1 /* 2 * Generic Macintosh NCR5380 driver 3 * 4 * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov> 5 * 6 * derived in part from: 7 */ 8 /* 9 * Generic Generic NCR5380 driver 10 * 11 * Copyright 1995, Russell King 12 */ 13 14 #include <linux/types.h> 15 #include <linux/delay.h> 16 #include <linux/module.h> 17 #include <linux/ioport.h> 18 #include <linux/init.h> 19 #include <linux/blkdev.h> 20 #include <linux/interrupt.h> 21 #include <linux/platform_device.h> 22 23 #include <asm/hwtest.h> 24 #include <asm/io.h> 25 #include <asm/macints.h> 26 #include <asm/setup.h> 27 28 #include <scsi/scsi_host.h> 29 30 /* Definitions for the core NCR5380 driver. */ 31 32 #define PSEUDO_DMA 33 34 #define NCR5380_implementation_fields unsigned char *pdma_base 35 #define NCR5380_local_declare() struct Scsi_Host *_instance 36 #define NCR5380_setup(instance) _instance = instance 37 38 #define NCR5380_read(reg) macscsi_read(_instance, reg) 39 #define NCR5380_write(reg, value) macscsi_write(_instance, reg, value) 40 41 #define NCR5380_pread macscsi_pread 42 #define NCR5380_pwrite macscsi_pwrite 43 44 #define NCR5380_intr macscsi_intr 45 #define NCR5380_queue_command macscsi_queue_command 46 #define NCR5380_abort macscsi_abort 47 #define NCR5380_bus_reset macscsi_bus_reset 48 #define NCR5380_info macscsi_info 49 #define NCR5380_show_info macscsi_show_info 50 #define NCR5380_write_info macscsi_write_info 51 52 #include "NCR5380.h" 53 54 #define RESET_BOOT 55 56 static int setup_can_queue = -1; 57 module_param(setup_can_queue, int, 0); 58 static int setup_cmd_per_lun = -1; 59 module_param(setup_cmd_per_lun, int, 0); 60 static int setup_sg_tablesize = -1; 61 module_param(setup_sg_tablesize, int, 0); 62 static int setup_use_pdma = -1; 63 module_param(setup_use_pdma, int, 0); 64 static int setup_use_tagged_queuing = -1; 65 module_param(setup_use_tagged_queuing, int, 0); 66 static int setup_hostid = -1; 67 module_param(setup_hostid, int, 0); 68 69 /* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms, 70 * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more 71 * need ten times the standard value... */ 72 #define TOSHIBA_DELAY 73 74 #ifdef TOSHIBA_DELAY 75 #define AFTER_RESET_DELAY (5*HZ/2) 76 #else 77 #define AFTER_RESET_DELAY (HZ/2) 78 #endif 79 80 /* 81 * NCR 5380 register access functions 82 */ 83 84 static inline char macscsi_read(struct Scsi_Host *instance, int reg) 85 { 86 return in_8(instance->base + (reg << 4)); 87 } 88 89 static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value) 90 { 91 out_8(instance->base + (reg << 4), value); 92 } 93 94 #ifndef MODULE 95 static int __init mac_scsi_setup(char *str) 96 { 97 int ints[7]; 98 99 (void)get_options(str, ARRAY_SIZE(ints), ints); 100 101 if (ints[0] < 1 || ints[0] > 6) { 102 pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n"); 103 return 0; 104 } 105 if (ints[0] >= 1) 106 setup_can_queue = ints[1]; 107 if (ints[0] >= 2) 108 setup_cmd_per_lun = ints[2]; 109 if (ints[0] >= 3) 110 setup_sg_tablesize = ints[3]; 111 if (ints[0] >= 4) 112 setup_hostid = ints[4]; 113 if (ints[0] >= 5) 114 setup_use_tagged_queuing = ints[5]; 115 if (ints[0] >= 6) 116 setup_use_pdma = ints[6]; 117 return 1; 118 } 119 120 __setup("mac5380=", mac_scsi_setup); 121 #endif /* !MODULE */ 122 123 #ifdef RESET_BOOT 124 /* 125 * Our 'bus reset on boot' function 126 */ 127 128 static void mac_scsi_reset_boot(struct Scsi_Host *instance) 129 { 130 unsigned long end; 131 132 NCR5380_local_declare(); 133 NCR5380_setup(instance); 134 135 /* 136 * Do a SCSI reset to clean up the bus during initialization. No messing 137 * with the queues, interrupts, or locks necessary here. 138 */ 139 140 printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); 141 142 /* get in phase */ 143 NCR5380_write( TARGET_COMMAND_REG, 144 PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); 145 146 /* assert RST */ 147 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST ); 148 /* The min. reset hold time is 25us, so 40us should be enough */ 149 udelay( 50 ); 150 /* reset RST and interrupt */ 151 NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE ); 152 NCR5380_read( RESET_PARITY_INTERRUPT_REG ); 153 154 for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) 155 barrier(); 156 157 printk(KERN_INFO " done\n" ); 158 } 159 #endif 160 161 #ifdef PSEUDO_DMA 162 /* 163 Pseudo-DMA: (Ove Edlund) 164 The code attempts to catch bus errors that occur if one for example 165 "trips over the cable". 166 XXX: Since bus errors in the PDMA routines never happen on my 167 computer, the bus error code is untested. 168 If the code works as intended, a bus error results in Pseudo-DMA 169 being disabled, meaning that the driver switches to slow handshake. 170 If bus errors are NOT extremely rare, this has to be changed. 171 */ 172 173 #define CP_IO_TO_MEM(s,d,len) \ 174 __asm__ __volatile__ \ 175 (" cmp.w #4,%2\n" \ 176 " bls 8f\n" \ 177 " move.w %1,%%d0\n" \ 178 " neg.b %%d0\n" \ 179 " and.w #3,%%d0\n" \ 180 " sub.w %%d0,%2\n" \ 181 " bra 2f\n" \ 182 " 1: move.b (%0),(%1)+\n" \ 183 " 2: dbf %%d0,1b\n" \ 184 " move.w %2,%%d0\n" \ 185 " lsr.w #5,%%d0\n" \ 186 " bra 4f\n" \ 187 " 3: move.l (%0),(%1)+\n" \ 188 "31: move.l (%0),(%1)+\n" \ 189 "32: move.l (%0),(%1)+\n" \ 190 "33: move.l (%0),(%1)+\n" \ 191 "34: move.l (%0),(%1)+\n" \ 192 "35: move.l (%0),(%1)+\n" \ 193 "36: move.l (%0),(%1)+\n" \ 194 "37: move.l (%0),(%1)+\n" \ 195 " 4: dbf %%d0,3b\n" \ 196 " move.w %2,%%d0\n" \ 197 " lsr.w #2,%%d0\n" \ 198 " and.w #7,%%d0\n" \ 199 " bra 6f\n" \ 200 " 5: move.l (%0),(%1)+\n" \ 201 " 6: dbf %%d0,5b\n" \ 202 " and.w #3,%2\n" \ 203 " bra 8f\n" \ 204 " 7: move.b (%0),(%1)+\n" \ 205 " 8: dbf %2,7b\n" \ 206 " moveq.l #0, %2\n" \ 207 " 9: \n" \ 208 ".section .fixup,\"ax\"\n" \ 209 " .even\n" \ 210 "90: moveq.l #1, %2\n" \ 211 " jra 9b\n" \ 212 ".previous\n" \ 213 ".section __ex_table,\"a\"\n" \ 214 " .align 4\n" \ 215 " .long 1b,90b\n" \ 216 " .long 3b,90b\n" \ 217 " .long 31b,90b\n" \ 218 " .long 32b,90b\n" \ 219 " .long 33b,90b\n" \ 220 " .long 34b,90b\n" \ 221 " .long 35b,90b\n" \ 222 " .long 36b,90b\n" \ 223 " .long 37b,90b\n" \ 224 " .long 5b,90b\n" \ 225 " .long 7b,90b\n" \ 226 ".previous" \ 227 : "=a"(s), "=a"(d), "=d"(len) \ 228 : "0"(s), "1"(d), "2"(len) \ 229 : "d0") 230 231 static int macscsi_pread(struct Scsi_Host *instance, 232 unsigned char *dst, int len) 233 { 234 struct NCR5380_hostdata *hostdata = shost_priv(instance); 235 unsigned char *d; 236 unsigned char *s; 237 238 NCR5380_local_declare(); 239 NCR5380_setup(instance); 240 241 s = hostdata->pdma_base + (INPUT_DATA_REG << 4); 242 d = dst; 243 244 /* These conditions are derived from MacOS */ 245 246 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && 247 !