_NORCHIP];
110 	struct completion data_completion;
111 	struct completion match_completion;
112 	u32 fmode;
113 
114 	struct dma_chan *dma_chtx;
115 	struct dma_chan *dma_chrx;
116 	struct completion dma_completion;
117 
118 	u32 cr_reg;
119 	u32 dcr_reg;
120 	unsigned long status_timeout;
121 
122 	/*
123 	 * to protect device configuration, could be different between
124 	 * 2 flash access (bk1, bk2)
125 	 */
126 	struct mutex lock;
127 };
128 
129 static irqreturn_t stm32_qspi_irq(int irq, void *dev_id)
130 {
131 	struct stm32_qspi *qspi = (struct stm32_qspi *)dev_id;
132 	u32 cr, sr;
133 
134 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
135 	sr = readl_relaxed(qspi->io_base + QSPI_SR);
136 
137 	if (cr & CR_SMIE && sr & SR_SMF) {
138 		/* disable irq */
139 		cr &= ~CR_SMIE;
140 		writel_relaxed(cr, qspi->io_base + QSPI_CR);
141 		complete(&qspi->match_completion);
142 
143 		return IRQ_HANDLED;
144 	}
145 
146 	if (sr & (SR_TEF | SR_TCF)) {
147 		/* disable irq */
148 		cr &= ~CR_TCIE & ~CR_TEIE;
149 		writel_relaxed(cr, qspi->io_base + QSPI_CR);
150 		complete(&qspi->data_completion);
151 	}
152 
153 	return IRQ_HANDLED;
154 }
155 
156 static void stm32_qspi_read_fifo(u8 *val, void __iomem *addr)
157 {
158 	*val = readb_relaxed(addr);
159 }
160 
161 static void stm32_qspi_write_fifo(u8 *val, void __iomem *addr)
162 {
163 	writeb_relaxed(*val, addr);
164 }
165 
166 static int stm32_qspi_tx_poll(struct stm32_qspi *qspi,
167 			      const struct spi_mem_op *op)
168 {
169 	void (*tx_fifo)(u8 *val, void __iomem *addr);
170 	u32 len = op->data.nbytes, sr;
171 	u8 *buf;
172 	int ret;
173 
174 	if (op->data.dir == SPI_MEM_DATA_IN) {
175 		tx_fifo = stm32_qspi_read_fifo;
176 		buf = op->data.buf.in;
177 
178 	} else {
179 		tx_fifo = stm32_qspi_write_fifo;
180 		buf = (u8 *)op->data.buf.out;
181 	}
182 
183 	while (len--) {
184 		ret = readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_SR,
185 							sr, (sr & SR_FTF), 1,
186 							STM32_FIFO_TIMEOUT_US);
187 		if (ret) {
188 			dev_err(qspi->dev, "fifo timeout (len:%d stat:%#x)\n",
189 				len, sr);
190 			return ret;
191 		}
192 		tx_fifo(buf++, qspi->io_base + QSPI_DR);
193 	}
194 
195 	return 0;
196 }
197 
198 static int stm32_qspi_tx_mm(struct stm32_qspi *qspi,
199 			    const struct spi_mem_op *op)
200 {
201 	memcpy_fromio(op->data.buf.in, qspi->mm_base + op->addr.val,
202 		      op->data.nbytes);
203 	return 0;
204 }
205 
206 static void stm32_qspi_dma_callback(void *arg)
207 {
208 	struct completion *dma_completion = arg;
209 
210 	complete(dma_completion);
211 }
212 
213 static int stm32_qspi_tx_dma(struct stm32_qspi *qspi,
214 			     const struct spi_mem_op *op)
215 {
216 	struct dma_async_tx_descriptor *desc;
217 	enum dma_transfer_direction dma_dir;
218 	struct dma_chan *dma_ch;
219 	struct sg_table sgt;
220 	dma_cookie_t cookie;
221 	u32 cr, t_out;
222 	int err;
223 
