1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * au1550 psc spi controller driver 4 * may work also with au1200, au1210, au1250 5 * will not work on au1000, au1100 and au1500 (no full spi controller there) 6 * 7 * Copyright (c) 2006 ATRON electronic GmbH 8 * Author: Jan Nikitenko <jan.nikitenko@gmail.com> 9 */ 10 11 #include <linux/init.h> 12 #include <linux/interrupt.h> 13 #include <linux/slab.h> 14 #include <linux/errno.h> 15 #include <linux/module.h> 16 #include <linux/device.h> 17 #include <linux/platform_device.h> 18 #include <linux/resource.h> 19 #include <linux/spi/spi.h> 20 #include <linux/spi/spi_bitbang.h> 21 #include <linux/dma-mapping.h> 22 #include <linux/completion.h> 23 #include <asm/mach-au1x00/au1000.h> 24 #include <asm/mach-au1x00/au1xxx_psc.h> 25 #include <asm/mach-au1x00/au1xxx_dbdma.h> 26 27 #include <asm/mach-au1x00/au1550_spi.h> 28 29 static unsigned int usedma = 1; 30 module_param(usedma, uint, 0644); 31 32 /* 33 #define AU1550_SPI_DEBUG_LOOPBACK 34 */ 35 36 37 #define AU1550_SPI_DBDMA_DESCRIPTORS 1 38 #define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U 39 40 struct au1550_spi { 41 struct spi_bitbang bitbang; 42 43 volatile psc_spi_t __iomem *regs; 44 int irq; 45 46 unsigned int len; 47 unsigned int tx_count; 48 unsigned int rx_count; 49 const u8 *tx; 50 u8 *rx; 51 52 void (*rx_word)(struct au1550_spi *hw); 53 void (*tx_word)(struct au1550_spi *hw); 54 int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); 55 irqreturn_t (*irq_callback)(struct au1550_spi *hw); 56 57 struct completion host_done; 58 59 unsigned int usedma; 60 u32 dma_tx_id; 61 u32 dma_rx_id; 62 u32 dma_tx_ch; 63 u32 dma_rx_ch; 64 65 u8 *dma_rx_tmpbuf; 66 unsigned int dma_rx_tmpbuf_size; 67 u32 dma_rx_tmpbuf_addr; 68 69 struct spi_controller *host; 70 struct device *dev; 71 struct au1550_spi_info *pdata; 72 struct resource *ioarea; 73 }; 74 75 76 /* we use an 8-bit memory device for dma transfers to/from spi fifo */ 77 static dbdev_tab_t au1550_spi_mem_dbdev = { 78 .dev_id = DBDMA_MEM_CHAN, 79 .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC, 80 .dev_tsize = 0, 81 .dev_devwidth = 8, 82 .dev_physaddr = 0x00000000, 83 .dev_intlevel = 0, 84 .dev_intpolarity = 0 85 }; 86 87 static int ddma_memid; /* id to above mem dma device */ 88 89 static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); 90 91 92 /* 93 * compute BRG and DIV bits to setup spi clock based on main input clock rate 94 * that was specified in platform data structure 95 * according to au1550 datasheet: 96 * psc_tempclk = psc_mainclk / (2 << DIV) 97 * spiclk = psc_tempclk / (2 * (BRG + 1)) 98 * BRG valid range is 4..63 99 * DIV valid range is 0..3 100 */ 101 static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned int speed_hz) 102 { 103 u32 mainclk_hz = hw->pdata->mainclk_hz; 104 u32 div, brg; 105 106 for (div = 0; div < 4; div++) { 107 brg = mainclk_hz / speed_hz / (4 << div); 108 /* now we have BRG+1 in brg, so count with that */ 109 if (brg < (4 + 1)) { 110 brg = (4 + 1); /* speed_hz too big */ 111 break; /* set lowest brg (div is == 0) */ 112 } 113 if (brg <= (63 + 1)) 114 break; /* we have valid brg and div */ 115 } 116 if (div == 4) { 117 div = 3; /* speed_hz too small */ 118 brg = (63 + 1); /* set highest brg and div */ 119 } 120 brg--; 121 return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div); 122 } 123 124 static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw) 125 { 126 hw->regs->psc_spimsk = 127 PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO 128 | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO 129 | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD; 130 wmb(); /* drain writebuffer */ 131 132 hw->regs->psc_spievent = 133 PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO 134 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO 135 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD; 136 wmb(); /* drain writebuffer */ 137 } 138 139 static void au1550_spi_reset_fifos(struct au1550_spi *hw) 140 { 141 u32 pcr; 142 143 hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC; 144 wmb(); /* drain writebuffer */ 145 do { 146 pcr = hw->regs->psc_spipcr; 147 wmb(); /* drain writebuffer */ 148 } while (pcr != 0); 149 } 150 151 /* 152 * dma transfers are used for the most common spi word size of 8-bits 153 * we cannot easily change already set up dma channels' width, so if we wanted 154 * dma support for more than 8-bit words (up to 24 bits), we would need to 155 * setup dma channels from scratch on each spi transfer, based on bits_per_word 156 * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits 157 * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode 158 * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set() 159 */ 160 static void au1550_spi_chipsel(struct spi_device *spi, int value) 161 { 162 struct au1550_spi *hw = spi_controller_get_devdata(spi->controller); 163 unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; 164 u32 cfg, stat; 165 166 switch (value) { 167 case BITBANG_CS_INACTIVE: 168 if (hw->pdata->deactivate_cs) 169 hw->pdata->deactivate_cs(hw->pdata, spi_get_chipselect(spi, 0), 170 cspol); 171 break; 172 173 case BITBANG_CS_ACTIVE: 174 au1550_spi_bits_handlers_set(hw, spi->bits_per_word); 175 176 cfg = hw->regs->psc_spicfg; 177 wmb(); /* drain writebuffer */ 178 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; 179 wmb(); /* drain writebuffer */ 180 181 if (spi->mode & SPI_CPOL) 182 cfg |= PSC_SPICFG_BI; 183 else 184 cfg &= ~PSC_SPICFG_BI; 185 if (spi->mode & SPI_CPHA) 186 cfg &= ~PSC_SPICFG_CDE; 187 else 188 cfg |= PSC_SPICFG_CDE; 189 190 if (spi->mode & SPI_LSB_FIRST) 191 cfg |= PSC_SPICFG_MLF; 192 else 193 cfg &= ~PSC_SPICFG_MLF; 194 195 if (hw->usedma && spi->bits_per_word <= 8) 196 cfg &= ~PSC_SPICFG_DD_DISABLE; 197 else 198 cfg |= PSC_SPICFG_DD_DISABLE; 199 cfg = PSC_SPICFG_CLR_LEN(cfg); 200 cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word); 201 202 cfg = PSC_SPICFG_CLR_BAUD(cfg); 203 cfg &= ~PSC_SPICFG_SET_DIV(3); 204 cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz); 205 206 hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE; 207 wmb(); /* drain writebuffer */ 208 do { 209 stat = hw->regs->psc_spistat; 210 wmb(); /* drain writebuffer */ 211 } while ((stat & PSC_SPISTAT_DR) == 0); 212 213 if (hw->pdata->activate_cs) 214 hw->pdata->activate_cs(hw->pdata, spi_get_chipselect(spi, 0), 215 cspol); 216 break; 217 } 218 } 219 220 static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) 221 { 222 struct au1550_spi *hw = spi_controller_get_devdata(spi->controller); 223 unsigned int bpw, hz; 224 u32 cfg, stat; 225 226 if (t) { 227 bpw = t->bits_per_word; 228 hz = t->speed_hz; 229 } else { 230 bpw = spi->bits_per_word; 231 hz = spi->max_speed_hz; 232 } 233 234 if (!hz) 235 return -EINVAL; 236 237 au1550_spi_bits_handlers_set(hw, spi->bits_per_word); 238 239 cfg = hw->regs->psc_spicfg; 240 wmb(); /* drain writebuffer */ 241 hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; 242 wmb(); /* drain writebuffer */ 243 244 if (hw->usedma && bpw <= 8) 245 cfg &= ~PSC_SPICFG_DD_DISABLE; 246 else 247 cfg |= PSC_SPICFG_DD_DISABLE; 248 cfg = PSC_SPICFG_CLR_LEN(cfg); 249 cfg |= PSC_SPICFG_SET_LEN(bpw); 250 251 cfg = PSC_SPICFG_CLR_BAUD(cfg); 252 cfg &= ~PSC_SPICFG_SET_DIV(3); 253 cfg |= au1550_spi_baudcfg(hw, hz); 254 255 hw->regs->psc_spicfg = cfg; 256 wmb(); /* drain writebuffer */ 257 258 if (cfg & PSC_SPICFG_DE_ENABLE) { 259 do { 260 stat = hw->regs->psc_spistat; 261 wmb(); /* drain writebuffer */ 262 } while ((stat & PSC_SPISTAT_DR) == 0); 263 } 264 265 au1550_spi_reset_fifos(hw); 266 au1550_spi_mask_ack_all(hw); 267 return 0; 268 } 269 270 /* 271 * for dma spi transfers, we have to setup rx channel, otherwise there is 272 * no reliable way how to recognize that spi transfer is done 273 * dma complete callbacks are called before real spi transfer is finished 274 * and if only tx dma channel is set up (and rx fifo overflow event masked) 275 * spi host done event irq is not generated unless rx fifo is empty (emptied) 276 * so we need rx tmp buffer to use for rx dma if user does not provide one 277 */ 278 static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned int size) 279 { 280 hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL); 281 if (!hw->dma_rx_tmpbuf) 282 return -ENOMEM; 283 hw->dma_rx_tmpbuf_size = size; 284 hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf, 285 size, DMA_FROM_DEVICE); 286 if (dma_mapping_error(hw->dev, hw->dma_rx_tmpbuf_addr)) { 287 kfree(hw->dma_rx_tmpbuf); 288 hw->dma_rx_tmpbuf = 0; 289 hw->dma_rx_tmpbuf_size = 0; 290 return -EFAULT; 291 } 292 return 0; 293 } 294 295 static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw) 296 { 297 dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr, 298 hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE); 299 kfree(hw->dma_rx_tmpbuf); 300 hw->dma_rx_tmpbuf = 0; 301 hw->dma_rx_tmpbuf_size = 0; 302 } 303 304 static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) 305 { 306 struct au1550_spi *hw = spi_controller_get_devdata(spi->controller); 307 dma_addr_t dma_tx_addr; 308 dma_addr_t dma_rx_addr; 309 u32 res; 310 311 hw->len = t->len; 312 hw->tx_count = 0; 313 hw->rx_count = 0; 314 315 hw->tx = t->tx_buf; 316 hw->rx = t->rx_buf; 317 dma_tx_addr = t->tx_dma; 318 dma_rx_addr = t->rx_dma; 319 320 /* 321 * check if buffers are already dma mapped, map them otherwise: 322 * - first map the TX buffer, so cache data gets written to memory 323 * - then map the RX buffer, so that cache entries (with 324 * soon-to-be-stale data) get removed 325 * use rx buffer in place of tx if tx buffer was not provided 326 * use temp rx buffer (preallocated or realloc to fit) for rx dma 327 */ 328 if (t->tx_buf) { 329 if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ 330 dma_tx_addr = dma_map_single(hw->dev, 331 (void *)t->tx_buf, 332 t->len, DMA_TO_DEVICE); 333 if (dma_mapping_error(hw->dev, dma_tx_addr)) 334 dev_err(hw->dev, "tx dma map error\n"); 335 } 336 } 337 338 if (t->rx_buf) { 339 if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ 340 dma_rx_addr = dma_map_single(hw->dev, 341 (void *)t->rx_buf, 342 t->len, DMA_FROM_DEVICE); 343 if (dma_mapping_error(hw->dev, dma_rx_addr)) 344 dev_err(hw->dev, "rx dma map error\n"); 345 } 346 } else { 347 if (t->len > hw->dma_rx_tmpbuf_size) { 348 int ret; 349 350 au1550_spi_dma_rxtmp_free(hw); 351 ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len, 352 AU1550_SPI_DMA_RXTMP_MINSIZE)); 353 if (ret < 0) 354 return ret; 355 } 356 hw->rx = hw->dma_rx_tmpbuf; 357 dma_rx_addr = hw->dma_rx_tmpbuf_addr; 358 