1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Marvell Orion SPI controller driver 4 * 5 * Author: Shadi Ammouri <shadi@marvell.com> 6 * Copyright (C) 2007-2008 Marvell Ltd. 7 */ 8 9 #include <linux/interrupt.h> 10 #include <linux/delay.h> 11 #include <linux/platform_device.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/spi/spi.h> 15 #include <linux/module.h> 16 #include <linux/pm_runtime.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <linux/of_device.h> 20 #include <linux/of_gpio.h> 21 #include <linux/clk.h> 22 #include <linux/sizes.h> 23 #include <linux/gpio.h> 24 #include <asm/unaligned.h> 25 26 #define DRIVER_NAME "orion_spi" 27 28 /* Runtime PM autosuspend timeout: PM is fairly light on this driver */ 29 #define SPI_AUTOSUSPEND_TIMEOUT 200 30 31 /* Some SoCs using this driver support up to 8 chip selects. 32 * It is up to the implementer to only use the chip selects 33 * that are available. 34 */ 35 #define ORION_NUM_CHIPSELECTS 8 36 37 #define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ 38 39 #define ORION_SPI_IF_CTRL_REG 0x00 40 #define ORION_SPI_IF_CONFIG_REG 0x04 41 #define ORION_SPI_IF_RXLSBF BIT(14) 42 #define ORION_SPI_IF_TXLSBF BIT(13) 43 #define ORION_SPI_DATA_OUT_REG 0x08 44 #define ORION_SPI_DATA_IN_REG 0x0c 45 #define ORION_SPI_INT_CAUSE_REG 0x10 46 #define ORION_SPI_TIMING_PARAMS_REG 0x18 47 48 /* Register for the "Direct Mode" */ 49 #define SPI_DIRECT_WRITE_CONFIG_REG 0x20 50 51 #define ORION_SPI_TMISO_SAMPLE_MASK (0x3 << 6) 52 #define ORION_SPI_TMISO_SAMPLE_1 (1 << 6) 53 #define ORION_SPI_TMISO_SAMPLE_2 (2 << 6) 54 55 #define ORION_SPI_MODE_CPOL (1 << 11) 56 #define ORION_SPI_MODE_CPHA (1 << 12) 57 #define ORION_SPI_IF_8_16_BIT_MODE (1 << 5) 58 #define ORION_SPI_CLK_PRESCALE_MASK 0x1F 59 #define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF 60 #define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \ 61 ORION_SPI_MODE_CPHA) 62 #define ORION_SPI_CS_MASK 0x1C 63 #define ORION_SPI_CS_SHIFT 2 64 #define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \ 65 ORION_SPI_CS_MASK) 66 67 enum orion_spi_type { 68 ORION_SPI, 69 ARMADA_SPI, 70 }; 71 72 struct orion_spi_dev { 73 enum orion_spi_type typ; 74 /* 75 * min_divisor and max_hz should be exclusive, the only we can 76 * have both is for managing the armada-370-spi case with old 77 * device tree 78 */ 79 unsigned long max_hz; 80 unsigned int min_divisor; 81 unsigned int max_divisor; 82 u32 prescale_mask; 83 bool is_errata_50mhz_ac; 84 }; 85 86 struct orion_direct_acc { 87 void __iomem *vaddr; 88 u32 size; 89 }; 90 91 struct orion_child_options { 92 struct orion_direct_acc direct_access; 93 }; 94 95 struct orion_spi { 96 struct spi_master *master; 97 void __iomem *base; 98 struct clk *clk; 99 struct clk *axi_clk; 100 const struct orion_spi_dev *devdata; 101 int unused_hw_gpio; 102 103 struct orion_child_options child[ORION_NUM_CHIPSELECTS]; 104 }; 105 106 static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg) 107 { 108 return orion_spi->base + reg; 109 } 110 111 static inline void 112 orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 113 { 114 void __iomem *reg_addr = spi_reg(orion_spi, reg); 115 u32 val; 116 117 val = readl(reg_addr); 118 val |= mask; 119 writel(val, reg_addr); 120 } 121 122 static inline void 123 orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask) 124 { 125 void __iomem *reg_addr = spi_reg(orion_spi, reg); 126 u32 val; 127 128 val = readl(reg_addr); 129 val &= ~mask; 130 writel(val, reg_addr); 131 } 132 133 static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed) 134 { 135 u32 tclk_hz; 136 u32 rate; 137 u32 prescale; 138 u32 reg; 139 struct orion_spi *orion_spi; 140 const struct orion_spi_dev *devdata; 141 142 orion_spi = spi_master_get_devdata(spi->master); 143 devdata = orion_spi->devdata; 144 145 tclk_hz = clk_get_rate(orion_spi->clk); 146 147 if (devdata->typ == ARMADA_SPI) { 148 /* 149 * Given the core_clk (tclk_hz) and the target rate (speed) we 150 * determine the best values for SPR (in [0 .. 15]) and SPPR (in 151 * [0..7]) such that 152 * 153 * core_clk / (SPR * 2 ** SPPR) 154 * 155 * is as big as possible but not bigger than speed. 156 */ 157 158 /* best integer divider: */ 159 unsigned divider = DIV_ROUND_UP(tclk_hz, speed); 160 unsigned spr, sppr; 161 162 if (divider < 16) { 163 /* This is the easy case, divider is less than 16 */ 164 spr = divider; 165 sppr = 0; 166 167 } else { 168 unsigned two_pow_sppr; 169 /* 170 * Find the highest bit set in divider. This and the 171 * three next bits define SPR (apart from rounding). 172 * SPPR is then the number of zero bits that must be 173 * appended: 174 */ 175 sppr = fls(divider) - 4; 176 177 /* 178 * As SPR only has 4 bits, we have to round divider up 179 * to the next multiple of 2 ** sppr. 180 */ 181 two_pow_sppr = 1 << sppr; 182 divider = (divider + two_pow_sppr - 1) & -two_pow_sppr; 183 184 /* 185 * recalculate sppr as rounding up divider might have 186 * increased it enough to change the position of the 187 * highest set bit. In this case the bit that now 188 * doesn't make it into SPR is 0, so there is no need to 189 * round again. 190 */ 191 sppr = fls(divider) - 4; 192 spr = divider >> sppr; 193 194 /* 195 * Now do range checking. SPR is constructed to have a 196 * width of 4 bits, so this is fine for sure. So we 197 * still need to check for sppr to fit into 3 bits: 198 */ 199 if (sppr > 7) 200 return -EINVAL; 201 } 202 203 prescale = ((sppr & 0x6) << 5) | ((sppr & 0x1) << 4) | spr; 204 } else { 205 /* 206 * the supported rates are: 4,6,8...30 207 * round up as we look for equal or less speed 208 */ 209 rate = DIV_ROUND_UP(tclk_hz, speed); 210 rate = roundup(rate, 2); 211 212 /* check if requested speed is too small */ 213 if (rate > 30) 214 return -EINVAL; 215 216 if (rate < 4) 217 rate = 4; 218 219 /* Convert the rate to SPI clock divisor value. */ 220 prescale = 0x10 + rate/2; 221 } 222 223 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 224 reg = ((reg & ~devdata->prescale_mask) | prescale); 225 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 226 227 return 0; 228 } 229 230 static void 231 orion_spi_mode_set(struct spi_device *spi) 232 { 233 u32 reg; 234 struct orion_spi *orion_spi; 235 236 orion_spi = spi_master_get_devdata(spi->master); 237 238 reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 239 reg &= ~ORION_SPI_MODE_MASK; 240 if (spi->mode & SPI_CPOL) 241 reg |= ORION_SPI_MODE_CPOL; 242 if (spi->mode & SPI_CPHA) 243 reg |= ORION_SPI_MODE_CPHA; 244 if (spi->mode & SPI_LSB_FIRST) 245 reg |= ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF; 246 else 247 reg &= ~(ORION_SPI_IF_RXLSBF | ORION_SPI_IF_TXLSBF); 248 249 writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG)); 