xref: /linux/drivers/scsi/vmw_pvscsi.h (revision 4f2c0a4acffbec01079c28f839422e64ddeff004)
1 /*
2  * VMware PVSCSI header file
3  *
4  * Copyright (C) 2008-2014, VMware, Inc. All Rights Reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; version 2 of the License and no later version.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13  * NON INFRINGEMENT.  See the GNU General Public License for more
14  * details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
19  *
20  */
21 
22 #ifndef _VMW_PVSCSI_H_
23 #define _VMW_PVSCSI_H_
24 
25 #include <linux/types.h>
26 
27 #define PVSCSI_DRIVER_VERSION_STRING   "1.0.7.0-k"
28 
29 #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
30 
31 #define MASK(n)        ((1 << (n)) - 1)        /* make an n-bit mask */
32 
33 #define PCI_DEVICE_ID_VMWARE_PVSCSI	0x07C0
34 
35 /*
36  * host adapter status/error codes
37  */
38 enum HostBusAdapterStatus {
39 	BTSTAT_SUCCESS       = 0x00,  /* CCB complete normally with no errors */
40 	BTSTAT_LINKED_COMMAND_COMPLETED           = 0x0a,
41 	BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
42 	BTSTAT_DATA_UNDERRUN = 0x0c,
43 	BTSTAT_SELTIMEO      = 0x11,  /* SCSI selection timeout */
44 	BTSTAT_DATARUN       = 0x12,  /* data overrun/underrun */
45 	BTSTAT_BUSFREE       = 0x13,  /* unexpected bus free */
46 	BTSTAT_INVPHASE      = 0x14,  /* invalid bus phase or sequence
47 				       * requested by target */
48 	BTSTAT_LUNMISMATCH   = 0x17,  /* linked CCB has different LUN from
49 				       * first CCB */
50 	BTSTAT_INVPARAM      = 0x1a,  /* invalid parameter in CCB or segment
51 				       * list */
52 	BTSTAT_SENSFAILED    = 0x1b,  /* auto request sense failed */
53 	BTSTAT_TAGREJECT     = 0x1c,  /* SCSI II tagged queueing message
54 				       * rejected by target */
55 	BTSTAT_BADMSG        = 0x1d,  /* unsupported message received by the
56 				       * host adapter */
57 	BTSTAT_HAHARDWARE    = 0x20,  /* host adapter hardware failed */
58 	BTSTAT_NORESPONSE    = 0x21,  /* target did not respond to SCSI ATN,
59 				       * sent a SCSI RST */
60 	BTSTAT_SENTRST       = 0x22,  /* host adapter asserted a SCSI RST */
61 	BTSTAT_RECVRST       = 0x23,  /* other SCSI devices asserted a SCSI
62 				       * RST */
63 	BTSTAT_DISCONNECT    = 0x24,  /* target device reconnected improperly
64 				       * (w/o tag) */
65 	BTSTAT_BUSRESET      = 0x25,  /* host adapter issued BUS device reset */
66 	BTSTAT_ABORTQUEUE    = 0x26,  /* abort queue generated */
67 	BTSTAT_HASOFTWARE    = 0x27,  /* host adapter software error */
68 	BTSTAT_HATIMEOUT     = 0x30,  /* host adapter hardware timeout error */
69 	BTSTAT_SCSIPARITY    = 0x34,  /* SCSI parity error detected */
70 };
71 
72 /*
73  * SCSI device status values.
74  */
75 enum ScsiDeviceStatus {
76 	SDSTAT_GOOD  = 0x00, /* No errors. */
77 	SDSTAT_CHECK = 0x02, /* Check condition. */
78 };
79 
80 /*
81  * Register offsets.
82  *
83  * These registers are accessible both via i/o space and mm i/o.
84  */
85 
86 enum PVSCSIRegOffset {
87 	PVSCSI_REG_OFFSET_COMMAND        =    0x0,
88 	PVSCSI_REG_OFFSET_COMMAND_DATA   =    0x4,
89 	PVSCSI_REG_OFFSET_COMMAND_STATUS =    0x8,
90 	PVSCSI_REG_OFFSET_LAST_STS_0     =  0x100,
91 	PVSCSI_REG_OFFSET_LAST_STS_1     =  0x104,
92 	PVSCSI_REG_OFFSET_LAST_STS_2     =  0x108,
93 	PVSCSI_REG_OFFSET_LAST_STS_3     =  0x10c,
94 	PVSCSI_REG_OFFSET_INTR_STATUS    = 0x100c,
95 	PVSCSI_REG_OFFSET_INTR_MASK      = 0x2010,
96 	PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
97 	PVSCSI_REG_OFFSET_DEBUG          = 0x3018,
98 	PVSCSI_REG_OFFSET_KICK_RW_IO     = 0x4018,
99 };
100 
101 /*
102  * Virtual h/w commands.
