1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for Atmel QSPI Controller 4 * 5 * Copyright (C) 2015 Atmel Corporation 6 * Copyright (C) 2018 Cryptera A/S 7 * 8 * Author: Cyrille Pitchen <cyrille.pitchen@atmel.com> 9 * Author: Piotr Bugalski <bugalski.piotr@gmail.com> 10 * 11 * This driver is based on drivers/mtd/spi-nor/fsl-quadspi.c from Freescale. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/delay.h> 16 #include <linux/err.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/kernel.h> 20 #include <linux/module.h> 21 #include <linux/of.h> 22 #include <linux/of_platform.h> 23 #include <linux/platform_device.h> 24 #include <linux/spi/spi-mem.h> 25 26 /* QSPI register offsets */ 27 #define QSPI_CR 0x0000 /* Control Register */ 28 #define QSPI_MR 0x0004 /* Mode Register */ 29 #define QSPI_RD 0x0008 /* Receive Data Register */ 30 #define QSPI_TD 0x000c /* Transmit Data Register */ 31 #define QSPI_SR 0x0010 /* Status Register */ 32 #define QSPI_IER 0x0014 /* Interrupt Enable Register */ 33 #define QSPI_IDR 0x0018 /* Interrupt Disable Register */ 34 #define QSPI_IMR 0x001c /* Interrupt Mask Register */ 35 #define QSPI_SCR 0x0020 /* Serial Clock Register */ 36 37 #define QSPI_IAR 0x0030 /* Instruction Address Register */ 38 #define QSPI_ICR 0x0034 /* Instruction Code Register */ 39 #define QSPI_WICR 0x0034 /* Write Instruction Code Register */ 40 #define QSPI_IFR 0x0038 /* Instruction Frame Register */ 41 #define QSPI_RICR 0x003C /* Read Instruction Code Register */ 42 43 #define QSPI_SMR 0x0040 /* Scrambling Mode Register */ 44 #define QSPI_SKR 0x0044 /* Scrambling Key Register */ 45 46 #define QSPI_WPMR 0x00E4 /* Write Protection Mode Register */ 47 #define QSPI_WPSR 0x00E8 /* Write Protection Status Register */ 48 49 #define QSPI_VERSION 0x00FC /* Version Register */ 50 51 52 /* Bitfields in QSPI_CR (Control Register) */ 53 #define QSPI_CR_QSPIEN BIT(0) 54 #define QSPI_CR_QSPIDIS BIT(1) 55 #define QSPI_CR_SWRST BIT(7) 56 #define QSPI_CR_LASTXFER BIT(24) 57 58 /* Bitfields in QSPI_MR (Mode Register) */ 59 #define QSPI_MR_SMM BIT(0) 60 #define QSPI_MR_LLB BIT(1) 61 #define QSPI_MR_WDRBT BIT(2) 62 #define QSPI_MR_SMRM BIT(3) 63 #define QSPI_MR_CSMODE_MASK GENMASK(5, 4) 64 #define QSPI_MR_CSMODE_NOT_RELOADED (0 << 4) 65 #define QSPI_MR_CSMODE_LASTXFER (1 << 4) 66 #define QSPI_MR_CSMODE_SYSTEMATICALLY (2 << 4) 67 #define QSPI_MR_NBBITS_MASK GENMASK(11, 8) 68 #define QSPI_MR_NBBITS(n) ((((n) - 8) << 8) & QSPI_MR_NBBITS_MASK) 69 #define QSPI_MR_DLYBCT_MASK GENMASK(23, 16) 70 #define QSPI_MR_DLYBCT(n) (((n) << 16) & QSPI_MR_DLYBCT_MASK) 71 #define QSPI_MR_DLYCS_MASK GENMASK(31, 24) 72 #define QSPI_MR_DLYCS(n) (((n) << 24) & QSPI_MR_DLYCS_MASK) 73 74 /* Bitfields in QSPI_SR/QSPI_IER/QSPI_IDR/QSPI_IMR */ 75 #define QSPI_SR_RDRF BIT(0) 76 #define QSPI_SR_TDRE BIT(1) 77 #define QSPI_SR_TXEMPTY BIT(2) 78 #define QSPI_SR_OVRES BIT(3) 79 #define QSPI_SR_CSR BIT(8) 80 #define QSPI_SR_CSS BIT(9) 81 #define QSPI_SR_INSTRE BIT(10) 82 #define QSPI_SR_QSPIENS BIT(24) 83 84 #define QSPI_SR_CMD_COMPLETED (QSPI_SR_INSTRE | QSPI_SR_CSR) 85 86 /* Bitfields in QSPI_SCR (Serial Clock Register) */ 87 #define QSPI_SCR_CPOL BIT(0) 