250 } 251 252 static void 253 orion_spi_50mhz_ac_timing_erratum(struct spi_device *spi, unsigned int speed) 254 { 255 u32 reg; 256 struct orion_spi *orion_spi; 257 258 orion_spi = spi_master_get_devdata(spi->master); 259 260 /* 261 * Erratum description: (Erratum NO. FE-9144572) The device 262 * SPI interface supports frequencies of up to 50 MHz. 263 * However, due to this erratum, when the device core clock is 264 * 250 MHz and the SPI interfaces is configured for 50MHz SPI 265 * clock and CPOL=CPHA=1 there might occur data corruption on 266 * reads from the SPI device. 267 * Erratum Workaround: 268 * Work in one of the following configurations: 269 * 1. Set CPOL=CPHA=0 in "SPI Interface Configuration 270 * Register". 271 * 2. Set TMISO_SAMPLE value to 0x2 in "SPI Timing Parameters 1 272 * Register" before setting the interface. 273 */ 274 reg = readl(spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 275 reg &= ~ORION_SPI_TMISO_SAMPLE_MASK; 276 277 if (clk_get_rate(orion_spi->clk) == 250000000 && 278 speed == 50000000 && spi->mode & SPI_CPOL && 279 spi->mode & SPI_CPHA) 280 reg |= ORION_SPI_TMISO_SAMPLE_2; 281 else 282 reg |= ORION_SPI_TMISO_SAMPLE_1; /* This is the default value */ 283 284 writel(reg, spi_reg(orion_spi, ORION_SPI_TIMING_PARAMS_REG)); 285 } 286 287 /* 288 * called only when no transfer is active on the bus 289 */ 290 static int 291 orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) 292 { 293 struct orion_spi *orion_spi; 294 unsigned int speed = spi->max_speed_hz; 295 unsigned int bits_per_word = spi->bits_per_word; 296 int rc; 297 298 orion_spi = spi_master_get_devdata(spi->master); 299 300 if ((t != NULL) && t->speed_hz) 301 speed = t->speed_hz; 302 303 if ((t != NULL) && t->bits_per_word) 304 bits_per_word = t->bits_per_word; 305 306 orion_spi_mode_set(spi); 307 308 if (orion_spi->devdata->is_errata_50mhz_ac) 309 orion_spi_50mhz_ac_timing_erratum(spi, speed); 310 311 rc = orion_spi_baudrate_set(spi, speed); 312 if (rc) 313 return rc; 314 315 if (bits_per_word == 16) 316 orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 317 ORION_SPI_IF_8_16_BIT_MODE); 318 else 319 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG, 320 ORION_SPI_IF_8_16_BIT_MODE); 321 322 return 0; 323 } 324 325 static void orion_spi_set_cs(struct spi_device *spi, bool enable) 326 { 327 struct orion_spi *orion_spi; 328 int cs; 329 330 orion_spi = spi_master_get_devdata(spi->master); 331 332 if (gpio_is_valid(spi->cs_gpio)) 333 cs = orion_spi->unused_hw_gpio; 334 else 335 cs = spi->chip_select; 336 337 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK); 338 orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 339 ORION_SPI_CS(cs)); 340 341 /* Chip select logic is inverted from spi_set_cs */ 342 if (!enable) 343 orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 344 else 345 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 346 } 347 348 static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi) 349 { 350 int i; 351 352 for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) { 353 if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG))) 354 return 1; 355 356 udelay(1); 357 } 358 359 return -1; 360 } 361 362 static inline int 363 orion_spi_write_read_8bit(struct spi_device *spi, 364 const u8 **tx_buf, u8 **rx_buf) 365 { 366 void __iomem *tx_reg, *rx_reg, *int_reg; 