1 /* 2 * sd.c Copyright (C) 1992 Drew Eckhardt 3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale 4 * 5 * Linux scsi disk driver 6 * Initial versions: Drew Eckhardt 7 * Subsequent revisions: Eric Youngdale 8 * Modification history: 9 * - Drew Eckhardt <drew@colorado.edu> original 10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple 11 * outstanding request, and other enhancements. 12 * Support loadable low-level scsi drivers. 13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using 14 * eight major numbers. 15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs. 16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in 17 * sd_init and cleanups. 18 * - Alex Davis <letmein@erols.com> Fix problem where partition info 19 * not being read in sd_open. Fix problem where removable media 20 * could be ejected after sd_open. 21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x 22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox 23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>: 24 * Support 32k/1M disks. 25 * 26 * Logging policy (needs CONFIG_SCSI_LOGGING defined): 27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2 28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1 29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1 30 * - entering other commands: SCSI_LOG_HLQUEUE level 3 31 * Note: when the logging level is set by the user, it must be greater 32 * than the level indicated above to trigger output. 33 */ 34 35 #include <linux/module.h> 36 #include <linux/fs.h> 37 #include <linux/kernel.h> 38 #include <linux/mm.h> 39 #include <linux/bio.h> 40 #include <linux/genhd.h> 41 #include <linux/hdreg.h> 42 #include <linux/errno.h> 43 #include <linux/idr.h> 44 #include <linux/interrupt.h> 45 #include <linux/init.h> 46 #include <linux/blkdev.h> 47 #include <linux/blkpg.h> 48 #include <linux/delay.h> 49 #include <linux/mutex.h> 50 #include <linux/string_helpers.h> 51 #include <linux/async.h> 52 #include <linux/slab.h> 53 #include <linux/pm_runtime.h> 54 #include <asm/uaccess.h> 55 #include <asm/unaligned.h> 56 57 #include <scsi/scsi.h> 58 #include <scsi/scsi_cmnd.h> 59 #include <scsi/scsi_dbg.h> 60 #include <scsi/scsi_device.h> 61 #include <scsi/scsi_driver.h> 62 #include <scsi/scsi_eh.h> 63 #include <scsi/scsi_host.h> 64 #include <scsi/scsi_ioctl.h> 65 #include <scsi/scsicam.h> 66 67 #include "sd.h" 68 #include "scsi_logging.h" 69 70 MODULE_AUTHOR("Eric Youngdale"); 71 MODULE_DESCRIPTION("SCSI disk (sd) driver"); 72 MODULE_LICENSE("GPL"); 73 74 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR); 75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR); 76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR); 77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR); 78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR); 79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR); 80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR); 81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR); 82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR); 83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR); 84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR); 85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR); 86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR); 87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR); 88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR); 89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR); 90 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK); 91 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD); 92 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); 93 94 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) 95 #define SD_MINORS 16 96 #else 97 #define SD_MINORS 0 98 #endif 99 100 static void sd_config_discard(struct scsi_disk *, unsigned int); 101 static int sd_revalidate_disk(struct gendisk *); 102 static void sd_unlock_native_capacity(struct gendisk *disk); 103 static int sd_probe(struct device *); 104 static int sd_remove(struct device *); 105 static void sd_shutdown(struct device *); 106 static int sd_suspend(struct device *, pm_message_t state); 107 static int sd_resume(struct device *); 108 static void sd_rescan(struct device *); 109 static int sd_done(struct scsi_cmnd *); 110 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); 111 static void scsi_disk_release(struct device *cdev); 112 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); 113 static void sd_print_result(struct scsi_disk *, int); 114 115 static DEFINE_SPINLOCK(sd_index_lock); 116 static DEFINE_IDA(sd_index_ida); 117 118 /* This semaphore is used to mediate the 0->1 reference get in the 119 * face of object destruction (i.e. we can't allow a get on an 120 * object after last put) */ 121 static DEFINE_MUTEX(sd_ref_mutex); 122 123 static struct kmem_cache *sd_cdb_cache; 124 static mempool_t *sd_cdb_pool; 125 126 static const char *sd_cache_types[] = { 127 "write through", "none", "write back", 128 "write back, no read (daft)" 129 }; 130 131 static ssize_t 132 sd_store_cache_type(struct device *dev, struct device_attribute *attr, 133 const char *buf, size_t count) 134 { 135 int i, ct = -1, rcd, wce, sp; 136 struct scsi_disk *sdkp = to_scsi_disk(dev); 137 struct scsi_device *sdp = sdkp->device; 138 char buffer[64]; 139 char *buffer_data; 140 struct scsi_mode_data data; 141 struct scsi_sense_hdr sshdr; 142 int len; 143 144 if (sdp->type != TYPE_DISK) 145 /* no cache control on RBC devices; theoretically they 146 * can do it, but there's probably so many exceptions 147 * it's not worth the risk */ 148 return -EINVAL; 149 150 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) { 151 len = strlen(sd_cache_types[i]); 152 if (strncmp(sd_cache_types[i], buf, len) == 0 && 153 buf[len] == '\n') { 154 ct = i; 155 break; 156 } 157 } 158 if (ct < 0) 159 return -EINVAL; 160 rcd = ct & 0x01 ? 1 : 0; 161 wce = ct & 0x02 ? 1 : 0; 162 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT, 163 SD_MAX_RETRIES, &data, NULL)) 164 return -EINVAL; 165 len = min_t(size_t, sizeof(buffer), data.length - data.header_length - 166 data.block_descriptor_length); 167 buffer_data = buffer + data.header_length + 168 data.block_descriptor_length; 169 buffer_data[2] &= ~0x05; 170 buffer_data[2] |= wce << 2 | rcd; 171 sp = buffer_data[0] & 0x80 ? 1 : 0; 172 173 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT, 174 SD_MAX_RETRIES, &data, &sshdr)) { 175 if (scsi_sense_valid(&sshdr)) 176 sd_print_sense_hdr(sdkp, &sshdr); 177 return -EINVAL; 178 } 179 revalidate_disk(sdkp->disk); 180 return count; 181 } 182 183 static ssize_t 184 sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr, 185 const char *buf, size_t count) 186 { 187 struct scsi_disk *sdkp = to_scsi_disk(dev); 188 struct scsi_device *sdp = sdkp->device; 189 190 if (!capable(CAP_SYS_ADMIN)) 191 return -EACCES; 192 193 sdp->manage_start_stop = simple_strtoul(buf, NULL, 10); 194 195 return count; 196 } 197 198 static ssize_t 199 sd_store_allow_restart(struct device *dev, struct device_attribute *attr, 200 const char *buf, size_t count) 201 { 202 struct scsi_disk *sdkp = to_scsi_disk(dev); 203 struct scsi_device *sdp = sdkp->device; 204 205 if (!capable(CAP_SYS_ADMIN)) 206 return -EACCES; 207 208 if (sdp->type != TYPE_DISK) 209 return -EINVAL; 210 211 sdp->allow_restart = simple_strtoul(buf, NULL, 10); 212 213 return count; 214 } 215 216 static ssize_t 217 sd_show_cache_type(struct device *dev, struct device_attribute *attr, 218 char *buf) 219 { 220 struct scsi_disk *sdkp = to_scsi_disk(dev); 221 int ct = sdkp->RCD + 2*sdkp->WCE; 222 223 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]); 224 } 225 226 static ssize_t 227 sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf) 228 { 229 struct scsi_disk *sdkp = to_scsi_disk(dev); 230 231 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA); 232 } 233 234 static ssize_t 235 sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr, 236 char *buf) 237 { 238 struct scsi_disk *sdkp = to_scsi_disk(dev); 239 struct scsi_device *sdp = sdkp->device; 240 241 return snprintf(buf, 20, "%u\n", sdp->manage_start_stop); 242 } 243 244 static ssize_t 245 sd_show_allow_restart(struct device *dev, struct device_attribute *attr, 246 char *buf) 247 { 248 struct scsi_disk *sdkp = to_scsi_disk(dev); 249 250 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart); 251 } 252 253 static ssize_t 254 sd_show_protection_type(struct device *dev, struct device_attribute *attr, 255 char *buf) 256 { 257 struct scsi_disk *sdkp = to_scsi_disk(dev); 258 259 return snprintf(buf, 20, "%u\n", sdkp->protection_type); 260 } 261 262 static ssize_t 263 sd_show_protection_mode(struct device *dev, struct device_attribute *attr, 264 char *buf) 265 { 266 struct scsi_disk *sdkp = to_scsi_disk(dev); 267 struct scsi_device *sdp = sdkp->device; 268 unsigned int dif, dix; 269 270 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); 271 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type); 272 273 if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) { 274 dif = 0; 275 dix = 1; 276 } 277 278 if (!dif && !dix) 279 return snprintf(buf, 20, "none\n"); 280 281 return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif); 282 } 283 284 static ssize_t 285 sd_show_app_tag_own(struct device *dev, struct device_attribute *attr, 286 char *buf) 287 { 288 struct scsi_disk *sdkp = to_scsi_disk(dev); 289 290 return snprintf(buf, 20, "%u\n", sdkp->ATO); 291 } 292 293 static ssize_t 294 sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr, 295 char *buf) 296 { 297 struct scsi_disk *sdkp = to_scsi_disk(dev); 298 299 return snprintf(buf, 20, "%u\n", sdkp->lbpme); 300 } 301 302 static const char *lbp_mode[] = { 303 [SD_LBP_FULL] = "full", 304 [SD_LBP_UNMAP] = "unmap", 305 [SD_LBP_WS16] = "writesame_16", 306 [SD_LBP_WS10] = "writesame_10", 307 [SD_LBP_ZERO] = "writesame_zero", 308 [SD_LBP_DISABLE] = "disabled", 309 }; 310 311 static ssize_t 312 sd_show_provisioning_mode(struct device *dev, struct device_attribute *attr, 313 char *buf) 314 { 315 struct scsi_disk *sdkp = to_scsi_disk(dev); 316 317 return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]); 318 } 319 320 static ssize_t 321 sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr, 322 const char *buf, size_t count) 323 { 324 struct scsi_disk *sdkp = to_scsi_disk(dev); 325 struct scsi_device *sdp = sdkp->device; 326 327 if (!capable(CAP_SYS_ADMIN)) 328 return -EACCES; 329 330 if (sdp->type != TYPE_DISK) 331 return -EINVAL; 332 333 if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20)) 334 sd_config_discard(sdkp, SD_LBP_UNMAP); 335 else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20)) 