1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2004-2016 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 10 * * 11 * This program is free software; you can redistribute it and/or * 12 * modify it under the terms of version 2 of the GNU General * 13 * Public License as published by the Free Software Foundation. * 14 * This program is distributed in the hope that it will be useful. * 15 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 16 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 17 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 18 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 19 * TO BE LEGALLY INVALID. See the GNU General Public License for * 20 * more details, a copy of which can be found in the file COPYING * 21 * included with this package. * 22 *******************************************************************/ 23 24 #include <linux/ctype.h> 25 #include <linux/delay.h> 26 #include <linux/pci.h> 27 #include <linux/interrupt.h> 28 #include <linux/module.h> 29 #include <linux/aer.h> 30 #include <linux/gfp.h> 31 #include <linux/kernel.h> 32 33 #include <scsi/scsi.h> 34 #include <scsi/scsi_device.h> 35 #include <scsi/scsi_host.h> 36 #include <scsi/scsi_tcq.h> 37 #include <scsi/scsi_transport_fc.h> 38 #include <scsi/fc/fc_fs.h> 39 40 #include "lpfc_hw4.h" 41 #include "lpfc_hw.h" 42 #include "lpfc_sli.h" 43 #include "lpfc_sli4.h" 44 #include "lpfc_nl.h" 45 #include "lpfc_disc.h" 46 #include "lpfc.h" 47 #include "lpfc_scsi.h" 48 #include "lpfc_nvme.h" 49 #include "lpfc_logmsg.h" 50 #include "lpfc_version.h" 51 #include "lpfc_compat.h" 52 #include "lpfc_crtn.h" 53 #include "lpfc_vport.h" 54 #include "lpfc_attr.h" 55 56 #define LPFC_DEF_DEVLOSS_TMO 30 57 #define LPFC_MIN_DEVLOSS_TMO 1 58 #define LPFC_MAX_DEVLOSS_TMO 255 59 60 #define LPFC_MAX_INFO_TMP_LEN 100 61 #define LPFC_INFO_MORE_STR "\nCould be more info...\n" 62 /* 63 * Write key size should be multiple of 4. If write key is changed 64 * make sure that library write key is also changed. 65 */ 66 #define LPFC_REG_WRITE_KEY_SIZE 4 67 #define LPFC_REG_WRITE_KEY "EMLX" 68 69 const char *const trunk_errmsg[] = { /* map errcode */ 70 "", /* There is no such error code at index 0*/ 71 "link negotiated speed does not match existing" 72 " trunk - link was \"low\" speed", 73 "link negotiated speed does not match" 74 " existing trunk - link was \"middle\" speed", 75 "link negotiated speed does not match existing" 76 " trunk - link was \"high\" speed", 77 "Attached to non-trunking port - F_Port", 78 "Attached to non-trunking port - N_Port", 79 "FLOGI response timeout", 80 "non-FLOGI frame received", 81 "Invalid FLOGI response", 82 "Trunking initialization protocol", 83 "Trunk peer device mismatch", 84 }; 85 86 /** 87 * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules 88 * @incr: integer to convert. 89 * @hdw: ascii string holding converted integer plus a string terminator. 90 * 91 * Description: 92 * JEDEC Joint Electron Device Engineering Council. 93 * Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii 94 * character string. The string is then terminated with a NULL in byte 9. 95 * Hex 0-9 becomes ascii '0' to '9'. 96 * Hex a-f becomes ascii '=' to 'B' capital B. 97 * 98 * Notes: 99 * Coded for 32 bit integers only. 100 **/ 101 static void 102 lpfc_jedec_to_ascii(int incr, char hdw[]) 103 { 104 int i, j; 105 for (i = 0; i < 8; i++) { 106 j = (incr & 0xf); 107 if (j <= 9) 108 hdw[7 - i] = 0x30 + j; 109 else 110 hdw[7 - i] = 0x61 + j - 10; 111 incr = (incr >> 4); 112 } 113 hdw[8] = 0; 114 return; 115 } 116 117 static ssize_t 118 lpfc_cmf_info_show(struct device *dev, struct device_attribute *attr, 119 char *buf) 120 { 121 struct Scsi_Host *shost = class_to_shost(dev); 122 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 123 struct lpfc_hba *phba = vport->phba; 124 struct lpfc_cgn_info *cp = NULL; 125 struct lpfc_cgn_stat *cgs; 126 int len = 0; 127 int cpu; 128 u64 rcv, total; 129 char tmp[LPFC_MAX_INFO_TMP_LEN] = {0}; 130 131 if (phba->cgn_i) 132 cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; 133 134 scnprintf(tmp, sizeof(tmp), 135 "Congestion Mgmt Info: E2Eattr %d Ver %d " 136 "CMF %d cnt %d\n", 137 phba->sli4_hba.pc_sli4_params.mi_cap, 138 cp ? cp->cgn_info_version : 0, 139 phba->sli4_hba.pc_sli4_params.cmf, phba->cmf_timer_cnt); 140 141 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 142 goto buffer_done; 143 144 if (!phba->sli4_hba.pc_sli4_params.cmf) 145 goto buffer_done; 146 147 switch (phba->cgn_init_reg_signal) { 148 case EDC_CG_SIG_WARN_ONLY: 149 scnprintf(tmp, sizeof(tmp), 150 "Register: Init: Signal:WARN "); 151 break; 152 case EDC_CG_SIG_WARN_ALARM: 153 scnprintf(tmp, sizeof(tmp), 154 "Register: Init: Signal:WARN|ALARM "); 155 break; 156 default: 157 scnprintf(tmp, sizeof(tmp), 158 "Register: Init: Signal:NONE "); 159 break; 160 } 161 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 162 goto buffer_done; 163 164 switch (phba->cgn_init_reg_fpin) { 165 case LPFC_CGN_FPIN_WARN: 166 scnprintf(tmp, sizeof(tmp), 167 "FPIN:WARN\n"); 168 break; 169 case LPFC_CGN_FPIN_ALARM: 170 scnprintf(tmp, sizeof(tmp), 171 "FPIN:ALARM\n"); 172 break; 173 case LPFC_CGN_FPIN_BOTH: 174 scnprintf(tmp, sizeof(tmp), 175 "FPIN:WARN|ALARM\n"); 176 break; 177 default: 178 scnprintf(tmp, sizeof(tmp), 179 "FPIN:NONE\n"); 180 break; 181 } 182 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 183 goto buffer_done; 184 185 switch (phba->cgn_reg_signal) { 186 case EDC_CG_SIG_WARN_ONLY: 187 scnprintf(tmp, sizeof(tmp), 188 " Current: Signal:WARN "); 189 break; 190 case EDC_CG_SIG_WARN_ALARM: 191 scnprintf(tmp, sizeof(tmp), 192 " Current: Signal:WARN|ALARM "); 193 break; 194 default: 195 scnprintf(tmp, sizeof(tmp), 196 " Current: Signal:NONE "); 197 break; 198 } 199 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 200 goto buffer_done; 201 202 switch (phba->cgn_reg_fpin) { 203 case LPFC_CGN_FPIN_WARN: 204 scnprintf(tmp, sizeof(tmp), 205 "FPIN:WARN ACQEcnt:%d\n", phba->cgn_acqe_cnt); 206 break; 207 case LPFC_CGN_FPIN_ALARM: 208 scnprintf(tmp, sizeof(tmp), 209 "FPIN:ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt); 210 break; 211 case LPFC_CGN_FPIN_BOTH: 212 scnprintf(tmp, sizeof(tmp), 213 "FPIN:WARN|ALARM ACQEcnt:%d\n", phba->cgn_acqe_cnt); 214 break; 215 default: 216 scnprintf(tmp, sizeof(tmp), 217 "FPIN:NONE ACQEcnt:%d\n", phba->cgn_acqe_cnt); 218 break; 219 } 220 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 221 goto buffer_done; 222 223 if (phba->cmf_active_mode != phba->cgn_p.cgn_param_mode) { 224 switch (phba->cmf_active_mode) { 225 case LPFC_CFG_OFF: 226 scnprintf(tmp, sizeof(tmp), "Active: Mode:Off\n"); 227 break; 228 case LPFC_CFG_MANAGED: 229 scnprintf(tmp, sizeof(tmp), "Active: Mode:Managed\n"); 230 break; 231 case LPFC_CFG_MONITOR: 232 scnprintf(tmp, sizeof(tmp), "Active: Mode:Monitor\n"); 233 break; 234 default: 235 scnprintf(tmp, sizeof(tmp), "Active: Mode:Unknown\n"); 236 } 237 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 238 goto buffer_done; 239 } 240 241 switch (phba->cgn_p.cgn_param_mode) { 242 case LPFC_CFG_OFF: 243 scnprintf(tmp, sizeof(tmp), "Config: Mode:Off "); 244 break; 245 case LPFC_CFG_MANAGED: 246 scnprintf(tmp, sizeof(tmp), "Config: Mode:Managed "); 247 break; 248 case LPFC_CFG_MONITOR: 249 scnprintf(tmp, sizeof(tmp), "Config: Mode:Monitor "); 250 break; 251 default: 252 scnprintf(tmp, sizeof(tmp), "Config: Mode:Unknown "); 253 } 254 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 255 goto buffer_done; 256 257 total = 0; 258 rcv = 0; 259 for_each_present_cpu(cpu) { 260 cgs = per_cpu_ptr(phba->cmf_stat, cpu); 261 total += atomic64_read(&cgs->total_bytes); 262 rcv += atomic64_read(&cgs->rcv_bytes); 263 } 264 265 scnprintf(tmp, sizeof(tmp), 266 "IObusy:%d Info:%d Bytes: Rcv:x%llx Total:x%llx\n", 267 atomic_read(&phba->cmf_busy), 268 phba->cmf_active_info, rcv, total); 269 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 270 goto buffer_done; 271 272 scnprintf(tmp, sizeof(tmp), 273 "Port_speed:%d Link_byte_cnt:%ld " 274 "Max_byte_per_interval:%ld\n", 275 lpfc_sli_port_speed_get(phba), 276 (unsigned long)phba->cmf_link_byte_count, 277 (unsigned long)phba->cmf_max_bytes_per_interval); 278 strlcat(buf, tmp, PAGE_SIZE); 279 280 buffer_done: 281 len = strnlen(buf, PAGE_SIZE); 282 283 if (unlikely(len >= (PAGE_SIZE - 1))) { 284 lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, 285 "6312 Catching potential buffer " 286 "overflow > PAGE_SIZE = %lu bytes\n", 287 PAGE_SIZE); 288 strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), 289 LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1); 290 } 291 return len; 292 } 293 294 /** 295 * lpfc_drvr_version_show - Return the Emulex driver string with version number 296 * @dev: class unused variable. 297 * @attr: device attribute, not used. 298 * @buf: on return contains the module description text. 299 * 300 * Returns: size of formatted string. 301 **/ 302 static ssize_t 303 lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr, 304 char *buf) 305 { 306 return scnprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n"); 307 } 308 309 /** 310 * lpfc_enable_fip_show - Return the fip mode of the HBA 311 * @dev: class unused variable. 312 * @attr: device attribute, not used. 313 * @buf: on return contains the module description text. 314 * 315 * Returns: size of formatted string. 316 **/ 317 static ssize_t 318 lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr, 319 char *buf) 320 { 321 struct Scsi_Host *shost = class_to_shost(dev); 322 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 323 struct lpfc_hba *phba = vport->phba; 324 325 if (phba->hba_flag & HBA_FIP_SUPPORT) 326 return scnprintf(buf, PAGE_SIZE, "1\n"); 327 else 328 return scnprintf(buf, PAGE_SIZE, "0\n"); 329 } 330 331 static ssize_t 332 lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, 333 char *buf) 334 { 335 struct Scsi_Host *shost = class_to_shost(dev); 336 struct lpfc_vport *vport = shost_priv(shost); 337 struct lpfc_hba *phba = vport->phba; 338 struct lpfc_nvmet_tgtport *tgtp; 339 struct nvme_fc_local_port *localport; 340 struct lpfc_nvme_lport *lport; 341 struct lpfc_nvme_rport *rport; 342 struct lpfc_nodelist *ndlp; 343 struct nvme_fc_remote_port *nrport; 344 struct lpfc_fc4_ctrl_stat *cstat; 345 uint64_t data1, data2, data3; 346 uint64_t totin, totout, tot; 347 char *statep; 348 int i; 349 int len = 0; 350 char tmp[LPFC_MAX_INFO_TMP_LEN] = {0}; 351 352 if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) { 353 len = scnprintf(buf, PAGE_SIZE, "NVME Disabled\n"); 354 return len; 355 } 356 if (phba->nvmet_support) { 357 if (!phba->targetport) { 358 len = scnprintf(buf, PAGE_SIZE, 359 "NVME Target: x%llx is not allocated\n", 360 wwn_to_u64(vport->fc_portname.u.wwn)); 361 return len; 362 } 363 /* Port state is only one of two values for now. */ 364 if (phba->targetport->port_id) 365 statep = "REGISTERED"; 366 else 367 statep = "INIT"; 368 scnprintf(tmp, sizeof(tmp), 369 "NVME Target Enabled State %s\n", 370 statep); 371 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 372 goto buffer_done; 373 374 scnprintf(tmp, sizeof(tmp), 375 "%s%d WWPN x%llx WWNN x%llx DID x%06x\n", 376 "NVME Target: lpfc", 377 phba->brd_no, 378 wwn_to_u64(vport->fc_portname.u.wwn), 379 wwn_to_u64(vport->fc_nodename.u.wwn), 380 phba->targetport->port_id); 381 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 382 goto buffer_done; 383 384 if (strlcat(buf, "\nNVME Target: Statistics\n", PAGE_SIZE) 385 >= PAGE_SIZE) 386 goto buffer_done; 387 388 tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private; 389 scnprintf(tmp, sizeof(tmp), 390 "LS: Rcv %08x Drop %08x Abort %08x\n", 391 atomic_read(&tgtp->rcv_ls_req_in), 392 atomic_read(&tgtp->rcv_ls_req_drop), 393 atomic_read(&tgtp->xmt_ls_abort)); 394 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 395 goto buffer_done; 396 397 if (atomic_read(&tgtp->rcv_ls_req_in) != 398 atomic_read(&tgtp->rcv_ls_req_out)) { 399 scnprintf(tmp, sizeof(tmp), 400 "Rcv LS: in %08x != out %08x\n", 401 atomic_read(&tgtp->rcv_ls_req_in), 402 atomic_read(&tgtp->rcv_ls_req_out)); 403 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 404 goto buffer_done; 405 } 406 407 scnprintf(tmp, sizeof(tmp), 408 "LS: Xmt %08x Drop %08x Cmpl %08x\n", 409 atomic_read(&tgtp->xmt_ls_rsp), 410 atomic_read(&tgtp->xmt_ls_drop), 411 atomic_read(&tgtp->xmt_ls_rsp_cmpl)); 412 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 413 goto buffer_done; 414 415 scnprintf(tmp, sizeof(tmp), 416 "LS: RSP Abort %08x xb %08x Err %08x\n", 417 atomic_read(&tgtp->xmt_ls_rsp_aborted), 418 atomic_read(&tgtp->xmt_ls_rsp_xb_set), 419 atomic_read(&tgtp->xmt_ls_rsp_error)); 420 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 421 goto buffer_done; 422 423 scnprintf(tmp, sizeof(tmp), 424 "FCP: Rcv %08x Defer %08x Release %08x " 425 "Drop %08x\n", 426 atomic_read(&tgtp->rcv_fcp_cmd_in), 427 atomic_read(&tgtp->rcv_fcp_cmd_defer), 428 atomic_read(&tgtp->xmt_fcp_release), 429 atomic_read(&tgtp->rcv_fcp_cmd_drop)); 430 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 431 goto buffer_done; 432 433 if (atomic_read(&tgtp->rcv_fcp_cmd_in) != 434 atomic_read(&tgtp->rcv_fcp_cmd_out)) { 435 scnprintf(tmp, sizeof(tmp), 436 "Rcv FCP: in %08x != out %08x\n", 437 atomic_read(&tgtp->rcv_fcp_cmd_in), 438 atomic_read(&tgtp->rcv_fcp_cmd_out)); 439 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 440 goto buffer_done; 441 } 442 443 scnprintf(tmp, sizeof(tmp), 444 "FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x " 445 "drop %08x\n", 446 atomic_read(&tgtp->xmt_fcp_read), 447 atomic_read(&tgtp->xmt_fcp_read_rsp), 448 atomic_read(&tgtp->xmt_fcp_write), 449 atomic_read(&tgtp->xmt_fcp_rsp), 450 atomic_read(&tgtp->xmt_fcp_drop)); 451 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 452 goto buffer_done; 453 454 scnprintf(tmp, sizeof(tmp), 455 "FCP Rsp Cmpl: %08x err %08x drop %08x\n", 456 atomic_read(&tgtp->xmt_fcp_rsp_cmpl), 457 atomic_read(&tgtp->xmt_fcp_rsp_error), 458 atomic_read(&tgtp->xmt_fcp_rsp_drop)); 459 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 460 goto buffer_done; 461 462 scnprintf(tmp, sizeof(tmp), 463 "FCP Rsp Abort: %08x xb %08x xricqe %08x\n", 464 atomic_read(&tgtp->xmt_fcp_rsp_aborted), 465 atomic_read(&tgtp->xmt_fcp_rsp_xb_set), 466 atomic_read(&tgtp->xmt_fcp_xri_abort_cqe)); 467 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 468 goto buffer_done; 469 470 scnprintf(tmp, sizeof(tmp), 471 "ABORT: Xmt %08x Cmpl %08x\n", 472 atomic_read(&tgtp->xmt_fcp_abort), 473 atomic_read(&tgtp->xmt_fcp_abort_cmpl)); 474 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 475 goto buffer_done; 476 477 scnprintf(tmp, sizeof(tmp), 478 "ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x\n", 479 atomic_read(&tgtp->xmt_abort_sol), 480 atomic_read(&tgtp->xmt_abort_unsol), 481 atomic_read(&tgtp->xmt_abort_rsp), 482 atomic_read(&tgtp->xmt_abort_rsp_error)); 483 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 484 goto buffer_done; 485 486 scnprintf(tmp, sizeof(tmp), 487 "DELAY: ctx %08x fod %08x wqfull %08x\n", 488 atomic_read(&tgtp->defer_ctx), 489 atomic_read(&tgtp->defer_fod), 490 atomic_read(&tgtp->defer_wqfull)); 491 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 492 goto buffer_done; 493 494 /* Calculate outstanding IOs */ 495 tot = atomic_read(&tgtp->rcv_fcp_cmd_drop); 496 tot += atomic_read(&tgtp->xmt_fcp_release); 497 tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot; 498 499 scnprintf(tmp, sizeof(tmp), 500 "IO_CTX: %08x WAIT: cur %08x tot %08x\n" 501 "CTX Outstanding %08llx\n\n", 502 phba->sli4_hba.nvmet_xri_cnt, 503 phba->sli4_hba.nvmet_io_wait_cnt, 504 phba->sli4_hba.nvmet_io_wait_total, 505 tot); 506 strlcat(buf, tmp, PAGE_SIZE); 507 goto buffer_done; 508 } 509 510 localport = vport->localport; 511 if (!localport) { 512 len = scnprintf(buf, PAGE_SIZE, 513 "NVME Initiator x%llx is not allocated\n", 514 wwn_to_u64(vport->fc_portname.u.wwn)); 515 return len; 516 } 517 lport = (struct lpfc_nvme_lport *)localport->private; 518 if (strlcat(buf, "\nNVME Initiator Enabled\n", PAGE_SIZE) >= PAGE_SIZE) 519 goto buffer_done; 520 521 scnprintf(tmp, sizeof(tmp), 522 "XRI Dist lpfc%d Total %d IO %d ELS %d\n", 523 phba->brd_no, 524 phba->sli4_hba.max_cfg_param.max_xri, 525 phba->sli4_hba.io_xri_max, 526 lpfc_sli4_get_els_iocb_cnt(phba)); 527 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 528 goto buffer_done; 529 530 /* Port state is only one of two values for now. */ 531 if (localport->port_id) 532 statep = "ONLINE"; 533 else 534 statep = "UNKNOWN "; 535 536 scnprintf(tmp, sizeof(tmp), 537 "%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n", 538 "NVME LPORT lpfc", 539 phba->brd_no, 540 wwn_to_u64(vport->fc_portname.u.wwn), 541 wwn_to_u64(vport->fc_nodename.u.wwn), 542 localport->port_id, statep); 543 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 544 goto buffer_done; 545 546 spin_lock_irq(shost->host_lock); 547 548 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 549 nrport = NULL; 550 spin_lock(&ndlp->lock); 551 rport = lpfc_ndlp_get_nrport(ndlp); 552 if (rport) 553 nrport = rport->remoteport; 554 spin_unlock(&ndlp->lock); 555 if (!nrport) 556 continue; 557 558 /* Port state is only one of two values for now. */ 559 switch (nrport->port_state) { 560 case FC_OBJSTATE_ONLINE: 561 statep = "ONLINE"; 562 break; 563 case FC_OBJSTATE_UNKNOWN: 564 statep = "UNKNOWN "; 565 break; 566 default: 567 statep = "UNSUPPORTED"; 568 break; 569 } 570 571 /* Tab in to show lport ownership. */ 572 if (strlcat(buf, "NVME RPORT ", PAGE_SIZE) >= PAGE_SIZE) 573 goto unlock_buf_done; 574 if (phba->brd_no >= 10) { 575 if (strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE) 576 goto unlock_buf_done; 577 } 578 579 scnprintf(tmp, sizeof(tmp), "WWPN x%llx ", 580 nrport->port_name); 581 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 582 goto unlock_buf_done; 583 584 scnprintf(tmp, sizeof(tmp), "WWNN x%llx ", 585 nrport->node_name); 586 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 587 goto unlock_buf_done; 588 589 scnprintf(tmp, sizeof(tmp), "DID x%06x ", 590 nrport->port_id); 591 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 592 goto unlock_buf_done; 593 594 /* An NVME rport can have multiple roles. */ 595 if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR) { 596 if (strlcat(buf, "INITIATOR ", PAGE_SIZE) >= PAGE_SIZE) 597 goto unlock_buf_done; 598 } 599 if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET) { 600 if (strlcat(buf, "TARGET ", PAGE_SIZE) >= PAGE_SIZE) 601 goto unlock_buf_done; 602 } 603 if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY) { 604 if (strlcat(buf, "DISCSRVC ", PAGE_SIZE) >= PAGE_SIZE) 605 goto unlock_buf_done; 606 } 607 if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR | 608 FC_PORT_ROLE_NVME_TARGET | 609 FC_PORT_ROLE_NVME_DISCOVERY)) { 610 scnprintf(tmp, sizeof(tmp), "UNKNOWN ROLE x%x", 611 nrport->port_role); 612 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 613 goto unlock_buf_done; 614 } 615 616 scnprintf(tmp, sizeof(tmp), "%s\n", statep); 617 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 618 goto unlock_buf_done; 619 } 620 spin_unlock_irq(shost->host_lock); 621 622 if (!lport) 623 goto buffer_done; 624 625 if (strlcat(buf, "\nNVME Statistics\n", PAGE_SIZE) >= PAGE_SIZE) 626 goto buffer_done; 627 628 scnprintf(tmp, sizeof(tmp), 629 "LS: Xmt %010x Cmpl %010x Abort %08x\n", 630 atomic_read(&lport->fc4NvmeLsRequests), 631 atomic_read(&lport->fc4NvmeLsCmpls), 632 atomic_read(&lport->xmt_ls_abort)); 633 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 634 goto buffer_done; 635 636 scnprintf(tmp, sizeof(tmp), 637 "LS XMIT: Err %08x CMPL: xb %08x Err %08x\n", 638 atomic_read(&lport->xmt_ls_err), 639 atomic_read(&lport->cmpl_ls_xb), 640 atomic_read(&lport->cmpl_ls_err)); 641 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 642 goto buffer_done; 643 644 totin = 0; 645 totout = 0; 646 for (i = 0; i < phba->cfg_hdw_queue; i++) { 647 cstat = &phba->sli4_hba.hdwq[i].nvme_cstat; 648 tot = cstat->io_cmpls; 649 totin += tot; 650 data1 = cstat->input_requests; 651 data2 = cstat->output_requests; 652 data3 = cstat->control_requests; 653 totout += (data1 + data2 + data3); 654 } 655 scnprintf(tmp, sizeof(tmp), 656 "Total FCP Cmpl %016llx Issue %016llx " 657 "OutIO %016llx\n", 658 totin, totout, totout - totin); 659 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 660 goto buffer_done; 661 662 scnprintf(tmp, sizeof(tmp), 663 "\tabort %08x noxri %08x nondlp %08x qdepth %08x " 664 "wqerr %08x err %08x\n", 665 atomic_read(&lport->xmt_fcp_abort), 666 atomic_read(&lport->xmt_fcp_noxri), 667 atomic_read(&lport->xmt_fcp_bad_ndlp), 668 atomic_read(&lport->xmt_fcp_qdepth), 669 atomic_read(&lport->xmt_fcp_wqerr), 670 atomic_read(&lport->xmt_fcp_err)); 671 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 672 goto buffer_done; 673 674 scnprintf(tmp, sizeof(tmp), 675 "FCP CMPL: xb %08x Err %08x\n", 676 atomic_read(&lport->cmpl_fcp_xb), 677 atomic_read(&lport->cmpl_fcp_err)); 678 strlcat(buf, tmp, PAGE_SIZE); 679 680 /* host_lock is already unlocked. */ 681 goto buffer_done; 682 683 unlock_buf_done: 684 spin_unlock_irq(shost->host_lock); 685 686 buffer_done: 687 len = strnlen(buf, PAGE_SIZE); 688 689 if (unlikely(len >= (PAGE_SIZE - 1))) { 690 lpfc_printf_log(phba, KERN_INFO, LOG_NVME, 691 "6314 Catching potential buffer " 692 "overflow > PAGE_SIZE = %lu bytes\n", 693 PAGE_SIZE); 694 strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR), 695 LPFC_INFO_MORE_STR, 696 sizeof(LPFC_INFO_MORE_STR) + 1); 697 } 698 699 return len; 700 } 701 702 static ssize_t 703 lpfc_scsi_stat_show(struct device *dev, struct device_attribute *attr, 704 char *buf) 705 { 706 struct Scsi_Host *shost = class_to_shost(dev); 707 struct lpfc_vport *vport = shost_priv(shost); 708 struct lpfc_hba *phba = vport->phba; 709 int len; 710 struct lpfc_fc4_ctrl_stat *cstat; 711 u64 data1, data2, data3; 712 u64 tot, totin, totout; 713 int i; 714 char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0}; 715 716 if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) || 717 (phba->sli_rev != LPFC_SLI_REV4)) 718 return 0; 719 720 scnprintf(buf, PAGE_SIZE, "SCSI HDWQ Statistics\n"); 721 722 totin = 0; 723 totout = 0; 724 for (i = 0; i < phba->cfg_hdw_queue; i++) { 725 cstat = &phba->sli4_hba.hdwq[i].scsi_cstat; 726 tot = cstat->io_cmpls; 727 totin += tot; 728 data1 = cstat->input_requests; 729 data2 = cstat->output_requests; 730 data3 = cstat->control_requests; 731 totout += (data1 + data2 + data3); 732 733 scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx " 734 "IO %016llx ", i, data1, data2, data3); 735 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 736 goto buffer_done; 737 738 scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n", 739 tot, ((data1 + data2 + data3) - tot)); 740 if (strlcat(buf, tmp, PAGE_SIZE) >= PAGE_SIZE) 741 goto buffer_done; 742 } 743 scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx " 744 "OutIO %016llx\n", totin, totout, totout - totin); 745 strlcat(buf, tmp, PAGE_SIZE); 746 747 buffer_done: 748 len = strnlen(buf, PAGE_SIZE); 749 750 return len; 751 } 752 753 static ssize_t 754 lpfc_bg_info_show(struct device *dev, struct device_attribute *attr, 755 char *buf) 756 { 757 struct Scsi_Host *shost = class_to_shost(dev); 758 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 759 struct lpfc_hba *phba = vport->phba; 760 761 if (phba->cfg_enable_bg) { 762 if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) 763 return scnprintf(buf, PAGE_SIZE, 764 "BlockGuard Enabled\n"); 765 else 766 return scnprintf(buf, PAGE_SIZE, 767 "BlockGuard Not Supported\n"); 768 } else 769 return scnprintf(buf, PAGE_SIZE, 770 "BlockGuard Disabled\n"); 771 } 772 773 static ssize_t 774 lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr, 775 char *buf) 776 { 777 struct Scsi_Host *shost = class_to_shost(dev); 778 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 779 struct lpfc_hba *phba = vport->phba; 780 781 return scnprintf(buf, PAGE_SIZE, "%llu\n", 782 (unsigned long long)phba->bg_guard_err_cnt); 783 } 784 785 static ssize_t 786 lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr, 787 char *buf) 788 { 789 struct Scsi_Host *shost = class_to_shost(dev); 790 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 791 struct lpfc_hba *phba = vport->phba; 792 793 return scnprintf(buf, PAGE_SIZE, "%llu\n", 794 (unsigned long long)phba->bg_apptag_err_cnt); 795 } 796 797 static ssize_t 798 lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr, 799 char *buf) 800 { 801 struct Scsi_Host *shost = class_to_shost(dev); 802 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 803 struct lpfc_hba *phba = vport->phba; 804 805 return scnprintf(buf, PAGE_SIZE, "%llu\n", 806 (unsigned long long)phba->bg_reftag_err_cnt); 807 } 808 809 /** 810 * lpfc_info_show - Return some pci info about the host in ascii 811 * @dev: class converted to a Scsi_host structure. 812 * @attr: device attribute, not used. 813 * @buf: on return contains the formatted text from lpfc_info(). 814 * 815 * Returns: size of formatted string. 816 **/ 817 static ssize_t 818 lpfc_info_show(struct device *dev, struct device_attribute *attr, 819 char *buf) 820 { 821 struct Scsi_Host *host = class_to_shost(dev); 822 823 return scnprintf(buf, PAGE_SIZE, "%s\n", lpfc_info(host)); 824 } 825 826 /** 827 * lpfc_serialnum_show - Return the hba serial number in ascii 828 * @dev: class converted to a Scsi_host structure. 