xref: /linux/drivers/spi/spi-mpc512x-psc.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * MPC512x PSC in SPI mode driver.
4  *
5  * Copyright (C) 2007,2008 Freescale Semiconductor Inc.
6  * Original port from 52xx driver:
7  *	Hongjun Chen <hong-jun.chen@freescale.com>
8  *
9  * Fork of mpc52xx_psc_spi.c:
10  *	Copyright (C) 2006 TOPTICA Photonics AG., Dragos Carp
11  */
12 
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/errno.h>
16 #include <linux/interrupt.h>
17 #include <linux/completion.h>
18 #include <linux/io.h>
19 #include <linux/platform_device.h>
20 #include <linux/property.h>
21 #include <linux/delay.h>
22 #include <linux/clk.h>
23 #include <linux/spi/spi.h>
24 #include <asm/mpc52xx_psc.h>
25 
26 enum {
27 	TYPE_MPC5121,
28 	TYPE_MPC5125,
29 };
30 
31 /*
32  * This macro abstracts the differences in the PSC register layout between
33  * MPC5121 (which uses a struct mpc52xx_psc) and MPC5125 (using mpc5125_psc).
34  */
35 #define psc_addr(mps, regname) ({					\
36 	void *__ret = NULL;						\
37 	switch (mps->type) {						\
38 	case TYPE_MPC5121: {						\
39 			struct mpc52xx_psc __iomem *psc = mps->psc;	\
40 			__ret = &psc->regname;				\
41 		};							\
42 		break;							\
43 	case TYPE_MPC5125: {						\
44 			struct mpc5125_psc __iomem *psc = mps->psc;	\
45 			__ret = &psc->regname;				\
46 		};							\
47 		break;							\
48 	}								\
49 	__ret; })
50 
51 struct mpc512x_psc_spi {
52 	/* driver internal data */
53 	int type;
54 	void __iomem *psc;
55 	struct mpc512x_psc_fifo __iomem *fifo;
56 	int irq;
57 	u8 bits_per_word;
58 	u32 mclk_rate;
59 
60 	struct completion txisrdone;
61 };
62 
63 /* controller state */
64 struct mpc512x_psc_spi_cs {
65 	int bits_per_word;
66 	int speed_hz;
67 };
68 
69 /* set clock freq, clock ramp, bits per work
70  * if t is NULL then reset the values to the default values
71  */
72 static int mpc512x_psc_spi_transfer_setup(struct spi_device *spi,
73 					  struct spi_transfer *t)
74 {
75 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
76 
77 	cs->speed_hz = (t && t->speed_hz)
78 	    ? t->speed_hz : spi->max_speed_hz;
79 	cs->bits_per_word = (t && t->bits_per_word)
80 	    ? t->bits_per_word : spi->bits_per_word;
81 	cs->bits_per_word = ((cs->bits_per_word + 7) / 8) * 8;
82 	return 0;
83 }
84 
85 static void mpc512x_psc_spi_activate_cs(struct spi_device *spi)
86 {
87 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
88 	struct mpc512x_psc_spi *mps = spi_controller_get_devdata(spi->controller);
89 	u32 sicr;
90 	u32 ccr;
91 	int speed;
92 	u16 bclkdiv;
93 
94 	sicr = in_be32(psc_addr(mps, sicr));
95 
96 	/* Set clock phase and polarity */
97 	if (spi->mode & SPI_CPHA)
98 		sicr |= 0x00001000;
99 	else
100 		sicr &= ~0x00001000;
101 
102 	if (spi->mode & SPI_CPOL)
103 		sicr |= 0x00002000;
104 	else
105 		sicr &= ~0x00002000;
106 
107 	if (spi->mode & SPI_LSB_FIRST)
108 		sicr |= 0x10000000;
109 	else
110 		sicr &= ~0x10000000;
111 	out_be32(psc_addr(mps, sicr), sicr);
112 
113 	ccr = in_be32(psc_addr(mps, ccr));
114 	ccr &= 0xFF000000;
115 	speed = cs->speed_hz;
116 	if (!speed)
117 		speed = 1000000;	/* default 1MHz */
118 	bclkdiv = (mps->mclk_rate / speed) - 1;
119 
120 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
