1 /* 2 * QLogic Fibre Channel HBA Driver 3 * Copyright (c) 2003-2014 QLogic Corporation 4 * 5 * See LICENSE.qla2xxx for copyright and licensing details. 6 */ 7 #ifndef __QLA_MR_H 8 #define __QLA_MR_H 9 10 #include "qla_dsd.h" 11 12 /* 13 * The PCI VendorID and DeviceID for our board. 14 */ 15 #define PCI_DEVICE_ID_QLOGIC_ISPF001 0xF001 16 17 /* FX00 specific definitions */ 18 19 #define FX00_COMMAND_TYPE_7 0x07 /* Command Type 7 entry for 7XXX */ 20 struct cmd_type_7_fx00 { 21 uint8_t entry_type; /* Entry type. */ 22 uint8_t entry_count; /* Entry count. */ 23 uint8_t sys_define; /* System defined. */ 24 uint8_t entry_status; /* Entry Status. */ 25 26 uint32_t handle; /* System handle. */ 27 uint8_t reserved_0; 28 uint8_t port_path_ctrl; 29 uint16_t reserved_1; 30 31 __le16 tgt_idx; /* Target Idx. */ 32 uint16_t timeout; /* Command timeout. */ 33 34 __le16 dseg_count; /* Data segment count. */ 35 uint8_t scsi_rsp_dsd_len; 36 uint8_t reserved_2; 37 38 struct scsi_lun lun; /* LUN (LE). */ 39 40 uint8_t cntrl_flags; 41 42 uint8_t task_mgmt_flags; /* Task management flags. */ 43 44 uint8_t task; 45 46 uint8_t crn; 47 48 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ 49 __le32 byte_count; /* Total byte count. */ 50 51 struct dsd64 dsd; 52 }; 53 54 #define STATUS_TYPE_FX00 0x01 /* Status entry. */ 55 struct sts_entry_fx00 { 56 uint8_t entry_type; /* Entry type. */ 57 uint8_t entry_count; /* Entry count. */ 58 uint8_t sys_define; /* System defined. */ 59 uint8_t entry_status; /* Entry Status. */ 60 61 uint32_t handle; /* System handle. */ 62 uint32_t reserved_3; /* System handle. */ 63 64 __le16 comp_status; /* Completion status. */ 65 uint16_t reserved_0; /* OX_ID used by the firmware. */ 66 67 __le32 residual_len; /* FW calc residual transfer length. */ 68 69 uint16_t reserved_1; 70 uint16_t state_flags; /* State flags. */ 71 72 uint16_t reserved_2; 73 __le16 scsi_status; /* SCSI status. */ 74 75 uint32_t sense_len; /* FCP SENSE length. */ 76 uint8_t data[32]; /* FCP response/sense information. */ 77 }; 78 79 80 #define MAX_HANDLE_COUNT 15 81 #define MULTI_STATUS_TYPE_FX00 0x0D 82 83 struct multi_sts_entry_fx00 { 84 uint8_t entry_type; /* Entry type. */ 85 uint8_t entry_count; /* Entry count. */ 86 uint8_t handle_count; 87 uint8_t entry_status; 88 89 __le32 handles[MAX_HANDLE_COUNT]; 90 }; 91 92 #define TSK_MGMT_IOCB_TYPE_FX00 0x05 93 struct tsk_mgmt_entry_fx00 { 94 uint8_t entry_type; /* Entry type. */ 95 uint8_t entry_count; /* Entry count. */ 96 uint8_t sys_define; 97 uint8_t entry_status; /* Entry Status. */ 98 99 uint32_t handle; /* System handle. */ 100 101 uint32_t reserved_0; 102 103 __le16 tgt_id; /* Target Idx. */ 104 105 uint16_t reserved_1; 106 uint16_t reserved_3; 107 uint16_t reserved_4; 108 109 struct scsi_lun lun; /* LUN (LE). */ 110 111 __le32 control_flags; /* Control Flags. */ 112 113 uint8_t reserved_2[32]; 114 }; 115 116 117 #define ABORT_IOCB_TYPE_FX00 0x08 /* Abort