829 * @attr: device attribute, not used. 830 * @buf: on return contains the formatted text serial number. 831 * 832 * Returns: size of formatted string. 833 **/ 834 static ssize_t 835 lpfc_serialnum_show(struct device *dev, struct device_attribute *attr, 836 char *buf) 837 { 838 struct Scsi_Host *shost = class_to_shost(dev); 839 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 840 struct lpfc_hba *phba = vport->phba; 841 842 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->SerialNumber); 843 } 844 845 /** 846 * lpfc_temp_sensor_show - Return the temperature sensor level 847 * @dev: class converted to a Scsi_host structure. 848 * @attr: device attribute, not used. 849 * @buf: on return contains the formatted support level. 850 * 851 * Description: 852 * Returns a number indicating the temperature sensor level currently 853 * supported, zero or one in ascii. 854 * 855 * Returns: size of formatted string. 856 **/ 857 static ssize_t 858 lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr, 859 char *buf) 860 { 861 struct Scsi_Host *shost = class_to_shost(dev); 862 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 863 struct lpfc_hba *phba = vport->phba; 864 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->temp_sensor_support); 865 } 866 867 /** 868 * lpfc_modeldesc_show - Return the model description of the hba 869 * @dev: class converted to a Scsi_host structure. 870 * @attr: device attribute, not used. 871 * @buf: on return contains the scsi vpd model description. 872 * 873 * Returns: size of formatted string. 874 **/ 875 static ssize_t 876 lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr, 877 char *buf) 878 { 879 struct Scsi_Host *shost = class_to_shost(dev); 880 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 881 struct lpfc_hba *phba = vport->phba; 882 883 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelDesc); 884 } 885 886 /** 887 * lpfc_modelname_show - Return the model name of the hba 888 * @dev: class converted to a Scsi_host structure. 889 * @attr: device attribute, not used. 890 * @buf: on return contains the scsi vpd model name. 891 * 892 * Returns: size of formatted string. 893 **/ 894 static ssize_t 895 lpfc_modelname_show(struct device *dev, struct device_attribute *attr, 896 char *buf) 897 { 898 struct Scsi_Host *shost = class_to_shost(dev); 899 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 900 struct lpfc_hba *phba = vport->phba; 901 902 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelName); 903 } 904 905 /** 906 * lpfc_programtype_show - Return the program type of the hba 907 * @dev: class converted to a Scsi_host structure. 908 * @attr: device attribute, not used. 909 * @buf: on return contains the scsi vpd program type. 910 * 911 * Returns: size of formatted string. 912 **/ 913 static ssize_t 914 lpfc_programtype_show(struct device *dev, struct device_attribute *attr, 915 char *buf) 916 { 917 struct Scsi_Host *shost = class_to_shost(dev); 918 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 919 struct lpfc_hba *phba = vport->phba; 920 921 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ProgramType); 922 } 923 924 /** 925 * lpfc_vportnum_show - Return the port number in ascii of the hba 926 * @dev: class converted to a Scsi_host structure. 927 * @attr: device attribute, not used. 928 * @buf: on return contains scsi vpd program type. 929 * 930 * Returns: size of formatted string. 931 **/ 932 static ssize_t 933 lpfc_vportnum_show(struct device *dev, struct device_attribute *attr, 934 char *buf) 935 { 936 struct Scsi_Host *shost = class_to_shost(dev); 937 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 938 struct lpfc_hba *phba = vport->phba; 939 940 return scnprintf(buf, PAGE_SIZE, "%s\n", phba->Port); 941 } 942 943 /** 944 * lpfc_fwrev_show - Return the firmware rev running in the hba 945 * @dev: class converted to a Scsi_host structure. 946 * @attr: device attribute, not used. 947 * @buf: on return contains the scsi vpd program type. 948 * 949 * Returns: size of formatted string. 950 **/ 951 static ssize_t 952 lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, 953 char *buf) 954 { 955 struct Scsi_Host *shost = class_to_shost(dev); 956 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 957 struct lpfc_hba *phba = vport->phba; 958 uint32_t if_type; 959 uint8_t sli_family; 960 char fwrev[FW_REV_STR_SIZE]; 961 int len; 962 963 lpfc_decode_firmware_rev(phba, fwrev, 1); 964 if_type = phba->sli4_hba.pc_sli4_params.if_type; 965 sli_family = phba->sli4_hba.pc_sli4_params.sli_family; 966 967 if (phba->sli_rev < LPFC_SLI_REV4) 968 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d\n", 969 fwrev, phba->sli_rev); 970 else 971 len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n", 972 fwrev, phba->sli_rev, if_type, sli_family); 973 974 return len; 975 } 976 977 /** 978 * lpfc_hdw_show - Return the jedec information about the hba 979 * @dev: class converted to a Scsi_host structure. 980 * @attr: device attribute, not used. 981 * @buf: on return contains the scsi vpd program type. 982 * 983 * Returns: size of formatted string. 984 **/ 985 static ssize_t 986 lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf) 987 { 988 char hdw[9]; 989 struct Scsi_Host *shost = class_to_shost(dev); 990 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 991 struct lpfc_hba *phba = vport->phba; 992 lpfc_vpd_t *vp = &phba->vpd; 993 994 lpfc_jedec_to_ascii(vp->rev.biuRev, hdw); 995 return scnprintf(buf, PAGE_SIZE, "%s %08x %08x\n", hdw, 996 vp->rev.smRev, vp->rev.smFwRev); 997 } 998 999 /** 1000 * lpfc_option_rom_version_show - Return the adapter ROM FCode version 1001 * @dev: class converted to a Scsi_host structure. 1002 * @attr: device attribute, not used. 1003 * @buf: on return contains the ROM and FCode ascii strings. 1004 * 1005 * Returns: size of formatted string. 1006 **/ 1007 static ssize_t 1008 lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr, 1009 char *buf) 1010 { 1011 struct Scsi_Host *shost = class_to_shost(dev); 1012 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1013 struct lpfc_hba *phba = vport->phba; 1014 char fwrev[FW_REV_STR_SIZE]; 1015 1016 if (phba->sli_rev < LPFC_SLI_REV4) 1017 return scnprintf(buf, PAGE_SIZE, "%s\n", 1018 phba->OptionROMVersion); 1019 1020 lpfc_decode_firmware_rev(phba, fwrev, 1); 1021 return scnprintf(buf, PAGE_SIZE, "%s\n", fwrev); 1022 } 1023 1024 /** 1025 * lpfc_link_state_show - Return the link state of the port 1026 * @dev: class converted to a Scsi_host structure. 1027 * @attr: device attribute, not used. 1028 * @buf: on return contains text describing the state of the link. 1029 * 1030 * Notes: 1031 * The switch statement has no default so zero will be returned. 1032 * 1033 * Returns: size of formatted string. 1034 **/ 1035 static ssize_t 1036 lpfc_link_state_show(struct device *dev, struct device_attribute *attr, 1037 char *buf) 1038 { 1039 struct Scsi_Host *shost = class_to_shost(dev); 1040 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1041 struct lpfc_hba *phba = vport->phba; 1042 int len = 0; 1043 1044 switch (phba->link_state) { 1045 case LPFC_LINK_UNKNOWN: 1046 case LPFC_WARM_START: 1047 case LPFC_INIT_START: 1048 case LPFC_INIT_MBX_CMDS: 1049 case LPFC_LINK_DOWN: 1050 case LPFC_HBA_ERROR: 1051 if (phba->hba_flag & LINK_DISABLED) 1052 len += scnprintf(buf + len, PAGE_SIZE-len, 1053 "Link Down - User disabled\n"); 1054 else 1055 len += scnprintf(buf + len, PAGE_SIZE-len, 1056 "Link Down\n"); 1057 break; 1058 case LPFC_LINK_UP: 1059 case LPFC_CLEAR_LA: 1060 case LPFC_HBA_READY: 1061 len += scnprintf(buf + len, PAGE_SIZE-len, "Link Up - "); 1062 1063 switch (vport->port_state) { 1064 case LPFC_LOCAL_CFG_LINK: 1065 len += scnprintf(buf + len, PAGE_SIZE-len, 1066 "Configuring Link\n"); 1067 break; 1068 case LPFC_FDISC: 1069 case LPFC_FLOGI: 1070 case LPFC_FABRIC_CFG_LINK: 1071 case LPFC_NS_REG: 1072 case LPFC_NS_QRY: 1073 case LPFC_BUILD_DISC_LIST: 1074 case LPFC_DISC_AUTH: 1075 len += scnprintf(buf + len, PAGE_SIZE - len, 1076 "Discovery\n"); 1077 break; 1078 case LPFC_VPORT_READY: 1079 len += scnprintf(buf + len, PAGE_SIZE - len, 1080 "Ready\n"); 1081 break; 1082 1083 case LPFC_VPORT_FAILED: 1084 len += scnprintf(buf + len, PAGE_SIZE - len, 1085 "Failed\n"); 1086 break; 1087 1088 case LPFC_VPORT_UNKNOWN: 1089 len += scnprintf(buf + len, PAGE_SIZE - len, 1090 "Unknown\n"); 1091 break; 1092 } 1093 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 1094 if (vport->fc_flag & FC_PUBLIC_LOOP) 1095 len += scnprintf(buf + len, PAGE_SIZE-len, 1096 " Public Loop\n"); 1097 else 1098 len += scnprintf(buf + len, PAGE_SIZE-len, 1099 " Private Loop\n"); 1100 } else { 1101 if (vport->fc_flag & FC_FABRIC) { 1102 if (phba->sli_rev == LPFC_SLI_REV4 && 1103 vport->port_type == LPFC_PHYSICAL_PORT && 1104 phba->sli4_hba.fawwpn_flag & 1105 LPFC_FAWWPN_FABRIC) 1106 len += scnprintf(buf + len, 1107 PAGE_SIZE - len, 1108 " Fabric FA-PWWN\n"); 1109 else 1110 len += scnprintf(buf + len, 1111 PAGE_SIZE - len, 1112 " Fabric\n"); 1113 } else { 1114 len += scnprintf(buf + len, PAGE_SIZE-len, 1115 " Point-2-Point\n"); 1116 } 1117 } 1118 } 1119 1120 if ((phba->sli_rev == LPFC_SLI_REV4) && 1121 ((bf_get(lpfc_sli_intf_if_type, 1122 &phba->sli4_hba.sli_intf) == 1123 LPFC_SLI_INTF_IF_TYPE_6))) { 1124 struct lpfc_trunk_link link = phba->trunk_link; 1125 1126 if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba)) 1127 len += scnprintf(buf + len, PAGE_SIZE - len, 1128 "Trunk port 0: Link %s %s\n", 1129 (link.link0.state == LPFC_LINK_UP) ? 1130 "Up" : "Down. ", 1131 trunk_errmsg[link.link0.fault]); 1132 1133 if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba)) 1134 len += scnprintf(buf + len, PAGE_SIZE - len, 1135 "Trunk port 1: Link %s %s\n", 1136 (link.link1.state == LPFC_LINK_UP) ? 1137 "Up" : "Down. ", 1138 trunk_errmsg[link.link1.fault]); 1139 1140 if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba)) 1141 len += scnprintf(buf + len, PAGE_SIZE - len, 1142 "Trunk port 2: Link %s %s\n", 1143 (link.link2.state == LPFC_LINK_UP) ? 1144 "Up" : "Down. ", 1145 trunk_errmsg[link.link2.fault]); 1146 1147 if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba)) 1148 len += scnprintf(buf + len, PAGE_SIZE - len, 1149 "Trunk port 3: Link %s %s\n", 1150 (link.link3.state == LPFC_LINK_UP) ? 1151 "Up" : "Down. ", 1152 trunk_errmsg[link.link3.fault]); 1153 1154 } 1155 1156 return len; 1157 } 1158 1159 /** 1160 * lpfc_sli4_protocol_show - Return the fip mode of the HBA 1161 * @dev: class unused variable. 1162 * @attr: device attribute, not used. 1163 * @buf: on return contains the module description text. 1164 * 1165 * Returns: size of formatted string. 1166 **/ 1167 static ssize_t 1168 lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr, 1169 char *buf) 1170 { 1171 struct Scsi_Host *shost = class_to_shost(dev); 1172 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1173 struct lpfc_hba *phba = vport->phba; 1174 1175 if (phba->sli_rev < LPFC_SLI_REV4) 1176 return scnprintf(buf, PAGE_SIZE, "fc\n"); 1177 1178 if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) { 1179 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE) 1180 return scnprintf(buf, PAGE_SIZE, "fcoe\n"); 1181 if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC) 1182 return scnprintf(buf, PAGE_SIZE, "fc\n"); 1183 } 1184 return scnprintf(buf, PAGE_SIZE, "unknown\n"); 1185 } 1186 1187 /** 1188 * lpfc_oas_supported_show - Return whether or not Optimized Access Storage 1189 * (OAS) is supported. 1190 * @dev: class unused variable. 1191 * @attr: device attribute, not used. 1192 * @buf: on return contains the module description text. 1193 * 1194 * Returns: size of formatted string. 1195 **/ 1196 static ssize_t 1197 lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr, 1198 char *buf) 1199 { 1200 struct Scsi_Host *shost = class_to_shost(dev); 1201 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 1202 struct lpfc_hba *phba = vport->phba; 1203 1204 return scnprintf(buf, PAGE_SIZE, "%d\n", 1205 phba->sli4_hba.pc_sli4_params.oas_supported); 1206 } 1207 1208 /** 1209 * lpfc_link_state_store - Transition the link_state on an HBA port 1210 * @dev: class device that is converted into a Scsi_host. 1211 * @attr: device attribute, not used. 1212 * @buf: one or more lpfc_polling_flags values. 1213 * @count: not used. 1214 * 1215 * Returns: 1216 * -EINVAL if the buffer is not "up" or "down" 1217 * return from link state change function if non-zero 1218 * length of the buf on success 1219 **/ 1220 static ssize_t 1221 lpfc_link_state_store(struct device *dev, struct device_attribute *attr, 1222 const char *buf, size_t count) 1223 { 1224 struct Scsi_Host *shost = class_to_shost(dev); 1225 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1226 struct lpfc_hba *phba = vport->phba; 1227 1228 int status = -EINVAL; 1229 1230 if ((strncmp(buf, "up", sizeof("up") - 1) == 0) && 1231 (phba->link_state == LPFC_LINK_DOWN)) 1232 status = phba->lpfc_hba_init_link(phba, MBX_NOWAIT); 1233 else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) && 1234 (phba->link_state >= LPFC_LINK_UP)) 1235 status = phba->lpfc_hba_down_link(phba, MBX_NOWAIT); 1236 1237 if (status == 0) 1238 return strlen(buf); 1239 else 1240 return status; 1241 } 1242 1243 /** 1244 * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports 1245 * @dev: class device that is converted into a Scsi_host. 1246 * @attr: device attribute, not used. 1247 * @buf: on return contains the sum of fc mapped and unmapped. 1248 * 1249 * Description: 1250 * Returns the ascii text number of the sum of the fc mapped and unmapped 1251 * vport counts. 1252 * 1253 * Returns: size of formatted string. 1254 **/ 1255 static ssize_t 1256 lpfc_num_discovered_ports_show(struct device *dev, 1257 struct device_attribute *attr, char *buf) 1258 { 1259 struct Scsi_Host *shost = class_to_shost(dev); 1260 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1261 1262 return scnprintf(buf, PAGE_SIZE, "%d\n", 1263 vport->fc_map_cnt + vport->fc_unmap_cnt); 1264 } 1265 1266 /** 1267 * lpfc_issue_lip - Misnomer, name carried over from long ago 1268 * @shost: Scsi_Host pointer. 1269 * 1270 * Description: 1271 * Bring the link down gracefully then re-init the link. The firmware will 1272 * re-init the fiber channel interface as required. Does not issue a LIP. 1273 * 1274 * Returns: 1275 * -EPERM port offline or management commands are being blocked 1276 * -ENOMEM cannot allocate memory for the mailbox command 1277 * -EIO error sending the mailbox command 1278 * zero for success 1279 **/ 1280 static int 1281 lpfc_issue_lip(struct Scsi_Host *shost) 1282 { 1283 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1284 struct lpfc_hba *phba = vport->phba; 1285 LPFC_MBOXQ_t *pmboxq; 1286 int mbxstatus = MBXERR_ERROR; 1287 1288 /* 1289 * If the link is offline, disabled or BLOCK_MGMT_IO 1290 * it doesn't make any sense to allow issue_lip 1291 */ 1292 if ((vport->fc_flag & FC_OFFLINE_MODE) || 1293 (phba->hba_flag & LINK_DISABLED) || 1294 (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)) 1295 return -EPERM; 1296 1297 pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); 1298 1299 if (!pmboxq) 1300 return -ENOMEM; 1301 1302 memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); 1303 pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; 1304 pmboxq->u.mb.mbxOwner = OWN_HOST; 1305 1306 if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME)) 1307 vport->fc_flag &= ~FC_PT2PT_NO_NVME; 1308 1309 mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); 1310 1311 if ((mbxstatus == MBX_SUCCESS) && 1312 (pmboxq->u.mb.mbxStatus == 0 || 1313 pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) { 1314 memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t)); 1315 lpfc_init_link(phba, pmboxq, phba->cfg_topology, 1316 phba->cfg_link_speed); 1317 mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, 1318 phba->fc_ratov * 2); 1319 if ((mbxstatus == MBX_SUCCESS) && 1320 (pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION)) 1321 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, 1322 "2859 SLI authentication is required " 1323 "for INIT_LINK but has not done yet\n"); 1324 } 1325 1326 lpfc_set_loopback_flag(phba); 1327 if (mbxstatus != MBX_TIMEOUT) 1328 mempool_free(pmboxq, phba->mbox_mem_pool); 1329 1330 if (mbxstatus == MBXERR_ERROR) 1331 return -EIO; 1332 1333 return 0; 1334 } 1335 1336 int 1337 lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock) 1338 { 1339 int cnt = 0; 1340 1341 spin_lock_irq(lock); 1342 while (!list_empty(q)) { 1343 spin_unlock_irq(lock); 1344 msleep(20); 1345 if (cnt++ > 250) { /* 5 secs */ 1346 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, 1347 "0466 Outstanding IO when " 1348 "bringing Adapter offline\n"); 1349 return 0; 1350 } 1351 spin_lock_irq(lock); 1352 } 1353 spin_unlock_irq(lock); 1354 return 1; 1355 } 1356 1357 /** 1358 * lpfc_do_offline - Issues a mailbox command to bring the link down 1359 * @phba: lpfc_hba pointer. 1360 * @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL. 1361 * 1362 * Notes: 1363 * Assumes any error from lpfc_do_offline() will be negative. 1364 * Can wait up to 5 seconds for the port ring buffers count 1365 * to reach zero, prints a warning if it is not zero and continues. 1366 * lpfc_workq_post_event() returns a non-zero return code if call fails. 1367 * 1368 * Returns: 1369 * -EIO error posting the event 1370 * zero for success 1371 **/ 1372 static int 1373 lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) 1374 { 1375 struct completion online_compl; 1376 struct lpfc_queue *qp = NULL; 1377 struct lpfc_sli_ring *pring; 1378 struct lpfc_sli *psli; 1379 int status = 0; 1380 int i; 1381 int rc; 1382 1383 init_completion(&online_compl); 1384 rc = lpfc_workq_post_event(phba, &status, &online_compl, 1385 LPFC_EVT_OFFLINE_PREP); 1386 if (rc == 0) 1387 return -ENOMEM; 1388 1389 wait_for_completion(&online_compl); 1390 1391 if (status != 0) 1392 return -EIO; 1393 1394 psli = &phba->sli; 1395 1396 /* 1397 * If freeing the queues have already started, don't access them. 1398 * Otherwise set FREE_WAIT to indicate that queues are being used 1399 * to hold the freeing process until we finish. 1400 */ 1401 spin_lock_irq(&phba->hbalock); 1402 if (!(psli->sli_flag & LPFC_QUEUE_FREE_INIT)) { 1403 psli->sli_flag |= LPFC_QUEUE_FREE_WAIT; 1404 } else { 1405 spin_unlock_irq(&phba->hbalock); 1406 goto skip_wait; 1407 } 1408 spin_unlock_irq(&phba->hbalock); 1409 1410 /* Wait a little for things to settle down, but not 1411 * long enough for dev loss timeout to expire. 1412 */ 1413 if (phba->sli_rev != LPFC_SLI_REV4) { 1414 for (i = 0; i < psli->num_rings; i++) { 1415 pring = &psli->sli3_ring[i]; 1416 if (!lpfc_emptyq_wait(phba, &pring->txcmplq, 1417 &phba->hbalock)) 1418 goto out; 1419 } 1420 } else { 1421 list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) { 1422 pring = qp->pring; 1423 if (!pring) 1424 continue; 1425 if (!lpfc_emptyq_wait(phba, &pring->txcmplq, 1426 &pring->ring_lock)) 1427 goto out; 1428 } 1429 } 1430 out: 1431 spin_lock_irq(&phba->hbalock); 1432 psli->sli_flag &= ~LPFC_QUEUE_FREE_WAIT; 1433 spin_unlock_irq(&phba->hbalock); 1434 1435 skip_wait: 1436 init_completion(&online_compl); 1437 rc = lpfc_workq_post_event(phba, &status, &online_compl, type); 1438 if (rc == 0) 1439 return -ENOMEM; 1440 1441 wait_for_completion(&online_compl); 1442 1443 if (status != 0) 1444 return -EIO; 1445 1446 return 0; 1447 } 1448 1449 /** 1450 * lpfc_reset_pci_bus - resets PCI bridge controller's secondary bus of an HBA 1451 * @phba: lpfc_hba pointer. 1452 * 1453 * Description: 1454 * Issues a PCI secondary bus reset for the phba->pcidev. 1455 * 1456 * Notes: 1457 * First walks the bus_list to ensure only PCI devices with Emulex 1458 * vendor id, device ids that support hot reset, only one occurrence 1459 * of function 0, and all ports on the bus are in offline mode to ensure the 1460 * hot reset only affects one valid HBA. 1461 * 1462 * Returns: 1463 * -ENOTSUPP, cfg_enable_hba_reset must be of value 2 1464 * -ENODEV, NULL ptr to pcidev 1465 * -EBADSLT, detected invalid device 1466 * -EBUSY, port is not in offline state 1467 * 0, successful 1468 */ 1469 static int 1470 lpfc_reset_pci_bus(struct lpfc_hba *phba) 1471 { 1472 struct pci_dev *pdev = phba->pcidev; 1473 struct Scsi_Host *shost = NULL; 1474 struct lpfc_hba *phba_other = NULL; 1475 struct pci_dev *ptr = NULL; 1476 int res; 1477 1478 if (phba->cfg_enable_hba_reset != 2) 1479 return -ENOTSUPP; 1480 1481 if (!pdev) { 1482 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8345 pdev NULL!\n"); 1483 return -ENODEV; 1484 } 1485 1486 res = lpfc_check_pci_resettable(phba); 1487 if (res) 1488 return res; 1489 1490 /* Walk the list of devices on the pci_dev's bus */ 1491 list_for_each_entry(ptr, &pdev->bus->devices, bus_list) { 1492 /* Check port is offline */ 1493 shost = pci_get_drvdata(ptr); 1494 if (shost) { 1495 phba_other = 1496 ((struct lpfc_vport *)shost->hostdata)->phba; 1497 if (!(phba_other->pport->fc_flag & FC_OFFLINE_MODE)) { 1498 lpfc_printf_log(phba_other, KERN_INFO, LOG_INIT, 1499 "8349 WWPN = 0x%02x%02x%02x%02x" 1500 "%02x%02x%02x%02x is not " 1501 "offline!\n", 1502 phba_other->wwpn[0], 1503 phba_other->wwpn[1], 1504 phba_other->wwpn[2], 1505 phba_other->wwpn[3], 1506 phba_other->wwpn[4], 1507 phba_other->wwpn[5], 1508 phba_other->wwpn[6], 1509 phba_other->wwpn[7]); 1510 return -EBUSY; 1511 } 1512 } 1513 } 1514 1515 /* Issue PCI bus reset */ 1516 res = pci_reset_bus(pdev); 1517 if (res) { 1518 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 1519 "8350 PCI reset bus failed: %d\n", res); 1520 } 1521 1522 return res; 1523 } 1524 1525 /** 1526 * lpfc_selective_reset - Offline then onlines the port 1527 * @phba: lpfc_hba pointer. 1528 * 1529 * Description: 1530 * If the port is configured to allow a reset then the hba is brought 1531 * offline then online. 1532 * 1533 * Notes: 1534 * Assumes any error from lpfc_do_offline() will be negative. 1535 * Do not make this function static. 1536 * 1537 * Returns: 1538 * lpfc_do_offline() return code if not zero 1539 * -EIO reset not configured or error posting the event 1540 * zero for success 1541 **/ 1542 int 1543 lpfc_selective_reset(struct lpfc_hba *phba) 1544 { 1545 struct completion online_compl; 1546 int status = 0; 1547 int rc; 1548 1549 if (!phba->cfg_enable_hba_reset) 1550 return -EACCES; 1551 1552 if (!(phba->pport->fc_flag & FC_OFFLINE_MODE)) { 1553 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); 1554 1555 if (status != 0) 1556 return status; 1557 } 1558 1559 init_completion(&online_compl); 1560 rc = lpfc_workq_post_event(phba, &status, &online_compl, 1561 LPFC_EVT_ONLINE); 1562 if (rc == 0) 1563 return -ENOMEM; 1564 1565 wait_for_completion(&online_compl); 1566 1567 if (status != 0) 1568 return -EIO; 1569 1570 return 0; 1571 } 1572 1573 /** 1574 * lpfc_issue_reset - Selectively resets an adapter 1575 * @dev: class device that is converted into a Scsi_host. 1576 * @attr: device attribute, not used. 1577 * @buf: containing the string "selective". 1578 * @count: unused variable. 1579 * 1580 * Description: 1581 * If the buf contains the string "selective" then lpfc_selective_reset() 1582 * is called to perform the reset. 1583 * 1584 * Notes: 1585 * Assumes any error from lpfc_selective_reset() will be negative. 1586 * If lpfc_selective_reset() returns zero then the length of the buffer 1587 * is returned which indicates success 1588 * 1589 * Returns: 1590 * -EINVAL if the buffer does not contain the string "selective" 1591 * length of buf if lpfc-selective_reset() if the call succeeds 1592 * return value of lpfc_selective_reset() if the call fails 1593 **/ 1594 static ssize_t 1595 lpfc_issue_reset(struct device *dev, struct device_attribute *attr, 1596 const char *buf, size_t count) 1597 { 1598 struct Scsi_Host *shost = class_to_shost(dev); 1599 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1600 struct lpfc_hba *phba = vport->phba; 1601 int status = -EINVAL; 1602 1603 if (!phba->cfg_enable_hba_reset) 1604 return -EACCES; 1605 1606 if (strncmp(buf, "selective", sizeof("selective") - 1) == 0) 1607 status = phba->lpfc_selective_reset(phba); 1608 1609 if (status == 0) 1610 return strlen(buf); 1611 else 1612 return status; 1613 } 1614 1615 /** 1616 * lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness 1617 * @phba: lpfc_hba pointer. 1618 * 1619 * Description: 1620 * SLI4 interface type-2 device to wait on the sliport status register for 1621 * the readyness after performing a firmware reset. 1622 * 1623 * Returns: 1624 * zero for success, -EPERM when port does not have privilege to perform the 1625 * reset, -EIO when port timeout from recovering from the reset. 1626 * 1627 * Note: 1628 * As the caller will interpret the return code by value, be careful in making 1629 * change or addition to return codes. 