336 sd_config_discard(sdkp, SD_LBP_WS16); 337 else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20)) 338 sd_config_discard(sdkp, SD_LBP_WS10); 339 else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20)) 340 sd_config_discard(sdkp, SD_LBP_ZERO); 341 else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20)) 342 sd_config_discard(sdkp, SD_LBP_DISABLE); 343 else 344 return -EINVAL; 345 346 return count; 347 } 348 349 static struct device_attribute sd_disk_attrs[] = { 350 __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, 351 sd_store_cache_type), 352 __ATTR(FUA, S_IRUGO, sd_show_fua, NULL), 353 __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart, 354 sd_store_allow_restart), 355 __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop, 356 sd_store_manage_start_stop), 357 __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL), 358 __ATTR(protection_mode, S_IRUGO, sd_show_protection_mode, NULL), 359 __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL), 360 __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), 361 __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode, 362 sd_store_provisioning_mode), 363 __ATTR_NULL, 364 }; 365 366 static struct class sd_disk_class = { 367 .name = "scsi_disk", 368 .owner = THIS_MODULE, 369 .dev_release = scsi_disk_release, 370 .dev_attrs = sd_disk_attrs, 371 }; 372 373 static struct scsi_driver sd_template = { 374 .owner = THIS_MODULE, 375 .gendrv = { 376 .name = "sd", 377 .probe = sd_probe, 378 .remove = sd_remove, 379 .suspend = sd_suspend, 380 .resume = sd_resume, 381 .shutdown = sd_shutdown, 382 }, 383 .rescan = sd_rescan, 384 .done = sd_done, 385 }; 386 387 /* 388 * Device no to disk mapping: 389 * 390 * major disc2 disc p1 391 * |............|.............|....|....| <- dev_t 392 * 31 20 19 8 7 4 3 0 393 * 394 * Inside a major, we have 16k disks, however mapped non- 395 * contiguously. The first 16 disks are for major0, the next 396 * ones with major1, ... Disk 256 is for major0 again, disk 272 397 * for major1, ... 398 * As we stay compatible with our numbering scheme, we can reuse 399 * the well-know SCSI majors 8, 65--71, 136--143. 400 */ 401 static int sd_major(int major_idx) 402 { 403 switch (major_idx) { 404 case 0: 405 return SCSI_DISK0_MAJOR; 406 case 1 ... 7: 407 return SCSI_DISK1_MAJOR + major_idx - 1; 408 case 8 ... 15: 409 return SCSI_DISK8_MAJOR + major_idx - 8; 410 default: 411 BUG(); 412 return 0; /* shut up gcc */ 413 } 414 } 415 416 static struct scsi_disk *__scsi_disk_get(struct gendisk *disk) 417 { 418 struct scsi_disk *sdkp = NULL; 419 420 if (disk->private_data) { 421 sdkp = scsi_disk(disk); 422 if (scsi_device_get(sdkp->device) == 0) 423 get_device(&sdkp->dev); 424 else 425 sdkp = NULL; 426 } 427 return sdkp; 428 } 429 430 static struct scsi_disk *scsi_disk_get(struct gendisk *disk) 431 { 432 struct scsi_disk *sdkp; 433 434 mutex_lock(&sd_ref_mutex); 435 sdkp = __scsi_disk_get(disk); 436 mutex_unlock(&sd_ref_mutex); 437 return sdkp; 438 } 439 440 static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev) 441 { 442 struct scsi_disk *sdkp; 443 444 mutex_lock(&sd_ref_mutex); 445 sdkp = dev_get_drvdata(dev); 446 if (sdkp) 447 sdkp = __scsi_disk_get(sdkp->disk); 448 mutex_unlock(&sd_ref_mutex); 449 return sdkp; 450 } 451 452 static void scsi_disk_put(struct scsi_disk *sdkp) 453 { 454 struct scsi_device *sdev = sdkp->device; 455 456 mutex_lock(&sd_ref_mutex); 457 put_device(&sdkp->dev); 458 scsi_device_put(sdev); 459 mutex_unlock(&sd_ref_mutex); 460 } 461 462 static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif) 463 { 464 unsigned int prot_op = SCSI_PROT_NORMAL; 465 unsigned int dix = scsi_prot_sg_count(scmd); 466 467 if (scmd->sc_data_direction == DMA_FROM_DEVICE) { 468 if (dif && dix) 469 prot_op = SCSI_PROT_READ_PASS; 470 else if (dif && !dix) 471 prot_op = SCSI_PROT_READ_STRIP; 472 else if (!dif && dix) 473 prot_op = SCSI_PROT_READ_INSERT; 474 } else { 475 if (dif && dix) 476 prot_op = SCSI_PROT_WRITE_PASS; 477 else if (dif && !dix) 478 prot_op = SCSI_PROT_WRITE_INSERT; 479 else if (!dif && dix) 480 prot_op = SCSI_PROT_WRITE_STRIP; 481 } 482 483 scsi_set_prot_op(scmd, prot_op); 484 scsi_set_prot_type(scmd, dif); 485 } 486 487 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) 488 { 489 struct request_queue *q = sdkp->disk->queue; 490 unsigned int logical_block_size = sdkp->device->sector_size; 491 unsigned int max_blocks = 0; 492 493 q->limits.discard_zeroes_data = sdkp->lbprz; 494 q->limits.discard_alignment = sdkp->unmap_alignment * 495 logical_block_size; 496 q->limits.discard_granularity = 497 max(sdkp->physical_block_size, 498 sdkp->unmap_granularity * logical_block_size); 499 500 switch (mode) { 501 502 case SD_LBP_DISABLE: 503 q->limits.max_discard_sectors = 0; 504 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q); 505 return; 506 507 case SD_LBP_UNMAP: 508 max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff); 509 break; 510 511 case SD_LBP_WS16: 512 max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff); 513 break; 514 515 case SD_LBP_WS10: 516 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); 517 break; 518 519 case SD_LBP_ZERO: 520 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); 521 q->limits.discard_zeroes_data = 1; 522 break; 523 } 524 525 q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9); 526 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); 527 528 sdkp->provisioning_mode = mode; 529 } 530 531 /** 532 * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device 533 * @sdp: scsi device to operate one 534 * @rq: Request to prepare 535 * 536 * Will issue either UNMAP or WRITE SAME(16) depending on preference 537 * indicated by target device. 538 **/ 539 static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) 540 { 541 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); 542 struct bio *bio = rq->bio; 543 sector_t sector = bio->bi_sector; 544 unsigned int nr_sectors = bio_sectors(bio); 545 unsigned int len; 546 int ret; 547 char *buf; 548 struct page *page; 549 550 if (sdkp->device->sector_size == 4096) { 551 sector >>= 3; 552 nr_sectors >>= 3; 553 } 554 555 rq->timeout = SD_TIMEOUT; 556 557 memset(rq->cmd, 0, rq->cmd_len); 558 559 page = alloc_page(GFP_ATOMIC | __GFP_ZERO); 560 if (!page) 561 return BLKPREP_DEFER; 562 563 switch (sdkp->provisioning_mode) { 564 case SD_LBP_UNMAP: 565 buf = page_address(page); 566 567 rq->cmd_len = 10; 568 rq->cmd[0] = UNMAP; 569 rq->cmd[8] = 24; 570 571 put_unaligned_be16(6 + 16, &buf[0]); 572 put_unaligned_be16(16, &buf[2]); 573 put_unaligned_be64(sector, &buf[8]); 574 put_unaligned_be32(nr_sectors, &buf[16]); 575 576 len = 24; 577 break; 578 579 case SD_LBP_WS16: 580 rq->cmd_len = 16; 581 rq->cmd[0] = WRITE_SAME_16; 582 rq->cmd[1] = 0x8; /* UNMAP */ 583 put_unaligned_be64(sector, &rq->cmd[2]); 584 put_unaligned_be32(nr_sectors, &rq->cmd[10]); 585 586 len = sdkp->device->sector_size; 587 break; 588 589 case SD_LBP_WS10: 590 case SD_LBP_ZERO: 591 rq->cmd_len = 10; 592 rq->cmd[0] = WRITE_SAME; 593 if (sdkp->provisioning_mode == SD_LBP_WS10) 594 rq->cmd[1] = 0x8; /* UNMAP */ 595 put_unaligned_be32(sector, &rq->cmd[2]); 596 put_unaligned_be16(nr_sectors, &rq->cmd[7]); 597 598 len = sdkp->device->sector_size; 599 break; 600 601 default: 602 ret = BLKPREP_KILL; 603 goto out; 604 } 605 606 blk_add_request_payload(rq, page, len); 607 ret = scsi_setup_blk_pc_cmnd(sdp, rq); 608 rq->buffer = page_address(page); 609 610 out: 611 if (ret != BLKPREP_OK) { 612 __free_page(page); 613 rq->buffer = NULL; 614 } 615 return ret; 616 } 617 618 static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq) 619 { 620 rq->timeout = SD_FLUSH_TIMEOUT; 621 rq->retries = SD_MAX_RETRIES; 622 rq->cmd[0] = SYNCHRONIZE_CACHE; 623 rq->cmd_len = 10; 624 625 return scsi_setup_blk_pc_cmnd(sdp, rq); 626 } 627 628 static void sd_unprep_fn(struct request_queue *q, struct request *rq) 629 { 630 if (rq->cmd_flags & REQ_DISCARD) { 631 free_page((unsigned long)rq->buffer); 632 rq->buffer = NULL; 633 } 634 } 635 636 /** 637 * sd_init_command - build a scsi (read or write) command from 638 * information in the request structure. 639 * @SCpnt: pointer to mid-level's per scsi command structure that 640 * contains request and into which the scsi command is written 641 * 642 * Returns 1 if successful and 0 if error (or cannot be done now). 643 **/ 644 static int sd_prep_fn(struct request_queue *q, struct request *rq) 645 { 646 struct scsi_cmnd *SCpnt; 647 struct scsi_device *sdp = q->queuedata; 648 struct gendisk *disk = rq->rq_disk; 649 struct scsi_disk *sdkp; 650 sector_t block = blk_rq_pos(rq); 651 sector_t threshold; 652 unsigned int this_count = blk_rq_sectors(rq); 653 int ret, host_dif; 654 unsigned char protect; 655 656 /* 657 * Discard request come in as REQ_TYPE_FS but we turn them into 658 * block PC requests to make life easier. 659 */ 660 if (rq->cmd_flags & REQ_DISCARD) { 661 ret = scsi_setup_discard_cmnd(sdp, rq); 662 goto out; 663 } else if (rq->cmd_flags & REQ_FLUSH) { 664 ret = scsi_setup_flush_cmnd(sdp, rq); 665 goto out; 666 } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { 667 ret = scsi_setup_blk_pc_cmnd(sdp, rq); 668 goto out; 669 } else if (rq->cmd_type != REQ_TYPE_FS) { 670 ret = BLKPREP_KILL; 671 goto out; 672 } 673 ret = scsi_setup_fs_cmnd(sdp, rq); 674 if (ret != BLKPREP_OK) 675 goto out; 676 SCpnt = rq->special; 677 sdkp = scsi_disk(disk); 678 679 /* from here on until we're complete, any goto out 680 * is used for a killable error condition */ 681 ret = BLKPREP_KILL; 682 683 SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt, 684 "sd_init_command: block=%llu, " 685 "count=%d\n", 686 (unsigned long long)block, 687 this_count)); 688 689 if (!sdp || !scsi_device_online(sdp) || 690 block + blk_rq_sectors(rq) > get_capacity(disk)) { 691 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, 692 "Finishing %u sectors\n", 693 blk_rq_sectors(rq))); 694 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, 695 "Retry with 0x%p\n", SCpnt)); 696 goto out; 697 } 698 699 if (sdp->changed) { 700 /* 701 * quietly refuse to do anything to a changed disc until 702 * the changed bit has been reset 703 */ 704 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */ 705 goto out; 706 } 707 708 /* 709 * Some SD card readers can't handle multi-sector accesses which touch 710 * the last one or two hardware sectors. Split accesses as needed. 