1 /* 2 * 3 * Linux MegaRAID device driver 4 * 5 * Copyright (c) 2002 LSI Logic Corporation. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * as published by the Free Software Foundation; either version 10 * 2 of the License, or (at your option) any later version. 11 * 12 * Copyright (c) 2002 Red Hat, Inc. All rights reserved. 13 * - fixes 14 * - speed-ups (list handling fixes, issued_list, optimizations.) 15 * - lots of cleanups. 16 * 17 * Copyright (c) 2003 Christoph Hellwig <hch@lst.de> 18 * - new-style, hotplug-aware pci probing and scsi registration 19 * 20 * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju 21 * <Seokmann.Ju@lsil.com> 22 * 23 * Description: Linux device driver for LSI Logic MegaRAID controller 24 * 25 * Supported controllers: MegaRAID 418, 428, 438, 466, 762, 467, 471, 490, 493 26 * 518, 520, 531, 532 27 * 28 * This driver is supported by LSI Logic, with assistance from Red Hat, Dell, 29 * and others. Please send updates to the mailing list 30 * linux-scsi@vger.kernel.org . 31 * 32 */ 33 34 #include <linux/mm.h> 35 #include <linux/fs.h> 36 #include <linux/blkdev.h> 37 #include <asm/uaccess.h> 38 #include <asm/io.h> 39 #include <linux/completion.h> 40 #include <linux/delay.h> 41 #include <linux/proc_fs.h> 42 #include <linux/reboot.h> 43 #include <linux/module.h> 44 #include <linux/list.h> 45 #include <linux/interrupt.h> 46 #include <linux/pci.h> 47 #include <linux/init.h> 48 #include <linux/dma-mapping.h> 49 #include <linux/mutex.h> 50 #include <linux/slab.h> 51 #include <scsi/scsicam.h> 52 53 #include "scsi.h" 54 #include <scsi/scsi_host.h> 55 56 #include "megaraid.h" 57 58 #define MEGARAID_MODULE_VERSION "2.00.4" 59 60 MODULE_AUTHOR ("sju@lsil.com"); 61 MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver"); 62 MODULE_LICENSE ("GPL"); 63 MODULE_VERSION(MEGARAID_MODULE_VERSION); 64 65 static DEFINE_MUTEX(megadev_mutex); 66 static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN; 67 module_param(max_cmd_per_lun, uint, 0); 68 MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)"); 69 70 static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO; 71 module_param(max_sectors_per_io, ushort, 0); 72 MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)"); 73 74 75 static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT; 76 module_param(max_mbox_busy_wait, ushort, 0); 77 MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)"); 78 79 #define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20) 80 #define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C) 81 #define WRINDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x20) 82 #define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C) 83 84 /* 85 * Global variables 86 */ 87 88 static int hba_count; 89 static adapter_t *hba_soft_state[MAX_CONTROLLERS]; 90 static struct proc_dir_entry *mega_proc_dir_entry; 91 92 /* For controller re-ordering */ 93 static struct mega_hbas mega_hbas[MAX_CONTROLLERS]; 94 95 static long 96 megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); 97 98 /* 99 * The File Operations structure for the serial/ioctl interface of the driver 100 */ 101 static const struct file_operations megadev_fops = { 102 .owner = THIS_MODULE, 103 .unlocked_ioctl = megadev_unlocked_ioctl, 104 .open = megadev_open, 105 .llseek = noop_llseek, 106 }; 107 108 /* 109 * Array to structures for storing the information about the controllers. This 110 * information is sent to the user level applications, when they do an ioctl 111 * for this information. 112 */ 113 static struct mcontroller mcontroller[MAX_CONTROLLERS]; 114 115 /* The current driver version */ 116 static u32 driver_ver = 0x02000000; 117 118 /* major number used by the device for character interface */ 119 static int major; 120 121 #define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01) 122 123 124 /* 125 * Debug variable to print some diagnostic messages 126 */ 127 static int trace_level; 128 129 /** 130 * mega_setup_mailbox() 131 * @adapter - pointer to our soft state 132 * 133 * Allocates a 8 byte aligned memory for the handshake mailbox. 134 */ 135 static int 136 mega_setup_mailbox(adapter_t *adapter) 137 { 138 unsigned long align; 139 140 adapter->una_mbox64 = pci_alloc_consistent(adapter->dev, 141 sizeof(mbox64_t), &adapter->una_mbox64_dma); 142 143 if( !adapter->una_mbox64 ) return -1; 144 145 adapter->mbox = &adapter->una_mbox64->mbox; 146 147 adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) & 148 (~0UL ^ 0xFUL)); 149 150 adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8); 151 152 align = ((void *)adapter->mbox) - ((void *)&adapter->una_mbox64->mbox); 153 154 adapter->mbox_dma = adapter->una_mbox64_dma + 8 + align; 155 156 /* 157 * Register the mailbox if the controller is an io-mapped controller 158 */ 159 if( adapter->flag & BOARD_IOMAP ) { 160 161 outb(adapter->mbox_dma & 0xFF, 162 adapter->host->io_port + MBOX_PORT0); 163 164 outb((adapter->mbox_dma >> 8) & 0xFF, 165 adapter->host->io_port + MBOX_PORT1); 166 167 outb((adapter->mbox_dma >> 16) & 0xFF, 168 adapter->host->io_port + MBOX_PORT2); 169 170 outb((adapter->mbox_dma >> 24) & 0xFF, 171 adapter->host->io_port + MBOX_PORT3); 172 173 outb(ENABLE_MBOX_BYTE, 174 adapter->host->io_port + ENABLE_MBOX_REGION); 175 176 irq_ack(adapter); 177 178 irq_enable(adapter); 179 } 180 181 return 0; 182 } 183 184 185 /* 186 * mega_query_adapter() 187 * @adapter - pointer to our soft state 188 * 189 * Issue the adapter inquiry commands to the controller and find out 190 * information and parameter about the devices attached 191 */ 192 static int 193 mega_query_adapter(adapter_t *adapter) 194 { 195 dma_addr_t prod_info_dma_handle; 196 mega_inquiry3 *inquiry3; 197 u8 raw_mbox[sizeof(struct mbox_out)]; 198 mbox_t *mbox; 199 int retval; 200 201 /* Initialize adapter inquiry mailbox */ 202 203 mbox = (mbox_t *)raw_mbox; 204 205 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 206 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 207 208 /* 209 * Try to issue Inquiry3 command 210 * if not succeeded, then issue MEGA_MBOXCMD_ADAPTERINQ command and 211 * update enquiry3 structure 212 */ 213 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 214 215 inquiry3 = (mega_inquiry3 *)adapter->mega_buffer; 216 217 raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */ 218 raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */ 219 raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */ 220 221 /* Issue a blocking command to the card */ 222 if ((retval = issue_scb_block(adapter, raw_mbox))) { 223 /* the adapter does not support 40ld */ 224 225 mraid_ext_inquiry *ext_inq; 226 mraid_inquiry *inq; 227 dma_addr_t dma_handle; 228 229 ext_inq = pci_alloc_consistent(adapter->dev, 230 sizeof(mraid_ext_inquiry), &dma_handle); 231 232 if( ext_inq == NULL ) return -1; 233 234 inq = &ext_inq->raid_inq; 235 236 mbox->m_out.xferaddr = (u32)dma_handle; 237 238 /*issue old 0x04 command to adapter */ 239 mbox->m_out.cmd = MEGA_MBOXCMD_ADPEXTINQ; 240 241 issue_scb_block(adapter, raw_mbox); 242 243 /* 244 * update Enquiry3 and ProductInfo structures with 245 * mraid_inquiry structure 246 */ 247 mega_8_to_40ld(inq, inquiry3, 248 (mega_product_info *)&adapter->product_info); 249 250 pci_free_consistent(adapter->dev, sizeof(mraid_ext_inquiry), 251 ext_inq, dma_handle); 252 253 } else { /*adapter supports 40ld */ 254 adapter->flag |= BOARD_40LD; 255 256 /* 257 * get product_info, which is static information and will be 258 * unchanged 259 */ 260 prod_info_dma_handle = pci_map_single(adapter->dev, (void *) 261 &adapter->product_info, 262 sizeof(mega_product_info), PCI_DMA_FROMDEVICE); 263 264 mbox->m_out.xferaddr = prod_info_dma_handle; 265 266 raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */ 267 raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */ 268 269 if ((retval = issue_scb_block(adapter, raw_mbox))) 270 printk(KERN_WARNING 271 "megaraid: Product_info cmd failed with error: %d\n", 272 retval); 273 274 pci_unmap_single(adapter->dev, prod_info_dma_handle, 275 sizeof(mega_product_info), PCI_DMA_FROMDEVICE); 276 } 277 278 279 /* 280 * kernel scans the channels from 0 to <= max_channel 281 */ 282 adapter->host->max_channel = 283 adapter->product_info.nchannels + NVIRT_CHAN -1; 284 285 adapter->host->max_id = 16; /* max targets per channel */ 286 287 adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */ 288 289 adapter->host->cmd_per_lun = max_cmd_per_lun; 290 291 adapter->numldrv = inquiry3->num_ldrv; 292 293 adapter->max_cmds = adapter->product_info.max_commands; 294 295 if(adapter->max_cmds > MAX_COMMANDS) 296 adapter->max_cmds = MAX_COMMANDS; 297 298 adapter->host->can_queue = adapter->max_cmds - 1; 299 300 /* 301 * Get the maximum number of scatter-gather elements supported by this 302 * firmware 303 */ 304 mega_get_max_sgl(adapter); 305 306 adapter->host->sg_tablesize = adapter->sglen; 307 308 /* use HP firmware and bios version encoding 309 Note: fw_version[0|1] and bios_version[0|1] were originally shifted 310 right 8 bits making them zero. This 0 value was hardcoded to fix 311 sparse warnings. */ 312 if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) { 313 sprintf (adapter->fw_version, "%c%d%d.%d%d", 314 adapter->product_info.fw_version[2], 315 0, 316 adapter->product_info.fw_version[1] & 0x0f, 317 0, 318 adapter->product_info.fw_version[0] & 0x0f); 319 sprintf (adapter->bios_version, "%c%d%d.%d%d", 320 adapter->product_info.bios_version[2], 321 0, 322 adapter->product_info.bios_version[1] & 0x0f, 323 0, 324 adapter->product_info.bios_version[0] & 0x0f); 325 } else { 326 memcpy(adapter->fw_version, 327 (char *)adapter->product_info.fw_version, 4); 328 adapter->fw_version[4] = 0; 329 330 memcpy(adapter->bios_version, 331 (char *)adapter->product_info.bios_version, 4); 332 333 adapter->bios_version[4] = 0; 334 } 335 336 printk(KERN_NOTICE "megaraid: [%s:%s] detected %d logical drives.\n", 337 adapter->fw_version, adapter->bios_version, adapter->numldrv); 338 339 /* 340 * Do we support extended (>10 bytes) cdbs 341 */ 342 adapter->support_ext_cdb = mega_support_ext_cdb(adapter); 343 if (adapter->support_ext_cdb) 344 printk(KERN_NOTICE "megaraid: supports extended CDBs.\n"); 345 346 347 return 0; 348 } 349 350 /** 351 * mega_runpendq() 352 * @adapter - pointer to our soft state 353 * 354 * Runs through the list of pending requests. 355 */ 356 static inline void 357 mega_runpendq(adapter_t *adapter) 358 { 359 if(!list_empty(&adapter->pending_list)) 360 __mega_runpendq(adapter); 361 } 362 363 /* 364 * megaraid_queue() 365 * @scmd - Issue this scsi command 366 * @done - the callback hook into the scsi mid-layer 367 * 368 * The command queuing entry point for the mid-layer. 369 */ 370 static int 371 megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *)) 372 { 373 adapter_t *adapter; 374 scb_t *scb; 375 int busy=0; 376 unsigned long flags; 377 378 adapter = (adapter_t *)scmd->device->host->hostdata; 379 380 scmd->scsi_done = done; 381 382 383 /* 384 * Allocate and build a SCB request 385 * busy flag will be set if mega_build_cmd() command could not 386 * allocate scb. We will return non-zero status in that case. 387 * NOTE: scb can be null even though certain commands completed 388 * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would 389 * return 0 in that case. 390 */ 391 392 spin_lock_irqsave(&adapter->lock, flags); 393 scb = mega_build_cmd(adapter, scmd, &busy); 394 if (!scb) 395 goto out; 396 397 scb->state |= SCB_PENDQ; 398 list_add_tail(&scb->list, &adapter->pending_list); 399 400 /* 401 * Check if the HBA is in quiescent state, e.g., during a 402 * delete logical drive opertion. If it is, don't run 403 * the pending_list. 404 */ 405 if (atomic_read(&adapter->quiescent) == 0) 406 mega_runpendq(adapter); 407 408 busy = 0; 409 out: 410 spin_unlock_irqrestore(&adapter->lock, flags); 411 return busy; 412 } 413 414 static DEF_SCSI_QCMD(megaraid_queue) 415 416 /** 417 * mega_allocate_scb() 418 * @adapter - pointer to our soft state 419 * @cmd - scsi command from the mid-layer 420 * 421 * Allocate a SCB structure. This is the central structure for controller 422 * commands. 423 */ 424 static inline scb_t * 425 mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd) 426 { 427 struct list_head *head = &adapter->free_list; 428 scb_t *scb; 429 430 /* Unlink command from Free List */ 431 if( !list_empty(head) ) { 432 433 scb = list_entry(head->next, scb_t, list); 434 435 list_del_init(head->next); 436 437 scb->state = SCB_ACTIVE; 438 scb->cmd = cmd; 439 scb->dma_type = MEGA_DMA_TYPE_NONE; 440 441 return scb; 442 } 443 444 return NULL; 445 } 446 447 /** 448 * mega_get_ldrv_num() 449 * @adapter - pointer to our soft state 450 * @cmd - scsi mid layer command 451 * @channel - channel on the controller 452 * 453 * Calculate the logical drive number based on the information in scsi command 454 * and the channel number. 455 */ 456 static inline int 457 mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel) 458 { 459 int tgt; 460 int ldrv_num; 461 462 tgt = cmd->device->id; 463 464 if ( tgt > adapter->this_id ) 465 tgt--; /* we do not get inquires for initiator id */ 466 467 ldrv_num = (channel * 15) + tgt; 468 469 470 /* 471 * If we have a logical drive with boot enabled, project it first 472 */ 473 if( adapter->boot_ldrv_enabled ) { 474 if( ldrv_num == 0 ) { 475 ldrv_num = adapter->boot_ldrv; 476 } 477 else { 478 if( ldrv_num <= adapter->boot_ldrv ) { 479 ldrv_num--; 480 } 481 } 482 } 483 484 /* 485 * If "delete logical drive" feature is enabled on this controller. 486 * Do only if at least one delete logical drive operation was done. 487 * 488 * Also, after logical drive deletion, instead of logical drive number, 489 * the value returned should be 0x80+logical drive id. 490 * 491 * These is valid only for IO commands. 492 */ 493 494 if (adapter->support_random_del && adapter->read_ldidmap ) 495 switch (cmd->cmnd[0]) { 496 case READ_6: /* fall through */ 497 case WRITE_6: /* fall through */ 498 case READ_10: /* fall through */ 499 case WRITE_10: 500 ldrv_num += 0x80; 501 } 502 503 return ldrv_num; 504 } 505 506 /** 507 * mega_build_cmd() 508 * @adapter - pointer to our soft state 509 * @cmd - Prepare using this scsi command 510 * @busy - busy flag if no resources 511 * 512 * Prepares a command and scatter gather list for the controller. This routine 513 * also finds out if the commands is intended for a logical drive or a 514 * physical device and prepares the controller command accordingly. 515 * 516 * We also re-order the logical drives and physical devices based on their 517 * boot settings. 518 */ 519 static scb_t * 520 mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy) 521 { 522 mega_ext_passthru *epthru; 523 mega_passthru *pthru; 524 scb_t *scb; 525 mbox_t *mbox; 526 u32 seg; 527 char islogical; 528 int max_ldrv_num; 529 int channel = 0; 530 int target = 0; 531 int ldrv_num = 0; /* logical drive number */ 532 533 534 /* 535 * filter the internal and ioctl commands 536 */ 537 if((cmd->cmnd[0] == MEGA_INTERNAL_CMD)) 538 return (scb_t *)cmd->host_scribble; 539 540 /* 541 * We know what channels our logical drives are on - mega_find_card() 542 */ 543 islogical = adapter->logdrv_chan[cmd->device->channel]; 544 545 /* 546 * The theory: If physical drive is chosen for boot, all the physical 547 * devices are exported before the logical drives, otherwise physical 548 * devices are pushed after logical drives, in which case - Kernel sees 549 * the physical devices on virtual channel which is obviously converted 550 * to actual channel on the HBA. 551 */ 552 if( adapter->boot_pdrv_enabled ) { 553 if( islogical ) { 554 /* logical channel */ 555 channel = cmd->device->channel - 556 adapter->product_info.nchannels; 557 } 558 else { 559 /* this is physical channel */ 560 channel = cmd->device->channel; 561 target = cmd->device->id; 562 563 /* 564 * boot from a physical disk, that disk needs to be 565 * exposed first IF both the channels are SCSI, then 566 * booting from the second channel is not allowed. 567 */ 568 if( target == 0 ) { 569 target = adapter->boot_pdrv_tgt; 570 } 571 else if( target == adapter->boot_pdrv_tgt ) { 572 target = 0; 573 } 574 } 575 } 576 else { 577 if( islogical ) { 578 /* this is the logical channel */ 579 channel = cmd->device->channel; 580 } 581 else { 582 /* physical channel */ 583 channel = cmd->device->channel - NVIRT_CHAN; 584 target = cmd->device->id; 585 } 586 } 587 588 589 if(islogical) { 590 591 /* have just LUN 0 for each target on virtual channels */ 592 if (cmd->device->lun) { 593 cmd->result = (DID_BAD_TARGET << 16); 594 cmd->scsi_done(cmd); 595 return NULL; 596 } 597 598 ldrv_num = mega_get_ldrv_num(adapter, cmd, channel); 599 600 601 max_ldrv_num = (adapter->flag & BOARD_40LD) ? 