1630 **/ 1631 int 1632 lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) 1633 { 1634 struct lpfc_register portstat_reg = {0}; 1635 int i; 1636 1637 msleep(100); 1638 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, 1639 &portstat_reg.word0)) 1640 return -EIO; 1641 1642 /* verify if privileged for the request operation */ 1643 if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) && 1644 !bf_get(lpfc_sliport_status_err, &portstat_reg)) 1645 return -EPERM; 1646 1647 /* wait for the SLI port firmware ready after firmware reset */ 1648 for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) { 1649 msleep(10); 1650 if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, 1651 &portstat_reg.word0)) 1652 continue; 1653 if (!bf_get(lpfc_sliport_status_err, &portstat_reg)) 1654 continue; 1655 if (!bf_get(lpfc_sliport_status_rn, &portstat_reg)) 1656 continue; 1657 if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg)) 1658 continue; 1659 break; 1660 } 1661 1662 if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT) 1663 return 0; 1664 else 1665 return -EIO; 1666 } 1667 1668 /** 1669 * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc 1670 * @phba: lpfc_hba pointer. 1671 * @opcode: The sli4 config command opcode. 1672 * 1673 * Description: 1674 * Request SLI4 interface type-2 device to perform a physical register set 1675 * access. 1676 * 1677 * Returns: 1678 * zero for success 1679 **/ 1680 static ssize_t 1681 lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) 1682 { 1683 struct completion online_compl; 1684 struct pci_dev *pdev = phba->pcidev; 1685 uint32_t before_fc_flag; 1686 uint32_t sriov_nr_virtfn; 1687 uint32_t reg_val; 1688 int status = 0, rc = 0; 1689 int job_posted = 1, sriov_err; 1690 1691 if (!phba->cfg_enable_hba_reset) 1692 return -EACCES; 1693 1694 if ((phba->sli_rev < LPFC_SLI_REV4) || 1695 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) < 1696 LPFC_SLI_INTF_IF_TYPE_2)) 1697 return -EPERM; 1698 1699 /* Keep state if we need to restore back */ 1700 before_fc_flag = phba->pport->fc_flag; 1701 sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn; 1702 1703 if (opcode == LPFC_FW_DUMP) { 1704 init_completion(&online_compl); 1705 phba->fw_dump_cmpl = &online_compl; 1706 } else { 1707 /* Disable SR-IOV virtual functions if enabled */ 1708 if (phba->cfg_sriov_nr_virtfn) { 1709 pci_disable_sriov(pdev); 1710 phba->cfg_sriov_nr_virtfn = 0; 1711 } 1712 1713 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); 1714 1715 if (status != 0) 1716 return status; 1717 1718 /* wait for the device to be quiesced before firmware reset */ 1719 msleep(100); 1720 } 1721 1722 reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + 1723 LPFC_CTL_PDEV_CTL_OFFSET); 1724 1725 if (opcode == LPFC_FW_DUMP) 1726 reg_val |= LPFC_FW_DUMP_REQUEST; 1727 else if (opcode == LPFC_FW_RESET) 1728 reg_val |= LPFC_CTL_PDEV_CTL_FRST; 1729 else if (opcode == LPFC_DV_RESET) 1730 reg_val |= LPFC_CTL_PDEV_CTL_DRST; 1731 1732 writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + 1733 LPFC_CTL_PDEV_CTL_OFFSET); 1734 /* flush */ 1735 readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); 1736 1737 /* delay driver action following IF_TYPE_2 reset */ 1738 rc = lpfc_sli4_pdev_status_reg_wait(phba); 1739 1740 if (rc == -EPERM) { 1741 /* no privilege for reset */ 1742 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, 1743 "3150 No privilege to perform the requested " 1744 "access: x%x\n", reg_val); 1745 } else if (rc == -EIO) { 1746 /* reset failed, there is nothing more we can do */ 1747 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, 1748 "3153 Fail to perform the requested " 1749 "access: x%x\n", reg_val); 1750 if (phba->fw_dump_cmpl) 1751 phba->fw_dump_cmpl = NULL; 1752 return rc; 1753 } 1754 1755 /* keep the original port state */ 1756 if (before_fc_flag & FC_OFFLINE_MODE) { 1757 if (phba->fw_dump_cmpl) 1758 phba->fw_dump_cmpl = NULL; 1759 goto out; 1760 } 1761 1762 /* Firmware dump will trigger an HA_ERATT event, and 1763 * lpfc_handle_eratt_s4 routine already handles bringing the port back 1764 * online. 1765 */ 1766 if (opcode == LPFC_FW_DUMP) { 1767 wait_for_completion(phba->fw_dump_cmpl); 1768 } else { 1769 init_completion(&online_compl); 1770 job_posted = lpfc_workq_post_event(phba, &status, &online_compl, 1771 LPFC_EVT_ONLINE); 1772 if (!job_posted) 1773 goto out; 1774 1775 wait_for_completion(&online_compl); 1776 } 1777 out: 1778 /* in any case, restore the virtual functions enabled as before */ 1779 if (sriov_nr_virtfn) { 1780 /* If fw_dump was performed, first disable to clean up */ 1781 if (opcode == LPFC_FW_DUMP) { 1782 pci_disable_sriov(pdev); 1783 phba->cfg_sriov_nr_virtfn = 0; 1784 } 1785 1786 sriov_err = 1787 lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn); 1788 if (!sriov_err) 1789 phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn; 1790 } 1791 1792 /* return proper error code */ 1793 if (!rc) { 1794 if (!job_posted) 1795 rc = -ENOMEM; 1796 else if (status) 1797 rc = -EIO; 1798 } 1799 return rc; 1800 } 1801 1802 /** 1803 * lpfc_nport_evt_cnt_show - Return the number of nport events 1804 * @dev: class device that is converted into a Scsi_host. 1805 * @attr: device attribute, not used. 1806 * @buf: on return contains the ascii number of nport events. 1807 * 1808 * Returns: size of formatted string. 1809 **/ 1810 static ssize_t 1811 lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr, 1812 char *buf) 1813 { 1814 struct Scsi_Host *shost = class_to_shost(dev); 1815 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1816 struct lpfc_hba *phba = vport->phba; 1817 1818 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt); 1819 } 1820 1821 static int 1822 lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out) 1823 { 1824 LPFC_MBOXQ_t *mbox = NULL; 1825 unsigned long val = 0; 1826 char *pval = NULL; 1827 int rc = 0; 1828 1829 if (!strncmp("enable", buff_out, 1830 strlen("enable"))) { 1831 pval = buff_out + strlen("enable") + 1; 1832 rc = kstrtoul(pval, 0, &val); 1833 if (rc) 1834 return rc; /* Invalid number */ 1835 } else if (!strncmp("disable", buff_out, 1836 strlen("disable"))) { 1837 val = 0; 1838 } else { 1839 return -EINVAL; /* Invalid command */ 1840 } 1841 1842 switch (val) { 1843 case 0: 1844 val = 0x0; /* Disable */ 1845 break; 1846 case 2: 1847 val = 0x1; /* Enable two port trunk */ 1848 break; 1849 case 4: 1850 val = 0x2; /* Enable four port trunk */ 1851 break; 1852 default: 1853 return -EINVAL; 1854 } 1855 1856 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 1857 "0070 Set trunk mode with val %ld ", val); 1858 1859 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 1860 if (!mbox) 1861 return -ENOMEM; 1862 1863 lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, 1864 LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE, 1865 12, LPFC_SLI4_MBX_EMBED); 1866 1867 bf_set(lpfc_mbx_set_trunk_mode, 1868 &mbox->u.mqe.un.set_trunk_mode, 1869 val); 1870 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); 1871 if (rc) 1872 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, 1873 "0071 Set trunk mode failed with status: %d", 1874 rc); 1875 mempool_free(mbox, phba->mbox_mem_pool); 1876 1877 return 0; 1878 } 1879 1880 static ssize_t 1881 lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr, 1882 char *buf) 1883 { 1884 struct Scsi_Host *shost = class_to_shost(dev); 1885 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 1886 struct lpfc_hba *phba = vport->phba; 1887 int rc; 1888 int len = 0; 1889 struct lpfc_rdp_context *rdp_context; 1890 u16 temperature; 1891 u16 rx_power; 1892 u16 tx_bias; 1893 u16 tx_power; 1894 u16 vcc; 1895 char chbuf[128]; 1896 u16 wavelength = 0; 1897 struct sff_trasnceiver_codes_byte7 *trasn_code_byte7; 1898 1899 /* Get transceiver information */ 1900 rdp_context = kmalloc(sizeof(*rdp_context), GFP_KERNEL); 1901 1902 rc = lpfc_get_sfp_info_wait(phba, rdp_context); 1903 if (rc) { 1904 len = scnprintf(buf, PAGE_SIZE - len, "SFP info NA:\n"); 1905 goto out_free_rdp; 1906 } 1907 1908 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16); 1909 1910 len = scnprintf(buf, PAGE_SIZE - len, "VendorName:\t%s\n", chbuf); 1911 len += scnprintf(buf + len, PAGE_SIZE - len, 1912 "VendorOUI:\t%02x-%02x-%02x\n", 1913 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI], 1914 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 1], 1915 (uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 2]); 1916 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16); 1917 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorPN:\t%s\n", chbuf); 1918 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16); 1919 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorSN:\t%s\n", chbuf); 1920 strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4); 1921 len += scnprintf(buf + len, PAGE_SIZE - len, "VendorRev:\t%s\n", chbuf); 1922 strscpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8); 1923 len += scnprintf(buf + len, PAGE_SIZE - len, "DateCode:\t%s\n", chbuf); 1924 len += scnprintf(buf + len, PAGE_SIZE - len, "Identifier:\t%xh\n", 1925 (uint8_t)rdp_context->page_a0[SSF_IDENTIFIER]); 1926 len += scnprintf(buf + len, PAGE_SIZE - len, "ExtIdentifier:\t%xh\n", 1927 (uint8_t)rdp_context->page_a0[SSF_EXT_IDENTIFIER]); 1928 len += scnprintf(buf + len, PAGE_SIZE - len, "Connector:\t%xh\n", 1929 (uint8_t)rdp_context->page_a0[SSF_CONNECTOR]); 1930 wavelength = (rdp_context->page_a0[SSF_WAVELENGTH_B1] << 8) | 1931 rdp_context->page_a0[SSF_WAVELENGTH_B0]; 1932 1933 len += scnprintf(buf + len, PAGE_SIZE - len, "Wavelength:\t%d nm\n", 1934 wavelength); 1935 trasn_code_byte7 = (struct sff_trasnceiver_codes_byte7 *) 1936 &rdp_context->page_a0[SSF_TRANSCEIVER_CODE_B7]; 1937 1938 len += scnprintf(buf + len, PAGE_SIZE - len, "Speeds: \t"); 1939 if (*(uint8_t *)trasn_code_byte7 == 0) { 1940 len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n"); 1941 } else { 1942 if (trasn_code_byte7->fc_sp_100MB) 1943 len += scnprintf(buf + len, PAGE_SIZE - len, "1 "); 1944 if (trasn_code_byte7->fc_sp_200mb) 1945 len += scnprintf(buf + len, PAGE_SIZE - len, "2 "); 1946 if (trasn_code_byte7->fc_sp_400MB) 1947 len += scnprintf(buf + len, PAGE_SIZE - len, "4 "); 1948 if (trasn_code_byte7->fc_sp_800MB) 1949 len += scnprintf(buf + len, PAGE_SIZE - len, "8 "); 1950 if (trasn_code_byte7->fc_sp_1600MB) 1951 len += scnprintf(buf + len, PAGE_SIZE - len, "16 "); 1952 if (trasn_code_byte7->fc_sp_3200MB) 1953 len += scnprintf(buf + len, PAGE_SIZE - len, "32 "); 1954 if (trasn_code_byte7->speed_chk_ecc) 1955 len += scnprintf(buf + len, PAGE_SIZE - len, "64 "); 1956 len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n"); 1957 } 1958 temperature = (rdp_context->page_a2[SFF_TEMPERATURE_B1] << 8 | 1959 rdp_context->page_a2[SFF_TEMPERATURE_B0]); 1960 vcc = (rdp_context->page_a2[SFF_VCC_B1] << 8 | 1961 rdp_context->page_a2[SFF_VCC_B0]); 1962 tx_power = (rdp_context->page_a2[SFF_TXPOWER_B1] << 8 | 1963 rdp_context->page_a2[SFF_TXPOWER_B0]); 1964 tx_bias = (rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B1] << 8 | 1965 rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B0]); 1966 rx_power = (rdp_context->page_a2[SFF_RXPOWER_B1] << 8 | 1967 rdp_context->page_a2[SFF_RXPOWER_B0]); 1968 1969 len += scnprintf(buf + len, PAGE_SIZE - len, 1970 "Temperature:\tx%04x C\n", temperature); 1971 len += scnprintf(buf + len, PAGE_SIZE - len, "Vcc:\t\tx%04x V\n", vcc); 1972 len += scnprintf(buf + len, PAGE_SIZE - len, 1973 "TxBiasCurrent:\tx%04x mA\n", tx_bias); 1974 len += scnprintf(buf + len, PAGE_SIZE - len, "TxPower:\tx%04x mW\n", 1975 tx_power); 1976 len += scnprintf(buf + len, PAGE_SIZE - len, "RxPower:\tx%04x mW\n", 1977 rx_power); 1978 out_free_rdp: 1979 kfree(rdp_context); 1980 return len; 1981 } 1982 1983 /** 1984 * lpfc_board_mode_show - Return the state of the board 1985 * @dev: class device that is converted into a Scsi_host. 1986 * @attr: device attribute, not used. 1987 * @buf: on return contains the state of the adapter. 1988 * 1989 * Returns: size of formatted string. 1990 **/ 1991 static ssize_t 1992 lpfc_board_mode_show(struct device *dev, struct device_attribute *attr, 1993 char *buf) 1994 { 1995 struct Scsi_Host *shost = class_to_shost(dev); 1996 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 1997 struct lpfc_hba *phba = vport->phba; 1998 char * state; 1999 2000 if (phba->link_state == LPFC_HBA_ERROR) 2001 state = "error"; 2002 else if (phba->link_state == LPFC_WARM_START) 2003 state = "warm start"; 2004 else if (phba->link_state == LPFC_INIT_START) 2005 state = "offline"; 2006 else 2007 state = "online"; 2008 2009 return scnprintf(buf, PAGE_SIZE, "%s\n", state); 2010 } 2011 2012 /** 2013 * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state 2014 * @dev: class device that is converted into a Scsi_host. 2015 * @attr: device attribute, not used. 2016 * @buf: containing one of the strings "online", "offline", "warm" or "error". 2017 * @count: unused variable. 2018 * 2019 * Returns: 2020 * -EACCES if enable hba reset not enabled 2021 * -EINVAL if the buffer does not contain a valid string (see above) 2022 * -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails 2023 * buf length greater than zero indicates success 2024 **/ 2025 static ssize_t 2026 lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, 2027 const char *buf, size_t count) 2028 { 2029 struct Scsi_Host *shost = class_to_shost(dev); 2030 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2031 struct lpfc_hba *phba = vport->phba; 2032 struct completion online_compl; 2033 char *board_mode_str = NULL; 2034 int status = 0; 2035 int rc; 2036 2037 if (!phba->cfg_enable_hba_reset) { 2038 status = -EACCES; 2039 goto board_mode_out; 2040 } 2041 2042 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 2043 "3050 lpfc_board_mode set to %s\n", buf); 2044 2045 init_completion(&online_compl); 2046 2047 if(strncmp(buf, "online", sizeof("online") - 1) == 0) { 2048 rc = lpfc_workq_post_event(phba, &status, &online_compl, 2049 LPFC_EVT_ONLINE); 2050 if (rc == 0) { 2051 status = -ENOMEM; 2052 goto board_mode_out; 2053 } 2054 wait_for_completion(&online_compl); 2055 if (status) 2056 status = -EIO; 2057 } else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) 2058 status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); 2059 else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0) 2060 if (phba->sli_rev == LPFC_SLI_REV4) 2061 status = -EINVAL; 2062 else 2063 status = lpfc_do_offline(phba, LPFC_EVT_WARM_START); 2064 else if (strncmp(buf, "error", sizeof("error") - 1) == 0) 2065 if (phba->sli_rev == LPFC_SLI_REV4) 2066 status = -EINVAL; 2067 else 2068 status = lpfc_do_offline(phba, LPFC_EVT_KILL); 2069 else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) 2070 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); 2071 else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) 2072 status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); 2073 else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) 2074 status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); 2075 else if (strncmp(buf, "pci_bus_reset", sizeof("pci_bus_reset") - 1) 2076 == 0) 2077 status = lpfc_reset_pci_bus(phba); 2078 else if (strncmp(buf, "heartbeat", sizeof("heartbeat") - 1) == 0) 2079 lpfc_issue_hb_tmo(phba); 2080 else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0) 2081 status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk")); 2082 else 2083 status = -EINVAL; 2084 2085 board_mode_out: 2086 if (!status) 2087 return strlen(buf); 2088 else { 2089 board_mode_str = strchr(buf, '\n'); 2090 if (board_mode_str) 2091 *board_mode_str = '\0'; 2092 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 2093 "3097 Failed \"%s\", status(%d), " 2094 "fc_flag(x%x)\n", 2095 buf, status, phba->pport->fc_flag); 2096 return status; 2097 } 2098 } 2099 2100 /** 2101 * lpfc_get_hba_info - Return various bits of informaton about the adapter 2102 * @phba: pointer to the adapter structure. 2103 * @mxri: max xri count. 2104 * @axri: available xri count. 2105 * @mrpi: max rpi count. 2106 * @arpi: available rpi count. 2107 * @mvpi: max vpi count. 2108 * @avpi: available vpi count. 2109 * 2110 * Description: 2111 * If an integer pointer for an count is not null then the value for the 2112 * count is returned. 2113 * 2114 * Returns: 2115 * zero on error 2116 * one for success 2117 **/ 2118 static int 2119 lpfc_get_hba_info(struct lpfc_hba *phba, 2120 uint32_t *mxri, uint32_t *axri, 2121 uint32_t *mrpi, uint32_t *arpi, 2122 uint32_t *mvpi, uint32_t *avpi) 2123 { 2124 struct lpfc_mbx_read_config *rd_config; 2125 LPFC_MBOXQ_t *pmboxq; 2126 MAILBOX_t *pmb; 2127 int rc = 0; 2128 uint32_t max_vpi; 2129 2130 /* 2131 * prevent udev from issuing mailbox commands until the port is 2132 * configured. 2133 */ 2134 if (phba->link_state < LPFC_LINK_DOWN || 2135 !phba->mbox_mem_pool || 2136 (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0) 2137 return 0; 2138 2139 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) 2140 return 0; 2141 2142 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 2143 if (!pmboxq) 2144 return 0; 2145 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); 2146 2147 pmb = &pmboxq->u.mb; 2148 pmb->mbxCommand = MBX_READ_CONFIG; 2149 pmb->mbxOwner = OWN_HOST; 2150 pmboxq->ctx_buf = NULL; 2151 2152 if (phba->pport->fc_flag & FC_OFFLINE_MODE) 2153 rc = MBX_NOT_FINISHED; 2154 else 2155 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); 2156 2157 if (rc != MBX_SUCCESS) { 2158 if (rc != MBX_TIMEOUT) 2159 mempool_free(pmboxq, phba->mbox_mem_pool); 2160 return 0; 2161 } 2162 2163 if (phba->sli_rev == LPFC_SLI_REV4) { 2164 rd_config = &pmboxq->u.mqe.un.rd_config; 2165 if (mrpi) 2166 *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config); 2167 if (arpi) 2168 *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) - 2169 phba->sli4_hba.max_cfg_param.rpi_used; 2170 if (mxri) 2171 *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config); 2172 if (axri) 2173 *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) - 2174 phba->sli4_hba.max_cfg_param.xri_used; 2175 2176 /* Account for differences with SLI-3. Get vpi count from 2177 * mailbox data and subtract one for max vpi value. 2178 */ 2179 max_vpi = (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) > 0) ? 2180 (bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) - 1) : 0; 2181 2182 /* Limit the max we support */ 2183 if (max_vpi > LPFC_MAX_VPI) 2184 max_vpi = LPFC_MAX_VPI; 2185 if (mvpi) 2186 *mvpi = max_vpi; 2187 if (avpi) 2188 *avpi = max_vpi - phba->sli4_hba.max_cfg_param.vpi_used; 2189 } else { 2190 if (mrpi) 2191 *mrpi = pmb->un.varRdConfig.max_rpi; 2192 if (arpi) 2193 *arpi = pmb->un.varRdConfig.avail_rpi; 2194 if (mxri) 2195 *mxri = pmb->un.varRdConfig.max_xri; 2196 if (axri) 2197 *axri = pmb->un.varRdConfig.avail_xri; 2198 if (mvpi) 2199 *mvpi = pmb->un.varRdConfig.max_vpi; 2200 if (avpi) { 2201 /* avail_vpi is only valid if link is up and ready */ 2202 if (phba->link_state == LPFC_HBA_READY) 2203 *avpi = pmb->un.varRdConfig.avail_vpi; 2204 else 2205 *avpi = pmb->un.varRdConfig.max_vpi; 2206 } 2207 } 2208 2209 mempool_free(pmboxq, phba->mbox_mem_pool); 2210 return 1; 2211 } 2212 2213 /** 2214 * lpfc_max_rpi_show - Return maximum rpi 2215 * @dev: class device that is converted into a Scsi_host. 2216 * @attr: device attribute, not used. 2217 * @buf: on return contains the maximum rpi count in decimal or "Unknown". 2218 * 2219 * Description: 2220 * Calls lpfc_get_hba_info() asking for just the mrpi count. 2221 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2222 * to "Unknown" and the buffer length is returned, therefore the caller 2223 * must check for "Unknown" in the buffer to detect a failure. 2224 * 2225 * Returns: size of formatted string. 2226 **/ 2227 static ssize_t 2228 lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr, 2229 char *buf) 2230 { 2231 struct Scsi_Host *shost = class_to_shost(dev); 2232 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2233 struct lpfc_hba *phba = vport->phba; 2234 uint32_t cnt; 2235 2236 if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL, NULL, NULL)) 2237 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); 2238 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2239 } 2240 2241 /** 2242 * lpfc_used_rpi_show - Return maximum rpi minus available rpi 2243 * @dev: class device that is converted into a Scsi_host. 2244 * @attr: device attribute, not used. 2245 * @buf: containing the used rpi count in decimal or "Unknown". 2246 * 2247 * Description: 2248 * Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts. 2249 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2250 * to "Unknown" and the buffer length is returned, therefore the caller 2251 * must check for "Unknown" in the buffer to detect a failure. 2252 * 2253 * Returns: size of formatted string. 2254 **/ 2255 static ssize_t 2256 lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr, 2257 char *buf) 2258 { 2259 struct Scsi_Host *shost = class_to_shost(dev); 2260 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2261 struct lpfc_hba *phba = vport->phba; 2262 uint32_t cnt, acnt; 2263 2264 if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL)) 2265 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); 2266 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2267 } 2268 2269 /** 2270 * lpfc_max_xri_show - Return maximum xri 2271 * @dev: class device that is converted into a Scsi_host. 2272 * @attr: device attribute, not used. 2273 * @buf: on return contains the maximum xri count in decimal or "Unknown". 2274 * 2275 * Description: 2276 * Calls lpfc_get_hba_info() asking for just the mrpi count. 2277 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2278 * to "Unknown" and the buffer length is returned, therefore the caller 2279 * must check for "Unknown" in the buffer to detect a failure. 2280 * 2281 * Returns: size of formatted string. 2282 **/ 2283 static ssize_t 2284 lpfc_max_xri_show(struct device *dev, struct device_attribute *attr, 2285 char *buf) 2286 { 2287 struct Scsi_Host *shost = class_to_shost(dev); 2288 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2289 struct lpfc_hba *phba = vport->phba; 2290 uint32_t cnt; 2291 2292 if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL, NULL, NULL)) 2293 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); 2294 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2295 } 2296 2297 /** 2298 * lpfc_used_xri_show - Return maximum xpi minus the available xpi 2299 * @dev: class device that is converted into a Scsi_host. 2300 * @attr: device attribute, not used. 2301 * @buf: on return contains the used xri count in decimal or "Unknown". 2302 * 2303 * Description: 2304 * Calls lpfc_get_hba_info() asking for just the mxri and axri counts. 2305 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2306 * to "Unknown" and the buffer length is returned, therefore the caller 2307 * must check for "Unknown" in the buffer to detect a failure. 2308 * 2309 * Returns: size of formatted string. 2310 **/ 2311 static ssize_t 2312 lpfc_used_xri_show(struct device *dev, struct device_attribute *attr, 2313 char *buf) 2314 { 2315 struct Scsi_Host *shost = class_to_shost(dev); 2316 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2317 struct lpfc_hba *phba = vport->phba; 2318 uint32_t cnt, acnt; 2319 2320 if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL)) 2321 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); 2322 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2323 } 2324 2325 /** 2326 * lpfc_max_vpi_show - Return maximum vpi 2327 * @dev: class device that is converted into a Scsi_host. 2328 * @attr: device attribute, not used. 2329 * @buf: on return contains the maximum vpi count in decimal or "Unknown". 2330 * 2331 * Description: 2332 * Calls lpfc_get_hba_info() asking for just the mvpi count. 2333 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2334 * to "Unknown" and the buffer length is returned, therefore the caller 2335 * must check for "Unknown" in the buffer to detect a failure. 2336 * 2337 * Returns: size of formatted string. 2338 **/ 2339 static ssize_t 2340 lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr, 2341 char *buf) 2342 { 2343 struct Scsi_Host *shost = class_to_shost(dev); 2344 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2345 struct lpfc_hba *phba = vport->phba; 2346 uint32_t cnt; 2347 2348 if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, NULL)) 2349 return scnprintf(buf, PAGE_SIZE, "%d\n", cnt); 2350 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2351 } 2352 2353 /** 2354 * lpfc_used_vpi_show - Return maximum vpi minus the available vpi 2355 * @dev: class device that is converted into a Scsi_host. 2356 * @attr: device attribute, not used. 2357 * @buf: on return contains the used vpi count in decimal or "Unknown". 2358 * 2359 * Description: 2360 * Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts. 2361 * If lpfc_get_hba_info() returns zero (failure) the buffer text is set 2362 * to "Unknown" and the buffer length is returned, therefore the caller 2363 * must check for "Unknown" in the buffer to detect a failure. 2364 * 2365 * Returns: size of formatted string. 2366 **/ 2367 static ssize_t 2368 lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr, 2369 char *buf) 2370 { 2371 struct Scsi_Host *shost = class_to_shost(dev); 2372 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2373 struct lpfc_hba *phba = vport->phba; 2374 uint32_t cnt, acnt; 2375 2376 if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt)) 2377 return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt)); 2378 return scnprintf(buf, PAGE_SIZE, "Unknown\n"); 2379 } 2380 2381 /** 2382 * lpfc_npiv_info_show - Return text about NPIV support for the adapter 2383 * @dev: class device that is converted into a Scsi_host. 2384 * @attr: device attribute, not used. 2385 * @buf: text that must be interpreted to determine if npiv is supported. 