88 #define QSPI_SCR_CPHA BIT(1) 89 #define QSPI_SCR_SCBR_MASK GENMASK(15, 8) 90 #define QSPI_SCR_SCBR(n) (((n) << 8) & QSPI_SCR_SCBR_MASK) 91 #define QSPI_SCR_DLYBS_MASK GENMASK(23, 16) 92 #define QSPI_SCR_DLYBS(n) (((n) << 16) & QSPI_SCR_DLYBS_MASK) 93 94 /* Bitfields in QSPI_ICR (Read/Write Instruction Code Register) */ 95 #define QSPI_ICR_INST_MASK GENMASK(7, 0) 96 #define QSPI_ICR_INST(inst) (((inst) << 0) & QSPI_ICR_INST_MASK) 97 #define QSPI_ICR_OPT_MASK GENMASK(23, 16) 98 #define QSPI_ICR_OPT(opt) (((opt) << 16) & QSPI_ICR_OPT_MASK) 99 100 /* Bitfields in QSPI_IFR (Instruction Frame Register) */ 101 #define QSPI_IFR_WIDTH_MASK GENMASK(2, 0) 102 #define QSPI_IFR_WIDTH_SINGLE_BIT_SPI (0 << 0) 103 #define QSPI_IFR_WIDTH_DUAL_OUTPUT (1 << 0) 104 #define QSPI_IFR_WIDTH_QUAD_OUTPUT (2 << 0) 105 #define QSPI_IFR_WIDTH_DUAL_IO (3 << 0) 106 #define QSPI_IFR_WIDTH_QUAD_IO (4 << 0) 107 #define QSPI_IFR_WIDTH_DUAL_CMD (5 << 0) 108 #define QSPI_IFR_WIDTH_QUAD_CMD (6 << 0) 109 #define QSPI_IFR_INSTEN BIT(4) 110 #define QSPI_IFR_ADDREN BIT(5) 111 #define QSPI_IFR_OPTEN BIT(6) 112 #define QSPI_IFR_DATAEN BIT(7) 113 #define QSPI_IFR_OPTL_MASK GENMASK(9, 8) 114 #define QSPI_IFR_OPTL_1BIT (0 << 8) 115 #define QSPI_IFR_OPTL_2BIT (1 << 8) 116 #define QSPI_IFR_OPTL_4BIT (2 << 8) 117 #define QSPI_IFR_OPTL_8BIT (3 << 8) 118 #define QSPI_IFR_ADDRL BIT(10) 119 #define QSPI_IFR_TFRTYP_MEM BIT(12) 120 #define QSPI_IFR_SAMA5D2_WRITE_TRSFR BIT(13) 121 #define QSPI_IFR_CRM BIT(14) 122 #define QSPI_IFR_NBDUM_MASK GENMASK(20, 16) 123 #define QSPI_IFR_NBDUM(n) (((n) << 16) & QSPI_IFR_NBDUM_MASK) 124 #define QSPI_IFR_APBTFRTYP_READ BIT(24) /* Defined in SAM9X60 */ 125 126 /* Bitfields in QSPI_SMR (Scrambling Mode Register) */ 127 #define QSPI_SMR_SCREN BIT(0) 128 #define QSPI_SMR_RVDIS BIT(1) 129 130 /* Bitfields in QSPI_WPMR (Write Protection Mode Register) */ 131 #define QSPI_WPMR_WPEN BIT(0) 132 #define QSPI_WPMR_WPKEY_MASK GENMASK(31, 8) 133 #define QSPI_WPMR_WPKEY(wpkey) (((wpkey) << 8) & QSPI_WPMR_WPKEY_MASK) 134 135 /* Bitfields in QSPI_WPSR (Write Protection Status Register) */ 136 #define QSPI_WPSR_WPVS BIT(0) 137 #define QSPI_WPSR_WPVSRC_MASK GENMASK(15, 8) 138 #define QSPI_WPSR_WPVSRC(src) (((src) << 8) & QSPI_WPSR_WPVSRC) 139 140 struct atmel_qspi_caps { 141 bool has_qspick; 142 bool has_ricr; 143 }; 144 145 struct atmel_qspi { 146 void __iomem *regs; 147 void __iomem *mem; 148 struct clk *pclk; 149 struct clk *qspick; 150 struct platform_device *pdev; 151 const struct atmel_qspi_caps *caps; 152 u32 pending; 153 u32 mr; 154 u32 scr; 155 struct completion cmd_completion; 156 }; 157 158 struct atmel_qspi_mode { 159 u8 cmd_buswidth; 160 u8 addr_buswidth; 161 u8 data_buswidth; 162 u32 config; 163 }; 164 165 static const struct atmel_qspi_mode atmel_qspi_modes[] = { 166 { 1, 1, 1, QSPI_IFR_WIDTH_SINGLE_BIT_SPI }, 167 { 1, 1, 2, QSPI_IFR_WIDTH_DUAL_OUTPUT }, 168 { 1, 1, 4, QSPI_IFR_WIDTH_QUAD_OUTPUT }, 169 { 1, 2, 2, QSPI_IFR_WIDTH_DUAL_IO }, 170 { 1, 4, 4, QSPI_IFR_WIDTH_QUAD_IO }, 171 { 2, 2, 2, QSPI_IFR_WIDTH_DUAL_CMD }, 172 { 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD }, 173 }; 174 175 