1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for the Diolan DLN-2 USB-SPI adapter 4 * 5 * Copyright (c) 2014 Intel Corporation 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/platform_device.h> 11 #include <linux/property.h> 12 #include <linux/mfd/dln2.h> 13 #include <linux/spi/spi.h> 14 #include <linux/pm_runtime.h> 15 #include <linux/unaligned.h> 16 17 #define DLN2_SPI_MODULE_ID 0x02 18 #define DLN2_SPI_CMD(cmd) DLN2_CMD(cmd, DLN2_SPI_MODULE_ID) 19 20 /* SPI commands */ 21 #define DLN2_SPI_GET_PORT_COUNT DLN2_SPI_CMD(0x00) 22 #define DLN2_SPI_ENABLE DLN2_SPI_CMD(0x11) 23 #define DLN2_SPI_DISABLE DLN2_SPI_CMD(0x12) 24 #define DLN2_SPI_IS_ENABLED DLN2_SPI_CMD(0x13) 25 #define DLN2_SPI_SET_MODE DLN2_SPI_CMD(0x14) 26 #define DLN2_SPI_GET_MODE DLN2_SPI_CMD(0x15) 27 #define DLN2_SPI_SET_FRAME_SIZE DLN2_SPI_CMD(0x16) 28 #define DLN2_SPI_GET_FRAME_SIZE DLN2_SPI_CMD(0x17) 29 #define DLN2_SPI_SET_FREQUENCY DLN2_SPI_CMD(0x18) 30 #define DLN2_SPI_GET_FREQUENCY DLN2_SPI_CMD(0x19) 31 #define DLN2_SPI_READ_WRITE DLN2_SPI_CMD(0x1A) 32 #define DLN2_SPI_READ DLN2_SPI_CMD(0x1B) 33 #define DLN2_SPI_WRITE DLN2_SPI_CMD(0x1C) 34 #define DLN2_SPI_SET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x20) 35 #define DLN2_SPI_GET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x21) 36 #define DLN2_SPI_SET_DELAY_AFTER_SS DLN2_SPI_CMD(0x22) 37 #define DLN2_SPI_GET_DELAY_AFTER_SS DLN2_SPI_CMD(0x23) 38 #define DLN2_SPI_SET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x24) 39 #define DLN2_SPI_GET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x25) 40 #define DLN2_SPI_SET_SS DLN2_SPI_CMD(0x26) 41 #define DLN2_SPI_GET_SS DLN2_SPI_CMD(0x27) 42 #define DLN2_SPI_RELEASE_SS DLN2_SPI_CMD(0x28) 43 #define DLN2_SPI_SS_VARIABLE_ENABLE DLN2_SPI_CMD(0x2B) 44 #define DLN2_SPI_SS_VARIABLE_DISABLE DLN2_SPI_CMD(0x2C) 45 #define DLN2_SPI_SS_VARIABLE_IS_ENABLED DLN2_SPI_CMD(0x2D) 46 #define DLN2_SPI_SS_AAT_ENABLE DLN2_SPI_CMD(0x2E) 47 #define DLN2_SPI_SS_AAT_DISABLE DLN2_SPI_CMD(0x2F) 48 #define DLN2_SPI_SS_AAT_IS_ENABLED DLN2_SPI_CMD(0x30) 49 #define DLN2_SPI_SS_BETWEEN_FRAMES_ENABLE DLN2_SPI_CMD(0x31) 50 #define DLN2_SPI_SS_BETWEEN_FRAMES_DISABLE DLN2_SPI_CMD(0x32) 51 #define DLN2_SPI_SS_BETWEEN_FRAMES_IS_ENABLED DLN2_SPI_CMD(0x33) 52 #define DLN2_SPI_SET_CPHA DLN2_SPI_CMD(0x34) 53 #define DLN2_SPI_GET_CPHA DLN2_SPI_CMD(0x35) 54 #define DLN2_SPI_SET_CPOL DLN2_SPI_CMD(0x36) 55 #define DLN2_SPI_GET_CPOL DLN2_SPI_CMD(0x37) 56 #define DLN2_SPI_SS_MULTI_ENABLE DLN2_SPI_CMD(0x38) 57 #define DLN2_SPI_SS_MULTI_DISABLE DLN2_SPI_CMD(0x39) 58 #define DLN2_SPI_SS_MULTI_IS_ENABLED DLN2_SPI_CMD(0x3A) 59 #define DLN2_SPI_GET_SUPPORTED_MODES DLN2_SPI_CMD(0x40) 60 #define DLN2_SPI_GET_SUPPORTED_CPHA_VALUES DLN2_SPI_CMD(0x41) 61 #define DLN2_SPI_GET_SUPPORTED_CPOL_VALUES DLN2_SPI_CMD(0x42) 62 #define DLN2_SPI_GET_SUPPORTED_FRAME_SIZES DLN2_SPI_CMD(0x43) 63 #define DLN2_SPI_GET_SS_COUNT DLN2_SPI_CMD(0x44) 