xref: /linux/drivers/soundwire/bus.h (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1 /* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
2 /* Copyright(c) 2015-17 Intel Corporation. */
3 
4 #ifndef __SDW_BUS_H
5 #define __SDW_BUS_H
6 
7 #define DEFAULT_BANK_SWITCH_TIMEOUT 3000
8 #define DEFAULT_PROBE_TIMEOUT       2000
9 
10 u64 sdw_dmi_override_adr(struct sdw_bus *bus, u64 addr);
11 
12 #if IS_ENABLED(CONFIG_ACPI)
13 int sdw_acpi_find_slaves(struct sdw_bus *bus);
14 #else
15 static inline int sdw_acpi_find_slaves(struct sdw_bus *bus)
16 {
17 	return -ENOTSUPP;
18 }
19 #endif
20 
21 int sdw_of_find_slaves(struct sdw_bus *bus);
22 void sdw_extract_slave_id(struct sdw_bus *bus,
23 			  u64 addr, struct sdw_slave_id *id);
24 int sdw_slave_add(struct sdw_bus *bus, struct sdw_slave_id *id,
25 		  struct fwnode_handle *fwnode);
26 int sdw_master_device_add(struct sdw_bus *bus, struct device *parent,
27 			  struct fwnode_handle *fwnode);
28 int sdw_master_device_del(struct sdw_bus *bus);
29 
30 #ifdef CONFIG_DEBUG_FS
31 void sdw_bus_debugfs_init(struct sdw_bus *bus);
32 void sdw_bus_debugfs_exit(struct sdw_bus *bus);
33 void sdw_slave_debugfs_init(struct sdw_slave *slave);
34 void sdw_slave_debugfs_exit(struct sdw_slave *slave);
35 void sdw_debugfs_init(void);
36 void sdw_debugfs_exit(void);
37 #else
38 static inline void sdw_bus_debugfs_init(struct sdw_bus *bus) {}
39 static inline void sdw_bus_debugfs_exit(struct sdw_bus *bus) {}
40 static inline void sdw_slave_debugfs_init(struct sdw_slave *slave) {}
41 static inline void sdw_slave_debugfs_exit(struct sdw_slave *slave) {}
42 static inline void sdw_debugfs_init(void) {}
43 static inline void sdw_debugfs_exit(void) {}
44 #endif
45 
46 enum {
47 	SDW_MSG_FLAG_READ = 0,
48 	SDW_MSG_FLAG_WRITE,
49 };
50 
51 /**
52  * struct sdw_msg - Message structure
53  * @addr: Register address accessed in the Slave
54  * @len: number of messages
55  * @dev_num: Slave device number
56  * @addr_page1: SCP address page 1 Slave register
57  * @addr_page2: SCP address page 2 Slave register
58  * @flags: transfer flags, indicate if xfer is read or write
59  * @buf: message data buffer
60  * @ssp_sync: Send message at SSP (Stream Synchronization Point)
61  * @page: address requires paging
62  */
63 struct sdw_msg {
64 	u16 addr;
65 	u16 len;
66 	u8 dev_num;
67 	u8 addr_page1;
68 	u8 addr_page2;
69 	u8 flags;
70 	u8 *buf;
71 	bool ssp_sync;
72 	bool page;
73 };
74 
75 #define SDW_DOUBLE_RATE_FACTOR		2
76 #define SDW_STRM_RATE_GROUPING		1
77 
78 extern int sdw_rows[SDW_FRAME_ROWS];
79 extern int sdw_cols[SDW_FRAME_COLS];
80 
81 int sdw_find_row_index(int row);
82 int sdw_find_col_index(int col);
83 
84 /**
85  * sdw_port_runtime: Runtime port parameters for Master or Slave
86  *
87  * @num: Port number. For audio streams, valid port number ranges from
88  * [1,14]
89  * @ch_mask: Channel mask
90  * @transport_params: Transport parameters
91  * @port_params: Port parameters
92  * @port_node: List node for Master or Slave port_list
93  *
94  * SoundWire spec has no mention of ports for Master interface but the
95  * concept is logically extended.