121 	out_be32(psc_addr(mps, ccr), ccr);
122 	mps->bits_per_word = cs->bits_per_word;
123 
124 	if (spi_get_csgpiod(spi, 0)) {
125 		/* gpiolib will deal with the inversion */
126 		gpiod_set_value(spi_get_csgpiod(spi, 0), 1);
127 	}
128 }
129 
130 static void mpc512x_psc_spi_deactivate_cs(struct spi_device *spi)
131 {
132 	if (spi_get_csgpiod(spi, 0)) {
133 		/* gpiolib will deal with the inversion */
134 		gpiod_set_value(spi_get_csgpiod(spi, 0), 0);
135 	}
136 }
137 
138 /* extract and scale size field in txsz or rxsz */
139 #define MPC512x_PSC_FIFO_SZ(sz) ((sz & 0x7ff) << 2);
140 
141 #define EOFBYTE 1
142 
143 static int mpc512x_psc_spi_transfer_rxtx(struct spi_device *spi,
144 					 struct spi_transfer *t)
145 {
146 	struct mpc512x_psc_spi *mps = spi_controller_get_devdata(spi->controller);
147 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
148 	size_t tx_len = t->len;
149 	size_t rx_len = t->len;
150 	u8 *tx_buf = (u8 *)t->tx_buf;
151 	u8 *rx_buf = (u8 *)t->rx_buf;
152 
153 	if (!tx_buf && !rx_buf && t->len)
154 		return -EINVAL;
155 
156 	while (rx_len || tx_len) {
157 		size_t txcount;
158 		u8 data;
159 		size_t fifosz;
160 		size_t rxcount;
161 		int rxtries;
162 
163 		/*
164 		 * send the TX bytes in as large a chunk as possible
165 		 * but neither exceed the TX nor the RX FIFOs
166 		 */
167 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->txsz));
168 		txcount = min(fifosz, tx_len);
169 		fifosz = MPC512x_PSC_FIFO_SZ(in_be32(&fifo->rxsz));
170 		fifosz -= in_be32(&fifo->rxcnt) + 1;
171 		txcount = min(fifosz, txcount);
172 		if (txcount) {
173 
174 			/* fill the TX FIFO */
175 			while (txcount-- > 0) {
176 				data = tx_buf ? *tx_buf++ : 0;
177 				if (tx_len == EOFBYTE && t->cs_change)
178 					setbits32(&fifo->txcmd,
179 						  MPC512x_PSC_FIFO_EOF);
180 				out_8(&fifo->txdata_8, data);
181 				tx_len--;
182 			}
183 
184 			/* have the ISR trigger when the TX FIFO is empty */
185 			reinit_completion(&mps->txisrdone);
186 			out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
187 			out_be32(&fifo->tximr, MPC512x_PSC_FIFO_EMPTY);
188 			wait_for_completion(&mps->txisrdone);
189 		}
190 
191 		/*
192 		 * consume as much RX data as the FIFO holds, while we
193 		 * iterate over the transfer's TX data length
194 		 *
195 		 * only insist in draining all the remaining RX bytes
196 		 * when the TX bytes were exhausted (that's at the very
197 		 * end of this transfer, not when still iterating over
198 		 * the transfer's chunks)
199 		 */
200 		rxtries = 50;
201 		do {
202 
203 			/*
204 			 * grab whatever was in the FIFO when we started
205 			 * looking, don't bother fetching what was added to
206 			 * the FIFO while we read from it -- we'll return
207 			 * here eventually and prefer sending out remaining
208 			 * TX data
209 			 */
210 			fifosz = in_be32(&fifo->rxcnt);
211 			rxcount = min(fifosz, rx_len);
212 			while (rxcount-- > 0) {
213 				data = in_8(&fifo->rxdata_8);
214 				if (rx_buf)
215 					*rx_buf++ = data;
216 				rx_len--;
217 			}
218 
219 			/*
220 			 * come back later if there still is TX data to send,
221 			 * bail out of the RX drain loop if all of the TX data
222 			 * was sent and all of the RX data was received (i.e.