64 #define DLN2_SPI_GET_MIN_FREQUENCY DLN2_SPI_CMD(0x45) 65 #define DLN2_SPI_GET_MAX_FREQUENCY DLN2_SPI_CMD(0x46) 66 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x47) 67 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x48) 68 #define DLN2_SPI_GET_MIN_DELAY_AFTER_SS DLN2_SPI_CMD(0x49) 69 #define DLN2_SPI_GET_MAX_DELAY_AFTER_SS DLN2_SPI_CMD(0x4A) 70 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4B) 71 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4C) 72 73 #define DLN2_SPI_MAX_XFER_SIZE 256 74 #define DLN2_SPI_BUF_SIZE (DLN2_SPI_MAX_XFER_SIZE + 16) 75 #define DLN2_SPI_ATTR_LEAVE_SS_LOW BIT(0) 76 #define DLN2_TRANSFERS_WAIT_COMPLETE 1 77 #define DLN2_TRANSFERS_CANCEL 0 78 #define DLN2_RPM_AUTOSUSPEND_TIMEOUT 2000 79 80 struct dln2_spi { 81 struct platform_device *pdev; 82 struct spi_controller *host; 83 u8 port; 84 85 /* 86 * This buffer will be used mainly for read/write operations. Since 87 * they're quite large, we cannot use the stack. Protection is not 88 * needed because all SPI communication is serialized by the SPI core. 89 */ 90 void *buf; 91 92 u8 bpw; 93 u32 speed; 94 u16 mode; 95 u8 cs; 96 }; 97 98 /* 99 * Enable/Disable SPI module. The disable command will wait for transfers to 100 * complete first. 101 */ 102 static int dln2_spi_enable(struct dln2_spi *dln2, bool enable) 103 { 104 u16 cmd; 105 struct { 106 u8 port; 107 u8 wait_for_completion; 108 } tx; 109 unsigned len = sizeof(tx); 110 111 tx.port = dln2->port; 112 113 if (enable) { 114 cmd = DLN2_SPI_ENABLE; 115 len -= sizeof(tx.wait_for_completion); 116 } else { 117 tx.wait_for_completion = DLN2_TRANSFERS_WAIT_COMPLETE; 118 cmd = DLN2_SPI_DISABLE; 119 } 120 121 return dln2_transfer_tx(dln2->pdev, cmd, &tx, len); 122 } 123 124 /* 125 * Select/unselect multiple CS lines. The selected lines will be automatically 126 * toggled LOW/HIGH by the board firmware during transfers, provided they're 127 * enabled first. 128 * 129 * Ex: cs_mask = 0x03 -> CS0 & CS1 will be selected and the next WR/RD operation 130 * will toggle the lines LOW/HIGH automatically. 131 */ 132 static int dln2_spi_cs_set(struct dln2_spi *dln2, u8 cs_mask) 133 { 134 struct { 135 u8 port; 136 u8 cs; 137 } tx; 138 139 tx.port = dln2->port; 140 141 /* 142 * According to Diolan docs, "a slave device can be selected by changing 143 * the corresponding bit value to 0". The rest must be set to 1. Hence 144 * the bitwise NOT in front. 145 */ 146 tx.cs = ~cs_mask; 147 148 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_SS, &tx, sizeof(tx)); 149 } 150 151 /* 152 * Select one CS line. The other lines will be un-selected. 153 */ 154 static int dln2_spi_cs_set_one(struct dln2_spi *dln2, u8 cs) 155 { 156 return dln2_spi_cs_set(dln2, BIT(cs)); 157 } 158 159 /* 160 * Enable/disable CS lines for usage. The module has to be disabled first. 