711 */ 712 threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * 713 (sdp->sector_size / 512); 714 715 if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { 716 if (block < threshold) { 717 /* Access up to the threshold but not beyond */ 718 this_count = threshold - block; 719 } else { 720 /* Access only a single hardware sector */ 721 this_count = sdp->sector_size / 512; 722 } 723 } 724 725 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", 726 (unsigned long long)block)); 727 728 /* 729 * If we have a 1K hardware sectorsize, prevent access to single 730 * 512 byte sectors. In theory we could handle this - in fact 731 * the scsi cdrom driver must be able to handle this because 732 * we typically use 1K blocksizes, and cdroms typically have 733 * 2K hardware sectorsizes. Of course, things are simpler 734 * with the cdrom, since it is read-only. For performance 735 * reasons, the filesystems should be able to handle this 736 * and not force the scsi disk driver to use bounce buffers 737 * for this. 738 */ 739 if (sdp->sector_size == 1024) { 740 if ((block & 1) || (blk_rq_sectors(rq) & 1)) { 741 scmd_printk(KERN_ERR, SCpnt, 742 "Bad block number requested\n"); 743 goto out; 744 } else { 745 block = block >> 1; 746 this_count = this_count >> 1; 747 } 748 } 749 if (sdp->sector_size == 2048) { 750 if ((block & 3) || (blk_rq_sectors(rq) & 3)) { 751 scmd_printk(KERN_ERR, SCpnt, 752 "Bad block number requested\n"); 753 goto out; 754 } else { 755 block = block >> 2; 756 this_count = this_count >> 2; 757 } 758 } 759 if (sdp->sector_size == 4096) { 760 if ((block & 7) || (blk_rq_sectors(rq) & 7)) { 761 scmd_printk(KERN_ERR, SCpnt, 762 "Bad block number requested\n"); 763 goto out; 764 } else { 765 block = block >> 3; 766 this_count = this_count >> 3; 767 } 768 } 769 if (rq_data_dir(rq) == WRITE) { 770 if (!sdp->writeable) { 771 goto out; 772 } 773 SCpnt->cmnd[0] = WRITE_6; 774 SCpnt->sc_data_direction = DMA_TO_DEVICE; 775 776 if (blk_integrity_rq(rq) && 777 sd_dif_prepare(rq, block, sdp->sector_size) == -EIO) 778 goto out; 779 780 } else if (rq_data_dir(rq) == READ) { 781 SCpnt->cmnd[0] = READ_6; 782 SCpnt->sc_data_direction = DMA_FROM_DEVICE; 783 } else { 784 scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags); 785 goto out; 786 } 787 788 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, 789 "%s %d/%u 512 byte blocks.\n", 790 (rq_data_dir(rq) == WRITE) ? 791 "writing" : "reading", this_count, 792 blk_rq_sectors(rq))); 793 794 /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ 795 host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); 796 if (host_dif) 797 protect = 1 << 5; 798 else 799 protect = 0; 800 801 if (host_dif == SD_DIF_TYPE2_PROTECTION) { 802 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC); 803 804 if (unlikely(SCpnt->cmnd == NULL)) { 805 ret = BLKPREP_DEFER; 806 goto out; 807 } 808 809 SCpnt->cmd_len = SD_EXT_CDB_SIZE; 810 memset(SCpnt->cmnd, 0, SCpnt->cmd_len); 811 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD; 812 SCpnt->cmnd[7] = 0x18; 813 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32; 814 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); 815 816 /* LBA */ 817 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0; 818 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0; 819 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0; 820 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0; 821 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff; 822 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff; 823 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff; 824 SCpnt->cmnd[19] = (unsigned char) block & 0xff; 825 826 /* Expected Indirect LBA */ 827 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff; 828 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff; 829 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff; 830 SCpnt->cmnd[23] = (unsigned char) block & 0xff; 831 832 /* Transfer length */ 833 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff; 834 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff; 835 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff; 836 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff; 837 } else if (block > 0xffffffff) { 838 SCpnt->cmnd[0] += READ_16 - READ_6; 839 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); 840 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0; 841 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0; 842 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0; 843 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0; 844 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff; 845 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff; 846 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff; 847 SCpnt->cmnd[9] = (unsigned char) block & 0xff; 848 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff; 849 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff; 850 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff; 851 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff; 852 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0; 853 } else if ((this_count > 0xff) || (block > 0x1fffff) || 854 scsi_device_protection(SCpnt->device) || 855 SCpnt->device->use_10_for_rw) { 856 if (this_count > 0xffff) 857 this_count = 0xffff; 858 859 SCpnt->cmnd[0] += READ_10 - READ_6; 860 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0); 861 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff; 862 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff; 863 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff; 864 SCpnt->cmnd[5] = (unsigned char) block & 0xff; 865 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0; 866 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff; 867 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff; 868 } else { 869 if (unlikely(rq->cmd_flags & REQ_FUA)) { 870 /* 871 * This happens only if this drive failed 872 * 10byte rw command with ILLEGAL_REQUEST 873 * during operation and thus turned off 874 * use_10_for_rw. 875 */ 876 scmd_printk(KERN_ERR, SCpnt, 877 "FUA write on READ/WRITE(6) drive\n"); 878 goto out; 879 } 880 881 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f); 882 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff); 883 SCpnt->cmnd[3] = (unsigned char) block & 0xff; 884 SCpnt->cmnd[4] = (unsigned char) this_count; 885 SCpnt->cmnd[5] = 0; 886 } 887 SCpnt->sdb.length = this_count * sdp->sector_size; 888 889 /* If DIF or DIX is enabled, tell HBA how to handle request */ 890 if (host_dif || scsi_prot_sg_count(SCpnt)) 891 sd_prot_op(SCpnt, host_dif); 892 893 /* 894 * We shouldn't disconnect in the middle of a sector, so with a dumb 895 * host adapter, it's safe to assume that we can at least transfer 896 * this many bytes between each connect / disconnect. 897 */ 898 SCpnt->transfersize = sdp->sector_size; 899 SCpnt->underflow = this_count << 9; 900 SCpnt->allowed = SD_MAX_RETRIES; 901 902 /* 903 * This indicates that the command is ready from our end to be 904 * queued. 905 */ 906 ret = BLKPREP_OK; 907 out: 908 return scsi_prep_return(q, rq, ret); 909 } 910 911 /** 912 * sd_open - open a scsi disk device 913 * @inode: only i_rdev member may be used 914 * @filp: only f_mode and f_flags may be used 915 * 916 * Returns 0 if successful. Returns a negated errno value in case 917 * of error. 918 * 919 * Note: This can be called from a user context (e.g. fsck(1) ) 920 * or from within the kernel (e.g. as a result of a mount(1) ). 921 * In the latter case @inode and @filp carry an abridged amount 922 * of information as noted above. 923 * 924 * Locking: called with bdev->bd_mutex held. 925 **/ 926 static int sd_open(struct block_device *bdev, fmode_t mode) 927 { 928 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk); 929 struct scsi_device *sdev; 930 int retval; 931 932 if (!sdkp) 933 return -ENXIO; 934 935 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n")); 936 937 sdev = sdkp->device; 938 939 retval = scsi_autopm_get_device(sdev); 940 if (retval) 941 goto error_autopm; 942 943 /* 944 * If the device is in error recovery, wait until it is done. 945 * If the device is offline, then disallow any access to it. 946 */ 947 retval = -ENXIO; 948 if (!scsi_block_when_processing_errors(sdev)) 949 goto error_out; 950 951 if (sdev->removable || sdkp->write_prot) 952 check_disk_change(bdev); 953 954 /* 955 * If the drive is empty, just let the open fail. 956 */ 957 retval = -ENOMEDIUM; 958 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY)) 959 goto error_out; 960 961 /* 962 * If the device has the write protect tab set, have the open fail 963 * if the user expects to be able to write to the thing. 964 */ 965 retval = -EROFS; 966 if (sdkp->write_prot && (mode & FMODE_WRITE)) 967 goto error_out; 968 969 /* 970 * It is possible that the disk changing stuff resulted in 971 * the device being taken offline. If this is the case, 972 * report this to the user, and don't pretend that the 973 * open actually succeeded. 974 */ 975 retval = -ENXIO; 976 if (!scsi_device_online(sdev)) 977 goto error_out; 978 979 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) { 980 if (scsi_block_when_processing_errors(sdev)) 981 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT); 982 } 983 984 return 0; 985 986 error_out: 987 scsi_autopm_put_device(sdev); 988 error_autopm: 989 scsi_disk_put(sdkp); 990 return retval; 991 } 992 993 /** 994 * sd_release - invoked when the (last) close(2) is called on this 995 * scsi disk. 996 * @inode: only i_rdev member may be used 997 * @filp: only f_mode and f_flags may be used 998 * 999 * Returns 0. 1000 * 1001 * Note: may block (uninterruptible) if error recovery is underway 1002 * on this disk. 1003 * 1004 * Locking: called with bdev->bd_mutex held. 1005 **/ 1006 static int sd_release(struct gendisk *disk, fmode_t mode) 1007 { 1008 struct scsi_disk *sdkp = scsi_disk(disk); 1009 struct scsi_device *sdev = sdkp->device; 1010 1011 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n")); 1012 1013 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) { 1014 if (scsi_block_when_processing_errors(sdev)) 1015 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); 1016 } 1017 1018 /* 1019 * XXX and what if there are packets in flight and this close() 1020 * XXX is followed by a "rmmod sd_mod"? 