xref: /linux/drivers/soc/fsl/qe/qe_io.c (revision 4f2c0a4acffbec01079c28f839422e64ddeff004)

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * arch/powerpc/sysdev/qe_lib/qe_io.c
 *
 * QE Parallel I/O ports configuration routines
 *
 * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
 *
 * Author: Li Yang <LeoLi@freescale.com>
 * Based on code from Shlomi Gridish <gridish@freescale.com>
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/ioport.h>

#include <asm/io.h>
#include <soc/fsl/qe/qe.h>

#undef DEBUG

static struct qe_pio_regs __iomem *par_io;
static int num_par_io_ports = 0;

int par_io_init(struct device_node *np)
{
	struct resource res;
	int ret;
	u32 num_ports;

	/* Map Parallel I/O ports registers */
	ret = of_address_to_resource(np, 0, &res);
	if (ret)
		return ret;
	par_io = ioremap(res.start, resource_size(&res));
	if (!par_io)
		return -ENOMEM;

	if (!of_property_read_u32(np, "num-ports", &num_ports))
		num_par_io_ports = num_ports;

	return 0;
}

void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
			 int open_drain, int assignment, int has_irq)
{
	u32 pin_mask1bit;
	u32 pin_mask2bits;
	u32 new_mask2bits;
	u32 tmp_val;

	/* calculate pin location for single and 2 bits information */
	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));

	/* Set open drain, if required */
	tmp_val = ioread32be(&par_io->cpodr);
	if (open_drain)
		iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr);
	else
		iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr);

	/* define direction */
	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
		ioread32be(&par_io->cpdir2) :
		ioread32be(&par_io->cpdir1);

	/* get all bits mask for 2 bit per port */
	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
				(pin % (QE_PIO_PINS / 2) + 1) * 2));

	/* Get the final mask we need for the right definition */
	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
				(pin % (QE_PIO_PINS / 2) + 1) * 2));

	/* clear and set 2 bits mask */
	if (pin > (QE_PIO_PINS / 2) - 1) {
		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2);
		tmp_val &= ~pin_mask2bits;
		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2);
	} else {
		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1);
		tmp_val &= ~pin_mask2bits;
		iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1);
	}
	/* define pin assignment */
	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
		ioread32be(&par_io->cppar2) :
		ioread32be(&par_io->cppar1);

	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
			(pin % (QE_PIO_PINS / 2) + 1) * 2));
	/* clear and set 2 bits mask */
	if (pin > (QE_PIO_PINS / 2) - 1) {
		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2);
		tmp_val &= ~pin_mask2bits;
		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2);
	} else {
		iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1);
		tmp_val &= ~pin_mask2bits;
		iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1);
	}
}
EXPORT_SYMBOL(__par_io_config_pin);

int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
		      int assignment, int has_irq)
{
	if (!par_io || port >= num_par_io_ports)
		return -EINVAL;

	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
			    has_irq);
	return 0;
}
EXPORT_SYMBOL(par_io_config_pin);

int par_io_data_set(u8 port, u8 pin, u8 val)
{
	u32 pin_mask, tmp_val;

	if (port >= num_par_io_ports)
		return -EINVAL;
	if (pin >= QE_PIO_PINS)
		return -EINVAL;
	/* calculate pin location */
	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));

	tmp_val = ioread32be(&par_io[port].cpdata);

	if (val == 0)		/* clear */
		iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata);
	else			/* set */
		iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata);

	return 0;
}
EXPORT_SYMBOL(par_io_data_set);

int par_io_of_config(struct device_node *np)
{
	struct device_node *pio;
	int pio_map_len;
	const __be32 *pio_map;

	if (par_io == NULL) {
		printk(KERN_ERR "par_io not initialized\n");
		return -1;
	}

	pio = of_parse_phandle(np, "pio-handle", 0);
	if (pio == NULL) {
		printk(KERN_ERR "pio-handle not available\n");
		return -1;
	}

	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
	if (pio_map == NULL) {
		printk(KERN_ERR "pio-map is not set!\n");
		return -1;
	}
	pio_map_len /= sizeof(unsigned int);
	if ((pio_map_len % 6) != 0) {
		printk(KERN_ERR "pio-map format wrong!\n");
		return -1;
	}

	while (pio_map_len > 0) {
		u8 port        = be32_to_cpu(pio_map[0]);
		u8 pin         = be32_to_cpu(pio_map[1]);
		int dir        = be32_to_cpu(pio_map[2]);
		int open_drain = be32_to_cpu(pio_map[3]);
		int assignment = be32_to_cpu(pio_map[4]);
		int has_irq    = be32_to_cpu(pio_map[5]);

		par_io_config_pin(port, pin, dir, open_drain,
				  assignment, has_irq);
		pio_map += 6;
		pio_map_len -= 6;
	}
	of_node_put(pio);
	return 0;
}
EXPORT_SYMBOL(par_io_of_config);