1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2015, Sony Mobile Communications AB. 4 * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. 5 */ 6 7 #include <linux/interrupt.h> 8 #include <linux/list.h> 9 #include <linux/io.h> 10 #include <linux/of.h> 11 #include <linux/irq.h> 12 #include <linux/irqdomain.h> 13 #include <linux/mailbox_client.h> 14 #include <linux/mfd/syscon.h> 15 #include <linux/module.h> 16 #include <linux/platform_device.h> 17 #include <linux/pm_wakeirq.h> 18 #include <linux/regmap.h> 19 #include <linux/seq_file.h> 20 #include <linux/soc/qcom/smem.h> 21 #include <linux/soc/qcom/smem_state.h> 22 #include <linux/spinlock.h> 23 24 /* 25 * The Shared Memory Point to Point (SMP2P) protocol facilitates communication 26 * of a single 32-bit value between two processors. Each value has a single 27 * writer (the local side) and a single reader (the remote side). Values are 28 * uniquely identified in the system by the directed edge (local processor ID 29 * to remote processor ID) and a string identifier. 30 * 31 * Each processor is responsible for creating the outgoing SMEM items and each 32 * item is writable by the local processor and readable by the remote 33 * processor. By using two separate SMEM items that are single-reader and 34 * single-writer, SMP2P does not require any remote locking mechanisms. 35 * 36 * The driver uses the Linux GPIO and interrupt framework to expose a virtual 37 * GPIO for each outbound entry and a virtual interrupt controller for each 38 * inbound entry. 39 */ 40 41 #define SMP2P_MAX_ENTRY 16 42 #define SMP2P_MAX_ENTRY_NAME 16 43 44 #define SMP2P_FEATURE_SSR_ACK 0x1 45 #define SMP2P_FLAGS_RESTART_DONE_BIT 0 46 #define SMP2P_FLAGS_RESTART_ACK_BIT 1 47 48 #define SMP2P_MAGIC 0x504d5324 49 #define SMP2P_ALL_FEATURES SMP2P_FEATURE_SSR_ACK 50 51 /** 52 * struct smp2p_smem_item - in memory communication structure 53 * @magic: magic number 54 * @version: version - must be 1 55 * @features: features flag - currently unused 56 * @local_pid: processor id of sending end 57 * @remote_pid: processor id of receiving end 58 * @total_entries: number of entries - always SMP2P_MAX_ENTRY 59 * @valid_entries: number of allocated entries 60 * @flags: 61 * @entries: individual communication entries 62 * @entries.name: name of the entry 63 * @entries.value: content of the entry 64 */ 65 struct smp2p_smem_item { 66 u32 magic; 67 u8 version; 68 unsigned features:24; 69 u16 local_pid; 70 u16 remote_pid; 71 u16 total_entries; 72 u16 valid_entries; 73 u32 flags; 74 75 struct { 76 u8 name[SMP2P_MAX_ENTRY_NAME]; 77 u32 value; 78 } entries[SMP2P_MAX_ENTRY]; 79 } __packed; 80 81 /** 82 * struct smp2p_entry - driver context matching one entry 83 * @node: list entry to keep track of allocated entries 84 * @smp2p: reference to the device driver context 85 * @name: name of the entry, to match against smp2p_smem_item 86 * @value: pointer to smp2p_smem_item entry value 87 * @last_value: last handled value 88 * @domain: irq_domain for inbound entries 89 * @irq_enabled:bitmap to track enabled irq bits 90 * @irq_rising: bitmap to mark irq bits for rising detection 91 * @irq_falling:bitmap to mark irq bits for falling detection 92 * @state: smem state handle 93 * @lock: spinlock to protect read-modify-write