1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Marvell Orion SPI controller driver 4 * 5 * Author: Shadi Ammouri <shadi@marvell.com> 6 * Copyright (C) 2007-2008 Marvell Ltd. 7 */ 8 9 #include <linux/interrupt.h> 10 #include <linux/delay.h> 11 #include <linux/platform_device.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/spi/spi.h> 15 #include <linux/module.h> 16 #include <linux/pm_runtime.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/clk.h> 20 #include <linux/sizes.h> 21 #include <asm/unaligned.h> 22 23 #define DRIVER_NAME "orion_spi" 24 25 /* Runtime PM autosuspend timeout: PM is fairly light on this driver */ 26 #define SPI_AUTOSUSPEND_TIMEOUT 200 27 28 /* Some SoCs using this driver support up to 8 chip selects. 29 * It is up to the implementer to only use the chip selects 30 * that are available. 31 */ 32 #define ORION_NUM_CHIPSELECTS 8 33 34 #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ 35 36 #define ORION_SPI_IF_CTRL_REG 0x00 37 #define ORION_SPI_IF_CONFIG_REG 0x04 38 #define ORION_SPI_IF_RXLSBF BIT(14) 39 #define ORION_SPI_IF_TXLSBF BIT(13) 40 #define ORION_SPI_DATA_OUT_REG 0x08 41 #define ORION_SPI_DATA_IN_REG 0x0c 42 #define ORION_SPI_INT_CAUSE_REG 0x10 43 #define ORION_SPI_TIMING_PARAMS_REG 0x18 44 45 /* Register for the "Direct Mode" */ 46 #define SPI_DIRECT_WRITE_CONFIG_REG 0x20 47 48 #define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6) 49 #define ORION_SPI_TMISO_SAMPLE_1 (1 << 6) 50 #define ORION_SPI_TMISO_SAMPLE_2 (2 << 6) 51 52 #define ORION_SPI_MODE_CPOL (1 << 11) 53 #define ORION_SPI_MODE_CPHA (1 << 12) 54 #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) 55 #define ORION_SPI_CLK_PRESCALE_MASK 0x1F 56 #define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF 57 #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ 58 ORION_SPI_MODE_CPHA) 59 #define ORION_SPI_CS_MASK 0x1C 60 #define ORION_SPI_CS_SHIFT 2 61 #define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \ 62 ORION_SPI_CS_MASK) 63 64 enum orion_spi_type { 65 ORION_SPI, 66 ARMADA_SPI, 67 }; 68 69 struct orion_spi_dev { 70 enum orion_spi_type typ; 71 /* 72 * min_divisor and max_hz should be exclusive, the only we can 73 * have both is for managing the armada-370-spi case with old 74 * device tree 75 */ 76 unsigned long max_hz; 77 unsigned int min_divisor; 78 unsigned int max_divisor; 79 u32 prescale_mask; 80 bool is_errata_50mhz_ac; 81 }; 82 83 struct orion_direct_acc { 84 void __iomem *vaddr; 85 u32 size; 86 }; 87 88 struct orion_child_options { 89 struct orion_direct_acc direct_access; 90 }; 91 92 struct orion_spi { 93 struct spi_controller *host; 94 void __iomem *base; 95 struct clk *clk; 96 struct clk *axi_clk; 97 const struct orion_spi_dev *devdata; 98 struct device *dev; 99 100 struct orion_child_options child[ORION_NUM_CHIPSELECTS]; 101 }; 102 103 #ifdef CONFIG_PM 104 static int orion_spi_runtime_suspend(struct device *dev); 105 static int orion_spi_runtime_resume(struct device *dev); 106 #endif 107 108 static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) 109 { 110 return orion_spi->base + reg; 111 } 112 113 static inline void 114 orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 115 { 116 void __iomem *reg_addr = spi_reg(orion_spi, reg); 117 u32 val; 118 119 val = readl(reg_addr); 120 val |= mask; 121 writel(val, reg_addr); 122 } 123 124 static inline void 125 orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 126 { 127 void __iomem *reg_addr = spi_reg(orion_spi, reg); 128 u32 val; 129 130 val = readl(reg_addr); 131 val &= ~mask; 132 writel(val, reg_addr); 133 } 134 135 static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) 136 { 137 u32 tclk_hz; 138 u32 rate; 139 u32 prescale; 140 u32 reg; 141 struct orion_spi *orion_spi; 142 const struct orion_spi_dev *devdata; 143 144 orion_spi = spi_controller_get_devdata(spi->controller); 145 devdata = orion_spi->devdata; 146 147 tclk_hz = clk_get_rate(orion_spi->clk); 148 149 if (devdata->typ == ARMADA_SPI) { 150 /* 151 * Given the core_clk (tclk_hz) and the target rate (speed) we 152 * determine the best values for SPR (in [0 .. 