103  */
104 
105 enum PVSCSICommands {
106 	PVSCSI_CMD_FIRST             = 0, /* has to be first */
107 
108 	PVSCSI_CMD_ADAPTER_RESET     = 1,
109 	PVSCSI_CMD_ISSUE_SCSI        = 2,
110 	PVSCSI_CMD_SETUP_RINGS       = 3,
111 	PVSCSI_CMD_RESET_BUS         = 4,
112 	PVSCSI_CMD_RESET_DEVICE      = 5,
113 	PVSCSI_CMD_ABORT_CMD         = 6,
114 	PVSCSI_CMD_CONFIG            = 7,
115 	PVSCSI_CMD_SETUP_MSG_RING    = 8,
116 	PVSCSI_CMD_DEVICE_UNPLUG     = 9,
117 	PVSCSI_CMD_SETUP_REQCALLTHRESHOLD     = 10,
118 
119 	PVSCSI_CMD_LAST              = 11  /* has to be last */
120 };
121 
122 /*
123  * Command descriptor for PVSCSI_CMD_RESET_DEVICE --
124  */
125 
126 struct PVSCSICmdDescResetDevice {
127 	u32	target;
128 	u8	lun[8];
129 } __packed;
130 
131 /*
132  * Command descriptor for PVSCSI_CMD_CONFIG --
133  */
134 
135 struct PVSCSICmdDescConfigCmd {
136 	u64 cmpAddr;
137 	u64 configPageAddress;
138 	u32 configPageNum;
139 	u32 _pad;
140 } __packed;
141 
142 /*
143  * Command descriptor for PVSCSI_CMD_SETUP_REQCALLTHRESHOLD --
144  */
145 
146 struct PVSCSICmdDescSetupReqCall {
147 	u32 enable;
148 } __packed;
149 
150 enum PVSCSIConfigPageType {
151 	PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
152 	PVSCSI_CONFIG_PAGE_PHY        = 0x1959,
153 	PVSCSI_CONFIG_PAGE_DEVICE     = 0x195a,
154 };
155 
156 enum PVSCSIConfigPageAddressType {
157 	PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
158 	PVSCSI_CONFIG_BUSTARGET_ADDRESS  = 0x2121,
159 	PVSCSI_CONFIG_PHY_ADDRESS        = 0x2122,
160 };
161 
162 /*
163  * Command descriptor for PVSCSI_CMD_ABORT_CMD --
164  *
165  * - currently does not support specifying the LUN.
166  * - _pad should be 0.
167  */
168 
169 struct PVSCSICmdDescAbortCmd {
170 	u64	context;
171 	u32	target;
172 	u32	_pad;
173 } __packed;
174 
175 /*
176  * Command descriptor for PVSCSI_CMD_SETUP_RINGS --
177  *
178  * Notes:
179  * - reqRingNumPages and cmpRingNumPages need to be power of two.
180  * - reqRingNumPages and cmpRingNumPages need to be different from 0,
181  * - reqRingNumPages and cmpRingNumPages need to be inferior to
182  *   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
183  */
184 
185 #define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES        32
186 struct PVSCSICmdDescSetupRings {
187 	u32	reqRingNumPages;
188 	u32	cmpRingNumPages;
189 	u64	ringsStatePPN;
190 	u64	reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
191 	u64	cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
192 } __packed;
193 
194 /*
195  * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
196  *
197  * Notes:
198  * - this command was not supported in the initial revision of the h/w
199  *   interface. Before using it, you need to check that it is supported by
200  *   writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
201  *   immediately after read the 'command status' register:
202  *       * a value of -1 means that the cmd is NOT supported,
203  *       * a value != -1 means that the cmd IS supported.
204  *   If it's supported the 'command status' register should return:
205  *      sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
206  * - this command should be issued _after_ the usual SETUP_RINGS so that the
207  *   RingsState page is already setup. If not, the command is a nop.
208  * - numPages needs to be a power of two,
209  * - numPages needs to be different from 0,
210  * - _pad should be zero.