of the value 94 */ 95 struct smp2p_entry { 96 struct list_head node; 97 struct qcom_smp2p *smp2p; 98 99 const char *name; 100 u32 *value; 101 u32 last_value; 102 103 struct irq_domain *domain; 104 DECLARE_BITMAP(irq_enabled, 32); 105 DECLARE_BITMAP(irq_rising, 32); 106 DECLARE_BITMAP(irq_falling, 32); 107 108 struct qcom_smem_state *state; 109 110 spinlock_t lock; 111 }; 112 113 #define SMP2P_INBOUND 0 114 #define SMP2P_OUTBOUND 1 115 116 /** 117 * struct qcom_smp2p - device driver context 118 * @dev: device driver handle 119 * @in: pointer to the inbound smem item 120 * @out: pointer to the outbound smem item 121 * @smem_items: ids of the two smem items 122 * @valid_entries: already scanned inbound entries 123 * @ssr_ack_enabled: SMP2P_FEATURE_SSR_ACK feature is supported and was enabled 124 * @ssr_ack: current cached state of the local ack bit 125 * @negotiation_done: whether negotiating finished 126 * @local_pid: processor id of the inbound edge 127 * @remote_pid: processor id of the outbound edge 128 * @ipc_regmap: regmap for the outbound ipc 129 * @ipc_offset: offset within the regmap 130 * @ipc_bit: bit in regmap@offset to kick to signal remote processor 131 * @mbox_client: mailbox client handle 132 * @mbox_chan: apcs ipc mailbox channel handle 133 * @inbound: list of inbound entries 134 * @outbound: list of outbound entries 135 */ 136 struct qcom_smp2p { 137 struct device *dev; 138 139 struct smp2p_smem_item *in; 140 struct smp2p_smem_item *out; 141 142 unsigned smem_items[SMP2P_OUTBOUND + 1]; 143 144 unsigned valid_entries; 145 146 bool ssr_ack_enabled; 147 bool ssr_ack; 148 bool negotiation_done; 149 150 unsigned local_pid; 151 unsigned remote_pid; 152 153 struct regmap *ipc_regmap; 154 int ipc_offset; 155 int ipc_bit; 156 157 struct mbox_client mbox_client; 158 struct mbox_chan *mbox_chan; 159 160 struct list_head inbound; 161 struct list_head outbound; 162 }; 163 164 static void qcom_smp2p_kick(struct qcom_smp2p *smp2p) 165 { 166 /* Make sure any updated data is written before the kick */ 167 wmb(); 168 169 if (smp2p->mbox_chan) { 170 mbox_send_message(smp2p->mbox_chan, NULL); 171 mbox_client_txdone(smp2p->mbox_chan, 0); 172 } else { 173 regmap_write(smp2p->ipc_regmap, smp2p->ipc_offset, BIT(smp2p->ipc_bit)); 174 } 175 } 176 177 static bool qcom_smp2p_check_ssr(struct qcom_smp2p *smp2p) 178 { 179 struct smp2p_smem_item *in = smp2p->in; 180 bool restart; 181 182 if (!smp2p->ssr_ack_enabled) 183 return false; 184 185 restart = in->flags & BIT(SMP2P_FLAGS_RESTART_DONE_BIT); 186 187 return restart != smp2p->ssr_ack; 188 } 189 190 static void qcom_smp2p_do_ssr_ack(struct qcom_smp2p *smp2p) 191 { 192 struct smp2p_smem_item *out = smp2p->out; 193 u32 val; 194 195 smp2p->ssr_ack = !smp2p->ssr_ack; 196 197 val = out->flags & ~BIT(SMP2P_FLAGS_RESTART_ACK_BIT); 198 if (smp2p->ssr_ack) 199 val |= BIT(SMP2P_FLAGS_RESTART_ACK_BIT); 200 out->flags = val; 201 202 qcom_smp2p_kick(smp2p); 203 } 204 205 static void qcom_smp2p_negotiate(struct qcom_smp2p *smp2p) 206 { 207 struct smp2p_smem_item *out = smp2p->out; 208 struct smp2p_smem_item *in = smp2p->in; 209 210 if (in->version == out->version) { 211 out->features &= in->features; 212 213 if (out->features & SMP2P_FEATURE_SSR_ACK) 214 smp2p->ssr_ack_enabled = true; 215 216 smp2p->negotiation_done = true; 217 } 218 } 219 220 static void qcom_smp2p_notify_in(struct qcom_smp2p *smp2p) 221 { 222 struct smp2p_smem_item *in; 223 struct smp2p_entry *entry; 224 int irq_pin; 225 u32 status; 226 char buf[SMP2P_MAX_ENTRY_NAME]; 227 u32 val; 228 int i; 229 230 in = smp2p->in; 231 232 /* Match newly created entries */ 233 for (i = smp2p->valid_entries; i < in->valid_entries; i++) { 234 list_for_each_entry(entry, &smp2p->inbound, node) { 235 memcpy(buf, in->entries[i].name, sizeof(buf)); 236 if (!strcmp(buf, entry->name)) { 237 entry->value = &in->entries[i].value; 238 break; 239 } 240 } 241 } 242 smp2p->valid_entries = i; 243 244 /* Fire interrupts based on any value changes */ 245 list_for_each_entry(entry, &smp2p->inbound, node) { 246 /* Ignore entries not yet allocated by the remote side */ 247 if (!entry->value) 248 continue; 249 250 val = readl(entry->value); 251 252 status = val ^ entry->last_value; 253 entry->last_value = val; 254 255 /* No changes of this entry? */ 256 if (!status) 257 continue; 258 259 for_each_set_bit(i, entry->irq_enabled, 32) { 260 if (!(status & BIT(i))) 261 continue; 262 263 if ((val & BIT(i) && test_bit(i, entry->irq_rising)) || 264 (!(val & BIT(i)) && test_bit(i, entry->irq_falling))) { 265 irq_pin = irq_find_mapping(entry->domain, i); 266 handle_nested_irq(irq_pin); 267 } 268 } 269 } 270 } 271 272 /** 273 * qcom_smp2p_intr() - interrupt handler for incoming notifications 274 * @irq: unused 275 * @data: smp2p driver context 276 * 277 * Handle notifications from the remote side to handle newly allocated entries 278 * or any changes to the state bits of existing entries. 279 * 280 * Return: %IRQ_HANDLED 281 */ 282 static irqreturn_t qcom_smp2p_intr(int irq, void *data) 283 { 284 struct smp2p_smem_item *in; 285 struct qcom_smp2p *smp2p = data; 286 unsigned int smem_id = smp2p->smem_items[SMP2P_INBOUND]; 287 unsigned int pid = smp2p->remote_pid; 288 bool ack_restart; 289 size_t size; 290 291 in = smp2p->in; 292 293 /* Acquire smem item, if not already found */ 294 if (!in) { 295 in = qcom_smem_get(pid, smem_id, &size); 296 if (IS_ERR(in)) { 297 dev_err(smp2p->dev, 298 "Unable to acquire remote smp2p item\n"); 299 goto out; 300 } 301 302 smp2p->in = in; 303 } 304 305 if (!smp2p->negotiation_done) 306 qcom_smp2p_negotiate(smp2p); 307 308 if (smp2p->negotiation_done) { 309 ack_restart = qcom_smp2p_check_ssr(smp2p); 310 qcom_smp2p_notify_in(smp2p); 311 312 if (ack_restart) 313 qcom_smp2p_do_ssr_ack(smp2p); 314 } 315 316 out: 317 return IRQ_HANDLED; 318 } 319 320 static void smp2p_mask_irq(struct irq_data *irqd) 321 { 322 struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); 323 irq_hw_number_t irq = irqd_to_hwirq(irqd); 324 325 clear_bit(irq, entry->irq_enabled); 326 } 327 328 static void smp2p_unmask_irq(struct irq_data *irqd) 329 { 330 struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); 331 irq_hw_number_t irq = irqd_to_hwirq(irqd); 332 333 set_bit(irq, entry->irq_enabled); 334 } 335 336 static int smp2p_set_irq_type(struct irq_data *irqd, unsigned int type) 337 { 338 struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); 339 irq_hw_number_t irq = irqd_to_hwirq(irqd); 340 341 if (!