15]) and SPPR (in 153 * [0..7]) such that 154 * 155 * core_clk / (SPR * 2 ** SPPR) 156 * 157 * is as big as possible but not bigger than speed. 158 */ 159 160 /* best integer divider: */ 161 unsigned divider = DIV_ROUND_UP(tclk_hz, speed); 162 unsigned spr, sppr; 163 164 if (divider < 16) { 165 /* This is the easy case, divider is less than 16 */ 166 spr = divider; 167 sppr = 0; 168 169 } else { 170 unsigned two_pow_sppr; 171 /* 172 * Find the highest bit set in divider. This and the 173 * three next bits define SPR (apart from rounding). 174 * SPPR is then the number of zero bits that must be 175 * appended: 176 */ 177 sppr = fls(divider) - 4; 178 179 /* 180 * As SPR only has 4 bits, we have to round divider up 181 * to the next multiple of 2 ** sppr. 182 */ 183 two_pow_sppr = 1 << sppr; 184 divider = (divider + two_pow_sppr - 1) & -two_pow_sppr; 185 186 /* 187 * recalculate sppr as rounding up divider might have 188 * increased it enough to change the position of the 189 * highest set bit. In this case the bit that now 190 * doesn't make it into SPR is 0, so there is no need to 191 * round again. 192 */ 193 sppr = fls(divider) - 4; 194 spr = divider >> sppr; 195 196 /* 197 * Now do range checking. SPR is constructed to have a 198 * width of 4 bits, so this is fine for sure. So we 199 * still need to check for sppr to fit into 3 bits: 200 */ 201 if (sppr > 7) 202 return -EINVAL; 203 } 204 205 prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr; 206 } else { 207 /* 208 * the supported rates are: 4,6,8...30 209 * round up as we look for equal or less speed 210 */ 211 rate = DIV_ROUND_UP(tclk_hz, speed); 212 rate = roundup(rate, 2); 213 214 /* check if requested speed is too small */ 215 if (rate > 30) 216 return -EINVAL; 217 218 if (rate < 4) 219 rate = 4; 220 221 /* Convert the rate to SPI clock divisor value. */ 222 prescale = 0x10 + rate/2; 223 } 224 225 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 226 reg = ((reg & ~devdata->prescale_mask) | prescale); 227 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 228 229 return 0; 230 } 231 232 static void 233 orion_spi_mode_set(struct spi_device *spi) 234 { 235 u32 reg; 236 struct orion_spi *orion_spi; 237 238 orion_spi = spi_controller_get_devdata(spi->controller); 239 240 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 241 reg &= ~ORION_SPI_MODE_MASK; 242 if (spi->mode & SPI_CPOL) 243 reg |= ORION_SPI_MODE_CPOL; 244 if (spi->mode & SPI_CPHA) 245 reg |= ORION_SPI_MODE_CPHA; 246 if (spi->mode & SPI_LSB_FIRST) 247 reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF; 248 else 249 reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF); 250 251 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 252 } 253 254 static void 255 orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed) 256 { 257 u32 reg; 258 struct orion_spi *orion_spi; 259 260 orion_spi = spi_controller_get_devdata(spi->controller); 261 262 /* 263 * Erratum description: (Erratum NO. FE-9144572) The device 264 * SPI interface supports frequencies of up to 50 MHz. 265 * However, due to this erratum, when the device core clock is 266 * 250 MHz and the SPI interfaces is configured for 50MHz SPI 267 * clock and CPOL=CPHA=1 there might occur data corruption on 268 * reads from the SPI device. 269 * Erratum Workaround: 270 * Work in one of the following configurations: 271 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration 272 * Register". 273 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1 274 * Register" before setting the interface. 