602 MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD; 603 604 /* 605 * max_ldrv_num increases by 0x80 if some logical drive was 606 * deleted. 607 */ 608 if(adapter->read_ldidmap) 609 max_ldrv_num += 0x80; 610 611 if(ldrv_num > max_ldrv_num ) { 612 cmd->result = (DID_BAD_TARGET << 16); 613 cmd->scsi_done(cmd); 614 return NULL; 615 } 616 617 } 618 else { 619 if( cmd->device->lun > 7) { 620 /* 621 * Do not support lun >7 for physically accessed 622 * devices 623 */ 624 cmd->result = (DID_BAD_TARGET << 16); 625 cmd->scsi_done(cmd); 626 return NULL; 627 } 628 } 629 630 /* 631 * 632 * Logical drive commands 633 * 634 */ 635 if(islogical) { 636 switch (cmd->cmnd[0]) { 637 case TEST_UNIT_READY: 638 #if MEGA_HAVE_CLUSTERING 639 /* 640 * Do we support clustering and is the support enabled 641 * If no, return success always 642 */ 643 if( !adapter->has_cluster ) { 644 cmd->result = (DID_OK << 16); 645 cmd->scsi_done(cmd); 646 return NULL; 647 } 648 649 if(!(scb = mega_allocate_scb(adapter, cmd))) { 650 *busy = 1; 651 return NULL; 652 } 653 654 scb->raw_mbox[0] = MEGA_CLUSTER_CMD; 655 scb->raw_mbox[2] = MEGA_RESERVATION_STATUS; 656 scb->raw_mbox[3] = ldrv_num; 657 658 scb->dma_direction = PCI_DMA_NONE; 659 660 return scb; 661 #else 662 cmd->result = (DID_OK << 16); 663 cmd->scsi_done(cmd); 664 return NULL; 665 #endif 666 667 case MODE_SENSE: { 668 char *buf; 669 struct scatterlist *sg; 670 671 sg = scsi_sglist(cmd); 672 buf = kmap_atomic(sg_page(sg)) + sg->offset; 673 674 memset(buf, 0, cmd->cmnd[4]); 675 kunmap_atomic(buf - sg->offset); 676 677 cmd->result = (DID_OK << 16); 678 cmd->scsi_done(cmd); 679 return NULL; 680 } 681 682 case READ_CAPACITY: 683 case INQUIRY: 684 685 if(!(adapter->flag & (1L << cmd->device->channel))) { 686 687 printk(KERN_NOTICE 688 "scsi%d: scanning scsi channel %d ", 689 adapter->host->host_no, 690 cmd->device->channel); 691 printk("for logical drives.\n"); 692 693 adapter->flag |= (1L << cmd->device->channel); 694 } 695 696 /* Allocate a SCB and initialize passthru */ 697 if(!(scb = mega_allocate_scb(adapter, cmd))) { 698 *busy = 1; 699 return NULL; 700 } 701 pthru = scb->pthru; 702 703 mbox = (mbox_t *)scb->raw_mbox; 704 memset(mbox, 0, sizeof(scb->raw_mbox)); 705 memset(pthru, 0, sizeof(mega_passthru)); 706 707 pthru->timeout = 0; 708 pthru->ars = 1; 709 pthru->reqsenselen = 14; 710 pthru->islogical = 1; 711 pthru->logdrv = ldrv_num; 712 pthru->cdblen = cmd->cmd_len; 713 memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len); 714 715 if( adapter->has_64bit_addr ) { 716 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64; 717 } 718 else { 719 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU; 720 } 721 722 scb->dma_direction = PCI_DMA_FROMDEVICE; 723 724 pthru->numsgelements = mega_build_sglist(adapter, scb, 725 &pthru->dataxferaddr, &pthru->dataxferlen); 726 727 mbox->m_out.xferaddr = scb->pthru_dma_addr; 728 729 return scb; 730 731 case READ_6: 732 case WRITE_6: 733 case READ_10: 734 case WRITE_10: 735 case READ_12: 736 case WRITE_12: 737 738 /* Allocate a SCB and initialize mailbox */ 739 if(!(scb = mega_allocate_scb(adapter, cmd))) { 740 *busy = 1; 741 return NULL; 742 } 743 mbox = (mbox_t *)scb->raw_mbox; 744 745 memset(mbox, 0, sizeof(scb->raw_mbox)); 746 mbox->m_out.logdrv = ldrv_num; 747 748 /* 749 * A little hack: 2nd bit is zero for all scsi read 750 * commands and is set for all scsi write commands 751 */ 752 if( adapter->has_64bit_addr ) { 753 mbox->m_out.cmd = (*cmd->cmnd & 0x02) ? 754 MEGA_MBOXCMD_LWRITE64: 755 MEGA_MBOXCMD_LREAD64 ; 756 } 757 else { 758 mbox->m_out.cmd = (*cmd->cmnd & 0x02) ? 759 MEGA_MBOXCMD_LWRITE: 760 MEGA_MBOXCMD_LREAD ; 761 } 762 763 /* 764 * 6-byte READ(0x08) or WRITE(0x0A) cdb 765 */ 766 if( cmd->cmd_len == 6 ) { 767 mbox->m_out.numsectors = (u32) cmd->cmnd[4]; 768 mbox->m_out.lba = 769 ((u32)cmd->cmnd[1] << 16) | 770 ((u32)cmd->cmnd[2] << 8) | 771 (u32)cmd->cmnd[3]; 772 773 mbox->m_out.lba &= 0x1FFFFF; 774 775 #if MEGA_HAVE_STATS 776 /* 777 * Take modulo 0x80, since the logical drive 778 * number increases by 0x80 when a logical 779 * drive was deleted 780 */ 781 if (*cmd->cmnd == READ_6) { 782 adapter->nreads[ldrv_num%0x80]++; 783 adapter->nreadblocks[ldrv_num%0x80] += 784 mbox->m_out.numsectors; 785 } else { 786 adapter->nwrites[ldrv_num%0x80]++; 787 adapter->nwriteblocks[ldrv_num%0x80] += 788 mbox->m_out.numsectors; 789 } 790 #endif 791 } 792 793 /* 794 * 10-byte READ(0x28) or WRITE(0x2A) cdb 795 */ 796 if( cmd->cmd_len == 10 ) { 797 mbox->m_out.numsectors = 798 (u32)cmd->cmnd[8] | 799 ((u32)cmd->cmnd[7] << 8); 800 mbox->m_out.lba = 801 ((u32)cmd->cmnd[2] << 24) | 802 ((u32)cmd->cmnd[3] << 16) | 803 ((u32)cmd->cmnd[4] << 8) | 804 (u32)cmd->cmnd[5]; 805 806 #if MEGA_HAVE_STATS 807 if (*cmd->cmnd == READ_10) { 808 adapter->nreads[ldrv_num%0x80]++; 809 adapter->nreadblocks[ldrv_num%0x80] += 810 mbox->m_out.numsectors; 811 } else { 812 adapter->nwrites[ldrv_num%0x80]++; 813 adapter->nwriteblocks[ldrv_num%0x80] += 814 mbox->m_out.numsectors; 815 } 816 #endif 817 } 818 819 /* 820 * 12-byte READ(0xA8) or WRITE(0xAA) cdb 821 */ 822 if( cmd->cmd_len == 12 ) { 823 mbox->m_out.lba = 824 ((u32)cmd->cmnd[2] << 24) | 825 ((u32)cmd->cmnd[3] << 16) | 826 ((u32)cmd->cmnd[4] << 8) | 827 (u32)cmd->cmnd[5]; 828 829 mbox->m_out.numsectors = 830 ((u32)cmd->cmnd[6] << 24) | 831 ((u32)cmd->cmnd[7] << 16) | 832 ((u32)cmd->cmnd[8] << 8) | 833 (u32)cmd->cmnd[9]; 834 835 #if MEGA_HAVE_STATS 836 if (*cmd->cmnd == READ_12) { 837 adapter->nreads[ldrv_num%0x80]++; 838 adapter->nreadblocks[ldrv_num%0x80] += 839 mbox->m_out.numsectors; 840 } else { 841 adapter->nwrites[ldrv_num%0x80]++; 842 adapter->nwriteblocks[ldrv_num%0x80] += 843 mbox->m_out.numsectors; 844 } 845 #endif 846 } 847 848 /* 849 * If it is a read command 850 */ 851 if( (*cmd->cmnd & 0x0F) == 0x08 ) { 852 scb->dma_direction = PCI_DMA_FROMDEVICE; 853 } 854 else { 855 scb->dma_direction = PCI_DMA_TODEVICE; 856 } 857 858 /* Calculate Scatter-Gather info */ 859 mbox->m_out.numsgelements = mega_build_sglist(adapter, scb, 860 (u32 *)&mbox->m_out.xferaddr, &seg); 861 862 return scb; 863 864 #if MEGA_HAVE_CLUSTERING 865 case RESERVE: /* Fall through */ 866 case RELEASE: 867 868 /* 869 * Do we support clustering and is the support enabled 870 */ 871 if( ! adapter->has_cluster ) { 872 873 cmd->result = (DID_BAD_TARGET << 16); 874 cmd->scsi_done(cmd); 875 return NULL; 876 } 877 878 /* Allocate a SCB and initialize mailbox */ 879 if(!(scb = mega_allocate_scb(adapter, cmd))) { 880 *busy = 1; 881 return NULL; 882 } 883 884 scb->raw_mbox[0] = MEGA_CLUSTER_CMD; 885 scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ? 886 MEGA_RESERVE_LD : MEGA_RELEASE_LD; 887 888 scb->raw_mbox[3] = ldrv_num; 889 890 scb->dma_direction = PCI_DMA_NONE; 891 892 return scb; 893 #endif 894 895 default: 896 cmd->result = (DID_BAD_TARGET << 16); 897 cmd->scsi_done(cmd); 898 return NULL; 899 } 900 } 901 902 /* 903 * Passthru drive commands 904 */ 905 else { 906 /* Allocate a SCB and initialize passthru */ 907 if(!(scb = mega_allocate_scb(adapter, cmd))) { 908 *busy = 1; 909 return NULL; 910 } 911 912 mbox = (mbox_t *)scb->raw_mbox; 913 memset(mbox, 0, sizeof(scb->raw_mbox)); 914 915 if( adapter->support_ext_cdb ) { 916 917 epthru = mega_prepare_extpassthru(adapter, scb, cmd, 918 channel, target); 919 920 mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU; 921 922 mbox->m_out.xferaddr = scb->epthru_dma_addr; 923 924 } 925 else { 926 927 pthru = mega_prepare_passthru(adapter, scb, cmd, 928 channel, target); 929 930 /* Initialize mailbox */ 931 if( adapter->has_64bit_addr ) { 932 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64; 933 } 934 else { 935 mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU; 936 } 937 938 mbox->m_out.xferaddr = scb->pthru_dma_addr; 939 940 } 941 return scb; 942 } 943 return NULL; 944 } 945 946 947 /** 948 * mega_prepare_passthru() 949 * @adapter - pointer to our soft state 950 * @scb - our scsi control block 951 * @cmd - scsi command from the mid-layer 952 * @channel - actual channel on the controller 953 * @target - actual id on the controller. 954 * 955 * prepare a command for the scsi physical devices. 956 */ 957 static mega_passthru * 958 mega_prepare_passthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd, 959 int channel, int target) 960 { 961 mega_passthru *pthru; 962 963 pthru = scb->pthru; 964 memset(pthru, 0, sizeof (mega_passthru)); 965 966 /* 0=6sec/1=60sec/2=10min/3=3hrs */ 967 pthru->timeout = 2; 968 969 pthru->ars = 1; 970 pthru->reqsenselen = 14; 971 pthru->islogical = 0; 972 973 pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel; 974 975 pthru->target = (adapter->flag & BOARD_40LD) ? 976 (channel << 4) | target : target; 977 978 pthru->cdblen = cmd->cmd_len; 979 pthru->logdrv = cmd->device->lun; 980 981 memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len); 982 983 /* Not sure about the direction */ 984 scb->dma_direction = PCI_DMA_BIDIRECTIONAL; 985 986 /* Special Code for Handling READ_CAPA/ INQ using bounce buffers */ 987 switch (cmd->cmnd[0]) { 988 case INQUIRY: 989 case READ_CAPACITY: 990 if(!(adapter->flag & (1L << cmd->device->channel))) { 991 992 printk(KERN_NOTICE 993 "scsi%d: scanning scsi channel %d [P%d] ", 994 adapter->host->host_no, 995 cmd->device->channel, channel); 996 printk("for physical devices.\n"); 997 998 adapter->flag |= (1L << cmd->device->channel); 999 } 1000 /* Fall through */ 1001 default: 1002 pthru->numsgelements = mega_build_sglist(adapter, scb, 1003 &pthru->dataxferaddr, &pthru->dataxferlen); 1004 break; 1005 } 1006 return pthru; 1007 } 1008 1009 1010 /** 1011 * mega_prepare_extpassthru() 1012 * @adapter - pointer to our soft state 1013 * @scb - our scsi control block 1014 * @cmd - scsi command from the mid-layer 1015 * @channel - actual channel on the controller 1016 * @target - actual id on the controller. 1017 * 1018 * prepare a command for the scsi physical devices. This rountine prepares 1019 * commands for devices which can take extended CDBs (>10 bytes) 1020 */ 1021 static mega_ext_passthru * 1022 mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd, 1023 int channel, int target) 1024 { 1025 mega_ext_passthru *epthru; 1026 1027 epthru = scb->epthru; 1028 memset(epthru, 0, sizeof(mega_ext_passthru)); 1029 1030 /* 0=6sec/1=60sec/2=10min/3=3hrs */ 1031 epthru->timeout = 2; 1032 1033 epthru->ars = 1; 1034 epthru->reqsenselen = 14; 1035 epthru->islogical = 0; 1036 1037 epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel; 1038 epthru->target = (adapter->flag & BOARD_40LD) ? 1039 (channel << 4) | target : target; 1040 1041 epthru->cdblen = cmd->cmd_len; 1042 epthru->logdrv = cmd->device->lun; 1043 1044 memcpy(epthru->cdb, cmd->cmnd, cmd->cmd_len); 1045 1046 /* Not sure about the direction */ 1047 scb->dma_direction = PCI_DMA_BIDIRECTIONAL; 1048 1049 switch(cmd->cmnd[0]) { 1050 case INQUIRY: 1051 case READ_CAPACITY: 1052 if(!(adapter->flag & (1L << cmd->device->channel))) { 1053 1054 printk(KERN_NOTICE 1055 "scsi%d: scanning scsi channel %d [P%d] ", 1056 adapter->host->host_no, 1057 cmd->device->channel, channel); 1058 printk("for physical devices.\n"); 1059 1060 adapter->flag |= (1L << cmd->device->channel); 1061 } 1062 /* Fall through */ 1063 default: 1064 epthru->numsgelements = mega_build_sglist(adapter, scb, 1065 &epthru->dataxferaddr, &epthru->dataxferlen); 1066 break; 1067 } 1068 1069 return epthru; 1070 } 1071 1072 static void 1073 __mega_runpendq(adapter_t *adapter) 1074 { 1075 scb_t *scb; 1076 struct list_head *pos, *next; 1077 1078 /* Issue any pending commands to the card */ 1079 list_for_each_safe(pos, next, &adapter->pending_list) { 1080 1081 scb = list_entry(pos, scb_t, list); 1082 1083 if( !(scb->state & SCB_ISSUED) ) { 1084 1085 if( issue_scb(adapter, scb) != 0 ) 1086 return; 1087 } 1088 } 1089 1090 return; 1091 } 1092 1093 1094 /** 1095 * issue_scb() 1096 * @adapter - pointer to our soft state 1097 * @scb - scsi control block 1098 * 1099 * Post a command to the card if the mailbox is available, otherwise return 1100 * busy. We also take the scb from the pending list if the mailbox is 1101 * available. 1102 */ 1103 static int 1104 issue_scb(adapter_t *adapter, scb_t *scb) 1105 { 1106 volatile mbox64_t *mbox64 = adapter->mbox64; 1107 volatile mbox_t *mbox = adapter->mbox; 1108 unsigned int i = 0; 1109 1110 if(unlikely(mbox->m_in.busy)) { 1111 do { 1112 udelay(1); 1113 i++; 1114 } while( mbox->m_in.busy && (i < max_mbox_busy_wait) ); 1115 1116 if(mbox->m_in.busy) return -1; 1117 } 1118 1119 /* Copy mailbox data into host structure */ 1120 memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox, 1121 sizeof(struct mbox_out)); 1122 1123 mbox->m_out.cmdid = scb->idx; /* Set cmdid */ 1124 mbox->m_in.busy = 1; /* Set busy */ 1125 1126 1127 /* 1128 * Increment the pending queue counter 1129 */ 1130 atomic_inc(&adapter->pend_cmds); 1131 1132 switch (mbox->m_out.cmd) { 1133 case MEGA_MBOXCMD_LREAD64: 1134 case MEGA_MBOXCMD_LWRITE64: 1135 case MEGA_MBOXCMD_PASSTHRU64: 1136 case MEGA_MBOXCMD_EXTPTHRU: 1137 mbox64->xfer_segment_lo = mbox->m_out.xferaddr; 1138 mbox64->xfer_segment_hi = 0; 1139 mbox->m_out.xferaddr = 0xFFFFFFFF; 1140 break; 1141 default: 1142 mbox64->xfer_segment_lo = 0; 1143 mbox64->xfer_segment_hi = 0; 1144 } 1145 1146 /* 1147 * post the command 1148 */ 1149 scb->state |= SCB_ISSUED; 1150 1151 if( likely(adapter->flag & BOARD_MEMMAP) ) { 1152 mbox->m_in.poll = 0; 1153 mbox->m_in.ack = 0; 1154 WRINDOOR(adapter, adapter->mbox_dma | 0x1); 1155 } 1156 else { 1157 irq_enable(adapter); 1158 issue_command(adapter); 1159 } 1160 1161 return 0; 1162 } 1163 1164 /* 1165 * Wait until the controller's mailbox is available 1166 */ 1167 static inline int 1168 mega_busywait_mbox (adapter_t *adapter) 1169 { 1170 if (adapter->mbox->m_in.busy) 1171 return __mega_busywait_mbox(adapter); 1172 return 0; 1173 } 1174 1175 /** 1176 * issue_scb_block() 1177 * @adapter - pointer to our soft state 1178 * @raw_mbox - the mailbox 1179 * 1180 * Issue a scb in synchronous and non-interrupt mode 1181 */ 1182 static int 1183 issue_scb_block(adapter_t *adapter, u_char *raw_mbox) 1184 { 1185 volatile mbox64_t *mbox64 = adapter->mbox64; 1186 volatile mbox_t *mbox = adapter->mbox; 1187 u8 byte; 1188 1189 /* Wait until mailbox is free */ 1190 if(mega_busywait_mbox (adapter)) 1191 goto bug_blocked_mailbox; 1192 1193 /* Copy mailbox data into host structure */ 1194 memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out)); 1195 mbox->m_out.cmdid = 0xFE; 1196 mbox->m_in.busy = 1; 1197 1198 switch (raw_mbox[0]) { 1199 case MEGA_MBOXCMD_LREAD64: 1200 case MEGA_MBOXCMD_LWRITE64: 1201 case MEGA_MBOXCMD_PASSTHRU64: 1202 case MEGA_MBOXCMD_EXTPTHRU: 1203 mbox64->xfer_segment_lo = mbox->m_out.xferaddr; 1204 mbox64->xfer_segment_hi = 0; 1205 mbox->m_out.xferaddr = 0xFFFFFFFF; 1206 break; 1207 default: 1208 mbox64->xfer_segment_lo = 0; 1209 mbox64->xfer_segment_hi = 0; 1210 } 1211 1212 if( likely(adapter->flag & BOARD_MEMMAP) ) { 1213 mbox->m_in.poll = 0; 1214 mbox->m_in.ack = 0; 1215 mbox->m_in.numstatus = 0xFF; 1216 mbox->m_in.status = 0xFF; 1217 WRINDOOR(adapter, adapter->mbox_dma | 0x1); 1218 1219 while((volatile u8)mbox->m_in.numstatus == 0xFF) 1220 cpu_relax(); 1221 1222 mbox->m_in.numstatus = 0xFF; 1223 1224 while( (volatile u8)mbox->m_in.poll != 0x77 ) 1225 cpu_relax(); 1226 1227 mbox->m_in.poll = 0; 1228 mbox->m_in.ack = 0x77; 1229 1230 WRINDOOR(adapter, adapter->mbox_dma | 0x2); 1231 1232 while(RDINDOOR(adapter) & 0x2) 1233 cpu_relax(); 1234 } 1235 else { 1236 irq_disable(adapter); 1237 issue_command(adapter); 1238 1239 while (!((byte = irq_state(adapter)) & INTR_VALID)) 1240 cpu_relax(); 1241 1242 set_irq_state(adapter, byte); 1243 irq_enable(adapter); 1244 irq_ack(adapter); 1245 } 1246 1247 return mbox->m_in.status; 1248 1249 bug_blocked_mailbox: 1250 printk(KERN_WARNING "megaraid: Blocked mailbox......!!\n"); 1251 udelay (1000); 1252 return -1; 1253 } 1254 1255 1256 /** 1257 * megaraid_isr_iomapped() 1258 * @irq - irq 1259 * @devp - pointer to our soft state 1260 * 1261 * Interrupt service routine for io-mapped controllers. 1262 * Find out if our device is interrupting. If yes, acknowledge the interrupt 1263 * and service the completed commands. 