224 	if (op->data.dir == SPI_MEM_DATA_IN) {
225 		dma_dir = DMA_DEV_TO_MEM;
226 		dma_ch = qspi->dma_chrx;
227 	} else {
228 		dma_dir = DMA_MEM_TO_DEV;
229 		dma_ch = qspi->dma_chtx;
230 	}
231 
232 	/*
233 	 * spi_map_buf return -EINVAL if the buffer is not DMA-able
234 	 * (DMA-able: in vmalloc | kmap | virt_addr_valid)
235 	 */
236 	err = spi_controller_dma_map_mem_op_data(qspi->ctrl, op, &sgt);
237 	if (err)
238 		return err;
239 
240 	desc = dmaengine_prep_slave_sg(dma_ch, sgt.sgl, sgt.nents,
241 				       dma_dir, DMA_PREP_INTERRUPT);
242 	if (!desc) {
243 		err = -ENOMEM;
244 		goto out_unmap;
245 	}
246 
247 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
248 
249 	reinit_completion(&qspi->dma_completion);
250 	desc->callback = stm32_qspi_dma_callback;
251 	desc->callback_param = &qspi->dma_completion;
252 	cookie = dmaengine_submit(desc);
253 	err = dma_submit_error(cookie);
254 	if (err)
255 		goto out;
256 
257 	dma_async_issue_pending(dma_ch);
258 
259 	writel_relaxed(cr | CR_DMAEN, qspi->io_base + QSPI_CR);
260 
261 	t_out = sgt.nents * STM32_COMP_TIMEOUT_MS;
262 	if (!wait_for_completion_timeout(&qspi->dma_completion,
263 					 msecs_to_jiffies(t_out)))
264 		err = -ETIMEDOUT;
265 
266 	if (err)
267 		dmaengine_terminate_all(dma_ch);
268 
269 out:
270 	writel_relaxed(cr & ~CR_DMAEN, qspi->io_base + QSPI_CR);
271 out_unmap:
272 	spi_controller_dma_unmap_mem_op_data(qspi->ctrl, op, &sgt);
273 
274 	return err;
275 }
276 
277 static int stm32_qspi_tx(struct stm32_qspi *qspi, const struct spi_mem_op *op)
278 {
279 	if (!op->data.nbytes)
280 		return 0;
281 
282 	if (qspi->fmode == CCR_FMODE_MM)
283 		return stm32_qspi_tx_mm(qspi, op);
284 	else if (((op->data.dir == SPI_MEM_DATA_IN && qspi->dma_chrx) ||
285 		 (op->data.dir == SPI_MEM_DATA_OUT && qspi->dma_chtx)) &&
286 		  op->data.nbytes > 4)
287 		if (!stm32_qspi_tx_dma(qspi, op))
288 			return 0;
289 
290 	return stm32_qspi_tx_poll(qspi, op);
291 }
292 
293 static int stm32_qspi_wait_nobusy(struct stm32_qspi *qspi)
294 {
295 	u32 sr;
296 
297 	return readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_SR, sr,
298 						 !(sr & SR_BUSY), 1,
299 						 STM32_BUSY_TIMEOUT_US);
300 }
301 
302 static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi)
303 {
304 	u32 cr, sr;
305 	int err = 0;
306 
307 	if ((readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) ||
308 	    qspi->fmode == CCR_FMODE_APM)
309 		goto out;
310 
311 	reinit_completion(&qspi->data_completion);
312 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
313 	writel_relaxed(cr | CR_TCIE | CR_TEIE, qspi->io_base + QSPI_CR);
314 
315 	if (!wait_for_completion_timeout(&qspi->data_completion,
316 				msecs_to_jiffies(STM32_COMP_TIMEOUT_MS))) {
317 		err = -ETIMEDOUT;
318 	} else {
319 		sr = readl_relaxed(qspi->io_base + QSPI_SR);
320 		if (sr & SR_TEF)
321 			err = -EIO;
322 	}
323 
324 out:
325 	/* clear flags */
326 	writel_relaxed(FCR_CTCF | FCR_CTEF, qspi->io_base + QSPI_FCR);
327 	if (!err)
328 		err = stm32_qspi_wait_nobusy(qspi);
329 
330 	return err;
331 }
332 
333 static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi)
334 {
335 	u32 cr;
336 
337 	reinit_completion(&qspi->match_completion);
338 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
339 	writel_relaxed(cr | CR_SMIE, qspi->io_base + QSPI_CR);
340 
341 	if (!wait_for_completion_timeout(&qspi->match_completion,
342 				msecs_to_jiffies(qspi->status_timeout)))
343 		return -ETIMEDOUT;
344 
345 	writel_relaxed(FCR_CSMF, qspi->io_base + QSPI_FCR);
346 
347 	return 0;
348 }
349 
350 static int stm32_qspi_get_mode(u8 buswidth)
351 {
352 	if (buswidth >= 4)
353 		return CCR_BUSWIDTH_4;
354 
355 	return buswidth;
356 }
357 
358 static int stm32_qspi_send(struct spi_device *spi, const struct spi_mem_op *op)
359 {
360 	struct stm32_qspi *qspi = spi_controller_get_devdata(spi->controller);
361 	struct stm32_qspi_flash *flash = &qspi->flash[spi_get_chipselect(spi, 0)];
362 	u32 ccr, cr;
363 	int timeout, err = 0, err_poll_status = 0;
364 
365 	dev_dbg(qspi->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n",
366 		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
367 		op->dummy.buswidth, op->data.buswidth,
368 		op->addr.val, op->data.nbytes);
369 
370 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
371 	cr &= ~CR_PRESC_MASK & ~CR_FSEL;
372 	cr |= FIELD_PREP(CR_PRESC_MASK, flash->presc);
373 	cr |= FIELD_PREP(CR_FSEL, flash->cs);
374 	writel_relaxed(cr, qspi->io_base + QSPI_CR);
375 
376 	if (op->data.nbytes)
377 		writel_relaxed(op->data.nbytes - 1,
378 			       qspi->io_base + QSPI_DLR);
379 
380 	ccr = qspi->fmode;
381 	ccr |= FIELD_PREP(CCR_INST_MASK, op->cmd.opcode);
382 	ccr |= FIELD_PREP(CCR_IMODE_MASK,
383 			  stm32_qspi_get_mode(op->cmd.buswidth));
384 
385 	if (op->addr.nbytes) {
386 		ccr |= FIELD_PREP(CCR_ADMODE_MASK,
387 				  stm32_qspi_get_mode(op->addr.buswidth));
388 		ccr |= FIELD_PREP(CCR_ADSIZE_MASK, op->addr.nbytes - 1);
389 	}
390 
391 	if (op->dummy.nbytes)
392 		ccr |= FIELD_PREP(CCR_DCYC_MASK,
393 				  op->dummy.nbytes * 8 / op->dummy.buswidth);
394 
395 	if (op->data.nbytes) {
396 		ccr |= FIELD_PREP(CCR_DMODE_MASK,
397 				  stm32_qspi_get_mode(op->data.buswidth));
398 	}
399 
400 	writel_relaxed(ccr, qspi->io_base + QSPI_CCR);
401 
402 	if (op->addr.nbytes && qspi->fmode != CCR_FMODE_MM)
403 		writel_relaxed(op->addr.val, qspi->io_base + QSPI_AR);
404 
405 	if (qspi->fmode == CCR_FMODE_APM)
406 		err_poll_status = stm32_qspi_wait_poll_status(qspi);
407 
408 	err = stm32_qspi_tx(qspi, op);
409 
410 	/*
411 	 * Abort in:
412 	 * -error case
413 	 * -read memory map: prefetching must be stopped if we read the last
414 	 *  byte of device (device size - fifo size). like device size is not
415 	 *  knows, the prefetching is always stop.