161 */ 162 static int dln2_spi_cs_enable(struct dln2_spi *dln2, u8 cs_mask, bool enable) 163 { 164 struct { 165 u8 port; 166 u8 cs; 167 } tx; 168 u16 cmd; 169 170 tx.port = dln2->port; 171 tx.cs = cs_mask; 172 cmd = enable ? DLN2_SPI_SS_MULTI_ENABLE : DLN2_SPI_SS_MULTI_DISABLE; 173 174 return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx)); 175 } 176 177 static int dln2_spi_cs_enable_all(struct dln2_spi *dln2, bool enable) 178 { 179 u8 cs_mask = GENMASK(dln2->host->num_chipselect - 1, 0); 180 181 return dln2_spi_cs_enable(dln2, cs_mask, enable); 182 } 183 184 static int dln2_spi_get_cs_num(struct dln2_spi *dln2, u16 *cs_num) 185 { 186 int ret; 187 struct { 188 u8 port; 189 } tx; 190 struct { 191 __le16 cs_count; 192 } rx; 193 unsigned rx_len = sizeof(rx); 194 195 tx.port = dln2->port; 196 ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SS_COUNT, &tx, sizeof(tx), 197 &rx, &rx_len); 198 if (ret < 0) 199 return ret; 200 if (rx_len < sizeof(rx)) 201 return -EPROTO; 202 203 *cs_num = le16_to_cpu(rx.cs_count); 204 205 dev_dbg(&dln2->pdev->dev, "cs_num = %d\n", *cs_num); 206 207 return 0; 208 } 209 210 static int dln2_spi_get_speed(struct dln2_spi *dln2, u16 cmd, u32 *freq) 211 { 212 int ret; 213 struct { 214 u8 port; 215 } tx; 216 struct { 217 __le32 speed; 218 } rx; 219 unsigned rx_len = sizeof(rx); 220 221 tx.port = dln2->port; 222 223 ret = dln2_transfer(dln2->pdev, cmd, &tx, sizeof(tx), &rx, &rx_len); 224 if (ret < 0) 225 return ret; 226 if (rx_len < sizeof(rx)) 227 return -EPROTO; 228 229 *freq = le32_to_cpu(rx.speed); 230 231 return 0; 232 } 233 234 /* 235 * Get bus min/max frequencies. 236 */ 237 static int dln2_spi_get_speed_range(struct dln2_spi *dln2, u32 *fmin, u32 *fmax) 238 { 239 int ret; 240 241 ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MIN_FREQUENCY, fmin); 242 if (ret < 0) 243 return ret; 244 245 ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MAX_FREQUENCY, fmax); 246 if (ret < 0) 247 return ret; 248 249 dev_dbg(&dln2->pdev->dev, "freq_min = %d, freq_max = %d\n", 250 *fmin, *fmax); 251 252 return 0; 253 } 254 255 /* 256 * Set the bus speed. The module will automatically round down to the closest 257 * available frequency and returns it. The module has to be disabled first. 258 */ 259 static int dln2_spi_set_speed(struct dln2_spi *dln2, u32 speed) 260 { 261 int ret; 262 struct { 263 u8 port; 264 __le32 speed; 265 } __packed tx; 266 struct { 267 __le32 speed; 268 } rx; 269 int rx_len = sizeof(rx); 270 271 tx.port = dln2->port; 272 tx.speed = cpu_to_le32(speed); 273 274 ret = dln2_transfer(dln2->pdev, DLN2_SPI_SET_FREQUENCY, &tx, sizeof(tx), 275 &rx, &rx_len); 276 if (ret < 0) 277 return ret; 278 if (rx_len < sizeof(rx)) 279 return -EPROTO; 280 281 return 0; 282 } 283 284 /* 285 * Change CPOL & CPHA. The module has to be disabled first. 286 */ 287 static int dln2_spi_set_mode(struct dln2_spi *dln2, u8 mode) 288 { 289 struct { 290 u8 port; 291 u8 mode; 292 } tx; 293 294 tx.port = dln2->port; 295 tx.mode = mode; 296 297 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_MODE, &tx, sizeof(tx)); 298 } 299 300 /* 301 * Change frame size. The module has to be disabled first. 