dma_sync_single_for_device(hw->dev, dma_rx_addr, 359 t->len, DMA_FROM_DEVICE); 360 } 361 362 if (!t->tx_buf) { 363 dma_sync_single_for_device(hw->dev, dma_rx_addr, 364 t->len, DMA_BIDIRECTIONAL); 365 hw->tx = hw->rx; 366 } 367 368 /* put buffers on the ring */ 369 res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), 370 t->len, DDMA_FLAGS_IE); 371 if (!res) 372 dev_err(hw->dev, "rx dma put dest error\n"); 373 374 res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), 375 t->len, DDMA_FLAGS_IE); 376 if (!res) 377 dev_err(hw->dev, "tx dma put source error\n"); 378 379 au1xxx_dbdma_start(hw->dma_rx_ch); 380 au1xxx_dbdma_start(hw->dma_tx_ch); 381 382 /* by default enable nearly all events interrupt */ 383 hw->regs->psc_spimsk = PSC_SPIMSK_SD; 384 wmb(); /* drain writebuffer */ 385 386 /* start the transfer */ 387 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 388 wmb(); /* drain writebuffer */ 389 390 wait_for_completion(&hw->host_done); 391 392 au1xxx_dbdma_stop(hw->dma_tx_ch); 393 au1xxx_dbdma_stop(hw->dma_rx_ch); 394 395 if (!t->rx_buf) { 396 /* using the temporal preallocated and premapped buffer */ 397 dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len, 398 DMA_FROM_DEVICE); 399 } 400 /* unmap buffers if mapped above */ 401 if (t->rx_buf && t->rx_dma == 0) 402 dma_unmap_single(hw->dev, dma_rx_addr, t->len, 403 DMA_FROM_DEVICE); 404 if (t->tx_buf && t->tx_dma == 0) 405 dma_unmap_single(hw->dev, dma_tx_addr, t->len, 406 DMA_TO_DEVICE); 407 408 return min(hw->rx_count, hw->tx_count); 409 } 410 411 static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) 412 { 413 u32 stat, evnt; 414 415 stat = hw->regs->psc_spistat; 416 evnt = hw->regs->psc_spievent; 417 wmb(); /* drain writebuffer */ 418 if ((stat & PSC_SPISTAT_DI) == 0) { 419 dev_err(hw->dev, "Unexpected IRQ!\n"); 420 return IRQ_NONE; 421 } 422 423 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO 424 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO 425 | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) 426 != 0) { 427 /* 428 * due to an spi error we consider transfer as done, 429 * so mask all events until before next transfer start 430 * and stop the possibly running dma immediately 431 */ 432 au1550_spi_mask_ack_all(hw); 433 au1xxx_dbdma_stop(hw->dma_rx_ch); 434 au1xxx_dbdma_stop(hw->dma_tx_ch); 435 436 /* get number of transferred bytes */ 437 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch); 438 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch); 439 440 au1xxx_dbdma_reset(hw->dma_rx_ch); 441 au1xxx_dbdma_reset(hw->dma_tx_ch); 442 au1550_spi_reset_fifos(hw); 443 444 if (evnt == PSC_SPIEVNT_RO) 445 dev_err(hw->dev, 446 "dma transfer: receive FIFO overflow!\n"); 447 else 448 dev_err(hw->dev, 449 "dma transfer: unexpected SPI error (event=0x%x stat=0x%x)!\n", 450 evnt, stat); 451 452 complete(&hw->host_done); 453 return IRQ_HANDLED; 454 } 455 456 if ((evnt & PSC_SPIEVNT_MD) != 0) { 457 /* transfer completed successfully */ 458 au1550_spi_mask_ack_all(hw); 459 hw->rx_count = hw->len; 460 hw->tx_count = hw->len; 461 complete(&hw->host_done); 462 } 463 return IRQ_HANDLED; 464 } 465 466 467 /* routines to handle different word sizes in pio mode */ 468 #define AU1550_SPI_RX_WORD(size, mask) \ 469 static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \ 470 { \ 471 u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \ 472 wmb(); /* drain writebuffer */ \ 473 if (hw->rx) { \ 474 *(u##size *)hw->rx = (u##size)fifoword; \ 475 hw->rx += (size) / 8; \ 476 } \ 477 hw->rx_count += (size) / 