275 */ 276 reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 277 reg &= ~ORION_SPI_TMISO_SAMPLE_MASK; 278 279 if (clk_get_rate(orion_spi->clk) == 250000000 && 280 speed == 50000000 && spi->mode & SPI_CPOL && 281 spi->mode & SPI_CPHA) 282 reg |= ORION_SPI_TMISO_SAMPLE_2; 283 else 284 reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */ 285 286 writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 287 } 288 289 /* 290 * called only when no transfer is active on the bus 291 */ 292 static int 293 orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) 294 { 295 struct orion_spi *orion_spi; 296 unsigned int speed = spi->max_speed_hz; 297 unsigned int bits_per_word = spi->bits_per_word; 298 int rc; 299 300 orion_spi = spi_controller_get_devdata(spi->controller); 301 302 if ((t != NULL) && t->speed_hz) 303 speed = t->speed_hz; 304 305 if ((t != NULL) && t->bits_per_word) 306 bits_per_word = t->bits_per_word; 307 308 orion_spi_mode_set(spi); 309 310 if (orion_spi->devdata->is_errata_50mhz_ac) 311 orion_spi_50mhz_ac_timing_erratum(spi, speed); 312 313 rc = orion_spi_baudrate_set(spi, speed); 314 if (rc) 315 return rc; 316 317 if (bits_per_word == 16) 318 orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 319 ORION_SPI_IF_8_16_BIT_MODE); 320 else 321 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 322 ORION_SPI_IF_8_16_BIT_MODE); 323 324 return 0; 325 } 326 327 static void orion_spi_set_cs(struct spi_device *spi, bool enable) 328 { 329 struct orion_spi *orion_spi; 330 void __iomem *ctrl_reg; 331 u32 val; 332 333 orion_spi = spi_controller_get_devdata(spi->controller); 334 ctrl_reg = spi_reg(orion_spi, ORION_SPI_IF_CTRL_REG); 335 336 val = readl(ctrl_reg); 337 338 /* Clear existing chip-select and assertion state */ 339 val &= ~(ORION_SPI_CS_MASK | 0x1); 340 341 /* 342 * If this line is using a GPIO to control chip select, this internal 343 * .set_cs() function will still be called, so we clear any previous 344 * chip select. The CS we activate will not have any elecrical effect, 345 * as it is handled by a GPIO, but that doesn't matter. What we need 346 * is to deassert the old chip select and assert some other chip select. 347 */ 348 val |= ORION_SPI_CS(spi_get_chipselect(spi, 0)); 349 350 /* 351 * Chip select logic is inverted from spi_set_cs(). For lines using a 352 * GPIO to do chip select SPI_CS_HIGH is enforced and inversion happens 353 * in the GPIO library, but we don't care about that, because in those 354 * cases we are dealing with an unused native CS anyways so the polarity 355 * doesn't matter. 356 */ 357 if (!enable) 358 val |= 0x1; 359 360 /* 361 * To avoid toggling unwanted chip selects update the register 362 * with a single write. 363 */ 364 writel(val, ctrl_reg); 365 } 366 367 static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) 368 { 369 int i; 370 371 for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { 372 if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) 373 return 1; 374 375 udelay(1); 376 } 377 378 return -1; 379 } 380 381 static inline int 382 orion_spi_write_read_8bit(struct spi_device *spi, 383 const u8 **tx_buf, u8 **rx_buf) 384 { 385 void __iomem *tx_reg, *rx_reg, *int_reg; 386 struct orion_spi *orion_spi; 387 bool cs_single_byte; 388 389 cs_single_byte = spi->mode & SPI_CS_WORD; 390 391 orion_spi = spi_controller_get_devdata(spi->controller); 392 393 if (cs_single_byte) 394 orion_spi_set_cs(spi, 0); 395 396 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 397 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 398 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 399 400 /* clear the interrupt cause register */ 401 writel(0x0, int_reg); 402 403 if (tx_buf && *tx_buf) 404 writel(*(*tx_buf)++, tx_reg); 405 else 406 writel(0, tx_reg); 407 408 if (orion_spi_wait_till_ready(orion_spi) < 0) { 409 if (cs_single_byte) { 410 orion_spi_set_cs(spi, 1); 411 /* Satisfy some SLIC devices requirements */ 412 udelay(4); 413 } 414 dev_err(&spi->dev, "TXS timed out\n"); 415 return -1; 416 } 417 418 if (rx_buf && *rx_buf) 419 *(*rx_buf)++ = readl(rx_reg); 420 421 if (cs_single_byte) { 422 orion_spi_set_cs(spi, 1); 423 /* Satisfy some SLIC devices requirements */ 424 udelay(4); 425 } 426 427 