1264 */ 1265 static irqreturn_t 1266 megaraid_isr_iomapped(int irq, void *devp) 1267 { 1268 adapter_t *adapter = devp; 1269 unsigned long flags; 1270 u8 status; 1271 u8 nstatus; 1272 u8 completed[MAX_FIRMWARE_STATUS]; 1273 u8 byte; 1274 int handled = 0; 1275 1276 1277 /* 1278 * loop till F/W has more commands for us to complete. 1279 */ 1280 spin_lock_irqsave(&adapter->lock, flags); 1281 1282 do { 1283 /* Check if a valid interrupt is pending */ 1284 byte = irq_state(adapter); 1285 if( (byte & VALID_INTR_BYTE) == 0 ) { 1286 /* 1287 * No more pending commands 1288 */ 1289 goto out_unlock; 1290 } 1291 set_irq_state(adapter, byte); 1292 1293 while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus) 1294 == 0xFF) 1295 cpu_relax(); 1296 adapter->mbox->m_in.numstatus = 0xFF; 1297 1298 status = adapter->mbox->m_in.status; 1299 1300 /* 1301 * decrement the pending queue counter 1302 */ 1303 atomic_sub(nstatus, &adapter->pend_cmds); 1304 1305 memcpy(completed, (void *)adapter->mbox->m_in.completed, 1306 nstatus); 1307 1308 /* Acknowledge interrupt */ 1309 irq_ack(adapter); 1310 1311 mega_cmd_done(adapter, completed, nstatus, status); 1312 1313 mega_rundoneq(adapter); 1314 1315 handled = 1; 1316 1317 /* Loop through any pending requests */ 1318 if(atomic_read(&adapter->quiescent) == 0) { 1319 mega_runpendq(adapter); 1320 } 1321 1322 } while(1); 1323 1324 out_unlock: 1325 1326 spin_unlock_irqrestore(&adapter->lock, flags); 1327 1328 return IRQ_RETVAL(handled); 1329 } 1330 1331 1332 /** 1333 * megaraid_isr_memmapped() 1334 * @irq - irq 1335 * @devp - pointer to our soft state 1336 * 1337 * Interrupt service routine for memory-mapped controllers. 1338 * Find out if our device is interrupting. If yes, acknowledge the interrupt 1339 * and service the completed commands. 1340 */ 1341 static irqreturn_t 1342 megaraid_isr_memmapped(int irq, void *devp) 1343 { 1344 adapter_t *adapter = devp; 1345 unsigned long flags; 1346 u8 status; 1347 u32 dword = 0; 1348 u8 nstatus; 1349 u8 completed[MAX_FIRMWARE_STATUS]; 1350 int handled = 0; 1351 1352 1353 /* 1354 * loop till F/W has more commands for us to complete. 1355 */ 1356 spin_lock_irqsave(&adapter->lock, flags); 1357 1358 do { 1359 /* Check if a valid interrupt is pending */ 1360 dword = RDOUTDOOR(adapter); 1361 if(dword != 0x10001234) { 1362 /* 1363 * No more pending commands 1364 */ 1365 goto out_unlock; 1366 } 1367 WROUTDOOR(adapter, 0x10001234); 1368 1369 while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus) 1370 == 0xFF) { 1371 cpu_relax(); 1372 } 1373 adapter->mbox->m_in.numstatus = 0xFF; 1374 1375 status = adapter->mbox->m_in.status; 1376 1377 /* 1378 * decrement the pending queue counter 1379 */ 1380 atomic_sub(nstatus, &adapter->pend_cmds); 1381 1382 memcpy(completed, (void *)adapter->mbox->m_in.completed, 1383 nstatus); 1384 1385 /* Acknowledge interrupt */ 1386 WRINDOOR(adapter, 0x2); 1387 1388 handled = 1; 1389 1390 while( RDINDOOR(adapter) & 0x02 ) 1391 cpu_relax(); 1392 1393 mega_cmd_done(adapter, completed, nstatus, status); 1394 1395 mega_rundoneq(adapter); 1396 1397 /* Loop through any pending requests */ 1398 if(atomic_read(&adapter->quiescent) == 0) { 1399 mega_runpendq(adapter); 1400 } 1401 1402 } while(1); 1403 1404 out_unlock: 1405 1406 spin_unlock_irqrestore(&adapter->lock, flags); 1407 1408 return IRQ_RETVAL(handled); 1409 } 1410 /** 1411 * mega_cmd_done() 1412 * @adapter - pointer to our soft state 1413 * @completed - array of ids of completed commands 1414 * @nstatus - number of completed commands 1415 * @status - status of the last command completed 1416 * 1417 * Complete the commands and call the scsi mid-layer callback hooks. 1418 */ 1419 static void 1420 mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status) 1421 { 1422 mega_ext_passthru *epthru = NULL; 1423 struct scatterlist *sgl; 1424 Scsi_Cmnd *cmd = NULL; 1425 mega_passthru *pthru = NULL; 1426 mbox_t *mbox = NULL; 1427 u8 c; 1428 scb_t *scb; 1429 int islogical; 1430 int cmdid; 1431 int i; 1432 1433 /* 1434 * for all the commands completed, call the mid-layer callback routine 1435 * and free the scb. 1436 */ 1437 for( i = 0; i < nstatus; i++ ) { 1438 1439 cmdid = completed[i]; 1440 1441 if( cmdid == CMDID_INT_CMDS ) { /* internal command */ 1442 scb = &adapter->int_scb; 1443 cmd = scb->cmd; 1444 mbox = (mbox_t *)scb->raw_mbox; 1445 1446 /* 1447 * Internal command interface do not fire the extended 1448 * passthru or 64-bit passthru 1449 */ 1450 pthru = scb->pthru; 1451 1452 } 1453 else { 1454 scb = &adapter->scb_list[cmdid]; 1455 1456 /* 1457 * Make sure f/w has completed a valid command 1458 */ 1459 if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) { 1460 printk(KERN_CRIT 1461 "megaraid: invalid command "); 1462 printk("Id %d, scb->state:%x, scsi cmd:%p\n", 1463 cmdid, scb->state, scb->cmd); 1464 1465 continue; 1466 } 1467 1468 /* 1469 * Was a abort issued for this command 1470 */ 1471 if( scb->state & SCB_ABORT ) { 1472 1473 printk(KERN_WARNING 1474 "megaraid: aborted cmd [%x] complete.\n", 1475 scb->idx); 1476 1477 scb->cmd->result = (DID_ABORT << 16); 1478 1479 list_add_tail(SCSI_LIST(scb->cmd), 1480 &adapter->completed_list); 1481 1482 mega_free_scb(adapter, scb); 1483 1484 continue; 1485 } 1486 1487 /* 1488 * Was a reset issued for this command 1489 */ 1490 if( scb->state & SCB_RESET ) { 1491 1492 printk(KERN_WARNING 1493 "megaraid: reset cmd [%x] complete.\n", 1494 scb->idx); 1495 1496 scb->cmd->result = (DID_RESET << 16); 1497 1498 list_add_tail(SCSI_LIST(scb->cmd), 1499 &adapter->completed_list); 1500 1501 mega_free_scb (adapter, scb); 1502 1503 continue; 1504 } 1505 1506 cmd = scb->cmd; 1507 pthru = scb->pthru; 1508 epthru = scb->epthru; 1509 mbox = (mbox_t *)scb->raw_mbox; 1510 1511 #if MEGA_HAVE_STATS 1512 { 1513 1514 int logdrv = mbox->m_out.logdrv; 1515 1516 islogical = adapter->logdrv_chan[cmd->channel]; 1517 /* 1518 * Maintain an error counter for the logical drive. 1519 * Some application like SNMP agent need such 1520 * statistics 1521 */ 1522 if( status && islogical && (cmd->cmnd[0] == READ_6 || 1523 cmd->cmnd[0] == READ_10 || 1524 cmd->cmnd[0] == READ_12)) { 1525 /* 1526 * Logical drive number increases by 0x80 when 1527 * a logical drive is deleted 1528 */ 1529 adapter->rd_errors[logdrv%0x80]++; 1530 } 1531 1532 if( status && islogical && (cmd->cmnd[0] == WRITE_6 || 1533 cmd->cmnd[0] == WRITE_10 || 1534 cmd->cmnd[0] == WRITE_12)) { 1535 /* 1536 * Logical drive number increases by 0x80 when 1537 * a logical drive is deleted 1538 */ 1539 adapter->wr_errors[logdrv%0x80]++; 1540 } 1541 1542 } 1543 #endif 1544 } 1545 1546 /* 1547 * Do not return the presence of hard disk on the channel so, 1548 * inquiry sent, and returned data==hard disk or removable 1549 * hard disk and not logical, request should return failure! - 1550 * PJ 1551 */ 1552 islogical = adapter->logdrv_chan[cmd->device->channel]; 1553 if( cmd->cmnd[0] == INQUIRY && !islogical ) { 1554 1555 sgl = scsi_sglist(cmd); 1556 if( sg_page(sgl) ) { 1557 c = *(unsigned char *) sg_virt(&sgl[0]); 1558 } else { 1559 printk(KERN_WARNING 1560 "megaraid: invalid sg.\n"); 1561 c = 0; 1562 } 1563 1564 if(IS_RAID_CH(adapter, cmd->device->channel) && 1565 ((c & 0x1F ) == TYPE_DISK)) { 1566 status = 0xF0; 1567 } 1568 } 1569 1570 /* clear result; otherwise, success returns corrupt value */ 1571 cmd->result = 0; 1572 1573 /* Convert MegaRAID status to Linux error code */ 1574 switch (status) { 1575 case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */ 1576 cmd->result |= (DID_OK << 16); 1577 break; 1578 1579 case 0x02: /* ERROR_ABORTED, i.e. 1580 SCSI_STATUS_CHECK_CONDITION */ 1581 1582 /* set sense_buffer and result fields */ 1583 if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU || 1584 mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) { 1585 1586 memcpy(cmd->sense_buffer, pthru->reqsensearea, 1587 14); 1588 1589 cmd->result = (DRIVER_SENSE << 24) | 1590 (DID_OK << 16) | 1591 (CHECK_CONDITION << 1); 1592 } 1593 else { 1594 if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) { 1595 1596 memcpy(cmd->sense_buffer, 1597 epthru->reqsensearea, 14); 1598 1599 cmd->result = (DRIVER_SENSE << 24) | 1600 (DID_OK << 16) | 1601 (CHECK_CONDITION << 1); 1602 } else { 1603 cmd->sense_buffer[0] = 0x70; 1604 cmd->sense_buffer[2] = ABORTED_COMMAND; 1605 cmd->result |= (CHECK_CONDITION << 1); 1606 } 1607 } 1608 break; 1609 1610 case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e. 1611 SCSI_STATUS_BUSY */ 1612 cmd->result |= (DID_BUS_BUSY << 16) | status; 1613 break; 1614 1615 default: 1616 #if MEGA_HAVE_CLUSTERING 1617 /* 1618 * If TEST_UNIT_READY fails, we know 1619 * MEGA_RESERVATION_STATUS failed 1620 */ 1621 if( cmd->cmnd[0] == TEST_UNIT_READY ) { 1622 cmd->result |= (DID_ERROR << 16) | 1623 (RESERVATION_CONFLICT << 1); 1624 } 1625 else 1626 /* 1627 * Error code returned is 1 if Reserve or Release 1628 * failed or the input parameter is invalid 1629 */ 1630 if( status == 1 && 1631 (cmd->cmnd[0] == RESERVE || 1632 cmd->cmnd[0] == RELEASE) ) { 1633 1634 cmd->result |= (DID_ERROR << 16) | 1635 (RESERVATION_CONFLICT << 1); 1636 } 1637 else 1638 #endif 1639 cmd->result |= (DID_BAD_TARGET << 16)|status; 1640 } 1641 1642 /* 1643 * Only free SCBs for the commands coming down from the 1644 * mid-layer, not for which were issued internally 1645 * 1646 * For internal command, restore the status returned by the 1647 * firmware so that user can interpret it. 1648 */ 1649 if( cmdid == CMDID_INT_CMDS ) { /* internal command */ 1650 cmd->result = status; 1651 1652 /* 1653 * Remove the internal command from the pending list 1654 */ 1655 list_del_init(&scb->list); 1656 scb->state = SCB_FREE; 1657 } 1658 else { 1659 mega_free_scb(adapter, scb); 1660 } 1661 1662 /* Add Scsi_Command to end of completed queue */ 1663 list_add_tail(SCSI_LIST(cmd), &adapter->completed_list); 1664 } 1665 } 1666 1667 1668 /* 1669 * mega_runpendq() 1670 * 1671 * Run through the list of completed requests and finish it 1672 */ 1673 static void 1674 mega_rundoneq (adapter_t *adapter) 1675 { 1676 Scsi_Cmnd *cmd; 1677 struct list_head *pos; 1678 1679 list_for_each(pos, &adapter->completed_list) { 1680 1681 struct scsi_pointer* spos = (struct scsi_pointer *)pos; 1682 1683 cmd = list_entry(spos, Scsi_Cmnd, SCp); 1684 cmd->scsi_done(cmd); 1685 } 1686 1687 INIT_LIST_HEAD(&adapter->completed_list); 1688 } 1689 1690 1691 /* 1692 * Free a SCB structure 1693 * Note: We assume the scsi commands associated with this scb is not free yet. 1694 */ 1695 static void 1696 mega_free_scb(adapter_t *adapter, scb_t *scb) 1697 { 1698 switch( scb->dma_type ) { 1699 1700 case MEGA_DMA_TYPE_NONE: 1701 break; 1702 1703 case MEGA_SGLIST: 1704 scsi_dma_unmap(scb->cmd); 1705 break; 1706 default: 1707 break; 1708 } 1709 1710 /* 1711 * Remove from the pending list 1712 */ 1713 list_del_init(&scb->list); 1714 1715 /* Link the scb back into free list */ 1716 scb->state = SCB_FREE; 1717 scb->cmd = NULL; 1718 1719 list_add(&scb->list, &adapter->free_list); 1720 } 1721 1722 1723 static int 1724 __mega_busywait_mbox (adapter_t *adapter) 1725 { 1726 volatile mbox_t *mbox = adapter->mbox; 1727 long counter; 1728 1729 for (counter = 0; counter < 10000; counter++) { 1730 if (!mbox->m_in.busy) 1731 return 0; 1732 udelay(100); 1733 cond_resched(); 1734 } 1735 return -1; /* give up after 1 second */ 1736 } 1737 1738 /* 1739 * Copies data to SGLIST 1740 * Note: For 64 bit cards, we need a minimum of one SG element for read/write 1741 */ 1742 static int 1743 mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len) 1744 { 1745 struct scatterlist *sg; 1746 Scsi_Cmnd *cmd; 1747 int sgcnt; 1748 int idx; 1749 1750 cmd = scb->cmd; 1751 1752 /* 1753 * Copy Scatter-Gather list info into controller structure. 1754 * 1755 * The number of sg elements returned must not exceed our limit 1756 */ 1757 sgcnt = scsi_dma_map(cmd); 1758 1759 scb->dma_type = MEGA_SGLIST; 1760 1761 BUG_ON(sgcnt > adapter->sglen || sgcnt < 0); 1762 1763 *len = 0; 1764 1765 if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) { 1766 sg = scsi_sglist(cmd); 1767 scb->dma_h_bulkdata = sg_dma_address(sg); 1768 *buf = (u32)scb->dma_h_bulkdata; 1769 *len = sg_dma_len(sg); 1770 return 0; 1771 } 1772 1773 scsi_for_each_sg(cmd, sg, sgcnt, idx) { 1774 if (adapter->has_64bit_addr) { 1775 scb->sgl64[idx].address = sg_dma_address(sg); 1776 *len += scb->sgl64[idx].length = sg_dma_len(sg); 1777 } else { 1778 scb->sgl[idx].address = sg_dma_address(sg); 1779 *len += scb->sgl[idx].length = sg_dma_len(sg); 1780 } 1781 } 1782 1783 /* Reset pointer and length fields */ 1784 *buf = scb->sgl_dma_addr; 1785 1786 /* Return count of SG requests */ 1787 return sgcnt; 1788 } 1789 1790 1791 /* 1792 * mega_8_to_40ld() 1793 * 1794 * takes all info in AdapterInquiry structure and puts it into ProductInfo and 1795 * Enquiry3 structures for later use 1796 */ 1797 static void 1798 mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3, 1799 mega_product_info *product_info) 1800 { 1801 int i; 1802 1803 product_info->max_commands = inquiry->adapter_info.max_commands; 1804 enquiry3->rebuild_rate = inquiry->adapter_info.rebuild_rate; 1805 product_info->nchannels = inquiry->adapter_info.nchannels; 1806 1807 for (i = 0; i < 4; i++) { 1808 product_info->fw_version[i] = 1809 inquiry->adapter_info.fw_version[i]; 1810 1811 product_info->bios_version[i] = 1812 inquiry->adapter_info.bios_version[i]; 1813 } 1814 enquiry3->cache_flush_interval = 1815 inquiry->adapter_info.cache_flush_interval; 1816 1817 product_info->dram_size = inquiry->adapter_info.dram_size; 1818 1819 enquiry3->num_ldrv = inquiry->logdrv_info.num_ldrv; 1820 1821 for (i = 0; i < MAX_LOGICAL_DRIVES_8LD; i++) { 1822 enquiry3->ldrv_size[i] = inquiry->logdrv_info.ldrv_size[i]; 1823 enquiry3->ldrv_prop[i] = inquiry->logdrv_info.ldrv_prop[i]; 1824 enquiry3->ldrv_state[i] = inquiry->logdrv_info.ldrv_state[i]; 1825 } 1826 1827 for (i = 0; i < (MAX_PHYSICAL_DRIVES); i++) 1828 enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i]; 1829 } 1830 1831 static inline void 1832 mega_free_sgl(adapter_t *adapter) 1833 { 1834 scb_t *scb; 1835 int i; 1836 1837 for(i = 0; i < adapter->max_cmds; i++) { 1838 1839 scb = &adapter->scb_list[i]; 1840 1841 if( scb->sgl64 ) { 1842 pci_free_consistent(adapter->dev, 1843 sizeof(mega_sgl64) * adapter->sglen, 1844 scb->sgl64, 1845 scb->sgl_dma_addr); 1846 1847 scb->sgl64 = NULL; 1848 } 1849 1850 if( scb->pthru ) { 1851 pci_free_consistent(adapter->dev, sizeof(mega_passthru), 1852 scb->pthru, scb->pthru_dma_addr); 1853 1854 scb->pthru = NULL; 1855 } 1856 1857 if( scb->epthru ) { 1858 pci_free_consistent(adapter->dev, 1859 sizeof(mega_ext_passthru), 1860 scb->epthru, scb->epthru_dma_addr); 1861 1862 scb->epthru = NULL; 1863 } 1864 1865 } 1866 } 1867 1868 1869 /* 1870 * Get information about the card/driver 1871 */ 1872 const char * 1873 megaraid_info(struct Scsi_Host *host) 1874 { 1875 static char buffer[512]; 1876 adapter_t *adapter; 1877 1878 adapter = (adapter_t *)host->hostdata; 1879 1880 sprintf (buffer, 1881 "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns", 1882 adapter->fw_version, adapter->product_info.max_commands, 1883 adapter->host->max_id, adapter->host->max_channel, 1884 adapter->host->max_lun); 1885 return buffer; 1886 } 1887 1888 /* 1889 * Abort a previous SCSI request. Only commands on the pending list can be 1890 * aborted. All the commands issued to the F/W must complete. 1891 */ 1892 static int 1893 megaraid_abort(Scsi_Cmnd *cmd) 1894 { 1895 adapter_t *adapter; 1896 int rval; 1897 1898 adapter = (adapter_t *)cmd->device->host->hostdata; 1899 1900 rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT); 1901 1902 /* 1903 * This is required here to complete any completed requests 1904 * to be communicated over to the mid layer. 1905 */ 1906 mega_rundoneq(adapter); 1907 1908 return rval; 1909 } 1910 1911 1912 static int 1913 megaraid_reset(struct scsi_cmnd *cmd) 1914 { 1915 adapter_t *adapter; 1916 megacmd_t mc; 1917 int rval; 1918 1919 adapter = (adapter_t *)cmd->device->host->hostdata; 1920 1921 #if MEGA_HAVE_CLUSTERING 1922 mc.cmd = MEGA_CLUSTER_CMD; 1923 mc.opcode = MEGA_RESET_RESERVATIONS; 1924 1925 if( mega_internal_command(adapter, &mc, NULL) != 0 ) { 1926 printk(KERN_WARNING 1927 "megaraid: reservation reset failed.\n"); 1928 } 1929 else { 1930 printk(KERN_INFO "megaraid: reservation reset.