223 			 * when the transmission has completed)
224 			 */
225 			if (tx_len)
226 				break;
227 			if (!rx_len)
228 				break;
229 
230 			/*
231 			 * TX data transmission has completed while RX data
232 			 * is still pending -- that's a transient situation
233 			 * which depends on wire speed and specific
234 			 * hardware implementation details (buffering) yet
235 			 * should resolve very quickly
236 			 *
237 			 * just yield for a moment to not hog the CPU for
238 			 * too long when running SPI at low speed
239 			 *
240 			 * the timeout range is rather arbitrary and tries
241 			 * to balance throughput against system load; the
242 			 * chosen values result in a minimal timeout of 50
243 			 * times 10us and thus work at speeds as low as
244 			 * some 20kbps, while the maximum timeout at the
245 			 * transfer's end could be 5ms _if_ nothing else
246 			 * ticks in the system _and_ RX data still wasn't
247 			 * received, which only occurs in situations that
248 			 * are exceptional; removing the unpredictability
249 			 * of the timeout either decreases throughput
250 			 * (longer timeouts), or puts more load on the
251 			 * system (fixed short timeouts) or requires the
252 			 * use of a timeout API instead of a counter and an
253 			 * unknown inner delay
254 			 */
255 			usleep_range(10, 100);
256 
257 		} while (--rxtries > 0);
258 		if (!tx_len && rx_len && !rxtries) {
259 			/*
260 			 * not enough RX bytes even after several retries
261 			 * and the resulting rather long timeout?
262 			 */
263 			rxcount = in_be32(&fifo->rxcnt);
264 			dev_warn(&spi->dev,
265 				 "short xfer, missing %zd RX bytes, FIFO level %zd\n",
266 				 rx_len, rxcount);
267 		}
268 
269 		/*
270 		 * drain and drop RX data which "should not be there" in
271 		 * the first place, for undisturbed transmission this turns
272 		 * into a NOP (except for the FIFO level fetch)
273 		 */
274 		if (!tx_len && !rx_len) {
275 			while (in_be32(&fifo->rxcnt))
276 				in_8(&fifo->rxdata_8);
277 		}
278 
279 	}
280 	return 0;
281 }
282 
283 static int mpc512x_psc_spi_msg_xfer(struct spi_controller *host,
284 				    struct spi_message *m)
285 {
286 	struct spi_device *spi;
287 	unsigned cs_change;
288 	int status;
289 	struct spi_transfer *t;
290 
291 	spi = m->spi;
292 	cs_change = 1;
293 	status = 0;
294 	list_for_each_entry(t, &m->transfers, transfer_list) {
295 		status = mpc512x_psc_spi_transfer_setup(spi, t);
296 		if (status < 0)
297 			break;
298 
299 		if (cs_change)
300 			mpc512x_psc_spi_activate_cs(spi);
301 		cs_change = t->cs_change;
302 
303 		status = mpc512x_psc_spi_transfer_rxtx(spi, t);
304 		if (status)
305 			break;
306 		m->actual_length += t->len;
307 
308 		spi_transfer_delay_exec(t);
309 
310 		if (cs_change)
311 			mpc512x_psc_spi_deactivate_cs(spi);
312 	}
313 
314 	m->status = status;
315 	if (m->complete)
316 		m->complete(m->context);
317 
318 	if (status || !cs_change)
319 		mpc512x_psc_spi_deactivate_cs(spi);
320 
321 	mpc512x_psc_spi_transfer_setup(spi, NULL);
322 
323 	spi_finalize_current_message(host);
324 	return status;
325 }
326 
327 static int mpc512x_psc_spi_prep_xfer_hw(struct spi_controller *host)
328 {