1021 */ 1022 1023 scsi_autopm_put_device(sdev); 1024 scsi_disk_put(sdkp); 1025 return 0; 1026 } 1027 1028 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo) 1029 { 1030 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk); 1031 struct scsi_device *sdp = sdkp->device; 1032 struct Scsi_Host *host = sdp->host; 1033 int diskinfo[4]; 1034 1035 /* default to most commonly used values */ 1036 diskinfo[0] = 0x40; /* 1 << 6 */ 1037 diskinfo[1] = 0x20; /* 1 << 5 */ 1038 diskinfo[2] = sdkp->capacity >> 11; 1039 1040 /* override with calculated, extended default, or driver values */ 1041 if (host->hostt->bios_param) 1042 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo); 1043 else 1044 scsicam_bios_param(bdev, sdkp->capacity, diskinfo); 1045 1046 geo->heads = diskinfo[0]; 1047 geo->sectors = diskinfo[1]; 1048 geo->cylinders = diskinfo[2]; 1049 return 0; 1050 } 1051 1052 /** 1053 * sd_ioctl - process an ioctl 1054 * @inode: only i_rdev/i_bdev members may be used 1055 * @filp: only f_mode and f_flags may be used 1056 * @cmd: ioctl command number 1057 * @arg: this is third argument given to ioctl(2) system call. 1058 * Often contains a pointer. 1059 * 1060 * Returns 0 if successful (some ioctls return positive numbers on 1061 * success as well). Returns a negated errno value in case of error. 1062 * 1063 * Note: most ioctls are forward onto the block subsystem or further 1064 * down in the scsi subsystem. 1065 **/ 1066 static int sd_ioctl(struct block_device *bdev, fmode_t mode, 1067 unsigned int cmd, unsigned long arg) 1068 { 1069 struct gendisk *disk = bdev->bd_disk; 1070 struct scsi_disk *sdkp = scsi_disk(disk); 1071 struct scsi_device *sdp = sdkp->device; 1072 void __user *p = (void __user *)arg; 1073 int error; 1074 1075 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, " 1076 "cmd=0x%x\n", disk->disk_name, cmd)); 1077 1078 error = scsi_verify_blk_ioctl(bdev, cmd); 1079 if (error < 0) 1080 return error; 1081 1082 /* 1083 * If we are in the middle of error recovery, don't let anyone 1084 * else try and use this device. Also, if error recovery fails, it 1085 * may try and take the device offline, in which case all further 1086 * access to the device is prohibited. 1087 */ 1088 error = scsi_nonblockable_ioctl(sdp, cmd, p, 1089 (mode & FMODE_NDELAY) != 0); 1090 if (!scsi_block_when_processing_errors(sdp) || !error) 1091 goto out; 1092 1093 /* 1094 * Send SCSI addressing ioctls directly to mid level, send other 1095 * ioctls to block level and then onto mid level if they can't be 1096 * resolved. 1097 */ 1098 switch (cmd) { 1099 case SCSI_IOCTL_GET_IDLUN: 1100 case SCSI_IOCTL_GET_BUS_NUMBER: 1101 error = scsi_ioctl(sdp, cmd, p); 1102 break; 1103 default: 1104 error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p); 1105 if (error != -ENOTTY) 1106 break; 1107 error = scsi_ioctl(sdp, cmd, p); 1108 break; 1109 } 1110 out: 1111 return error; 1112 } 1113 1114 static void set_media_not_present(struct scsi_disk *sdkp) 1115 { 1116 if (sdkp->media_present) 1117 sdkp->device->changed = 1; 1118 1119 if (sdkp->device->removable) { 1120 sdkp->media_present = 0; 1121 sdkp->capacity = 0; 1122 } 1123 } 1124 1125 static int media_not_present(struct scsi_disk *sdkp, 1126 struct scsi_sense_hdr *sshdr) 1127 { 1128 if (!scsi_sense_valid(sshdr)) 1129 return 0; 1130 1131 /* not invoked for commands that could return deferred errors */ 1132 switch (sshdr->sense_key) { 1133 case UNIT_ATTENTION: 1134 case NOT_READY: 1135 /* medium not present */ 1136 if (sshdr->asc == 0x3A) { 1137 set_media_not_present(sdkp); 1138 return 1; 1139 } 1140 } 1141 return 0; 1142 } 1143 1144 /** 1145 * sd_check_events - check media events 1146 * @disk: kernel device descriptor 1147 * @clearing: disk events currently being cleared 1148 * 1149 * Returns mask of DISK_EVENT_*. 1150 * 1151 * Note: this function is invoked from the block subsystem. 1152 **/ 1153 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) 1154 { 1155 struct scsi_disk *sdkp = scsi_disk(disk); 1156 struct scsi_device *sdp = sdkp->device; 1157 struct scsi_sense_hdr *sshdr = NULL; 1158 int retval; 1159 1160 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); 1161 1162 /* 1163 * If the device is offline, don't send any commands - just pretend as 1164 * if the command failed. If the device ever comes back online, we 1165 * can deal with it then. It is only because of unrecoverable errors 1166 * that we would ever take a device offline in the first place. 1167 */ 1168 if (!scsi_device_online(sdp)) { 1169 set_media_not_present(sdkp); 1170 goto out; 1171 } 1172 1173 /* 1174 * Using TEST_UNIT_READY enables differentiation between drive with 1175 * no cartridge loaded - NOT READY, drive with changed cartridge - 1176 * UNIT ATTENTION, or with same cartridge - GOOD STATUS. 1177 * 1178 * Drives that auto spin down. eg iomega jaz 1G, will be started 1179 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever 1180 * sd_revalidate() is called. 1181 */ 1182 retval = -ENODEV; 1183 1184 if (scsi_block_when_processing_errors(sdp)) { 1185 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); 1186 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, 1187 sshdr); 1188 } 1189 1190 /* failed to execute TUR, assume media not present */ 1191 if (host_byte(retval)) { 1192 set_media_not_present(sdkp); 1193 goto out; 1194 } 1195 1196 if (media_not_present(sdkp, sshdr)) 1197 goto out; 1198 1199 /* 1200 * For removable scsi disk we have to recognise the presence 1201 * of a disk in the drive. 1202 */ 1203 if (!sdkp->media_present) 1204 sdp->changed = 1; 1205 sdkp->media_present = 1; 1206 out: 1207 /* 1208 * sdp->changed is set under the following conditions: 1209 * 1210 * Medium present state has changed in either direction. 1211 * Device has indicated UNIT_ATTENTION. 1212 */ 1213 kfree(sshdr); 1214 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; 1215 sdp->changed = 0; 1216 return retval; 1217 } 1218 1219 static int sd_sync_cache(struct scsi_disk *sdkp) 1220 { 1221 int retries, res; 1222 struct scsi_device *sdp = sdkp->device; 1223 struct scsi_sense_hdr sshdr; 1224 1225 if (!scsi_device_online(sdp)) 1226 return -ENODEV; 1227 1228 1229 for (retries = 3; retries > 0; --retries) { 1230 unsigned char cmd[10] = { 0 }; 1231 1232 cmd[0] = SYNCHRONIZE_CACHE; 1233 /* 1234 * Leave the rest of the command zero to indicate 1235 * flush everything. 1236 */ 1237 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, 1238 SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL); 1239 if (res == 0) 1240 break; 1241 } 1242 1243 if (res) { 1244 sd_print_result(sdkp, res); 1245 if (driver_byte(res) & DRIVER_SENSE) 1246 sd_print_sense_hdr(sdkp, &sshdr); 1247 } 1248 1249 if (res) 1250 return -EIO; 1251 return 0; 1252 } 1253 1254 static void sd_rescan(struct device *dev) 1255 { 1256 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); 1257 1258 if (sdkp) { 1259 revalidate_disk(sdkp->disk); 1260 scsi_disk_put(sdkp); 1261 } 1262 } 1263 1264 1265 #ifdef CONFIG_COMPAT 1266 /* 1267 * This gets directly called from VFS. When the ioctl 1268 * is not recognized we go back to the other translation paths. 1269 */ 1270 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode, 1271 unsigned int cmd, unsigned long arg) 1272 { 1273 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device; 1274 int ret; 1275 1276 ret = scsi_verify_blk_ioctl(bdev, cmd); 1277 if (ret < 0) 1278 return ret; 1279 1280 /* 1281 * If we are in the middle of error recovery, don't let anyone 1282 * else try and use this device. Also, if error recovery fails, it 1283 * may try and take the device offline, in which case all further 1284 * access to the device is prohibited. 1285 */ 1286 if (!scsi_block_when_processing_errors(sdev)) 1287 return -ENODEV; 1288 1289 if (sdev->host->hostt->compat_ioctl) { 1290 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg); 1291 1292 return ret; 1293 } 1294 1295 /* 1296 * Let the static ioctl translation table take care of it. 1297 */ 1298 return -ENOIOCTLCMD; 1299 } 1300 #endif 1301 1302 static const struct block_device_operations sd_fops = { 1303 .owner = THIS_MODULE, 1304 .open = sd_open, 1305 .release = sd_release, 1306 .ioctl = sd_ioctl, 1307 .getgeo = sd_getgeo, 1308 #ifdef CONFIG_COMPAT 1309 .compat_ioctl = sd_compat_ioctl, 1310 #endif 1311 .check_events = sd_check_events, 1312 .revalidate_disk = sd_revalidate_disk, 1313 .unlock_native_capacity = sd_unlock_native_capacity, 1314 }; 1315 1316 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) 1317 { 1318 u64 start_lba = blk_rq_pos(scmd->request); 1319 u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512); 1320 u64 bad_lba; 1321 int info_valid; 1322 /* 1323 * resid is optional but mostly filled in. When it's unused, 1324 * its value is zero, so we assume the whole buffer transferred 1325 */ 1326 unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd); 1327 unsigned int good_bytes; 1328 1329 if (scmd->request->cmd_type != REQ_TYPE_FS) 1330 return 0; 1331 1332 info_valid = scsi_get_sense_info_fld(scmd->sense_buffer, 1333 SCSI_SENSE_BUFFERSIZE, 1334 &bad_lba); 1335 if (!info_valid) 1336 return 0; 1337 1338 if (scsi_bufflen(scmd) <= scmd->device->sector_size) 1339 return 0; 1340 1341 if (scmd->device->sector_size < 512) { 1342 /* only legitimate sector_size here is 256 */ 1343 start_lba <<= 1; 1344 end_lba <<= 1; 1345 } else { 1346 /* be careful ... don't want any overflows */ 1347 u64 factor = scmd->device->sector_size / 512; 1348 do_div(start_lba, factor); 1349 do_div(end_lba, factor); 1350 } 1351 1352 /* The bad lba was reported incorrectly, we have no idea where 1353 * the error is. 1354 */ 1355 if (bad_lba < start_lba || bad_lba >= end_lba) 1356 return 0; 1357 1358 /* This computation should always be done in terms of 1359 * the resolution of the device's medium. 1360 */ 1361 good_bytes = (bad_lba - start_lba) * scmd->device->sector_size; 1362 return min(good_bytes, transferred); 1363 } 1364 1365 /** 1366 * sd_done - bottom half handler: called when the lower level 1367 * driver has completed (successfully or otherwise) a scsi command. 1368 * @SCpnt: mid-level's per command structure. 1369 * 1370 * Note: potentially run from within an ISR. Must not block. 1371 **/ 1372 static int sd_done(struct scsi_cmnd *SCpnt) 1373 { 1374 int result = SCpnt->result; 1375 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); 1376 struct scsi_sense_hdr sshdr; 1377 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); 1378 int sense_valid = 0; 1379 int sense_deferred = 0; 1380 unsigned char op = SCpnt->cmnd[0]; 1381 1382 if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result) 1383 scsi_set_resid(SCpnt, 0); 1384 1385 if (result) { 1386 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); 1387 if (sense_valid) 1388 sense_deferred = scsi_sense_is_deferred(&sshdr); 1389 } 1390 #ifdef CONFIG_SCSI_LOGGING 1391 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt)); 1392 if (sense_valid) { 1393 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt, 1394 "sd_done: sb[respc,sk,asc," 1395 "ascq]=%x,%x,%x,%x\n", 1396 sshdr.response_code, 1397 sshdr.sense_key, sshdr.asc, 1398 sshdr.ascq)); 1399 } 1400 #endif 1401 if (driver_byte(result) != DRIVER_SENSE && 1402 (!sense_valid || sense_deferred)) 1403 goto out; 1404 1405 switch (sshdr.sense_key) { 1406 case HARDWARE_ERROR: 1407 case MEDIUM_ERROR: 1408 good_bytes = sd_completed_bytes(SCpnt); 1409 break; 1410 case RECOVERED_ERROR: 1411 good_bytes = scsi_bufflen(SCpnt); 1412 break; 1413 case NO_SENSE: 1414 /* This indicates a false check condition, so ignore it. An 1415 * unknown amount of data was transferred so treat it as an 1416 * error. 