\n"); 1931 } 1932 #endif 1933 1934 spin_lock_irq(&adapter->lock); 1935 1936 rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET); 1937 1938 /* 1939 * This is required here to complete any completed requests 1940 * to be communicated over to the mid layer. 1941 */ 1942 mega_rundoneq(adapter); 1943 spin_unlock_irq(&adapter->lock); 1944 1945 return rval; 1946 } 1947 1948 /** 1949 * megaraid_abort_and_reset() 1950 * @adapter - megaraid soft state 1951 * @cmd - scsi command to be aborted or reset 1952 * @aor - abort or reset flag 1953 * 1954 * Try to locate the scsi command in the pending queue. If found and is not 1955 * issued to the controller, abort/reset it. Otherwise return failure 1956 */ 1957 static int 1958 megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor) 1959 { 1960 struct list_head *pos, *next; 1961 scb_t *scb; 1962 1963 printk(KERN_WARNING "megaraid: %s cmd=%x <c=%d t=%d l=%d>\n", 1964 (aor == SCB_ABORT)? "ABORTING":"RESET", 1965 cmd->cmnd[0], cmd->device->channel, 1966 cmd->device->id, cmd->device->lun); 1967 1968 if(list_empty(&adapter->pending_list)) 1969 return FALSE; 1970 1971 list_for_each_safe(pos, next, &adapter->pending_list) { 1972 1973 scb = list_entry(pos, scb_t, list); 1974 1975 if (scb->cmd == cmd) { /* Found command */ 1976 1977 scb->state |= aor; 1978 1979 /* 1980 * Check if this command has firmware ownership. If 1981 * yes, we cannot reset this command. Whenever f/w 1982 * completes this command, we will return appropriate 1983 * status from ISR. 1984 */ 1985 if( scb->state & SCB_ISSUED ) { 1986 1987 printk(KERN_WARNING 1988 "megaraid: %s[%x], fw owner.\n", 1989 (aor==SCB_ABORT) ? "ABORTING":"RESET", 1990 scb->idx); 1991 1992 return FALSE; 1993 } 1994 else { 1995 1996 /* 1997 * Not yet issued! Remove from the pending 1998 * list 1999 */ 2000 printk(KERN_WARNING 2001 "megaraid: %s-[%x], driver owner.\n", 2002 (aor==SCB_ABORT) ? "ABORTING":"RESET", 2003 scb->idx); 2004 2005 mega_free_scb(adapter, scb); 2006 2007 if( aor == SCB_ABORT ) { 2008 cmd->result = (DID_ABORT << 16); 2009 } 2010 else { 2011 cmd->result = (DID_RESET << 16); 2012 } 2013 2014 list_add_tail(SCSI_LIST(cmd), 2015 &adapter->completed_list); 2016 2017 return TRUE; 2018 } 2019 } 2020 } 2021 2022 return FALSE; 2023 } 2024 2025 static inline int 2026 make_local_pdev(adapter_t *adapter, struct pci_dev **pdev) 2027 { 2028 *pdev = alloc_pci_dev(); 2029 2030 if( *pdev == NULL ) return -1; 2031 2032 memcpy(*pdev, adapter->dev, sizeof(struct pci_dev)); 2033 2034 if( pci_set_dma_mask(*pdev, DMA_BIT_MASK(32)) != 0 ) { 2035 kfree(*pdev); 2036 return -1; 2037 } 2038 2039 return 0; 2040 } 2041 2042 static inline void 2043 free_local_pdev(struct pci_dev *pdev) 2044 { 2045 kfree(pdev); 2046 } 2047 2048 /** 2049 * mega_allocate_inquiry() 2050 * @dma_handle - handle returned for dma address 2051 * @pdev - handle to pci device 2052 * 2053 * allocates memory for inquiry structure 2054 */ 2055 static inline void * 2056 mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev) 2057 { 2058 return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle); 2059 } 2060 2061 2062 static inline void 2063 mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev) 2064 { 2065 pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle); 2066 } 2067 2068 2069 #ifdef CONFIG_PROC_FS 2070 /* Following code handles /proc fs */ 2071 2072 #define CREATE_READ_PROC(string, func) create_proc_read_entry(string, \ 2073 S_IRUSR | S_IFREG, \ 2074 controller_proc_dir_entry, \ 2075 func, adapter) 2076 2077 /** 2078 * mega_create_proc_entry() 2079 * @index - index in soft state array 2080 * @parent - parent node for this /proc entry 2081 * 2082 * Creates /proc entries for our controllers. 2083 */ 2084 static void 2085 mega_create_proc_entry(int index, struct proc_dir_entry *parent) 2086 { 2087 struct proc_dir_entry *controller_proc_dir_entry = NULL; 2088 u8 string[64] = { 0 }; 2089 adapter_t *adapter = hba_soft_state[index]; 2090 2091 sprintf(string, "hba%d", adapter->host->host_no); 2092 2093 controller_proc_dir_entry = 2094 adapter->controller_proc_dir_entry = proc_mkdir(string, parent); 2095 2096 if(!controller_proc_dir_entry) { 2097 printk(KERN_WARNING "\nmegaraid: proc_mkdir failed\n"); 2098 return; 2099 } 2100 adapter->proc_read = CREATE_READ_PROC("config", proc_read_config); 2101 adapter->proc_stat = CREATE_READ_PROC("stat", proc_read_stat); 2102 adapter->proc_mbox = CREATE_READ_PROC("mailbox", proc_read_mbox); 2103 #if MEGA_HAVE_ENH_PROC 2104 adapter->proc_rr = CREATE_READ_PROC("rebuild-rate", proc_rebuild_rate); 2105 adapter->proc_battery = CREATE_READ_PROC("battery-status", 2106 proc_battery); 2107 2108 /* 2109 * Display each physical drive on its channel 2110 */ 2111 adapter->proc_pdrvstat[0] = CREATE_READ_PROC("diskdrives-ch0", 2112 proc_pdrv_ch0); 2113 adapter->proc_pdrvstat[1] = CREATE_READ_PROC("diskdrives-ch1", 2114 proc_pdrv_ch1); 2115 adapter->proc_pdrvstat[2] = CREATE_READ_PROC("diskdrives-ch2", 2116 proc_pdrv_ch2); 2117 adapter->proc_pdrvstat[3] = CREATE_READ_PROC("diskdrives-ch3", 2118 proc_pdrv_ch3); 2119 2120 /* 2121 * Display a set of up to 10 logical drive through each of following 2122 * /proc entries 2123 */ 2124 adapter->proc_rdrvstat[0] = CREATE_READ_PROC("raiddrives-0-9", 2125 proc_rdrv_10); 2126 adapter->proc_rdrvstat[1] = CREATE_READ_PROC("raiddrives-10-19", 2127 proc_rdrv_20); 2128 adapter->proc_rdrvstat[2] = CREATE_READ_PROC("raiddrives-20-29", 2129 proc_rdrv_30); 2130 adapter->proc_rdrvstat[3] = CREATE_READ_PROC("raiddrives-30-39", 2131 proc_rdrv_40); 2132 #endif 2133 } 2134 2135 2136 /** 2137 * proc_read_config() 2138 * @page - buffer to write the data in 2139 * @start - where the actual data has been written in page 2140 * @offset - same meaning as the read system call 2141 * @count - same meaning as the read system call 2142 * @eof - set if no more data needs to be returned 2143 * @data - pointer to our soft state 2144 * 2145 * Display configuration information about the controller. 2146 */ 2147 static int 2148 proc_read_config(char *page, char **start, off_t offset, int count, int *eof, 2149 void *data) 2150 { 2151 2152 adapter_t *adapter = (adapter_t *)data; 2153 int len = 0; 2154 2155 len += sprintf(page+len, "%s", MEGARAID_VERSION); 2156 2157 if(adapter->product_info.product_name[0]) 2158 len += sprintf(page+len, "%s\n", 2159 adapter->product_info.product_name); 2160 2161 len += sprintf(page+len, "Controller Type: "); 2162 2163 if( adapter->flag & BOARD_MEMMAP ) { 2164 len += sprintf(page+len, 2165 "438/466/467/471/493/518/520/531/532\n"); 2166 } 2167 else { 2168 len += sprintf(page+len, 2169 "418/428/434\n"); 2170 } 2171 2172 if(adapter->flag & BOARD_40LD) { 2173 len += sprintf(page+len, 2174 "Controller Supports 40 Logical Drives\n"); 2175 } 2176 2177 if(adapter->flag & BOARD_64BIT) { 2178 len += sprintf(page+len, 2179 "Controller capable of 64-bit memory addressing\n"); 2180 } 2181 if( adapter->has_64bit_addr ) { 2182 len += sprintf(page+len, 2183 "Controller using 64-bit memory addressing\n"); 2184 } 2185 else { 2186 len += sprintf(page+len, 2187 "Controller is not using 64-bit memory addressing\n"); 2188 } 2189 2190 len += sprintf(page+len, "Base = %08lx, Irq = %d, ", adapter->base, 2191 adapter->host->irq); 2192 2193 len += sprintf(page+len, "Logical Drives = %d, Channels = %d\n", 2194 adapter->numldrv, adapter->product_info.nchannels); 2195 2196 len += sprintf(page+len, "Version =%s:%s, DRAM = %dMb\n", 2197 adapter->fw_version, adapter->bios_version, 2198 adapter->product_info.dram_size); 2199 2200 len += sprintf(page+len, 2201 "Controller Queue Depth = %d, Driver Queue Depth = %d\n", 2202 adapter->product_info.max_commands, adapter->max_cmds); 2203 2204 len += sprintf(page+len, "support_ext_cdb = %d\n", 2205 adapter->support_ext_cdb); 2206 len += sprintf(page+len, "support_random_del = %d\n", 2207 adapter->support_random_del); 2208 len += sprintf(page+len, "boot_ldrv_enabled = %d\n", 2209 adapter->boot_ldrv_enabled); 2210 len += sprintf(page+len, "boot_ldrv = %d\n", 2211 adapter->boot_ldrv); 2212 len += sprintf(page+len, "boot_pdrv_enabled = %d\n", 2213 adapter->boot_pdrv_enabled); 2214 len += sprintf(page+len, "boot_pdrv_ch = %d\n", 2215 adapter->boot_pdrv_ch); 2216 len += sprintf(page+len, "boot_pdrv_tgt = %d\n", 2217 adapter->boot_pdrv_tgt); 2218 len += sprintf(page+len, "quiescent = %d\n", 2219 atomic_read(&adapter->quiescent)); 2220 len += sprintf(page+len, "has_cluster = %d\n", 2221 adapter->has_cluster); 2222 2223 len += sprintf(page+len, "\nModule Parameters:\n"); 2224 len += sprintf(page+len, "max_cmd_per_lun = %d\n", 2225 max_cmd_per_lun); 2226 len += sprintf(page+len, "max_sectors_per_io = %d\n", 2227 max_sectors_per_io); 2228 2229 *eof = 1; 2230 2231 return len; 2232 } 2233 2234 2235 2236 /** 2237 * proc_read_stat() 2238 * @page - buffer to write the data in 2239 * @start - where the actual data has been written in page 2240 * @offset - same meaning as the read system call 2241 * @count - same meaning as the read system call 2242 * @eof - set if no more data needs to be returned 2243 * @data - pointer to our soft state 2244 * 2245 * Diaplay statistical information about the I/O activity. 2246 */ 2247 static int 2248 proc_read_stat(char *page, char **start, off_t offset, int count, int *eof, 2249 void *data) 2250 { 2251 adapter_t *adapter; 2252 int len; 2253 int i; 2254 2255 i = 0; /* avoid compilation warnings */ 2256 len = 0; 2257 adapter = (adapter_t *)data; 2258 2259 len = sprintf(page, "Statistical Information for this controller\n"); 2260 len += sprintf(page+len, "pend_cmds = %d\n", 2261 atomic_read(&adapter->pend_cmds)); 2262 #if MEGA_HAVE_STATS 2263 for(i = 0; i < adapter->numldrv; i++) { 2264 len += sprintf(page+len, "Logical Drive %d:\n", i); 2265 2266 len += sprintf(page+len, 2267 "\tReads Issued = %lu, Writes Issued = %lu\n", 2268 adapter->nreads[i], adapter->nwrites[i]); 2269 2270 len += sprintf(page+len, 2271 "\tSectors Read = %lu, Sectors Written = %lu\n", 2272 adapter->nreadblocks[i], adapter->nwriteblocks[i]); 2273 2274 len += sprintf(page+len, 2275 "\tRead errors = %lu, Write errors = %lu\n\n", 2276 adapter->rd_errors[i], adapter->wr_errors[i]); 2277 } 2278 #else 2279 len += sprintf(page+len, 2280 "IO and error counters not compiled in driver.\n"); 2281 #endif 2282 2283 *eof = 1; 2284 2285 return len; 2286 } 2287 2288 2289 /** 2290 * proc_read_mbox() 2291 * @page - buffer to write the data in 2292 * @start - where the actual data has been written in page 2293 * @offset - same meaning as the read system call 2294 * @count - same meaning as the read system call 2295 * @eof - set if no more data needs to be returned 2296 * @data - pointer to our soft state 2297 * 2298 * Display mailbox information for the last command issued. This information 2299 * is good for debugging. 2300 */ 2301 static int 2302 proc_read_mbox(char *page, char **start, off_t offset, int count, int *eof, 2303 void *data) 2304 { 2305 2306 adapter_t *adapter = (adapter_t *)data; 2307 volatile mbox_t *mbox = adapter->mbox; 2308 int len = 0; 2309 2310 len = sprintf(page, "Contents of Mail Box Structure\n"); 2311 len += sprintf(page+len, " Fw Command = 0x%02x\n", 2312 mbox->m_out.cmd); 2313 len += sprintf(page+len, " Cmd Sequence = 0x%02x\n", 2314 mbox->m_out.cmdid); 2315 len += sprintf(page+len, " No of Sectors= %04d\n", 2316 mbox->m_out.numsectors); 2317 len += sprintf(page+len, " LBA = 0x%02x\n", 2318 mbox->m_out.lba); 2319 len += sprintf(page+len, " DTA = 0x%08x\n", 2320 mbox->m_out.xferaddr); 2321 len += sprintf(page+len, " Logical Drive= 0x%02x\n", 2322 mbox->m_out.logdrv); 2323 len += sprintf(page+len, " No of SG Elmt= 0x%02x\n", 2324 mbox->m_out.numsgelements); 2325 len += sprintf(page+len, " Busy = %01x\n", 2326 mbox->m_in.busy); 2327 len += sprintf(page+len, " Status = 0x%02x\n", 2328 mbox->m_in.status); 2329 2330 *eof = 1; 2331 2332 return len; 2333 } 2334 2335 2336 /** 2337 * proc_rebuild_rate() 2338 * @page - buffer to write the data in 2339 * @start - where the actual data has been written in page 2340 * @offset - same meaning as the read system call 2341 * @count - same meaning as the read system call 2342 * @eof - set if no more data needs to be returned 2343 * @data - pointer to our soft state 2344 * 2345 * Display current rebuild rate 2346 */ 2347 static int 2348 proc_rebuild_rate(char *page, char **start, off_t offset, int count, int *eof, 2349 void *data) 2350 { 2351 adapter_t *adapter = (adapter_t *)data; 2352 dma_addr_t dma_handle; 2353 caddr_t inquiry; 2354 struct pci_dev *pdev; 2355 int len = 0; 2356 2357 if( make_local_pdev(adapter, &pdev) != 0 ) { 2358 *eof = 1; 2359 return len; 2360 } 2361 2362 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) { 2363 free_local_pdev(pdev); 2364 *eof = 1; 2365 return len; 2366 } 2367 2368 if( mega_adapinq(adapter, dma_handle) != 0 ) { 2369 2370 len = sprintf(page, "Adapter inquiry failed.\n"); 2371 2372 printk(KERN_WARNING "megaraid: inquiry failed.\n"); 2373 2374 mega_free_inquiry(inquiry, dma_handle, pdev); 2375 2376 free_local_pdev(pdev); 2377 2378 *eof = 1; 2379 2380 return len; 2381 } 2382 2383 if( adapter->flag & BOARD_40LD ) { 2384 len = sprintf(page, "Rebuild Rate: [%d%%]\n", 2385 ((mega_inquiry3 *)inquiry)->rebuild_rate); 2386 } 2387 else { 2388 len = sprintf(page, "Rebuild Rate: [%d%%]\n", 2389 ((mraid_ext_inquiry *) 2390 inquiry)->raid_inq.adapter_info.rebuild_rate); 2391 } 2392 2393 2394 mega_free_inquiry(inquiry, dma_handle, pdev); 2395 2396 free_local_pdev(pdev); 2397 2398 *eof = 1; 2399 2400 return len; 2401 } 2402 2403 2404 /** 2405 * proc_battery() 2406 * @page - buffer to write the data in 2407 * @start - where the actual data has been written in page 2408 * @offset - same meaning as the read system call 2409 * @count - same meaning as the read system call 2410 * @eof - set if no more data needs to be returned 2411 * @data - pointer to our soft state 2412 * 2413 * Display information about the battery module on the controller. 2414 */ 2415 static int 2416 proc_battery(char *page, char **start, off_t offset, int count, int *eof, 2417 void *data) 2418 { 2419 adapter_t *adapter = (adapter_t *)data; 2420 dma_addr_t dma_handle; 2421 caddr_t inquiry; 2422 struct pci_dev *pdev; 2423 u8 battery_status = 0; 2424 char str[256]; 2425 int len = 0; 2426 2427 if( make_local_pdev(adapter, &pdev) != 0 ) { 2428 *eof = 1; 2429 return len; 2430 } 2431 2432 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) { 2433 free_local_pdev(pdev); 2434 *eof = 1; 2435 return len; 2436 } 2437 2438 if( mega_adapinq(adapter, dma_handle) != 0 ) { 2439 2440 len = sprintf(page, "Adapter inquiry failed.\n"); 2441 2442 printk(KERN_WARNING "megaraid: inquiry failed.\n"); 2443 2444 mega_free_inquiry(inquiry, dma_handle, pdev); 2445 2446 free_local_pdev(pdev); 2447 2448 *eof = 1; 2449 2450 return len; 2451 } 2452 2453 if( adapter->flag & BOARD_40LD ) { 2454 battery_status = ((mega_inquiry3 *)inquiry)->battery_status; 2455 } 2456 else { 2457 battery_status = ((mraid_ext_inquiry *)inquiry)-> 2458 raid_inq.adapter_info.battery_status; 2459 } 2460 2461 /* 2462 * Decode the battery status 2463 */ 2464 sprintf(str, "Battery Status:[%d]", battery_status); 2465 2466 if(battery_status == MEGA_BATT_CHARGE_DONE) 2467 strcat(str, " Charge Done"); 2468 2469 if(battery_status & MEGA_BATT_MODULE_MISSING) 2470 strcat(str, " Module Missing"); 2471 2472 if(battery_status & MEGA_BATT_LOW_VOLTAGE) 2473 strcat(str, " Low Voltage"); 2474 2475 if(battery_status & MEGA_BATT_TEMP_HIGH) 2476 strcat(str, " Temperature High"); 2477 2478 if(battery_status & MEGA_BATT_PACK_MISSING) 2479 strcat(str, " Pack Missing"); 2480 2481 if(battery_status & MEGA_BATT_CHARGE_INPROG) 2482 strcat(str, " Charge In-progress"); 2483 2484 if(battery_status & MEGA_BATT_CHARGE_FAIL) 2485 strcat(str, " Charge Fail"); 2486 2487 if(battery_status & MEGA_BATT_CYCLES_EXCEEDED) 2488 strcat(str, " Cycles Exceeded"); 2489 2490 len = sprintf(page, "%s\n", str); 2491 2492 2493 mega_free_inquiry(inquiry, dma_handle, pdev); 2494 2495 free_local_pdev(pdev); 2496 2497 *eof = 1; 2498 2499 return len; 2500 } 2501 2502 2503 /** 2504 * proc_pdrv_ch0() 2505 * @page - buffer to write the data in 2506 * @start - where the actual data has been written in page 2507 * @offset - same meaning as the read system call 2508 * @count - same meaning as the read system call 2509 * @eof - set if no more data needs to be returned 2510 * @data - pointer to our soft state 2511 * 2512 * Display information about the physical drives on physical channel 0. 