96  */
97 struct sdw_port_runtime {
98 	int num;
99 	int ch_mask;
100 	struct sdw_transport_params transport_params;
101 	struct sdw_port_params port_params;
102 	struct list_head port_node;
103 };
104 
105 /**
106  * sdw_slave_runtime: Runtime Stream parameters for Slave
107  *
108  * @slave: Slave handle
109  * @direction: Data direction for Slave
110  * @ch_count: Number of channels handled by the Slave for
111  * this stream
112  * @m_rt_node: sdw_master_runtime list node
113  * @port_list: List of Slave Ports configured for this stream
114  */
115 struct sdw_slave_runtime {
116 	struct sdw_slave *slave;
117 	enum sdw_data_direction direction;
118 	unsigned int ch_count;
119 	struct list_head m_rt_node;
120 	struct list_head port_list;
121 };
122 
123 /**
124  * sdw_master_runtime: Runtime stream parameters for Master
125  *
126  * @bus: Bus handle
127  * @stream: Stream runtime handle
128  * @direction: Data direction for Master
129  * @ch_count: Number of channels handled by the Master for
130  * this stream, can be zero.
131  * @slave_rt_list: Slave runtime list
132  * @port_list: List of Master Ports configured for this stream, can be zero.
133  * @stream_node: sdw_stream_runtime master_list node
134  * @bus_node: sdw_bus m_rt_list node
135  */
136 struct sdw_master_runtime {
137 	struct sdw_bus *bus;
138 	struct sdw_stream_runtime *stream;
139 	enum sdw_data_direction direction;
140 	unsigned int ch_count;
141 	struct list_head slave_rt_list;
142 	struct list_head port_list;
143 	struct list_head stream_node;
144 	struct list_head bus_node;
145 };
146 
147 struct sdw_transport_data {
148 	int hstart;
149 	int hstop;
150 	int block_offset;
151 	int sub_block_offset;
152 };
153 
154 struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
155 					    enum sdw_data_direction direction,
156 					    unsigned int port_num);
157 int sdw_configure_dpn_intr(struct sdw_slave *slave, int port,
158 			   bool enable, int mask);
159 
160 int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg);
161 int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg);
162 
163 #define SDW_READ_INTR_CLEAR_RETRY	10
164 
165 int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
166 		 u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf);
167 
168 /* Fill transport parameter data structure */
169 static inline void sdw_fill_xport_params(struct sdw_transport_params *params,
170 					 int port_num, bool grp_ctrl_valid,
171 					 int grp_ctrl, int sample_int,
172 					 int off1, int off2,
173 					 int hstart, int hstop,
174 					 int pack_mode, int lane_ctrl)
175 {
176 	params->port_num = port_num;
177 	params->blk_grp_ctrl_valid = grp_ctrl_valid;
178 	params->blk_grp_ctrl = grp_ctrl;
179 	params->sample_interval = sample_int;
180 	params->offset1 = off1;
181 	params->offset2 = off2;
182 	params->hstart = hstart;
183 	params->hstop = hstop;
184 	params->blk_pkg_mode = pack_mode;
185 	params->lane_ctrl = lane_ctrl;
186 }
187 
188 /* Fill port parameter data structure */
189 static inline void sdw_fill_port_params(struct sdw_port_params *params,
190 					int port_num, int bps,
191 					int flow_mode, int data_mode)
192 {
193 	params->num = port_num;
194 	params->bps = bps;
195 	params->flow_mode = flow_mode;
196 	params->data_mode = data_mode;
197 }
198 
199 /* broadcast read/write for tests */
200 int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr);
201 int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value);
202 
203 /*
204  * At the moment we only track Master-initiated hw_reset.
205  * Additional fields can be added as needed
206  */
207 #define SDW_UNATTACH_REQUEST_MASTER_RESET	BIT(0)
208 
209 void sdw_clear_slave_status(struct sdw_bus *bus, u32 request);
210 int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
211 void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt,
212 			     struct sdw_transport_data *t_data);
213 
214 #endif /* __SDW_BUS_H */
215