302 */ 303 static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw) 304 { 305 struct { 306 u8 port; 307 u8 bpw; 308 } tx; 309 310 tx.port = dln2->port; 311 tx.bpw = bpw; 312 313 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_FRAME_SIZE, 314 &tx, sizeof(tx)); 315 } 316 317 static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2, 318 u32 *bpw_mask) 319 { 320 int ret; 321 struct { 322 u8 port; 323 } tx; 324 struct { 325 u8 count; 326 u8 frame_sizes[36]; 327 } *rx = dln2->buf; 328 unsigned rx_len = sizeof(*rx); 329 int i; 330 331 tx.port = dln2->port; 332 333 ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SUPPORTED_FRAME_SIZES, 334 &tx, sizeof(tx), rx, &rx_len); 335 if (ret < 0) 336 return ret; 337 if (rx_len < sizeof(*rx)) 338 return -EPROTO; 339 if (rx->count > ARRAY_SIZE(rx->frame_sizes)) 340 return -EPROTO; 341 342 *bpw_mask = 0; 343 for (i = 0; i < rx->count; i++) 344 *bpw_mask |= BIT(rx->frame_sizes[i] - 1); 345 346 dev_dbg(&dln2->pdev->dev, "bpw_mask = 0x%X\n", *bpw_mask); 347 348 return 0; 349 } 350 351 /* 352 * Copy the data to DLN2 buffer and change the byte order to LE, requested by 353 * DLN2 module. SPI core makes sure that the data length is a multiple of word 354 * size. 355 */ 356 static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw) 357 { 358 #ifdef __LITTLE_ENDIAN 359 memcpy(dln2_buf, src, len); 360 #else 361 if (bpw <= 8) { 362 memcpy(dln2_buf, src, len); 363 } else if (bpw <= 16) { 364 __le16 *d = (__le16 *)dln2_buf; 365 u16 *s = (u16 *)src; 366 367 len = len / 2; 368 while (len--) 369 *d++ = cpu_to_le16p(s++); 370 } else { 371 __le32 *d = (__le32 *)dln2_buf; 372 u32 *s = (u32 *)src; 373 374 len = len / 4; 375 while (len--) 376 *d++ = cpu_to_le32p(s++); 377 } 378 #endif 379 380 return 0; 381 } 382 383 /* 384 * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2 385 * buffer is LE ordered. SPI core makes sure that the data length is a multiple 386 * of word size. The RX dln2_buf is 2 byte aligned so, for BE, we have to make 387 * sure we avoid unaligned accesses for 32 bit case. 388 */ 389 static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw) 390 { 391 #ifdef __LITTLE_ENDIAN 392 memcpy(dest, dln2_buf, len); 393 #else 394 if (bpw <= 8) { 395 memcpy(dest, dln2_buf, len); 396 } else if (bpw <= 16) { 397 u16 *d = (u16 *)dest; 398 __le16 *s = (__le16 *)dln2_buf; 399 400 len = len / 2; 401 while (len--) 402 *d++ = le16_to_cpup(s++); 403 } else { 404 u32 *d = (u32 *)dest; 405 __le32 *s = (__le32 *)dln2_buf; 406 407 len = len / 4; 408 while (len--) 409 *d++ = get_unaligned_le32(s++); 410 } 411 #endif 412 413 return 0; 414 } 415 416 /* 417 * Perform one write operation. 