367 struct orion_spi *orion_spi; 368 369 orion_spi = spi_master_get_devdata(spi->master); 370 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 371 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 372 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 373 374 /* clear the interrupt cause register */ 375 writel(0x0, int_reg); 376 377 if (tx_buf && *tx_buf) 378 writel(*(*tx_buf)++, tx_reg); 379 else 380 writel(0, tx_reg); 381 382 if (orion_spi_wait_till_ready(orion_spi) < 0) { 383 dev_err(&spi->dev, "TXS timed out\n"); 384 return -1; 385 } 386 387 if (rx_buf && *rx_buf) 388 *(*rx_buf)++ = readl(rx_reg); 389 390 return 1; 391 } 392 393 static inline int 394 orion_spi_write_read_16bit(struct spi_device *spi, 395 const u16 **tx_buf, u16 **rx_buf) 396 { 397 void __iomem *tx_reg, *rx_reg, *int_reg; 398 struct orion_spi *orion_spi; 399 400 orion_spi = spi_master_get_devdata(spi->master); 401 tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG); 402 rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG); 403 int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG); 404 405 /* clear the interrupt cause register */ 406 writel(0x0, int_reg); 407 408 if (tx_buf && *tx_buf) 409 writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg); 410 else 411 writel(0, tx_reg); 412 413 if (orion_spi_wait_till_ready(orion_spi) < 0) { 414 dev_err(&spi->dev, "TXS timed out\n"); 415 return -1; 416 } 417 418 if (rx_buf && *rx_buf) 419 put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++); 420 421 return 1; 422 } 423 424 static unsigned int 425 orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) 426 { 427 unsigned int count; 428 int word_len; 429 struct orion_spi *orion_spi; 430 int cs = spi->chip_select; 431 void __iomem *vaddr; 432 433 word_len = spi->bits_per_word; 434 count = xfer->len; 435 436 orion_spi = spi_master_get_devdata(spi->master); 437 438 /* 439 * Use SPI direct write mode if base address is available. Otherwise 440 * fall back to PIO mode for this transfer. 441 */ 442 vaddr = orion_spi->child[cs].direct_access.vaddr; 443 444 if (vaddr && xfer->tx_buf && word_len == 8) { 445 unsigned int cnt = count / 4; 446 unsigned int rem = count % 4; 447 448 /* 449 * Send the TX-data to the SPI device via the direct 450 * mapped address window 451 */ 452 iowrite32_rep(vaddr, xfer->tx_buf, cnt); 453 if (rem) { 454 u32 *buf = (u32 *)xfer->tx_buf; 455 456 iowrite8_rep(vaddr, &buf[cnt], rem); 457 } 458 459 return count; 460 } 461 462 if (word_len == 8) { 463 const u8 *tx = xfer->tx_buf; 464 u8 *rx = xfer->rx_buf; 465 466 do { 467 if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0) 468 goto out; 469 count--; 470 spi_delay_exec(&xfer->word_delay, xfer); 471 } while (count); 472 } else if (word_len == 16) { 473 const u16 *tx = xfer->tx_buf; 474 u16 *rx = xfer->rx_buf; 475 476 do { 477 if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0) 478 goto out; 479 count -= 2; 480 spi_delay_exec(&xfer->word_delay, xfer); 481 } while (count); 482 } 483 484 out: 485 return xfer->len - count; 486 } 487 488 static int orion_spi_transfer_one(struct spi_master *master, 489 struct spi_device *spi, 490 struct spi_transfer *t) 491 { 492 int status = 0; 493 494 status = orion_spi_setup_transfer(spi, t); 495 if (status < 0) 496 return status; 497 498 if (t->len) 499 orion_spi_write_read(spi, t); 500 501 return