(NCR5380_read(STATUS_REG) & SR_REQ)) 248 ; 249 250 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && 251 (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) { 252 pr_err("Error in macscsi_pread\n"); 253 return -1; 254 } 255 256 CP_IO_TO_MEM(s, d, len); 257 258 if (len != 0) { 259 pr_notice("Bus error in macscsi_pread\n"); 260 return -1; 261 } 262 263 return 0; 264 } 265 266 267 #define CP_MEM_TO_IO(s,d,len) \ 268 __asm__ __volatile__ \ 269 (" cmp.w #4,%2\n" \ 270 " bls 8f\n" \ 271 " move.w %0,%%d0\n" \ 272 " neg.b %%d0\n" \ 273 " and.w #3,%%d0\n" \ 274 " sub.w %%d0,%2\n" \ 275 " bra 2f\n" \ 276 " 1: move.b (%0)+,(%1)\n" \ 277 " 2: dbf %%d0,1b\n" \ 278 " move.w %2,%%d0\n" \ 279 " lsr.w #5,%%d0\n" \ 280 " bra 4f\n" \ 281 " 3: move.l (%0)+,(%1)\n" \ 282 "31: move.l (%0)+,(%1)\n" \ 283 "32: move.l (%0)+,(%1)\n" \ 284 "33: move.l (%0)+,(%1)\n" \ 285 "34: move.l (%0)+,(%1)\n" \ 286 "35: move.l (%0)+,(%1)\n" \ 287 "36: move.l (%0)+,(%1)\n" \ 288 "37: move.l (%0)+,(%1)\n" \ 289 " 4: dbf %%d0,3b\n" \ 290 " move.w %2,%%d0\n" \ 291 " lsr.w #2,%%d0\n" \ 292 " and.w #7,%%d0\n" \ 293 " bra 6f\n" \ 294 " 5: move.l (%0)+,(%1)\n" \ 295 " 6: dbf %%d0,5b\n" \ 296 " and.w #3,%2\n" \ 297 " bra 8f\n" \ 298 " 7: move.b (%0)+,(%1)\n" \ 299 " 8: dbf %2,7b\n" \ 300 " moveq.l #0, %2\n" \ 301 " 9: \n" \ 302 ".section .fixup,\"ax\"\n" \ 303 " .even\n" \ 304 "90: moveq.l #1, %2\n" \ 305 " jra 9b\n" \ 306 ".previous\n" \ 307 ".section __ex_table,\"a\"\n" \ 308 " .align 4\n" \ 309 " .long 1b,90b\n" \ 310 " .long 3b,90b\n" \ 311 " .long 31b,90b\n" \ 312 " .long 32b,90b\n" \ 313 " .long 33b,90b\n" \ 314 " .long 34b,90b\n" \ 315 " .long 35b,90b\n" \ 316 " .long 36b,90b\n" \ 317 " .long 37b,90b\n" \ 318 " .long 5b,90b\n" \ 319 " .long 7b,90b\n" \ 320 ".previous" \ 321 : "=a"(s), "=a"(d), "=d"(len) \ 322 : "0"(s), "1"(d), "2"(len) \ 323 : "d0") 324 325 static int macscsi_pwrite(struct Scsi_Host *instance, 326 unsigned char *src, int len) 327 { 328 struct NCR5380_hostdata *hostdata = shost_priv(instance); 329 unsigned char *s; 330 unsigned char *d; 331 332 NCR5380_local_declare(); 333 NCR5380_setup(instance); 334 335 s = src; 336 d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4); 337 338 /* These conditions are derived from MacOS */ 339 340 while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && 341 (!(NCR5380_read(STATUS_REG) & SR_REQ) || 342 (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))) 343 ; 344 345 if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) { 346 pr_err("Error in macscsi_pwrite\n"); 347 return -1; 348 } 349 350 CP_MEM_TO_IO(s, d, len); 351 352 if (len != 0) { 353 pr_notice("Bus error in macscsi_pwrite\n"); 354 return -1; 355 } 356 357 return 0; 358 } 359 #endif 360 361 #include "NCR5380.c" 362 363 #define DRV_MODULE_NAME "mac_scsi" 364 #define PFX DRV_MODULE_NAME ": " 365 366 static struct scsi_host_template mac_scsi_template = { 367 .module = THIS_MODULE, 368 .proc_name = DRV_MODULE_NAME, 369 .show_info = macscsi_show_info, 370 .write_info = macscsi_write_info, 371 .name = "Macintosh NCR5380 SCSI", 372 .info = macscsi_info, 373 .queuecommand = macscsi_queue_command, 374 .eh_abort_handler = macscsi_abort, 375 .eh_bus_reset_handler = macscsi_bus_reset, 376 .can_queue = 16, 377 .this_id = 7, 378 .sg_tablesize = SG_ALL, 379 .cmd_per_lun = 2, 380 .use_clustering = DISABLE_CLUSTERING 381 }; 382 383 static int __init mac_scsi_probe(struct platform_device *pdev) 384 { 385 struct Scsi_Host *instance; 386 int error; 387 int host_flags = 0; 388 struct resource *irq, *pio_mem, *pdma_mem = NULL; 389 390 pio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 391 if (!pio_mem) 392 return -ENODEV; 393 394 #ifdef PSEUDO_DMA 395 pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); 396 #endif 397 398 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 399 400 if (!hwreg_present((unsigned char *)pio_mem->start + 401 (STATUS_REG << 4))) { 402 pr_info(PFX "no device detected at %pap\n", &pio_mem->start); 403 return -ENODEV; 404 } 405 406 if (setup_can_queue > 0) 407 mac_scsi_template.can_queue = setup_can_queue; 408 if (setup_cmd_per_lun > 0) 409 mac_scsi_template.cmd_per_lun = setup_cmd_per_lun; 410 if (setup_sg_tablesize >= 0) 411 mac_scsi_template.sg_tablesize = setup_sg_tablesize; 412 if (setup_hostid >= 0) 413 mac_scsi_template.this_id = setup_hostid & 7; 414 if (setup_use_pdma < 0) 415 setup_use_pdma = 0; 416 417 instance = scsi_host_alloc(&mac_scsi_template, 418 sizeof(struct NCR5380_hostdata)); 419 if (!instance) 420 return -ENOMEM; 421 422 instance->base = pio_mem->start; 423 if (irq) 424 instance->irq = irq->start; 425 else 426 instance->irq = NO_IRQ; 427 428 if (pdma_mem && setup_use_pdma) { 429 struct NCR5380_hostdata *hostdata = shost_priv(instance); 430 431 hostdata->pdma_base = (unsigned char *)pdma_mem->start; 432 } else 433 host_flags |= FLAG_NO_PSEUDO_DMA; 434 435 #ifdef RESET_BOOT 436 mac_scsi_reset_boot(instance); 437 #endif 438 439 #ifdef SUPPORT_TAGS 440 host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0; 441 #endif 442 443 NCR5380_init(instance, host_flags); 444 445 if (instance->irq != NO_IRQ) { 446 error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED, 447 "NCR5380", instance); 448 if (error) 449 goto fail_irq; 450 } 451 452 error = scsi_add_host(instance, NULL); 453 if (error) 454 goto fail_host; 455 456 platform_set_drvdata(pdev, instance); 457 458 scsi_scan_host(instance); 459 return 0; 460 461 fail_host: 462 if (instance->irq != NO_IRQ) 463 free_irq(instance->irq, instance); 464 fail_irq: 465 NCR5380_exit(instance); 466 scsi_host_put(instance); 467 return error; 468 } 469 470 static int __exit mac_scsi_remove(struct platform_device *pdev) 471 { 472 struct Scsi_Host *instance = platform_get_drvdata(pdev); 473 474 scsi_remove_host(instance); 475 if (instance->irq != NO_IRQ) 476 free_irq(instance->irq, instance); 477 NCR5380_exit(instance); 478 scsi_host_put(instance); 479 return 0; 480 } 481 482 static struct platform_driver mac_scsi_driver = { 483 .remove = __exit_p(mac_scsi_remove), 484 .driver = { 485 .name = DRV_MODULE_NAME, 486 }, 487 }; 488 489 module_platform_driver_probe(mac_scsi_driver, mac_scsi_probe); 490 491 MODULE_ALIAS("platform:" DRV_MODULE_NAME); 492 MODULE_LICENSE("GPL"); 493