(type & IRQ_TYPE_EDGE_BOTH)) 342 return -EINVAL; 343 344 if (type & IRQ_TYPE_EDGE_RISING) 345 set_bit(irq, entry->irq_rising); 346 else 347 clear_bit(irq, entry->irq_rising); 348 349 if (type & IRQ_TYPE_EDGE_FALLING) 350 set_bit(irq, entry->irq_falling); 351 else 352 clear_bit(irq, entry->irq_falling); 353 354 return 0; 355 } 356 357 static void smp2p_irq_print_chip(struct irq_data *irqd, struct seq_file *p) 358 { 359 struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); 360 361 seq_printf(p, " %8s", dev_name(entry->smp2p->dev)); 362 } 363 364 static struct irq_chip smp2p_irq_chip = { 365 .name = "smp2p", 366 .irq_mask = smp2p_mask_irq, 367 .irq_unmask = smp2p_unmask_irq, 368 .irq_set_type = smp2p_set_irq_type, 369 .irq_print_chip = smp2p_irq_print_chip, 370 }; 371 372 static int smp2p_irq_map(struct irq_domain *d, 373 unsigned int irq, 374 irq_hw_number_t hw) 375 { 376 struct smp2p_entry *entry = d->host_data; 377 378 irq_set_chip_and_handler(irq, &smp2p_irq_chip, handle_level_irq); 379 irq_set_chip_data(irq, entry); 380 irq_set_nested_thread(irq, 1); 381 irq_set_noprobe(irq); 382 383 return 0; 384 } 385 386 static const struct irq_domain_ops smp2p_irq_ops = { 387 .map = smp2p_irq_map, 388 .xlate = irq_domain_xlate_twocell, 389 }; 390 391 static int qcom_smp2p_inbound_entry(struct qcom_smp2p *smp2p, 392 struct smp2p_entry *entry, 393 struct device_node *node) 394 { 395 entry->domain = irq_domain_add_linear(node, 32, &smp2p_irq_ops, entry); 396 if (!entry->domain) { 397 dev_err(smp2p->dev, "failed to add irq_domain\n"); 398 return -ENOMEM; 399 } 400 401 return 0; 402 } 403 404 static int smp2p_update_bits(void *data, u32 mask, u32 value) 405 { 406 struct smp2p_entry *entry = data; 407 unsigned long flags; 408 u32 orig; 409 u32 val; 410 411 spin_lock_irqsave(&entry->lock, flags); 412 val = orig = readl(entry->value); 413 val &= ~mask; 414 val |= value; 415 writel(val, entry->value); 416 spin_unlock_irqrestore(&entry->lock, flags); 417 418 if (val != orig) 419 qcom_smp2p_kick(entry->smp2p); 420 421 return 0; 422 } 423 424 static const struct qcom_smem_state_ops smp2p_state_ops = { 425 .update_bits = smp2p_update_bits, 426 }; 427 428 static int qcom_smp2p_outbound_entry(struct qcom_smp2p *smp2p, 429 struct smp2p_entry *entry, 430 struct device_node *node) 431 { 432 struct smp2p_smem_item *out = smp2p->out; 433 char buf[SMP2P_MAX_ENTRY_NAME] = {}; 434 435 /* Allocate an entry from the smem item */ 436 strscpy(buf, entry->name, SMP2P_MAX_ENTRY_NAME); 437 memcpy(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME); 438 439 /* Make the logical entry reference the physical value */ 440 entry->value = &out->entries[out->valid_entries].value; 441 442 out->valid_entries++; 443 444 entry->state = qcom_smem_state_register(node, &smp2p_state_ops, entry); 445 if (IS_ERR(entry->state)) { 446 dev_err(smp2p->dev, "failed to register qcom_smem_state\n"); 447 return PTR_ERR(entry->state); 448 } 449 450 return 0; 451 } 452 453 static int qcom_smp2p_alloc_outbound_item(struct qcom_smp2p *smp2p) 454 { 455 struct smp2p_smem_item *out; 456 unsigned smem_id = smp2p->smem_items[SMP2P_OUTBOUND]; 457 unsigned pid = smp2p->remote_pid; 458 int ret; 459 460 ret = qcom_smem_alloc(pid, smem_id, sizeof(*out)); 461 if (ret < 0 && ret != -EEXIST) { 462 if (ret != -EPROBE_DEFER) 463 