IOCB status. */ 118 struct abort_iocb_entry_fx00 { 119 uint8_t entry_type; /* Entry type. */ 120 uint8_t entry_count; /* Entry count. */ 121 uint8_t sys_define; /* System defined. */ 122 uint8_t entry_status; /* Entry Status. */ 123 124 uint32_t handle; /* System handle. */ 125 __le32 reserved_0; 126 127 __le16 tgt_id_sts; /* Completion status. */ 128 __le16 options; 129 130 uint32_t abort_handle; /* System handle. */ 131 __le32 reserved_2; 132 133 __le16 req_que_no; 134 uint8_t reserved_1[38]; 135 }; 136 137 #define IOCTL_IOSB_TYPE_FX00 0x0C 138 struct ioctl_iocb_entry_fx00 { 139 uint8_t entry_type; /* Entry type. */ 140 uint8_t entry_count; /* Entry count. */ 141 uint8_t sys_define; /* System defined. */ 142 uint8_t entry_status; /* Entry Status. */ 143 144 uint32_t handle; /* System handle. */ 145 uint32_t reserved_0; /* System handle. */ 146 147 uint16_t comp_func_num; 148 __le16 fw_iotcl_flags; 149 150 __le32 dataword_r; /* Data word returned */ 151 uint32_t adapid; /* Adapter ID */ 152 uint32_t dataword_r_extra; 153 154 __le32 seq_no; 155 uint8_t reserved_2[20]; 156 uint32_t residuallen; 157 __le32 status; 158 }; 159 160 #define STATUS_CONT_TYPE_FX00 0x04 161 162 #define FX00_IOCB_TYPE 0x0B 163 struct fxdisc_entry_fx00 { 164 uint8_t entry_type; /* Entry type. */ 165 uint8_t entry_count; /* Entry count. */ 166 uint8_t sys_define; /* System Defined. */ 167 uint8_t entry_status; /* Entry Status. */ 168 169 uint32_t handle; /* System handle. */ 170 __le32 reserved_0; /* System handle. */ 171 172 __le16 func_num; 173 __le16 req_xfrcnt; 174 __le16 req_dsdcnt; 175 __le16 rsp_xfrcnt; 176 __le16 rsp_dsdcnt; 177 uint8_t flags; 178 uint8_t reserved_1; 179 180 struct dsd64 dseg_rq; 181 struct dsd64 dseg_rsp; 182 183 __le32 dataword; 184 __le32 adapid; 185 __le32 adapid_hi; 186 __le32 dataword_extra; 187 }; 188 189 struct qlafx00_tgt_node_info { 190 uint8_t tgt_node_wwpn[WWN_SIZE]; 191 uint8_t tgt_node_wwnn[WWN_SIZE]; 192 uint32_t tgt_node_state; 193 uint8_t reserved[128]; 194 uint32_t reserved_1[8]; 195 uint64_t reserved_2[4]; 196 } __packed; 197 198 #define QLAFX00_TGT_NODE_INFO sizeof(struct qlafx00_tgt_node_info) 199 200 #define QLAFX00_LINK_STATUS_DOWN 0x10 201 #define QLAFX00_LINK_STATUS_UP 0x11 202 203 #define QLAFX00_PORT_SPEED_2G 0x2 204 #define QLAFX00_PORT_SPEED_4G 0x4 205 #define QLAFX00_PORT_SPEED_8G 0x8 206 #define QLAFX00_PORT_SPEED_10G 0xa 207 struct port_info_data { 208 uint8_t port_state; 209 uint8_t port_type; 210 uint16_t port_identifier; 211 uint32_t up_port_state; 212 uint8_t fw_ver_num[32]; 213 uint8_t portal_attrib; 214 uint16_t host_option; 215 uint8_t reset_delay; 216 uint8_t pdwn_retry_cnt; 217 uint16_t max_luns2tgt; 218 uint8_t risc_ver; 219 uint8_t pconn_option; 220 uint16_t risc_option; 221 uint16_t max_frame_len; 222 uint16_t max_iocb_alloc; 223 uint16_t exec_throttle; 224 uint8_t retry_cnt; 225 uint8_t retry_delay; 226 uint8_t port_name[8]; 227 uint8_t port_id[3]; 228 