329 	struct mpc512x_psc_spi *mps = spi_controller_get_devdata(host);
330 
331 	dev_dbg(&host->dev, "%s()\n", __func__);
332 
333 	/* Zero MR2 */
334 	in_8(psc_addr(mps, mr2));
335 	out_8(psc_addr(mps, mr2), 0x0);
336 
337 	/* enable transmitter/receiver */
338 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
339 
340 	return 0;
341 }
342 
343 static int mpc512x_psc_spi_unprep_xfer_hw(struct spi_controller *host)
344 {
345 	struct mpc512x_psc_spi *mps = spi_controller_get_devdata(host);
346 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
347 
348 	dev_dbg(&host->dev, "%s()\n", __func__);
349 
350 	/* disable transmitter/receiver and fifo interrupt */
351 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
352 	out_be32(&fifo->tximr, 0);
353 
354 	return 0;
355 }
356 
357 static int mpc512x_psc_spi_setup(struct spi_device *spi)
358 {
359 	struct mpc512x_psc_spi_cs *cs = spi->controller_state;
360 
361 	if (spi->bits_per_word % 8)
362 		return -EINVAL;
363 
364 	if (!cs) {
365 		cs = kzalloc(sizeof(*cs), GFP_KERNEL);
366 		if (!cs)
367 			return -ENOMEM;
368 
369 		spi->controller_state = cs;
370 	}
371 
372 	cs->bits_per_word = spi->bits_per_word;
373 	cs->speed_hz = spi->max_speed_hz;
374 
375 	return 0;
376 }
377 
378 static void mpc512x_psc_spi_cleanup(struct spi_device *spi)
379 {
380 	kfree(spi->controller_state);
381 }
382 
383 static int mpc512x_psc_spi_port_config(struct spi_controller *host,
384 				       struct mpc512x_psc_spi *mps)
385 {
386 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
387 	u32 sicr;
388 	u32 ccr;
389 	int speed;
390 	u16 bclkdiv;
391 
392 	/* Reset the PSC into a known state */
393 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_RX);
394 	out_8(psc_addr(mps, command), MPC52xx_PSC_RST_TX);
395 	out_8(psc_addr(mps, command), MPC52xx_PSC_TX_DISABLE | MPC52xx_PSC_RX_DISABLE);
396 
397 	/* Disable psc interrupts all useful interrupts are in fifo */
398 	out_be16(psc_addr(mps, isr_imr.imr), 0);
399 
400 	/* Disable fifo interrupts, will be enabled later */
401 	out_be32(&fifo->tximr, 0);
402 	out_be32(&fifo->rximr, 0);
403 
404 	/* Setup fifo slice address and size */
405 	/*out_be32(&fifo->txsz, 0x0fe00004);*/
406 	/*out_be32(&fifo->rxsz, 0x0ff00004);*/
407 
408 	sicr =	0x01000000 |	/* SIM = 0001 -- 8 bit */
409 		0x00800000 |	/* GenClk = 1 -- internal clk */
410 		0x00008000 |	/* SPI = 1 */
411 		0x00004000 |	/* MSTR = 1   -- SPI host */
412 		0x00000800;	/* UseEOF = 1 -- SS low until EOF */
413 
414 	out_be32(psc_addr(mps, sicr), sicr);
415 
416 	ccr = in_be32(psc_addr(mps, ccr));
417 	ccr &= 0xFF000000;
418 	speed = 1000000;	/* default 1MHz */
419 	bclkdiv = (mps->mclk_rate / speed) - 1;
420 	ccr |= (((bclkdiv & 0xff) << 16) | (((bclkdiv >> 8) & 0xff) << 8));
421 	out_be32(psc_addr(mps, ccr), ccr);
422 
423 	/* Set 2ms DTL delay */
424 	out_8(psc_addr(mps, ctur), 0x00);
425 	out_8(psc_addr(mps, ctlr), 0x82);
426 
427 	/* we don't use the alarms */
428 	out_be32(&fifo->rxalarm, 0xfff);
429 	out_be32(&fifo->txalarm, 0);
430 
431 	/* Enable FIFO slices for Rx/Tx */
432 	out_be32(&fifo->rxcmd,
433 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
434 	out_be32(&fifo->txcmd,
435 		 MPC512x_PSC_FIFO_ENABLE_SLICE | MPC512x_PSC_FIFO_ENABLE_DMA);