status; 502 } 503 504 static int orion_spi_setup(struct spi_device *spi) 505 { 506 if (gpio_is_valid(spi->cs_gpio)) { 507 gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); 508 } 509 return orion_spi_setup_transfer(spi, NULL); 510 } 511 512 static int orion_spi_reset(struct orion_spi *orion_spi) 513 { 514 /* Verify that the CS is deasserted */ 515 orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1); 516 517 /* Don't deassert CS between the direct mapped SPI transfers */ 518 writel(0, spi_reg(orion_spi, SPI_DIRECT_WRITE_CONFIG_REG)); 519 520 return 0; 521 } 522 523 static const struct orion_spi_dev orion_spi_dev_data = { 524 .typ = ORION_SPI, 525 .min_divisor = 4, 526 .max_divisor = 30, 527 .prescale_mask = ORION_SPI_CLK_PRESCALE_MASK, 528 }; 529 530 static const struct orion_spi_dev armada_370_spi_dev_data = { 531 .typ = ARMADA_SPI, 532 .min_divisor = 4, 533 .max_divisor = 1920, 534 .max_hz = 50000000, 535 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 536 }; 537 538 static const struct orion_spi_dev armada_xp_spi_dev_data = { 539 .typ = ARMADA_SPI, 540 .max_hz = 50000000, 541 .max_divisor = 1920, 542 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 543 }; 544 545 static const struct orion_spi_dev armada_375_spi_dev_data = { 546 .typ = ARMADA_SPI, 547 .min_divisor = 15, 548 .max_divisor = 1920, 549 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 550 }; 551 552 static const struct orion_spi_dev armada_380_spi_dev_data = { 553 .typ = ARMADA_SPI, 554 .max_hz = 50000000, 555 .max_divisor = 1920, 556 .prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK, 557 .is_errata_50mhz_ac = true, 558 }; 559 560 static const struct of_device_id orion_spi_of_match_table[] = { 561 { 562 .compatible = "marvell,orion-spi", 563 .data = &orion_spi_dev_data, 564 }, 565 { 566 .compatible = "marvell,armada-370-spi", 567 .data = &armada_370_spi_dev_data, 568 }, 569 { 570 .compatible = "marvell,armada-375-spi", 571 .data = &armada_375_spi_dev_data, 572 }, 573 { 574 .compatible = "marvell,armada-380-spi", 575 .data = &armada_380_spi_dev_data, 576 }, 577 { 578 .compatible = "marvell,armada-390-spi", 579 .data = &armada_xp_spi_dev_data, 580 }, 581 { 582 .compatible = "marvell,armada-xp-spi", 583 .data = &armada_xp_spi_dev_data, 584 }, 585 586 {} 587 }; 588 MODULE_DEVICE_TABLE(of, orion_spi_of_match_table); 589 590 static int orion_spi_probe(struct platform_device *pdev) 591 { 592 const struct of_device_id *of_id; 593 const struct orion_spi_dev *devdata; 594 struct spi_master *master; 595 struct orion_spi *spi; 596 struct resource *r; 597 unsigned long tclk_hz; 598 int status = 0; 599 struct device_node *np; 600 601 master = spi_alloc_master(&pdev->dev, sizeof(*spi)); 602 if (master == NULL) { 603 dev_dbg(&pdev->dev, "master allocation failed\n"); 604 return -ENOMEM; 605 } 606 607 if (pdev->id != -1) 608 master->bus_num = pdev->id; 609 if (pdev->dev.of_node) { 610 u32 cell_index; 611 612 if (!of_property_read_u32(pdev->dev.of_node, "cell-index", 613 &cell_index)) 614 master->bus_num = cell_index; 615 } 616 617 /* we support all 4 SPI modes and LSB first option */ 618 master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; 619 master->set_cs = orion_spi_set_cs; 620 master->transfer_one = orion_spi_transfer_one; 621 master->num_chipselect = ORION_NUM_CHIPSELECTS; 622 master->setup = orion_spi_setup; 