2513 */ 2514 static int 2515 proc_pdrv_ch0(char *page, char **start, off_t offset, int count, int *eof, 2516 void *data) 2517 { 2518 adapter_t *adapter = (adapter_t *)data; 2519 2520 *eof = 1; 2521 2522 return (proc_pdrv(adapter, page, 0)); 2523 } 2524 2525 2526 /** 2527 * proc_pdrv_ch1() 2528 * @page - buffer to write the data in 2529 * @start - where the actual data has been written in page 2530 * @offset - same meaning as the read system call 2531 * @count - same meaning as the read system call 2532 * @eof - set if no more data needs to be returned 2533 * @data - pointer to our soft state 2534 * 2535 * Display information about the physical drives on physical channel 1. 2536 */ 2537 static int 2538 proc_pdrv_ch1(char *page, char **start, off_t offset, int count, int *eof, 2539 void *data) 2540 { 2541 adapter_t *adapter = (adapter_t *)data; 2542 2543 *eof = 1; 2544 2545 return (proc_pdrv(adapter, page, 1)); 2546 } 2547 2548 2549 /** 2550 * proc_pdrv_ch2() 2551 * @page - buffer to write the data in 2552 * @start - where the actual data has been written in page 2553 * @offset - same meaning as the read system call 2554 * @count - same meaning as the read system call 2555 * @eof - set if no more data needs to be returned 2556 * @data - pointer to our soft state 2557 * 2558 * Display information about the physical drives on physical channel 2. 2559 */ 2560 static int 2561 proc_pdrv_ch2(char *page, char **start, off_t offset, int count, int *eof, 2562 void *data) 2563 { 2564 adapter_t *adapter = (adapter_t *)data; 2565 2566 *eof = 1; 2567 2568 return (proc_pdrv(adapter, page, 2)); 2569 } 2570 2571 2572 /** 2573 * proc_pdrv_ch3() 2574 * @page - buffer to write the data in 2575 * @start - where the actual data has been written in page 2576 * @offset - same meaning as the read system call 2577 * @count - same meaning as the read system call 2578 * @eof - set if no more data needs to be returned 2579 * @data - pointer to our soft state 2580 * 2581 * Display information about the physical drives on physical channel 3. 2582 */ 2583 static int 2584 proc_pdrv_ch3(char *page, char **start, off_t offset, int count, int *eof, 2585 void *data) 2586 { 2587 adapter_t *adapter = (adapter_t *)data; 2588 2589 *eof = 1; 2590 2591 return (proc_pdrv(adapter, page, 3)); 2592 } 2593 2594 2595 /** 2596 * proc_pdrv() 2597 * @page - buffer to write the data in 2598 * @adapter - pointer to our soft state 2599 * 2600 * Display information about the physical drives. 2601 */ 2602 static int 2603 proc_pdrv(adapter_t *adapter, char *page, int channel) 2604 { 2605 dma_addr_t dma_handle; 2606 char *scsi_inq; 2607 dma_addr_t scsi_inq_dma_handle; 2608 caddr_t inquiry; 2609 struct pci_dev *pdev; 2610 u8 *pdrv_state; 2611 u8 state; 2612 int tgt; 2613 int max_channels; 2614 int len = 0; 2615 char str[80]; 2616 int i; 2617 2618 if( make_local_pdev(adapter, &pdev) != 0 ) { 2619 return len; 2620 } 2621 2622 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) { 2623 goto free_pdev; 2624 } 2625 2626 if( mega_adapinq(adapter, dma_handle) != 0 ) { 2627 len = sprintf(page, "Adapter inquiry failed.\n"); 2628 2629 printk(KERN_WARNING "megaraid: inquiry failed.\n"); 2630 2631 goto free_inquiry; 2632 } 2633 2634 2635 scsi_inq = pci_alloc_consistent(pdev, 256, &scsi_inq_dma_handle); 2636 2637 if( scsi_inq == NULL ) { 2638 len = sprintf(page, "memory not available for scsi inq.\n"); 2639 2640 goto free_inquiry; 2641 } 2642 2643 if( adapter->flag & BOARD_40LD ) { 2644 pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state; 2645 } 2646 else { 2647 pdrv_state = ((mraid_ext_inquiry *)inquiry)-> 2648 raid_inq.pdrv_info.pdrv_state; 2649 } 2650 2651 max_channels = adapter->product_info.nchannels; 2652 2653 if( channel >= max_channels ) { 2654 goto free_pci; 2655 } 2656 2657 for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) { 2658 2659 i = channel*16 + tgt; 2660 2661 state = *(pdrv_state + i); 2662 2663 switch( state & 0x0F ) { 2664 2665 case PDRV_ONLINE: 2666 sprintf(str, 2667 "Channel:%2d Id:%2d State: Online", 2668 channel, tgt); 2669 break; 2670 2671 case PDRV_FAILED: 2672 sprintf(str, 2673 "Channel:%2d Id:%2d State: Failed", 2674 channel, tgt); 2675 break; 2676 2677 case PDRV_RBLD: 2678 sprintf(str, 2679 "Channel:%2d Id:%2d State: Rebuild", 2680 channel, tgt); 2681 break; 2682 2683 case PDRV_HOTSPARE: 2684 sprintf(str, 2685 "Channel:%2d Id:%2d State: Hot spare", 2686 channel, tgt); 2687 break; 2688 2689 default: 2690 sprintf(str, 2691 "Channel:%2d Id:%2d State: Un-configured", 2692 channel, tgt); 2693 break; 2694 2695 } 2696 2697 /* 2698 * This interface displays inquiries for disk drives 2699 * only. Inquries for logical drives and non-disk 2700 * devices are available through /proc/scsi/scsi 2701 */ 2702 memset(scsi_inq, 0, 256); 2703 if( mega_internal_dev_inquiry(adapter, channel, tgt, 2704 scsi_inq_dma_handle) || 2705 (scsi_inq[0] & 0x1F) != TYPE_DISK ) { 2706 continue; 2707 } 2708 2709 /* 2710 * Check for overflow. We print less than 240 2711 * characters for inquiry 2712 */ 2713 if( (len + 240) >= PAGE_SIZE ) break; 2714 2715 len += sprintf(page+len, "%s.\n", str); 2716 2717 len += mega_print_inquiry(page+len, scsi_inq); 2718 } 2719 2720 free_pci: 2721 pci_free_consistent(pdev, 256, scsi_inq, scsi_inq_dma_handle); 2722 free_inquiry: 2723 mega_free_inquiry(inquiry, dma_handle, pdev); 2724 free_pdev: 2725 free_local_pdev(pdev); 2726 2727 return len; 2728 } 2729 2730 2731 /* 2732 * Display scsi inquiry 2733 */ 2734 static int 2735 mega_print_inquiry(char *page, char *scsi_inq) 2736 { 2737 int len = 0; 2738 int i; 2739 2740 len = sprintf(page, " Vendor: "); 2741 for( i = 8; i < 16; i++ ) { 2742 len += sprintf(page+len, "%c", scsi_inq[i]); 2743 } 2744 2745 len += sprintf(page+len, " Model: "); 2746 2747 for( i = 16; i < 32; i++ ) { 2748 len += sprintf(page+len, "%c", scsi_inq[i]); 2749 } 2750 2751 len += sprintf(page+len, " Rev: "); 2752 2753 for( i = 32; i < 36; i++ ) { 2754 len += sprintf(page+len, "%c", scsi_inq[i]); 2755 } 2756 2757 len += sprintf(page+len, "\n"); 2758 2759 i = scsi_inq[0] & 0x1f; 2760 2761 len += sprintf(page+len, " Type: %s ", scsi_device_type(i)); 2762 2763 len += sprintf(page+len, 2764 " ANSI SCSI revision: %02x", scsi_inq[2] & 0x07); 2765 2766 if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 ) 2767 len += sprintf(page+len, " CCS\n"); 2768 else 2769 len += sprintf(page+len, "\n"); 2770 2771 return len; 2772 } 2773 2774 2775 /** 2776 * proc_rdrv_10() 2777 * @page - buffer to write the data in 2778 * @start - where the actual data has been written in page 2779 * @offset - same meaning as the read system call 2780 * @count - same meaning as the read system call 2781 * @eof - set if no more data needs to be returned 2782 * @data - pointer to our soft state 2783 * 2784 * Display real time information about the logical drives 0 through 9. 2785 */ 2786 static int 2787 proc_rdrv_10(char *page, char **start, off_t offset, int count, int *eof, 2788 void *data) 2789 { 2790 adapter_t *adapter = (adapter_t *)data; 2791 2792 *eof = 1; 2793 2794 return (proc_rdrv(adapter, page, 0, 9)); 2795 } 2796 2797 2798 /** 2799 * proc_rdrv_20() 2800 * @page - buffer to write the data in 2801 * @start - where the actual data has been written in page 2802 * @offset - same meaning as the read system call 2803 * @count - same meaning as the read system call 2804 * @eof - set if no more data needs to be returned 2805 * @data - pointer to our soft state 2806 * 2807 * Display real time information about the logical drives 0 through 9. 2808 */ 2809 static int 2810 proc_rdrv_20(char *page, char **start, off_t offset, int count, int *eof, 2811 void *data) 2812 { 2813 adapter_t *adapter = (adapter_t *)data; 2814 2815 *eof = 1; 2816 2817 return (proc_rdrv(adapter, page, 10, 19)); 2818 } 2819 2820 2821 /** 2822 * proc_rdrv_30() 2823 * @page - buffer to write the data in 2824 * @start - where the actual data has been written in page 2825 * @offset - same meaning as the read system call 2826 * @count - same meaning as the read system call 2827 * @eof - set if no more data needs to be returned 2828 * @data - pointer to our soft state 2829 * 2830 * Display real time information about the logical drives 0 through 9. 2831 */ 2832 static int 2833 proc_rdrv_30(char *page, char **start, off_t offset, int count, int *eof, 2834 void *data) 2835 { 2836 adapter_t *adapter = (adapter_t *)data; 2837 2838 *eof = 1; 2839 2840 return (proc_rdrv(adapter, page, 20, 29)); 2841 } 2842 2843 2844 /** 2845 * proc_rdrv_40() 2846 * @page - buffer to write the data in 2847 * @start - where the actual data has been written in page 2848 * @offset - same meaning as the read system call 2849 * @count - same meaning as the read system call 2850 * @eof - set if no more data needs to be returned 2851 * @data - pointer to our soft state 2852 * 2853 * Display real time information about the logical drives 0 through 9. 2854 */ 2855 static int 2856 proc_rdrv_40(char *page, char **start, off_t offset, int count, int *eof, 2857 void *data) 2858 { 2859 adapter_t *adapter = (adapter_t *)data; 2860 2861 *eof = 1; 2862 2863 return (proc_rdrv(adapter, page, 30, 39)); 2864 } 2865 2866 2867 /** 2868 * proc_rdrv() 2869 * @page - buffer to write the data in 2870 * @adapter - pointer to our soft state 2871 * @start - starting logical drive to display 2872 * @end - ending logical drive to display 2873 * 2874 * We do not print the inquiry information since its already available through 2875 * /proc/scsi/scsi interface 2876 */ 2877 static int 2878 proc_rdrv(adapter_t *adapter, char *page, int start, int end ) 2879 { 2880 dma_addr_t dma_handle; 2881 logdrv_param *lparam; 2882 megacmd_t mc; 2883 char *disk_array; 2884 dma_addr_t disk_array_dma_handle; 2885 caddr_t inquiry; 2886 struct pci_dev *pdev; 2887 u8 *rdrv_state; 2888 int num_ldrv; 2889 u32 array_sz; 2890 int len = 0; 2891 int i; 2892 2893 if( make_local_pdev(adapter, &pdev) != 0 ) { 2894 return len; 2895 } 2896 2897 if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL ) { 2898 free_local_pdev(pdev); 2899 return len; 2900 } 2901 2902 if( mega_adapinq(adapter, dma_handle) != 0 ) { 2903 2904 len = sprintf(page, "Adapter inquiry failed.\n"); 2905 2906 printk(KERN_WARNING "megaraid: inquiry failed.\n"); 2907 2908 mega_free_inquiry(inquiry, dma_handle, pdev); 2909 2910 free_local_pdev(pdev); 2911 2912 return len; 2913 } 2914 2915 memset(&mc, 0, sizeof(megacmd_t)); 2916 2917 if( adapter->flag & BOARD_40LD ) { 2918 array_sz = sizeof(disk_array_40ld); 2919 2920 rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state; 2921 2922 num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv; 2923 } 2924 else { 2925 array_sz = sizeof(disk_array_8ld); 2926 2927 rdrv_state = ((mraid_ext_inquiry *)inquiry)-> 2928 raid_inq.logdrv_info.ldrv_state; 2929 2930 num_ldrv = ((mraid_ext_inquiry *)inquiry)-> 2931 raid_inq.logdrv_info.num_ldrv; 2932 } 2933 2934 disk_array = pci_alloc_consistent(pdev, array_sz, 2935 &disk_array_dma_handle); 2936 2937 if( disk_array == NULL ) { 2938 len = sprintf(page, "memory not available.\n"); 2939 2940 mega_free_inquiry(inquiry, dma_handle, pdev); 2941 2942 free_local_pdev(pdev); 2943 2944 return len; 2945 } 2946 2947 mc.xferaddr = (u32)disk_array_dma_handle; 2948 2949 if( adapter->flag & BOARD_40LD ) { 2950 mc.cmd = FC_NEW_CONFIG; 2951 mc.opcode = OP_DCMD_READ_CONFIG; 2952 2953 if( mega_internal_command(adapter, &mc, NULL) ) { 2954 2955 len = sprintf(page, "40LD read config failed.\n"); 2956 2957 mega_free_inquiry(inquiry, dma_handle, pdev); 2958 2959 pci_free_consistent(pdev, array_sz, disk_array, 2960 disk_array_dma_handle); 2961 2962 free_local_pdev(pdev); 2963 2964 return len; 2965 } 2966 2967 } 2968 else { 2969 mc.cmd = NEW_READ_CONFIG_8LD; 2970 2971 if( mega_internal_command(adapter, &mc, NULL) ) { 2972 2973 mc.cmd = READ_CONFIG_8LD; 2974 2975 if( mega_internal_command(adapter, &mc, 2976 NULL) ){ 2977 2978 len = sprintf(page, 2979 "8LD read config failed.\n"); 2980 2981 mega_free_inquiry(inquiry, dma_handle, pdev); 2982 2983 pci_free_consistent(pdev, array_sz, 2984 disk_array, 2985 disk_array_dma_handle); 2986 2987 free_local_pdev(pdev); 2988 2989 return len; 2990 } 2991 } 2992 } 2993 2994 for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) { 2995 2996 if( adapter->flag & BOARD_40LD ) { 2997 lparam = 2998 &((disk_array_40ld *)disk_array)->ldrv[i].lparam; 2999 } 3000 else { 3001 lparam = 3002 &((disk_array_8ld *)disk_array)->ldrv[i].lparam; 3003 } 3004 3005 /* 3006 * Check for overflow. We print less than 240 characters for 3007 * information about each logical drive. 3008 */ 3009 if( (len + 240) >= PAGE_SIZE ) break; 3010 3011 len += sprintf(page+len, "Logical drive:%2d:, ", i); 3012 3013 switch( rdrv_state[i] & 0x0F ) { 3014 case RDRV_OFFLINE: 3015 len += sprintf(page+len, "state: offline"); 3016 break; 3017 3018 case RDRV_DEGRADED: 3019 len += sprintf(page+len, "state: degraded"); 3020 break; 3021 3022 case RDRV_OPTIMAL: 3023 len += sprintf(page+len, "state: optimal"); 3024 break; 3025 3026 case RDRV_DELETED: 3027 len += sprintf(page+len, "state: deleted"); 3028 break; 3029 3030 default: 3031 len += sprintf(page+len, "state: unknown"); 3032 break; 3033 } 3034 3035 /* 3036 * Check if check consistency or initialization is going on 3037 * for this logical drive. 3038 */ 3039 if( (rdrv_state[i] & 0xF0) == 0x20 ) { 3040 len += sprintf(page+len, 3041 ", check-consistency in progress"); 3042 } 3043 else if( (rdrv_state[i] & 0xF0) == 0x10 ) { 3044 len += sprintf(page+len, 3045 ", initialization in progress"); 3046 } 3047 3048 len += sprintf(page+len, "\n"); 3049 3050 len += sprintf(page+len, "Span depth:%3d, ", 3051 lparam->span_depth); 3052 3053 len += sprintf(page+len, "RAID level:%3d, ", 3054 lparam->level); 3055 3056 len += sprintf(page+len, "Stripe size:%3d, ", 3057 lparam->stripe_sz ? lparam->stripe_sz/2: 128); 3058 3059 len += sprintf(page+len, "Row size:%3d\n", 3060 lparam->row_size); 3061 3062 3063 len += sprintf(page+len, "Read Policy: "); 3064 3065 switch(lparam->read_ahead) { 3066 3067 case NO_READ_AHEAD: 3068 len += sprintf(page+len, "No read ahead, "); 3069 break; 3070 3071 case READ_AHEAD: 3072 len += sprintf(page+len, "Read ahead, "); 3073 break; 3074 3075 case ADAP_READ_AHEAD: 3076 len += sprintf(page+len, "Adaptive, "); 3077 break; 3078 3079 } 3080 3081 len += sprintf(page+len, "Write Policy: "); 3082 3083 switch(lparam->write_mode) { 3084 3085 case WRMODE_WRITE_THRU: 3086 len += sprintf(page+len, "Write thru, "); 3087 break; 3088 3089 case WRMODE_WRITE_BACK: 3090 len += sprintf(page+len, "Write back, "); 3091 break; 3092 } 3093 3094 len += sprintf(page+len, "Cache Policy: "); 3095 3096 switch(lparam->direct_io) { 3097 3098 case CACHED_IO: 3099 len += sprintf(page+len, "Cached IO\n\n"); 3100 break; 3101 3102 case DIRECT_IO: 3103 len += sprintf(page+len, "Direct IO\n\n"); 3104 break; 3105 } 3106 } 3107 3108 mega_free_inquiry(inquiry, dma_handle, pdev); 3109 3110 pci_free_consistent(pdev, array_sz, disk_array, 3111 disk_array_dma_handle); 3112 3113 free_local_pdev(pdev); 3114 3115 return len; 3116 } 3117 #else 3118 static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent) 3119 { 3120 } 3121 #endif 3122 3123 3124 /** 3125 * megaraid_biosparam() 3126 * 3127 * Return the disk geometry for a particular disk 3128 */ 3129 static int 3130 megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev, 3131 sector_t capacity, int geom[]) 3132 { 3133 adapter_t *adapter; 3134 unsigned char *bh; 3135 int heads; 3136 int sectors; 3137 int cylinders; 3138 int rval; 3139 3140 /* Get pointer to host config structure */ 3141 adapter = (adapter_t *)sdev->host->hostdata; 3142 3143 if (IS_RAID_CH(adapter, sdev->channel)) { 3144 /* Default heads (64) & sectors (32) */ 3145 heads = 64; 3146 sectors = 32; 3147 cylinders = (ulong)capacity / (heads * sectors); 3148 3149 /* 3150 * Handle extended translation size for logical drives 3151 * > 1Gb 3152 */ 3153 if ((ulong)capacity >= 0x200000) { 3154 heads = 255; 3155 sectors = 63; 3156 cylinders = (ulong)capacity / (heads * sectors); 3157 } 3158 3159 /* return result */ 3160 geom[0] = heads; 3161 geom[1] = sectors; 3162 geom[2] = cylinders; 3163 } 3164 else { 3165 bh = scsi_bios_ptable(bdev); 3166 3167 if( bh ) { 3168 rval = scsi_partsize(bh, capacity, 3169 &geom[2], &geom[0], &geom[1]); 3170 kfree(bh); 3171 if( rval != -1 ) 3172 return rval; 3173 } 3174 3175 printk(KERN_INFO 3176 "megaraid: invalid partition on this disk on channel %d\n", 3177 sdev->channel); 3178 3179 /* Default heads (64) & sectors (32) */ 3180 heads = 64; 3181 sectors = 32; 3182 cylinders = (ulong)capacity / (heads * sectors); 3183 3184 /* Handle extended translation size for logical drives > 1Gb */ 3185 if ((ulong)capacity >= 0x200000) { 3186 heads = 255; 3187 sectors = 63; 3188 cylinders = (ulong)capacity / (heads * sectors); 3189 } 3190 3191 /* return result */ 3192 geom[0] = heads; 3193 geom[1] = sectors; 3194 geom[2] = cylinders; 3195 } 3196 3197 return 0; 3198 } 3199 3200 /** 3201 * mega_init_scb() 3202 * @adapter - pointer to our soft state 3203 * 3204 * Allocate memory for the various pointers in the scb structures: 3205 * scatter-gather list pointer, passthru and extended passthru structure 3206 * pointers. 