2386 * 2387 * Description: 2388 * Buffer will contain text indicating npiv is not suppoerted on the port, 2389 * the port is an NPIV physical port, or it is an npiv virtual port with 2390 * the id of the vport. 2391 * 2392 * Returns: size of formatted string. 2393 **/ 2394 static ssize_t 2395 lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr, 2396 char *buf) 2397 { 2398 struct Scsi_Host *shost = class_to_shost(dev); 2399 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2400 struct lpfc_hba *phba = vport->phba; 2401 2402 if (!(phba->max_vpi)) 2403 return scnprintf(buf, PAGE_SIZE, "NPIV Not Supported\n"); 2404 if (vport->port_type == LPFC_PHYSICAL_PORT) 2405 return scnprintf(buf, PAGE_SIZE, "NPIV Physical\n"); 2406 return scnprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi); 2407 } 2408 2409 /** 2410 * lpfc_poll_show - Return text about poll support for the adapter 2411 * @dev: class device that is converted into a Scsi_host. 2412 * @attr: device attribute, not used. 2413 * @buf: on return contains the cfg_poll in hex. 2414 * 2415 * Notes: 2416 * cfg_poll should be a lpfc_polling_flags type. 2417 * 2418 * Returns: size of formatted string. 2419 **/ 2420 static ssize_t 2421 lpfc_poll_show(struct device *dev, struct device_attribute *attr, 2422 char *buf) 2423 { 2424 struct Scsi_Host *shost = class_to_shost(dev); 2425 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2426 struct lpfc_hba *phba = vport->phba; 2427 2428 return scnprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll); 2429 } 2430 2431 /** 2432 * lpfc_poll_store - Set the value of cfg_poll for the adapter 2433 * @dev: class device that is converted into a Scsi_host. 2434 * @attr: device attribute, not used. 2435 * @buf: one or more lpfc_polling_flags values. 2436 * @count: not used. 2437 * 2438 * Notes: 2439 * buf contents converted to integer and checked for a valid value. 2440 * 2441 * Returns: 2442 * -EINVAL if the buffer connot be converted or is out of range 2443 * length of the buf on success 2444 **/ 2445 static ssize_t 2446 lpfc_poll_store(struct device *dev, struct device_attribute *attr, 2447 const char *buf, size_t count) 2448 { 2449 struct Scsi_Host *shost = class_to_shost(dev); 2450 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2451 struct lpfc_hba *phba = vport->phba; 2452 uint32_t creg_val; 2453 uint32_t old_val; 2454 int val=0; 2455 2456 if (!isdigit(buf[0])) 2457 return -EINVAL; 2458 2459 if (sscanf(buf, "%i", &val) != 1) 2460 return -EINVAL; 2461 2462 if ((val & 0x3) != val) 2463 return -EINVAL; 2464 2465 if (phba->sli_rev == LPFC_SLI_REV4) 2466 val = 0; 2467 2468 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 2469 "3051 lpfc_poll changed from %d to %d\n", 2470 phba->cfg_poll, val); 2471 2472 spin_lock_irq(&phba->hbalock); 2473 2474 old_val = phba->cfg_poll; 2475 2476 if (val & ENABLE_FCP_RING_POLLING) { 2477 if ((val & DISABLE_FCP_RING_INT) && 2478 !(old_val & DISABLE_FCP_RING_INT)) { 2479 if (lpfc_readl(phba->HCregaddr, &creg_val)) { 2480 spin_unlock_irq(&phba->hbalock); 2481 return -EINVAL; 2482 } 2483 creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING); 2484 writel(creg_val, phba->HCregaddr); 2485 readl(phba->HCregaddr); /* flush */ 2486 2487 lpfc_poll_start_timer(phba); 2488 } 2489 } else if (val != 0x0) { 2490 spin_unlock_irq(&phba->hbalock); 2491 return -EINVAL; 2492 } 2493 2494 if (!(val & DISABLE_FCP_RING_INT) && 2495 (old_val & DISABLE_FCP_RING_INT)) 2496 { 2497 spin_unlock_irq(&phba->hbalock); 2498 del_timer(&phba->fcp_poll_timer); 2499 spin_lock_irq(&phba->hbalock); 2500 if (lpfc_readl(phba->HCregaddr, &creg_val)) { 2501 spin_unlock_irq(&phba->hbalock); 2502 return -EINVAL; 2503 } 2504 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); 2505 writel(creg_val, phba->HCregaddr); 2506 readl(phba->HCregaddr); /* flush */ 2507 } 2508 2509 phba->cfg_poll = val; 2510 2511 spin_unlock_irq(&phba->hbalock); 2512 2513 return strlen(buf); 2514 } 2515 2516 /** 2517 * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions 2518 * @dev: class converted to a Scsi_host structure. 2519 * @attr: device attribute, not used. 2520 * @buf: on return contains the formatted support level. 2521 * 2522 * Description: 2523 * Returns the maximum number of virtual functions a physical function can 2524 * support, 0 will be returned if called on virtual function. 2525 * 2526 * Returns: size of formatted string. 2527 **/ 2528 static ssize_t 2529 lpfc_sriov_hw_max_virtfn_show(struct device *dev, 2530 struct device_attribute *attr, 2531 char *buf) 2532 { 2533 struct Scsi_Host *shost = class_to_shost(dev); 2534 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 2535 struct lpfc_hba *phba = vport->phba; 2536 uint16_t max_nr_virtfn; 2537 2538 max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba); 2539 return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); 2540 } 2541 2542 /** 2543 * lpfc_enable_bbcr_set: Sets an attribute value. 2544 * @phba: pointer to the adapter structure. 2545 * @val: integer attribute value. 2546 * 2547 * Description: 2548 * Validates the min and max values then sets the 2549 * adapter config field if in the valid range. prints error message 2550 * and does not set the parameter if invalid. 2551 * 2552 * Returns: 2553 * zero on success 2554 * -EINVAL if val is invalid 2555 */ 2556 static ssize_t 2557 lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val) 2558 { 2559 if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) { 2560 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 2561 "3068 lpfc_enable_bbcr changed from %d to " 2562 "%d\n", phba->cfg_enable_bbcr, val); 2563 phba->cfg_enable_bbcr = val; 2564 return 0; 2565 } 2566 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 2567 "0451 lpfc_enable_bbcr cannot set to %d, range is 0, " 2568 "1\n", val); 2569 return -EINVAL; 2570 } 2571 2572 /* 2573 * lpfc_param_show - Return a cfg attribute value in decimal 2574 * 2575 * Description: 2576 * Macro that given an attr e.g. hba_queue_depth expands 2577 * into a function with the name lpfc_hba_queue_depth_show. 2578 * 2579 * lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field. 2580 * @dev: class device that is converted into a Scsi_host. 2581 * @attr: device attribute, not used. 2582 * @buf: on return contains the attribute value in decimal. 2583 * 2584 * Returns: size of formatted string. 2585 **/ 2586 #define lpfc_param_show(attr) \ 2587 static ssize_t \ 2588 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ 2589 char *buf) \ 2590 { \ 2591 struct Scsi_Host *shost = class_to_shost(dev);\ 2592 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2593 struct lpfc_hba *phba = vport->phba;\ 2594 return scnprintf(buf, PAGE_SIZE, "%d\n",\ 2595 phba->cfg_##attr);\ 2596 } 2597 2598 /* 2599 * lpfc_param_hex_show - Return a cfg attribute value in hex 2600 * 2601 * Description: 2602 * Macro that given an attr e.g. hba_queue_depth expands 2603 * into a function with the name lpfc_hba_queue_depth_show 2604 * 2605 * lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field. 2606 * @dev: class device that is converted into a Scsi_host. 2607 * @attr: device attribute, not used. 2608 * @buf: on return contains the attribute value in hexadecimal. 2609 * 2610 * Returns: size of formatted string. 2611 **/ 2612 #define lpfc_param_hex_show(attr) \ 2613 static ssize_t \ 2614 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ 2615 char *buf) \ 2616 { \ 2617 struct Scsi_Host *shost = class_to_shost(dev);\ 2618 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2619 struct lpfc_hba *phba = vport->phba;\ 2620 uint val = 0;\ 2621 val = phba->cfg_##attr;\ 2622 return scnprintf(buf, PAGE_SIZE, "%#x\n",\ 2623 phba->cfg_##attr);\ 2624 } 2625 2626 /* 2627 * lpfc_param_init - Initializes a cfg attribute 2628 * 2629 * Description: 2630 * Macro that given an attr e.g. hba_queue_depth expands 2631 * into a function with the name lpfc_hba_queue_depth_init. The macro also 2632 * takes a default argument, a minimum and maximum argument. 2633 * 2634 * lpfc_##attr##_init: Initializes an attribute. 2635 * @phba: pointer to the adapter structure. 2636 * @val: integer attribute value. 2637 * 2638 * Validates the min and max values then sets the adapter config field 2639 * accordingly, or uses the default if out of range and prints an error message. 2640 * 2641 * Returns: 2642 * zero on success 2643 * -EINVAL if default used 2644 **/ 2645 #define lpfc_param_init(attr, default, minval, maxval) \ 2646 static int \ 2647 lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \ 2648 { \ 2649 if (lpfc_rangecheck(val, minval, maxval)) {\ 2650 phba->cfg_##attr = val;\ 2651 return 0;\ 2652 }\ 2653 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ 2654 "0449 lpfc_"#attr" attribute cannot be set to %d, "\ 2655 "allowed range is ["#minval", "#maxval"]\n", val); \ 2656 phba->cfg_##attr = default;\ 2657 return -EINVAL;\ 2658 } 2659 2660 /* 2661 * lpfc_param_set - Set a cfg attribute value 2662 * 2663 * Description: 2664 * Macro that given an attr e.g. hba_queue_depth expands 2665 * into a function with the name lpfc_hba_queue_depth_set 2666 * 2667 * lpfc_##attr##_set: Sets an attribute value. 2668 * @phba: pointer to the adapter structure. 2669 * @val: integer attribute value. 2670 * 2671 * Description: 2672 * Validates the min and max values then sets the 2673 * adapter config field if in the valid range. prints error message 2674 * and does not set the parameter if invalid. 2675 * 2676 * Returns: 2677 * zero on success 2678 * -EINVAL if val is invalid 2679 **/ 2680 #define lpfc_param_set(attr, default, minval, maxval) \ 2681 static int \ 2682 lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \ 2683 { \ 2684 if (lpfc_rangecheck(val, minval, maxval)) {\ 2685 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ 2686 "3052 lpfc_" #attr " changed from %d to %d\n", \ 2687 phba->cfg_##attr, val); \ 2688 phba->cfg_##attr = val;\ 2689 return 0;\ 2690 }\ 2691 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \ 2692 "0450 lpfc_"#attr" attribute cannot be set to %d, "\ 2693 "allowed range is ["#minval", "#maxval"]\n", val); \ 2694 return -EINVAL;\ 2695 } 2696 2697 /* 2698 * lpfc_param_store - Set a vport attribute value 2699 * 2700 * Description: 2701 * Macro that given an attr e.g. hba_queue_depth expands 2702 * into a function with the name lpfc_hba_queue_depth_store. 2703 * 2704 * lpfc_##attr##_store: Set an sttribute value. 2705 * @dev: class device that is converted into a Scsi_host. 2706 * @attr: device attribute, not used. 2707 * @buf: contains the attribute value in ascii. 2708 * @count: not used. 2709 * 2710 * Description: 2711 * Convert the ascii text number to an integer, then 2712 * use the lpfc_##attr##_set function to set the value. 2713 * 2714 * Returns: 2715 * -EINVAL if val is invalid or lpfc_##attr##_set() fails 2716 * length of buffer upon success. 2717 **/ 2718 #define lpfc_param_store(attr) \ 2719 static ssize_t \ 2720 lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ 2721 const char *buf, size_t count) \ 2722 { \ 2723 struct Scsi_Host *shost = class_to_shost(dev);\ 2724 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2725 struct lpfc_hba *phba = vport->phba;\ 2726 uint val = 0;\ 2727 if (!isdigit(buf[0]))\ 2728 return -EINVAL;\ 2729 if (sscanf(buf, "%i", &val) != 1)\ 2730 return -EINVAL;\ 2731 if (lpfc_##attr##_set(phba, val) == 0) \ 2732 return strlen(buf);\ 2733 else \ 2734 return -EINVAL;\ 2735 } 2736 2737 /* 2738 * lpfc_vport_param_show - Return decimal formatted cfg attribute value 2739 * 2740 * Description: 2741 * Macro that given an attr e.g. hba_queue_depth expands 2742 * into a function with the name lpfc_hba_queue_depth_show 2743 * 2744 * lpfc_##attr##_show: prints the attribute value in decimal. 2745 * @dev: class device that is converted into a Scsi_host. 2746 * @attr: device attribute, not used. 2747 * @buf: on return contains the attribute value in decimal. 2748 * 2749 * Returns: length of formatted string. 2750 **/ 2751 #define lpfc_vport_param_show(attr) \ 2752 static ssize_t \ 2753 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ 2754 char *buf) \ 2755 { \ 2756 struct Scsi_Host *shost = class_to_shost(dev);\ 2757 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2758 return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\ 2759 } 2760 2761 /* 2762 * lpfc_vport_param_hex_show - Return hex formatted attribute value 2763 * 2764 * Description: 2765 * Macro that given an attr e.g. 2766 * hba_queue_depth expands into a function with the name 2767 * lpfc_hba_queue_depth_show 2768 * 2769 * lpfc_##attr##_show: prints the attribute value in hexadecimal. 2770 * @dev: class device that is converted into a Scsi_host. 2771 * @attr: device attribute, not used. 2772 * @buf: on return contains the attribute value in hexadecimal. 2773 * 2774 * Returns: length of formatted string. 2775 **/ 2776 #define lpfc_vport_param_hex_show(attr) \ 2777 static ssize_t \ 2778 lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ 2779 char *buf) \ 2780 { \ 2781 struct Scsi_Host *shost = class_to_shost(dev);\ 2782 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2783 return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\ 2784 } 2785 2786 /* 2787 * lpfc_vport_param_init - Initialize a vport cfg attribute 2788 * 2789 * Description: 2790 * Macro that given an attr e.g. hba_queue_depth expands 2791 * into a function with the name lpfc_hba_queue_depth_init. The macro also 2792 * takes a default argument, a minimum and maximum argument. 2793 * 2794 * lpfc_##attr##_init: validates the min and max values then sets the 2795 * adapter config field accordingly, or uses the default if out of range 2796 * and prints an error message. 2797 * @phba: pointer to the adapter structure. 2798 * @val: integer attribute value. 2799 * 2800 * Returns: 2801 * zero on success 2802 * -EINVAL if default used 2803 **/ 2804 #define lpfc_vport_param_init(attr, default, minval, maxval) \ 2805 static int \ 2806 lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \ 2807 { \ 2808 if (lpfc_rangecheck(val, minval, maxval)) {\ 2809 vport->cfg_##attr = val;\ 2810 return 0;\ 2811 }\ 2812 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ 2813 "0423 lpfc_"#attr" attribute cannot be set to %d, "\ 2814 "allowed range is ["#minval", "#maxval"]\n", val); \ 2815 vport->cfg_##attr = default;\ 2816 return -EINVAL;\ 2817 } 2818 2819 /* 2820 * lpfc_vport_param_set - Set a vport cfg attribute 2821 * 2822 * Description: 2823 * Macro that given an attr e.g. hba_queue_depth expands 2824 * into a function with the name lpfc_hba_queue_depth_set 2825 * 2826 * lpfc_##attr##_set: validates the min and max values then sets the 2827 * adapter config field if in the valid range. prints error message 2828 * and does not set the parameter if invalid. 2829 * @phba: pointer to the adapter structure. 2830 * @val: integer attribute value. 2831 * 2832 * Returns: 2833 * zero on success 2834 * -EINVAL if val is invalid 2835 **/ 2836 #define lpfc_vport_param_set(attr, default, minval, maxval) \ 2837 static int \ 2838 lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \ 2839 { \ 2840 if (lpfc_rangecheck(val, minval, maxval)) {\ 2841 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ 2842 "3053 lpfc_" #attr \ 2843 " changed from %d (x%x) to %d (x%x)\n", \ 2844 vport->cfg_##attr, vport->cfg_##attr, \ 2845 val, val); \ 2846 vport->cfg_##attr = val;\ 2847 return 0;\ 2848 }\ 2849 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \ 2850 "0424 lpfc_"#attr" attribute cannot be set to %d, "\ 2851 "allowed range is ["#minval", "#maxval"]\n", val); \ 2852 return -EINVAL;\ 2853 } 2854 2855 /* 2856 * lpfc_vport_param_store - Set a vport attribute 2857 * 2858 * Description: 2859 * Macro that given an attr e.g. hba_queue_depth 2860 * expands into a function with the name lpfc_hba_queue_depth_store 2861 * 2862 * lpfc_##attr##_store: convert the ascii text number to an integer, then 2863 * use the lpfc_##attr##_set function to set the value. 2864 * @cdev: class device that is converted into a Scsi_host. 2865 * @buf: contains the attribute value in decimal. 2866 * @count: not used. 2867 * 2868 * Returns: 2869 * -EINVAL if val is invalid or lpfc_##attr##_set() fails 2870 * length of buffer upon success. 2871 **/ 2872 #define lpfc_vport_param_store(attr) \ 2873 static ssize_t \ 2874 lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \ 2875 const char *buf, size_t count) \ 2876 { \ 2877 struct Scsi_Host *shost = class_to_shost(dev);\ 2878 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\ 2879 uint val = 0;\ 2880 if (!isdigit(buf[0]))\ 2881 return -EINVAL;\ 2882 if (sscanf(buf, "%i", &val) != 1)\ 2883 return -EINVAL;\ 2884 if (lpfc_##attr##_set(vport, val) == 0) \ 2885 return strlen(buf);\ 2886 else \ 2887 return -EINVAL;\ 2888 } 2889 2890 2891 static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL); 2892 static DEVICE_ATTR(scsi_stat, 0444, lpfc_scsi_stat_show, NULL); 2893 static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL); 2894 static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL); 2895 static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL); 2896 static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL); 2897 static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL); 2898 static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL); 2899 static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL); 2900 static DEVICE_ATTR(modelname, S_IRUGO, lpfc_modelname_show, NULL); 2901 static DEVICE_ATTR(programtype, S_IRUGO, lpfc_programtype_show, NULL); 2902 static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL); 2903 static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL); 2904 static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL); 2905 static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show, 2906 lpfc_link_state_store); 2907 static DEVICE_ATTR(option_rom_version, S_IRUGO, 2908 lpfc_option_rom_version_show, NULL); 2909 static DEVICE_ATTR(num_discovered_ports, S_IRUGO, 2910 lpfc_num_discovered_ports_show, NULL); 2911 static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL); 2912 static DEVICE_ATTR_RO(lpfc_drvr_version); 2913 static DEVICE_ATTR_RO(lpfc_enable_fip); 2914 static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR, 2915 lpfc_board_mode_show, lpfc_board_mode_store); 2916 static DEVICE_ATTR_RO(lpfc_xcvr_data); 2917 static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset); 2918 static DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL); 2919 static DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL); 2920 static DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL); 2921 static DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL); 2922 static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL); 2923 static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL); 2924 static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL); 2925 static DEVICE_ATTR_RO(lpfc_temp_sensor); 2926 static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn); 2927 static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL); 2928 static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show, 2929 NULL); 2930 static DEVICE_ATTR(cmf_info, 0444, lpfc_cmf_info_show, NULL); 2931 2932 #define WWN_SZ 8 2933 /** 2934 * lpfc_wwn_set - Convert string to the 8 byte WWN value. 2935 * @buf: WWN string. 2936 * @cnt: Length of string. 2937 * @wwn: Array to receive converted wwn value. 2938 * 2939 * Returns: 2940 * -EINVAL if the buffer does not contain a valid wwn 2941 * 0 success 2942 **/ 2943 static size_t 2944 lpfc_wwn_set(const char *buf, size_t cnt, char wwn[]) 2945 { 2946 unsigned int i, j; 2947 2948 /* Count may include a LF at end of string */ 2949 if (buf[cnt-1] == '\n') 2950 cnt--; 2951 2952 if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) || 2953 ((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x')))) 2954 return -EINVAL; 2955 2956 memset(wwn, 0, WWN_SZ); 2957 2958 /* Validate and store the new name */ 2959 for (i = 0, j = 0; i < 16; i++) { 2960 if ((*buf >= 'a') && (*buf <= 'f')) 2961 j = ((j << 4) | ((*buf++ - 'a') + 10)); 2962 else if ((*buf >= 'A') && (*buf <= 'F')) 2963 j = ((j << 4) | ((*buf++ - 'A') + 10)); 2964 else if ((*buf >= '0') && (*buf <= '9')) 2965 j = ((j << 4) | (*buf++ - '0')); 2966 else 2967 return -EINVAL; 2968 if (i % 2) { 2969 wwn[i/2] = j & 0xff; 2970 j = 0; 2971 } 2972 } 2973 return 0; 2974 } 2975 2976 2977 /** 2978 * lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for 2979 * Optimized Access Storage (OAS) operations. 2980 * @dev: class device that is converted into a Scsi_host. 2981 * @attr: device attribute, not used. 2982 * @buf: buffer for passing information. 2983 * 2984 * Returns: 2985 * value of count 2986 **/ 2987 static ssize_t 2988 lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr, 2989 char *buf) 2990 { 2991 struct Scsi_Host *shost = class_to_shost(dev); 2992 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 2993 2994 return scnprintf(buf, PAGE_SIZE, "0x%llx\n", 2995 wwn_to_u64(phba->cfg_oas_tgt_wwpn)); 2996 } 2997 2998 /** 2999 * lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for 3000 * Optimized Access Storage (OAS) operations. 3001 * @dev: class device that is converted into a Scsi_host. 3002 * @attr: device attribute, not used. 3003 * @buf: buffer for passing information. 3004 * @count: Size of the data buffer. 3005 * 3006 * Returns: 3007 * -EINVAL count is invalid, invalid wwpn byte invalid 3008 * -EPERM oas is not supported by hba 3009 * value of count on success 3010 **/ 3011 static ssize_t 3012 lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr, 3013 const char *buf, size_t count) 3014 { 3015 struct Scsi_Host *shost = class_to_shost(dev); 3016 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3017 unsigned int cnt = count; 3018 uint8_t wwpn[WWN_SZ]; 3019 int rc; 3020 3021 if (!phba->cfg_fof) 3022 return -EPERM; 3023 3024 /* count may include a LF at end of string */ 3025 if (buf[cnt-1] == '\n') 3026 cnt--; 3027 3028 rc = lpfc_wwn_set(buf, cnt, wwpn); 3029 if (rc) 3030 return rc; 3031 3032 memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); 3033 memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t))); 3034 if (wwn_to_u64(wwpn) == 0) 3035 phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET; 3036 else 3037 phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET; 3038 phba->cfg_oas_flags &= ~OAS_LUN_VALID; 3039 phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; 3040 return count; 3041 } 3042 static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR, 3043 lpfc_oas_tgt_show, lpfc_oas_tgt_store); 3044 3045 /** 3046 * lpfc_oas_priority_show - Return wwpn of target whose luns maybe enabled for 3047 * Optimized Access Storage (OAS) operations. 3048 * @dev: class device that is converted into a Scsi_host. 3049 * @attr: device attribute, not used. 3050 * @buf: buffer for passing information. 3051 * 3052 * Returns: 3053 * value of count 3054 **/ 3055 static ssize_t 3056 lpfc_oas_priority_show(struct device *dev, struct device_attribute *attr, 3057 char *buf) 3058 { 3059 struct Scsi_Host *shost = class_to_shost(dev); 3060 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3061 3062 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_priority); 3063 } 3064 3065 /** 3066 * lpfc_oas_priority_store - Store wwpn of target whose luns maybe enabled for 3067 * Optimized Access Storage (OAS) operations. 3068 * @dev: class device that is converted into a Scsi_host. 3069 * @attr: device attribute, not used. 3070 * @buf: buffer for passing information. 3071 * @count: Size of the data buffer. 3072 * 3073 * Returns: 3074 * -EINVAL count is invalid, invalid wwpn byte invalid 3075 * -EPERM oas is not supported by hba 3076 * value of count on success 3077 **/ 3078 static ssize_t 3079 lpfc_oas_priority_store(struct device *dev, struct device_attribute *attr, 3080 const char *buf, size_t count) 3081 { 3082 struct Scsi_Host *shost = class_to_shost(dev); 3083 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3084 unsigned int cnt = count; 3085 unsigned long val; 3086 int ret; 3087 3088 if (!phba->cfg_fof) 3089 return -EPERM; 3090 3091 /* count may include a LF at end of string */ 3092 if (buf[cnt-1] == '\n') 3093 cnt--; 3094 3095 ret = kstrtoul(buf, 0, &val); 3096 if (ret || (val > 0x7f)) 3097 return -EINVAL; 3098 3099 if (val) 3100 phba->cfg_oas_priority = (uint8_t)val; 3101 else 3102 phba->cfg_oas_priority = phba->cfg_XLanePriority; 3103 return count; 3104 } 3105 static DEVICE_ATTR(lpfc_xlane_priority, S_IRUGO | S_IWUSR, 3106 lpfc_oas_priority_show, lpfc_oas_priority_store); 3107 3108 /** 3109 * lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled 3110 * for Optimized Access Storage (OAS) operations. 3111 * @dev: class device that is converted into a Scsi_host. 3112 * @attr: device attribute, not used. 3113 * @buf: buffer for passing information. 3114 * 3115 * Returns: 3116 * value of count on success 3117 **/ 3118 static ssize_t 3119 lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr, 3120 char *buf) 3121 { 3122 struct Scsi_Host *shost = class_to_shost(dev); 3123 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3124 3125 return scnprintf(buf, PAGE_SIZE, "0x%llx\n", 3126 wwn_to_u64(phba->cfg_oas_vpt_wwpn)); 3127 } 3128 3129 /** 3130 * lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled 3131 * for Optimized Access Storage (OAS) operations. 