static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op, 176 const struct atmel_qspi_mode *mode) 177 { 178 if (op->cmd.buswidth != mode->cmd_buswidth) 179 return false; 180 181 if (op->addr.nbytes && op->addr.buswidth != mode->addr_buswidth) 182 return false; 183 184 if (op->data.nbytes && op->data.buswidth != mode->data_buswidth) 185 return false; 186 187 return true; 188 } 189 190 static int atmel_qspi_find_mode(const struct spi_mem_op *op) 191 { 192 u32 i; 193 194 for (i = 0; i < ARRAY_SIZE(atmel_qspi_modes); i++) 195 if (atmel_qspi_is_compatible(op, &atmel_qspi_modes[i])) 196 return i; 197 198 return -ENOTSUPP; 199 } 200 201 static bool atmel_qspi_supports_op(struct spi_mem *mem, 202 const struct spi_mem_op *op) 203 { 204 if (atmel_qspi_find_mode(op) < 0) 205 return false; 206 207 /* special case not supported by hardware */ 208 if (op->addr.nbytes == 2 && op->cmd.buswidth != op->addr.buswidth && 209 op->dummy.nbytes == 0) 210 return false; 211 212 return true; 213 } 214 215 static int atmel_qspi_set_cfg(struct atmel_qspi *aq, 216 const struct spi_mem_op *op, u32 *offset) 217 { 218 u32 iar, icr, ifr; 219 u32 dummy_cycles = 0; 220 int mode; 221 222 iar = 0; 223 icr = QSPI_ICR_INST(op->cmd.opcode); 224 ifr = QSPI_IFR_INSTEN; 225 226 mode = atmel_qspi_find_mode(op); 227 if (mode < 0) 228 return mode; 229 ifr |= atmel_qspi_modes[mode].config; 230 231 if (op->dummy.buswidth && op->dummy.nbytes) 232 dummy_cycles = op->dummy.nbytes * 8 / op->dummy.buswidth; 233 234 /* 235 * The controller allows 24 and 32-bit addressing while NAND-flash 236 * requires 16-bit long. Handling 8-bit long addresses is done using 237 * the option field. For the 16-bit addresses, the workaround depends 238 * of the number of requested dummy bits. If there are 8 or more dummy 239 * cycles, the address is shifted and sent with the first dummy byte. 240 * Otherwise opcode is disabled and the first byte of the address 241 * contains the command opcode (works only if the opcode and address 242 * use the same buswidth). The limitation is when the 16-bit address is 243 * used without enough dummy cycles and the opcode is using a different 244 * buswidth than the address. 245 */ 246 if (op->addr.buswidth) { 247 switch (op->addr.nbytes) { 248 case 0: 249 break; 250 case 1: 251 ifr |= QSPI_IFR_OPTEN | QSPI_IFR_OPTL_8BIT; 252 icr |= QSPI_ICR_OPT(op->addr.val & 0xff); 253 break; 254 case 2: 255 if (dummy_cycles < 8 / op->addr.buswidth) { 256 ifr &= ~QSPI_IFR_INSTEN; 257 ifr |= QSPI_IFR_ADDREN; 258 iar = (op->cmd.opcode << 16) | 259 (op->addr.val & 0xffff); 260 } else { 261 ifr |= QSPI_IFR_ADDREN; 262 iar = (op->addr.val << 8) & 0xffffff; 263 dummy_cycles -= 8 / op->addr.buswidth; 264 } 265 break; 266 case 3: 267 ifr |= QSPI_IFR_ADDREN; 268 iar = op->addr.val & 0xffffff; 269 break; 270 case 4: 271 ifr |= QSPI_IFR_ADDREN | QSPI_IFR_ADDRL; 272 iar = op->addr.val & 0x7ffffff; 273 break; 274 default: 275 return -ENOTSUPP; 276 } 277 } 278 279 /* offset of the data access in the QSPI memory space */ 280 *offset = iar; 281 282 /* Set number of dummy cycles */ 283 if (dummy_cycles) 284 ifr |= QSPI_IFR_NBDUM(dummy_cycles); 285 286 /* Set data enable */ 287 if (op->data.nbytes) 288 ifr |= QSPI_IFR_DATAEN; 289 290 /* 291 * If the QSPI controller is set in regular SPI mode, set it in 292 * Serial Memory Mode (SMM). 