1417 */ 1418 scsi_print_sense("sd", SCpnt); 1419 SCpnt->result = 0; 1420 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); 1421 break; 1422 case ABORTED_COMMAND: 1423 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */ 1424 good_bytes = sd_completed_bytes(SCpnt); 1425 break; 1426 case ILLEGAL_REQUEST: 1427 if (sshdr.asc == 0x10) /* DIX: Host detected corruption */ 1428 good_bytes = sd_completed_bytes(SCpnt); 1429 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ 1430 if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) && 1431 (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME)) 1432 sd_config_discard(sdkp, SD_LBP_DISABLE); 1433 break; 1434 default: 1435 break; 1436 } 1437 out: 1438 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt)) 1439 sd_dif_complete(SCpnt, good_bytes); 1440 1441 if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type) 1442 == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd) { 1443 1444 /* We have to print a failed command here as the 1445 * extended CDB gets freed before scsi_io_completion() 1446 * is called. 1447 */ 1448 if (result) 1449 scsi_print_command(SCpnt); 1450 1451 mempool_free(SCpnt->cmnd, sd_cdb_pool); 1452 SCpnt->cmnd = NULL; 1453 SCpnt->cmd_len = 0; 1454 } 1455 1456 return good_bytes; 1457 } 1458 1459 /* 1460 * spinup disk - called only in sd_revalidate_disk() 1461 */ 1462 static void 1463 sd_spinup_disk(struct scsi_disk *sdkp) 1464 { 1465 unsigned char cmd[10]; 1466 unsigned long spintime_expire = 0; 1467 int retries, spintime; 1468 unsigned int the_result; 1469 struct scsi_sense_hdr sshdr; 1470 int sense_valid = 0; 1471 1472 spintime = 0; 1473 1474 /* Spin up drives, as required. Only do this at boot time */ 1475 /* Spinup needs to be done for module loads too. */ 1476 do { 1477 retries = 0; 1478 1479 do { 1480 cmd[0] = TEST_UNIT_READY; 1481 memset((void *) &cmd[1], 0, 9); 1482 1483 the_result = scsi_execute_req(sdkp->device, cmd, 1484 DMA_NONE, NULL, 0, 1485 &sshdr, SD_TIMEOUT, 1486 SD_MAX_RETRIES, NULL); 1487 1488 /* 1489 * If the drive has indicated to us that it 1490 * doesn't have any media in it, don't bother 1491 * with any more polling. 1492 */ 1493 if (media_not_present(sdkp, &sshdr)) 1494 return; 1495 1496 if (the_result) 1497 sense_valid = scsi_sense_valid(&sshdr); 1498 retries++; 1499 } while (retries < 3 && 1500 (!scsi_status_is_good(the_result) || 1501 ((driver_byte(the_result) & DRIVER_SENSE) && 1502 sense_valid && sshdr.sense_key == UNIT_ATTENTION))); 1503 1504 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) { 1505 /* no sense, TUR either succeeded or failed 1506 * with a status error */ 1507 if(!spintime && !scsi_status_is_good(the_result)) { 1508 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); 1509 sd_print_result(sdkp, the_result); 1510 } 1511 break; 1512 } 1513 1514 /* 1515 * The device does not want the automatic start to be issued. 1516 */ 1517 if (sdkp->device->no_start_on_add) 1518 break; 1519 1520 if (sense_valid && sshdr.sense_key == NOT_READY) { 1521 if (sshdr.asc == 4 && sshdr.ascq == 3) 1522 break; /* manual intervention required */ 1523 if (sshdr.asc == 4 && sshdr.ascq == 0xb) 1524 break; /* standby */ 1525 if (sshdr.asc == 4 && sshdr.ascq == 0xc) 1526 break; /* unavailable */ 1527 /* 1528 * Issue command to spin up drive when not ready 1529 */ 1530 if (!spintime) { 1531 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); 1532 cmd[0] = START_STOP; 1533 cmd[1] = 1; /* Return immediately */ 1534 memset((void *) &cmd[2], 0, 8); 1535 cmd[4] = 1; /* Start spin cycle */ 1536 if (sdkp->device->start_stop_pwr_cond) 1537 cmd[4] |= 1 << 4; 1538 scsi_execute_req(sdkp->device, cmd, DMA_NONE, 1539 NULL, 0, &sshdr, 1540 SD_TIMEOUT, SD_MAX_RETRIES, 1541 NULL); 1542 spintime_expire = jiffies + 100 * HZ; 1543 spintime = 1; 1544 } 1545 /* Wait 1 second for next try */ 1546 msleep(1000); 1547 printk("."); 1548 1549 /* 1550 * Wait for USB flash devices with slow firmware. 1551 * Yes, this sense key/ASC combination shouldn't 1552 * occur here. It's characteristic of these devices. 1553 */ 1554 } else if (sense_valid && 1555 sshdr.sense_key == UNIT_ATTENTION && 1556 sshdr.asc == 0x28) { 1557 if (!spintime) { 1558 spintime_expire = jiffies + 5 * HZ; 1559 spintime = 1; 1560 } 1561 /* Wait 1 second for next try */ 1562 msleep(1000); 1563 } else { 1564 /* we don't understand the sense code, so it's 1565 * probably pointless to loop */ 1566 if(!spintime) { 1567 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); 1568 sd_print_sense_hdr(sdkp, &sshdr); 1569 } 1570 break; 1571 } 1572 1573 } while (spintime && time_before_eq(jiffies, spintime_expire)); 1574 1575 if (spintime) { 1576 if (scsi_status_is_good(the_result)) 1577 printk("ready\n"); 1578 else 1579 printk("not responding...\n"); 1580 } 1581 } 1582 1583 1584 /* 1585 * Determine whether disk supports Data Integrity Field. 1586 */ 1587 static void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer) 1588 { 1589 struct scsi_device *sdp = sdkp->device; 1590 u8 type; 1591 1592 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) 1593 return; 1594 1595 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */ 1596 1597 if (type == sdkp->protection_type || !sdkp->first_scan) 1598 return; 1599 1600 sdkp->protection_type = type; 1601 1602 if (type > SD_DIF_TYPE3_PROTECTION) { 1603 sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \ 1604 "protection type %u. Disabling disk!\n", type); 1605 sdkp->capacity = 0; 1606 return; 1607 } 1608 1609 if (scsi_host_dif_capable(sdp->host, type)) 1610 sd_printk(KERN_NOTICE, sdkp, 1611 "Enabling DIF Type %u protection\n", type); 1612 else 1613 sd_printk(KERN_NOTICE, sdkp, 1614 "Disabling DIF Type %u protection\n", type); 1615 } 1616 1617 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, 1618 struct scsi_sense_hdr *sshdr, int sense_valid, 1619 int the_result) 1620 { 1621 sd_print_result(sdkp, the_result); 1622 if (driver_byte(the_result) & DRIVER_SENSE) 1623 sd_print_sense_hdr(sdkp, sshdr); 1624 else 1625 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n"); 1626 1627 /* 1628 * Set dirty bit for removable devices if not ready - 1629 * sometimes drives will not report this properly. 1630 */ 1631 if (sdp->removable && 1632 sense_valid && sshdr->sense_key == NOT_READY) 1633 set_media_not_present(sdkp); 1634 1635 /* 1636 * We used to set media_present to 0 here to indicate no media 1637 * in the drive, but some drives fail read capacity even with 1638 * media present, so we can't do that. 1639 */ 1640 sdkp->capacity = 0; /* unknown mapped to zero - as usual */ 1641 } 1642 1643 #define RC16_LEN 32 1644 #if RC16_LEN > SD_BUF_SIZE 1645 #error RC16_LEN must not be more than SD_BUF_SIZE 1646 #endif 1647 1648 #define READ_CAPACITY_RETRIES_ON_RESET 10 1649 1650 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp, 1651 unsigned char *buffer) 1652 { 1653 unsigned char cmd[16]; 1654 struct scsi_sense_hdr sshdr; 1655 int sense_valid = 0; 1656 int the_result; 1657 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; 1658 unsigned int alignment; 1659 unsigned long long lba; 1660 unsigned sector_size; 1661 1662 if (sdp->no_read_capacity_16) 1663 return -EINVAL; 1664 1665 do { 1666 memset(cmd, 0, 16); 1667 cmd[0] = SERVICE_ACTION_IN; 1668 cmd[1] = SAI_READ_CAPACITY_16; 1669 cmd[13] = RC16_LEN; 1670 memset(buffer, 0, RC16_LEN); 1671 1672 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, 1673 buffer, RC16_LEN, &sshdr, 1674 SD_TIMEOUT, SD_MAX_RETRIES, NULL); 1675 1676 if (media_not_present(sdkp, &sshdr)) 1677 return -ENODEV; 1678 1679 if (the_result) { 1680 sense_valid = scsi_sense_valid(&sshdr); 1681 if (sense_valid && 1682 sshdr.sense_key == ILLEGAL_REQUEST && 1683 (sshdr.asc == 0x20 || sshdr.asc == 0x24) && 1684 sshdr.ascq == 0x00) 1685 /* Invalid Command Operation Code or 1686 * Invalid Field in CDB, just retry 1687 * silently with RC10 */ 1688 return -EINVAL; 1689 if (sense_valid && 1690 sshdr.sense_key == UNIT_ATTENTION && 1691 sshdr.asc == 0x29 && sshdr.ascq == 0x00) 1692 /* Device reset might occur several times, 1693 * give it one more chance */ 1694 if (--reset_retries > 0) 1695 continue; 1696 } 1697 retries--; 1698 1699 } while (the_result && retries); 1700 1701 if (the_result) { 1702 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n"); 1703 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); 1704 return -EINVAL; 1705 } 1706 1707 sector_size = get_unaligned_be32(&buffer[8]); 1708 lba = get_unaligned_be64(&buffer[0]); 1709 1710 sd_read_protection_type(sdkp, buffer); 1711 1712 if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) { 1713 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " 1714 "kernel compiled with support for large block " 1715 "devices.\n"); 1716 sdkp->capacity = 0; 1717 return -EOVERFLOW; 1718 } 1719 1720 /* Logical blocks per physical block exponent */ 1721 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size; 1722 1723 /* Lowest aligned logical block */ 1724 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size; 1725 blk_queue_alignment_offset(sdp->request_queue, alignment); 1726 if (alignment && sdkp->first_scan) 1727 sd_printk(KERN_NOTICE, sdkp, 1728 "physical block alignment offset: %u\n", alignment); 1729 1730 if (buffer[14] & 0x80) { /* LBPME */ 1731 sdkp->lbpme = 1; 1732 1733 if (buffer[14] & 0x40) /* LBPRZ */ 1734 sdkp->lbprz = 1; 1735 1736 sd_config_discard(sdkp, SD_LBP_WS16); 1737 } 1738 1739 sdkp->capacity = lba + 1; 1740 return sector_size; 1741 } 1742 1743 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp, 1744 unsigned char *buffer) 1745 { 1746 unsigned char cmd[16]; 1747 struct scsi_sense_hdr sshdr; 1748 int sense_valid = 0; 1749 int the_result; 1750 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET; 1751 sector_t lba; 1752 unsigned sector_size; 1753 1754 do { 1755 cmd[0] = READ_CAPACITY; 1756 memset(&cmd[1], 0, 9); 1757 memset(buffer, 0, 8); 1758 1759 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE, 1760 buffer, 8, &sshdr, 1761 SD_TIMEOUT, SD_MAX_RETRIES, NULL); 1762 1763 if (media_not_present(sdkp, &sshdr)) 1764 return -ENODEV; 1765 1766 if (the_result) { 1767 sense_valid = scsi_sense_valid(&sshdr); 1768 if (sense_valid && 1769 sshdr.sense_key == UNIT_ATTENTION && 1770 sshdr.asc == 0x29 && sshdr.ascq == 0x00) 1771 /* Device reset might occur several times, 1772 * give it one more chance */ 1773 if (--reset_retries > 0) 1774 continue; 1775 } 1776 retries--; 1777 1778 } while (the_result && retries); 1779 1780 if (the_result) { 1781 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n"); 1782 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result); 1783 return -EINVAL; 1784 } 1785 1786 sector_size = get_unaligned_be32(&buffer[4]); 1787 lba = get_unaligned_be32(&buffer[0]); 1788 1789 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) { 1790 /* Some buggy (usb cardreader) devices return an lba of 1791 0xffffffff when the want to report a size of 0 (with 1792 which they really mean no media is present) */ 1793 sdkp->capacity = 0; 1794 sdkp->physical_block_size = sector_size; 1795 return sector_size; 1796 } 1797 1798 if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) { 1799 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a " 1800 "kernel compiled with support for large block " 1801 "devices.