418 */ 419 static int dln2_spi_write_one(struct dln2_spi *dln2, const u8 *data, 420 u16 data_len, u8 attr) 421 { 422 struct { 423 u8 port; 424 __le16 size; 425 u8 attr; 426 u8 buf[DLN2_SPI_MAX_XFER_SIZE]; 427 } __packed *tx = dln2->buf; 428 unsigned tx_len; 429 430 BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE); 431 432 if (data_len > DLN2_SPI_MAX_XFER_SIZE) 433 return -EINVAL; 434 435 tx->port = dln2->port; 436 tx->size = cpu_to_le16(data_len); 437 tx->attr = attr; 438 439 dln2_spi_copy_to_buf(tx->buf, data, data_len, dln2->bpw); 440 441 tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE; 442 return dln2_transfer_tx(dln2->pdev, DLN2_SPI_WRITE, tx, tx_len); 443 } 444 445 /* 446 * Perform one read operation. 447 */ 448 static int dln2_spi_read_one(struct dln2_spi *dln2, u8 *data, 449 u16 data_len, u8 attr) 450 { 451 int ret; 452 struct { 453 u8 port; 454 __le16 size; 455 u8 attr; 456 } __packed tx; 457 struct { 458 __le16 size; 459 u8 buf[DLN2_SPI_MAX_XFER_SIZE]; 460 } __packed *rx = dln2->buf; 461 unsigned rx_len = sizeof(*rx); 462 463 BUILD_BUG_ON(sizeof(*rx) > DLN2_SPI_BUF_SIZE); 464 465 if (data_len > DLN2_SPI_MAX_XFER_SIZE) 466 return -EINVAL; 467 468 tx.port = dln2->port; 469 tx.size = cpu_to_le16(data_len); 470 tx.attr = attr; 471 472 ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ, &tx, sizeof(tx), 473 rx, &rx_len); 474 if (ret < 0) 475 return ret; 476 if (rx_len < sizeof(rx->size) + data_len) 477 return -EPROTO; 478 if (le16_to_cpu(rx->size) != data_len) 479 return -EPROTO; 480 481 dln2_spi_copy_from_buf(data, rx->buf, data_len, dln2->bpw); 482 483 return 0; 484 } 485 486 /* 487 * Perform one write & read operation. 488 */ 489 static int dln2_spi_read_write_one(struct dln2_spi *dln2, const u8 *tx_data, 490 u8 *rx_data, u16 data_len, u8 attr) 491 { 492 int ret; 493 struct { 494 u8 port; 495 __le16 size; 496 u8 attr; 497 u8 buf[DLN2_SPI_MAX_XFER_SIZE]; 498 } __packed *tx; 499 struct { 500 __le16 size; 501 u8 buf[DLN2_SPI_MAX_XFER_SIZE]; 502 } __packed *rx; 503 unsigned tx_len, rx_len; 504 505 BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE || 506 sizeof(*rx) > DLN2_SPI_BUF_SIZE); 507 508 if (data_len > DLN2_SPI_MAX_XFER_SIZE) 509 return -EINVAL; 510 511 /* 512 * Since this is a pseudo full-duplex communication, we're perfectly 513 * safe to use the same buffer for both tx and rx. When DLN2 sends the 514 * response back, with the rx data, we don't need the tx buffer anymore. 515 */ 516 tx = dln2->buf; 517 rx = dln2->buf; 518 519 tx->port = dln2->port; 520 tx->size = cpu_to_le16(data_len); 521 tx->attr = attr; 522 523 dln2_spi_copy_to_buf(tx->buf, tx_data, data_len, dln2->bpw); 524 525 tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE; 526 rx_len = sizeof(*rx); 527 528 ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ_WRITE, tx, tx_len, 529 rx, &rx_len); 530 if (ret < 0) 531 return ret; 532 if (rx_len < sizeof(rx->size) + data_len) 533 return -EPROTO; 534 if (le16_to_cpu(rx->size) != data_len) 535 return -EPROTO; 536 537 dln2_spi_copy_from_buf(rx_data, rx->buf, data_len, dln2->bpw); 538 539 return 0; 540 } 541 542 /* 543 * Read/Write wrapper. It will automatically split an operation into multiple 544 * single ones due to device buffer constraints. 