416 	 */
417 	if (err || err_poll_status || qspi->fmode == CCR_FMODE_MM)
418 		goto abort;
419 
420 	/* wait end of tx in indirect mode */
421 	err = stm32_qspi_wait_cmd(qspi);
422 	if (err)
423 		goto abort;
424 
425 	return 0;
426 
427 abort:
428 	cr = readl_relaxed(qspi->io_base + QSPI_CR) | CR_ABORT;
429 	writel_relaxed(cr, qspi->io_base + QSPI_CR);
430 
431 	/* wait clear of abort bit by hw */
432 	timeout = readl_relaxed_poll_timeout_atomic(qspi->io_base + QSPI_CR,
433 						    cr, !(cr & CR_ABORT), 1,
434 						    STM32_ABT_TIMEOUT_US);
435 
436 	writel_relaxed(FCR_CTCF | FCR_CSMF, qspi->io_base + QSPI_FCR);
437 
438 	if (err || err_poll_status || timeout)
439 		dev_err(qspi->dev, "%s err:%d err_poll_status:%d abort timeout:%d\n",
440 			__func__, err, err_poll_status, timeout);
441 
442 	return err;
443 }
444 
445 static int stm32_qspi_poll_status(struct spi_mem *mem, const struct spi_mem_op *op,
446 				  u16 mask, u16 match,
447 				  unsigned long initial_delay_us,
448 				  unsigned long polling_rate_us,
449 				  unsigned long timeout_ms)
450 {
451 	struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->controller);
452 	int ret;
453 
454 	if (!spi_mem_supports_op(mem, op))
455 		return -EOPNOTSUPP;
456 
457 	ret = pm_runtime_resume_and_get(qspi->dev);
458 	if (ret < 0)
459 		return ret;
460 
461 	mutex_lock(&qspi->lock);
462 
463 	writel_relaxed(mask, qspi->io_base + QSPI_PSMKR);
464 	writel_relaxed(match, qspi->io_base + QSPI_PSMAR);
465 	qspi->fmode = CCR_FMODE_APM;
466 	qspi->status_timeout = timeout_ms;
467 
468 	ret = stm32_qspi_send(mem->spi, op);
469 	mutex_unlock(&qspi->lock);
470 
471 	pm_runtime_mark_last_busy(qspi->dev);
472 	pm_runtime_put_autosuspend(qspi->dev);
473 
474 	return ret;
475 }
476 
477 static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
478 {
479 	struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->controller);
480 	int ret;
481 
482 	ret = pm_runtime_resume_and_get(qspi->dev);
483 	if (ret < 0)
484 		return ret;
485 
486 	mutex_lock(&qspi->lock);
487 	if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
488 		qspi->fmode = CCR_FMODE_INDR;
489 	else
490 		qspi->fmode = CCR_FMODE_INDW;
491 
492 	ret = stm32_qspi_send(mem->spi, op);
493 	mutex_unlock(&qspi->lock);
494 
495 	pm_runtime_mark_last_busy(qspi->dev);
496 	pm_runtime_put_autosuspend(qspi->dev);
497 
498 	return ret;
499 }
500 
501 static int stm32_qspi_dirmap_create(struct spi_mem_dirmap_desc *desc)
502 {
503 	struct stm32_qspi *qspi = spi_controller_get_devdata(desc->mem->spi->controller);
504 
505 	if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT)
506 		return -EOPNOTSUPP;
507 
508 	/* should never happen, as mm_base == null is an error probe exit condition */
509 	if (!qspi->mm_base && desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
510 		return -EOPNOTSUPP;
511 
512 	if (!qspi->mm_size)
513 		return -EOPNOTSUPP;
514 
515 	return 0;
516 }
517 
518 static ssize_t stm32_qspi_dirmap_read(struct spi_mem_dirmap_desc *desc,
519 				      u64 offs, size_t len, void *buf)
520 {
521 	struct stm32_qspi *qspi = spi_controller_get_devdata(desc->mem->spi->controller);
522 	struct spi_mem_op op;
523 	u32 addr_max;
524 	int ret;
525 
526 	ret = pm_runtime_resume_and_get(qspi->dev);
527 	if (ret < 0)
528 		return ret;
529 
530 	mutex_lock(&qspi->lock);
531 	/* make a local copy of desc op_tmpl and complete dirmap rdesc