293 */ 294 if (aq->mr != QSPI_MR_SMM) { 295 writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); 296 aq->mr = QSPI_MR_SMM; 297 } 298 299 /* Clear pending interrupts */ 300 (void)readl_relaxed(aq->regs + QSPI_SR); 301 302 if (aq->caps->has_ricr) { 303 if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN) 304 ifr |= QSPI_IFR_APBTFRTYP_READ; 305 306 /* Set QSPI Instruction Frame registers */ 307 writel_relaxed(iar, aq->regs + QSPI_IAR); 308 if (op->data.dir == SPI_MEM_DATA_IN) 309 writel_relaxed(icr, aq->regs + QSPI_RICR); 310 else 311 writel_relaxed(icr, aq->regs + QSPI_WICR); 312 writel_relaxed(ifr, aq->regs + QSPI_IFR); 313 } else { 314 if (op->data.dir == SPI_MEM_DATA_OUT) 315 ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR; 316 317 /* Set QSPI Instruction Frame registers */ 318 writel_relaxed(iar, aq->regs + QSPI_IAR); 319 writel_relaxed(icr, aq->regs + QSPI_ICR); 320 writel_relaxed(ifr, aq->regs + QSPI_IFR); 321 } 322 323 return 0; 324 } 325 326 static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) 327 { 328 struct atmel_qspi *aq = spi_controller_get_devdata(mem->spi->master); 329 u32 sr, offset; 330 int err; 331 332 err = atmel_qspi_set_cfg(aq, op, &offset); 333 if (err) 334 return err; 335 336 /* Skip to the final steps if there is no data */ 337 if (op->data.nbytes) { 338 /* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */ 339 (void)readl_relaxed(aq->regs + QSPI_IFR); 340 341 /* Send/Receive data */ 342 if (op->data.dir == SPI_MEM_DATA_IN) 343 _memcpy_fromio(op->data.buf.in, aq->mem + offset, 344 op->data.nbytes); 345 else 346 _memcpy_toio(aq->mem + offset, op->data.buf.out, 347 op->data.nbytes); 348 349 /* Release the chip-select */ 350 writel_relaxed(QSPI_CR_LASTXFER, aq->regs + QSPI_CR); 351 } 352 353 /* Poll INSTRuction End status */ 354 sr = readl_relaxed(aq->regs + QSPI_SR); 355 if ((sr & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED) 356 return err; 357 358 /* Wait for INSTRuction End interrupt */ 359 reinit_completion(&aq->cmd_completion); 360 aq->pending = sr & QSPI_SR_CMD_COMPLETED; 361 writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IER); 362 if (!wait_for_completion_timeout(&aq->cmd_completion, 363 msecs_to_jiffies(1000))) 364 err = -ETIMEDOUT; 365 writel_relaxed(QSPI_SR_CMD_COMPLETED, aq->regs + QSPI_IDR); 366 367 return err; 368 } 369 370 static const char *atmel_qspi_get_name(struct spi_mem *spimem) 371 { 372 return dev_name(spimem->spi->dev.parent); 373 } 374 375 static const struct spi_controller_mem_ops atmel_qspi_mem_ops = { 376 .supports_op = atmel_qspi_supports_op, 377 .exec_op = atmel_qspi_exec_op, 378 .get_name = atmel_qspi_get_name 379 }; 380 381 static int atmel_qspi_setup(struct spi_device *spi) 382 { 383 struct spi_controller *ctrl = spi->master; 384 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 385 unsigned long src_rate; 386 u32 scbr; 387 388 if (ctrl->busy) 389 return -EBUSY; 390 391 if (!spi->max_speed_hz) 392 return -EINVAL; 393 394 src_rate = clk_get_rate(aq->pclk); 395 if (!src_rate) 