dev_err(smp2p->dev, 464 "unable to allocate local smp2p item\n"); 465 return ret; 466 } 467 468 out = qcom_smem_get(pid, smem_id, NULL); 469 if (IS_ERR(out)) { 470 dev_err(smp2p->dev, "Unable to acquire local smp2p item\n"); 471 return PTR_ERR(out); 472 } 473 474 memset(out, 0, sizeof(*out)); 475 out->magic = SMP2P_MAGIC; 476 out->local_pid = smp2p->local_pid; 477 out->remote_pid = smp2p->remote_pid; 478 out->total_entries = SMP2P_MAX_ENTRY; 479 out->valid_entries = 0; 480 out->features = SMP2P_ALL_FEATURES; 481 482 /* 483 * Make sure the rest of the header is written before we validate the 484 * item by writing a valid version number. 485 */ 486 wmb(); 487 out->version = 1; 488 489 qcom_smp2p_kick(smp2p); 490 491 smp2p->out = out; 492 493 return 0; 494 } 495 496 static int smp2p_parse_ipc(struct qcom_smp2p *smp2p) 497 { 498 struct device_node *syscon; 499 struct device *dev = smp2p->dev; 500 const char *key; 501 int ret; 502 503 syscon = of_parse_phandle(dev->of_node, "qcom,ipc", 0); 504 if (!syscon) { 505 dev_err(dev, "no qcom,ipc node\n"); 506 return -ENODEV; 507 } 508 509 smp2p->ipc_regmap = syscon_node_to_regmap(syscon); 510 of_node_put(syscon); 511 if (IS_ERR(smp2p->ipc_regmap)) 512 return PTR_ERR(smp2p->ipc_regmap); 513 514 key = "qcom,ipc"; 515 ret = of_property_read_u32_index(dev->of_node, key, 1, &smp2p->ipc_offset); 516 if (ret < 0) { 517 dev_err(dev, "no offset in %s\n", key); 518 return -EINVAL; 519 } 520 521 ret = of_property_read_u32_index(dev->of_node, key, 2, &smp2p->ipc_bit); 522 if (ret < 0) { 523 dev_err(dev, "no bit in %s\n", key); 524 return -EINVAL; 525 } 526 527 return 0; 528 } 529 530 static int qcom_smp2p_probe(struct platform_device *pdev) 531 { 532 struct smp2p_entry *entry; 533 struct device_node *node; 534 struct qcom_smp2p *smp2p; 535 const char *key; 536 int irq; 537 int ret; 538 539 smp2p = devm_kzalloc(&pdev->dev, sizeof(*smp2p), GFP_KERNEL); 540 if (!smp2p) 541 return -ENOMEM; 542 543 smp2p->dev = &pdev->dev; 544 INIT_LIST_HEAD(&smp2p->inbound); 545 INIT_LIST_HEAD(&smp2p->outbound); 546 547 platform_set_drvdata(pdev, smp2p); 548 549 key = "qcom,smem"; 550 ret = of_property_read_u32_array(pdev->dev.of_node, key, 551 smp2p->smem_items, 2); 552 if (ret) 553 return ret; 554 555 key = "qcom,local-pid"; 556 ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->local_pid); 557 if (ret) 558 goto report_read_failure; 559 560 key = "qcom,remote-pid"; 561 ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->remote_pid); 562 if (ret) 563 goto report_read_failure; 564 565 irq = platform_get_irq(pdev, 0); 566 if (irq < 0) 567 return irq; 568 569 smp2p->mbox_client.dev = &pdev->dev; 570 smp2p->mbox_client.knows_txdone = true; 571 smp2p->mbox_chan = mbox_request_channel(&smp2p->mbox_client, 0); 572 if (IS_ERR(smp2p->mbox_chan)) { 573 if (PTR_ERR(smp2p->mbox_chan) != -ENODEV) 574 return PTR_ERR(smp2p->mbox_chan); 575 576 smp2p->mbox_chan = NULL; 577 578 ret = smp2p_parse_ipc(smp2p); 579 if (ret) 580 return ret; 581 } 582 583 ret = qcom_smp2p_alloc_outbound_item(smp2p); 584 if (ret < 0) 585 goto release_mbox; 586 587 for_each_available_child_of_node(pdev->dev.of_node, node) { 588 entry = devm_kzalloc(&pdev->dev, sizeof(*entry), GFP_KERNEL); 589 if (!entry) { 590 ret = -ENOMEM; 591 of_node_put(node); 