\n"); 1802 sdkp->capacity = 0; 1803 return -EOVERFLOW; 1804 } 1805 1806 sdkp->capacity = lba + 1; 1807 sdkp->physical_block_size = sector_size; 1808 return sector_size; 1809 } 1810 1811 static int sd_try_rc16_first(struct scsi_device *sdp) 1812 { 1813 if (sdp->host->max_cmd_len < 16) 1814 return 0; 1815 if (sdp->scsi_level > SCSI_SPC_2) 1816 return 1; 1817 if (scsi_device_protection(sdp)) 1818 return 1; 1819 return 0; 1820 } 1821 1822 /* 1823 * read disk capacity 1824 */ 1825 static void 1826 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer) 1827 { 1828 int sector_size; 1829 struct scsi_device *sdp = sdkp->device; 1830 sector_t old_capacity = sdkp->capacity; 1831 1832 if (sd_try_rc16_first(sdp)) { 1833 sector_size = read_capacity_16(sdkp, sdp, buffer); 1834 if (sector_size == -EOVERFLOW) 1835 goto got_data; 1836 if (sector_size == -ENODEV) 1837 return; 1838 if (sector_size < 0) 1839 sector_size = read_capacity_10(sdkp, sdp, buffer); 1840 if (sector_size < 0) 1841 return; 1842 } else { 1843 sector_size = read_capacity_10(sdkp, sdp, buffer); 1844 if (sector_size == -EOVERFLOW) 1845 goto got_data; 1846 if (sector_size < 0) 1847 return; 1848 if ((sizeof(sdkp->capacity) > 4) && 1849 (sdkp->capacity > 0xffffffffULL)) { 1850 int old_sector_size = sector_size; 1851 sd_printk(KERN_NOTICE, sdkp, "Very big device. " 1852 "Trying to use READ CAPACITY(16).\n"); 1853 sector_size = read_capacity_16(sdkp, sdp, buffer); 1854 if (sector_size < 0) { 1855 sd_printk(KERN_NOTICE, sdkp, 1856 "Using 0xffffffff as device size\n"); 1857 sdkp->capacity = 1 + (sector_t) 0xffffffff; 1858 sector_size = old_sector_size; 1859 goto got_data; 1860 } 1861 } 1862 } 1863 1864 /* Some devices are known to return the total number of blocks, 1865 * not the highest block number. Some devices have versions 1866 * which do this and others which do not. Some devices we might 1867 * suspect of doing this but we don't know for certain. 1868 * 1869 * If we know the reported capacity is wrong, decrement it. If 1870 * we can only guess, then assume the number of blocks is even 1871 * (usually true but not always) and err on the side of lowering 1872 * the capacity. 1873 */ 1874 if (sdp->fix_capacity || 1875 (sdp->guess_capacity && (sdkp->capacity & 0x01))) { 1876 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count " 1877 "from its reported value: %llu\n", 1878 (unsigned long long) sdkp->capacity); 1879 --sdkp->capacity; 1880 } 1881 1882 got_data: 1883 if (sector_size == 0) { 1884 sector_size = 512; 1885 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, " 1886 "assuming 512.\n"); 1887 } 1888 1889 if (sector_size != 512 && 1890 sector_size != 1024 && 1891 sector_size != 2048 && 1892 sector_size != 4096 && 1893 sector_size != 256) { 1894 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n", 1895 sector_size); 1896 /* 1897 * The user might want to re-format the drive with 1898 * a supported sectorsize. Once this happens, it 1899 * would be relatively trivial to set the thing up. 1900 * For this reason, we leave the thing in the table. 1901 */ 1902 sdkp->capacity = 0; 1903 /* 1904 * set a bogus sector size so the normal read/write 1905 * logic in the block layer will eventually refuse any 1906 * request on this device without tripping over power 1907 * of two sector size assumptions 1908 */ 1909 sector_size = 512; 1910 } 1911 blk_queue_logical_block_size(sdp->request_queue, sector_size); 1912 1913 { 1914 char cap_str_2[10], cap_str_10[10]; 1915 u64 sz = (u64)sdkp->capacity << ilog2(sector_size); 1916 1917 string_get_size(sz, STRING_UNITS_2, cap_str_2, 1918 sizeof(cap_str_2)); 1919 string_get_size(sz, STRING_UNITS_10, cap_str_10, 1920 sizeof(cap_str_10)); 1921 1922 if (sdkp->first_scan || old_capacity != sdkp->capacity) { 1923 sd_printk(KERN_NOTICE, sdkp, 1924 "%llu %d-byte logical blocks: (%s/%s)\n", 1925 (unsigned long long)sdkp->capacity, 1926 sector_size, cap_str_10, cap_str_2); 1927 1928 if (sdkp->physical_block_size != sector_size) 1929 sd_printk(KERN_NOTICE, sdkp, 1930 "%u-byte physical blocks\n", 1931 sdkp->physical_block_size); 1932 } 1933 } 1934 1935 /* Rescale capacity to 512-byte units */ 1936 if (sector_size == 4096) 1937 sdkp->capacity <<= 3; 1938 else if (sector_size == 2048) 1939 sdkp->capacity <<= 2; 1940 else if (sector_size == 1024) 1941 sdkp->capacity <<= 1; 1942 else if (sector_size == 256) 1943 sdkp->capacity >>= 1; 1944 1945 blk_queue_physical_block_size(sdp->request_queue, 1946 sdkp->physical_block_size); 1947 sdkp->device->sector_size = sector_size; 1948 } 1949 1950 /* called with buffer of length 512 */ 1951 static inline int 1952 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage, 1953 unsigned char *buffer, int len, struct scsi_mode_data *data, 1954 struct scsi_sense_hdr *sshdr) 1955 { 1956 return scsi_mode_sense(sdp, dbd, modepage, buffer, len, 1957 SD_TIMEOUT, SD_MAX_RETRIES, data, 1958 sshdr); 1959 } 1960 1961 /* 1962 * read write protect setting, if possible - called only in sd_revalidate_disk() 1963 * called with buffer of length SD_BUF_SIZE 1964 */ 1965 static void 1966 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer) 1967 { 1968 int res; 1969 struct scsi_device *sdp = sdkp->device; 1970 struct scsi_mode_data data; 1971 int old_wp = sdkp->write_prot; 1972 1973 set_disk_ro(sdkp->disk, 0); 1974 if (sdp->skip_ms_page_3f) { 1975 sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n"); 1976 return; 1977 } 1978 1979 if (sdp->use_192_bytes_for_3f) { 1980 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL); 1981 } else { 1982 /* 1983 * First attempt: ask for all pages (0x3F), but only 4 bytes. 1984 * We have to start carefully: some devices hang if we ask 1985 * for more than is available. 1986 */ 1987 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL); 1988 1989 /* 1990 * Second attempt: ask for page 0 When only page 0 is 1991 * implemented, a request for page 3F may return Sense Key 1992 * 5: Illegal Request, Sense Code 24: Invalid field in 1993 * CDB. 1994 */ 1995 if (!scsi_status_is_good(res)) 1996 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL); 1997 1998 /* 1999 * Third attempt: ask 255 bytes, as we did earlier. 2000 */ 2001 if (!scsi_status_is_good(res)) 2002 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255, 2003 &data, NULL); 2004 } 2005 2006 if (!scsi_status_is_good(res)) { 2007 sd_printk(KERN_WARNING, sdkp, 2008 "Test WP failed, assume Write Enabled\n"); 2009 } else { 2010 sdkp->write_prot = ((data.device_specific & 0x80) != 0); 2011 set_disk_ro(sdkp->disk, sdkp->write_prot); 2012 if (sdkp->first_scan || old_wp != sdkp->write_prot) { 2013 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n", 2014 sdkp->write_prot ? "on" : "off"); 2015 sd_printk(KERN_DEBUG, sdkp, 2016 "Mode Sense: %02x %02x %02x %02x\n", 2017 buffer[0], buffer[1], buffer[2], buffer[3]); 2018 } 2019 } 2020 } 2021 2022 /* 2023 * sd_read_cache_type - called only from sd_revalidate_disk() 2024 * called with buffer of length SD_BUF_SIZE 2025 */ 2026 static void 2027 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) 2028 { 2029 int len = 0, res; 2030 struct scsi_device *sdp = sdkp->device; 2031 2032 int dbd; 2033 int modepage; 2034 int first_len; 2035 struct scsi_mode_data data; 2036 struct scsi_sense_hdr sshdr; 2037 int old_wce = sdkp->WCE; 2038 int old_rcd = sdkp->RCD; 2039 int old_dpofua = sdkp->DPOFUA; 2040 2041 first_len = 4; 2042 if (sdp->skip_ms_page_8) { 2043 if (sdp->type == TYPE_RBC) 2044 goto defaults; 2045 else { 2046 if (sdp->skip_ms_page_3f) 2047 goto defaults; 2048 modepage = 0x3F; 2049 if (sdp->use_192_bytes_for_3f) 2050 first_len = 192; 2051 dbd = 0; 2052 } 2053 } else if (sdp->type == TYPE_RBC) { 2054 modepage = 6; 2055 dbd = 8; 2056 } else { 2057 modepage = 8; 2058 dbd = 0; 2059 } 2060 2061 /* cautiously ask */ 2062 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len, 2063 &data, &sshdr); 2064 2065 if (!scsi_status_is_good(res)) 2066 goto bad_sense; 2067 2068 if (!data.header_length) { 2069 modepage = 6; 2070 first_len = 0; 2071 sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n"); 2072 } 2073 2074 /* that went OK, now ask for the proper length */ 2075 len = data.length; 2076 2077 /* 2078 * We're only interested in the first three bytes, actually. 2079 * But the data cache page is defined for the first 20. 2080 */ 2081 if (len < 3) 2082 goto bad_sense; 2083 else if (len > SD_BUF_SIZE) { 2084 sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter " 2085 "data from %d to %d bytes\n", len, SD_BUF_SIZE); 2086 len = SD_BUF_SIZE; 2087 } 2088 if (modepage == 0x3F && sdp->use_192_bytes_for_3f) 2089 len = 192; 2090 2091 /* Get the data */ 2092 if (len > first_len) 2093 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, 2094 &data, &sshdr); 2095 2096 if (scsi_status_is_good(res)) { 2097 int offset = data.header_length + data.block_descriptor_length; 2098 2099 while (offset < len) { 2100 u8 page_code = buffer[offset] & 0x3F; 2101 u8 spf = buffer[offset] & 0x40; 2102 2103 if (page_code == 8 || page_code == 6) { 2104 /* We're interested only in the first 3 bytes. 