1 /* 2 * Management Module Support for MPT (Message Passing Technology) based 3 * controllers 4 * 5 * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h 6 * Copyright (C) 2012-2014 LSI Corporation 7 * Copyright (C) 2013-2014 Avago Technologies 8 * (mailto: MPT-FusionLinux.pdl@avagotech.com) 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License 12 * as published by the Free Software Foundation; either version 2 13 * of the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * NO WARRANTY 21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR 22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT 23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, 24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is 25 * solely responsible for determining the appropriateness of using and 26 * distributing the Program and assumes all risks associated with its 27 * exercise of rights under this Agreement, including but not limited to 28 * the risks and costs of program errors, damage to or loss of data, 29 * programs or equipment, and unavailability or interruption of operations. 30 31 * DISCLAIMER OF LIABILITY 32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY 33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND 35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED 38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 39 40 * You should have received a copy of the GNU General Public License 41 * along with this program; if not, write to the Free Software 42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, 43 * USA. 44 */ 45 46 #ifndef MPT3SAS_CTL_H_INCLUDED 47 #define MPT3SAS_CTL_H_INCLUDED 48 49 #ifdef __KERNEL__ 50 #include <linux/miscdevice.h> 51 #endif 52 53 #ifndef MPT2SAS_MINOR 54 #define MPT2SAS_MINOR (MPT_MINOR + 1) 55 #endif 56 #ifndef MPT3SAS_MINOR 57 #define MPT3SAS_MINOR (MPT_MINOR + 2) 58 #endif 59 #define MPT2SAS_DEV_NAME "mpt2ctl" 60 #define MPT3SAS_DEV_NAME "mpt3ctl" 61 #define MPT3_MAGIC_NUMBER 'L' 62 #define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */ 63 64 /** 65 * IOCTL opcodes 66 */ 67 #define MPT3IOCINFO _IOWR(MPT3_MAGIC_NUMBER, 17, \ 68 struct mpt3_ioctl_iocinfo) 69 #define MPT3COMMAND _IOWR(MPT3_MAGIC_NUMBER, 20, \ 70 struct mpt3_ioctl_command) 71 #ifdef CONFIG_COMPAT 72 #define MPT3COMMAND32 _IOWR(MPT3_MAGIC_NUMBER, 20, \ 73 struct mpt3_ioctl_command32) 74 #endif 75 #define MPT3EVENTQUERY _IOWR(MPT3_MAGIC_NUMBER, 21, \ 76 struct mpt3_ioctl_eventquery) 77 #define MPT3EVENTENABLE _IOWR(MPT3_MAGIC_NUMBER, 22, \ 78 struct mpt3_ioctl_eventenable) 79 #define MPT3EVENTREPORT _IOWR(MPT3_MAGIC_NUMBER, 23, \ 80 struct mpt3_ioctl_eventreport) 81 #define MPT3HARDRESET _IOWR(MPT3_MAGIC_NUMBER, 24, \ 82 struct mpt3_ioctl_diag_reset) 83 #define MPT3BTDHMAPPING _IOWR(MPT3_MAGIC_NUMBER, 31, \ 84 struct mpt3_ioctl_btdh_mapping) 85 86 /* diag buffer support */ 87 #define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \ 88 struct mpt3_diag_register) 89 #define MPT3DIAGRELEASE _IOWR(MPT3_MAGIC_NUMBER, 27, \ 90 struct mpt3_diag_release) 91 #define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \ 92 struct mpt3_diag_unregister) 93 #define MPT3DIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 29, \ 94 struct mpt3_diag_query) 95 #define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \ 96 struct mpt3_diag_read_buffer) 97 98 /** 99 * struct mpt3_ioctl_header - main header structure 100 * @ioc_number - IOC unit number 101 * @port_number - IOC port number 102 * @max_data_size - maximum number bytes to transfer on read 103 */ 104 struct mpt3_ioctl_header { 105 uint32_t ioc_number; 106 uint32_t port_number; 107 uint32_t max_data_size; 108 }; 109 110 /** 111 * struct mpt3_ioctl_diag_reset - diagnostic reset 112 * @hdr - generic header 113 */ 114 struct mpt3_ioctl_diag_reset { 115 struct mpt3_ioctl_header hdr; 116 }; 117 118 119 /** 120 * struct mpt3_ioctl_pci_info - pci device info 121 * @device - pci device id 122 * @function - pci function id 123 * @bus - pci bus id 124 * @segment_id - pci segment id 125 */ 126 struct mpt3_ioctl_pci_info { 127 union { 128 struct { 129 uint32_t device:5; 130 uint32_t function:3; 131 uint32_t bus:24; 132 } bits; 133 uint32_t word; 134 } u; 135 uint32_t segment_id; 136 }; 137 138 139 #define MPT2_IOCTL_INTERFACE_SCSI (0x00) 140 #define MPT2_IOCTL_INTERFACE_FC (0x01) 141 #define MPT2_IOCTL_INTERFACE_FC_IP (0x02) 142 #define MPT2_IOCTL_INTERFACE_SAS (0x03) 143 #define MPT2_IOCTL_INTERFACE_SAS2 (0x04) 144 #define MPT2_IOCTL_INTERFACE_SAS2_SSS6200 (0x05) 145 #define MPT3_IOCTL_INTERFACE_SAS3 (0x06) 146 #define MPT2_IOCTL_VERSION_LENGTH (32) 147 148 /** 149 * struct mpt3_ioctl_iocinfo - generic controller info 150 * @hdr - generic header 151 * @adapter_type - type of adapter (spi, fc, sas) 152 * @port_number - port number 153 * @pci_id - PCI Id 154 * @hw_rev - hardware revision 155 * @sub_system_device - PCI subsystem Device ID 156 * @sub_system_vendor - PCI subsystem Vendor ID 157 * @rsvd0 - reserved 158 * @firmware_version - firmware version 159 * @bios_version - BIOS version 160 * @driver_version - driver version - 32 ASCII characters 161 * @rsvd1 - reserved 162 * @scsi_id - scsi id of adapter 0 163 * @rsvd2 - reserved 164 * @pci_information - pci info (2nd revision) 165 */ 166 struct mpt3_ioctl_iocinfo { 167 struct mpt3_ioctl_header hdr; 168 uint32_t adapter_type; 169 uint32_t port_number; 170 uint32_t pci_id; 171 uint32_t hw_rev; 172 uint32_t subsystem_device; 173 uint32_t subsystem_vendor; 174 uint32_t rsvd0; 175 uint32_t firmware_version; 176 uint32_t bios_version; 177 uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH]; 178 uint8_t rsvd1; 179 uint8_t scsi_id; 180 uint16_t rsvd2; 181 struct mpt3_ioctl_pci_info pci_information; 182 }; 183 184 185 /* number of event log entries */ 186 #define MPT3SAS_CTL_EVENT_LOG_SIZE (50) 187 188 /** 189 * struct mpt3_ioctl_eventquery - query event count and type 190 * @hdr - generic header 191 * @event_entries - number of events returned by get_event_report 192 * @rsvd - reserved 193 * @event_types - type of events currently being captured 194 */ 195 struct mpt3_ioctl_eventquery { 196 struct mpt3_ioctl_header hdr; 197 uint16_t event_entries; 198 uint16_t rsvd; 199 uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; 200 }; 201 202 /** 203 * struct mpt3_ioctl_eventenable - enable/disable event capturing 204 * @hdr - generic header 205 * @event_types - toggle off/on type of events to be captured 206 */ 207 struct mpt3_ioctl_eventenable { 208 struct mpt3_ioctl_header hdr; 209 uint32_t event_types[4]; 210 }; 211 212 #define MPT3_EVENT_DATA_SIZE (192) 213 /** 214 * struct MPT3_IOCTL_EVENTS - 215 * @event - the event that was reported 216 * @context - unique value for each event assigned by driver 217 * @data - event data returned in fw reply message 218 */ 219 struct MPT3_IOCTL_EVENTS { 220 uint32_t event; 221 uint32_t context; 222 uint8_t data[MPT3_EVENT_DATA_SIZE]; 223 }; 224 225 /** 226 * struct mpt3_ioctl_eventreport - returing event log 227 * @hdr - generic header 228 * @event_data - (see struct MPT3_IOCTL_EVENTS) 229 */ 230 struct mpt3_ioctl_eventreport { 231 struct mpt3_ioctl_header hdr; 232 struct MPT3_IOCTL_EVENTS event_data[1]; 233 }; 234 235 /** 236 * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl 237 * @hdr - generic header 238 * @timeout - command timeout in seconds. (if zero then use driver default 239 * value). 240 * @reply_frame_buf_ptr - reply location 241 * @data_in_buf_ptr - destination for read 242 * @data_out_buf_ptr - data source for write 243 * @sense_data_ptr - sense data location 244 * @max_reply_bytes - maximum number of reply bytes to be sent to app. 245 * @data_in_size - number bytes for data transfer in (read) 246 * @data_out_size - number bytes for data transfer out (write) 247 * @max_sense_bytes - maximum number of bytes for auto sense buffers 248 * @data_sge_offset - offset in words from the start of the request message to 249 * the first SGL 250 * @mf[1]; 251 */ 252 struct mpt3_ioctl_command { 253 struct mpt3_ioctl_header hdr; 254 uint32_t timeout; 255 void __user *reply_frame_buf_ptr; 256 void __user *data_in_buf_ptr; 257 void __user *data_out_buf_ptr; 258 void __user *sense_data_ptr; 259 uint32_t max_reply_bytes; 260 uint32_t data_in_size; 261 uint32_t data_out_size; 262 uint32_t max_sense_bytes; 263 uint32_t data_sge_offset; 264 uint8_t mf[1]; 265 }; 266 267 #ifdef CONFIG_COMPAT 268 struct mpt3_ioctl_command32 { 269 struct mpt3_ioctl_header hdr; 270 uint32_t timeout; 271 uint32_t reply_frame_buf_ptr; 272 uint32_t data_in_buf_ptr; 273 uint32_t data_out_buf_ptr; 274 uint32_t sense_data_ptr; 275 uint32_t max_reply_bytes; 276 uint32_t data_in_size; 277 uint32_t data_out_size; 278 uint32_t max_sense_bytes; 279 uint32_t data_sge_offset; 280 uint8_t mf[1]; 281 }; 282 #endif 283 284 /** 285 * struct mpt3_ioctl_btdh_mapping - mapping info 286 * @hdr - generic header 287 * @id - target device identification number 288 * @bus - SCSI bus number that the target device exists on 289 * @handle - device handle for the target device 290 * @rsvd - reserved 291 * 292 * To obtain a bus/id the application sets 293 * handle to valid handle, and bus/id to 0xFFFF. 294 * 295 * To obtain the device handle the application sets 296 * bus/id valid value, and the handle to 0xFFFF. 297 */ 298 struct mpt3_ioctl_btdh_mapping { 299 struct mpt3_ioctl_header hdr; 300 uint32_t id; 301 uint32_t bus; 302 uint16_t handle; 303 uint16_t rsvd; 304 }; 305 306 307 308 /* application flags for mpt3_diag_register, mpt3_diag_query */ 309 #define MPT3_APP_FLAGS_APP_OWNED (0x0001) 310 #define MPT3_APP_FLAGS_BUFFER_VALID (0x0002) 311 #define MPT3_APP_FLAGS_FW_BUFFER_ACCESS (0x0004) 312 313 /* flags for mpt3_diag_read_buffer */ 314 #define MPT3_FLAGS_REREGISTER (0x0001) 315 316 #define MPT3_PRODUCT_SPECIFIC_DWORDS 23 317 318 /** 319 * struct mpt3_diag_register - application register with driver 320 * @hdr - generic header 321 * @reserved - 322 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED 323 * @application_flags - misc flags 324 * @diagnostic_flags - specifies flags affecting command processing 325 * @product_specific - product specific information 326 * @requested_buffer_size - buffers size in bytes 327 * @unique_id - tag specified by application that is used to signal ownership 328 * of the buffer. 