592 goto unwind_interfaces; 593 } 594 595 entry->smp2p = smp2p; 596 spin_lock_init(&entry->lock); 597 598 ret = of_property_read_string(node, "qcom,entry-name", &entry->name); 599 if (ret < 0) { 600 of_node_put(node); 601 goto unwind_interfaces; 602 } 603 604 if (of_property_read_bool(node, "interrupt-controller")) { 605 ret = qcom_smp2p_inbound_entry(smp2p, entry, node); 606 if (ret < 0) { 607 of_node_put(node); 608 goto unwind_interfaces; 609 } 610 611 list_add(&entry->node, &smp2p->inbound); 612 } else { 613 ret = qcom_smp2p_outbound_entry(smp2p, entry, node); 614 if (ret < 0) { 615 of_node_put(node); 616 goto unwind_interfaces; 617 } 618 619 list_add(&entry->node, &smp2p->outbound); 620 } 621 } 622 623 /* Kick the outgoing edge after allocating entries */ 624 qcom_smp2p_kick(smp2p); 625 626 ret = devm_request_threaded_irq(&pdev->dev, irq, 627 NULL, qcom_smp2p_intr, 628 IRQF_ONESHOT, 629 NULL, (void *)smp2p); 630 if (ret) { 631 dev_err(&pdev->dev, "failed to request interrupt\n"); 632 goto unwind_interfaces; 633 } 634 635 /* 636 * Treat smp2p interrupt as wakeup source, but keep it disabled 637 * by default. User space can decide enabling it depending on its 638 * use cases. For example if remoteproc crashes and device wants 639 * to handle it immediatedly (e.g. to not miss phone calls) it can 640 * enable wakeup source from user space, while other devices which 641 * do not have proper autosleep feature may want to handle it with 642 * other wakeup events (e.g. Power button) instead waking up immediately. 643 */ 644 device_set_wakeup_capable(&pdev->dev, true); 645 646 ret = dev_pm_set_wake_irq(&pdev->dev, irq); 647 if (ret) 648 goto set_wake_irq_fail; 649 650 return 0; 651 652 set_wake_irq_fail: 653 dev_pm_clear_wake_irq(&pdev->dev); 654 655 unwind_interfaces: 656 list_for_each_entry(entry, &smp2p->inbound, node) 657 irq_domain_remove(entry->domain); 658 659 list_for_each_entry(entry, &smp2p->outbound, node) 660 qcom_smem_state_unregister(entry->state); 661 662 smp2p->out->valid_entries = 0; 663 664 release_mbox: 665 mbox_free_channel(smp2p->mbox_chan); 666 667 return ret; 668 669 report_read_failure: 670 dev_err(&pdev->dev, "failed to read %s\n", key); 671 return -EINVAL; 672 } 673 674 static void qcom_smp2p_remove(struct platform_device *pdev) 675 { 676 struct qcom_smp2p *smp2p = platform_get_drvdata(pdev); 677 struct smp2p_entry *entry; 678 679 dev_pm_clear_wake_irq(&pdev->dev); 680 681 list_for_each_entry(entry, &smp2p->inbound, node) 682 irq_domain_remove(entry->domain); 683 684 list_for_each_entry(entry, &smp2p->outbound, node) 685 qcom_smem_state_unregister(entry->state); 686 687 mbox_free_channel(smp2p->mbox_chan); 688 689 smp2p->out->valid_entries = 0; 690 } 691 692 static const struct of_device_id qcom_smp2p_of_match[] = { 693 { .compatible = "qcom,smp2p" }, 694 {} 695 }; 696 MODULE_DEVICE_TABLE(of, qcom_smp2p_of_match); 697 698 static struct platform_driver qcom_smp2p_driver = { 699 .probe = qcom_smp2p_probe, 700 .remove_new = qcom_smp2p_remove, 701 .driver = { 702 .name = "qcom_smp2p", 703 .of_match_table = qcom_smp2p_of_match, 704 }, 705 }; 706 module_platform_driver(qcom_smp2p_driver); 707 708 MODULE_DESCRIPTION("Qualcomm Shared Memory Point to Point driver"); 709 MODULE_LICENSE("GPL v2"); 710