3207 */ 3208 static int 3209 mega_init_scb(adapter_t *adapter) 3210 { 3211 scb_t *scb; 3212 int i; 3213 3214 for( i = 0; i < adapter->max_cmds; i++ ) { 3215 3216 scb = &adapter->scb_list[i]; 3217 3218 scb->sgl64 = NULL; 3219 scb->sgl = NULL; 3220 scb->pthru = NULL; 3221 scb->epthru = NULL; 3222 } 3223 3224 for( i = 0; i < adapter->max_cmds; i++ ) { 3225 3226 scb = &adapter->scb_list[i]; 3227 3228 scb->idx = i; 3229 3230 scb->sgl64 = pci_alloc_consistent(adapter->dev, 3231 sizeof(mega_sgl64) * adapter->sglen, 3232 &scb->sgl_dma_addr); 3233 3234 scb->sgl = (mega_sglist *)scb->sgl64; 3235 3236 if( !scb->sgl ) { 3237 printk(KERN_WARNING "RAID: Can't allocate sglist.\n"); 3238 mega_free_sgl(adapter); 3239 return -1; 3240 } 3241 3242 scb->pthru = pci_alloc_consistent(adapter->dev, 3243 sizeof(mega_passthru), 3244 &scb->pthru_dma_addr); 3245 3246 if( !scb->pthru ) { 3247 printk(KERN_WARNING "RAID: Can't allocate passthru.\n"); 3248 mega_free_sgl(adapter); 3249 return -1; 3250 } 3251 3252 scb->epthru = pci_alloc_consistent(adapter->dev, 3253 sizeof(mega_ext_passthru), 3254 &scb->epthru_dma_addr); 3255 3256 if( !scb->epthru ) { 3257 printk(KERN_WARNING 3258 "Can't allocate extended passthru.\n"); 3259 mega_free_sgl(adapter); 3260 return -1; 3261 } 3262 3263 3264 scb->dma_type = MEGA_DMA_TYPE_NONE; 3265 3266 /* 3267 * Link to free list 3268 * lock not required since we are loading the driver, so no 3269 * commands possible right now. 3270 */ 3271 scb->state = SCB_FREE; 3272 scb->cmd = NULL; 3273 list_add(&scb->list, &adapter->free_list); 3274 } 3275 3276 return 0; 3277 } 3278 3279 3280 /** 3281 * megadev_open() 3282 * @inode - unused 3283 * @filep - unused 3284 * 3285 * Routines for the character/ioctl interface to the driver. Find out if this 3286 * is a valid open. 3287 */ 3288 static int 3289 megadev_open (struct inode *inode, struct file *filep) 3290 { 3291 /* 3292 * Only allow superuser to access private ioctl interface 3293 */ 3294 if( !capable(CAP_SYS_ADMIN) ) return -EACCES; 3295 3296 return 0; 3297 } 3298 3299 3300 /** 3301 * megadev_ioctl() 3302 * @inode - Our device inode 3303 * @filep - unused 3304 * @cmd - ioctl command 3305 * @arg - user buffer 3306 * 3307 * ioctl entry point for our private ioctl interface. We move the data in from 3308 * the user space, prepare the command (if necessary, convert the old MIMD 3309 * ioctl to new ioctl command), and issue a synchronous command to the 3310 * controller. 3311 */ 3312 static int 3313 megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) 3314 { 3315 adapter_t *adapter; 3316 nitioctl_t uioc; 3317 int adapno; 3318 int rval; 3319 mega_passthru __user *upthru; /* user address for passthru */ 3320 mega_passthru *pthru; /* copy user passthru here */ 3321 dma_addr_t pthru_dma_hndl; 3322 void *data = NULL; /* data to be transferred */ 3323 dma_addr_t data_dma_hndl; /* dma handle for data xfer area */ 3324 megacmd_t mc; 3325 megastat_t __user *ustats; 3326 int num_ldrv; 3327 u32 uxferaddr = 0; 3328 struct pci_dev *pdev; 3329 3330 ustats = NULL; /* avoid compilation warnings */ 3331 num_ldrv = 0; 3332 3333 /* 3334 * Make sure only USCSICMD are issued through this interface. 3335 * MIMD application would still fire different command. 3336 */ 3337 if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) { 3338 return -EINVAL; 3339 } 3340 3341 /* 3342 * Check and convert a possible MIMD command to NIT command. 3343 * mega_m_to_n() copies the data from the user space, so we do not 3344 * have to do it here. 3345 * NOTE: We will need some user address to copyout the data, therefore 3346 * the inteface layer will also provide us with the required user 3347 * addresses. 3348 */ 3349 memset(&uioc, 0, sizeof(nitioctl_t)); 3350 if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 ) 3351 return rval; 3352 3353 3354 switch( uioc.opcode ) { 3355 3356 case GET_DRIVER_VER: 3357 if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) ) 3358 return (-EFAULT); 3359 3360 break; 3361 3362 case GET_N_ADAP: 3363 if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) ) 3364 return (-EFAULT); 3365 3366 /* 3367 * Shucks. MIMD interface returns a positive value for number 3368 * of adapters. TODO: Change it to return 0 when there is no 3369 * applicatio using mimd interface. 3370 */ 3371 return hba_count; 3372 3373 case GET_ADAP_INFO: 3374 3375 /* 3376 * Which adapter 3377 */ 3378 if( (adapno = GETADAP(uioc.adapno)) >= hba_count ) 3379 return (-ENODEV); 3380 3381 if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno, 3382 sizeof(struct mcontroller)) ) 3383 return (-EFAULT); 3384 break; 3385 3386 #if MEGA_HAVE_STATS 3387 3388 case GET_STATS: 3389 /* 3390 * Which adapter 3391 */ 3392 if( (adapno = GETADAP(uioc.adapno)) >= hba_count ) 3393 return (-ENODEV); 3394 3395 adapter = hba_soft_state[adapno]; 3396 3397 ustats = uioc.uioc_uaddr; 3398 3399 if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) ) 3400 return (-EFAULT); 3401 3402 /* 3403 * Check for the validity of the logical drive number 3404 */ 3405 if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL; 3406 3407 if( copy_to_user(ustats->nreads, adapter->nreads, 3408 num_ldrv*sizeof(u32)) ) 3409 return -EFAULT; 3410 3411 if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks, 3412 num_ldrv*sizeof(u32)) ) 3413 return -EFAULT; 3414 3415 if( copy_to_user(ustats->nwrites, adapter->nwrites, 3416 num_ldrv*sizeof(u32)) ) 3417 return -EFAULT; 3418 3419 if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks, 3420 num_ldrv*sizeof(u32)) ) 3421 return -EFAULT; 3422 3423 if( copy_to_user(ustats->rd_errors, adapter->rd_errors, 3424 num_ldrv*sizeof(u32)) ) 3425 return -EFAULT; 3426 3427 if( copy_to_user(ustats->wr_errors, adapter->wr_errors, 3428 num_ldrv*sizeof(u32)) ) 3429 return -EFAULT; 3430 3431 return 0; 3432 3433 #endif 3434 case MBOX_CMD: 3435 3436 /* 3437 * Which adapter 3438 */ 3439 if( (adapno = GETADAP(uioc.adapno)) >= hba_count ) 3440 return (-ENODEV); 3441 3442 adapter = hba_soft_state[adapno]; 3443 3444 /* 3445 * Deletion of logical drive is a special case. The adapter 3446 * should be quiescent before this command is issued. 3447 */ 3448 if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV && 3449 uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) { 3450 3451 /* 3452 * Do we support this feature 3453 */ 3454 if( !adapter->support_random_del ) { 3455 printk(KERN_WARNING "megaraid: logdrv "); 3456 printk("delete on non-supporting F/W.\n"); 3457 3458 return (-EINVAL); 3459 } 3460 3461 rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] ); 3462 3463 if( rval == 0 ) { 3464 memset(&mc, 0, sizeof(megacmd_t)); 3465 3466 mc.status = rval; 3467 3468 rval = mega_n_to_m((void __user *)arg, &mc); 3469 } 3470 3471 return rval; 3472 } 3473 /* 3474 * This interface only support the regular passthru commands. 3475 * Reject extended passthru and 64-bit passthru 3476 */ 3477 if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 || 3478 uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) { 3479 3480 printk(KERN_WARNING "megaraid: rejected passthru.\n"); 3481 3482 return (-EINVAL); 3483 } 3484 3485 /* 3486 * For all internal commands, the buffer must be allocated in 3487 * <4GB address range 3488 */ 3489 if( make_local_pdev(adapter, &pdev) != 0 ) 3490 return -EIO; 3491 3492 /* Is it a passthru command or a DCMD */ 3493 if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) { 3494 /* Passthru commands */ 3495 3496 pthru = pci_alloc_consistent(pdev, 3497 sizeof(mega_passthru), 3498 &pthru_dma_hndl); 3499 3500 if( pthru == NULL ) { 3501 free_local_pdev(pdev); 3502 return (-ENOMEM); 3503 } 3504 3505 /* 3506 * The user passthru structure 3507 */ 3508 upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr; 3509 3510 /* 3511 * Copy in the user passthru here. 3512 */ 3513 if( copy_from_user(pthru, upthru, 3514 sizeof(mega_passthru)) ) { 3515 3516 pci_free_consistent(pdev, 3517 sizeof(mega_passthru), pthru, 3518 pthru_dma_hndl); 3519 3520 free_local_pdev(pdev); 3521 3522 return (-EFAULT); 3523 } 3524 3525 /* 3526 * Is there a data transfer 3527 */ 3528 if( pthru->dataxferlen ) { 3529 data = pci_alloc_consistent(pdev, 3530 pthru->dataxferlen, 3531 &data_dma_hndl); 3532 3533 if( data == NULL ) { 3534 pci_free_consistent(pdev, 3535 sizeof(mega_passthru), 3536 pthru, 3537 pthru_dma_hndl); 3538 3539 free_local_pdev(pdev); 3540 3541 return (-ENOMEM); 3542 } 3543 3544 /* 3545 * Save the user address and point the kernel 3546 * address at just allocated memory 3547 */ 3548 uxferaddr = pthru->dataxferaddr; 3549 pthru->dataxferaddr = data_dma_hndl; 3550 } 3551 3552 3553 /* 3554 * Is data coming down-stream 3555 */ 3556 if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) { 3557 /* 3558 * Get the user data 3559 */ 3560 if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr, 3561 pthru->dataxferlen) ) { 3562 rval = (-EFAULT); 3563 goto freemem_and_return; 3564 } 3565 } 3566 3567 memset(&mc, 0, sizeof(megacmd_t)); 3568 3569 mc.cmd = MEGA_MBOXCMD_PASSTHRU; 3570 mc.xferaddr = (u32)pthru_dma_hndl; 3571 3572 /* 3573 * Issue the command 3574 */ 3575 mega_internal_command(adapter, &mc, pthru); 3576 3577 rval = mega_n_to_m((void __user *)arg, &mc); 3578 3579 if( rval ) goto freemem_and_return; 3580 3581 3582 /* 3583 * Is data going up-stream 3584 */ 3585 if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) { 3586 if( copy_to_user((char __user *)(unsigned long) uxferaddr, data, 3587 pthru->dataxferlen) ) { 3588 rval = (-EFAULT); 3589 } 3590 } 3591 3592 /* 3593 * Send the request sense data also, irrespective of 3594 * whether the user has asked for it or not. 3595 */ 3596 if (copy_to_user(upthru->reqsensearea, 3597 pthru->reqsensearea, 14)) 3598 rval = -EFAULT; 3599 3600 freemem_and_return: 3601 if( pthru->dataxferlen ) { 3602 pci_free_consistent(pdev, 3603 pthru->dataxferlen, data, 3604 data_dma_hndl); 3605 } 3606 3607 pci_free_consistent(pdev, sizeof(mega_passthru), 3608 pthru, pthru_dma_hndl); 3609 3610 free_local_pdev(pdev); 3611 3612 return rval; 3613 } 3614 else { 3615 /* DCMD commands */ 3616 3617 /* 3618 * Is there a data transfer 3619 */ 3620 if( uioc.xferlen ) { 3621 data = pci_alloc_consistent(pdev, 3622 uioc.xferlen, &data_dma_hndl); 3623 3624 if( data == NULL ) { 3625 free_local_pdev(pdev); 3626 return (-ENOMEM); 3627 } 3628 3629 uxferaddr = MBOX(uioc)->xferaddr; 3630 } 3631 3632 /* 3633 * Is data coming down-stream 3634 */ 3635 if( uioc.xferlen && (uioc.flags & UIOC_WR) ) { 3636 /* 3637 * Get the user data 3638 */ 3639 if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr, 3640 uioc.xferlen) ) { 3641 3642 pci_free_consistent(pdev, 3643 uioc.xferlen, 3644 data, data_dma_hndl); 3645 3646 free_local_pdev(pdev); 3647 3648 return (-EFAULT); 3649 } 3650 } 3651 3652 memcpy(&mc, MBOX(uioc), sizeof(megacmd_t)); 3653 3654 mc.xferaddr = (u32)data_dma_hndl; 3655 3656 /* 3657 * Issue the command 3658 */ 3659 mega_internal_command(adapter, &mc, NULL); 3660 3661 rval = mega_n_to_m((void __user *)arg, &mc); 3662 3663 if( rval ) { 3664 if( uioc.xferlen ) { 3665 pci_free_consistent(pdev, 3666 uioc.xferlen, data, 3667 data_dma_hndl); 3668 } 3669 3670 free_local_pdev(pdev); 3671 3672 return rval; 3673 } 3674 3675 /* 3676 * Is data going up-stream 3677 */ 3678 if( uioc.xferlen && (uioc.flags & UIOC_RD) ) { 3679 if( copy_to_user((char __user *)(unsigned long) uxferaddr, data, 3680 uioc.xferlen) ) { 3681 3682 rval = (-EFAULT); 3683 } 3684 } 3685 3686 if( uioc.xferlen ) { 3687 pci_free_consistent(pdev, 3688 uioc.xferlen, data, 3689 data_dma_hndl); 3690 } 3691 3692 free_local_pdev(pdev); 3693 3694 return rval; 3695 } 3696 3697 default: 3698 return (-EINVAL); 3699 } 3700 3701 return 0; 3702 } 3703 3704 static long 3705 megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) 3706 { 3707 int ret; 3708 3709 mutex_lock(&megadev_mutex); 3710 ret = megadev_ioctl(filep, cmd, arg); 3711 mutex_unlock(&megadev_mutex); 3712 3713 return ret; 3714 } 3715 3716 /** 3717 * mega_m_to_n() 3718 * @arg - user address 3719 * @uioc - new ioctl structure 3720 * 3721 * A thin layer to convert older mimd interface ioctl structure to NIT ioctl 3722 * structure 3723 * 3724 * Converts the older mimd ioctl structure to newer NIT structure 3725 */ 3726 static int 3727 mega_m_to_n(void __user *arg, nitioctl_t *uioc) 3728 { 3729 struct uioctl_t uioc_mimd; 3730 char signature[8] = {0}; 3731 u8 opcode; 3732 u8 subopcode; 3733 3734 3735 /* 3736 * check is the application conforms to NIT. We do not have to do much 3737 * in that case. 3738 * We exploit the fact that the signature is stored in the very 3739 * beginning of the structure. 3740 */ 3741 3742 if( copy_from_user(signature, arg, 7) ) 3743 return (-EFAULT); 3744 3745 if( memcmp(signature, "MEGANIT", 7) == 0 ) { 3746 3747 /* 3748 * NOTE NOTE: The nit ioctl is still under flux because of 3749 * change of mailbox definition, in HPE. No applications yet 3750 * use this interface and let's not have applications use this 3751 * interface till the new specifitions are in place. 3752 */ 3753 return -EINVAL; 3754 #if 0 3755 if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) ) 3756 return (-EFAULT); 3757 return 0; 3758 #endif 3759 } 3760 3761 /* 3762 * Else assume we have mimd uioctl_t as arg. Convert to nitioctl_t 3763 * 3764 * Get the user ioctl structure 3765 */ 3766 if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) ) 3767 return (-EFAULT); 3768 3769 3770 /* 3771 * Get the opcode and subopcode for the commands 3772 */ 3773 opcode = uioc_mimd.ui.fcs.opcode; 3774 subopcode = uioc_mimd.ui.fcs.subopcode; 3775 3776 switch (opcode) { 3777 case 0x82: 3778 3779 switch (subopcode) { 3780 3781 case MEGAIOC_QDRVRVER: /* Query driver version */ 3782 uioc->opcode = GET_DRIVER_VER; 3783 uioc->uioc_uaddr = uioc_mimd.data; 3784 break; 3785 3786 case MEGAIOC_QNADAP: /* Get # of adapters */ 3787 uioc->opcode = GET_N_ADAP; 3788 uioc->uioc_uaddr = uioc_mimd.data; 3789 break; 3790 3791 case MEGAIOC_QADAPINFO: /* Get adapter information */ 3792 uioc->opcode = GET_ADAP_INFO; 3793 uioc->adapno = uioc_mimd.ui.fcs.adapno; 3794 uioc->uioc_uaddr = uioc_mimd.data; 3795 break; 3796 3797 default: 3798 return(-EINVAL); 3799 } 3800 3801 break; 3802 3803 3804 case 0x81: 3805 3806 uioc->opcode = MBOX_CMD; 3807 uioc->adapno = uioc_mimd.ui.fcs.adapno; 3808 3809 memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18); 3810 3811 uioc->xferlen = uioc_mimd.ui.fcs.length; 3812 3813 if( uioc_mimd.outlen ) uioc->flags = UIOC_RD; 3814 if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR; 3815 3816 break; 3817 3818 case 0x80: 3819 3820 uioc->opcode = MBOX_CMD; 3821 uioc->adapno = uioc_mimd.ui.fcs.adapno; 3822 3823 memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18); 3824 3825 /* 3826 * Choose the xferlen bigger of input and output data 3827 */ 3828 uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ? 3829 uioc_mimd.outlen : uioc_mimd.inlen; 3830 3831 if( uioc_mimd.outlen ) uioc->flags = UIOC_RD; 3832 if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR; 3833 3834 break; 3835 3836 default: 3837 return (-EINVAL); 3838 3839 } 3840 3841 return 0; 3842 } 3843 3844 /* 3845 * mega_n_to_m() 3846 * @arg - user address 3847 * @mc - mailbox command 3848 * 3849 * Updates the status information to the application, depending on application 3850 * conforms to older mimd ioctl interface or newer NIT ioctl interface 3851 */ 3852 static int 3853 mega_n_to_m(void __user *arg, megacmd_t *mc) 3854 { 3855 nitioctl_t __user *uiocp; 3856 megacmd_t __user *umc; 3857 mega_passthru __user *upthru; 3858 struct uioctl_t __user *uioc_mimd; 3859 char signature[8] = {0}; 3860 3861 /* 3862 * check is the application conforms to NIT. 3863 */ 3864 if( copy_from_user(signature, arg, 7) ) 3865 return -EFAULT; 3866 3867 if( memcmp(signature, "MEGANIT", 7) == 0 ) { 3868 3869 uiocp = arg; 3870 3871 if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) ) 3872 return (-EFAULT); 3873 3874 if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) { 3875 3876 umc = MBOX_P(uiocp); 3877 3878 if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr)) 3879 return -EFAULT; 3880 3881 if( put_user(mc->status, (u8 __user *)&upthru->scsistatus)) 3882 return (-EFAULT); 3883 } 3884 } 3885 else { 3886 uioc_mimd = arg; 3887 3888 if( put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]) ) 3889 return (-EFAULT); 3890 3891 if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) { 3892 3893 umc = (megacmd_t __user *)uioc_mimd->mbox; 3894 3895 if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr)) 3896 return (-EFAULT); 3897 3898 if( put_user(mc->status, (u8 __user *)&upthru->scsistatus) ) 3899 return (-EFAULT); 3900 } 3901 } 3902 3903 return 0; 3904 } 3905 3906 3907 /* 3908 * MEGARAID 'FW' commands. 