3132 * @dev: class device that is converted into a Scsi_host. 3133 * @attr: device attribute, not used. 3134 * @buf: buffer for passing information. 3135 * @count: Size of the data buffer. 3136 * 3137 * Returns: 3138 * -EINVAL count is invalid, invalid wwpn byte invalid 3139 * -EPERM oas is not supported by hba 3140 * value of count on success 3141 **/ 3142 static ssize_t 3143 lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr, 3144 const char *buf, size_t count) 3145 { 3146 struct Scsi_Host *shost = class_to_shost(dev); 3147 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3148 unsigned int cnt = count; 3149 uint8_t wwpn[WWN_SZ]; 3150 int rc; 3151 3152 if (!phba->cfg_fof) 3153 return -EPERM; 3154 3155 /* count may include a LF at end of string */ 3156 if (buf[cnt-1] == '\n') 3157 cnt--; 3158 3159 rc = lpfc_wwn_set(buf, cnt, wwpn); 3160 if (rc) 3161 return rc; 3162 3163 memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); 3164 memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t))); 3165 if (wwn_to_u64(wwpn) == 0) 3166 phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT; 3167 else 3168 phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT; 3169 phba->cfg_oas_flags &= ~OAS_LUN_VALID; 3170 if (phba->cfg_oas_priority == 0) 3171 phba->cfg_oas_priority = phba->cfg_XLanePriority; 3172 phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN; 3173 return count; 3174 } 3175 static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR, 3176 lpfc_oas_vpt_show, lpfc_oas_vpt_store); 3177 3178 /** 3179 * lpfc_oas_lun_state_show - Return the current state (enabled or disabled) 3180 * of whether luns will be enabled or disabled 3181 * for Optimized Access Storage (OAS) operations. 3182 * @dev: class device that is converted into a Scsi_host. 3183 * @attr: device attribute, not used. 3184 * @buf: buffer for passing information. 3185 * 3186 * Returns: 3187 * size of formatted string. 3188 **/ 3189 static ssize_t 3190 lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr, 3191 char *buf) 3192 { 3193 struct Scsi_Host *shost = class_to_shost(dev); 3194 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3195 3196 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state); 3197 } 3198 3199 /** 3200 * lpfc_oas_lun_state_store - Store the state (enabled or disabled) 3201 * of whether luns will be enabled or disabled 3202 * for Optimized Access Storage (OAS) operations. 3203 * @dev: class device that is converted into a Scsi_host. 3204 * @attr: device attribute, not used. 3205 * @buf: buffer for passing information. 3206 * @count: Size of the data buffer. 3207 * 3208 * Returns: 3209 * -EINVAL count is invalid, invalid wwpn byte invalid 3210 * -EPERM oas is not supported by hba 3211 * value of count on success 3212 **/ 3213 static ssize_t 3214 lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr, 3215 const char *buf, size_t count) 3216 { 3217 struct Scsi_Host *shost = class_to_shost(dev); 3218 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3219 int val = 0; 3220 3221 if (!phba->cfg_fof) 3222 return -EPERM; 3223 3224 if (!isdigit(buf[0])) 3225 return -EINVAL; 3226 3227 if (sscanf(buf, "%i", &val) != 1) 3228 return -EINVAL; 3229 3230 if ((val != 0) && (val != 1)) 3231 return -EINVAL; 3232 3233 phba->cfg_oas_lun_state = val; 3234 return strlen(buf); 3235 } 3236 static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR, 3237 lpfc_oas_lun_state_show, lpfc_oas_lun_state_store); 3238 3239 /** 3240 * lpfc_oas_lun_status_show - Return the status of the Optimized Access 3241 * Storage (OAS) lun returned by the 3242 * lpfc_oas_lun_show function. 3243 * @dev: class device that is converted into a Scsi_host. 3244 * @attr: device attribute, not used. 3245 * @buf: buffer for passing information. 3246 * 3247 * Returns: 3248 * size of formatted string. 3249 **/ 3250 static ssize_t 3251 lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr, 3252 char *buf) 3253 { 3254 struct Scsi_Host *shost = class_to_shost(dev); 3255 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3256 3257 if (!(phba->cfg_oas_flags & OAS_LUN_VALID)) 3258 return -EFAULT; 3259 3260 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status); 3261 } 3262 static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO, 3263 lpfc_oas_lun_status_show, NULL); 3264 3265 3266 /** 3267 * lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage 3268 * (OAS) operations. 3269 * @phba: lpfc_hba pointer. 3270 * @vpt_wwpn: wwpn of the vport associated with the returned lun 3271 * @tgt_wwpn: wwpn of the target associated with the returned lun 3272 * @lun: the fc lun for setting oas state. 3273 * @oas_state: the oas state to be set to the lun. 3274 * @pri: priority 3275 * 3276 * Returns: 3277 * SUCCESS : 0 3278 * -EPERM OAS is not enabled or not supported by this port. 3279 * 3280 */ 3281 static size_t 3282 lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[], 3283 uint8_t tgt_wwpn[], uint64_t lun, 3284 uint32_t oas_state, uint8_t pri) 3285 { 3286 3287 int rc = 0; 3288 3289 if (!phba->cfg_fof) 3290 return -EPERM; 3291 3292 if (oas_state) { 3293 if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, 3294 (struct lpfc_name *)tgt_wwpn, 3295 lun, pri)) 3296 rc = -ENOMEM; 3297 } else { 3298 lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn, 3299 (struct lpfc_name *)tgt_wwpn, lun, pri); 3300 } 3301 return rc; 3302 3303 } 3304 3305 /** 3306 * lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized 3307 * Access Storage (OAS) operations. 3308 * @phba: lpfc_hba pointer. 3309 * @vpt_wwpn: wwpn of the vport associated with the returned lun 3310 * @tgt_wwpn: wwpn of the target associated with the returned lun 3311 * @lun_status: status of the lun returned lun 3312 * @lun_pri: priority of the lun returned lun 3313 * 3314 * Returns the first or next lun enabled for OAS operations for the vport/target 3315 * specified. If a lun is found, its vport wwpn, target wwpn and status is 3316 * returned. If the lun is not found, NOT_OAS_ENABLED_LUN is returned. 3317 * 3318 * Return: 3319 * lun that is OAS enabled for the vport/target 3320 * NOT_OAS_ENABLED_LUN when no oas enabled lun found. 3321 */ 3322 static uint64_t 3323 lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[], 3324 uint8_t tgt_wwpn[], uint32_t *lun_status, 3325 uint32_t *lun_pri) 3326 { 3327 uint64_t found_lun; 3328 3329 if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn) 3330 return NOT_OAS_ENABLED_LUN; 3331 if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *) 3332 phba->sli4_hba.oas_next_vpt_wwpn, 3333 (struct lpfc_name *) 3334 phba->sli4_hba.oas_next_tgt_wwpn, 3335 &phba->sli4_hba.oas_next_lun, 3336 (struct lpfc_name *)vpt_wwpn, 3337 (struct lpfc_name *)tgt_wwpn, 3338 &found_lun, lun_status, lun_pri)) 3339 return found_lun; 3340 else 3341 return NOT_OAS_ENABLED_LUN; 3342 } 3343 3344 /** 3345 * lpfc_oas_lun_state_change - enable/disable a lun for OAS operations 3346 * @phba: lpfc_hba pointer. 3347 * @vpt_wwpn: vport wwpn by reference. 3348 * @tgt_wwpn: target wwpn by reference. 3349 * @lun: the fc lun for setting oas state. 3350 * @oas_state: the oas state to be set to the oas_lun. 3351 * @pri: priority 3352 * 3353 * This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE) 3354 * a lun for OAS operations. 3355 * 3356 * Return: 3357 * SUCCESS: 0 3358 * -ENOMEM: failed to enable an lun for OAS operations 3359 * -EPERM: OAS is not enabled 3360 */ 3361 static ssize_t 3362 lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[], 3363 uint8_t tgt_wwpn[], uint64_t lun, 3364 uint32_t oas_state, uint8_t pri) 3365 { 3366 3367 int rc; 3368 3369 rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun, 3370 oas_state, pri); 3371 return rc; 3372 } 3373 3374 /** 3375 * lpfc_oas_lun_show - Return oas enabled luns from a chosen target 3376 * @dev: class device that is converted into a Scsi_host. 3377 * @attr: device attribute, not used. 3378 * @buf: buffer for passing information. 3379 * 3380 * This routine returns a lun enabled for OAS each time the function 3381 * is called. 3382 * 3383 * Returns: 3384 * SUCCESS: size of formatted string. 3385 * -EFAULT: target or vport wwpn was not set properly. 3386 * -EPERM: oas is not enabled. 3387 **/ 3388 static ssize_t 3389 lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr, 3390 char *buf) 3391 { 3392 struct Scsi_Host *shost = class_to_shost(dev); 3393 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3394 3395 uint64_t oas_lun; 3396 int len = 0; 3397 3398 if (!phba->cfg_fof) 3399 return -EPERM; 3400 3401 if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) 3402 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT)) 3403 return -EFAULT; 3404 3405 if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) 3406 if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET)) 3407 return -EFAULT; 3408 3409 oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn, 3410 phba->cfg_oas_tgt_wwpn, 3411 &phba->cfg_oas_lun_status, 3412 &phba->cfg_oas_priority); 3413 if (oas_lun != NOT_OAS_ENABLED_LUN) 3414 phba->cfg_oas_flags |= OAS_LUN_VALID; 3415 3416 len += scnprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun); 3417 3418 return len; 3419 } 3420 3421 /** 3422 * lpfc_oas_lun_store - Sets the OAS state for lun 3423 * @dev: class device that is converted into a Scsi_host. 3424 * @attr: device attribute, not used. 3425 * @buf: buffer for passing information. 3426 * @count: size of the formatting string 3427 * 3428 * This function sets the OAS state for lun. Before this function is called, 3429 * the vport wwpn, target wwpn, and oas state need to be set. 3430 * 3431 * Returns: 3432 * SUCCESS: size of formatted string. 3433 * -EFAULT: target or vport wwpn was not set properly. 3434 * -EPERM: oas is not enabled. 3435 * size of formatted string. 3436 **/ 3437 static ssize_t 3438 lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr, 3439 const char *buf, size_t count) 3440 { 3441 struct Scsi_Host *shost = class_to_shost(dev); 3442 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3443 uint64_t scsi_lun; 3444 uint32_t pri; 3445 ssize_t rc; 3446 3447 if (!phba->cfg_fof) 3448 return -EPERM; 3449 3450 if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0) 3451 return -EFAULT; 3452 3453 if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0) 3454 return -EFAULT; 3455 3456 if (!isdigit(buf[0])) 3457 return -EINVAL; 3458 3459 if (sscanf(buf, "0x%llx", &scsi_lun) != 1) 3460 return -EINVAL; 3461 3462 pri = phba->cfg_oas_priority; 3463 if (pri == 0) 3464 pri = phba->cfg_XLanePriority; 3465 3466 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 3467 "3372 Try to set vport 0x%llx target 0x%llx lun:0x%llx " 3468 "priority 0x%x with oas state %d\n", 3469 wwn_to_u64(phba->cfg_oas_vpt_wwpn), 3470 wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun, 3471 pri, phba->cfg_oas_lun_state); 3472 3473 rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn, 3474 phba->cfg_oas_tgt_wwpn, scsi_lun, 3475 phba->cfg_oas_lun_state, pri); 3476 if (rc) 3477 return rc; 3478 3479 return count; 3480 } 3481 static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR, 3482 lpfc_oas_lun_show, lpfc_oas_lun_store); 3483 3484 int lpfc_enable_nvmet_cnt; 3485 unsigned long long lpfc_enable_nvmet[LPFC_NVMET_MAX_PORTS] = { 3486 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3487 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 3488 module_param_array(lpfc_enable_nvmet, ullong, &lpfc_enable_nvmet_cnt, 0444); 3489 MODULE_PARM_DESC(lpfc_enable_nvmet, "Enable HBA port(s) WWPN as a NVME Target"); 3490 3491 static int lpfc_poll = 0; 3492 module_param(lpfc_poll, int, S_IRUGO); 3493 MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:" 3494 " 0 - none," 3495 " 1 - poll with interrupts enabled" 3496 " 3 - poll and disable FCP ring interrupts"); 3497 3498 static DEVICE_ATTR_RW(lpfc_poll); 3499 3500 int lpfc_no_hba_reset_cnt; 3501 unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = { 3502 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 3503 module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444); 3504 MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset"); 3505 3506 LPFC_ATTR(sli_mode, 3, 3, 3, 3507 "SLI mode selector: 3 - select SLI-3"); 3508 3509 LPFC_ATTR_R(enable_npiv, 1, 0, 1, 3510 "Enable NPIV functionality"); 3511 3512 LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2, 3513 "FCF Fast failover=1 Priority failover=2"); 3514 3515 /* 3516 * lpfc_fcp_wait_abts_rsp: Modifies criteria for reporting completion of 3517 * aborted IO. 3518 * The range is [0,1]. Default value is 0 3519 * 0, IO completes after ABTS issued (default). 3520 * 1, IO completes after receipt of ABTS response or timeout. 3521 */ 3522 LPFC_ATTR_R(fcp_wait_abts_rsp, 0, 0, 1, "Wait for FCP ABTS completion"); 3523 3524 /* 3525 # lpfc_enable_rrq: Track XRI/OXID reuse after IO failures 3526 # 0x0 = disabled, XRI/OXID use not tracked. 3527 # 0x1 = XRI/OXID reuse is timed with ratov, RRQ sent. 3528 # 0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent. 3529 */ 3530 LPFC_ATTR_R(enable_rrq, 2, 0, 2, 3531 "Enable RRQ functionality"); 3532 3533 /* 3534 # lpfc_suppress_link_up: Bring link up at initialization 3535 # 0x0 = bring link up (issue MBX_INIT_LINK) 3536 # 0x1 = do NOT bring link up at initialization(MBX_INIT_LINK) 3537 # 0x2 = never bring up link 3538 # Default value is 0. 3539 */ 3540 LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK, 3541 LPFC_DELAY_INIT_LINK_INDEFINITELY, 3542 "Suppress Link Up at initialization"); 3543 3544 static ssize_t 3545 lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf) 3546 { 3547 struct Scsi_Host *shost = class_to_shost(dev); 3548 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3549 3550 return scnprintf(buf, PAGE_SIZE, "%d\n", 3551 phba->sli4_hba.pc_sli4_params.pls); 3552 } 3553 static DEVICE_ATTR(pls, 0444, 3554 lpfc_pls_show, NULL); 3555 3556 static ssize_t 3557 lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf) 3558 { 3559 struct Scsi_Host *shost = class_to_shost(dev); 3560 struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; 3561 3562 return scnprintf(buf, PAGE_SIZE, "%d\n", 3563 (phba->hba_flag & HBA_PERSISTENT_TOPO) ? 1 : 0); 3564 } 3565 static DEVICE_ATTR(pt, 0444, 3566 lpfc_pt_show, NULL); 3567 3568 /* 3569 # lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS 3570 # 1 - (1024) 3571 # 2 - (2048) 3572 # 3 - (3072) 3573 # 4 - (4096) 3574 # 5 - (5120) 3575 */ 3576 static ssize_t 3577 lpfc_iocb_hw_show(struct device *dev, struct device_attribute *attr, char *buf) 3578 { 3579 struct Scsi_Host *shost = class_to_shost(dev); 3580 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; 3581 3582 return scnprintf(buf, PAGE_SIZE, "%d\n", phba->iocb_max); 3583 } 3584 3585 static DEVICE_ATTR(iocb_hw, S_IRUGO, 3586 lpfc_iocb_hw_show, NULL); 3587 static ssize_t 3588 lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf) 3589 { 3590 struct Scsi_Host *shost = class_to_shost(dev); 3591 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; 3592 struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba); 3593 3594 return scnprintf(buf, PAGE_SIZE, "%d\n", 3595 pring ? pring->txq_max : 0); 3596 } 3597 3598 static DEVICE_ATTR(txq_hw, S_IRUGO, 3599 lpfc_txq_hw_show, NULL); 3600 static ssize_t 3601 lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr, 3602 char *buf) 3603 { 3604 struct Scsi_Host *shost = class_to_shost(dev); 3605 struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba; 3606 struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba); 3607 3608 return scnprintf(buf, PAGE_SIZE, "%d\n", 3609 pring ? pring->txcmplq_max : 0); 3610 } 3611 3612 static DEVICE_ATTR(txcmplq_hw, S_IRUGO, 3613 lpfc_txcmplq_hw_show, NULL); 3614 3615 /* 3616 # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear 3617 # until the timer expires. Value range is [0,255]. Default value is 30. 3618 */ 3619 static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; 3620 static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO; 3621 module_param(lpfc_nodev_tmo, int, 0); 3622 MODULE_PARM_DESC(lpfc_nodev_tmo, 3623 "Seconds driver will hold I/O waiting " 3624 "for a device to come back"); 3625 3626 /** 3627 * lpfc_nodev_tmo_show - Return the hba dev loss timeout value 3628 * @dev: class converted to a Scsi_host structure. 3629 * @attr: device attribute, not used. 3630 * @buf: on return contains the dev loss timeout in decimal. 3631 * 3632 * Returns: size of formatted string. 3633 **/ 3634 static ssize_t 3635 lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr, 3636 char *buf) 3637 { 3638 struct Scsi_Host *shost = class_to_shost(dev); 3639 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 3640 3641 return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo); 3642 } 3643 3644 /** 3645 * lpfc_nodev_tmo_init - Set the hba nodev timeout value 3646 * @vport: lpfc vport structure pointer. 3647 * @val: contains the nodev timeout value. 3648 * 3649 * Description: 3650 * If the devloss tmo is already set then nodev tmo is set to devloss tmo, 3651 * a kernel error message is printed and zero is returned. 3652 * Else if val is in range then nodev tmo and devloss tmo are set to val. 3653 * Otherwise nodev tmo is set to the default value. 3654 * 3655 * Returns: 3656 * zero if already set or if val is in range 3657 * -EINVAL val out of range 3658 **/ 3659 static int 3660 lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val) 3661 { 3662 if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) { 3663 vport->cfg_nodev_tmo = vport->cfg_devloss_tmo; 3664 if (val != LPFC_DEF_DEVLOSS_TMO) 3665 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3666 "0407 Ignoring lpfc_nodev_tmo module " 3667 "parameter because lpfc_devloss_tmo " 3668 "is set.\n"); 3669 return 0; 3670 } 3671 3672 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { 3673 vport->cfg_nodev_tmo = val; 3674 vport->cfg_devloss_tmo = val; 3675 return 0; 3676 } 3677 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3678 "0400 lpfc_nodev_tmo attribute cannot be set to" 3679 " %d, allowed range is [%d, %d]\n", 3680 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); 3681 vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO; 3682 return -EINVAL; 3683 } 3684 3685 /** 3686 * lpfc_update_rport_devloss_tmo - Update dev loss tmo value 3687 * @vport: lpfc vport structure pointer. 3688 * 3689 * Description: 3690 * Update all the ndlp's dev loss tmo with the vport devloss tmo value. 3691 **/ 3692 static void 3693 lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) 3694 { 3695 struct Scsi_Host *shost; 3696 struct lpfc_nodelist *ndlp; 3697 #if (IS_ENABLED(CONFIG_NVME_FC)) 3698 struct lpfc_nvme_rport *rport; 3699 struct nvme_fc_remote_port *remoteport = NULL; 3700 #endif 3701 3702 shost = lpfc_shost_from_vport(vport); 3703 spin_lock_irq(shost->host_lock); 3704 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 3705 if (ndlp->rport) 3706 ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo; 3707 #if (IS_ENABLED(CONFIG_NVME_FC)) 3708 spin_lock(&ndlp->lock); 3709 rport = lpfc_ndlp_get_nrport(ndlp); 3710 if (rport) 3711 remoteport = rport->remoteport; 3712 spin_unlock(&ndlp->lock); 3713 if (rport && remoteport) 3714 nvme_fc_set_remoteport_devloss(remoteport, 3715 vport->cfg_devloss_tmo); 3716 #endif 3717 } 3718 spin_unlock_irq(shost->host_lock); 3719 } 3720 3721 /** 3722 * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values 3723 * @vport: lpfc vport structure pointer. 3724 * @val: contains the tmo value. 3725 * 3726 * Description: 3727 * If the devloss tmo is already set or the vport dev loss tmo has changed 3728 * then a kernel error message is printed and zero is returned. 3729 * Else if val is in range then nodev tmo and devloss tmo are set to val. 3730 * Otherwise nodev tmo is set to the default value. 3731 * 3732 * Returns: 3733 * zero if already set or if val is in range 3734 * -EINVAL val out of range 3735 **/ 3736 static int 3737 lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val) 3738 { 3739 if (vport->dev_loss_tmo_changed || 3740 (lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) { 3741 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3742 "0401 Ignoring change to lpfc_nodev_tmo " 3743 "because lpfc_devloss_tmo is set.\n"); 3744 return 0; 3745 } 3746 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { 3747 vport->cfg_nodev_tmo = val; 3748 vport->cfg_devloss_tmo = val; 3749 /* 3750 * For compat: set the fc_host dev loss so new rports 3751 * will get the value. 3752 */ 3753 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val; 3754 lpfc_update_rport_devloss_tmo(vport); 3755 return 0; 3756 } 3757 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3758 "0403 lpfc_nodev_tmo attribute cannot be set to " 3759 "%d, allowed range is [%d, %d]\n", 3760 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); 3761 return -EINVAL; 3762 } 3763 3764 lpfc_vport_param_store(nodev_tmo) 3765 3766 static DEVICE_ATTR_RW(lpfc_nodev_tmo); 3767 3768 /* 3769 # lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that 3770 # disappear until the timer expires. Value range is [0,255]. Default 3771 # value is 30. 3772 */ 3773 module_param(lpfc_devloss_tmo, int, S_IRUGO); 3774 MODULE_PARM_DESC(lpfc_devloss_tmo, 3775 "Seconds driver will hold I/O waiting " 3776 "for a device to come back"); 3777 lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO, 3778 LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO) 3779 lpfc_vport_param_show(devloss_tmo) 3780 3781 /** 3782 * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit 3783 * @vport: lpfc vport structure pointer. 3784 * @val: contains the tmo value. 3785 * 3786 * Description: 3787 * If val is in a valid range then set the vport nodev tmo, 3788 * devloss tmo, also set the vport dev loss tmo changed flag. 3789 * Else a kernel error message is printed. 3790 * 3791 * Returns: 3792 * zero if val is in range 3793 * -EINVAL val out of range 3794 **/ 3795 static int 3796 lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val) 3797 { 3798 if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) { 3799 vport->cfg_nodev_tmo = val; 3800 vport->cfg_devloss_tmo = val; 3801 vport->dev_loss_tmo_changed = 1; 3802 fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val; 3803 lpfc_update_rport_devloss_tmo(vport); 3804 return 0; 3805 } 3806 3807 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3808 "0404 lpfc_devloss_tmo attribute cannot be set to " 3809 "%d, allowed range is [%d, %d]\n", 3810 val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO); 3811 return -EINVAL; 3812 } 3813 3814 lpfc_vport_param_store(devloss_tmo) 3815 static DEVICE_ATTR_RW(lpfc_devloss_tmo); 3816 3817 /* 3818 * lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it 3819 * lpfc_suppress_rsp = 0 Disable 3820 * lpfc_suppress_rsp = 1 Enable (default) 3821 * 3822 */ 3823 LPFC_ATTR_R(suppress_rsp, 1, 0, 1, 3824 "Enable suppress rsp feature is firmware supports it"); 3825 3826 /* 3827 * lpfc_nvmet_mrq: Specify number of RQ pairs for processing NVMET cmds 3828 * lpfc_nvmet_mrq = 0 driver will calcualte optimal number of RQ pairs 3829 * lpfc_nvmet_mrq = 1 use a single RQ pair 3830 * lpfc_nvmet_mrq >= 2 use specified RQ pairs for MRQ 3831 * 3832 */ 3833 LPFC_ATTR_R(nvmet_mrq, 3834 LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_MAX, 3835 "Specify number of RQ pairs for processing NVMET cmds"); 3836 3837 /* 3838 * lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post 3839 * to each NVMET RQ. Range 64 to 2048, default is 512. 3840 */ 3841 LPFC_ATTR_R(nvmet_mrq_post, 3842 LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST, 3843 LPFC_NVMET_RQE_DEF_COUNT, 3844 "Specify number of RQ buffers to initially post"); 3845 3846 /* 3847 * lpfc_enable_fc4_type: Defines what FC4 types are supported. 3848 * Supported Values: 1 - register just FCP 3849 * 3 - register both FCP and NVME 3850 * Supported values are [1,3]. Default value is 3 3851 */ 3852 LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE, 3853 LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE, 3854 "Enable FC4 Protocol support - FCP / NVME"); 3855 3856 /* 3857 # lpfc_log_verbose: Only turn this flag on if you are willing to risk being 3858 # deluged with LOTS of information. 3859 # You can set a bit mask to record specific types of verbose messages: 3860 # See lpfc_logmsh.h for definitions. 3861 */ 3862 LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff, 3863 "Verbose logging bit-mask"); 3864 3865 /* 3866 # lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters 3867 # objects that have been registered with the nameserver after login. 3868 */ 3869 LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1, 3870 "Deregister nameserver objects before LOGO"); 3871 3872 /* 3873 # lun_queue_depth: This parameter is used to limit the number of outstanding 3874 # commands per FCP LUN. 3875 */ 3876 LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512, 3877 "Max number of FCP commands we can queue to a specific LUN"); 3878 3879 /* 3880 # tgt_queue_depth: This parameter is used to limit the number of outstanding 3881 # commands per target port. Value range is [10,65535]. Default value is 65535. 