8; \ 478 } 479 480 #define AU1550_SPI_TX_WORD(size, mask) \ 481 static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \ 482 { \ 483 u32 fifoword = 0; \ 484 if (hw->tx) { \ 485 fifoword = *(u##size *)hw->tx & (u32)(mask); \ 486 hw->tx += (size) / 8; \ 487 } \ 488 hw->tx_count += (size) / 8; \ 489 if (hw->tx_count >= hw->len) \ 490 fifoword |= PSC_SPITXRX_LC; \ 491 hw->regs->psc_spitxrx = fifoword; \ 492 wmb(); /* drain writebuffer */ \ 493 } 494 495 AU1550_SPI_RX_WORD(8, 0xff) 496 AU1550_SPI_RX_WORD(16, 0xffff) 497 AU1550_SPI_RX_WORD(32, 0xffffff) 498 AU1550_SPI_TX_WORD(8, 0xff) 499 AU1550_SPI_TX_WORD(16, 0xffff) 500 AU1550_SPI_TX_WORD(32, 0xffffff) 501 502 static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) 503 { 504 u32 stat, mask; 505 struct au1550_spi *hw = spi_controller_get_devdata(spi->controller); 506 507 hw->tx = t->tx_buf; 508 hw->rx = t->rx_buf; 509 hw->len = t->len; 510 hw->tx_count = 0; 511 hw->rx_count = 0; 512 513 /* by default enable nearly all events after filling tx fifo */ 514 mask = PSC_SPIMSK_SD; 515 516 /* fill the transmit FIFO */ 517 while (hw->tx_count < hw->len) { 518 519 hw->tx_word(hw); 520 521 if (hw->tx_count >= hw->len) { 522 /* mask tx fifo request interrupt as we are done */ 523 mask |= PSC_SPIMSK_TR; 524 } 525 526 stat = hw->regs->psc_spistat; 527 wmb(); /* drain writebuffer */ 528 if (stat & PSC_SPISTAT_TF) 529 break; 530 } 531 532 /* enable event interrupts */ 533 hw->regs->psc_spimsk = mask; 534 wmb(); /* drain writebuffer */ 535 536 /* start the transfer */ 537 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 538 wmb(); /* drain writebuffer */ 539 540 wait_for_completion(&hw->host_done); 541 542 return min(hw->rx_count, hw->tx_count); 543 } 544 545 static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) 546 { 547 int busy; 548 u32 stat, evnt; 549 550 stat = hw->regs->psc_spistat; 551 evnt = hw->regs->psc_spievent; 552 wmb(); /* drain writebuffer */ 553 if ((stat & PSC_SPISTAT_DI) == 0) { 554 dev_err(hw->dev, "Unexpected IRQ!\n"); 555 return IRQ_NONE; 556 } 557 558 if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO 559 | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO 560 | PSC_SPIEVNT_SD)) 561 != 0) { 562 /* 563 * due to an error we consider transfer as done, 564 * so mask all events until before next transfer start 565 */ 566 au1550_spi_mask_ack_all(hw); 567 au1550_spi_reset_fifos(hw); 568 dev_err(hw->dev, 569 "pio transfer: unexpected SPI error (event=0x%x stat=0x%x)!\n", 570 evnt, stat); 571 complete(&hw->host_done); 572 return IRQ_HANDLED; 573 } 574 575 /* 576 * while there is something to read from rx fifo 577 * or there is a space to write to tx fifo: 578 */ 579 do { 580 busy = 0; 581 stat = hw->regs->psc_spistat; 582 wmb(); /* drain writebuffer */ 583 584 /* 585 * Take care to not let the Rx FIFO overflow. 586 * 587 * We only write a byte if we have read one at least. Initially, 588 * the write fifo is full, so we should read from the read fifo 589 * first. 590 * In case we miss a word from the read fifo, we should get a 591 * RO event and should back out. 592 */ 593 if (!(stat & PSC_SPISTAT_RE) && hw->rx_count < hw->len) { 594 hw->rx_word(hw); 595 busy = 1; 596 597 if (!(stat & PSC_SPISTAT_TF) && hw->tx_count < hw->len) 598 hw->tx_word(hw); 599 } 600 } while (busy); 601 602 hw->regs->psc_spievent = PSC_SPIEVNT_RR | PSC_SPIEVNT_TR; 603 wmb(); /* drain writebuffer */ 604 605 /* 606 * Restart the SPI transmission in case of a transmit underflow. 