545 */ 546 static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data, 547 u8 *rx_data, u16 data_len, u8 attr) 548 { 549 int ret; 550 u16 len; 551 u8 temp_attr; 552 u16 remaining = data_len; 553 u16 offset; 554 555 do { 556 if (remaining > DLN2_SPI_MAX_XFER_SIZE) { 557 len = DLN2_SPI_MAX_XFER_SIZE; 558 temp_attr = DLN2_SPI_ATTR_LEAVE_SS_LOW; 559 } else { 560 len = remaining; 561 temp_attr = attr; 562 } 563 564 offset = data_len - remaining; 565 566 if (tx_data && rx_data) { 567 ret = dln2_spi_read_write_one(dln2, 568 tx_data + offset, 569 rx_data + offset, 570 len, temp_attr); 571 } else if (tx_data) { 572 ret = dln2_spi_write_one(dln2, 573 tx_data + offset, 574 len, temp_attr); 575 } else if (rx_data) { 576 ret = dln2_spi_read_one(dln2, 577 rx_data + offset, 578 len, temp_attr); 579 } else { 580 return -EINVAL; 581 } 582 583 if (ret < 0) 584 return ret; 585 586 remaining -= len; 587 } while (remaining); 588 589 return 0; 590 } 591 592 static int dln2_spi_prepare_message(struct spi_controller *host, 593 struct spi_message *message) 594 { 595 int ret; 596 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 597 struct spi_device *spi = message->spi; 598 599 if (dln2->cs != spi_get_chipselect(spi, 0)) { 600 ret = dln2_spi_cs_set_one(dln2, spi_get_chipselect(spi, 0)); 601 if (ret < 0) 602 return ret; 603 604 dln2->cs = spi_get_chipselect(spi, 0); 605 } 606 607 return 0; 608 } 609 610 static int dln2_spi_transfer_setup(struct dln2_spi *dln2, u32 speed, 611 u8 bpw, u8 mode) 612 { 613 int ret; 614 bool bus_setup_change; 615 616 bus_setup_change = dln2->speed != speed || dln2->mode != mode || 617 dln2->bpw != bpw; 618 619 if (!bus_setup_change) 620 return 0; 621 622 ret = dln2_spi_enable(dln2, false); 623 if (ret < 0) 624 return ret; 625 626 if (dln2->speed != speed) { 627 ret = dln2_spi_set_speed(dln2, speed); 628 if (ret < 0) 629 return ret; 630 631 dln2->speed = speed; 632 } 633 634 if (dln2->mode != mode) { 635 ret = dln2_spi_set_mode(dln2, mode & 0x3); 636 if (ret < 0) 637 return ret; 638 639 dln2->mode = mode; 640 } 641 642 if (dln2->bpw != bpw) { 643 ret = dln2_spi_set_bpw(dln2, bpw); 644 if (ret < 0) 645 return ret; 646 647 dln2->bpw = bpw; 648 } 649 650 return dln2_spi_enable(dln2, true); 651 } 652 653 static int dln2_spi_transfer_one(struct spi_controller *host, 654 struct spi_device *spi, 655 struct spi_transfer *xfer) 656 { 657 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 658 int status; 659 u8 attr = 0; 660 661 status = dln2_spi_transfer_setup(dln2, xfer->speed_hz, 662 xfer->bits_per_word, 663 spi->mode); 664 if (status < 0) { 665 dev_err(&dln2->pdev->dev, "Cannot setup transfer\n"); 666 return status; 667 } 668 669 if (!xfer->cs_change && !spi_transfer_is_last(host, xfer)) 670 attr = DLN2_SPI_ATTR_LEAVE_SS_LOW; 671 672 status = dln2_spi_rdwr(dln2, xfer->tx_buf, xfer->rx_buf, 673 xfer->len, attr); 674 if (status < 0) 675 dev_err(&dln2->pdev->dev, "write/read failed!