return 1; 428 } 429 430 static inline int 431 orion_spi_write_read_16bit(struct spi_device *spi, 432 const u16 **tx_buf, u16 **rx_buf) 433 { 434 void __iomem *tx_reg, *rx_reg, *int_reg; 435 struct orion_spi *orion_spi; 436 437 if (spi->mode & SPI_CS_WORD) { 438 dev_err(&spi->dev, "SPI_CS_WORD is only supported for 8 bit words\n"); 439 return -1; 440 } 441 442 orion_spi = spi_controller_get_devdata(spi->controller); 443 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 444 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 445 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 446 447 /* clear the interrupt cause register */ 448 writel(0x0, int_reg); 449 450 if (tx_buf && *tx_buf) 451 writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); 452 else 453 writel(0, tx_reg); 454 455 if (orion_spi_wait_till_ready(orion_spi) < 0) { 456 dev_err(&spi->dev, "TXS timed out\n"); 457 return -1; 458 } 459 460 if (rx_buf && *rx_buf) 461 put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); 462 463 return 1; 464 } 465 466 static unsigned int 467 orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) 468 { 469 unsigned int count; 470 int word_len; 471 struct orion_spi *orion_spi; 472 int cs = spi_get_chipselect(spi, 0); 473 void __iomem *vaddr; 474 475 word_len = spi->bits_per_word; 476 count = xfer->len; 477 478 orion_spi = spi_controller_get_devdata(spi->controller); 479 480 /* 481 * Use SPI direct write mode if base address is available 482 * and SPI_CS_WORD flag is not set. 483 * Otherwise fall back to PIO mode for this transfer. 484 */ 485 vaddr = orion_spi->child[cs].direct_access.vaddr; 486 487 if (vaddr && xfer->tx_buf && word_len == 8 && (spi->mode & SPI_CS_WORD) == 0) { 488 unsigned int cnt = count / 4; 489 unsigned int rem = count % 4; 490 491 /* 492 * Send the TX-data to the SPI device via the direct 493 * mapped address window 494 */ 495 iowrite32_rep(vaddr, xfer->tx_buf, cnt); 496 if (rem) { 497 u32 *buf = (u32 *)xfer->tx_buf; 498 499 iowrite8_rep(vaddr, &buf[cnt], rem); 500 } 501 502 return count; 503 } 504 505 if (word_len == 8) { 506 const u8 *tx = xfer->tx_buf; 507 u8 *rx = xfer->rx_buf; 508 509 do { 510 if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) 511 goto out; 512 count--; 513 spi_delay_exec(&xfer->word_delay, xfer); 514 } while (count); 515 } else if (word_len == 16) { 516 const u16 *tx = xfer->tx_buf; 517 u16 *rx = xfer->rx_buf; 518 519 do { 520 if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) 521 goto out; 522 count -= 2; 523 spi_delay_exec(&xfer->word_delay, xfer); 524 } while (count); 525 } 526 527 out: 528 return xfer->len - count; 529 } 530 531 static int orion_spi_transfer_one(struct spi_controller *host, 532 struct spi_device *spi, 533 struct spi_transfer *t) 534 { 535 int status = 0; 536 537 status = orion_spi_setup_transfer(spi, t); 538 if (status < 0) 539 return status; 540 541 if (t->len) 542 orion_spi_write_read(spi, t); 543 544 return status; 545 } 546 547 static int orion_spi_setup(struct spi_device *spi) 548 { 549 int ret; 550 #ifdef CONFIG_PM 551 struct orion_spi *orion_spi = spi_controller_get_devdata(spi->controller); 552 struct device *dev = orion_spi->dev; 553 554 orion_spi_runtime_resume(dev); 555 #endif 556 557 ret = orion_spi_setup_transfer(spi, NULL); 558 559 #ifdef CONFIG_PM 560 orion_spi_runtime_suspend(dev); 561 #endif 562 563 return ret; 564 } 565 566 static int orion_spi_reset(struct orion_spi *orion_spi) 567 { 568 /* Verify that the CS is deasserted */ 569 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 570 571 /* Don't deassert CS between the direct mapped SPI transfers */ 572 writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG)); 573 574 return 0; 575 } 576 577 static const struct orion_spi_dev orion_spi_dev_data = { 578 .typ = ORION_SPI, 579 .min_divisor = 4, 580 .max_divisor = 30, 581 .