1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * driver for Microsemi PQI-based storage controllers 4 * Copyright (c) 2019 Microchip Technology Inc. and its subsidiaries 5 * Copyright (c) 2016-2018 Microsemi Corporation 6 * Copyright (c) 2016 PMC-Sierra, Inc. 7 * 8 * Questions/Comments/Bugfixes to storagedev@microchip.com 9 * 10 */ 11 12 #include <linux/module.h> 13 #include <linux/kernel.h> 14 #include <linux/delay.h> 15 #include <linux/pci.h> 16 #include <scsi/scsi_device.h> 17 #include <asm/unaligned.h> 18 #include "smartpqi.h" 19 #include "smartpqi_sis.h" 20 21 /* legacy SIS interface commands */ 22 #define SIS_CMD_GET_ADAPTER_PROPERTIES 0x19 23 #define SIS_CMD_INIT_BASE_STRUCT_ADDRESS 0x1b 24 #define SIS_CMD_GET_PQI_CAPABILITIES 0x3000 25 26 /* for submission of legacy SIS commands */ 27 #define SIS_REENABLE_SIS_MODE 0x1 28 #define SIS_ENABLE_MSIX 0x40 29 #define SIS_ENABLE_INTX 0x80 30 #define SIS_SOFT_RESET 0x100 31 #define SIS_CMD_READY 0x200 32 #define SIS_TRIGGER_SHUTDOWN 0x800000 33 #define SIS_PQI_RESET_QUIESCE 0x1000000 34 35 #define SIS_CMD_COMPLETE 0x1000 36 #define SIS_CLEAR_CTRL_TO_HOST_DOORBELL 0x1000 37 38 #define SIS_CMD_STATUS_SUCCESS 0x1 39 #define SIS_CMD_COMPLETE_TIMEOUT_SECS 30 40 #define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS 10 41 42 /* used with SIS_CMD_GET_ADAPTER_PROPERTIES command */ 43 #define SIS_EXTENDED_PROPERTIES_SUPPORTED 0x800000 44 #define SIS_SMARTARRAY_FEATURES_SUPPORTED 0x2 45 #define SIS_PQI_MODE_SUPPORTED 0x4 46 #define SIS_PQI_RESET_QUIESCE_SUPPORTED 0x8 47 #define SIS_REQUIRED_EXTENDED_PROPERTIES \ 48 (SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED) 49 50 /* used with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */ 51 #define SIS_BASE_STRUCT_REVISION 9 52 #define SIS_BASE_STRUCT_ALIGNMENT 16 53 54 #define SIS_CTRL_KERNEL_UP 0x80 55 #define SIS_CTRL_KERNEL_PANIC 0x100 56 #define SIS_CTRL_READY_TIMEOUT_SECS 180 57 #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90 58 #define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10 59 60 #pragma pack(1) 61 62 /* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */ 63 struct sis_base_struct { 64 __le32 revision; /* revision of this structure */ 65 __le32 flags; /* reserved */ 66 __le32 error_buffer_paddr_low; /* lower 32 bits of physical memory */ 67 /* buffer for PQI error response */ 68 /* data */ 69 __le32 error_buffer_paddr_high; /* upper 32 bits of physical */ 70 /* memory buffer for PQI */ 71 /* error response data */ 72 __le32 error_buffer_element_length; /* length of each PQI error */ 73 /* response buffer element */ 74 /* in bytes */ 75 __le32 error_buffer_num_elements; /* total number of PQI error */ 76 /* response buffers available */ 77 }; 78 79 #pragma pack() 80 81 static int sis_wait_for_ctrl_ready_with_timeout(struct pqi_ctrl_info *ctrl_info, 82 unsigned int timeout_secs) 83 { 84 unsigned long timeout; 85 u32 status; 86 87 timeout = (timeout_secs * PQI_HZ) + jiffies; 88 89 while (1) { 90 status = readl(&ctrl_info->registers->sis_firmware_status); 91 if (status != ~0) { 92 if (status & SIS_CTRL_KERNEL_PANIC) { 93 dev_err(&ctrl_info->pci_dev->dev, 94 "controller is offline: status code 0x%x\n", 95 readl( 96 &ctrl_info->registers->sis_mailbox[7])); 97 return -ENODEV; 98 } 99 if (status & SIS_CTRL_KERNEL_UP) 100 