211  */
212 
213 #define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES  16
214 
215 struct PVSCSICmdDescSetupMsgRing {
216 	u32	numPages;
217 	u32	_pad;
218 	u64	ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
219 } __packed;
220 
221 enum PVSCSIMsgType {
222 	PVSCSI_MSG_DEV_ADDED          = 0,
223 	PVSCSI_MSG_DEV_REMOVED        = 1,
224 	PVSCSI_MSG_LAST               = 2,
225 };
226 
227 /*
228  * Msg descriptor.
229  *
230  * sizeof(struct PVSCSIRingMsgDesc) == 128.
231  *
232  * - type is of type enum PVSCSIMsgType.
233  * - the content of args depend on the type of event being delivered.
234  */
235 
236 struct PVSCSIRingMsgDesc {
237 	u32	type;
238 	u32	args[31];
239 } __packed;
240 
241 struct PVSCSIMsgDescDevStatusChanged {
242 	u32	type;  /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
243 	u32	bus;
244 	u32	target;
245 	u8	lun[8];
246 	u32	pad[27];
247 } __packed;
248 
249 /*
250  * Rings state.
251  *
252  * - the fields:
253  *    . msgProdIdx,
254  *    . msgConsIdx,
255  *    . msgNumEntriesLog2,
256  *   .. are only used once the SETUP_MSG_RING cmd has been issued.
257  * - '_pad' helps to ensure that the msg related fields are on their own
258  *   cache-line.
259  */
260 
261 struct PVSCSIRingsState {
262 	u32	reqProdIdx;
263 	u32	reqConsIdx;
264 	u32	reqNumEntriesLog2;
265 
266 	u32	cmpProdIdx;
267 	u32	cmpConsIdx;
268 	u32	cmpNumEntriesLog2;
269 
270 	u32	reqCallThreshold;
271 
272 	u8	_pad[100];
273 
274 	u32	msgProdIdx;
275 	u32	msgConsIdx;
276 	u32	msgNumEntriesLog2;
277 } __packed;
278 
279 /*
280  * Request descriptor.
281  *
282  * sizeof(RingReqDesc) = 128
283  *
284  * - context: is a unique identifier of a command. It could normally be any
285  *   64bit value, however we currently store it in the serialNumber variable
286  *   of struct SCSI_Command, so we have the following restrictions due to the
287  *   way this field is handled in the vmkernel storage stack:
288  *    * this value can't be 0,
289  *    * the upper 32bit need to be 0 since serialNumber is as a u32.
290  *   Currently tracked as PR 292060.
291  * - dataLen: contains the total number of bytes that need to be transferred.
292  * - dataAddr:
293  *   * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
294  *     s/g table segment, each s/g segment is entirely contained on a single
295  *     page of physical memory,
296  *   * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
297  *     the buffer used for the DMA transfer,
298  * - flags:
299  *   * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
300  *   * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
301  *   * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
302  *   * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
303  *   * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
304  *     16bytes. To be specified.
305  * - vcpuHint: vcpuId of the processor that will be most likely waiting for the
306  *   completion of the i/o. For guest OSes that use lowest priority message
307  *   delivery mode (such as windows), we use this "hint" to deliver the
308  *   completion action to the proper vcpu. For now, we can use the vcpuId of
309  *   the processor that initiated the i/o as a likely candidate for the vcpu
310  *   that will be waiting for the completion..
311  * - bus should be 0: we currently only support bus 0 for now.
312  * - unused should be zero'd.
313  */
314 
315 #define PVSCSI_FLAG_CMD_WITH_SG_LIST        (1 << 0)
316 #define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB     (1 << 1)
317 #define PVSCSI_FLAG_CMD_DIR_NONE            (1 << 2)
318 #define PVSCSI_FLAG_CMD_DIR_TOHOST          (1 << 3)
319 #define PVSCSI_FLAG_CMD_DIR_TODEVICE        (1 << 4)
320 
321 struct PVSCSIRingReqDesc {
322 	u64	context;
323 	u64	dataAddr;
324 	u64	dataLen;
325 	u64	senseAddr;
326 	u32	senseLen;
327 	u32	flags;
328 	u8	cdb[16];
329 	u8	cdbLen;
330 	u8	lun[8];
331 	u8	tag;
332 	u8	bus;
333 	u8	target;
334 	u16	vcpuHint;
335 	u8	unused[58];
336 } __packed;
337 
338 /*
339  * Scatter-gather list management.
340  *
341  * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
342  * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
343  * table segment.