uint8_t link_status; 229 uint8_t plink_rate; 230 uint32_t link_config; 231 uint16_t adap_haddr; 232 uint8_t tgt_disc; 233 uint8_t log_tout; 234 uint8_t node_name[8]; 235 uint16_t erisc_opt1; 236 uint8_t resp_acc_tmr; 237 uint8_t intr_del_tmr; 238 uint8_t erisc_opt2; 239 uint8_t alt_port_name[8]; 240 uint8_t alt_node_name[8]; 241 uint8_t link_down_tout; 242 uint8_t conn_type; 243 uint8_t fc_fw_mode; 244 uint32_t uiReserved[48]; 245 } __packed; 246 247 /* OS Type Designations */ 248 #define OS_TYPE_UNKNOWN 0 249 #define OS_TYPE_LINUX 2 250 251 /* Linux Info */ 252 #define SYSNAME_LENGTH 128 253 #define NODENAME_LENGTH 64 254 #define RELEASE_LENGTH 64 255 #define VERSION_LENGTH 64 256 #define MACHINE_LENGTH 64 257 #define DOMNAME_LENGTH 64 258 259 struct host_system_info { 260 uint32_t os_type; 261 char sysname[SYSNAME_LENGTH]; 262 char nodename[NODENAME_LENGTH]; 263 char release[RELEASE_LENGTH]; 264 char version[VERSION_LENGTH]; 265 char machine[MACHINE_LENGTH]; 266 char domainname[DOMNAME_LENGTH]; 267 char hostdriver[VERSION_LENGTH]; 268 uint32_t reserved[64]; 269 } __packed; 270 271 struct register_host_info { 272 struct host_system_info hsi; /* host system info */ 273 uint64_t utc; /* UTC (system time) */ 274 uint32_t reserved[64]; /* future additions */ 275 } __packed; 276 277 278 #define QLAFX00_PORT_DATA_INFO (sizeof(struct port_info_data)) 279 #define QLAFX00_TGT_NODE_LIST_SIZE (sizeof(uint32_t) * 32) 280 281 struct config_info_data { 282 uint8_t model_num[16]; 283 uint8_t model_description[80]; 284 uint8_t reserved0[160]; 285 uint8_t symbolic_name[64]; 286 uint8_t serial_num[32]; 287 uint8_t hw_version[16]; 288 uint8_t fw_version[16]; 289 uint8_t uboot_version[16]; 290 uint8_t fru_serial_num[32]; 291 292 uint8_t fc_port_count; 293 uint8_t iscsi_port_count; 294 uint8_t reserved1[2]; 295 296 uint8_t mode; 297 uint8_t log_level; 298 uint8_t reserved2[2]; 299 300 uint32_t log_size; 301 302 uint8_t tgt_pres_mode; 303 uint8_t iqn_flags; 304 uint8_t lun_mapping; 305 306 uint64_t adapter_id; 307 308 uint32_t cluster_key_len; 309 uint8_t cluster_key[16]; 310 311 uint64_t cluster_master_id; 312 uint64_t cluster_slave_id; 313 uint8_t cluster_flags; 314 uint32_t enabled_capabilities; 315 uint32_t nominal_temp_value; 316 } __packed; 317 318 #define FXDISC_GET_CONFIG_INFO 0x01 319 #define FXDISC_GET_PORT_INFO 0x02 320 #define FXDISC_GET_TGT_NODE_INFO 0x80 321 #define FXDISC_GET_TGT_NODE_LIST 0x81 322 #define FXDISC_REG_HOST_INFO 0x99 323 #define FXDISC_ABORT_IOCTL 0xff 324 325 #define QLAFX00_HBA_ICNTRL_REG 0x20B08 326 #define QLAFX00_ICR_ENB_MASK 0x80000000 327 #define QLAFX00_ICR_DIS_MASK 0x7fffffff 328 #define QLAFX00_HST_RST_REG 0x18264 329 #define QLAFX00_SOC_TEMP_REG 0x184C4 330 #define QLAFX00_HST_TO_HBA_REG 0x20A04 331 #define QLAFX00_HBA_TO_HOST_REG 0x21B70 332 #define QLAFX00_HST_INT_STS_BITS 0x7 333 #define QLAFX00_BAR1_BASE_ADDR_REG 0x40018 334 #define QLAFX00_PEX0_WIN0_BASE_ADDR_REG 