break; 101 } 102 if (time_after(jiffies, timeout)) { 103 dev_err(&ctrl_info->pci_dev->dev, 104 "controller not ready after %u seconds\n", 105 timeout_secs); 106 return -ETIMEDOUT; 107 } 108 msleep(SIS_CTRL_READY_POLL_INTERVAL_MSECS); 109 } 110 111 return 0; 112 } 113 114 int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info) 115 { 116 return sis_wait_for_ctrl_ready_with_timeout(ctrl_info, 117 SIS_CTRL_READY_TIMEOUT_SECS); 118 } 119 120 int sis_wait_for_ctrl_ready_resume(struct pqi_ctrl_info *ctrl_info) 121 { 122 return sis_wait_for_ctrl_ready_with_timeout(ctrl_info, 123 SIS_CTRL_READY_RESUME_TIMEOUT_SECS); 124 } 125 126 bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info) 127 { 128 bool running; 129 u32 status; 130 131 status = readl(&ctrl_info->registers->sis_firmware_status); 132 133 if (status & SIS_CTRL_KERNEL_PANIC) 134 running = false; 135 else 136 running = true; 137 138 if (!running) 139 dev_err(&ctrl_info->pci_dev->dev, 140 "controller is offline: status code 0x%x\n", 141 readl(&ctrl_info->registers->sis_mailbox[7])); 142 143 return running; 144 } 145 146 bool sis_is_kernel_up(struct pqi_ctrl_info *ctrl_info) 147 { 148 return readl(&ctrl_info->registers->sis_firmware_status) & 149 SIS_CTRL_KERNEL_UP; 150 } 151 152 /* used for passing command parameters/results when issuing SIS commands */ 153 struct sis_sync_cmd_params { 154 u32 mailbox[6]; /* mailboxes 0-5 */ 155 }; 156 157 static int sis_send_sync_cmd(struct pqi_ctrl_info *ctrl_info, 158 u32 cmd, struct sis_sync_cmd_params *params) 159 { 160 struct pqi_ctrl_registers __iomem *registers; 161 unsigned int i; 162 unsigned long timeout; 163 u32 doorbell; 164 u32 cmd_status; 165 166 registers = ctrl_info->registers; 167 168 /* Write the command to mailbox 0. */ 169 writel(cmd, ®isters->sis_mailbox[0]); 170 171 /* 172 * Write the command parameters to mailboxes 1-4 (mailbox 5 is not used 173 * when sending a command to the controller). 174 */ 175 for (i = 1; i <= 4; i++) 176 writel(params->mailbox[i], ®isters->sis_mailbox[i]); 177 178 /* Clear the command doorbell. */ 179 writel(SIS_CLEAR_CTRL_TO_HOST_DOORBELL, 180 ®isters->sis_ctrl_to_host_doorbell_clear); 181 182 /* Disable doorbell interrupts by masking all interrupts. */ 183 writel(~0, ®isters->sis_interrupt_mask); 184 185 /* 186 * Force the completion of the interrupt mask register write before 187 * submitting the command. 188 */ 189 readl(®isters->sis_interrupt_mask); 190 191 /* Submit the command to the controller. */ 192 writel(SIS_CMD_READY, ®isters->sis_host_to_ctrl_doorbell); 193 194 /* 195 * Poll for command completion. Note that the call to msleep() is at 196 * the top of the loop in order to give the controller time to start 197 * processing the command before we start polling. 198 */ 199 timeout = (SIS_CMD_COMPLETE_TIMEOUT_SECS * PQI_HZ) + jiffies; 200 while (1) { 201 msleep(SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS); 202 doorbell = readl(®isters->sis_ctrl_to_host_doorbell); 203 if (doorbell & SIS_CMD_COMPLETE) 204 break; 205 if (time_after(jiffies, timeout)) 206 return -ETIMEDOUT; 207 } 208 209 /* Read the command status from mailbox 0. */ 210 cmd_status = readl(®isters->sis_mailbox[0]); 211 if (cmd_status != SIS_CMD_STATUS_SUCCESS) { 212 dev_err(&ctrl_info->pci_dev->dev, 213 "SIS command failed for command 0x%x: status = 0x%x\n", 214 cmd, cmd_status); 215 return -EINVAL; 216 } 217 218 /* 219 * The command completed successfully, so save the command status and 220 * read the values returned in mailboxes 1-5. 