532 	 * spi_mem_op template with offs, len and *buf in  order to get
533 	 * all needed transfer information into struct spi_mem_op
534 	 */
535 	memcpy(&op, &desc->info.op_tmpl, sizeof(struct spi_mem_op));
536 	dev_dbg(qspi->dev, "%s len = 0x%zx offs = 0x%llx buf = 0x%p\n", __func__, len, offs, buf);
537 
538 	op.data.nbytes = len;
539 	op.addr.val = desc->info.offset + offs;
540 	op.data.buf.in = buf;
541 
542 	addr_max = op.addr.val + op.data.nbytes + 1;
543 	if (addr_max < qspi->mm_size && op.addr.buswidth)
544 		qspi->fmode = CCR_FMODE_MM;
545 	else
546 		qspi->fmode = CCR_FMODE_INDR;
547 
548 	ret = stm32_qspi_send(desc->mem->spi, &op);
549 	mutex_unlock(&qspi->lock);
550 
551 	pm_runtime_mark_last_busy(qspi->dev);
552 	pm_runtime_put_autosuspend(qspi->dev);
553 
554 	return ret ?: len;
555 }
556 
557 static int stm32_qspi_transfer_one_message(struct spi_controller *ctrl,
558 					   struct spi_message *msg)
559 {
560 	struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
561 	struct spi_transfer *transfer;
562 	struct spi_device *spi = msg->spi;
563 	struct spi_mem_op op;
564 	int ret = 0;
565 
566 	if (!spi_get_csgpiod(spi, 0))
567 		return -EOPNOTSUPP;
568 
569 	ret = pm_runtime_resume_and_get(qspi->dev);
570 	if (ret < 0)
571 		return ret;
572 
573 	mutex_lock(&qspi->lock);
574 
575 	gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), true);
576 
577 	list_for_each_entry(transfer, &msg->transfers, transfer_list) {
578 		u8 dummy_bytes = 0;
579 
580 		memset(&op, 0, sizeof(op));
581 
582 		dev_dbg(qspi->dev, "tx_buf:%p tx_nbits:%d rx_buf:%p rx_nbits:%d len:%d dummy_data:%d\n",
583 			transfer->tx_buf, transfer->tx_nbits,
584 			transfer->rx_buf, transfer->rx_nbits,
585 			transfer->len, transfer->dummy_data);
586 
587 		/*
588 		 * QSPI hardware supports dummy bytes transfer.
589 		 * If current transfer is dummy byte, merge it with the next
590 		 * transfer in order to take into account QSPI block constraint
591 		 */
592 		if (transfer->dummy_data) {
593 			op.dummy.buswidth = transfer->tx_nbits;
594 			op.dummy.nbytes = transfer->len;
595 			dummy_bytes = transfer->len;
596 
597 			/* if happens, means that message is not correctly built */
598 			if (list_is_last(&transfer->transfer_list, &msg->transfers)) {
599 				ret = -EINVAL;
600 				goto end_of_transfer;
601 			}
602 
603 			transfer = list_next_entry(transfer, transfer_list);
604 		}
605 
606 		op.data.nbytes = transfer->len;
607 
608 		if (transfer->rx_buf) {
609 			qspi->fmode = CCR_FMODE_INDR;
610 			op.data.buswidth = transfer->rx_nbits;
611 			op.data.dir = SPI_MEM_DATA_IN;
612 			op.data.buf.in = transfer->rx_buf;
613 		} else {
614 			qspi->fmode = CCR_FMODE_INDW;
615 			op.data.buswidth = transfer->tx_nbits;
616 			op.data.dir = SPI_MEM_DATA_OUT;
617 			op.data.buf.out = transfer->tx_buf;
618 		}
619 
620 		ret = stm32_qspi_send(spi, &op);
621 		if (ret)
622 			goto end_of_transfer;
623 
624 		msg->actual_length += transfer->len + dummy_bytes;
625 	}
626 
627 end_of_transfer:
628 	gpiod_set_value_cansleep(spi_get_csgpiod(spi, 0), false);
629 
630 	mutex_unlock(&qspi->lock);
631 
632 	msg->status = ret;
633 	spi_finalize_current_message(ctrl);
634 
635 	pm_runtime_mark_last_busy(qspi->dev);
636 	pm_runtime_put_autosuspend(qspi->dev);
637 
638 	return ret;
639 }
640 
641 static int stm32_qspi_setup(struct spi_device *spi)
642 {