3909 */ 3910 3911 /** 3912 * mega_is_bios_enabled() 3913 * @adapter - pointer to our soft state 3914 * 3915 * issue command to find out if the BIOS is enabled for this controller 3916 */ 3917 static int 3918 mega_is_bios_enabled(adapter_t *adapter) 3919 { 3920 unsigned char raw_mbox[sizeof(struct mbox_out)]; 3921 mbox_t *mbox; 3922 int ret; 3923 3924 mbox = (mbox_t *)raw_mbox; 3925 3926 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 3927 3928 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 3929 3930 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 3931 3932 raw_mbox[0] = IS_BIOS_ENABLED; 3933 raw_mbox[2] = GET_BIOS; 3934 3935 3936 ret = issue_scb_block(adapter, raw_mbox); 3937 3938 return *(char *)adapter->mega_buffer; 3939 } 3940 3941 3942 /** 3943 * mega_enum_raid_scsi() 3944 * @adapter - pointer to our soft state 3945 * 3946 * Find out what channels are RAID/SCSI. This information is used to 3947 * differentiate the virtual channels and physical channels and to support 3948 * ROMB feature and non-disk devices. 3949 */ 3950 static void 3951 mega_enum_raid_scsi(adapter_t *adapter) 3952 { 3953 unsigned char raw_mbox[sizeof(struct mbox_out)]; 3954 mbox_t *mbox; 3955 int i; 3956 3957 mbox = (mbox_t *)raw_mbox; 3958 3959 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 3960 3961 /* 3962 * issue command to find out what channels are raid/scsi 3963 */ 3964 raw_mbox[0] = CHNL_CLASS; 3965 raw_mbox[2] = GET_CHNL_CLASS; 3966 3967 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 3968 3969 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 3970 3971 /* 3972 * Non-ROMB firmware fail this command, so all channels 3973 * must be shown RAID 3974 */ 3975 adapter->mega_ch_class = 0xFF; 3976 3977 if(!issue_scb_block(adapter, raw_mbox)) { 3978 adapter->mega_ch_class = *((char *)adapter->mega_buffer); 3979 3980 } 3981 3982 for( i = 0; i < adapter->product_info.nchannels; i++ ) { 3983 if( (adapter->mega_ch_class >> i) & 0x01 ) { 3984 printk(KERN_INFO "megaraid: channel[%d] is raid.\n", 3985 i); 3986 } 3987 else { 3988 printk(KERN_INFO "megaraid: channel[%d] is scsi.\n", 3989 i); 3990 } 3991 } 3992 3993 return; 3994 } 3995 3996 3997 /** 3998 * mega_get_boot_drv() 3999 * @adapter - pointer to our soft state 4000 * 4001 * Find out which device is the boot device. Note, any logical drive or any 4002 * phyical device (e.g., a CDROM) can be designated as a boot device. 4003 */ 4004 static void 4005 mega_get_boot_drv(adapter_t *adapter) 4006 { 4007 struct private_bios_data *prv_bios_data; 4008 unsigned char raw_mbox[sizeof(struct mbox_out)]; 4009 mbox_t *mbox; 4010 u16 cksum = 0; 4011 u8 *cksum_p; 4012 u8 boot_pdrv; 4013 int i; 4014 4015 mbox = (mbox_t *)raw_mbox; 4016 4017 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 4018 4019 raw_mbox[0] = BIOS_PVT_DATA; 4020 raw_mbox[2] = GET_BIOS_PVT_DATA; 4021 4022 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 4023 4024 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 4025 4026 adapter->boot_ldrv_enabled = 0; 4027 adapter->boot_ldrv = 0; 4028 4029 adapter->boot_pdrv_enabled = 0; 4030 adapter->boot_pdrv_ch = 0; 4031 adapter->boot_pdrv_tgt = 0; 4032 4033 if(issue_scb_block(adapter, raw_mbox) == 0) { 4034 prv_bios_data = 4035 (struct private_bios_data *)adapter->mega_buffer; 4036 4037 cksum = 0; 4038 cksum_p = (char *)prv_bios_data; 4039 for (i = 0; i < 14; i++ ) { 4040 cksum += (u16)(*cksum_p++); 4041 } 4042 4043 if (prv_bios_data->cksum == (u16)(0-cksum) ) { 4044 4045 /* 4046 * If MSB is set, a physical drive is set as boot 4047 * device 4048 */ 4049 if( prv_bios_data->boot_drv & 0x80 ) { 4050 adapter->boot_pdrv_enabled = 1; 4051 boot_pdrv = prv_bios_data->boot_drv & 0x7F; 4052 adapter->boot_pdrv_ch = boot_pdrv / 16; 4053 adapter->boot_pdrv_tgt = boot_pdrv % 16; 4054 } 4055 else { 4056 adapter->boot_ldrv_enabled = 1; 4057 adapter->boot_ldrv = prv_bios_data->boot_drv; 4058 } 4059 } 4060 } 4061 4062 } 4063 4064 /** 4065 * mega_support_random_del() 4066 * @adapter - pointer to our soft state 4067 * 4068 * Find out if this controller supports random deletion and addition of 4069 * logical drives 4070 */ 4071 static int 4072 mega_support_random_del(adapter_t *adapter) 4073 { 4074 unsigned char raw_mbox[sizeof(struct mbox_out)]; 4075 mbox_t *mbox; 4076 int rval; 4077 4078 mbox = (mbox_t *)raw_mbox; 4079 4080 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 4081 4082 /* 4083 * issue command 4084 */ 4085 raw_mbox[0] = FC_DEL_LOGDRV; 4086 raw_mbox[2] = OP_SUP_DEL_LOGDRV; 4087 4088 rval = issue_scb_block(adapter, raw_mbox); 4089 4090 return !rval; 4091 } 4092 4093 4094 /** 4095 * mega_support_ext_cdb() 4096 * @adapter - pointer to our soft state 4097 * 4098 * Find out if this firmware support cdblen > 10 4099 */ 4100 static int 4101 mega_support_ext_cdb(adapter_t *adapter) 4102 { 4103 unsigned char raw_mbox[sizeof(struct mbox_out)]; 4104 mbox_t *mbox; 4105 int rval; 4106 4107 mbox = (mbox_t *)raw_mbox; 4108 4109 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 4110 /* 4111 * issue command to find out if controller supports extended CDBs. 4112 */ 4113 raw_mbox[0] = 0xA4; 4114 raw_mbox[2] = 0x16; 4115 4116 rval = issue_scb_block(adapter, raw_mbox); 4117 4118 return !rval; 4119 } 4120 4121 4122 /** 4123 * mega_del_logdrv() 4124 * @adapter - pointer to our soft state 4125 * @logdrv - logical drive to be deleted 4126 * 4127 * Delete the specified logical drive. It is the responsibility of the user 4128 * app to let the OS know about this operation. 4129 */ 4130 static int 4131 mega_del_logdrv(adapter_t *adapter, int logdrv) 4132 { 4133 unsigned long flags; 4134 scb_t *scb; 4135 int rval; 4136 4137 /* 4138 * Stop sending commands to the controller, queue them internally. 4139 * When deletion is complete, ISR will flush the queue. 4140 */ 4141 atomic_set(&adapter->quiescent, 1); 4142 4143 /* 4144 * Wait till all the issued commands are complete and there are no 4145 * commands in the pending queue 4146 */ 4147 while (atomic_read(&adapter->pend_cmds) > 0 || 4148 !list_empty(&adapter->pending_list)) 4149 msleep(1000); /* sleep for 1s */ 4150 4151 rval = mega_do_del_logdrv(adapter, logdrv); 4152 4153 spin_lock_irqsave(&adapter->lock, flags); 4154 4155 /* 4156 * If delete operation was successful, add 0x80 to the logical drive 4157 * ids for commands in the pending queue. 4158 */ 4159 if (adapter->read_ldidmap) { 4160 struct list_head *pos; 4161 list_for_each(pos, &adapter->pending_list) { 4162 scb = list_entry(pos, scb_t, list); 4163 if (scb->pthru->logdrv < 0x80 ) 4164 scb->pthru->logdrv += 0x80; 4165 } 4166 } 4167 4168 atomic_set(&adapter->quiescent, 0); 4169 4170 mega_runpendq(adapter); 4171 4172 spin_unlock_irqrestore(&adapter->lock, flags); 4173 4174 return rval; 4175 } 4176 4177 4178 static int 4179 mega_do_del_logdrv(adapter_t *adapter, int logdrv) 4180 { 4181 megacmd_t mc; 4182 int rval; 4183 4184 memset( &mc, 0, sizeof(megacmd_t)); 4185 4186 mc.cmd = FC_DEL_LOGDRV; 4187 mc.opcode = OP_DEL_LOGDRV; 4188 mc.subopcode = logdrv; 4189 4190 rval = mega_internal_command(adapter, &mc, NULL); 4191 4192 /* log this event */ 4193 if(rval) { 4194 printk(KERN_WARNING "megaraid: Delete LD-%d failed.", logdrv); 4195 return rval; 4196 } 4197 4198 /* 4199 * After deleting first logical drive, the logical drives must be 4200 * addressed by adding 0x80 to the logical drive id. 4201 */ 4202 adapter->read_ldidmap = 1; 4203 4204 return rval; 4205 } 4206 4207 4208 /** 4209 * mega_get_max_sgl() 4210 * @adapter - pointer to our soft state 4211 * 4212 * Find out the maximum number of scatter-gather elements supported by this 4213 * version of the firmware 4214 */ 4215 static void 4216 mega_get_max_sgl(adapter_t *adapter) 4217 { 4218 unsigned char raw_mbox[sizeof(struct mbox_out)]; 4219 mbox_t *mbox; 4220 4221 mbox = (mbox_t *)raw_mbox; 4222 4223 memset(mbox, 0, sizeof(raw_mbox)); 4224 4225 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 4226 4227 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 4228 4229 raw_mbox[0] = MAIN_MISC_OPCODE; 4230 raw_mbox[2] = GET_MAX_SG_SUPPORT; 4231 4232 4233 if( issue_scb_block(adapter, raw_mbox) ) { 4234 /* 4235 * f/w does not support this command. Choose the default value 4236 */ 4237 adapter->sglen = MIN_SGLIST; 4238 } 4239 else { 4240 adapter->sglen = *((char *)adapter->mega_buffer); 4241 4242 /* 4243 * Make sure this is not more than the resources we are 4244 * planning to allocate 4245 */ 4246 if ( adapter->sglen > MAX_SGLIST ) 4247 adapter->sglen = MAX_SGLIST; 4248 } 4249 4250 return; 4251 } 4252 4253 4254 /** 4255 * mega_support_cluster() 4256 * @adapter - pointer to our soft state 4257 * 4258 * Find out if this firmware support cluster calls. 4259 */ 4260 static int 4261 mega_support_cluster(adapter_t *adapter) 4262 { 4263 unsigned char raw_mbox[sizeof(struct mbox_out)]; 4264 mbox_t *mbox; 4265 4266 mbox = (mbox_t *)raw_mbox; 4267 4268 memset(mbox, 0, sizeof(raw_mbox)); 4269 4270 memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE); 4271 4272 mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; 4273 4274 /* 4275 * Try to get the initiator id. This command will succeed iff the 4276 * clustering is available on this HBA. 4277 */ 4278 raw_mbox[0] = MEGA_GET_TARGET_ID; 4279 4280 if( issue_scb_block(adapter, raw_mbox) == 0 ) { 4281 4282 /* 4283 * Cluster support available. Get the initiator target id. 4284 * Tell our id to mid-layer too. 4285 */ 4286 adapter->this_id = *(u32 *)adapter->mega_buffer; 4287 adapter->host->this_id = adapter->this_id; 4288 4289 return 1; 4290 } 4291 4292 return 0; 4293 } 4294 4295 #ifdef CONFIG_PROC_FS 4296 /** 4297 * mega_adapinq() 4298 * @adapter - pointer to our soft state 4299 * @dma_handle - DMA address of the buffer 4300 * 4301 * Issue internal commands while interrupts are available. 4302 * We only issue direct mailbox commands from within the driver. ioctl() 4303 * interface using these routines can issue passthru commands. 4304 */ 4305 static int 4306 mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle) 4307 { 4308 megacmd_t mc; 4309 4310 memset(&mc, 0, sizeof(megacmd_t)); 4311 4312 if( adapter->flag & BOARD_40LD ) { 4313 mc.cmd = FC_NEW_CONFIG; 4314 mc.opcode = NC_SUBOP_ENQUIRY3; 4315 mc.subopcode = ENQ3_GET_SOLICITED_FULL; 4316 } 4317 else { 4318 mc.cmd = MEGA_MBOXCMD_ADPEXTINQ; 4319 } 4320 4321 mc.xferaddr = (u32)dma_handle; 4322 4323 if ( mega_internal_command(adapter, &mc, NULL) != 0 ) { 4324 return -1; 4325 } 4326 4327 return 0; 4328 } 4329 4330 4331 /** mega_internal_dev_inquiry() 4332 * @adapter - pointer to our soft state 4333 * @ch - channel for this device 4334 * @tgt - ID of this device 4335 * @buf_dma_handle - DMA address of the buffer 4336 * 4337 * Issue the scsi inquiry for the specified device. 4338 */ 4339 static int 4340 mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt, 4341 dma_addr_t buf_dma_handle) 4342 { 4343 mega_passthru *pthru; 4344 dma_addr_t pthru_dma_handle; 4345 megacmd_t mc; 4346 int rval; 4347 struct pci_dev *pdev; 4348 4349 4350 /* 4351 * For all internal commands, the buffer must be allocated in <4GB 4352 * address range 4353 */ 4354 if( make_local_pdev(adapter, &pdev) != 0 ) return -1; 4355 4356 pthru = pci_alloc_consistent(pdev, sizeof(mega_passthru), 4357 &pthru_dma_handle); 4358 4359 if( pthru == NULL ) { 4360 free_local_pdev(pdev); 4361 return -1; 4362 } 4363 4364 pthru->timeout = 2; 4365 pthru->ars = 1; 4366 pthru->reqsenselen = 14; 4367 pthru->islogical = 0; 4368 4369 pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : ch; 4370 4371 pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4)|tgt : tgt; 4372 4373 pthru->cdblen = 6; 4374 4375 pthru->cdb[0] = INQUIRY; 4376 pthru->cdb[1] = 0; 4377 pthru->cdb[2] = 0; 4378 pthru->cdb[3] = 0; 4379 pthru->cdb[4] = 255; 4380 pthru->cdb[5] = 0; 4381 4382 4383 pthru->dataxferaddr = (u32)buf_dma_handle; 4384 pthru->dataxferlen = 256; 4385 4386 memset(&mc, 0, sizeof(megacmd_t)); 4387 4388 mc.cmd = MEGA_MBOXCMD_PASSTHRU; 4389 mc.xferaddr = (u32)pthru_dma_handle; 4390 4391 rval = mega_internal_command(adapter, &mc, pthru); 4392 4393 pci_free_consistent(pdev, sizeof(mega_passthru), pthru, 4394 pthru_dma_handle); 4395 4396 free_local_pdev(pdev); 4397 4398 return rval; 4399 } 4400 #endif 4401 4402 /** 4403 * mega_internal_command() 4404 * @adapter - pointer to our soft state 4405 * @mc - the mailbox command 4406 * @pthru - Passthru structure for DCDB commands 4407 * 4408 * Issue the internal commands in interrupt mode. 4409 * The last argument is the address of the passthru structure if the command 4410 * to be fired is a passthru command 4411 * 4412 * lockscope specifies whether the caller has already acquired the lock. Of 4413 * course, the caller must know which lock we are talking about. 4414 * 4415 * Note: parameter 'pthru' is null for non-passthru commands. 4416 */ 4417 static int 4418 mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) 4419 { 4420 Scsi_Cmnd *scmd; 4421 struct scsi_device *sdev; 4422 scb_t *scb; 4423 int rval; 4424 4425 scmd = scsi_allocate_command(GFP_KERNEL); 4426 if (!scmd) 4427 return -ENOMEM; 4428 4429 /* 4430 * The internal commands share one command id and hence are 4431 * serialized. This is so because we want to reserve maximum number of 4432 * available command ids for the I/O commands. 4433 */ 4434 mutex_lock(&adapter->int_mtx); 4435 4436 scb = &adapter->int_scb; 4437 memset(scb, 0, sizeof(scb_t)); 4438 4439 sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); 4440 scmd->device = sdev; 4441 4442 memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); 4443 scmd->cmnd = adapter->int_cdb; 4444 scmd->device->host = adapter->host; 4445 scmd->host_scribble = (void *)scb; 4446 scmd->cmnd[0] = MEGA_INTERNAL_CMD; 4447 4448 scb->state |= SCB_ACTIVE; 4449 scb->cmd = scmd; 4450 4451 memcpy(scb->raw_mbox, mc, sizeof(megacmd_t)); 4452 4453 /* 4454 * Is it a passthru command 4455 */ 4456 if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) { 4457 4458 scb->pthru = pthru; 4459 } 4460 4461 scb->idx = CMDID_INT_CMDS; 4462 4463 megaraid_queue_lck(scmd, mega_internal_done); 4464 4465 wait_for_completion(&adapter->int_waitq); 4466 4467 rval = scmd->result; 4468 mc->status = scmd->result; 4469 kfree(sdev); 4470 4471 /* 4472 * Print a debug message for all failed commands. Applications can use 4473 * this information. 4474 */ 4475 if( scmd->result && trace_level ) { 4476 printk("megaraid: cmd [%x, %x, %x] status:[%x]\n", 4477 mc->cmd, mc->opcode, mc->subopcode, scmd->result); 4478 } 4479 4480 mutex_unlock(&adapter->int_mtx); 4481 4482 scsi_free_command(GFP_KERNEL, scmd); 4483 4484 return rval; 4485 } 4486 4487 4488 /** 4489 * mega_internal_done() 4490 * @scmd - internal scsi command 4491 * 4492 * Callback routine for internal commands. 