607 * This seems to work despite the notes in the Au1550 data book 608 * of Figure 8-4 with flowchart for SPI host operation: 609 * 610 * """Note 1: An XFR Error Interrupt occurs, unless masked, 611 * for any of the following events: Tx FIFO Underflow, 612 * Rx FIFO Overflow, or Multiple-host Error 613 * Note 2: In case of a Tx Underflow Error, all zeroes are 614 * transmitted.""" 615 * 616 * By simply restarting the spi transfer on Tx Underflow Error, 617 * we assume that spi transfer was paused instead of zeroes 618 * transmittion mentioned in the Note 2 of Au1550 data book. 619 */ 620 if (evnt & PSC_SPIEVNT_TU) { 621 hw->regs->psc_spievent = PSC_SPIEVNT_TU | PSC_SPIEVNT_MD; 622 wmb(); /* drain writebuffer */ 623 hw->regs->psc_spipcr = PSC_SPIPCR_MS; 624 wmb(); /* drain writebuffer */ 625 } 626 627 if (hw->rx_count >= hw->len) { 628 /* transfer completed successfully */ 629 au1550_spi_mask_ack_all(hw); 630 complete(&hw->host_done); 631 } 632 return IRQ_HANDLED; 633 } 634 635 static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) 636 { 637 struct au1550_spi *hw = spi_controller_get_devdata(spi->controller); 638 639 return hw->txrx_bufs(spi, t); 640 } 641 642 static irqreturn_t au1550_spi_irq(int irq, void *dev) 643 { 644 struct au1550_spi *hw = dev; 645 646 return hw->irq_callback(hw); 647 } 648 649 static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) 650 { 651 if (bpw <= 8) { 652 if (hw->usedma) { 653 hw->txrx_bufs = &au1550_spi_dma_txrxb; 654 hw->irq_callback = &au1550_spi_dma_irq_callback; 655 } else { 656 hw->rx_word = &au1550_spi_rx_word_8; 657 hw->tx_word = &au1550_spi_tx_word_8; 658 hw->txrx_bufs = &au1550_spi_pio_txrxb; 659 hw->irq_callback = &au1550_spi_pio_irq_callback; 660 } 661 } else if (bpw <= 16) { 662 hw->rx_word = &au1550_spi_rx_word_16; 663 hw->tx_word = &au1550_spi_tx_word_16; 664 hw->txrx_bufs = &au1550_spi_pio_txrxb; 665 hw->irq_callback = &au1550_spi_pio_irq_callback; 666 } else { 667 hw->rx_word = &au1550_spi_rx_word_32; 668 hw->tx_word = &au1550_spi_tx_word_32; 669 hw->txrx_bufs = &au1550_spi_pio_txrxb; 670 hw->irq_callback = &au1550_spi_pio_irq_callback; 671 } 672 } 673 674 static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) 675 { 676 u32 stat, cfg; 677 678 /* set up the PSC for SPI mode */ 679 hw->regs->psc_ctrl = PSC_CTRL_DISABLE; 680 wmb(); /* drain writebuffer */ 681 hw->regs->psc_sel = PSC_SEL_PS_SPIMODE; 682 wmb(); /* drain writebuffer */ 683 684 hw->regs->psc_spicfg = 0; 685 wmb(); /* drain writebuffer */ 686 687 hw->regs->psc_ctrl = PSC_CTRL_ENABLE; 688 wmb(); /* drain writebuffer */ 689 690 do { 691 stat = hw->regs->psc_spistat; 692 wmb(); /* drain writebuffer */ 693 } while ((stat & PSC_SPISTAT_SR) == 0); 694 695 696 cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE; 697 cfg |= PSC_SPICFG_SET_LEN(8); 698 cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8; 699 /* use minimal allowed brg and div values as initial setting: */ 700 cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0); 701 702 #ifdef AU1550_SPI_DEBUG_LOOPBACK 703 cfg |= PSC_SPICFG_LB; 704 #endif 705 706 hw->regs->psc_spicfg = cfg; 707 wmb(); /* drain writebuffer */ 708 709 au1550_spi_mask_ack_all(hw); 710 711 hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE; 712 wmb(); /* drain writebuffer */ 713 714 do { 715 stat = hw->regs->psc_spistat; 716 wmb(); /* drain writebuffer */ 717 } while ((stat & PSC_SPISTAT_DR) == 0); 718 719 au1550_spi_reset_fifos(hw); 720 } 721 722 723 static int au1550_spi_probe(struct platform_device *pdev) 724 { 725 struct au1550_spi *hw; 726 struct spi_controller *host; 727 