329 * 330 * This will allow the driver to setup any required buffers that will be 331 * needed by firmware to communicate with the driver. 332 */ 333 struct mpt3_diag_register { 334 struct mpt3_ioctl_header hdr; 335 uint8_t reserved; 336 uint8_t buffer_type; 337 uint16_t application_flags; 338 uint32_t diagnostic_flags; 339 uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; 340 uint32_t requested_buffer_size; 341 uint32_t unique_id; 342 }; 343 344 /** 345 * struct mpt3_diag_unregister - application unregister with driver 346 * @hdr - generic header 347 * @unique_id - tag uniquely identifies the buffer to be unregistered 348 * 349 * This will allow the driver to cleanup any memory allocated for diag 350 * messages and to free up any resources. 351 */ 352 struct mpt3_diag_unregister { 353 struct mpt3_ioctl_header hdr; 354 uint32_t unique_id; 355 }; 356 357 /** 358 * struct mpt3_diag_query - query relevant info associated with diag buffers 359 * @hdr - generic header 360 * @reserved - 361 * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED 362 * @application_flags - misc flags 363 * @diagnostic_flags - specifies flags affecting command processing 364 * @product_specific - product specific information 365 * @total_buffer_size - diag buffer size in bytes 366 * @driver_added_buffer_size - size of extra space appended to end of buffer 367 * @unique_id - unique id associated with this buffer. 368 * 369 * The application will send only buffer_type and unique_id. Driver will 370 * inspect unique_id first, if valid, fill in all the info. If unique_id is 371 * 0x00, the driver will return info specified by Buffer Type. 372 */ 373 struct mpt3_diag_query { 374 struct mpt3_ioctl_header hdr; 375 uint8_t reserved; 376 uint8_t buffer_type; 377 uint16_t application_flags; 378 uint32_t diagnostic_flags; 379 uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS]; 380 uint32_t total_buffer_size; 381 uint32_t driver_added_buffer_size; 382 uint32_t unique_id; 383 }; 384 385 /** 386 * struct mpt3_diag_release - request to send Diag Release Message to firmware 387 * @hdr - generic header 388 * @unique_id - tag uniquely identifies the buffer to be released 389 * 390 * This allows ownership of the specified buffer to returned to the driver, 391 * allowing an application to read the buffer without fear that firmware is 392 * overwritting information in the buffer. 393 */ 394 struct mpt3_diag_release { 395 struct mpt3_ioctl_header hdr; 396 uint32_t unique_id; 397 }; 398 399 /** 400 * struct mpt3_diag_read_buffer - request for copy of the diag buffer 401 * @hdr - generic header 402 * @status - 403 * @reserved - 404 * @flags - misc flags 405 * @starting_offset - starting offset within drivers buffer where to start 406 * reading data at into the specified application buffer 407 * @bytes_to_read - number of bytes to copy from the drivers buffer into the 408 * application buffer starting at starting_offset. 409 * @unique_id - unique id associated with this buffer. 410 * @diagnostic_data - data payload 411 */ 412 struct mpt3_diag_read_buffer { 413 struct mpt3_ioctl_header hdr; 414 uint8_t status; 415 uint8_t reserved; 416 uint16_t flags; 417 uint32_t starting_offset; 418 uint32_t bytes_to_read; 419 uint32_t unique_id; 420 uint32_t diagnostic_data[1]; 421 }; 422 423 #endif /* MPT3SAS_CTL_H_INCLUDED */ 424