396 return -EINVAL; 397 398 /* Compute the QSPI baudrate */ 399 scbr = DIV_ROUND_UP(src_rate, spi->max_speed_hz); 400 if (scbr > 0) 401 scbr--; 402 403 aq->scr = QSPI_SCR_SCBR(scbr); 404 writel_relaxed(aq->scr, aq->regs + QSPI_SCR); 405 406 return 0; 407 } 408 409 static void atmel_qspi_init(struct atmel_qspi *aq) 410 { 411 /* Reset the QSPI controller */ 412 writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR); 413 414 /* Set the QSPI controller by default in Serial Memory Mode */ 415 writel_relaxed(QSPI_MR_SMM, aq->regs + QSPI_MR); 416 aq->mr = QSPI_MR_SMM; 417 418 /* Enable the QSPI controller */ 419 writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR); 420 } 421 422 static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) 423 { 424 struct atmel_qspi *aq = dev_id; 425 u32 status, mask, pending; 426 427 status = readl_relaxed(aq->regs + QSPI_SR); 428 mask = readl_relaxed(aq->regs + QSPI_IMR); 429 pending = status & mask; 430 431 if (!pending) 432 return IRQ_NONE; 433 434 aq->pending |= pending; 435 if ((aq->pending & QSPI_SR_CMD_COMPLETED) == QSPI_SR_CMD_COMPLETED) 436 complete(&aq->cmd_completion); 437 438 return IRQ_HANDLED; 439 } 440 441 static int atmel_qspi_probe(struct platform_device *pdev) 442 { 443 struct spi_controller *ctrl; 444 struct atmel_qspi *aq; 445 struct resource *res; 446 int irq, err = 0; 447 448 ctrl = spi_alloc_master(&pdev->dev, sizeof(*aq)); 449 if (!ctrl) 450 return -ENOMEM; 451 452 ctrl->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; 453 ctrl->setup = atmel_qspi_setup; 454 ctrl->bus_num = -1; 455 ctrl->mem_ops = &atmel_qspi_mem_ops; 456 ctrl->num_chipselect = 1; 457 ctrl->dev.of_node = pdev->dev.of_node; 458 platform_set_drvdata(pdev, ctrl); 459 460 aq = spi_controller_get_devdata(ctrl); 461 462 init_completion(&aq->cmd_completion); 463 aq->pdev = pdev; 464 465 /* Map the registers */ 466 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base"); 467 aq->regs = devm_ioremap_resource(&pdev->dev, res); 468 if (IS_ERR(aq->regs)) { 469 dev_err(&pdev->dev, "missing registers\n"); 470 err = PTR_ERR(aq->regs); 471 goto exit; 472 } 473 474 /* Map the AHB memory */ 475 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mmap"); 476 aq->mem = devm_ioremap_resource(&pdev->dev, res); 477 if (IS_ERR(aq->mem)) { 478 dev_err(&pdev->dev, "missing AHB memory\n"); 479 err = PTR_ERR(aq->mem); 480 goto exit; 481 } 482 483 /* Get the peripheral clock */ 484 aq->pclk = devm_clk_get(&pdev->dev, "pclk"); 485 if (IS_ERR(aq->pclk)) 486 aq->pclk = devm_clk_get(&pdev->dev, NULL); 487 488 if (IS_ERR(aq->pclk)) { 489 dev_err(&pdev->dev, "missing peripheral clock\n"); 490 err = PTR_ERR(aq->pclk); 491 goto exit; 492 } 493 494 /* Enable the peripheral clock */ 495 err = clk_prepare_enable(aq->pclk); 496 if (err) { 497 dev_err(&pdev->dev, "failed to enable the peripheral clock\n"); 498 goto exit; 499 } 500 501 aq->caps = of_device_get_match_data(&pdev->dev); 502 if (!aq->caps) { 503 dev_err(&pdev->dev, "Could not retrieve QSPI caps\n"); 504 err = -EINVAL; 505 goto exit; 506 } 507 508 if (aq->caps->has_qspick) { 509 /* Get the QSPI system clock */ 510 aq->qspick = devm_clk_get(&pdev->dev, "qspick"); 