623 master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16); 624 master->auto_runtime_pm = true; 625 master->flags = SPI_MASTER_GPIO_SS; 626 627 platform_set_drvdata(pdev, master); 628 629 spi = spi_master_get_devdata(master); 630 spi->master = master; 631 spi->unused_hw_gpio = -1; 632 633 of_id = of_match_device(orion_spi_of_match_table, &pdev->dev); 634 devdata = (of_id) ? of_id->data : &orion_spi_dev_data; 635 spi->devdata = devdata; 636 637 spi->clk = devm_clk_get(&pdev->dev, NULL); 638 if (IS_ERR(spi->clk)) { 639 status = PTR_ERR(spi->clk); 640 goto out; 641 } 642 643 status = clk_prepare_enable(spi->clk); 644 if (status) 645 goto out; 646 647 /* The following clock is only used by some SoCs */ 648 spi->axi_clk = devm_clk_get(&pdev->dev, "axi"); 649 if (IS_ERR(spi->axi_clk) && 650 PTR_ERR(spi->axi_clk) == -EPROBE_DEFER) { 651 status = -EPROBE_DEFER; 652 goto out_rel_clk; 653 } 654 if (!IS_ERR(spi->axi_clk)) 655 clk_prepare_enable(spi->axi_clk); 656 657 tclk_hz = clk_get_rate(spi->clk); 658 659 /* 660 * With old device tree, armada-370-spi could be used with 661 * Armada XP, however for this SoC the maximum frequency is 662 * 50MHz instead of tclk/4. On Armada 370, tclk cannot be 663 * higher than 200MHz. So, in order to be able to handle both 664 * SoCs, we can take the minimum of 50MHz and tclk/4. 665 */ 666 if (of_device_is_compatible(pdev->dev.of_node, 667 "marvell,armada-370-spi")) 668 master->max_speed_hz = min(devdata->max_hz, 669 DIV_ROUND_UP(tclk_hz, devdata->min_divisor)); 670 else if (devdata->min_divisor) 671 master->max_speed_hz = 672 DIV_ROUND_UP(tclk_hz, devdata->min_divisor); 673 else 674 master->max_speed_hz = devdata->max_hz; 675 master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor); 676 677 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 678 spi->base = devm_ioremap_resource(&pdev->dev, r); 679 if (IS_ERR(spi->base)) { 680 status = PTR_ERR(spi->base); 681 goto out_rel_axi_clk; 682 } 683 684 for_each_available_child_of_node(pdev->dev.of_node, np) { 685 struct orion_direct_acc *dir_acc; 686 u32 cs; 687 int cs_gpio; 688 689 /* Get chip-select number from the "reg" property */ 690 status = of_property_read_u32(np, "reg", &cs); 691 if (status) { 692 dev_err(&pdev->dev, 693 "%pOF has no valid 'reg' property (%d)\n", 694 np, status); 695 continue; 696 } 697 698 /* 699 * Initialize the CS GPIO: 700 * - properly request the actual GPIO signal 701 * - de-assert the logical signal so that all GPIO CS lines 702 * are inactive when probing for slaves 703 * - find an unused physical CS which will be driven for any 704 * slave which uses a CS GPIO 705 */ 706 cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", cs); 707 if (cs_gpio > 0) { 708 char *gpio_name; 709 int cs_flags; 710 711 if (spi->unused_hw_gpio == -1) { 712 dev_info(&pdev->dev, 713 "Selected unused HW CS#%d for any GPIO CSes\n", 714 cs); 715 spi->unused_hw_gpio = cs; 716 } 717 718 gpio_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, 719 "%s-CS%d", dev_name(&pdev->dev), cs); 720 if (!gpio_name) { 721 status = -ENOMEM; 722 goto out_rel_axi_clk; 723 } 724 725 cs_flags = of_property_read_bool(np, "spi-cs-high") ? 