643 	struct spi_controller *ctrl = spi->controller;
644 	struct stm32_qspi *qspi = spi_controller_get_devdata(ctrl);
645 	struct stm32_qspi_flash *flash;
646 	u32 presc, mode;
647 	int ret;
648 
649 	if (ctrl->busy)
650 		return -EBUSY;
651 
652 	if (!spi->max_speed_hz)
653 		return -EINVAL;
654 
655 	mode = spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL);
656 	if (mode && gpiod_count(qspi->dev, "cs") == -ENOENT) {
657 		dev_err(qspi->dev, "spi-rx-bus-width\\/spi-tx-bus-width\\/cs-gpios\n");
658 		dev_err(qspi->dev, "configuration not supported\n");
659 
660 		return -EINVAL;
661 	}
662 
663 	ret = pm_runtime_resume_and_get(qspi->dev);
664 	if (ret < 0)
665 		return ret;
666 
667 	presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1;
668 
669 	flash = &qspi->flash[spi_get_chipselect(spi, 0)];
670 	flash->cs = spi_get_chipselect(spi, 0);
671 	flash->presc = presc;
672 
673 	mutex_lock(&qspi->lock);
674 	qspi->cr_reg = CR_APMS | 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN;
675 
676 	/*
677 	 * Dual flash mode is only enable in case SPI_TX_OCTAL or SPI_RX_OCTAL
678 	 * is set in spi->mode and "cs-gpios" properties is found in DT
679 	 */
680 	if (mode) {
681 		qspi->cr_reg |= CR_DFM;
682 		dev_dbg(qspi->dev, "Dual flash mode enable");
683 	}
684 
685 	writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
686 
687 	/* set dcr fsize to max address */
688 	qspi->dcr_reg = DCR_FSIZE_MASK;
689 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
690 	mutex_unlock(&qspi->lock);
691 
692 	pm_runtime_mark_last_busy(qspi->dev);
693 	pm_runtime_put_autosuspend(qspi->dev);
694 
695 	return 0;
696 }
697 
698 static int stm32_qspi_dma_setup(struct stm32_qspi *qspi)
699 {
700 	struct dma_slave_config dma_cfg;
701 	struct device *dev = qspi->dev;
702 	int ret = 0;
703 
704 	memset(&dma_cfg, 0, sizeof(dma_cfg));
705 
706 	dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
707 	dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
708 	dma_cfg.src_addr = qspi->phys_base + QSPI_DR;
709 	dma_cfg.dst_addr = qspi->phys_base + QSPI_DR;
710 	dma_cfg.src_maxburst = 4;
711 	dma_cfg.dst_maxburst = 4;
712 
713 	qspi->dma_chrx = dma_request_chan(dev, "rx");
714 	if (IS_ERR(qspi->dma_chrx)) {
715 		ret = PTR_ERR(qspi->dma_chrx);
716 		qspi->dma_chrx = NULL;
717 		if (ret == -EPROBE_DEFER)
718 			goto out;
719 	} else {
720 		if (dmaengine_slave_config(qspi->dma_chrx, &dma_cfg)) {
721 			dev_err(dev, "dma rx config failed\n");
722 			dma_release_channel(qspi->dma_chrx);
723 			qspi->dma_chrx = NULL;
724 		}
725 	}
726 
727 	qspi->dma_chtx = dma_request_chan(dev, "tx");
728 	if (IS_ERR(qspi->dma_chtx)) {
729 		ret = PTR_ERR(qspi->dma_chtx);
730 		qspi->dma_chtx = NULL;
731 	} else {
732 		if (dmaengine_slave_config(qspi->dma_chtx, &dma_cfg)) {
733 			dev_err(dev, "dma tx config failed\n");
734 			dma_release_channel(qspi->dma_chtx);
735 			qspi->dma_chtx = NULL;
736 		}
737 	}
738 
739 out:
740 	init_completion(&qspi->dma_completion);
741 
742 	if (ret != -EPROBE_DEFER)
743 		ret = 0;
744 
745 	return ret;
746 }
747 
748 static void stm32_qspi_dma_free(struct stm32_qspi *qspi)
749 {
750 	if (qspi->dma_chtx)
751 		dma_release_channel(qspi->dma_chtx);
752 	if (qspi->dma_chrx)
753 		dma_release_channel(qspi->dma_chrx);
754 }
755 
756 /*
757  * no special host constraint, so use default spi_mem_default_supports_op
758  * to check supported mode.