struct resource *r; 728 int err = 0; 729 730 host = spi_alloc_host(&pdev->dev, sizeof(struct au1550_spi)); 731 if (host == NULL) { 732 dev_err(&pdev->dev, "No memory for spi_controller\n"); 733 err = -ENOMEM; 734 goto err_nomem; 735 } 736 737 /* the spi->mode bits understood by this driver: */ 738 host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; 739 host->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24); 740 741 hw = spi_controller_get_devdata(host); 742 743 hw->host = host; 744 hw->pdata = dev_get_platdata(&pdev->dev); 745 hw->dev = &pdev->dev; 746 747 if (hw->pdata == NULL) { 748 dev_err(&pdev->dev, "No platform data supplied\n"); 749 err = -ENOENT; 750 goto err_no_pdata; 751 } 752 753 r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 754 if (!r) { 755 dev_err(&pdev->dev, "no IRQ\n"); 756 err = -ENODEV; 757 goto err_no_iores; 758 } 759 hw->irq = r->start; 760 761 hw->usedma = 0; 762 r = platform_get_resource(pdev, IORESOURCE_DMA, 0); 763 if (r) { 764 hw->dma_tx_id = r->start; 765 r = platform_get_resource(pdev, IORESOURCE_DMA, 1); 766 if (r) { 767 hw->dma_rx_id = r->start; 768 if (usedma && ddma_memid) { 769 if (pdev->dev.dma_mask == NULL) 770 dev_warn(&pdev->dev, "no dma mask\n"); 771 else 772 hw->usedma = 1; 773 } 774 } 775 } 776 777 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 778 if (!r) { 779 dev_err(&pdev->dev, "no mmio resource\n"); 780 err = -ENODEV; 781 goto err_no_iores; 782 } 783 784 hw->ioarea = request_mem_region(r->start, sizeof(psc_spi_t), 785 pdev->name); 786 if (!hw->ioarea) { 787 dev_err(&pdev->dev, "Cannot reserve iomem region\n"); 788 err = -ENXIO; 789 goto err_no_iores; 790 } 791 792 hw->regs = (psc_spi_t __iomem *)ioremap(r->start, sizeof(psc_spi_t)); 793 if (!hw->regs) { 794 dev_err(&pdev->dev, "cannot ioremap\n"); 795 err = -ENXIO; 796 goto err_ioremap; 797 } 798 799 platform_set_drvdata(pdev, hw); 800 801 init_completion(&hw->host_done); 802 803 hw->bitbang.ctlr = hw->host; 804 hw->bitbang.setup_transfer = au1550_spi_setupxfer; 805 hw->bitbang.chipselect = au1550_spi_chipsel; 806 hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; 807 808 if (hw->usedma) { 809 hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(ddma_memid, 810 hw->dma_tx_id, NULL, (void *)hw); 811 if (hw->dma_tx_ch == 0) { 812 dev_err(&pdev->dev, 813 "Cannot allocate tx dma channel\n"); 814 err = -ENXIO; 815 goto err_no_txdma; 816 } 817 au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8); 818 if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch, 819 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { 820 dev_err(&pdev->dev, 821 "Cannot allocate tx dma descriptors\n"); 822 err = -ENXIO; 823 goto err_no_txdma_descr; 824 } 825 826 827 hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, 828 ddma_memid, NULL, (void *)hw); 829 if (hw->dma_rx_ch == 0) { 830 dev_err(&pdev->dev, 831 "Cannot allocate rx dma channel\n"); 832 err = -ENXIO; 833 goto err_no_rxdma; 834 } 835 au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8); 836 if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch, 837 AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { 838 dev_err(&pdev->dev, 839 "Cannot allocate rx dma descriptors\n"); 840 err = -ENXIO; 841 goto err_no_rxdma_descr; 842 } 843 844 err = au1550_spi_dma_rxtmp_alloc(hw, 845 AU1550_SPI_DMA_RXTMP_MINSIZE); 846 if (err < 0) { 847 dev_err(&pdev->dev, 848 "Cannot allocate initial rx dma tmp buffer\n"); 849 goto err_dma_rxtmp_alloc; 850 } 851 } 852 853 au1550_spi_bits_handlers_set(hw, 8); 854 855 