726 GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH; 727 status = devm_gpio_request_one(&pdev->dev, cs_gpio, 728 cs_flags, gpio_name); 729 if (status) { 730 dev_err(&pdev->dev, 731 "Can't request GPIO for CS %d\n", cs); 732 goto out_rel_axi_clk; 733 } 734 } 735 736 /* 737 * Check if an address is configured for this SPI device. If 738 * not, the MBus mapping via the 'ranges' property in the 'soc' 739 * node is not configured and this device should not use the 740 * direct mode. In this case, just continue with the next 741 * device. 742 */ 743 status = of_address_to_resource(pdev->dev.of_node, cs + 1, r); 744 if (status) 745 continue; 746 747 /* 748 * Only map one page for direct access. This is enough for the 749 * simple TX transfer which only writes to the first word. 750 * This needs to get extended for the direct SPI-NOR / SPI-NAND 751 * support, once this gets implemented. 752 */ 753 dir_acc = &spi->child[cs].direct_access; 754 dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE); 755 if (!dir_acc->vaddr) { 756 status = -ENOMEM; 757 goto out_rel_axi_clk; 758 } 759 dir_acc->size = PAGE_SIZE; 760 761 dev_info(&pdev->dev, "CS%d configured for direct access\n", cs); 762 } 763 764 pm_runtime_set_active(&pdev->dev); 765 pm_runtime_use_autosuspend(&pdev->dev); 766 pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); 767 pm_runtime_enable(&pdev->dev); 768 769 status = orion_spi_reset(spi); 770 if (status < 0) 771 goto out_rel_pm; 772 773 master->dev.of_node = pdev->dev.of_node; 774 status = spi_register_master(master); 775 if (status < 0) 776 goto out_rel_pm; 777 778 return status; 779 780 out_rel_pm: 781 pm_runtime_disable(&pdev->dev); 782 out_rel_axi_clk: 783 clk_disable_unprepare(spi->axi_clk); 784 out_rel_clk: 785 clk_disable_unprepare(spi->clk); 786 out: 787 spi_master_put(master); 788 return status; 789 } 790 791 792 static int orion_spi_remove(struct platform_device *pdev) 793 { 794 struct spi_master *master = platform_get_drvdata(pdev); 795 struct orion_spi *spi = spi_master_get_devdata(master); 796 797 pm_runtime_get_sync(&pdev->dev); 798 clk_disable_unprepare(spi->axi_clk); 799 clk_disable_unprepare(spi->clk); 800 801 spi_unregister_master(master); 802 pm_runtime_disable(&pdev->dev); 803 804 return 0; 805 } 806 807 MODULE_ALIAS("platform:" DRIVER_NAME); 808 809 #ifdef CONFIG_PM 810 static int orion_spi_runtime_suspend(struct device *dev) 811 { 812 struct spi_master *master = dev_get_drvdata(dev); 813 struct orion_spi *spi = spi_master_get_devdata(master); 814 815 clk_disable_unprepare(spi->axi_clk); 816 clk_disable_unprepare(spi->clk); 817 return 0; 818 } 819 820 static int orion_spi_runtime_resume(struct device *dev) 821 { 822 struct spi_master *master = dev_get_drvdata(dev); 823 struct orion_spi *spi = spi_master_get_devdata(master); 824 825 if (!IS_ERR(spi->axi_clk)) 826 clk_prepare_enable(spi->axi_clk); 827 return clk_prepare_enable(spi->clk); 828 } 829 #endif 830 831 static const struct dev_pm_ops orion_spi_pm_ops = { 832 SET_RUNTIME_PM_OPS(orion_spi_runtime_suspend, 833 orion_spi_runtime_resume, 834 NULL) 835 }; 836 837 static struct platform_driver orion_spi_driver = { 838 .driver = { 839 .name = DRIVER_NAME, 840 .pm = &orion_spi_pm_ops, 841 .of_match_table = of_match_ptr(orion_spi_of_match_table), 842 }, 843 .probe = orion_spi_probe, 844 .remove = orion_spi_remove, 845 }; 846 847 module_platform_driver(orion_spi_driver); 848 849 MODULE_DESCRIPTION("Orion SPI driver"); 850 MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>"); 851 MODULE_LICENSE("GPL"); 852