0x41824 335 336 #define QLAFX00_INTR_MB_CMPLT 0x1 337 #define QLAFX00_INTR_RSP_CMPLT 0x2 338 #define QLAFX00_INTR_ASYNC_CMPLT 0x4 339 340 #define QLAFX00_MBA_SYSTEM_ERR 0x8002 341 #define QLAFX00_MBA_TEMP_OVER 0x8005 342 #define QLAFX00_MBA_TEMP_NORM 0x8006 343 #define QLAFX00_MBA_TEMP_CRIT 0x8007 344 #define QLAFX00_MBA_LINK_UP 0x8011 345 #define QLAFX00_MBA_LINK_DOWN 0x8012 346 #define QLAFX00_MBA_PORT_UPDATE 0x8014 347 #define QLAFX00_MBA_SHUTDOWN_RQSTD 0x8062 348 349 #define SOC_SW_RST_CONTROL_REG_CORE0 0x0020800 350 #define SOC_FABRIC_RST_CONTROL_REG 0x0020840 351 #define SOC_FABRIC_CONTROL_REG 0x0020200 352 #define SOC_FABRIC_CONFIG_REG 0x0020204 353 #define SOC_PWR_MANAGEMENT_PWR_DOWN_REG 0x001820C 354 355 #define SOC_INTERRUPT_SOURCE_I_CONTROL_REG 0x0020B00 356 #define SOC_CORE_TIMER_REG 0x0021850 357 #define SOC_IRQ_ACK_REG 0x00218b4 358 359 #define CONTINUE_A64_TYPE_FX00 0x03 /* Continuation entry. */ 360 361 #define QLAFX00_SET_HST_INTR(ha, value) \ 362 wrt_reg_dword((ha)->cregbase + QLAFX00_HST_TO_HBA_REG, \ 363 value) 364 365 #define QLAFX00_CLR_HST_INTR(ha, value) \ 366 wrt_reg_dword((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \ 367 ~value) 368 369 #define QLAFX00_RD_INTR_REG(ha) \ 370 rd_reg_dword((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG) 371 372 #define QLAFX00_CLR_INTR_REG(ha, value) \ 373 wrt_reg_dword((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \ 374 ~value) 375 376 #define QLAFX00_SET_HBA_SOC_REG(ha, off, val)\ 377 wrt_reg_dword((ha)->cregbase + off, val) 378 379 #define QLAFX00_GET_HBA_SOC_REG(ha, off)\ 380 rd_reg_dword((ha)->cregbase + off) 381 382 #define QLAFX00_HBA_RST_REG(ha, val)\ 383 wrt_reg_dword((ha)->cregbase + QLAFX00_HST_RST_REG, val) 384 385 #define QLAFX00_RD_ICNTRL_REG(ha) \ 386 rd_reg_dword((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG) 387 388 #define QLAFX00_ENABLE_ICNTRL_REG(ha) \ 389 wrt_reg_dword((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \ 390 (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) | \ 391 QLAFX00_ICR_ENB_MASK)) 392 393 #define QLAFX00_DISABLE_ICNTRL_REG(ha) \ 394 wrt_reg_dword((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \ 395 (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) & \ 396 QLAFX00_ICR_DIS_MASK)) 397 398 #define QLAFX00_RD_REG(ha, off) \ 399 rd_reg_dword((ha)->cregbase + off) 400 401 #define QLAFX00_WR_REG(ha, off, val) \ 402 wrt_reg_dword((ha)->cregbase + off, val) 403 404 struct qla_mt_iocb_rqst_fx00 { 405 __le32 reserved_0; 406 407 __le16 func_type; 408 uint8_t flags; 409 uint8_t reserved_1; 410 411 __le32 dataword; 412 413 __le32 adapid; 414 __le32 adapid_hi; 415 416 __le32 dataword_extra; 417 418 __le16 req_len; 419 __le16 reserved_2; 420 421 __le16 rsp_len; 422 __le16 reserved_3; 423 }; 424 425 struct qla_mt_iocb_rsp_fx00 { 426 uint32_t reserved_1; 427 428 uint16_t func_type; 429 __le16 ioctl_flags; 430 431 __le32 ioctl_data; 432 433 uint32_t adapid; 