221 */ 222 params->mailbox[0] = cmd_status; 223 for (i = 1; i < ARRAY_SIZE(params->mailbox); i++) 224 params->mailbox[i] = readl(®isters->sis_mailbox[i]); 225 226 return 0; 227 } 228 229 /* 230 * This function verifies that we are talking to a controller that speaks PQI. 231 */ 232 233 int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info) 234 { 235 int rc; 236 u32 properties; 237 u32 extended_properties; 238 struct sis_sync_cmd_params params; 239 240 memset(¶ms, 0, sizeof(params)); 241 242 rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_ADAPTER_PROPERTIES, 243 ¶ms); 244 if (rc) 245 return rc; 246 247 properties = params.mailbox[1]; 248 249 if (!(properties & SIS_EXTENDED_PROPERTIES_SUPPORTED)) 250 return -ENODEV; 251 252 extended_properties = params.mailbox[4]; 253 254 if ((extended_properties & SIS_REQUIRED_EXTENDED_PROPERTIES) != 255 SIS_REQUIRED_EXTENDED_PROPERTIES) 256 return -ENODEV; 257 258 if (extended_properties & SIS_PQI_RESET_QUIESCE_SUPPORTED) 259 ctrl_info->pqi_reset_quiesce_supported = true; 260 261 return 0; 262 } 263 264 int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info) 265 { 266 int rc; 267 struct sis_sync_cmd_params params; 268 269 memset(¶ms, 0, sizeof(params)); 270 271 rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_PQI_CAPABILITIES, 272 ¶ms); 273 if (rc) 274 return rc; 275 276 ctrl_info->max_sg_entries = params.mailbox[1]; 277 ctrl_info->max_transfer_size = params.mailbox[2]; 278 ctrl_info->max_outstanding_requests = params.mailbox[3]; 279 ctrl_info->config_table_offset = params.mailbox[4]; 280 ctrl_info->config_table_length = params.mailbox[5]; 281 282 return 0; 283 } 284 285 int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info) 286 { 287 int rc; 288 void *base_struct_unaligned; 289 struct sis_base_struct *base_struct; 290 struct sis_sync_cmd_params params; 291 unsigned long error_buffer_paddr; 292 dma_addr_t bus_address; 293 294 base_struct_unaligned = kzalloc(sizeof(*base_struct) 295 + SIS_BASE_STRUCT_ALIGNMENT - 1, GFP_KERNEL); 296 if (!base_struct_unaligned) 297 return -ENOMEM; 298 299 base_struct = PTR_ALIGN(base_struct_unaligned, 300 SIS_BASE_STRUCT_ALIGNMENT); 301 error_buffer_paddr = (unsigned long)ctrl_info->error_buffer_dma_handle; 302 303 put_unaligned_le32(SIS_BASE_STRUCT_REVISION, &base_struct->revision); 304 put_unaligned_le32(lower_32_bits(error_buffer_paddr), 305 &base_struct->error_buffer_paddr_low); 306 put_unaligned_le32(upper_32_bits(error_buffer_paddr), 307 &base_struct->error_buffer_paddr_high); 308 put_unaligned_le32(PQI_ERROR_BUFFER_ELEMENT_LENGTH, 309 &base_struct->error_buffer_element_length); 310 put_unaligned_le32(ctrl_info->max_io_slots, 311 &base_struct->error_buffer_num_elements); 312 313 bus_address = dma_map_single(&ctrl_info->pci_dev->dev, base_struct, 314 sizeof(*base_struct), DMA_TO_DEVICE); 315 if (dma_mapping_error(&ctrl_info->pci_dev->dev, bus_address)) { 316 rc = -ENOMEM; 317 goto out; 318 } 319 320 memset(¶ms, 0, sizeof(params)); 321 params.mailbox[1] = lower_32_bits((u64)bus_address); 322 params.mailbox[2] = upper_32_bits((u64)bus_address); 323 