err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw); 856 if (err) { 857 dev_err(&pdev->dev, "Cannot claim IRQ\n"); 858 goto err_no_irq; 859 } 860 861 host->bus_num = pdev->id; 862 host->num_chipselect = hw->pdata->num_chipselect; 863 864 /* 865 * precompute valid range for spi freq - from au1550 datasheet: 866 * psc_tempclk = psc_mainclk / (2 << DIV) 867 * spiclk = psc_tempclk / (2 * (BRG + 1)) 868 * BRG valid range is 4..63 869 * DIV valid range is 0..3 870 * round the min and max frequencies to values that would still 871 * produce valid brg and div 872 */ 873 { 874 int min_div = (2 << 0) * (2 * (4 + 1)); 875 int max_div = (2 << 3) * (2 * (63 + 1)); 876 877 host->max_speed_hz = hw->pdata->mainclk_hz / min_div; 878 host->min_speed_hz = 879 hw->pdata->mainclk_hz / (max_div + 1) + 1; 880 } 881 882 au1550_spi_setup_psc_as_spi(hw); 883 884 err = spi_bitbang_start(&hw->bitbang); 885 if (err) { 886 dev_err(&pdev->dev, "Failed to register SPI host\n"); 887 goto err_register; 888 } 889 890 dev_info(&pdev->dev, 891 "spi host registered: bus_num=%d num_chipselect=%d\n", 892 host->bus_num, host->num_chipselect); 893 894 return 0; 895 896 err_register: 897 free_irq(hw->irq, hw); 898 899 err_no_irq: 900 au1550_spi_dma_rxtmp_free(hw); 901 902 err_dma_rxtmp_alloc: 903 err_no_rxdma_descr: 904 if (hw->usedma) 905 au1xxx_dbdma_chan_free(hw->dma_rx_ch); 906 907 err_no_rxdma: 908 err_no_txdma_descr: 909 if (hw->usedma) 910 au1xxx_dbdma_chan_free(hw->dma_tx_ch); 911 912 err_no_txdma: 913 iounmap((void __iomem *)hw->regs); 914 915 err_ioremap: 916 release_mem_region(r->start, sizeof(psc_spi_t)); 917 918 err_no_iores: 919 err_no_pdata: 920 spi_controller_put(hw->host); 921 922 err_nomem: 923 return err; 924 } 925 926 static void au1550_spi_remove(struct platform_device *pdev) 927 { 928 struct au1550_spi *hw = platform_get_drvdata(pdev); 929 930 dev_info(&pdev->dev, "spi host remove: bus_num=%d\n", 931 hw->host->bus_num); 932 933 spi_bitbang_stop(&hw->bitbang); 934 free_irq(hw->irq, hw); 935 iounmap((void __iomem *)hw->regs); 936 release_mem_region(hw->ioarea->start, sizeof(psc_spi_t)); 937 938 if (hw->usedma) { 939 au1550_spi_dma_rxtmp_free(hw); 940 au1xxx_dbdma_chan_free(hw->dma_rx_ch); 941 au1xxx_dbdma_chan_free(hw->dma_tx_ch); 942 } 943 944 spi_controller_put(hw->host); 945 } 946 947 /* work with hotplug and coldplug */ 948 MODULE_ALIAS("platform:au1550-spi"); 949 950 static struct platform_driver au1550_spi_drv = { 951 .probe = au1550_spi_probe, 952 .remove_new = au1550_spi_remove, 953 .driver = { 954 .name = "au1550-spi", 955 }, 956 }; 957 958 static int __init au1550_spi_init(void) 959 { 960 /* 961 * create memory device with 8 bits dev_devwidth 962 * needed for proper byte ordering to spi fifo 963 */ 964 switch (alchemy_get_cputype()) { 965 case ALCHEMY_CPU_AU1550: 966 case ALCHEMY_CPU_AU1200: 967 case ALCHEMY_CPU_AU1300: 968 break; 969 default: 970 return -ENODEV; 971 } 972 973 if (usedma) { 974 ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); 975 if (!ddma_memid) 976 printk(KERN_ERR "au1550-spi: cannot add memory dbdma device\n"); 977 } 978 return platform_driver_register(&au1550_spi_drv); 979 } 980 module_init(au1550_spi_init); 981 982 static void __exit au1550_spi_exit(void) 983 { 984 if (usedma && ddma_memid) 985 au1xxx_ddma_del_device(ddma_memid); 986 platform_driver_unregister(&au1550_spi_drv); 987 } 988 module_exit(au1550_spi_exit); 989 990 MODULE_DESCRIPTION("Au1550 PSC SPI Driver"); 991 MODULE_AUTHOR("Jan Nikitenko <jan.nikitenko@gmail.com>"); 992 MODULE_LICENSE("GPL"); 993