759  */
760 static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
761 	.exec_op	= stm32_qspi_exec_op,
762 	.dirmap_create	= stm32_qspi_dirmap_create,
763 	.dirmap_read	= stm32_qspi_dirmap_read,
764 	.poll_status	= stm32_qspi_poll_status,
765 };
766 
767 static int stm32_qspi_probe(struct platform_device *pdev)
768 {
769 	struct device *dev = &pdev->dev;
770 	struct spi_controller *ctrl;
771 	struct reset_control *rstc;
772 	struct stm32_qspi *qspi;
773 	struct resource *res;
774 	int ret, irq;
775 
776 	ctrl = devm_spi_alloc_host(dev, sizeof(*qspi));
777 	if (!ctrl)
778 		return -ENOMEM;
779 
780 	qspi = spi_controller_get_devdata(ctrl);
781 	qspi->ctrl = ctrl;
782 
783 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi");
784 	qspi->io_base = devm_ioremap_resource(dev, res);
785 	if (IS_ERR(qspi->io_base))
786 		return PTR_ERR(qspi->io_base);
787 
788 	qspi->phys_base = res->start;
789 
790 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm");
791 	qspi->mm_base = devm_ioremap_resource(dev, res);
792 	if (IS_ERR(qspi->mm_base))
793 		return PTR_ERR(qspi->mm_base);
794 
795 	qspi->mm_size = resource_size(res);
796 	if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ)
797 		return -EINVAL;
798 
799 	irq = platform_get_irq(pdev, 0);
800 	if (irq < 0)
801 		return irq;
802 
803 	ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0,
804 			       dev_name(dev), qspi);
805 	if (ret) {
806 		dev_err(dev, "failed to request irq\n");
807 		return ret;
808 	}
809 
810 	init_completion(&qspi->data_completion);
811 	init_completion(&qspi->match_completion);
812 
813 	qspi->clk = devm_clk_get(dev, NULL);
814 	if (IS_ERR(qspi->clk))
815 		return PTR_ERR(qspi->clk);
816 
817 	qspi->clk_rate = clk_get_rate(qspi->clk);
818 	if (!qspi->clk_rate)
819 		return -EINVAL;
820 
821 	ret = clk_prepare_enable(qspi->clk);
822 	if (ret) {
823 		dev_err(dev, "can not enable the clock\n");
824 		return ret;
825 	}
826 
827 	rstc = devm_reset_control_get_exclusive(dev, NULL);
828 	if (IS_ERR(rstc)) {
829 		ret = PTR_ERR(rstc);
830 		if (ret == -EPROBE_DEFER)
831 			goto err_clk_disable;
832 	} else {
833 		reset_control_assert(rstc);
834 		udelay(2);
835 		reset_control_deassert(rstc);
836 	}
837 
838 	qspi->dev = dev;
839 	platform_set_drvdata(pdev, qspi);
840 	ret = stm32_qspi_dma_setup(qspi);
841 	if (ret)
842 		goto err_dma_free;
843 
844 	mutex_init(&qspi->lock);
845 
846 	ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_OCTAL
847 		| SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_OCTAL;
848 	ctrl->setup = stm32_qspi_setup;
849 	ctrl->bus_num = -1;
850 	ctrl->mem_ops = &stm32_qspi_mem_ops;
851 	ctrl->use_gpio_descriptors = true;
852 	ctrl->transfer_one_message = stm32_qspi_transfer_one_message;
853 	ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
854 	ctrl->dev.of_node = dev->of_node;
855 
856 	pm_runtime_set_autosuspend_delay(dev, STM32_AUTOSUSPEND_DELAY);
857 	pm_runtime_use_autosuspend(dev);
858 	pm_runtime_set_active(dev);
859 	pm_runtime_enable(dev);
860 	pm_runtime_get_noresume(dev);
861 
862 	ret = spi_register_controller(ctrl);
863 	if (ret)
864 		goto err_pm_runtime_free;
865 
866 	pm_runtime_mark_last_busy(dev);