434 uint32_t adapid_hi; 435 436 uint32_t reserved_2; 437 __le32 seq_number; 438 439 uint8_t reserved_3[20]; 440 441 int32_t res_count; 442 443 __le32 status; 444 }; 445 446 447 #define MAILBOX_REGISTER_COUNT_FX00 16 448 #define AEN_MAILBOX_REGISTER_COUNT_FX00 8 449 #define MAX_FIBRE_DEVICES_FX00 512 450 #define MAX_LUNS_FX00 0x1024 451 #define MAX_TARGETS_FX00 MAX_ISA_DEVICES 452 #define REQUEST_ENTRY_CNT_FX00 512 /* Number of request entries. */ 453 #define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/ 454 455 /* 456 * Firmware state codes for QLAFX00 adapters 457 */ 458 #define FSTATE_FX00_CONFIG_WAIT 0x0000 /* Waiting for driver to issue 459 * Initialize FW Mbox cmd 460 */ 461 #define FSTATE_FX00_INITIALIZED 0x1000 /* FW has been initialized by 462 * the driver 463 */ 464 465 #define FX00_DEF_RATOV 10 466 467 struct mr_data_fx00 { 468 uint8_t symbolic_name[64]; 469 uint8_t serial_num[32]; 470 uint8_t hw_version[16]; 471 uint8_t fw_version[16]; 472 uint8_t uboot_version[16]; 473 uint8_t fru_serial_num[32]; 474 fc_port_t fcport; /* fcport used for requests 475 * that are not linked 476 * to a particular target 477 */ 478 uint8_t fw_hbt_en; 479 uint8_t fw_hbt_cnt; 480 uint8_t fw_hbt_miss_cnt; 481 uint32_t old_fw_hbt_cnt; 482 uint16_t fw_reset_timer_tick; 483 uint8_t fw_reset_timer_exp; 484 uint16_t fw_critemp_timer_tick; 485 uint32_t old_aenmbx0_state; 486 uint32_t critical_temperature; 487 bool extended_io_enabled; 488 bool host_info_resend; 489 uint8_t hinfo_resend_timer_tick; 490 }; 491 492 #define QLAFX00_EXTENDED_IO_EN_MASK 0x20 493 494 /* 495 * SoC Junction Temperature is stored in 496 * bits 9:1 of SoC Junction Temperature Register 497 * in a firmware specific format format. 498 * To get the temperature in Celsius degrees 499 * the value from this bitfiled should be converted 500 * using this formula: 501 * Temperature (degrees C) = ((3,153,000 - (10,000 * X)) / 13,825) 502 * where X is the bit field value 503 * this macro reads the register, extracts the bitfield value, 504 * performs the calcualtions and returns temperature in Celsius 505 */ 506 #define QLAFX00_GET_TEMPERATURE(ha) ((3153000 - (10000 * \ 507 ((QLAFX00_RD_REG(ha, QLAFX00_SOC_TEMP_REG) & 0x3FE) >> 1))) / 13825) 508 509 510 #define QLAFX00_LOOP_DOWN_TIME 615 /* 600 */ 511 #define QLAFX00_HEARTBEAT_INTERVAL 6 /* number of seconds */ 512 #define QLAFX00_HEARTBEAT_MISS_CNT 3 /* number of miss */ 513 #define QLAFX00_RESET_INTERVAL 120 /* number of seconds */ 514 #define QLAFX00_MAX_RESET_INTERVAL 600 /* number of seconds */ 515 #define QLAFX00_CRITEMP_INTERVAL 60 /* number of seconds */ 516 #define QLAFX00_HINFO_RESEND_INTERVAL 60 /* number of seconds */ 517 518 #define QLAFX00_CRITEMP_THRSHLD 80 /* Celsius degrees */ 519 520 /* Max conncurrent IOs that can be queued */ 521 #define QLAFX00_MAX_CANQUEUE 1024 522 523 /* IOCTL IOCB abort success */ 524 #define QLAFX00_IOCTL_ICOB_ABORT_SUCCESS 0x68 525 526 #endif 527