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, 582 }; 583 584 static const struct orion_spi_dev armada_370_spi_dev_data = { 585 .typ = ARMADA_SPI, 586 .min_divisor = 4, 587 .max_divisor = 1920, 588 .max_hz = 50000000, 589 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 590 }; 591 592 static const struct orion_spi_dev armada_xp_spi_dev_data = { 593 .typ = ARMADA_SPI, 594 .max_hz = 50000000, 595 .max_divisor = 1920, 596 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 597 }; 598 599 static const struct orion_spi_dev armada_375_spi_dev_data = { 600 .typ = ARMADA_SPI, 601 .min_divisor = 15, 602 .max_divisor = 1920, 603 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 604 }; 605 606 static const struct orion_spi_dev armada_380_spi_dev_data = { 607 .typ = ARMADA_SPI, 608 .max_hz = 50000000, 609 .max_divisor = 1920, 610 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 611 .is_errata_50mhz_ac = true, 612 }; 613 614 static const struct of_device_id orion_spi_of_match_table[] = { 615 { 616 .compatible = "marvell,orion-spi", 617 .data = &orion_spi_dev_data, 618 }, 619 { 620 .compatible = "marvell,armada-370-spi", 621 .data = &armada_370_spi_dev_data, 622 }, 623 { 624 .compatible = "marvell,armada-375-spi", 625 .data = &armada_375_spi_dev_data, 626 }, 627 { 628 .compatible = "marvell,armada-380-spi", 629 .data = &armada_380_spi_dev_data, 630 }, 631 { 632 .compatible = "marvell,armada-390-spi", 633 .data = &armada_xp_spi_dev_data, 634 }, 635 { 636 .compatible = "marvell,armada-xp-spi", 637 .data = &armada_xp_spi_dev_data, 638 }, 639 640 {} 641 }; 642 MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); 643 644 static int orion_spi_probe(struct platform_device *pdev) 645 { 646 const struct orion_spi_dev *devdata; 647 struct spi_controller *host; 648 struct orion_spi *spi; 649 struct resource *r; 650 unsigned long tclk_hz; 651 int status = 0; 652 struct device_node *np; 653 654 host = spi_alloc_host(&pdev->dev, sizeof(*spi)); 655 if (host == NULL) { 656 dev_dbg(&pdev->dev, "host allocation failed\n"); 657 return -ENOMEM; 658 } 659 660 if (pdev->id != -1) 661 host->bus_num = pdev->id; 662 if (pdev->dev.of_node) { 663 u32 cell_index; 664 665 if (!of_property_read_u32(pdev->dev.of_node, "cell-index", 666 &cell_index)) 667 host->bus_num = cell_index; 668 } 669 670 /* we support all 4 SPI modes and LSB first option */ 671 host->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST | SPI_CS_WORD; 672 host->set_cs = orion_spi_set_cs; 673 host->transfer_one = orion_spi_transfer_one; 674 host->num_chipselect = ORION_NUM_CHIPSELECTS; 675 host->setup = orion_spi_setup; 676 host->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); 677 host->auto_runtime_pm = true; 678 host->use_gpio_descriptors = true; 679 host->flags = SPI_CONTROLLER_GPIO_SS; 680 681 platform_set_drvdata(pdev, host); 682 683 spi = spi_controller_get_devdata(host); 684 spi->host = host; 685 spi->dev = &pdev->dev; 686 687 devdata = device_get_match_data(&pdev->dev); 688 devdata = devdata ? devdata : &orion_spi_dev_data; 689 spi->devdata = devdata; 690 691 spi->clk = devm_clk_get_enabled(&pdev->dev, NULL); 692 if (IS_ERR(spi->clk)) { 693 status = PTR_ERR(spi->clk); 694 goto out; 695 } 696 697 /* The following clock is only used by some SoCs */ 698 spi->axi_clk = devm_clk_get(&pdev->dev, "axi"); 699 if (PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) { 700 status = -EPROBE_DEFER; 701 goto out; 702 } 703 if (!IS_ERR(spi->axi_clk)) 704 clk_prepare_enable(spi->axi_clk); 705 706 tclk_hz = clk_get_rate(spi->clk); 707 708 /* 709 * With old device tree, armada-370-spi could be used with 710 * Armada XP, however for this SoC the maximum frequency is 711 * 50MHz instead of tclk/4. On Armada 370, tclk cannot be 712 * higher than 200MHz. So, in order to be able to handle both 713 * SoCs, we can take the minimum of 50MHz and tclk/4. 