4493 */ 4494 static void 4495 mega_internal_done(Scsi_Cmnd *scmd) 4496 { 4497 adapter_t *adapter; 4498 4499 adapter = (adapter_t *)scmd->device->host->hostdata; 4500 4501 complete(&adapter->int_waitq); 4502 4503 } 4504 4505 4506 static struct scsi_host_template megaraid_template = { 4507 .module = THIS_MODULE, 4508 .name = "MegaRAID", 4509 .proc_name = "megaraid_legacy", 4510 .info = megaraid_info, 4511 .queuecommand = megaraid_queue, 4512 .bios_param = megaraid_biosparam, 4513 .max_sectors = MAX_SECTORS_PER_IO, 4514 .can_queue = MAX_COMMANDS, 4515 .this_id = DEFAULT_INITIATOR_ID, 4516 .sg_tablesize = MAX_SGLIST, 4517 .cmd_per_lun = DEF_CMD_PER_LUN, 4518 .use_clustering = ENABLE_CLUSTERING, 4519 .eh_abort_handler = megaraid_abort, 4520 .eh_device_reset_handler = megaraid_reset, 4521 .eh_bus_reset_handler = megaraid_reset, 4522 .eh_host_reset_handler = megaraid_reset, 4523 }; 4524 4525 static int 4526 megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) 4527 { 4528 struct Scsi_Host *host; 4529 adapter_t *adapter; 4530 unsigned long mega_baseport, tbase, flag = 0; 4531 u16 subsysid, subsysvid; 4532 u8 pci_bus, pci_dev_func; 4533 int irq, i, j; 4534 int error = -ENODEV; 4535 4536 if (pci_enable_device(pdev)) 4537 goto out; 4538 pci_set_master(pdev); 4539 4540 pci_bus = pdev->bus->number; 4541 pci_dev_func = pdev->devfn; 4542 4543 /* 4544 * The megaraid3 stuff reports the ID of the Intel part which is not 4545 * remotely specific to the megaraid 4546 */ 4547 if (pdev->vendor == PCI_VENDOR_ID_INTEL) { 4548 u16 magic; 4549 /* 4550 * Don't fall over the Compaq management cards using the same 4551 * PCI identifier 4552 */ 4553 if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ && 4554 pdev->subsystem_device == 0xC000) 4555 return -ENODEV; 4556 /* Now check the magic signature byte */ 4557 pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic); 4558 if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE) 4559 return -ENODEV; 4560 /* Ok it is probably a megaraid */ 4561 } 4562 4563 /* 4564 * For these vendor and device ids, signature offsets are not 4565 * valid and 64 bit is implicit 4566 */ 4567 if (id->driver_data & BOARD_64BIT) 4568 flag |= BOARD_64BIT; 4569 else { 4570 u32 magic64; 4571 4572 pci_read_config_dword(pdev, PCI_CONF_AMISIG64, &magic64); 4573 if (magic64 == HBA_SIGNATURE_64BIT) 4574 flag |= BOARD_64BIT; 4575 } 4576 4577 subsysvid = pdev->subsystem_vendor; 4578 subsysid = pdev->subsystem_device; 4579 4580 printk(KERN_NOTICE "megaraid: found 0x%4.04x:0x%4.04x:bus %d:", 4581 id->vendor, id->device, pci_bus); 4582 4583 printk("slot %d:func %d\n", 4584 PCI_SLOT(pci_dev_func), PCI_FUNC(pci_dev_func)); 4585 4586 /* Read the base port and IRQ from PCI */ 4587 mega_baseport = pci_resource_start(pdev, 0); 4588 irq = pdev->irq; 4589 4590 tbase = mega_baseport; 4591 if (pci_resource_flags(pdev, 0) & IORESOURCE_MEM) { 4592 flag |= BOARD_MEMMAP; 4593 4594 if (!request_mem_region(mega_baseport, 128, "megaraid")) { 4595 printk(KERN_WARNING "megaraid: mem region busy!\n"); 4596 goto out_disable_device; 4597 } 4598 4599 mega_baseport = (unsigned long)ioremap(mega_baseport, 128); 4600 if (!mega_baseport) { 4601 printk(KERN_WARNING 4602 "megaraid: could not map hba memory\n"); 4603 goto out_release_region; 4604 } 4605 } else { 4606 flag |= BOARD_IOMAP; 4607 mega_baseport += 0x10; 4608 4609 if (!request_region(mega_baseport, 16, "megaraid")) 4610 goto out_disable_device; 4611 } 4612 4613 /* Initialize SCSI Host structure */ 4614 host = scsi_host_alloc(&megaraid_template, sizeof(adapter_t)); 4615 if (!host) 4616 goto out_iounmap; 4617 4618 adapter = (adapter_t *)host->hostdata; 4619 memset(adapter, 0, sizeof(adapter_t)); 4620 4621 printk(KERN_NOTICE 4622 "scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n", 4623 host->host_no, mega_baseport, irq); 4624 4625 adapter->base = mega_baseport; 4626 if (flag & BOARD_MEMMAP) 4627 adapter->mmio_base = (void __iomem *) mega_baseport; 4628 4629 INIT_LIST_HEAD(&adapter->free_list); 4630 INIT_LIST_HEAD(&adapter->pending_list); 4631 INIT_LIST_HEAD(&adapter->completed_list); 4632 4633 adapter->flag = flag; 4634 spin_lock_init(&adapter->lock); 4635 4636 host->cmd_per_lun = max_cmd_per_lun; 4637 host->max_sectors = max_sectors_per_io; 4638 4639 adapter->dev = pdev; 4640 adapter->host = host; 4641 4642 adapter->host->irq = irq; 4643 4644 if (flag & BOARD_MEMMAP) 4645 adapter->host->base = tbase; 4646 else { 4647 adapter->host->io_port = tbase; 4648 adapter->host->n_io_port = 16; 4649 } 4650 4651 adapter->host->unique_id = (pci_bus << 8) | pci_dev_func; 4652 4653 /* 4654 * Allocate buffer to issue internal commands. 4655 */ 4656 adapter->mega_buffer = pci_alloc_consistent(adapter->dev, 4657 MEGA_BUFFER_SIZE, &adapter->buf_dma_handle); 4658 if (!adapter->mega_buffer) { 4659 printk(KERN_WARNING "megaraid: out of RAM.\n"); 4660 goto out_host_put; 4661 } 4662 4663 adapter->scb_list = kmalloc(sizeof(scb_t) * MAX_COMMANDS, GFP_KERNEL); 4664 if (!adapter->scb_list) { 4665 printk(KERN_WARNING "megaraid: out of RAM.\n"); 4666 goto out_free_cmd_buffer; 4667 } 4668 4669 if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ? 4670 megaraid_isr_memmapped : megaraid_isr_iomapped, 4671 IRQF_SHARED, "megaraid", adapter)) { 4672 printk(KERN_WARNING 4673 "megaraid: Couldn't register IRQ %d!\n", irq); 4674 goto out_free_scb_list; 4675 } 4676 4677 if (mega_setup_mailbox(adapter)) 4678 goto out_free_irq; 4679 4680 if (mega_query_adapter(adapter)) 4681 goto out_free_mbox; 4682 4683 /* 4684 * Have checks for some buggy f/w 4685 */ 4686 if ((subsysid == 0x1111) && (subsysvid == 0x1111)) { 4687 /* 4688 * Which firmware 4689 */ 4690 if (!strcmp(adapter->fw_version, "3.00") || 4691 !strcmp(adapter->fw_version, "3.01")) { 4692 4693 printk( KERN_WARNING 4694 "megaraid: Your card is a Dell PERC " 4695 "2/SC RAID controller with " 4696 "firmware\nmegaraid: 3.00 or 3.01. " 4697 "This driver is known to have " 4698 "corruption issues\nmegaraid: with " 4699 "those firmware versions on this " 4700 "specific card. In order\nmegaraid: " 4701 "to protect your data, please upgrade " 4702 "your firmware to version\nmegaraid: " 4703 "3.10 or later, available from the " 4704 "Dell Technical Support web\n" 4705 "megaraid: site at\nhttp://support." 4706 "dell.com/us/en/filelib/download/" 4707 "index.asp?fileid=2940\n" 4708 ); 4709 } 4710 } 4711 4712 /* 4713 * If we have a HP 1M(0x60E7)/2M(0x60E8) controller with 4714 * firmware H.01.07, H.01.08, and H.01.09 disable 64 bit 4715 * support, since this firmware cannot handle 64 bit 4716 * addressing 4717 */ 4718 if ((subsysvid == PCI_VENDOR_ID_HP) && 4719 ((subsysid == 0x60E7) || (subsysid == 0x60E8))) { 4720 /* 4721 * which firmware 4722 */ 4723 if (!strcmp(adapter->fw_version, "H01.07") || 4724 !strcmp(adapter->fw_version, "H01.08") || 4725 !strcmp(adapter->fw_version, "H01.09") ) { 4726 printk(KERN_WARNING 4727 "megaraid: Firmware H.01.07, " 4728 "H.01.08, and H.01.09 on 1M/2M " 4729 "controllers\n" 4730 "megaraid: do not support 64 bit " 4731 "addressing.\nmegaraid: DISABLING " 4732 "64 bit support.\n"); 4733 adapter->flag &= ~BOARD_64BIT; 4734 } 4735 } 4736 4737 if (mega_is_bios_enabled(adapter)) 4738 mega_hbas[hba_count].is_bios_enabled = 1; 4739 mega_hbas[hba_count].hostdata_addr = adapter; 4740 4741 /* 4742 * Find out which channel is raid and which is scsi. This is 4743 * for ROMB support. 4744 */ 4745 mega_enum_raid_scsi(adapter); 4746 4747 /* 4748 * Find out if a logical drive is set as the boot drive. If 4749 * there is one, will make that as the first logical drive. 4750 * ROMB: Do we have to boot from a physical drive. Then all 4751 * the physical drives would appear before the logical disks. 4752 * Else, all the physical drives would be exported to the mid 4753 * layer after logical drives. 4754 */ 4755 mega_get_boot_drv(adapter); 4756 4757 if (adapter->boot_pdrv_enabled) { 4758 j = adapter->product_info.nchannels; 4759 for( i = 0; i < j; i++ ) 4760 adapter->logdrv_chan[i] = 0; 4761 for( i = j; i < NVIRT_CHAN + j; i++ ) 4762 adapter->logdrv_chan[i] = 1; 4763 } else { 4764 for (i = 0; i < NVIRT_CHAN; i++) 4765 adapter->logdrv_chan[i] = 1; 4766 for (i = NVIRT_CHAN; i < MAX_CHANNELS+NVIRT_CHAN; i++) 4767 adapter->logdrv_chan[i] = 0; 4768 adapter->mega_ch_class <<= NVIRT_CHAN; 4769 } 4770 4771 /* 4772 * Do we support random deletion and addition of logical 4773 * drives 4774 */ 4775 adapter->read_ldidmap = 0; /* set it after first logdrv 4776 delete cmd */ 4777 adapter->support_random_del = mega_support_random_del(adapter); 4778 4779 /* Initialize SCBs */ 4780 if (mega_init_scb(adapter)) 4781 goto out_free_mbox; 4782 4783 /* 4784 * Reset the pending commands counter 4785 */ 4786 atomic_set(&adapter->pend_cmds, 0); 4787 4788 /* 4789 * Reset the adapter quiescent flag 4790 */ 4791 atomic_set(&adapter->quiescent, 0); 4792 4793 hba_soft_state[hba_count] = adapter; 4794 4795 /* 4796 * Fill in the structure which needs to be passed back to the 4797 * application when it does an ioctl() for controller related 4798 * information. 4799 */ 4800 i = hba_count; 4801 4802 mcontroller[i].base = mega_baseport; 4803 mcontroller[i].irq = irq; 4804 mcontroller[i].numldrv = adapter->numldrv; 4805 mcontroller[i].pcibus = pci_bus; 4806 mcontroller[i].pcidev = id->device; 4807 mcontroller[i].pcifun = PCI_FUNC (pci_dev_func); 4808 mcontroller[i].pciid = -1; 4809 mcontroller[i].pcivendor = id->vendor; 4810 mcontroller[i].pcislot = PCI_SLOT(pci_dev_func); 4811 mcontroller[i].uid = (pci_bus << 8) | pci_dev_func; 4812 4813 4814 /* Set the Mode of addressing to 64 bit if we can */ 4815 if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) { 4816 pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); 4817 adapter->has_64bit_addr = 1; 4818 } else { 4819 pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); 4820 adapter->has_64bit_addr = 0; 4821 } 4822 4823 mutex_init(&adapter->int_mtx); 4824 init_completion(&adapter->int_waitq); 4825 4826 adapter->this_id = DEFAULT_INITIATOR_ID; 4827 adapter->host->this_id = DEFAULT_INITIATOR_ID; 4828 4829 #if MEGA_HAVE_CLUSTERING 4830 /* 4831 * Is cluster support enabled on this controller 4832 * Note: In a cluster the HBAs ( the initiators ) will have 4833 * different target IDs and we cannot assume it to be 7. Call 4834 * to mega_support_cluster() will get the target ids also if 4835 * the cluster support is available 4836 */ 4837 adapter->has_cluster = mega_support_cluster(adapter); 4838 if (adapter->has_cluster) { 4839 printk(KERN_NOTICE 4840 "megaraid: Cluster driver, initiator id:%d\n", 4841 adapter->this_id); 4842 } 4843 #endif 4844 4845 pci_set_drvdata(pdev, host); 4846 4847 mega_create_proc_entry(hba_count, mega_proc_dir_entry); 4848 4849 error = scsi_add_host(host, &pdev->dev); 4850 if (error) 4851 goto out_free_mbox; 4852 4853 scsi_scan_host(host); 4854 hba_count++; 4855 return 0; 4856 4857 out_free_mbox: 4858 pci_free_consistent(adapter->dev, sizeof(mbox64_t), 4859 adapter->una_mbox64, adapter->una_mbox64_dma); 4860 out_free_irq: 4861 free_irq(adapter->host->irq, adapter); 4862 out_free_scb_list: 4863 kfree(adapter->scb_list); 4864 out_free_cmd_buffer: 4865 pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE, 4866 adapter->mega_buffer, adapter->buf_dma_handle); 4867 out_host_put: 4868 scsi_host_put(host); 4869 out_iounmap: 4870 if (flag & BOARD_MEMMAP) 4871 iounmap((void *)mega_baseport); 4872 out_release_region: 4873 if (flag & BOARD_MEMMAP) 4874 release_mem_region(tbase, 128); 4875 else 4876 release_region(mega_baseport, 16); 4877 out_disable_device: 4878 pci_disable_device(pdev); 4879 out: 4880 return error; 4881 } 4882 4883 static void 4884 __megaraid_shutdown(adapter_t *adapter) 4885 { 4886 u_char raw_mbox[sizeof(struct mbox_out)]; 4887 mbox_t *mbox = (mbox_t *)raw_mbox; 4888 int i; 4889 4890 /* Flush adapter cache */ 4891 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 4892 raw_mbox[0] = FLUSH_ADAPTER; 4893 4894 free_irq(adapter->host->irq, adapter); 4895 4896 /* Issue a blocking (interrupts disabled) command to the card */ 4897 issue_scb_block(adapter, raw_mbox); 4898 4899 /* Flush disks cache */ 4900 memset(&mbox->m_out, 0, sizeof(raw_mbox)); 4901 raw_mbox[0] = FLUSH_SYSTEM; 4902 4903 /* Issue a blocking (interrupts disabled) command to the card */ 4904 issue_scb_block(adapter, raw_mbox); 4905 4906 if (atomic_read(&adapter->pend_cmds) > 0) 4907 printk(KERN_WARNING "megaraid: pending commands!!\n"); 4908 4909 /* 4910 * Have a delibrate delay to make sure all the caches are 4911 * actually flushed. 4912 */ 4913 for (i = 0; i <= 10; i++) 4914 mdelay(1000); 4915 } 4916 4917 static void 4918 megaraid_remove_one(struct pci_dev *pdev) 4919 { 4920 struct Scsi_Host *host = pci_get_drvdata(pdev); 4921 adapter_t *adapter = (adapter_t *)host->hostdata; 4922 4923 scsi_remove_host(host); 4924 4925 __megaraid_shutdown(adapter); 4926 4927 /* Free our resources */ 4928 if (adapter->flag & BOARD_MEMMAP) { 4929 iounmap((void *)adapter->base); 4930 release_mem_region(adapter->host->base, 128); 4931 } else 4932 release_region(adapter->base, 16); 4933 4934 mega_free_sgl(adapter); 4935 4936 #ifdef CONFIG_PROC_FS 4937 if (adapter->controller_proc_dir_entry) { 4938 remove_proc_entry("stat", adapter->controller_proc_dir_entry); 4939 remove_proc_entry("config", 4940 adapter->controller_proc_dir_entry); 4941 remove_proc_entry("mailbox", 4942 adapter->controller_proc_dir_entry); 4943 #if MEGA_HAVE_ENH_PROC 4944 remove_proc_entry("rebuild-rate", 4945 adapter->controller_proc_dir_entry); 4946 remove_proc_entry("battery-status", 4947 adapter->controller_proc_dir_entry); 4948 4949 remove_proc_entry("diskdrives-ch0", 4950 adapter->controller_proc_dir_entry); 4951 remove_proc_entry("diskdrives-ch1", 4952 adapter->controller_proc_dir_entry); 4953 remove_proc_entry("diskdrives-ch2", 4954 adapter->controller_proc_dir_entry); 4955 remove_proc_entry("diskdrives-ch3", 4956 adapter->controller_proc_dir_entry); 4957 4958 remove_proc_entry("raiddrives-0-9", 4959 adapter->controller_proc_dir_entry); 4960 remove_proc_entry("raiddrives-10-19", 4961 adapter->controller_proc_dir_entry); 4962 remove_proc_entry("raiddrives-20-29", 4963 adapter->controller_proc_dir_entry); 4964 remove_proc_entry("raiddrives-30-39", 4965 adapter->controller_proc_dir_entry); 4966 #endif 4967 { 4968 char buf[12] = { 0 }; 4969 sprintf(buf, "hba%d", adapter->host->host_no); 4970 remove_proc_entry(buf, mega_proc_dir_entry); 4971 } 4972 } 4973 #endif 4974 4975 pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE, 4976 adapter->mega_buffer, adapter->buf_dma_handle); 4977 kfree(adapter->scb_list); 4978 pci_free_consistent(adapter->dev, sizeof(mbox64_t), 4979 adapter->una_mbox64, adapter->una_mbox64_dma); 4980 4981 scsi_host_put(host); 4982 pci_disable_device(pdev); 4983 4984 hba_count--; 4985 } 4986 4987 static void 4988 megaraid_shutdown(struct pci_dev *pdev) 4989 { 4990 struct Scsi_Host *host = pci_get_drvdata(pdev); 4991 adapter_t *adapter = (adapter_t *)host->hostdata; 4992 4993 __megaraid_shutdown(adapter); 4994 } 4995 4996 static struct pci_device_id megaraid_pci_tbl[] = { 4997 {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID, 4998 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 4999 {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2, 5000 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 5001 {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3, 5002 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, 5003 {0,} 5004 }; 5005 MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl); 5006 5007 static struct pci_driver megaraid_pci_driver = { 5008 .name = "megaraid_legacy", 5009 .id_table = megaraid_pci_tbl, 5010 .probe = megaraid_probe_one, 5011 .remove = megaraid_remove_one, 5012 .shutdown = megaraid_shutdown, 5013 }; 5014 5015 static int __init megaraid_init(void) 5016 { 5017 int error; 5018 5019 if ((max_cmd_per_lun <= 0) || (max_cmd_per_lun > MAX_CMD_PER_LUN)) 5020 max_cmd_per_lun = MAX_CMD_PER_LUN; 5021 if (max_mbox_busy_wait > MBOX_BUSY_WAIT) 5022 max_mbox_busy_wait = MBOX_BUSY_WAIT; 5023 5024 #ifdef CONFIG_PROC_FS 5025 mega_proc_dir_entry = proc_mkdir("megaraid", NULL); 5026 if (!mega_proc_dir_entry) { 5027 printk(KERN_WARNING 5028 "megaraid: failed to create megaraid root\n"); 5029 } 5030 #endif 5031 error = pci_register_driver(&megaraid_pci_driver); 5032 if (error) { 5033 #ifdef CONFIG_PROC_FS 5034 remove_proc_entry("megaraid", NULL); 5035 #endif 5036 return error; 5037 } 5038 5039 /* 5040 * Register the driver as a character device, for applications 5041 * to access it for ioctls. 5042 * First argument (major) to register_chrdev implies a dynamic 5043 * major number allocation. 5044 */ 5045 major = register_chrdev(0, "megadev_legacy", &megadev_fops); 5046 if (!major) { 5047 printk(KERN_WARNING 5048 "megaraid: failed to register char device\n"); 5049 } 5050 5051 return 0; 5052 } 5053 5054 static void __exit megaraid_exit(void) 5055 { 5056 /* 5057 * Unregister the character device interface to the driver. 5058 */ 5059 unregister_chrdev(major, "megadev_legacy"); 5060 5061 pci_unregister_driver(&megaraid_pci_driver); 5062 5063 #ifdef CONFIG_PROC_FS 5064 remove_proc_entry("megaraid", NULL); 5065 #endif 5066 } 5067 5068 module_init(megaraid_init); 5069 module_exit(megaraid_exit); 5070 5071 /* vi: set ts=8 sw=8 tw=78: */ 5072