867 	pm_runtime_put_autosuspend(dev);
868 
869 	return 0;
870 
871 err_pm_runtime_free:
872 	pm_runtime_get_sync(qspi->dev);
873 	/* disable qspi */
874 	writel_relaxed(0, qspi->io_base + QSPI_CR);
875 	mutex_destroy(&qspi->lock);
876 	pm_runtime_put_noidle(qspi->dev);
877 	pm_runtime_disable(qspi->dev);
878 	pm_runtime_set_suspended(qspi->dev);
879 	pm_runtime_dont_use_autosuspend(qspi->dev);
880 err_dma_free:
881 	stm32_qspi_dma_free(qspi);
882 err_clk_disable:
883 	clk_disable_unprepare(qspi->clk);
884 
885 	return ret;
886 }
887 
888 static void stm32_qspi_remove(struct platform_device *pdev)
889 {
890 	struct stm32_qspi *qspi = platform_get_drvdata(pdev);
891 
892 	pm_runtime_get_sync(qspi->dev);
893 	spi_unregister_controller(qspi->ctrl);
894 	/* disable qspi */
895 	writel_relaxed(0, qspi->io_base + QSPI_CR);
896 	stm32_qspi_dma_free(qspi);
897 	mutex_destroy(&qspi->lock);
898 	pm_runtime_put_noidle(qspi->dev);
899 	pm_runtime_disable(qspi->dev);
900 	pm_runtime_set_suspended(qspi->dev);
901 	pm_runtime_dont_use_autosuspend(qspi->dev);
902 	clk_disable_unprepare(qspi->clk);
903 }
904 
905 static int __maybe_unused stm32_qspi_runtime_suspend(struct device *dev)
906 {
907 	struct stm32_qspi *qspi = dev_get_drvdata(dev);
908 
909 	clk_disable_unprepare(qspi->clk);
910 
911 	return 0;
912 }
913 
914 static int __maybe_unused stm32_qspi_runtime_resume(struct device *dev)
915 {
916 	struct stm32_qspi *qspi = dev_get_drvdata(dev);
917 
918 	return clk_prepare_enable(qspi->clk);
919 }
920 
921 static int __maybe_unused stm32_qspi_suspend(struct device *dev)
922 {
923 	pinctrl_pm_select_sleep_state(dev);
924 
925 	return pm_runtime_force_suspend(dev);
926 }
927 
928 static int __maybe_unused stm32_qspi_resume(struct device *dev)
929 {
930 	struct stm32_qspi *qspi = dev_get_drvdata(dev);
931 	int ret;
932 
933 	ret = pm_runtime_force_resume(dev);
934 	if (ret < 0)
935 		return ret;
936 
937 	pinctrl_pm_select_default_state(dev);
938 
939 	ret = pm_runtime_resume_and_get(dev);
940 	if (ret < 0)
941 		return ret;
942 
943 	writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
944 	writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR);
945 
946 	pm_runtime_mark_last_busy(dev);
947 	pm_runtime_put_autosuspend(dev);
948 
949 	return 0;
950 }
951 
952 static const struct dev_pm_ops stm32_qspi_pm_ops = {
953 	SET_RUNTIME_PM_OPS(stm32_qspi_runtime_suspend,
954 			   stm32_qspi_runtime_resume, NULL)
955 	SET_SYSTEM_SLEEP_PM_OPS(stm32_qspi_suspend, stm32_qspi_resume)
956 };
957 
958 static const struct of_device_id stm32_qspi_match[] = {
959 	{.compatible = "st,stm32f469-qspi"},
960 	{}
961 };
962 MODULE_DEVICE_TABLE(of, stm32_qspi_match);
963 
964 static struct platform_driver stm32_qspi_driver = {
965 	.probe	= stm32_qspi_probe,
966 	.remove_new = stm32_qspi_remove,
967 	.driver	= {
968 		.name = "stm32-qspi",
969 		.of_match_table = stm32_qspi_match,
970 		.pm = &stm32_qspi_pm_ops,
971 	},
972 };
973 module_platform_driver(stm32_qspi_driver);
974 
975 MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>");
976 MODULE_DESCRIPTION("STMicroelectronics STM32 quad spi driver");
977 MODULE_LICENSE("GPL v2");
978