3882 */ 3883 static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH; 3884 module_param(lpfc_tgt_queue_depth, uint, 0444); 3885 MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth"); 3886 lpfc_vport_param_show(tgt_queue_depth); 3887 lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH, 3888 LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH); 3889 3890 /** 3891 * lpfc_tgt_queue_depth_set: Sets an attribute value. 3892 * @vport: lpfc vport structure pointer. 3893 * @val: integer attribute value. 3894 * 3895 * Description: Sets the parameter to the new value. 3896 * 3897 * Returns: 3898 * zero on success 3899 * -EINVAL if val is invalid 3900 */ 3901 static int 3902 lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val) 3903 { 3904 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 3905 struct lpfc_nodelist *ndlp; 3906 3907 if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH)) 3908 return -EINVAL; 3909 3910 if (val == vport->cfg_tgt_queue_depth) 3911 return 0; 3912 3913 spin_lock_irq(shost->host_lock); 3914 vport->cfg_tgt_queue_depth = val; 3915 3916 /* Next loop thru nodelist and change cmd_qdepth */ 3917 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) 3918 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; 3919 3920 spin_unlock_irq(shost->host_lock); 3921 return 0; 3922 } 3923 3924 lpfc_vport_param_store(tgt_queue_depth); 3925 static DEVICE_ATTR_RW(lpfc_tgt_queue_depth); 3926 3927 /* 3928 # hba_queue_depth: This parameter is used to limit the number of outstanding 3929 # commands per lpfc HBA. Value range is [32,8192]. If this parameter 3930 # value is greater than the maximum number of exchanges supported by the HBA, 3931 # then maximum number of exchanges supported by the HBA is used to determine 3932 # the hba_queue_depth. 3933 */ 3934 LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192, 3935 "Max number of FCP commands we can queue to a lpfc HBA"); 3936 3937 /* 3938 # peer_port_login: This parameter allows/prevents logins 3939 # between peer ports hosted on the same physical port. 3940 # When this parameter is set 0 peer ports of same physical port 3941 # are not allowed to login to each other. 3942 # When this parameter is set 1 peer ports of same physical port 3943 # are allowed to login to each other. 3944 # Default value of this parameter is 0. 3945 */ 3946 LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1, 3947 "Allow peer ports on the same physical port to login to each " 3948 "other."); 3949 3950 /* 3951 # restrict_login: This parameter allows/prevents logins 3952 # between Virtual Ports and remote initiators. 3953 # When this parameter is not set (0) Virtual Ports will accept PLOGIs from 3954 # other initiators and will attempt to PLOGI all remote ports. 3955 # When this parameter is set (1) Virtual Ports will reject PLOGIs from 3956 # remote ports and will not attempt to PLOGI to other initiators. 3957 # This parameter does not restrict to the physical port. 3958 # This parameter does not restrict logins to Fabric resident remote ports. 3959 # Default value of this parameter is 1. 3960 */ 3961 static int lpfc_restrict_login = 1; 3962 module_param(lpfc_restrict_login, int, S_IRUGO); 3963 MODULE_PARM_DESC(lpfc_restrict_login, 3964 "Restrict virtual ports login to remote initiators."); 3965 lpfc_vport_param_show(restrict_login); 3966 3967 /** 3968 * lpfc_restrict_login_init - Set the vport restrict login flag 3969 * @vport: lpfc vport structure pointer. 3970 * @val: contains the restrict login value. 3971 * 3972 * Description: 3973 * If val is not in a valid range then log a kernel error message and set 3974 * the vport restrict login to one. 3975 * If the port type is physical clear the restrict login flag and return. 3976 * Else set the restrict login flag to val. 3977 * 3978 * Returns: 3979 * zero if val is in range 3980 * -EINVAL val out of range 3981 **/ 3982 static int 3983 lpfc_restrict_login_init(struct lpfc_vport *vport, int val) 3984 { 3985 if (val < 0 || val > 1) { 3986 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 3987 "0422 lpfc_restrict_login attribute cannot " 3988 "be set to %d, allowed range is [0, 1]\n", 3989 val); 3990 vport->cfg_restrict_login = 1; 3991 return -EINVAL; 3992 } 3993 if (vport->port_type == LPFC_PHYSICAL_PORT) { 3994 vport->cfg_restrict_login = 0; 3995 return 0; 3996 } 3997 vport->cfg_restrict_login = val; 3998 return 0; 3999 } 4000 4001 /** 4002 * lpfc_restrict_login_set - Set the vport restrict login flag 4003 * @vport: lpfc vport structure pointer. 4004 * @val: contains the restrict login value. 4005 * 4006 * Description: 4007 * If val is not in a valid range then log a kernel error message and set 4008 * the vport restrict login to one. 4009 * If the port type is physical and the val is not zero log a kernel 4010 * error message, clear the restrict login flag and return zero. 4011 * Else set the restrict login flag to val. 4012 * 4013 * Returns: 4014 * zero if val is in range 4015 * -EINVAL val out of range 4016 **/ 4017 static int 4018 lpfc_restrict_login_set(struct lpfc_vport *vport, int val) 4019 { 4020 if (val < 0 || val > 1) { 4021 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4022 "0425 lpfc_restrict_login attribute cannot " 4023 "be set to %d, allowed range is [0, 1]\n", 4024 val); 4025 vport->cfg_restrict_login = 1; 4026 return -EINVAL; 4027 } 4028 if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) { 4029 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4030 "0468 lpfc_restrict_login must be 0 for " 4031 "Physical ports.\n"); 4032 vport->cfg_restrict_login = 0; 4033 return 0; 4034 } 4035 vport->cfg_restrict_login = val; 4036 return 0; 4037 } 4038 lpfc_vport_param_store(restrict_login); 4039 static DEVICE_ATTR_RW(lpfc_restrict_login); 4040 4041 /* 4042 # Some disk devices have a "select ID" or "select Target" capability. 4043 # From a protocol standpoint "select ID" usually means select the 4044 # Fibre channel "ALPA". In the FC-AL Profile there is an "informative 4045 # annex" which contains a table that maps a "select ID" (a number 4046 # between 0 and 7F) to an ALPA. By default, for compatibility with 4047 # older drivers, the lpfc driver scans this table from low ALPA to high 4048 # ALPA. 4049 # 4050 # Turning on the scan-down variable (on = 1, off = 0) will 4051 # cause the lpfc driver to use an inverted table, effectively 4052 # scanning ALPAs from high to low. Value range is [0,1]. Default value is 1. 4053 # 4054 # (Note: This "select ID" functionality is a LOOP ONLY characteristic 4055 # and will not work across a fabric. Also this parameter will take 4056 # effect only in the case when ALPA map is not available.) 4057 */ 4058 LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, 4059 "Start scanning for devices from highest ALPA to lowest"); 4060 4061 /* 4062 # lpfc_topology: link topology for init link 4063 # 0x0 = attempt loop mode then point-to-point 4064 # 0x01 = internal loopback mode 4065 # 0x02 = attempt point-to-point mode only 4066 # 0x04 = attempt loop mode only 4067 # 0x06 = attempt point-to-point mode then loop 4068 # Set point-to-point mode if you want to run as an N_Port. 4069 # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6]. 4070 # Default value is 0. 4071 */ 4072 LPFC_ATTR(topology, 0, 0, 6, 4073 "Select Fibre Channel topology"); 4074 4075 /** 4076 * lpfc_topology_store - Set the adapters topology field 4077 * @dev: class device that is converted into a scsi_host. 4078 * @attr:device attribute, not used. 4079 * @buf: buffer for passing information. 4080 * @count: size of the data buffer. 4081 * 4082 * Description: 4083 * If val is in a valid range then set the adapter's topology field and 4084 * issue a lip; if the lip fails reset the topology to the old value. 4085 * 4086 * If the value is not in range log a kernel error message and return an error. 4087 * 4088 * Returns: 4089 * zero if val is in range and lip okay 4090 * non-zero return value from lpfc_issue_lip() 4091 * -EINVAL val out of range 4092 **/ 4093 static ssize_t 4094 lpfc_topology_store(struct device *dev, struct device_attribute *attr, 4095 const char *buf, size_t count) 4096 { 4097 struct Scsi_Host *shost = class_to_shost(dev); 4098 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 4099 struct lpfc_hba *phba = vport->phba; 4100 int val = 0; 4101 int nolip = 0; 4102 const char *val_buf = buf; 4103 int err; 4104 uint32_t prev_val; 4105 u8 sli_family, if_type; 4106 4107 if (!strncmp(buf, "nolip ", strlen("nolip "))) { 4108 nolip = 1; 4109 val_buf = &buf[strlen("nolip ")]; 4110 } 4111 4112 if (!isdigit(val_buf[0])) 4113 return -EINVAL; 4114 if (sscanf(val_buf, "%i", &val) != 1) 4115 return -EINVAL; 4116 4117 if (val >= 0 && val <= 6) { 4118 prev_val = phba->cfg_topology; 4119 if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G && 4120 val == 4) { 4121 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4122 "3113 Loop mode not supported at speed %d\n", 4123 val); 4124 return -EINVAL; 4125 } 4126 /* 4127 * The 'topology' is not a configurable parameter if : 4128 * - persistent topology enabled 4129 * - ASIC_GEN_NUM >= 0xC, with no private loop support 4130 */ 4131 sli_family = bf_get(lpfc_sli_intf_sli_family, 4132 &phba->sli4_hba.sli_intf); 4133 if_type = bf_get(lpfc_sli_intf_if_type, 4134 &phba->sli4_hba.sli_intf); 4135 if ((phba->hba_flag & HBA_PERSISTENT_TOPO || 4136 (!phba->sli4_hba.pc_sli4_params.pls && 4137 (sli_family == LPFC_SLI_INTF_FAMILY_G6 || 4138 if_type == LPFC_SLI_INTF_IF_TYPE_6))) && 4139 val == 4) { 4140 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4141 "3114 Loop mode not supported\n"); 4142 return -EINVAL; 4143 } 4144 phba->cfg_topology = val; 4145 if (nolip) 4146 return strlen(buf); 4147 4148 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4149 "3054 lpfc_topology changed from %d to %d\n", 4150 prev_val, val); 4151 if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4) 4152 phba->fc_topology_changed = 1; 4153 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); 4154 if (err) { 4155 phba->cfg_topology = prev_val; 4156 return -EINVAL; 4157 } else 4158 return strlen(buf); 4159 } 4160 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4161 "%d:0467 lpfc_topology attribute cannot be set to %d, " 4162 "allowed range is [0, 6]\n", 4163 phba->brd_no, val); 4164 return -EINVAL; 4165 } 4166 4167 lpfc_param_show(topology) 4168 static DEVICE_ATTR_RW(lpfc_topology); 4169 4170 /** 4171 * lpfc_static_vport_show: Read callback function for 4172 * lpfc_static_vport sysfs file. 4173 * @dev: Pointer to class device object. 4174 * @attr: device attribute structure. 4175 * @buf: Data buffer. 4176 * 4177 * This function is the read call back function for 4178 * lpfc_static_vport sysfs file. The lpfc_static_vport 4179 * sysfs file report the mageability of the vport. 4180 **/ 4181 static ssize_t 4182 lpfc_static_vport_show(struct device *dev, struct device_attribute *attr, 4183 char *buf) 4184 { 4185 struct Scsi_Host *shost = class_to_shost(dev); 4186 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 4187 if (vport->vport_flag & STATIC_VPORT) 4188 sprintf(buf, "1\n"); 4189 else 4190 sprintf(buf, "0\n"); 4191 4192 return strlen(buf); 4193 } 4194 4195 /* 4196 * Sysfs attribute to control the statistical data collection. 4197 */ 4198 static DEVICE_ATTR_RO(lpfc_static_vport); 4199 4200 /* 4201 # lpfc_link_speed: Link speed selection for initializing the Fibre Channel 4202 # connection. 4203 # Value range is [0,16]. Default value is 0. 4204 */ 4205 /** 4206 * lpfc_link_speed_store - Set the adapters link speed 4207 * @dev: Pointer to class device. 4208 * @attr: Unused. 4209 * @buf: Data buffer. 4210 * @count: Size of the data buffer. 4211 * 4212 * Description: 4213 * If val is in a valid range then set the adapter's link speed field and 4214 * issue a lip; if the lip fails reset the link speed to the old value. 4215 * 4216 * Notes: 4217 * If the value is not in range log a kernel error message and return an error. 4218 * 4219 * Returns: 4220 * zero if val is in range and lip okay. 4221 * non-zero return value from lpfc_issue_lip() 4222 * -EINVAL val out of range 4223 **/ 4224 static ssize_t 4225 lpfc_link_speed_store(struct device *dev, struct device_attribute *attr, 4226 const char *buf, size_t count) 4227 { 4228 struct Scsi_Host *shost = class_to_shost(dev); 4229 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 4230 struct lpfc_hba *phba = vport->phba; 4231 int val = LPFC_USER_LINK_SPEED_AUTO; 4232 int nolip = 0; 4233 const char *val_buf = buf; 4234 int err; 4235 uint32_t prev_val, if_type; 4236 4237 if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); 4238 if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 && 4239 phba->hba_flag & HBA_FORCED_LINK_SPEED) 4240 return -EPERM; 4241 4242 if (!strncmp(buf, "nolip ", strlen("nolip "))) { 4243 nolip = 1; 4244 val_buf = &buf[strlen("nolip ")]; 4245 } 4246 4247 if (!isdigit(val_buf[0])) 4248 return -EINVAL; 4249 if (sscanf(val_buf, "%i", &val) != 1) 4250 return -EINVAL; 4251 4252 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, 4253 "3055 lpfc_link_speed changed from %d to %d %s\n", 4254 phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)"); 4255 4256 if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || 4257 ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || 4258 ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || 4259 ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) || 4260 ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) || 4261 ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb)) || 4262 ((val == LPFC_USER_LINK_SPEED_32G) && !(phba->lmt & LMT_32Gb)) || 4263 ((val == LPFC_USER_LINK_SPEED_64G) && !(phba->lmt & LMT_64Gb))) { 4264 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4265 "2879 lpfc_link_speed attribute cannot be set " 4266 "to %d. Speed is not supported by this port.\n", 4267 val); 4268 return -EINVAL; 4269 } 4270 if (val >= LPFC_USER_LINK_SPEED_16G && 4271 phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 4272 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4273 "3112 lpfc_link_speed attribute cannot be set " 4274 "to %d. Speed is not supported in loop mode.\n", 4275 val); 4276 return -EINVAL; 4277 } 4278 4279 switch (val) { 4280 case LPFC_USER_LINK_SPEED_AUTO: 4281 case LPFC_USER_LINK_SPEED_1G: 4282 case LPFC_USER_LINK_SPEED_2G: 4283 case LPFC_USER_LINK_SPEED_4G: 4284 case LPFC_USER_LINK_SPEED_8G: 4285 case LPFC_USER_LINK_SPEED_16G: 4286 case LPFC_USER_LINK_SPEED_32G: 4287 case LPFC_USER_LINK_SPEED_64G: 4288 prev_val = phba->cfg_link_speed; 4289 phba->cfg_link_speed = val; 4290 if (nolip) 4291 return strlen(buf); 4292 4293 err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); 4294 if (err) { 4295 phba->cfg_link_speed = prev_val; 4296 return -EINVAL; 4297 } 4298 return strlen(buf); 4299 default: 4300 break; 4301 } 4302 4303 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4304 "0469 lpfc_link_speed attribute cannot be set to %d, " 4305 "allowed values are [%s]\n", 4306 val, LPFC_LINK_SPEED_STRING); 4307 return -EINVAL; 4308 4309 } 4310 4311 static int lpfc_link_speed = 0; 4312 module_param(lpfc_link_speed, int, S_IRUGO); 4313 MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); 4314 lpfc_param_show(link_speed) 4315 4316 /** 4317 * lpfc_link_speed_init - Set the adapters link speed 4318 * @phba: lpfc_hba pointer. 4319 * @val: link speed value. 4320 * 4321 * Description: 4322 * If val is in a valid range then set the adapter's link speed field. 4323 * 4324 * Notes: 4325 * If the value is not in range log a kernel error message, clear the link 4326 * speed and return an error. 4327 * 4328 * Returns: 4329 * zero if val saved. 4330 * -EINVAL val out of range 4331 **/ 4332 static int 4333 lpfc_link_speed_init(struct lpfc_hba *phba, int val) 4334 { 4335 if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) { 4336 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4337 "3111 lpfc_link_speed of %d cannot " 4338 "support loop mode, setting topology to default.\n", 4339 val); 4340 phba->cfg_topology = 0; 4341 } 4342 4343 switch (val) { 4344 case LPFC_USER_LINK_SPEED_AUTO: 4345 case LPFC_USER_LINK_SPEED_1G: 4346 case LPFC_USER_LINK_SPEED_2G: 4347 case LPFC_USER_LINK_SPEED_4G: 4348 case LPFC_USER_LINK_SPEED_8G: 4349 case LPFC_USER_LINK_SPEED_16G: 4350 case LPFC_USER_LINK_SPEED_32G: 4351 case LPFC_USER_LINK_SPEED_64G: 4352 phba->cfg_link_speed = val; 4353 return 0; 4354 default: 4355 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4356 "0405 lpfc_link_speed attribute cannot " 4357 "be set to %d, allowed values are " 4358 "["LPFC_LINK_SPEED_STRING"]\n", val); 4359 phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO; 4360 return -EINVAL; 4361 } 4362 } 4363 4364 static DEVICE_ATTR_RW(lpfc_link_speed); 4365 4366 /* 4367 # lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER) 4368 # 0 = aer disabled or not supported 4369 # 1 = aer supported and enabled (default) 4370 # Value range is [0,1]. Default value is 1. 4371 */ 4372 LPFC_ATTR(aer_support, 1, 0, 1, 4373 "Enable PCIe device AER support"); 4374 lpfc_param_show(aer_support) 4375 4376 /** 4377 * lpfc_aer_support_store - Set the adapter for aer support 4378 * 4379 * @dev: class device that is converted into a Scsi_host. 4380 * @attr: device attribute, not used. 4381 * @buf: containing enable or disable aer flag. 4382 * @count: unused variable. 4383 * 4384 * Description: 4385 * If the val is 1 and currently the device's AER capability was not 4386 * enabled, invoke the kernel's enable AER helper routine, trying to 4387 * enable the device's AER capability. If the helper routine enabling 4388 * AER returns success, update the device's cfg_aer_support flag to 4389 * indicate AER is supported by the device; otherwise, if the device 4390 * AER capability is already enabled to support AER, then do nothing. 4391 * 4392 * If the val is 0 and currently the device's AER support was enabled, 4393 * invoke the kernel's disable AER helper routine. After that, update 4394 * the device's cfg_aer_support flag to indicate AER is not supported 4395 * by the device; otherwise, if the device AER capability is already 4396 * disabled from supporting AER, then do nothing. 4397 * 4398 * Returns: 4399 * length of the buf on success if val is in range the intended mode 4400 * is supported. 4401 * -EINVAL if val out of range or intended mode is not supported. 4402 **/ 4403 static ssize_t 4404 lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, 4405 const char *buf, size_t count) 4406 { 4407 struct Scsi_Host *shost = class_to_shost(dev); 4408 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4409 struct lpfc_hba *phba = vport->phba; 4410 int val = 0, rc = -EINVAL; 4411 4412 if (!isdigit(buf[0])) 4413 return -EINVAL; 4414 if (sscanf(buf, "%i", &val) != 1) 4415 return -EINVAL; 4416 4417 switch (val) { 4418 case 0: 4419 if (phba->hba_flag & HBA_AER_ENABLED) { 4420 rc = pci_disable_pcie_error_reporting(phba->pcidev); 4421 if (!rc) { 4422 spin_lock_irq(&phba->hbalock); 4423 phba->hba_flag &= ~HBA_AER_ENABLED; 4424 spin_unlock_irq(&phba->hbalock); 4425 phba->cfg_aer_support = 0; 4426 rc = strlen(buf); 4427 } else 4428 rc = -EPERM; 4429 } else { 4430 phba->cfg_aer_support = 0; 4431 rc = strlen(buf); 4432 } 4433 break; 4434 case 1: 4435 if (!(phba->hba_flag & HBA_AER_ENABLED)) { 4436 rc = pci_enable_pcie_error_reporting(phba->pcidev); 4437 if (!rc) { 4438 spin_lock_irq(&phba->hbalock); 4439 phba->hba_flag |= HBA_AER_ENABLED; 4440 spin_unlock_irq(&phba->hbalock); 4441 phba->cfg_aer_support = 1; 4442 rc = strlen(buf); 4443 } else 4444 rc = -EPERM; 4445 } else { 4446 phba->cfg_aer_support = 1; 4447 rc = strlen(buf); 4448 } 4449 break; 4450 default: 4451 rc = -EINVAL; 4452 break; 4453 } 4454 return rc; 4455 } 4456 4457 static DEVICE_ATTR_RW(lpfc_aer_support); 4458 4459 /** 4460 * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device 4461 * @dev: class device that is converted into a Scsi_host. 4462 * @attr: device attribute, not used. 4463 * @buf: containing flag 1 for aer cleanup state. 4464 * @count: unused variable. 4465 * 4466 * Description: 4467 * If the @buf contains 1 and the device currently has the AER support 4468 * enabled, then invokes the kernel AER helper routine 4469 * pci_aer_clear_nonfatal_status() to clean up the uncorrectable 4470 * error status register. 4471 * 4472 * Notes: 4473 * 4474 * Returns: 4475 * -EINVAL if the buf does not contain the 1 or the device is not currently 4476 * enabled with the AER support. 4477 **/ 4478 static ssize_t 4479 lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, 4480 const char *buf, size_t count) 4481 { 4482 struct Scsi_Host *shost = class_to_shost(dev); 4483 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 4484 struct lpfc_hba *phba = vport->phba; 4485 int val, rc = -1; 4486 4487 if (!isdigit(buf[0])) 4488 return -EINVAL; 4489 if (sscanf(buf, "%i", &val) != 1) 4490 return -EINVAL; 4491 if (val != 1) 4492 return -EINVAL; 4493 4494 if (phba->hba_flag & HBA_AER_ENABLED) 4495 rc = pci_aer_clear_nonfatal_status(phba->pcidev); 4496 4497 if (rc == 0) 4498 return strlen(buf); 4499 else 4500 return -EPERM; 4501 } 4502 4503 static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, 4504 lpfc_aer_cleanup_state); 4505 4506 /** 4507 * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions 4508 * 4509 * @dev: class device that is converted into a Scsi_host. 4510 * @attr: device attribute, not used. 4511 * @buf: containing the string the number of vfs to be enabled. 4512 * @count: unused variable. 4513 * 4514 * Description: 4515 * When this api is called either through user sysfs, the driver shall 4516 * try to enable or disable SR-IOV virtual functions according to the 4517 * following: 4518 * 4519 * If zero virtual function has been enabled to the physical function, 4520 * the driver shall invoke the pci enable virtual function api trying 4521 * to enable the virtual functions. If the nr_vfn provided is greater 4522 * than the maximum supported, the maximum virtual function number will 4523 * be used for invoking the api; otherwise, the nr_vfn provided shall 4524 * be used for invoking the api. If the api call returned success, the 4525 * actual number of virtual functions enabled will be set to the driver 4526 * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver 4527 * cfg_sriov_nr_virtfn remains zero. 4528 * 4529 * If none-zero virtual functions have already been enabled to the 4530 * physical function, as reflected by the driver's cfg_sriov_nr_virtfn, 4531 * -EINVAL will be returned and the driver does nothing; 4532 * 4533 * If the nr_vfn provided is zero and none-zero virtual functions have 4534 * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the 4535 * disabling virtual function api shall be invoded to disable all the 4536 * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to 4537 * zero. Otherwise, if zero virtual function has been enabled, do 4538 * nothing. 4539 * 4540 * Returns: 4541 * length of the buf on success if val is in range the intended mode 4542 * is supported. 4543 * -EINVAL if val out of range or intended mode is not supported. 4544 **/ 4545 static ssize_t 4546 lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr, 4547 const char *buf, size_t count) 4548 { 4549 struct Scsi_Host *shost = class_to_shost(dev); 4550 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4551 struct lpfc_hba *phba = vport->phba; 4552 struct pci_dev *pdev = phba->pcidev; 4553 int val = 0, rc = -EINVAL; 4554 4555 /* Sanity check on user data */ 4556 if (!isdigit(buf[0])) 4557 return -EINVAL; 4558 if (sscanf(buf, "%i", &val) != 1) 4559 return -EINVAL; 4560 if (val < 0) 4561 return -EINVAL; 4562 4563 /* Request disabling virtual functions */ 4564 if (val == 0) { 4565 if (phba->cfg_sriov_nr_virtfn > 0) { 4566 pci_disable_sriov(pdev); 4567 phba->cfg_sriov_nr_virtfn = 0; 4568 } 4569 return strlen(buf); 4570 } 4571 4572 /* Request enabling virtual functions */ 4573 if (phba->cfg_sriov_nr_virtfn > 0) { 4574 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4575 "3018 There are %d virtual functions " 4576 "enabled on physical function.\n", 4577 phba->cfg_sriov_nr_virtfn); 4578 return -EEXIST; 4579 } 4580 4581 if (val <= LPFC_MAX_VFN_PER_PFN) 4582 phba->cfg_sriov_nr_virtfn = val; 4583 else { 4584 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4585 "3019 Enabling %d virtual functions is not " 4586 "allowed.\n", val); 4587 return -EINVAL; 4588 } 4589 4590 rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn); 4591 if (rc) { 4592 phba->cfg_sriov_nr_virtfn = 0; 4593 rc = -EPERM; 4594 } else 4595 rc = strlen(buf); 4596 4597 return rc; 4598 } 4599 4600 LPFC_ATTR(sriov_nr_virtfn, LPFC_DEF_VFN_PER_PFN, 0, LPFC_MAX_VFN_PER_PFN, 4601 "Enable PCIe device SR-IOV virtual fn"); 4602 4603 lpfc_param_show(sriov_nr_virtfn) 4604 static DEVICE_ATTR_RW(lpfc_sriov_nr_virtfn); 4605 4606 /** 4607 * lpfc_request_firmware_upgrade_store - Request for Linux generic firmware upgrade 4608 * 4609 * @dev: class device that is converted into a Scsi_host. 4610 * @attr: device attribute, not used. 4611 * @buf: containing the string the number of vfs to be enabled. 4612 * @count: unused variable. 4613 * 4614 * Description: 4615 * 4616 * Returns: 4617 * length of the buf on success if val is in range the intended mode 4618 * is supported. 4619 * -EINVAL if val out of range or intended mode is not supported. 