436 
437 	mps->bits_per_word = 8;
438 
439 	return 0;
440 }
441 
442 static irqreturn_t mpc512x_psc_spi_isr(int irq, void *dev_id)
443 {
444 	struct mpc512x_psc_spi *mps = (struct mpc512x_psc_spi *)dev_id;
445 	struct mpc512x_psc_fifo __iomem *fifo = mps->fifo;
446 
447 	/* clear interrupt and wake up the rx/tx routine */
448 	if (in_be32(&fifo->txisr) &
449 	    in_be32(&fifo->tximr) & MPC512x_PSC_FIFO_EMPTY) {
450 		out_be32(&fifo->txisr, MPC512x_PSC_FIFO_EMPTY);
451 		out_be32(&fifo->tximr, 0);
452 		complete(&mps->txisrdone);
453 		return IRQ_HANDLED;
454 	}
455 	return IRQ_NONE;
456 }
457 
458 static int mpc512x_psc_spi_of_probe(struct platform_device *pdev)
459 {
460 	struct device *dev = &pdev->dev;
461 	struct mpc512x_psc_spi *mps;
462 	struct spi_controller *host;
463 	int ret;
464 	void *tempp;
465 	struct clk *clk;
466 
467 	host = devm_spi_alloc_host(dev, sizeof(*mps));
468 	if (host == NULL)
469 		return -ENOMEM;
470 
471 	dev_set_drvdata(dev, host);
472 	mps = spi_controller_get_devdata(host);
473 	mps->type = (int)device_get_match_data(dev);
474 
475 	host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
476 	host->setup = mpc512x_psc_spi_setup;
477 	host->prepare_transfer_hardware = mpc512x_psc_spi_prep_xfer_hw;
478 	host->transfer_one_message = mpc512x_psc_spi_msg_xfer;
479 	host->unprepare_transfer_hardware = mpc512x_psc_spi_unprep_xfer_hw;
480 	host->use_gpio_descriptors = true;
481 	host->cleanup = mpc512x_psc_spi_cleanup;
482 
483 	device_set_node(&host->dev, dev_fwnode(dev));
484 
485 	tempp = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
486 	if (IS_ERR(tempp))
487 		return dev_err_probe(dev, PTR_ERR(tempp), "could not ioremap I/O port range\n");
488 	mps->psc = tempp;
489 	mps->fifo =
490 		(struct mpc512x_psc_fifo *)(tempp + sizeof(struct mpc52xx_psc));
491 
492 	mps->irq = platform_get_irq(pdev, 0);
493 	if (mps->irq < 0)
494 		return mps->irq;
495 
496 	ret = devm_request_irq(dev, mps->irq, mpc512x_psc_spi_isr, IRQF_SHARED,
497 				"mpc512x-psc-spi", mps);
498 	if (ret)
499 		return ret;
500 	init_completion(&mps->txisrdone);
501 
502 	clk = devm_clk_get_enabled(dev, "mclk");
503 	if (IS_ERR(clk))
504 		return PTR_ERR(clk);
505 
506 	mps->mclk_rate = clk_get_rate(clk);
507 
508 	clk = devm_clk_get_enabled(dev, "ipg");
509 	if (IS_ERR(clk))
510 		return PTR_ERR(clk);
511 
512 	ret = mpc512x_psc_spi_port_config(host, mps);
513 	if (ret < 0)
514 		return ret;
515 
516 	return devm_spi_register_controller(dev, host);
517 }
518 
519 static const struct of_device_id mpc512x_psc_spi_of_match[] = {
520 	{ .compatible = "fsl,mpc5121-psc-spi", .data = (void *)TYPE_MPC5121 },
521 	{ .compatible = "fsl,mpc5125-psc-spi", .data = (void *)TYPE_MPC5125 },
522 	{},
523 };
524 
525 MODULE_DEVICE_TABLE(of, mpc512x_psc_spi_of_match);
526 
527 static struct platform_driver mpc512x_psc_spi_of_driver = {
528 	.probe = mpc512x_psc_spi_of_probe,
529 	.driver = {
530 		.name = "mpc512x-psc-spi",
531 		.of_match_table = mpc512x_psc_spi_of_match,
532 	},
533 };
534 module_platform_driver(mpc512x_psc_spi_of_driver);
535 
536 MODULE_AUTHOR("John Rigby");
537 MODULE_DESCRIPTION("MPC512x PSC SPI Driver");
538 MODULE_LICENSE("GPL");
539