2105 */ 2106 if (len - offset <= 2) { 2107 sd_printk(KERN_ERR, sdkp, "Incomplete " 2108 "mode parameter data\n"); 2109 goto defaults; 2110 } else { 2111 modepage = page_code; 2112 goto Page_found; 2113 } 2114 } else { 2115 /* Go to the next page */ 2116 if (spf && len - offset > 3) 2117 offset += 4 + (buffer[offset+2] << 8) + 2118 buffer[offset+3]; 2119 else if (!spf && len - offset > 1) 2120 offset += 2 + buffer[offset+1]; 2121 else { 2122 sd_printk(KERN_ERR, sdkp, "Incomplete " 2123 "mode parameter data\n"); 2124 goto defaults; 2125 } 2126 } 2127 } 2128 2129 if (modepage == 0x3F) { 2130 sd_printk(KERN_ERR, sdkp, "No Caching mode page " 2131 "present\n"); 2132 goto defaults; 2133 } else if ((buffer[offset] & 0x3f) != modepage) { 2134 sd_printk(KERN_ERR, sdkp, "Got wrong page\n"); 2135 goto defaults; 2136 } 2137 Page_found: 2138 if (modepage == 8) { 2139 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); 2140 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); 2141 } else { 2142 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0); 2143 sdkp->RCD = 0; 2144 } 2145 2146 sdkp->DPOFUA = (data.device_specific & 0x10) != 0; 2147 if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) { 2148 sd_printk(KERN_NOTICE, sdkp, 2149 "Uses READ/WRITE(6), disabling FUA\n"); 2150 sdkp->DPOFUA = 0; 2151 } 2152 2153 if (sdkp->first_scan || old_wce != sdkp->WCE || 2154 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA) 2155 sd_printk(KERN_NOTICE, sdkp, 2156 "Write cache: %s, read cache: %s, %s\n", 2157 sdkp->WCE ? "enabled" : "disabled", 2158 sdkp->RCD ? "disabled" : "enabled", 2159 sdkp->DPOFUA ? "supports DPO and FUA" 2160 : "doesn't support DPO or FUA"); 2161 2162 return; 2163 } 2164 2165 bad_sense: 2166 if (scsi_sense_valid(&sshdr) && 2167 sshdr.sense_key == ILLEGAL_REQUEST && 2168 sshdr.asc == 0x24 && sshdr.ascq == 0x0) 2169 /* Invalid field in CDB */ 2170 sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n"); 2171 else 2172 sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n"); 2173 2174 defaults: 2175 sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n"); 2176 sdkp->WCE = 0; 2177 sdkp->RCD = 0; 2178 sdkp->DPOFUA = 0; 2179 } 2180 2181 /* 2182 * The ATO bit indicates whether the DIF application tag is available 2183 * for use by the operating system. 2184 */ 2185 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer) 2186 { 2187 int res, offset; 2188 struct scsi_device *sdp = sdkp->device; 2189 struct scsi_mode_data data; 2190 struct scsi_sense_hdr sshdr; 2191 2192 if (sdp->type != TYPE_DISK) 2193 return; 2194 2195 if (sdkp->protection_type == 0) 2196 return; 2197 2198 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT, 2199 SD_MAX_RETRIES, &data, &sshdr); 2200 2201 if (!scsi_status_is_good(res) || !data.header_length || 2202 data.length < 6) { 2203 sd_printk(KERN_WARNING, sdkp, 2204 "getting Control mode page failed, assume no ATO\n"); 2205 2206 if (scsi_sense_valid(&sshdr)) 2207 sd_print_sense_hdr(sdkp, &sshdr); 2208 2209 return; 2210 } 2211 2212 offset = data.header_length + data.block_descriptor_length; 2213 2214 if ((buffer[offset] & 0x3f) != 0x0a) { 2215 sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n"); 2216 return; 2217 } 2218 2219 if ((buffer[offset + 5] & 0x80) == 0) 2220 return; 2221 2222 sdkp->ATO = 1; 2223 2224 return; 2225 } 2226 2227 /** 2228 * sd_read_block_limits - Query disk device for preferred I/O sizes. 2229 * @disk: disk to query 2230 */ 2231 static void sd_read_block_limits(struct scsi_disk *sdkp) 2232 { 2233 unsigned int sector_sz = sdkp->device->sector_size; 2234 const int vpd_len = 64; 2235 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL); 2236 2237 if (!buffer || 2238 /* Block Limits VPD */ 2239 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len)) 2240 goto out; 2241 2242 blk_queue_io_min(sdkp->disk->queue, 2243 get_unaligned_be16(&buffer[6]) * sector_sz); 2244 blk_queue_io_opt(sdkp->disk->queue, 2245 get_unaligned_be32(&buffer[12]) * sector_sz); 2246 2247 if (buffer[3] == 0x3c) { 2248 unsigned int lba_count, desc_count; 2249 2250 sdkp->max_ws_blocks = 2251 (u32) min_not_zero(get_unaligned_be64(&buffer[36]), 2252 (u64)0xffffffff); 2253 2254 if (!sdkp->lbpme) 2255 goto out; 2256 2257 lba_count = get_unaligned_be32(&buffer[20]); 2258 desc_count = get_unaligned_be32(&buffer[24]); 2259 2260 if (lba_count && desc_count) 2261 sdkp->max_unmap_blocks = lba_count; 2262 2263 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]); 2264 2265 if (buffer[32] & 0x80) 2266 sdkp->unmap_alignment = 2267 get_unaligned_be32(&buffer[32]) & ~(1 << 31); 2268 2269 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */ 2270 2271 if (sdkp->max_unmap_blocks) 2272 sd_config_discard(sdkp, SD_LBP_UNMAP); 2273 else 2274 sd_config_discard(sdkp, SD_LBP_WS16); 2275 2276 } else { /* LBP VPD page tells us what to use */ 2277 2278 if (sdkp->lbpu && sdkp->max_unmap_blocks) 2279 sd_config_discard(sdkp, SD_LBP_UNMAP); 2280 else if (sdkp->lbpws) 2281 sd_config_discard(sdkp, SD_LBP_WS16); 2282 else if (sdkp->lbpws10) 2283 sd_config_discard(sdkp, SD_LBP_WS10); 2284 else 2285 sd_config_discard(sdkp, SD_LBP_DISABLE); 2286 } 2287 } 2288 2289 out: 2290 kfree(buffer); 2291 } 2292 2293 /** 2294 * sd_read_block_characteristics - Query block dev. characteristics 2295 * @disk: disk to query 2296 */ 2297 static void sd_read_block_characteristics(struct scsi_disk *sdkp) 2298 { 2299 unsigned char *buffer; 2300 u16 rot; 2301 const int vpd_len = 64; 2302 2303 buffer = kmalloc(vpd_len, GFP_KERNEL); 2304 2305 if (!buffer || 2306 /* Block Device Characteristics VPD */ 2307 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len)) 2308 goto out; 2309 2310 rot = get_unaligned_be16(&buffer[4]); 2311 2312 if (rot == 1) 2313 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue); 2314 2315 out: 2316 kfree(buffer); 2317 } 2318 2319 /** 2320 * sd_read_block_provisioning - Query provisioning VPD page 2321 * @disk: disk to query 2322 */ 2323 static void sd_read_block_provisioning(struct scsi_disk *sdkp) 2324 { 2325 unsigned char *buffer; 2326 const int vpd_len = 8; 2327 2328 if (sdkp->lbpme == 0) 2329 return; 2330 2331 buffer = kmalloc(vpd_len, GFP_KERNEL); 2332 2333 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len)) 2334 goto out; 2335 2336 sdkp->lbpvpd = 1; 2337 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */ 2338 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */ 2339 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */ 2340 2341 out: 2342 kfree(buffer); 2343 } 2344 2345 static int sd_try_extended_inquiry(struct scsi_device *sdp) 2346 { 2347 /* 2348 * Although VPD inquiries can go to SCSI-2 type devices, 2349 * some USB ones crash on receiving them, and the pages 2350 * we currently ask for are for SPC-3 and beyond 2351 */ 2352 if (sdp->scsi_level > SCSI_SPC_2) 2353 return 1; 2354 return 0; 2355 } 2356 2357 /** 2358 * sd_revalidate_disk - called the first time a new disk is seen, 2359 * performs disk spin up, read_capacity, etc. 2360 * @disk: struct gendisk we care about 2361 **/ 2362 static int sd_revalidate_disk(struct gendisk *disk) 2363 { 2364 struct scsi_disk *sdkp = scsi_disk(disk); 2365 struct scsi_device *sdp = sdkp->device; 2366 unsigned char *buffer; 2367 unsigned flush = 0; 2368 2369 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, 2370 "sd_revalidate_disk\n")); 2371 2372 /* 2373 * If the device is offline, don't try and read capacity or any 2374 * of the other niceties. 2375 */ 2376 if (!scsi_device_online(sdp)) 2377 goto out; 2378 2379 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL); 2380 if (!buffer) { 2381 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory " 2382 "allocation failure.\n"); 2383 goto out; 2384 } 2385 2386 sd_spinup_disk(sdkp); 2387 2388 /* 2389 * Without media there is no reason to ask; moreover, some devices 2390 * react badly if we do. 2391 */ 2392 if (sdkp->media_present) { 2393 sd_read_capacity(sdkp, buffer); 2394 2395 if (sd_try_extended_inquiry(sdp)) { 2396 sd_read_block_provisioning(sdkp); 2397 sd_read_block_limits(sdkp); 2398 sd_read_block_characteristics(sdkp); 2399 } 2400 2401 sd_read_write_protect_flag(sdkp, buffer); 2402 sd_read_cache_type(sdkp, buffer); 2403 sd_read_app_tag_own(sdkp, buffer); 2404 } 2405 2406 sdkp->first_scan = 0; 2407 2408 /* 2409 * We now have all cache related info, determine how we deal 2410 * with flush requests. 2411 */ 2412 if (sdkp->WCE) { 2413 flush |= REQ_FLUSH; 2414 if (sdkp->DPOFUA) 2415 flush |= REQ_FUA; 2416 } 2417 2418 blk_queue_flush(sdkp->disk->queue, flush); 2419 2420 set_capacity(disk, sdkp->capacity); 2421 kfree(buffer); 2422 2423 out: 2424 return 0; 2425 } 2426 2427 /** 2428 * sd_unlock_native_capacity - unlock native capacity 2429 * @disk: struct gendisk to set capacity for 2430 * 2431 * Block layer calls this function if it detects that partitions 2432 * on @disk reach beyond the end of the device. If the SCSI host 2433 * implements ->unlock_native_capacity() method, it's invoked to 2434 * give it a chance to adjust the device capacity. 2435 * 2436 * CONTEXT: 2437 * Defined by block layer. Might sleep. 2438 */ 2439 static void sd_unlock_native_capacity(struct gendisk *disk) 2440 { 2441 struct scsi_device *sdev = scsi_disk(disk)->device; 2442 2443 if (sdev->host->hostt->unlock_native_capacity) 2444 sdev->host->hostt->unlock_native_capacity(sdev); 2445 } 2446 2447 /** 2448 * sd_format_disk_name - format disk name 2449 * @prefix: name prefix - ie. "sd" for SCSI disks 2450 * @index: index of the disk to format name for 2451 * @buf: output buffer 2452 * @buflen: length of the output buffer 2453 * 2454 * SCSI disk names starts at sda. The 26th device is sdz and the 2455 * 27th is sdaa. The last one for two lettered suffix is sdzz 2456 * which is followed by sdaaa. 2457 * 2458 * This is basically 26 base counting with one extra 'nil' entry 2459 * at the beginning from the second digit on and can be 2460 * determined using similar method as 26 base conversion with the 2461 * index shifted -1 after each digit is computed. 2462 * 2463 * CONTEXT: 2464 * Don't care. 2465 * 2466 * RETURNS: 2467 * 0 on success, -errno on failure. 2468 */ 2469 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen) 2470 { 2471 const int base = 'z' - 'a' + 1; 2472 char *begin = buf + strlen(prefix); 2473 char *end = buf + buflen; 2474 char *p; 2475 int unit; 2476 2477 p = end - 1; 2478 *p = '\0'; 2479 unit = base; 2480 do { 2481 if (p == begin) 2482 return -EINVAL; 2483 *--p = 'a' + (index % unit); 2484 index = (index / unit) - 1; 2485 } while (index >= 0); 2486 2487 memmove(begin, p, end - p); 2488 memcpy(buf, prefix, strlen(prefix)); 2489 2490 return 0; 2491 } 2492 2493 /* 2494 * The asynchronous part of sd_probe 2495 */ 2496 static void sd_probe_async(void *data, async_cookie_t cookie) 2497 { 2498 struct scsi_disk *sdkp = data; 2499 struct scsi_device *sdp; 2500 struct gendisk *gd; 2501 u32 index; 2502 struct device *dev; 2503 2504 sdp = sdkp->device; 2505 gd = sdkp->disk; 2506 index = sdkp->index; 2507 dev = &sdp->sdev_gendev; 2508 2509 gd->major = sd_major((index & 0xf0) >> 4); 2510 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00); 2511 gd->minors = SD_MINORS; 2512 2513 gd->fops = &sd_fops; 2514 gd->private_data = &sdkp->driver; 2515 gd->queue = sdkp->device->request_queue; 2516 2517 /* defaults, until the device tells us otherwise */ 2518 sdp->sector_size = 512; 2519 sdkp->capacity = 0; 2520 sdkp->media_present = 1; 2521 sdkp->write_prot = 0; 2522 sdkp->WCE = 0; 2523 sdkp->RCD = 0; 2524 sdkp->ATO = 0; 2525 sdkp->first_scan = 1; 2526 2527 sd_revalidate_disk(gd); 2528 2529 blk_queue_prep_rq(sdp->request_queue, sd_prep_fn); 2530 blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn); 2531 2532 gd->driverfs_dev = &sdp->sdev_gendev; 2533 gd->flags = GENHD_FL_EXT_DEVT; 2534 if (sdp->removable) { 2535 gd->flags |= GENHD_FL_REMOVABLE; 2536 gd->events |= DISK_EVENT_MEDIA_CHANGE; 2537 } 2538 2539 add_disk(gd); 2540 sd_dif_config_host(sdkp); 2541 2542 sd_revalidate_disk(gd); 2543 2544 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", 2545 sdp->removable ? "removable " : ""); 2546 scsi_autopm_put_device(sdp); 2547 put_device(&sdkp->dev); 2548 } 2549 2550 /** 2551 * sd_probe - called during driver initialization and whenever a 2552 * new scsi device is attached to the system. It is called once 2553 * for each scsi device (not just disks) present. 