4620 **/ 4621 static ssize_t 4622 lpfc_request_firmware_upgrade_store(struct device *dev, 4623 struct device_attribute *attr, 4624 const char *buf, size_t count) 4625 { 4626 struct Scsi_Host *shost = class_to_shost(dev); 4627 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4628 struct lpfc_hba *phba = vport->phba; 4629 int val = 0, rc; 4630 4631 /* Sanity check on user data */ 4632 if (!isdigit(buf[0])) 4633 return -EINVAL; 4634 if (sscanf(buf, "%i", &val) != 1) 4635 return -EINVAL; 4636 if (val != 1) 4637 return -EINVAL; 4638 4639 rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE); 4640 if (rc) 4641 rc = -EPERM; 4642 else 4643 rc = strlen(buf); 4644 return rc; 4645 } 4646 4647 static int lpfc_req_fw_upgrade; 4648 module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR); 4649 MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade"); 4650 lpfc_param_show(request_firmware_upgrade) 4651 4652 /** 4653 * lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade 4654 * @phba: lpfc_hba pointer. 4655 * @val: 0 or 1. 4656 * 4657 * Description: 4658 * Set the initial Linux generic firmware upgrade enable or disable flag. 4659 * 4660 * Returns: 4661 * zero if val saved. 4662 * -EINVAL val out of range 4663 **/ 4664 static int 4665 lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val) 4666 { 4667 if (val >= 0 && val <= 1) { 4668 phba->cfg_request_firmware_upgrade = val; 4669 return 0; 4670 } 4671 return -EINVAL; 4672 } 4673 static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR, 4674 lpfc_request_firmware_upgrade_show, 4675 lpfc_request_firmware_upgrade_store); 4676 4677 /** 4678 * lpfc_force_rscn_store 4679 * 4680 * @dev: class device that is converted into a Scsi_host. 4681 * @attr: device attribute, not used. 4682 * @buf: unused string 4683 * @count: unused variable. 4684 * 4685 * Description: 4686 * Force the switch to send a RSCN to all other NPorts in our zone 4687 * If we are direct connect pt2pt, build the RSCN command ourself 4688 * and send to the other NPort. Not supported for private loop. 4689 * 4690 * Returns: 4691 * 0 - on success 4692 * -EIO - if command is not sent 4693 **/ 4694 static ssize_t 4695 lpfc_force_rscn_store(struct device *dev, struct device_attribute *attr, 4696 const char *buf, size_t count) 4697 { 4698 struct Scsi_Host *shost = class_to_shost(dev); 4699 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4700 int i; 4701 4702 i = lpfc_issue_els_rscn(vport, 0); 4703 if (i) 4704 return -EIO; 4705 return strlen(buf); 4706 } 4707 4708 /* 4709 * lpfc_force_rscn: Force an RSCN to be sent to all remote NPorts 4710 * connected to the HBA. 4711 * 4712 * Value range is any ascii value 4713 */ 4714 static int lpfc_force_rscn; 4715 module_param(lpfc_force_rscn, int, 0644); 4716 MODULE_PARM_DESC(lpfc_force_rscn, 4717 "Force an RSCN to be sent to all remote NPorts"); 4718 lpfc_param_show(force_rscn) 4719 4720 /** 4721 * lpfc_force_rscn_init - Force an RSCN to be sent to all remote NPorts 4722 * @phba: lpfc_hba pointer. 4723 * @val: unused value. 4724 * 4725 * Returns: 4726 * zero if val saved. 4727 **/ 4728 static int 4729 lpfc_force_rscn_init(struct lpfc_hba *phba, int val) 4730 { 4731 return 0; 4732 } 4733 static DEVICE_ATTR_RW(lpfc_force_rscn); 4734 4735 /** 4736 * lpfc_fcp_imax_store 4737 * 4738 * @dev: class device that is converted into a Scsi_host. 4739 * @attr: device attribute, not used. 4740 * @buf: string with the number of fast-path FCP interrupts per second. 4741 * @count: unused variable. 4742 * 4743 * Description: 4744 * If val is in a valid range [636,651042], then set the adapter's 4745 * maximum number of fast-path FCP interrupts per second. 4746 * 4747 * Returns: 4748 * length of the buf on success if val is in range the intended mode 4749 * is supported. 4750 * -EINVAL if val out of range or intended mode is not supported. 4751 **/ 4752 static ssize_t 4753 lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr, 4754 const char *buf, size_t count) 4755 { 4756 struct Scsi_Host *shost = class_to_shost(dev); 4757 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4758 struct lpfc_hba *phba = vport->phba; 4759 struct lpfc_eq_intr_info *eqi; 4760 uint32_t usdelay; 4761 int val = 0, i; 4762 4763 /* fcp_imax is only valid for SLI4 */ 4764 if (phba->sli_rev != LPFC_SLI_REV4) 4765 return -EINVAL; 4766 4767 /* Sanity check on user data */ 4768 if (!isdigit(buf[0])) 4769 return -EINVAL; 4770 if (sscanf(buf, "%i", &val) != 1) 4771 return -EINVAL; 4772 4773 /* 4774 * Value range for the HBA is [5000,5000000] 4775 * The value for each EQ depends on how many EQs are configured. 4776 * Allow value == 0 4777 */ 4778 if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX)) 4779 return -EINVAL; 4780 4781 phba->cfg_auto_imax = (val) ? 0 : 1; 4782 if (phba->cfg_fcp_imax && !val) { 4783 queue_delayed_work(phba->wq, &phba->eq_delay_work, 4784 msecs_to_jiffies(LPFC_EQ_DELAY_MSECS)); 4785 4786 for_each_present_cpu(i) { 4787 eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i); 4788 eqi->icnt = 0; 4789 } 4790 } 4791 4792 phba->cfg_fcp_imax = (uint32_t)val; 4793 4794 if (phba->cfg_fcp_imax) 4795 usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax; 4796 else 4797 usdelay = 0; 4798 4799 for (i = 0; i < phba->cfg_irq_chann; i += LPFC_MAX_EQ_DELAY_EQID_CNT) 4800 lpfc_modify_hba_eq_delay(phba, i, LPFC_MAX_EQ_DELAY_EQID_CNT, 4801 usdelay); 4802 4803 return strlen(buf); 4804 } 4805 4806 /* 4807 # lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second 4808 # for the HBA. 4809 # 4810 # Value range is [5,000 to 5,000,000]. Default value is 50,000. 4811 */ 4812 static int lpfc_fcp_imax = LPFC_DEF_IMAX; 4813 module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR); 4814 MODULE_PARM_DESC(lpfc_fcp_imax, 4815 "Set the maximum number of FCP interrupts per second per HBA"); 4816 lpfc_param_show(fcp_imax) 4817 4818 /** 4819 * lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable 4820 * @phba: lpfc_hba pointer. 4821 * @val: link speed value. 4822 * 4823 * Description: 4824 * If val is in a valid range [636,651042], then initialize the adapter's 4825 * maximum number of fast-path FCP interrupts per second. 4826 * 4827 * Returns: 4828 * zero if val saved. 4829 * -EINVAL val out of range 4830 **/ 4831 static int 4832 lpfc_fcp_imax_init(struct lpfc_hba *phba, int val) 4833 { 4834 if (phba->sli_rev != LPFC_SLI_REV4) { 4835 phba->cfg_fcp_imax = 0; 4836 return 0; 4837 } 4838 4839 if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) || 4840 (val == 0)) { 4841 phba->cfg_fcp_imax = val; 4842 return 0; 4843 } 4844 4845 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4846 "3016 lpfc_fcp_imax: %d out of range, using default\n", 4847 val); 4848 phba->cfg_fcp_imax = LPFC_DEF_IMAX; 4849 4850 return 0; 4851 } 4852 4853 static DEVICE_ATTR_RW(lpfc_fcp_imax); 4854 4855 /** 4856 * lpfc_cq_max_proc_limit_store 4857 * 4858 * @dev: class device that is converted into a Scsi_host. 4859 * @attr: device attribute, not used. 4860 * @buf: string with the cq max processing limit of cqes 4861 * @count: unused variable. 4862 * 4863 * Description: 4864 * If val is in a valid range, then set value on each cq 4865 * 4866 * Returns: 4867 * The length of the buf: if successful 4868 * -ERANGE: if val is not in the valid range 4869 * -EINVAL: if bad value format or intended mode is not supported. 4870 **/ 4871 static ssize_t 4872 lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr, 4873 const char *buf, size_t count) 4874 { 4875 struct Scsi_Host *shost = class_to_shost(dev); 4876 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4877 struct lpfc_hba *phba = vport->phba; 4878 struct lpfc_queue *eq, *cq; 4879 unsigned long val; 4880 int i; 4881 4882 /* cq_max_proc_limit is only valid for SLI4 */ 4883 if (phba->sli_rev != LPFC_SLI_REV4) 4884 return -EINVAL; 4885 4886 /* Sanity check on user data */ 4887 if (!isdigit(buf[0])) 4888 return -EINVAL; 4889 if (kstrtoul(buf, 0, &val)) 4890 return -EINVAL; 4891 4892 if (val < LPFC_CQ_MIN_PROC_LIMIT || val > LPFC_CQ_MAX_PROC_LIMIT) 4893 return -ERANGE; 4894 4895 phba->cfg_cq_max_proc_limit = (uint32_t)val; 4896 4897 /* set the values on the cq's */ 4898 for (i = 0; i < phba->cfg_irq_chann; i++) { 4899 /* Get the EQ corresponding to the IRQ vector */ 4900 eq = phba->sli4_hba.hba_eq_hdl[i].eq; 4901 if (!eq) 4902 continue; 4903 4904 list_for_each_entry(cq, &eq->child_list, list) 4905 cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit, 4906 cq->entry_count); 4907 } 4908 4909 return strlen(buf); 4910 } 4911 4912 /* 4913 * lpfc_cq_max_proc_limit: The maximum number CQE entries processed in an 4914 * itteration of CQ processing. 4915 */ 4916 static int lpfc_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT; 4917 module_param(lpfc_cq_max_proc_limit, int, 0644); 4918 MODULE_PARM_DESC(lpfc_cq_max_proc_limit, 4919 "Set the maximum number CQEs processed in an iteration of " 4920 "CQ processing"); 4921 lpfc_param_show(cq_max_proc_limit) 4922 4923 /* 4924 * lpfc_cq_poll_threshold: Set the threshold of CQE completions in a 4925 * single handler call which should request a polled completion rather 4926 * than re-enabling interrupts. 4927 */ 4928 LPFC_ATTR_RW(cq_poll_threshold, LPFC_CQ_DEF_THRESHOLD_TO_POLL, 4929 LPFC_CQ_MIN_THRESHOLD_TO_POLL, 4930 LPFC_CQ_MAX_THRESHOLD_TO_POLL, 4931 "CQE Processing Threshold to enable Polling"); 4932 4933 /** 4934 * lpfc_cq_max_proc_limit_init - Set the initial cq max_proc_limit 4935 * @phba: lpfc_hba pointer. 4936 * @val: entry limit 4937 * 4938 * Description: 4939 * If val is in a valid range, then initialize the adapter's maximum 4940 * value. 4941 * 4942 * Returns: 4943 * Always returns 0 for success, even if value not always set to 4944 * requested value. If value out of range or not supported, will fall 4945 * back to default. 4946 **/ 4947 static int 4948 lpfc_cq_max_proc_limit_init(struct lpfc_hba *phba, int val) 4949 { 4950 phba->cfg_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT; 4951 4952 if (phba->sli_rev != LPFC_SLI_REV4) 4953 return 0; 4954 4955 if (val >= LPFC_CQ_MIN_PROC_LIMIT && val <= LPFC_CQ_MAX_PROC_LIMIT) { 4956 phba->cfg_cq_max_proc_limit = val; 4957 return 0; 4958 } 4959 4960 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 4961 "0371 lpfc_cq_max_proc_limit: %d out of range, using " 4962 "default\n", 4963 phba->cfg_cq_max_proc_limit); 4964 4965 return 0; 4966 } 4967 4968 static DEVICE_ATTR_RW(lpfc_cq_max_proc_limit); 4969 4970 /** 4971 * lpfc_fcp_cpu_map_show - Display current driver CPU affinity 4972 * @dev: class converted to a Scsi_host structure. 4973 * @attr: device attribute, not used. 4974 * @buf: on return contains text describing the state of the link. 4975 * 4976 * Returns: size of formatted string. 4977 **/ 4978 static ssize_t 4979 lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr, 4980 char *buf) 4981 { 4982 struct Scsi_Host *shost = class_to_shost(dev); 4983 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 4984 struct lpfc_hba *phba = vport->phba; 4985 struct lpfc_vector_map_info *cpup; 4986 int len = 0; 4987 4988 if ((phba->sli_rev != LPFC_SLI_REV4) || 4989 (phba->intr_type != MSIX)) 4990 return len; 4991 4992 switch (phba->cfg_fcp_cpu_map) { 4993 case 0: 4994 len += scnprintf(buf + len, PAGE_SIZE-len, 4995 "fcp_cpu_map: No mapping (%d)\n", 4996 phba->cfg_fcp_cpu_map); 4997 return len; 4998 case 1: 4999 len += scnprintf(buf + len, PAGE_SIZE-len, 5000 "fcp_cpu_map: HBA centric mapping (%d): " 5001 "%d of %d CPUs online from %d possible CPUs\n", 5002 phba->cfg_fcp_cpu_map, num_online_cpus(), 5003 num_present_cpus(), 5004 phba->sli4_hba.num_possible_cpu); 5005 break; 5006 } 5007 5008 while (phba->sli4_hba.curr_disp_cpu < 5009 phba->sli4_hba.num_possible_cpu) { 5010 cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu]; 5011 5012 if (!cpu_present(phba->sli4_hba.curr_disp_cpu)) 5013 len += scnprintf(buf + len, PAGE_SIZE - len, 5014 "CPU %02d not present\n", 5015 phba->sli4_hba.curr_disp_cpu); 5016 else if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { 5017 if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY) 5018 len += scnprintf( 5019 buf + len, PAGE_SIZE - len, 5020 "CPU %02d hdwq None " 5021 "physid %d coreid %d ht %d ua %d\n", 5022 phba->sli4_hba.curr_disp_cpu, 5023 cpup->phys_id, cpup->core_id, 5024 (cpup->flag & LPFC_CPU_MAP_HYPER), 5025 (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); 5026 else 5027 len += scnprintf( 5028 buf + len, PAGE_SIZE - len, 5029 "CPU %02d EQ None hdwq %04d " 5030 "physid %d coreid %d ht %d ua %d\n", 5031 phba->sli4_hba.curr_disp_cpu, 5032 cpup->hdwq, cpup->phys_id, 5033 cpup->core_id, 5034 (cpup->flag & LPFC_CPU_MAP_HYPER), 5035 (cpup->flag & LPFC_CPU_MAP_UNASSIGN)); 5036 } else { 5037 if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY) 5038 len += scnprintf( 5039 buf + len, PAGE_SIZE - len, 5040 "CPU %02d hdwq None " 5041 "physid %d coreid %d ht %d ua %d IRQ %d\n", 5042 phba->sli4_hba.curr_disp_cpu, 5043 cpup->phys_id, 5044 cpup->core_id, 5045 (cpup->flag & LPFC_CPU_MAP_HYPER), 5046 (cpup->flag & LPFC_CPU_MAP_UNASSIGN), 5047 lpfc_get_irq(cpup->eq)); 5048 else 5049 len += scnprintf( 5050 buf + len, PAGE_SIZE - len, 5051 "CPU %02d EQ %04d hdwq %04d " 5052 "physid %d coreid %d ht %d ua %d IRQ %d\n", 5053 phba->sli4_hba.curr_disp_cpu, 5054 cpup->eq, cpup->hdwq, cpup->phys_id, 5055 cpup->core_id, 5056 (cpup->flag & LPFC_CPU_MAP_HYPER), 5057 (cpup->flag & LPFC_CPU_MAP_UNASSIGN), 5058 lpfc_get_irq(cpup->eq)); 5059 } 5060 5061 phba->sli4_hba.curr_disp_cpu++; 5062 5063 /* display max number of CPUs keeping some margin */ 5064 if (phba->sli4_hba.curr_disp_cpu < 5065 phba->sli4_hba.num_possible_cpu && 5066 (len >= (PAGE_SIZE - 64))) { 5067 len += scnprintf(buf + len, 5068 PAGE_SIZE - len, "more...\n"); 5069 break; 5070 } 5071 } 5072 5073 if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_possible_cpu) 5074 phba->sli4_hba.curr_disp_cpu = 0; 5075 5076 return len; 5077 } 5078 5079 /** 5080 * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors 5081 * @dev: class device that is converted into a Scsi_host. 5082 * @attr: device attribute, not used. 5083 * @buf: one or more lpfc_polling_flags values. 5084 * @count: not used. 5085 * 5086 * Returns: 5087 * -EINVAL - Not implemented yet. 5088 **/ 5089 static ssize_t 5090 lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr, 5091 const char *buf, size_t count) 5092 { 5093 return -EINVAL; 5094 } 5095 5096 /* 5097 # lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors 5098 # for the HBA. 5099 # 5100 # Value range is [0 to 1]. Default value is LPFC_HBA_CPU_MAP (1). 5101 # 0 - Do not affinitze IRQ vectors 5102 # 1 - Affintize HBA vectors with respect to each HBA 5103 # (start with CPU0 for each HBA) 5104 # This also defines how Hardware Queues are mapped to specific CPUs. 5105 */ 5106 static int lpfc_fcp_cpu_map = LPFC_HBA_CPU_MAP; 5107 module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR); 5108 MODULE_PARM_DESC(lpfc_fcp_cpu_map, 5109 "Defines how to map CPUs to IRQ vectors per HBA"); 5110 5111 /** 5112 * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable 5113 * @phba: lpfc_hba pointer. 5114 * @val: link speed value. 5115 * 5116 * Description: 5117 * If val is in a valid range [0-2], then affinitze the adapter's 5118 * MSIX vectors. 5119 * 5120 * Returns: 5121 * zero if val saved. 5122 * -EINVAL val out of range 5123 **/ 5124 static int 5125 lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val) 5126 { 5127 if (phba->sli_rev != LPFC_SLI_REV4) { 5128 phba->cfg_fcp_cpu_map = 0; 5129 return 0; 5130 } 5131 5132 if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) { 5133 phba->cfg_fcp_cpu_map = val; 5134 return 0; 5135 } 5136 5137 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 5138 "3326 lpfc_fcp_cpu_map: %d out of range, using " 5139 "default\n", val); 5140 phba->cfg_fcp_cpu_map = LPFC_HBA_CPU_MAP; 5141 5142 return 0; 5143 } 5144 5145 static DEVICE_ATTR_RW(lpfc_fcp_cpu_map); 5146 5147 /* 5148 # lpfc_fcp_class: Determines FC class to use for the FCP protocol. 5149 # Value range is [2,3]. Default value is 3. 5150 */ 5151 LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3, 5152 "Select Fibre Channel class of service for FCP sequences"); 5153 5154 /* 5155 # lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range 5156 # is [0,1]. Default value is 1. 5157 */ 5158 LPFC_VPORT_ATTR_RW(use_adisc, 1, 0, 1, 5159 "Use ADISC on rediscovery to authenticate FCP devices"); 5160 5161 /* 5162 # lpfc_first_burst_size: First burst size to use on the NPorts 5163 # that support first burst. 5164 # Value range is [0,65536]. Default value is 0. 5165 */ 5166 LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536, 5167 "First burst size for Targets that support first burst"); 5168 5169 /* 5170 * lpfc_nvmet_fb_size: NVME Target mode supported first burst size. 5171 * When the driver is configured as an NVME target, this value is 5172 * communicated to the NVME initiator in the PRLI response. It is 5173 * used only when the lpfc_nvme_enable_fb and lpfc_nvmet_support 5174 * parameters are set and the target is sending the PRLI RSP. 5175 * Parameter supported on physical port only - no NPIV support. 5176 * Value range is [0,65536]. Default value is 0. 5177 */ 5178 LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536, 5179 "NVME Target mode first burst size in 512B increments."); 5180 5181 /* 5182 * lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions. 5183 * For the Initiator (I), enabling this parameter means that an NVMET 5184 * PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be 5185 * processed by the initiator for subsequent NVME FCP IO. 5186 * Currently, this feature is not supported on the NVME target 5187 * Value range is [0,1]. Default value is 0 (disabled). 5188 */ 5189 LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1, 5190 "Enable First Burst feature for NVME Initiator."); 5191 5192 /* 5193 # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue 5194 # depth. Default value is 0. When the value of this parameter is zero the 5195 # SCSI command completion time is not used for controlling I/O queue depth. When 5196 # the parameter is set to a non-zero value, the I/O queue depth is controlled 5197 # to limit the I/O completion time to the parameter value. 5198 # The value is set in milliseconds. 5199 */ 5200 LPFC_VPORT_ATTR(max_scsicmpl_time, 0, 0, 60000, 5201 "Use command completion time to control queue depth"); 5202 5203 lpfc_vport_param_show(max_scsicmpl_time); 5204 static int 5205 lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val) 5206 { 5207 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 5208 struct lpfc_nodelist *ndlp, *next_ndlp; 5209 5210 if (val == vport->cfg_max_scsicmpl_time) 5211 return 0; 5212 if ((val < 0) || (val > 60000)) 5213 return -EINVAL; 5214 vport->cfg_max_scsicmpl_time = val; 5215 5216 spin_lock_irq(shost->host_lock); 5217 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { 5218 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) 5219 continue; 5220 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; 5221 } 5222 spin_unlock_irq(shost->host_lock); 5223 return 0; 5224 } 5225 lpfc_vport_param_store(max_scsicmpl_time); 5226 static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time); 5227 5228 /* 5229 # lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgement. Value 5230 # range is [0,1]. Default value is 0. 5231 */ 5232 LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support"); 5233 5234 /* 5235 # lpfc_xri_rebalancing: enable or disable XRI rebalancing feature 5236 # range is [0,1]. Default value is 1. 5237 */ 5238 LPFC_ATTR_R(xri_rebalancing, 1, 0, 1, "Enable/Disable XRI rebalancing"); 5239 5240 /* 5241 * lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds 5242 * range is [0,1]. Default value is 0. 5243 * For [0], FCP commands are issued to Work Queues based on upper layer 5244 * hardware queue index. 5245 * For [1], FCP commands are issued to a Work Queue associated with the 5246 * current CPU. 5247 * 5248 * LPFC_FCP_SCHED_BY_HDWQ == 0 5249 * LPFC_FCP_SCHED_BY_CPU == 1 5250 * 5251 * The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu 5252 * affinity for FCP/NVME I/Os through Work Queues associated with the current 5253 * CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os 5254 * through WQs will be used. 5255 */ 5256 LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_BY_CPU, 5257 LPFC_FCP_SCHED_BY_HDWQ, 5258 LPFC_FCP_SCHED_BY_CPU, 5259 "Determine scheduling algorithm for " 5260 "issuing commands [0] - Hardware Queue, [1] - Current CPU"); 5261 5262 /* 5263 * lpfc_ns_query: Determine algrithmn for NameServer queries after RSCN 5264 * range is [0,1]. Default value is 0. 5265 * For [0], GID_FT is used for NameServer queries after RSCN (default) 5266 * For [1], GID_PT is used for NameServer queries after RSCN 5267 * 5268 */ 5269 LPFC_ATTR_RW(ns_query, LPFC_NS_QUERY_GID_FT, 5270 LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_PT, 5271 "Determine algorithm NameServer queries after RSCN " 5272 "[0] - GID_FT, [1] - GID_PT"); 5273 5274 /* 5275 # lpfc_fcp2_no_tgt_reset: Determine bus reset behavior 5276 # range is [0,1]. Default value is 0. 5277 # For [0], bus reset issues target reset to ALL devices 5278 # For [1], bus reset issues target reset to non-FCP2 devices 5279 */ 5280 LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for " 5281 "FCP2 devices [0] - issue tgt reset, [1] - no tgt reset"); 5282 5283 5284 /* 5285 # lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing 5286 # cr_delay (msec) or cr_count outstanding commands. cr_delay can take 5287 # value [0,63]. cr_count can take value [1,255]. Default value of cr_delay 5288 # is 0. Default value of cr_count is 1. The cr_count feature is disabled if 5289 # cr_delay is set to 0. 5290 */ 5291 LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an " 5292 "interrupt response is generated"); 5293 5294 LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an " 5295 "interrupt response is generated"); 5296 5297 /* 5298 # lpfc_multi_ring_support: Determines how many rings to spread available 5299 # cmd/rsp IOCB entries across. 5300 # Value range is [1,2]. Default value is 1. 5301 */ 5302 LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary " 5303 "SLI rings to spread IOCB entries across"); 5304 5305 /* 5306 # lpfc_multi_ring_rctl: If lpfc_multi_ring_support is enabled, this 5307 # identifies what rctl value to configure the additional ring for. 5308 # Value range is [1,0xff]. Default value is 4 (Unsolicated Data). 5309 */ 5310 LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1, 5311 255, "Identifies RCTL for additional ring configuration"); 5312 5313 /* 5314 # lpfc_multi_ring_type: If lpfc_multi_ring_support is enabled, this 5315 # identifies what type value to configure the additional ring for. 5316 # Value range is [1,0xff]. Default value is 5 (LLC/SNAP). 5317 */ 5318 LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1, 5319 255, "Identifies TYPE for additional ring configuration"); 5320 5321 /* 5322 # lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN 5323 # 0 = SmartSAN functionality disabled (default) 5324 # 1 = SmartSAN functionality enabled 5325 # This parameter will override the value of lpfc_fdmi_on module parameter. 5326 # Value range is [0,1]. Default value is 0. 5327 */ 5328 LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality"); 5329 5330 /* 5331 # lpfc_fdmi_on: Controls FDMI support. 5332 # 0 No FDMI support 5333 # 1 Traditional FDMI support (default) 5334 # Traditional FDMI support means the driver will assume FDMI-2 support; 5335 # however, if that fails, it will fallback to FDMI-1. 5336 # If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on. 5337 # If lpfc_enable_SmartSAN is set 0, the driver uses the current value of 5338 # lpfc_fdmi_on. 5339 # Value range [0,1]. Default value is 1. 5340 */ 5341 LPFC_ATTR_R(fdmi_on, 1, 0, 1, "Enable FDMI support"); 5342 5343 /* 5344 # Specifies the maximum number of ELS cmds we can have outstanding (for 5345 # discovery). Value range is [1,64]. Default value = 32. 5346 */ 5347 LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands " 5348 "during discovery"); 5349 5350 /* 5351 # lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that 5352 # will be scanned by the SCSI midlayer when sequential scanning is 5353 # used; and is also the highest LUN ID allowed when the SCSI midlayer 5354 # parses REPORT_LUN responses. The lpfc driver has no LUN count or 5355 # LUN ID limit, but the SCSI midlayer requires this field for the uses 5356 # above. The lpfc driver limits the default value to 255 for two reasons. 5357 # As it bounds the sequential scan loop, scanning for thousands of luns 5358 # on a target can take minutes of wall clock time. Additionally, 5359 # there are FC targets, such as JBODs, that only recognize 8-bits of 5360 # LUN ID. When they receive a value greater than 8 bits, they chop off 5361 # the high order bits. In other words, they see LUN IDs 0, 256, 512, 5362 # and so on all as LUN ID 0. This causes the linux kernel, which sees 5363 # valid responses at each of the LUN IDs, to believe there are multiple 5364 # devices present, when in fact, there is only 1. 5365 # A customer that is aware of their target behaviors, and the results as 5366 # indicated above, is welcome to increase the lpfc_max_luns value. 5367 # As mentioned, this value is not used by the lpfc driver, only the 5368 # SCSI midlayer. 