511 if (IS_ERR(aq->qspick)) { 512 dev_err(&pdev->dev, "missing system clock\n"); 513 err = PTR_ERR(aq->qspick); 514 goto disable_pclk; 515 } 516 517 /* Enable the QSPI system clock */ 518 err = clk_prepare_enable(aq->qspick); 519 if (err) { 520 dev_err(&pdev->dev, 521 "failed to enable the QSPI system clock\n"); 522 goto disable_pclk; 523 } 524 } 525 526 /* Request the IRQ */ 527 irq = platform_get_irq(pdev, 0); 528 if (irq < 0) { 529 err = irq; 530 goto disable_qspick; 531 } 532 err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt, 533 0, dev_name(&pdev->dev), aq); 534 if (err) 535 goto disable_qspick; 536 537 atmel_qspi_init(aq); 538 539 err = spi_register_controller(ctrl); 540 if (err) 541 goto disable_qspick; 542 543 return 0; 544 545 disable_qspick: 546 clk_disable_unprepare(aq->qspick); 547 disable_pclk: 548 clk_disable_unprepare(aq->pclk); 549 exit: 550 spi_controller_put(ctrl); 551 552 return err; 553 } 554 555 static int atmel_qspi_remove(struct platform_device *pdev) 556 { 557 struct spi_controller *ctrl = platform_get_drvdata(pdev); 558 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 559 560 spi_unregister_controller(ctrl); 561 writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR); 562 clk_disable_unprepare(aq->qspick); 563 clk_disable_unprepare(aq->pclk); 564 return 0; 565 } 566 567 static int __maybe_unused atmel_qspi_suspend(struct device *dev) 568 { 569 struct spi_controller *ctrl = dev_get_drvdata(dev); 570 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 571 572 clk_disable_unprepare(aq->qspick); 573 clk_disable_unprepare(aq->pclk); 574 575 return 0; 576 } 577 578 static int __maybe_unused atmel_qspi_resume(struct device *dev) 579 { 580 struct spi_controller *ctrl = dev_get_drvdata(dev); 581 struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); 582 583 clk_prepare_enable(aq->pclk); 584 clk_prepare_enable(aq->qspick); 585 586 atmel_qspi_init(aq); 587 588 writel_relaxed(aq->scr, aq->regs + QSPI_SCR); 589 590 return 0; 591 } 592 593 static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend, 594 atmel_qspi_resume); 595 596 static const struct atmel_qspi_caps atmel_sama5d2_qspi_caps = {}; 597 598 static const struct atmel_qspi_caps atmel_sam9x60_qspi_caps = { 599 .has_qspick = true, 600 .has_ricr = true, 601 }; 602 603 static const struct of_device_id atmel_qspi_dt_ids[] = { 604 { 605 .compatible = "atmel,sama5d2-qspi", 606 .data = &atmel_sama5d2_qspi_caps, 607 }, 608 { 609 .compatible = "microchip,sam9x60-qspi", 610 .data = &atmel_sam9x60_qspi_caps, 611 }, 612 { /* sentinel */ } 613 }; 614 615 MODULE_DEVICE_TABLE(of, atmel_qspi_dt_ids); 616 617 static struct platform_driver atmel_qspi_driver = { 618 .driver = { 619 .name = "atmel_qspi", 620 .of_match_table = atmel_qspi_dt_ids, 621 .pm = &atmel_qspi_pm_ops, 622 }, 623 .probe = atmel_qspi_probe, 624 .remove = atmel_qspi_remove, 625 }; 626 module_platform_driver(atmel_qspi_driver); 627 628 MODULE_AUTHOR("Cyrille Pitchen <cyrille.pitchen@atmel.com>"); 629 MODULE_AUTHOR("Piotr Bugalski <bugalski.piotr@gmail.com"); 630 MODULE_DESCRIPTION("Atmel QSPI Controller driver"); 631 MODULE_LICENSE("GPL v2"); 632