344  *
345  * - each segment of the s/g table contain a succession of struct
346  *   PVSCSISGElement.
347  * - each segment is entirely contained on a single physical page of memory.
348  * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
349  *   PVSCSISGElement.flags and in this case:
350  *     * addr is the PA of the next s/g segment,
351  *     * length is undefined, assumed to be 0.
352  */
353 
354 struct PVSCSISGElement {
355 	u64	addr;
356 	u32	length;
357 	u32	flags;
358 } __packed;
359 
360 /*
361  * Completion descriptor.
362  *
363  * sizeof(RingCmpDesc) = 32
364  *
365  * - context: identifier of the command. The same thing that was specified
366  *   under "context" as part of struct RingReqDesc at initiation time,
367  * - dataLen: number of bytes transferred for the actual i/o operation,
368  * - senseLen: number of bytes written into the sense buffer,
369  * - hostStatus: adapter status,
370  * - scsiStatus: device status,
371  * - _pad should be zero.
372  */
373 
374 struct PVSCSIRingCmpDesc {
375 	u64	context;
376 	u64	dataLen;
377 	u32	senseLen;
378 	u16	hostStatus;
379 	u16	scsiStatus;
380 	u32	_pad[2];
381 } __packed;
382 
383 struct PVSCSIConfigPageHeader {
384 	u32 pageNum;
385 	u16 numDwords;
386 	u16 hostStatus;
387 	u16 scsiStatus;
388 	u16 reserved[3];
389 } __packed;
390 
391 struct PVSCSIConfigPageController {
392 	struct PVSCSIConfigPageHeader header;
393 	u64 nodeWWN; /* Device name as defined in the SAS spec. */
394 	u16 manufacturer[64];
395 	u16 serialNumber[64];
396 	u16 opromVersion[32];
397 	u16 hwVersion[32];
398 	u16 firmwareVersion[32];
399 	u32 numPhys;
400 	u8  useConsecutivePhyWWNs;
401 	u8  reserved[3];
402 } __packed;
403 
404 /*
405  * Interrupt status / IRQ bits.
406  */
407 
408 #define PVSCSI_INTR_CMPL_0                 (1 << 0)
409 #define PVSCSI_INTR_CMPL_1                 (1 << 1)
410 #define PVSCSI_INTR_CMPL_MASK              MASK(2)
411 
412 #define PVSCSI_INTR_MSG_0                  (1 << 2)
413 #define PVSCSI_INTR_MSG_1                  (1 << 3)
414 #define PVSCSI_INTR_MSG_MASK               (MASK(2) << 2)
415 
416 #define PVSCSI_INTR_ALL_SUPPORTED          MASK(4)
417 
418 /*
419  * Number of MSI-X vectors supported.
420  */
421 #define PVSCSI_MAX_INTRS        24
422 
423 /*
424  * Misc constants for the rings.
425  */
426 
427 #define PVSCSI_MAX_NUM_PAGES_REQ_RING   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
428 #define PVSCSI_MAX_NUM_PAGES_CMP_RING   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
429 #define PVSCSI_MAX_NUM_PAGES_MSG_RING   PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES
430 
431 #define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
432 				(PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))
433 
434 #define PVSCSI_MAX_REQ_QUEUE_DEPTH \
435 	(PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)
436 
437 #define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES     1
438 #define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
439 #define PVSCSI_MEM_SPACE_MISC_NUM_PAGES        2
440 #define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES     2
441 #define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES        2
442 
443 enum PVSCSIMemSpace {
444 	PVSCSI_MEM_SPACE_COMMAND_PAGE		= 0,
445 	PVSCSI_MEM_SPACE_INTR_STATUS_PAGE	= 1,
446 	PVSCSI_MEM_SPACE_MISC_PAGE		= 2,
447 	PVSCSI_MEM_SPACE_KICK_IO_PAGE		= 4,
448 	PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE	= 6,
449 	PVSCSI_MEM_SPACE_MSIX_PBA_PAGE		= 7,
450 };
451 
452 #define PVSCSI_MEM_SPACE_NUM_PAGES \
453 	(PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES +       \
454 	 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES +   \
455 	 PVSCSI_MEM_SPACE_MISC_NUM_PAGES +          \
456 	 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES +       \
457 	 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)
458 
459 #define PVSCSI_MEM_SPACE_SIZE        (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
460 
461 #endif /* _VMW_PVSCSI_H_ */
462