params.mailbox[3] = sizeof(*base_struct); 324 325 rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_INIT_BASE_STRUCT_ADDRESS, 326 ¶ms); 327 328 dma_unmap_single(&ctrl_info->pci_dev->dev, bus_address, 329 sizeof(*base_struct), DMA_TO_DEVICE); 330 out: 331 kfree(base_struct_unaligned); 332 333 return rc; 334 } 335 336 #define SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS 30 337 338 static int sis_wait_for_doorbell_bit_to_clear( 339 struct pqi_ctrl_info *ctrl_info, u32 bit) 340 { 341 int rc = 0; 342 u32 doorbell_register; 343 unsigned long timeout; 344 345 timeout = (SIS_DOORBELL_BIT_CLEAR_TIMEOUT_SECS * PQI_HZ) + jiffies; 346 347 while (1) { 348 doorbell_register = 349 readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell); 350 if ((doorbell_register & bit) == 0) 351 break; 352 if (readl(&ctrl_info->registers->sis_firmware_status) & 353 SIS_CTRL_KERNEL_PANIC) { 354 rc = -ENODEV; 355 break; 356 } 357 if (time_after(jiffies, timeout)) { 358 dev_err(&ctrl_info->pci_dev->dev, 359 "doorbell register bit 0x%x not cleared\n", 360 bit); 361 rc = -ETIMEDOUT; 362 break; 363 } 364 usleep_range(1000, 2000); 365 } 366 367 return rc; 368 } 369 370 static inline int sis_set_doorbell_bit(struct pqi_ctrl_info *ctrl_info, u32 bit) 371 { 372 writel(bit, &ctrl_info->registers->sis_host_to_ctrl_doorbell); 373 374 return sis_wait_for_doorbell_bit_to_clear(ctrl_info, bit); 375 } 376 377 void sis_enable_msix(struct pqi_ctrl_info *ctrl_info) 378 { 379 sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_MSIX); 380 } 381 382 void sis_enable_intx(struct pqi_ctrl_info *ctrl_info) 383 { 384 sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX); 385 } 386 387 void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info) 388 { 389 if (readl(&ctrl_info->registers->sis_firmware_status) & 390 SIS_CTRL_KERNEL_PANIC) 391 return; 392 393 writel(SIS_TRIGGER_SHUTDOWN, 394 &ctrl_info->registers->sis_host_to_ctrl_doorbell); 395 } 396 397 int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info) 398 { 399 return sis_set_doorbell_bit(ctrl_info, SIS_PQI_RESET_QUIESCE); 400 } 401 402 int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info) 403 { 404 return sis_set_doorbell_bit(ctrl_info, SIS_REENABLE_SIS_MODE); 405 } 406 407 void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value) 408 { 409 writel(value, &ctrl_info->registers->sis_driver_scratch); 410 } 411 412 u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info) 413 { 414 return readl(&ctrl_info->registers->sis_driver_scratch); 415 } 416 417 void sis_soft_reset(struct pqi_ctrl_info *ctrl_info) 418 { 419 writel(SIS_SOFT_RESET, 420 &ctrl_info->registers->sis_host_to_ctrl_doorbell); 421 } 422 423 static void __attribute__((unused)) verify_structures(void) 424 { 425 BUILD_BUG_ON(offsetof(struct sis_base_struct, 426 revision) != 0x0); 427 BUILD_BUG_ON(offsetof(struct sis_base_struct, 428 flags) != 0x4); 429 BUILD_BUG_ON(offsetof(struct sis_base_struct, 430 error_buffer_paddr_low) != 0x8); 431 BUILD_BUG_ON(offsetof(struct sis_base_struct, 432 error_buffer_paddr_high) != 0xc); 433 BUILD_BUG_ON(offsetof(struct sis_base_struct, 434 error_buffer_element_length) != 0x10); 435 BUILD_BUG_ON(offsetof(struct sis_base_struct, 436 error_buffer_num_elements) != 0x14); 437 BUILD_BUG_ON(sizeof(struct sis_base_struct) != 0x18); 438 } 439