2554 * @dev: pointer to device object 2555 * 2556 * Returns 0 if successful (or not interested in this scsi device 2557 * (e.g. scanner)); 1 when there is an error. 2558 * 2559 * Note: this function is invoked from the scsi mid-level. 2560 * This function sets up the mapping between a given 2561 * <host,channel,id,lun> (found in sdp) and new device name 2562 * (e.g. /dev/sda). More precisely it is the block device major 2563 * and minor number that is chosen here. 2564 * 2565 * Assume sd_attach is not re-entrant (for time being) 2566 * Also think about sd_attach() and sd_remove() running coincidentally. 2567 **/ 2568 static int sd_probe(struct device *dev) 2569 { 2570 struct scsi_device *sdp = to_scsi_device(dev); 2571 struct scsi_disk *sdkp; 2572 struct gendisk *gd; 2573 int index; 2574 int error; 2575 2576 error = -ENODEV; 2577 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC) 2578 goto out; 2579 2580 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp, 2581 "sd_attach\n")); 2582 2583 error = -ENOMEM; 2584 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL); 2585 if (!sdkp) 2586 goto out; 2587 2588 gd = alloc_disk(SD_MINORS); 2589 if (!gd) 2590 goto out_free; 2591 2592 do { 2593 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL)) 2594 goto out_put; 2595 2596 spin_lock(&sd_index_lock); 2597 error = ida_get_new(&sd_index_ida, &index); 2598 spin_unlock(&sd_index_lock); 2599 } while (error == -EAGAIN); 2600 2601 if (error) { 2602 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n"); 2603 goto out_put; 2604 } 2605 2606 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); 2607 if (error) { 2608 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n"); 2609 goto out_free_index; 2610 } 2611 2612 sdkp->device = sdp; 2613 sdkp->driver = &sd_template; 2614 sdkp->disk = gd; 2615 sdkp->index = index; 2616 atomic_set(&sdkp->openers, 0); 2617 2618 if (!sdp->request_queue->rq_timeout) { 2619 if (sdp->type != TYPE_MOD) 2620 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT); 2621 else 2622 blk_queue_rq_timeout(sdp->request_queue, 2623 SD_MOD_TIMEOUT); 2624 } 2625 2626 device_initialize(&sdkp->dev); 2627 sdkp->dev.parent = dev; 2628 sdkp->dev.class = &sd_disk_class; 2629 dev_set_name(&sdkp->dev, dev_name(dev)); 2630 2631 if (device_add(&sdkp->dev)) 2632 goto out_free_index; 2633 2634 get_device(dev); 2635 dev_set_drvdata(dev, sdkp); 2636 2637 get_device(&sdkp->dev); /* prevent release before async_schedule */ 2638 async_schedule(sd_probe_async, sdkp); 2639 2640 return 0; 2641 2642 out_free_index: 2643 spin_lock(&sd_index_lock); 2644 ida_remove(&sd_index_ida, index); 2645 spin_unlock(&sd_index_lock); 2646 out_put: 2647 put_disk(gd); 2648 out_free: 2649 kfree(sdkp); 2650 out: 2651 return error; 2652 } 2653 2654 /** 2655 * sd_remove - called whenever a scsi disk (previously recognized by 2656 * sd_probe) is detached from the system. It is called (potentially 2657 * multiple times) during sd module unload. 2658 * @sdp: pointer to mid level scsi device object 2659 * 2660 * Note: this function is invoked from the scsi mid-level. 2661 * This function potentially frees up a device name (e.g. /dev/sdc) 2662 * that could be re-used by a subsequent sd_probe(). 2663 * This function is not called when the built-in sd driver is "exit-ed". 2664 **/ 2665 static int sd_remove(struct device *dev) 2666 { 2667 struct scsi_disk *sdkp; 2668 2669 sdkp = dev_get_drvdata(dev); 2670 scsi_autopm_get_device(sdkp->device); 2671 2672 async_synchronize_full(); 2673 blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn); 2674 blk_queue_unprep_rq(sdkp->device->request_queue, NULL); 2675 device_del(&sdkp->dev); 2676 del_gendisk(sdkp->disk); 2677 sd_shutdown(dev); 2678 2679 mutex_lock(&sd_ref_mutex); 2680 dev_set_drvdata(dev, NULL); 2681 put_device(&sdkp->dev); 2682 mutex_unlock(&sd_ref_mutex); 2683 2684 return 0; 2685 } 2686 2687 /** 2688 * scsi_disk_release - Called to free the scsi_disk structure 2689 * @dev: pointer to embedded class device 2690 * 2691 * sd_ref_mutex must be held entering this routine. Because it is 2692 * called on last put, you should always use the scsi_disk_get() 2693 * scsi_disk_put() helpers which manipulate the semaphore directly 2694 * and never do a direct put_device. 2695 **/ 2696 static void scsi_disk_release(struct device *dev) 2697 { 2698 struct scsi_disk *sdkp = to_scsi_disk(dev); 2699 struct gendisk *disk = sdkp->disk; 2700 2701 spin_lock(&sd_index_lock); 2702 ida_remove(&sd_index_ida, sdkp->index); 2703 spin_unlock(&sd_index_lock); 2704 2705 disk->private_data = NULL; 2706 put_disk(disk); 2707 put_device(&sdkp->device->sdev_gendev); 2708 2709 kfree(sdkp); 2710 } 2711 2712 static int sd_start_stop_device(struct scsi_disk *sdkp, int start) 2713 { 2714 unsigned char cmd[6] = { START_STOP }; /* START_VALID */ 2715 struct scsi_sense_hdr sshdr; 2716 struct scsi_device *sdp = sdkp->device; 2717 int res; 2718 2719 if (start) 2720 cmd[4] |= 1; /* START */ 2721 2722 if (sdp->start_stop_pwr_cond) 2723 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */ 2724 2725 if (!scsi_device_online(sdp)) 2726 return -ENODEV; 2727 2728 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, 2729 SD_TIMEOUT, SD_MAX_RETRIES, NULL); 2730 if (res) { 2731 sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n"); 2732 sd_print_result(sdkp, res); 2733 if (driver_byte(res) & DRIVER_SENSE) 2734 sd_print_sense_hdr(sdkp, &sshdr); 2735 } 2736 2737 return res; 2738 } 2739 2740 /* 2741 * Send a SYNCHRONIZE CACHE instruction down to the device through 2742 * the normal SCSI command structure. Wait for the command to 2743 * complete. 2744 */ 2745 static void sd_shutdown(struct device *dev) 2746 { 2747 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); 2748 2749 if (!sdkp) 2750 return; /* this can happen */ 2751 2752 if (pm_runtime_suspended(dev)) 2753 goto exit; 2754 2755 if (sdkp->WCE) { 2756 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); 2757 sd_sync_cache(sdkp); 2758 } 2759 2760 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) { 2761 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); 2762 sd_start_stop_device(sdkp, 0); 2763 } 2764 2765 exit: 2766 scsi_disk_put(sdkp); 2767 } 2768 2769 static int sd_suspend(struct device *dev, pm_message_t mesg) 2770 { 2771 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); 2772 int ret = 0; 2773 2774 if (!sdkp) 2775 return 0; /* this can happen */ 2776 2777 if (sdkp->WCE) { 2778 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); 2779 ret = sd_sync_cache(sdkp); 2780 if (ret) 2781 goto done; 2782 } 2783 2784 if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) { 2785 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); 2786 ret = sd_start_stop_device(sdkp, 0); 2787 } 2788 2789 done: 2790 scsi_disk_put(sdkp); 2791 return ret; 2792 } 2793 2794 static int sd_resume(struct device *dev) 2795 { 2796 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); 2797 int ret = 0; 2798 2799 if (!sdkp->device->manage_start_stop) 2800 goto done; 2801 2802 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n"); 2803 ret = sd_start_stop_device(sdkp, 1); 2804 2805 done: 2806 scsi_disk_put(sdkp); 2807 return ret; 2808 } 2809 2810 /** 2811 * init_sd - entry point for this driver (both when built in or when 2812 * a module). 2813 * 2814 * Note: this function registers this driver with the scsi mid-level. 2815 **/ 2816 static int __init init_sd(void) 2817 { 2818 int majors = 0, i, err; 2819 2820 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n")); 2821 2822 for (i = 0; i < SD_MAJORS; i++) 2823 if (register_blkdev(sd_major(i), "sd") == 0) 2824 majors++; 2825 2826 if (!majors) 2827 return -ENODEV; 2828 2829 err = class_register(&sd_disk_class); 2830 if (err) 2831 goto err_out; 2832 2833 err = scsi_register_driver(&sd_template.gendrv); 2834 if (err) 2835 goto err_out_class; 2836 2837 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE, 2838 0, 0, NULL); 2839 if (!sd_cdb_cache) { 2840 printk(KERN_ERR "sd: can't init extended cdb cache\n"); 2841 goto err_out_class; 2842 } 2843 2844 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache); 2845 if (!sd_cdb_pool) { 2846 printk(KERN_ERR "sd: can't init extended cdb pool\n"); 2847 goto err_out_cache; 2848 } 2849 2850 return 0; 2851 2852 err_out_cache: 2853 kmem_cache_destroy(sd_cdb_cache); 2854 2855 err_out_class: 2856 class_unregister(&sd_disk_class); 2857 err_out: 2858 for (i = 0; i < SD_MAJORS; i++) 2859 unregister_blkdev(sd_major(i), "sd"); 2860 return err; 2861 } 2862 2863 /** 2864 * exit_sd - exit point for this driver (when it is a module). 2865 * 2866 * Note: this function unregisters this driver from the scsi mid-level. 2867 **/ 2868 static void __exit exit_sd(void) 2869 { 2870 int i; 2871 2872 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); 2873 2874 mempool_destroy(sd_cdb_pool); 2875 kmem_cache_destroy(sd_cdb_cache); 2876 2877 scsi_unregister_driver(&sd_template.gendrv); 2878 class_unregister(&sd_disk_class); 2879 2880 for (i = 0; i < SD_MAJORS; i++) 2881 unregister_blkdev(sd_major(i), "sd"); 2882 } 2883 2884 module_init(init_sd); 2885 module_exit(exit_sd); 2886 2887 static void sd_print_sense_hdr(struct scsi_disk *sdkp, 2888 struct scsi_sense_hdr *sshdr) 2889 { 2890 sd_printk(KERN_INFO, sdkp, " "); 2891 scsi_show_sense_hdr(sshdr); 2892 sd_printk(KERN_INFO, sdkp, " "); 2893 scsi_show_extd_sense(sshdr->asc, sshdr->ascq); 2894 } 2895 2896 static void sd_print_result(struct scsi_disk *sdkp, int result) 2897 { 2898 sd_printk(KERN_INFO, sdkp, " "); 2899 scsi_show_result(result); 2900 } 2901 2902