714 */ 715 if (of_device_is_compatible(pdev->dev.of_node, 716 "marvell,armada-370-spi")) 717 host->max_speed_hz = min(devdata->max_hz, 718 DIV_ROUND_UP(tclk_hz, devdata->min_divisor)); 719 else if (devdata->min_divisor) 720 host->max_speed_hz = 721 DIV_ROUND_UP(tclk_hz, devdata->min_divisor); 722 else 723 host->max_speed_hz = devdata->max_hz; 724 host->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); 725 726 spi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r); 727 if (IS_ERR(spi->base)) { 728 status = PTR_ERR(spi->base); 729 goto out_rel_axi_clk; 730 } 731 732 for_each_available_child_of_node(pdev->dev.of_node, np) { 733 struct orion_direct_acc *dir_acc; 734 u32 cs; 735 736 /* Get chip-select number from the "reg" property */ 737 status = of_property_read_u32(np, "reg", &cs); 738 if (status) { 739 dev_err(&pdev->dev, 740 "%pOF has no valid 'reg' property (%d)\n", 741 np, status); 742 continue; 743 } 744 745 /* 746 * Check if an address is configured for this SPI device. If 747 * not, the MBus mapping via the 'ranges' property in the 'soc' 748 * node is not configured and this device should not use the 749 * direct mode. In this case, just continue with the next 750 * device. 751 */ 752 status = of_address_to_resource(pdev->dev.of_node, cs + 1, r); 753 if (status) 754 continue; 755 756 /* 757 * Only map one page for direct access. This is enough for the 758 * simple TX transfer which only writes to the first word. 759 * This needs to get extended for the direct SPI NOR / SPI NAND 760 * support, once this gets implemented. 761 */ 762 dir_acc = &spi->child[cs].direct_access; 763 dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE); 764 if (!dir_acc->vaddr) { 765 status = -ENOMEM; 766 of_node_put(np); 767 goto out_rel_axi_clk; 768 } 769 dir_acc->size = PAGE_SIZE; 770 771 dev_info(&pdev->dev, "CS%d configured for direct access\n", cs); 772 } 773 774 pm_runtime_set_active(&pdev->dev); 775 pm_runtime_use_autosuspend(&pdev->dev); 776 pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); 777 pm_runtime_enable(&pdev->dev); 778 779 status = orion_spi_reset(spi); 780 if (status < 0) 781 goto out_rel_pm; 782 783 host->dev.of_node = pdev->dev.of_node; 784 status = spi_register_controller(host); 785 if (status < 0) 786 goto out_rel_pm; 787 788 return status; 789 790 out_rel_pm: 791 pm_runtime_disable(&pdev->dev); 792 out_rel_axi_clk: 793 clk_disable_unprepare(spi->axi_clk); 794 out: 795 spi_controller_put(host); 796 return status; 797 } 798 799 800 static void orion_spi_remove(struct platform_device *pdev) 801 { 802 struct spi_controller *host = platform_get_drvdata(pdev); 803 struct orion_spi *spi = spi_controller_get_devdata(host); 804 805 pm_runtime_get_sync(&pdev->dev); 806 clk_disable_unprepare(spi->axi_clk); 807 808 spi_unregister_controller(host); 809 pm_runtime_disable(&pdev->dev); 810 } 811 812 MODULE_ALIAS("platform:" DRIVER_NAME); 813 814 #ifdef CONFIG_PM 815 static int orion_spi_runtime_suspend(struct device *dev) 816 { 817 struct spi_controller *host = dev_get_drvdata(dev); 818 struct orion_spi *spi = spi_controller_get_devdata(host); 819 820 clk_disable_unprepare(spi->axi_clk); 821 clk_disable_unprepare(spi->clk); 822 return 0; 823 } 824 825 static int orion_spi_runtime_resume(struct device *dev) 826 { 827 struct spi_controller *host = dev_get_drvdata(dev); 828 struct orion_spi *spi = spi_controller_get_devdata(host); 829 830 if (!IS_ERR(spi->axi_clk)) 831 clk_prepare_enable(spi->axi_clk); 832 return clk_prepare_enable(spi->clk); 833 } 834 #endif 835 836 static const struct dev_pm_ops orion_spi_pm_ops = { 837 SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend, 838 orion_spi_runtime_resume, 839 NULL) 840 }; 841 842 static struct platform_driver orion_spi_driver = { 843 .driver = { 844 .name = DRIVER_NAME, 845 .pm = &orion_spi_pm_ops, 846 .of_match_table = of_match_ptr(orion_spi_of_match_table), 847 }, 848 .probe = orion_spi_probe, 849 .remove_new = orion_spi_remove, 850 }; 851 852 module_platform_driver(orion_spi_driver); 853 854 MODULE_DESCRIPTION("Orion SPI driver"); 855 MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); 856 MODULE_LICENSE("GPL"); 857