\n"); 676 677 return status; 678 } 679 680 static int dln2_spi_probe(struct platform_device *pdev) 681 { 682 struct spi_controller *host; 683 struct dln2_spi *dln2; 684 struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev); 685 struct device *dev = &pdev->dev; 686 int ret; 687 688 host = spi_alloc_host(&pdev->dev, sizeof(*dln2)); 689 if (!host) 690 return -ENOMEM; 691 692 device_set_node(&host->dev, dev_fwnode(dev)); 693 694 platform_set_drvdata(pdev, host); 695 696 dln2 = spi_controller_get_devdata(host); 697 698 dln2->buf = devm_kmalloc(&pdev->dev, DLN2_SPI_BUF_SIZE, GFP_KERNEL); 699 if (!dln2->buf) { 700 ret = -ENOMEM; 701 goto exit_free_host; 702 } 703 704 dln2->host = host; 705 dln2->pdev = pdev; 706 dln2->port = pdata->port; 707 /* cs/mode can never be 0xff, so the first transfer will set them */ 708 dln2->cs = 0xff; 709 dln2->mode = 0xff; 710 711 /* disable SPI module before continuing with the setup */ 712 ret = dln2_spi_enable(dln2, false); 713 if (ret < 0) { 714 dev_err(&pdev->dev, "Failed to disable SPI module\n"); 715 goto exit_free_host; 716 } 717 718 ret = dln2_spi_get_cs_num(dln2, &host->num_chipselect); 719 if (ret < 0) { 720 dev_err(&pdev->dev, "Failed to get number of CS pins\n"); 721 goto exit_free_host; 722 } 723 724 ret = dln2_spi_get_speed_range(dln2, 725 &host->min_speed_hz, 726 &host->max_speed_hz); 727 if (ret < 0) { 728 dev_err(&pdev->dev, "Failed to read bus min/max freqs\n"); 729 goto exit_free_host; 730 } 731 732 ret = dln2_spi_get_supported_frame_sizes(dln2, 733 &host->bits_per_word_mask); 734 if (ret < 0) { 735 dev_err(&pdev->dev, "Failed to read supported frame sizes\n"); 736 goto exit_free_host; 737 } 738 739 ret = dln2_spi_cs_enable_all(dln2, true); 740 if (ret < 0) { 741 dev_err(&pdev->dev, "Failed to enable CS pins\n"); 742 goto exit_free_host; 743 } 744 745 host->bus_num = -1; 746 host->mode_bits = SPI_CPOL | SPI_CPHA; 747 host->prepare_message = dln2_spi_prepare_message; 748 host->transfer_one = dln2_spi_transfer_one; 749 host->auto_runtime_pm = true; 750 751 /* enable SPI module, we're good to go */ 752 ret = dln2_spi_enable(dln2, true); 753 if (ret < 0) { 754 dev_err(&pdev->dev, "Failed to enable SPI module\n"); 755 goto exit_free_host; 756 } 757 758 pm_runtime_set_autosuspend_delay(&pdev->dev, 759 DLN2_RPM_AUTOSUSPEND_TIMEOUT); 760 pm_runtime_use_autosuspend(&pdev->dev); 761 pm_runtime_set_active(&pdev->dev); 762 pm_runtime_enable(&pdev->dev); 763 764 ret = devm_spi_register_controller(&pdev->dev, host); 765 if (ret < 0) { 766 dev_err(&pdev->dev, "Failed to register host\n"); 767 goto exit_register; 768 } 769 770 return ret; 771 772 exit_register: 773 pm_runtime_disable(&pdev->dev); 774 pm_runtime_set_suspended(&pdev->dev); 775 776 if (dln2_spi_enable(dln2, false) < 0) 777 dev_err(&pdev->dev, "Failed to disable SPI module\n"); 778 exit_free_host: 779 spi_controller_put(host); 780 781 return ret; 782 } 783 784 static void dln2_spi_remove(struct platform_device *pdev) 785 { 786 struct spi_controller *host = platform_get_drvdata(pdev); 787 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 788 789 pm_runtime_disable(&pdev->dev); 790 791 if (dln2_spi_enable(dln2, false) < 0) 792 dev_err(&pdev->dev, "Failed to disable SPI module\n"); 793 } 794 795 #ifdef CONFIG_PM_SLEEP 796 static int dln2_spi_suspend(struct device *dev) 797 { 798 int ret; 799 struct spi_controller *host = dev_get_drvdata(dev); 800 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 801 802 ret = spi_controller_suspend(host); 803 if (ret < 0) 804 return ret; 805 806 if (!pm_runtime_suspended(dev)) { 807 ret = dln2_spi_enable(dln2, false); 808 if (ret < 0) 809 return ret; 810 } 811 812 /* 813 * USB power may be cut off during sleep. Resetting the following 814 * parameters will force the board to be set up before first transfer. 815 */ 816 dln2->cs = 0xff; 817 dln2->speed = 0; 818 dln2->bpw = 0; 819 dln2->mode = 0xff; 820 821 return 0; 822 } 823 824 static int dln2_spi_resume(struct device *dev) 825 { 826 int ret; 827 struct spi_controller *host = dev_get_drvdata(dev); 828 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 829 830 if (!pm_runtime_suspended(dev)) { 831 ret = dln2_spi_cs_enable_all(dln2, true); 832 if (ret < 0) 833 return ret; 834 835 ret = dln2_spi_enable(dln2, true); 836 if (ret < 0) 837 return ret; 838 } 839 840 return spi_controller_resume(host); 841 } 842 #endif /* CONFIG_PM_SLEEP */ 843 844 #ifdef CONFIG_PM 845 static int dln2_spi_runtime_suspend(struct device *dev) 846 { 847 struct spi_controller *host = dev_get_drvdata(dev); 848 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 849 850 return dln2_spi_enable(dln2, false); 851 } 852 853 static int dln2_spi_runtime_resume(struct device *dev) 854 { 855 struct spi_controller *host = dev_get_drvdata(dev); 856 struct dln2_spi *dln2 = spi_controller_get_devdata(host); 857 858 return dln2_spi_enable(dln2, true); 859 } 860 #endif /* CONFIG_PM */ 861 862 static const struct dev_pm_ops dln2_spi_pm = { 863 SET_SYSTEM_SLEEP_PM_OPS(dln2_spi_suspend, dln2_spi_resume) 864 SET_RUNTIME_PM_OPS(dln2_spi_runtime_suspend, 865 dln2_spi_runtime_resume, NULL) 866 }; 867 868 static struct platform_driver spi_dln2_driver = { 869 .driver = { 870 .name = "dln2-spi", 871 .pm = &dln2_spi_pm, 872 }, 873 .probe = dln2_spi_probe, 874 .remove = dln2_spi_remove, 875 }; 876 module_platform_driver(spi_dln2_driver); 877 878 MODULE_DESCRIPTION("Driver for the Diolan DLN2 SPI host interface"); 879 MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>"); 880 MODULE_LICENSE("GPL v2"); 881 MODULE_ALIAS("platform:dln2-spi"); 882