5369 # Value range is [0,65535]. Default value is 255. 5370 # NOTE: The SCSI layer might probe all allowed LUN on some old targets. 5371 */ 5372 LPFC_VPORT_ULL_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID"); 5373 5374 /* 5375 # lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. 5376 # Value range is [1,255], default value is 10. 5377 */ 5378 LPFC_ATTR_RW(poll_tmo, 10, 1, 255, 5379 "Milliseconds driver will wait between polling FCP ring"); 5380 5381 /* 5382 # lpfc_task_mgmt_tmo: Maximum time to wait for task management commands 5383 # to complete in seconds. Value range is [5,180], default value is 60. 5384 */ 5385 LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180, 5386 "Maximum time to wait for task management commands to complete"); 5387 /* 5388 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that 5389 # support this feature 5390 # 0 = MSI disabled 5391 # 1 = MSI enabled 5392 # 2 = MSI-X enabled (default) 5393 # Value range is [0,2]. Default value is 2. 5394 */ 5395 LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or " 5396 "MSI-X (2), if possible"); 5397 5398 /* 5399 * lpfc_nvme_oas: Use the oas bit when sending NVME/NVMET IOs 5400 * 5401 * 0 = NVME OAS disabled 5402 * 1 = NVME OAS enabled 5403 * 5404 * Value range is [0,1]. Default value is 0. 5405 */ 5406 LPFC_ATTR_RW(nvme_oas, 0, 0, 1, 5407 "Use OAS bit on NVME IOs"); 5408 5409 /* 5410 * lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs 5411 * 5412 * 0 = Put NVME Command in SGL 5413 * 1 = Embed NVME Command in WQE (unless G7) 5414 * 2 = Embed NVME Command in WQE (force) 5415 * 5416 * Value range is [0,2]. Default value is 1. 5417 */ 5418 LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2, 5419 "Embed NVME Command in WQE"); 5420 5421 /* 5422 * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues 5423 * the driver will advertise it supports to the SCSI layer. 5424 * 5425 * 0 = Set nr_hw_queues by the number of CPUs or HW queues. 5426 * 1,256 = Manually specify nr_hw_queue value to be advertised, 5427 * 5428 * Value range is [0,256]. Default value is 8. 5429 */ 5430 LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF, 5431 LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX, 5432 "Set the number of SCSI Queues advertised"); 5433 5434 /* 5435 * lpfc_hdw_queue: Set the number of Hardware Queues the driver 5436 * will advertise it supports to the NVME and SCSI layers. This also 5437 * will map to the number of CQ/WQ pairs the driver will create. 5438 * 5439 * The NVME Layer will try to create this many, plus 1 administrative 5440 * hardware queue. The administrative queue will always map to WQ 0 5441 * A hardware IO queue maps (qidx) to a specific driver CQ/WQ. 5442 * 5443 * 0 = Configure the number of hdw queues to the number of active CPUs. 5444 * 1,256 = Manually specify how many hdw queues to use. 5445 * 5446 * Value range is [0,256]. Default value is 0. 5447 */ 5448 LPFC_ATTR_R(hdw_queue, 5449 LPFC_HBA_HDWQ_DEF, 5450 LPFC_HBA_HDWQ_MIN, LPFC_HBA_HDWQ_MAX, 5451 "Set the number of I/O Hardware Queues"); 5452 5453 #if IS_ENABLED(CONFIG_X86) 5454 /** 5455 * lpfc_cpumask_irq_mode_init - initalizes cpumask of phba based on 5456 * irq_chann_mode 5457 * @phba: Pointer to HBA context object. 5458 **/ 5459 static void 5460 lpfc_cpumask_irq_mode_init(struct lpfc_hba *phba) 5461 { 5462 unsigned int cpu, first_cpu, numa_node = NUMA_NO_NODE; 5463 const struct cpumask *sibling_mask; 5464 struct cpumask *aff_mask = &phba->sli4_hba.irq_aff_mask; 5465 5466 cpumask_clear(aff_mask); 5467 5468 if (phba->irq_chann_mode == NUMA_MODE) { 5469 /* Check if we're a NUMA architecture */ 5470 numa_node = dev_to_node(&phba->pcidev->dev); 5471 if (numa_node == NUMA_NO_NODE) { 5472 phba->irq_chann_mode = NORMAL_MODE; 5473 return; 5474 } 5475 } 5476 5477 for_each_possible_cpu(cpu) { 5478 switch (phba->irq_chann_mode) { 5479 case NUMA_MODE: 5480 if (cpu_to_node(cpu) == numa_node) 5481 cpumask_set_cpu(cpu, aff_mask); 5482 break; 5483 case NHT_MODE: 5484 sibling_mask = topology_sibling_cpumask(cpu); 5485 first_cpu = cpumask_first(sibling_mask); 5486 if (first_cpu < nr_cpu_ids) 5487 cpumask_set_cpu(first_cpu, aff_mask); 5488 break; 5489 default: 5490 break; 5491 } 5492 } 5493 } 5494 #endif 5495 5496 static void 5497 lpfc_assign_default_irq_chann(struct lpfc_hba *phba) 5498 { 5499 #if IS_ENABLED(CONFIG_X86) 5500 switch (boot_cpu_data.x86_vendor) { 5501 case X86_VENDOR_AMD: 5502 /* If AMD architecture, then default is NUMA_MODE */ 5503 phba->irq_chann_mode = NUMA_MODE; 5504 break; 5505 case X86_VENDOR_INTEL: 5506 /* If Intel architecture, then default is no hyperthread mode */ 5507 phba->irq_chann_mode = NHT_MODE; 5508 break; 5509 default: 5510 phba->irq_chann_mode = NORMAL_MODE; 5511 break; 5512 } 5513 lpfc_cpumask_irq_mode_init(phba); 5514 #else 5515 phba->irq_chann_mode = NORMAL_MODE; 5516 #endif 5517 } 5518 5519 /* 5520 * lpfc_irq_chann: Set the number of IRQ vectors that are available 5521 * for Hardware Queues to utilize. This also will map to the number 5522 * of EQ / MSI-X vectors the driver will create. This should never be 5523 * more than the number of Hardware Queues 5524 * 5525 * 0 = Configure number of IRQ Channels to: 5526 * if AMD architecture, number of CPUs on HBA's NUMA node 5527 * if Intel architecture, number of physical CPUs. 5528 * otherwise, number of active CPUs. 5529 * [1,256] = Manually specify how many IRQ Channels to use. 5530 * 5531 * Value range is [0,256]. Default value is [0]. 5532 */ 5533 static uint lpfc_irq_chann = LPFC_IRQ_CHANN_DEF; 5534 module_param(lpfc_irq_chann, uint, 0444); 5535 MODULE_PARM_DESC(lpfc_irq_chann, "Set number of interrupt vectors to allocate"); 5536 5537 /* lpfc_irq_chann_init - Set the hba irq_chann initial value 5538 * @phba: lpfc_hba pointer. 5539 * @val: contains the initial value 5540 * 5541 * Description: 5542 * Validates the initial value is within range and assigns it to the 5543 * adapter. If not in range, an error message is posted and the 5544 * default value is assigned. 5545 * 5546 * Returns: 5547 * zero if value is in range and is set 5548 * -EINVAL if value was out of range 5549 **/ 5550 static int 5551 lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val) 5552 { 5553 const struct cpumask *aff_mask; 5554 5555 if (phba->cfg_use_msi != 2) { 5556 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 5557 "8532 use_msi = %u ignoring cfg_irq_numa\n", 5558 phba->cfg_use_msi); 5559 phba->irq_chann_mode = NORMAL_MODE; 5560 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; 5561 return 0; 5562 } 5563 5564 /* Check if default setting was passed */ 5565 if (val == LPFC_IRQ_CHANN_DEF && 5566 phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF && 5567 phba->sli_rev == LPFC_SLI_REV4) 5568 lpfc_assign_default_irq_chann(phba); 5569 5570 if (phba->irq_chann_mode != NORMAL_MODE) { 5571 aff_mask = &phba->sli4_hba.irq_aff_mask; 5572 5573 if (cpumask_empty(aff_mask)) { 5574 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 5575 "8533 Could not identify CPUS for " 5576 "mode %d, ignoring\n", 5577 phba->irq_chann_mode); 5578 phba->irq_chann_mode = NORMAL_MODE; 5579 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; 5580 } else { 5581 phba->cfg_irq_chann = cpumask_weight(aff_mask); 5582 5583 /* If no hyperthread mode, then set hdwq count to 5584 * aff_mask weight as well 5585 */ 5586 if (phba->irq_chann_mode == NHT_MODE) 5587 phba->cfg_hdw_queue = phba->cfg_irq_chann; 5588 5589 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 5590 "8543 lpfc_irq_chann set to %u " 5591 "(mode: %d)\n", phba->cfg_irq_chann, 5592 phba->irq_chann_mode); 5593 } 5594 } else { 5595 if (val > LPFC_IRQ_CHANN_MAX) { 5596 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 5597 "8545 lpfc_irq_chann attribute cannot " 5598 "be set to %u, allowed range is " 5599 "[%u,%u]\n", 5600 val, 5601 LPFC_IRQ_CHANN_MIN, 5602 LPFC_IRQ_CHANN_MAX); 5603 phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF; 5604 return -EINVAL; 5605 } 5606 if (phba->sli_rev == LPFC_SLI_REV4) { 5607 phba->cfg_irq_chann = val; 5608 } else { 5609 phba->cfg_irq_chann = 2; 5610 phba->cfg_hdw_queue = 1; 5611 } 5612 } 5613 5614 return 0; 5615 } 5616 5617 /** 5618 * lpfc_irq_chann_show - Display value of irq_chann 5619 * @dev: class converted to a Scsi_host structure. 5620 * @attr: device attribute, not used. 5621 * @buf: on return contains a string with the list sizes 5622 * 5623 * Returns: size of formatted string. 5624 **/ 5625 static ssize_t 5626 lpfc_irq_chann_show(struct device *dev, struct device_attribute *attr, 5627 char *buf) 5628 { 5629 struct Scsi_Host *shost = class_to_shost(dev); 5630 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 5631 struct lpfc_hba *phba = vport->phba; 5632 5633 return scnprintf(buf, PAGE_SIZE, "%u\n", phba->cfg_irq_chann); 5634 } 5635 5636 static DEVICE_ATTR_RO(lpfc_irq_chann); 5637 5638 /* 5639 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware. 5640 # 0 = HBA resets disabled 5641 # 1 = HBA resets enabled (default) 5642 # 2 = HBA reset via PCI bus reset enabled 5643 # Value range is [0,2]. Default value is 1. 5644 */ 5645 LPFC_ATTR_RW(enable_hba_reset, 1, 0, 2, "Enable HBA resets from the driver."); 5646 5647 /* 5648 # lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer.. 5649 # 0 = HBA Heartbeat disabled 5650 # 1 = HBA Heartbeat enabled (default) 5651 # Value range is [0,1]. Default value is 1. 5652 */ 5653 LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat."); 5654 5655 /* 5656 # lpfc_EnableXLane: Enable Express Lane Feature 5657 # 0x0 Express Lane Feature disabled 5658 # 0x1 Express Lane Feature enabled 5659 # Value range is [0,1]. Default value is 0. 5660 */ 5661 LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature."); 5662 5663 /* 5664 # lpfc_XLanePriority: Define CS_CTL priority for Express Lane Feature 5665 # 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits) 5666 # Value range is [0x0,0x7f]. Default value is 0 5667 */ 5668 LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature."); 5669 5670 /* 5671 # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF) 5672 # 0 = BlockGuard disabled (default) 5673 # 1 = BlockGuard enabled 5674 # Value range is [0,1]. Default value is 0. 5675 */ 5676 LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support"); 5677 5678 /* 5679 # lpfc_prot_mask: 5680 # - Bit mask of host protection capabilities used to register with the 5681 # SCSI mid-layer 5682 # - Only meaningful if BG is turned on (lpfc_enable_bg=1). 5683 # - Allows you to ultimately specify which profiles to use 5684 # - Default will result in registering capabilities for all profiles. 5685 # - SHOST_DIF_TYPE1_PROTECTION 1 5686 # HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection 5687 # - SHOST_DIX_TYPE0_PROTECTION 8 5688 # HBA supports DIX Type 0: Host to HBA protection only 5689 # - SHOST_DIX_TYPE1_PROTECTION 16 5690 # HBA supports DIX Type 1: Host to HBA Type 1 protection 5691 # 5692 */ 5693 LPFC_ATTR(prot_mask, 5694 (SHOST_DIF_TYPE1_PROTECTION | 5695 SHOST_DIX_TYPE0_PROTECTION | 5696 SHOST_DIX_TYPE1_PROTECTION), 5697 0, 5698 (SHOST_DIF_TYPE1_PROTECTION | 5699 SHOST_DIX_TYPE0_PROTECTION | 5700 SHOST_DIX_TYPE1_PROTECTION), 5701 "T10-DIF host protection capabilities mask"); 5702 5703 /* 5704 # lpfc_prot_guard: 5705 # - Bit mask of protection guard types to register with the SCSI mid-layer 5706 # - Guard types are currently either 1) T10-DIF CRC 2) IP checksum 5707 # - Allows you to ultimately specify which profiles to use 5708 # - Default will result in registering capabilities for all guard types 5709 # 5710 */ 5711 LPFC_ATTR(prot_guard, 5712 SHOST_DIX_GUARD_IP, SHOST_DIX_GUARD_CRC, SHOST_DIX_GUARD_IP, 5713 "T10-DIF host protection guard type"); 5714 5715 /* 5716 * Delay initial NPort discovery when Clean Address bit is cleared in 5717 * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed. 5718 * This parameter can have value 0 or 1. 5719 * When this parameter is set to 0, no delay is added to the initial 5720 * discovery. 5721 * When this parameter is set to non-zero value, initial Nport discovery is 5722 * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC 5723 * accept and FCID/Fabric name/Fabric portname is changed. 5724 * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion 5725 * when Clean Address bit is cleared in FLOGI/FDISC 5726 * accept and FCID/Fabric name/Fabric portname is changed. 5727 * Default value is 0. 5728 */ 5729 LPFC_ATTR(delay_discovery, 0, 0, 1, 5730 "Delay NPort discovery when Clean Address bit is cleared."); 5731 5732 /* 5733 * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count 5734 * This value can be set to values between 64 and 4096. The default value 5735 * is 64, but may be increased to allow for larger Max I/O sizes. The scsi 5736 * and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE). 5737 * Because of the additional overhead involved in setting up T10-DIF, 5738 * this parameter will be limited to 128 if BlockGuard is enabled under SLI4 5739 * and will be limited to 512 if BlockGuard is enabled under SLI3. 5740 */ 5741 static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT; 5742 module_param(lpfc_sg_seg_cnt, uint, 0444); 5743 MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count"); 5744 5745 /** 5746 * lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes 5747 * configured for the adapter 5748 * @dev: class converted to a Scsi_host structure. 5749 * @attr: device attribute, not used. 5750 * @buf: on return contains a string with the list sizes 5751 * 5752 * Returns: size of formatted string. 5753 **/ 5754 static ssize_t 5755 lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr, 5756 char *buf) 5757 { 5758 struct Scsi_Host *shost = class_to_shost(dev); 5759 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 5760 struct lpfc_hba *phba = vport->phba; 5761 int len; 5762 5763 len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n", 5764 phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt); 5765 5766 len += scnprintf(buf + len, PAGE_SIZE - len, 5767 "Cfg: %d SCSI: %d NVME: %d\n", 5768 phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt, 5769 phba->cfg_nvme_seg_cnt); 5770 return len; 5771 } 5772 5773 static DEVICE_ATTR_RO(lpfc_sg_seg_cnt); 5774 5775 /** 5776 * lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value 5777 * @phba: lpfc_hba pointer. 5778 * @val: contains the initial value 5779 * 5780 * Description: 5781 * Validates the initial value is within range and assigns it to the 5782 * adapter. If not in range, an error message is posted and the 5783 * default value is assigned. 5784 * 5785 * Returns: 5786 * zero if value is in range and is set 5787 * -EINVAL if value was out of range 5788 **/ 5789 static int 5790 lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val) 5791 { 5792 if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) { 5793 phba->cfg_sg_seg_cnt = val; 5794 return 0; 5795 } 5796 lpfc_printf_log(phba, KERN_ERR, LOG_INIT, 5797 "0409 lpfc_sg_seg_cnt attribute cannot be set to %d, " 5798 "allowed range is [%d, %d]\n", 5799 val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT); 5800 phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT; 5801 return -EINVAL; 5802 } 5803 5804 /* 5805 * lpfc_enable_mds_diags: Enable MDS Diagnostics 5806 * 0 = MDS Diagnostics disabled (default) 5807 * 1 = MDS Diagnostics enabled 5808 * Value range is [0,1]. Default value is 0. 5809 */ 5810 LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics"); 5811 5812 /* 5813 * lpfc_ras_fwlog_buffsize: Firmware logging host buffer size 5814 * 0 = Disable firmware logging (default) 5815 * [1-4] = Multiple of 1/4th Mb of host memory for FW logging 5816 * Value range [0..4]. Default value is 0 5817 */ 5818 LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging"); 5819 lpfc_param_show(ras_fwlog_buffsize); 5820 5821 static ssize_t 5822 lpfc_ras_fwlog_buffsize_set(struct lpfc_hba *phba, uint val) 5823 { 5824 int ret = 0; 5825 enum ras_state state; 5826 5827 if (!lpfc_rangecheck(val, 0, 4)) 5828 return -EINVAL; 5829 5830 if (phba->cfg_ras_fwlog_buffsize == val) 5831 return 0; 5832 5833 if (phba->cfg_ras_fwlog_func != PCI_FUNC(phba->pcidev->devfn)) 5834 return -EINVAL; 5835 5836 spin_lock_irq(&phba->hbalock); 5837 state = phba->ras_fwlog.state; 5838 spin_unlock_irq(&phba->hbalock); 5839 5840 if (state == REG_INPROGRESS) { 5841 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging " 5842 "registration is in progress\n"); 5843 return -EBUSY; 5844 } 5845 5846 /* For disable logging: stop the logs and free the DMA. 5847 * For ras_fwlog_buffsize size change we still need to free and 5848 * reallocate the DMA in lpfc_sli4_ras_fwlog_init. 5849 */ 5850 phba->cfg_ras_fwlog_buffsize = val; 5851 if (state == ACTIVE) { 5852 lpfc_ras_stop_fwlog(phba); 5853 lpfc_sli4_ras_dma_free(phba); 5854 } 5855 5856 lpfc_sli4_ras_init(phba); 5857 if (phba->ras_fwlog.ras_enabled) 5858 ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level, 5859 LPFC_RAS_ENABLE_LOGGING); 5860 return ret; 5861 } 5862 5863 lpfc_param_store(ras_fwlog_buffsize); 5864 static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize); 5865 5866 /* 5867 * lpfc_ras_fwlog_level: Firmware logging verbosity level 5868 * Valid only if firmware logging is enabled 5869 * 0(Least Verbosity) 4 (most verbosity) 5870 * Value range is [0..4]. Default value is 0 5871 */ 5872 LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level"); 5873 5874 /* 5875 * lpfc_ras_fwlog_func: Firmware logging enabled on function number 5876 * Default function which has RAS support : 0 5877 * Value Range is [0..7]. 5878 * FW logging is a global action and enablement is via a specific 5879 * port. 5880 */ 5881 LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 7, "Firmware Logging Enabled on Function"); 5882 5883 /* 5884 * lpfc_enable_bbcr: Enable BB Credit Recovery 5885 * 0 = BB Credit Recovery disabled 5886 * 1 = BB Credit Recovery enabled (default) 5887 * Value range is [0,1]. Default value is 1. 5888 */ 5889 LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery"); 5890 5891 /* Signaling module parameters */ 5892 int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */ 5893 module_param(lpfc_fabric_cgn_frequency, int, 0444); 5894 MODULE_PARM_DESC(lpfc_fabric_cgn_frequency, "Congestion signaling fabric freq"); 5895 5896 int lpfc_acqe_cgn_frequency = 10; /* 10 sec default */ 5897 module_param(lpfc_acqe_cgn_frequency, int, 0444); 5898 MODULE_PARM_DESC(lpfc_acqe_cgn_frequency, "Congestion signaling ACQE freq"); 5899 5900 int lpfc_use_cgn_signal = 1; /* 0 - only use FPINs, 1 - Use signals if avail */ 5901 module_param(lpfc_use_cgn_signal, int, 0444); 5902 MODULE_PARM_DESC(lpfc_use_cgn_signal, "Use Congestion signaling if available"); 5903 5904 /* 5905 * lpfc_enable_dpp: Enable DPP on G7 5906 * 0 = DPP on G7 disabled 5907 * 1 = DPP on G7 enabled (default) 5908 * Value range is [0,1]. Default value is 1. 5909 */ 5910 LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push"); 5911 5912 /* 5913 * lpfc_enable_mi: Enable FDMI MIB 5914 * 0 = disabled 5915 * 1 = enabled (default) 5916 * Value range is [0,1]. 5917 */ 5918 LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI"); 5919 5920 /* 5921 * lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if 5922 * either vmid_app_header or vmid_priority_tagging is enabled. 5923 * 4 - 255 = vmid support enabled for 4-255 VMs 5924 * Value range is [4,255]. 5925 */ 5926 LPFC_ATTR_RW(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID, 5927 "Maximum number of VMs supported"); 5928 5929 /* 5930 * lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours 5931 * 0 = Timeout is disabled 5932 * Value range is [0,24]. 5933 */ 5934 LPFC_ATTR_RW(vmid_inactivity_timeout, 4, 0, 24, 5935 "Inactivity timeout in hours"); 5936 5937 /* 5938 * lpfc_vmid_app_header: Enable App Header VMID support 5939 * 0 = Support is disabled (default) 5940 * 1 = Support is enabled 5941 * Value range is [0,1]. 5942 */ 5943 LPFC_ATTR_RW(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE, 5944 LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE, 5945 "Enable App Header VMID support"); 5946 5947 /* 5948 * lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support 5949 * 0 = Support is disabled (default) 5950 * 1 = Allow supported targets only 5951 * 2 = Allow all targets 5952 * Value range is [0,2]. 5953 */ 5954 LPFC_ATTR_RW(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE, 5955 LPFC_VMID_PRIO_TAG_DISABLE, 5956 LPFC_VMID_PRIO_TAG_ALL_TARGETS, 5957 "Enable Priority Tagging VMID support"); 5958 5959 static struct attribute *lpfc_hba_attrs[] = { 5960 &dev_attr_nvme_info.attr, 5961 &dev_attr_scsi_stat.attr, 5962 &dev_attr_bg_info.attr, 5963 &dev_attr_bg_guard_err.attr, 5964 &dev_attr_bg_apptag_err.attr, 5965 &dev_attr_bg_reftag_err.attr, 5966 &dev_attr_info.attr, 5967 &dev_attr_serialnum.attr, 5968 &dev_attr_modeldesc.attr, 5969 &dev_attr_modelname.attr, 5970 &dev_attr_programtype.attr, 5971 &dev_attr_portnum.attr, 5972 &dev_attr_fwrev.attr, 5973 &dev_attr_hdw.attr, 5974 &dev_attr_option_rom_version.attr, 5975 &dev_attr_link_state.attr, 5976 &dev_attr_num_discovered_ports.attr, 5977 &dev_attr_lpfc_drvr_version.attr, 5978 &dev_attr_lpfc_enable_fip.attr, 5979 &dev_attr_lpfc_temp_sensor.attr, 5980 &dev_attr_lpfc_log_verbose.attr, 5981 &dev_attr_lpfc_lun_queue_depth.attr, 5982 &dev_attr_lpfc_tgt_queue_depth.attr, 5983 &dev_attr_lpfc_hba_queue_depth.attr, 5984 &dev_attr_lpfc_peer_port_login.attr, 5985 &dev_attr_lpfc_nodev_tmo.attr, 5986 &dev_attr_lpfc_devloss_tmo.attr, 5987 &dev_attr_lpfc_enable_fc4_type.attr, 5988 &dev_attr_lpfc_fcp_class.attr, 5989 &dev_attr_lpfc_use_adisc.attr, 5990 &dev_attr_lpfc_first_burst_size.attr, 5991 &dev_attr_lpfc_ack0.attr, 5992 &dev_attr_lpfc_xri_rebalancing.attr, 5993 &dev_attr_lpfc_topology.attr, 5994 &dev_attr_lpfc_scan_down.attr, 5995 &dev_attr_lpfc_link_speed.attr, 5996 &dev_attr_lpfc_fcp_io_sched.attr, 5997 &dev_attr_lpfc_ns_query.attr, 5998 &dev_attr_lpfc_fcp2_no_tgt_reset.attr, 5999 &dev_attr_lpfc_cr_delay.attr, 6000 &dev_attr_lpfc_cr_count.attr, 6001 &dev_attr_lpfc_multi_ring_support.attr, 6002 &dev_attr_lpfc_multi_ring_rctl.attr, 6003 &dev_attr_lpfc_multi_ring_type.attr, 6004 &dev_attr_lpfc_fdmi_on.attr, 6005 &dev_attr_lpfc_enable_SmartSAN.attr, 6006 &dev_attr_lpfc_max_luns.attr, 6007 &dev_attr_lpfc_enable_npiv.attr, 6008 &dev_attr_lpfc_fcf_failover_policy.attr, 6009 &dev_attr_lpfc_enable_rrq.attr, 6010 &dev_attr_lpfc_fcp_wait_abts_rsp.attr, 6011 &dev_attr_nport_evt_cnt.attr, 6012 &dev_attr_board_mode.attr, 6013 &dev_attr_lpfc_xcvr_data.attr, 6014 &dev_attr_max_vpi.attr, 6015 &dev_attr_used_vpi.attr, 6016 &dev_attr_max_rpi.attr, 6017 &dev_attr_used_rpi.attr, 6018 &dev_attr_max_xri.attr, 6019 &dev_attr_used_xri.attr, 6020 &dev_attr_npiv_info.attr, 6021 &dev_attr_issue_reset.attr, 6022 &dev_attr_lpfc_poll.attr, 6023 &dev_attr_lpfc_poll_tmo.attr, 6024 &dev_attr_lpfc_task_mgmt_tmo.attr, 6025 &dev_attr_lpfc_use_msi.attr, 6026 &dev_attr_lpfc_nvme_oas.attr, 6027 &dev_attr_lpfc_nvme_embed_cmd.attr, 6028 &dev_attr_lpfc_fcp_imax.attr, 6029 &dev_attr_lpfc_force_rscn.attr, 6030 &dev_attr_lpfc_cq_poll_threshold.attr, 6031 &dev_attr_lpfc_cq_max_proc_limit.attr, 6032 &dev_attr_lpfc_fcp_cpu_map.attr, 6033 &dev_attr_lpfc_fcp_mq_threshold.attr, 6034 &dev_attr_lpfc_hdw_queue.attr, 6035 &dev_attr_lpfc_irq_chann.attr, 6036 &dev_attr_lpfc_suppress_rsp.attr, 6037 &dev_attr_lpfc_nvmet_mrq.attr, 6038 &dev_attr_lpfc_nvmet_mrq_post.attr, 6039 &dev_attr_lpfc_nvme_enable_fb.attr, 6040 &dev_attr_lpfc_nvmet_fb_size.attr, 6041 &dev_attr_lpfc_enable_bg.attr, 6042 &dev_attr_lpfc_enable_hba_reset.attr, 6043 &dev_attr_lpfc_enable_hba_heartbeat.attr, 6044 &dev_attr_lpfc_EnableXLane.attr, 6045 &dev_attr_lpfc_XLanePriority.attr, 6046 &dev_attr_lpfc_xlane_lun.attr, 6047 &dev_attr_lpfc_xlane_tgt.attr, 6048 &dev_attr_lpfc_xlane_vpt.attr, 6049 &dev_attr_lpfc_xlane_lun_state.attr, 6050 &dev_attr_lpfc_xlane_lun_status.attr, 6051 &dev_attr_lpfc_xlane_priority.attr, 6052 &dev_attr_lpfc_sg_seg_cnt.attr, 6053 &dev_attr_lpfc_max_scsicmpl_time.attr, 6054 &dev_attr_lpfc_aer_support.attr, 6055 &dev_attr_lpfc_aer_state_cleanup.attr, 6056 &dev_attr_lpfc_sriov_nr_virtfn.attr, 6057 &dev_attr_lpfc_req_fw_upgrade.attr, 6058 &dev_attr_lpfc_suppress_link_up.attr, 6059 &dev_attr_iocb_hw.attr, 6060 &dev_attr_pls.attr, 6061 &dev_attr_pt.attr, 6062 &dev_attr_txq_hw.attr, 6063 &dev_attr_txcmplq_hw.attr, 6064 &dev_attr_lpfc_sriov_hw_max_virtfn.attr, 6065 &dev_attr_protocol.attr, 6066 &dev_attr_lpfc_xlane_supported.attr, 6067 &dev_attr_lpfc_enable_mds_diags.attr, 6068 &dev_attr_lpfc_ras_fwlog_buffsize.attr, 6069 &dev_attr_lpfc_ras_fwlog_level.attr, 6070 &dev_attr_lpfc_ras_fwlog_func.attr, 6071 &dev_attr_lpfc_enable_bbcr.attr, 6072 &dev_attr_lpfc_enable_dpp.attr, 6073 &dev_attr_lpfc_enable_mi.attr, 6074 &dev_attr_cmf_info.attr, 6075 &dev_attr_lpfc_max_vmid.attr, 6076 &dev_attr_lpfc_vmid_inactivity_timeout.attr, 6077 &dev_attr_lpfc_vmid_app_header.attr, 6078 &dev_attr_lpfc_vmid_priority_tagging.attr, 6079 NULL, 6080 }; 6081 6082 static const struct attribute_group lpfc_hba_attr_group = { 6083 .attrs = lpfc_hba_attrs 6084 }; 6085 6086 const struct attribute_group *lpfc_hba_groups[] = { 6087 &lpfc_hba_attr_group, 6088 NULL 6089 }; 6090 6091 static struct attribute *lpfc_vport_attrs[] = { 6092 &dev_attr_info.attr, 6093 &dev_attr_link_state.attr, 6094 &dev_attr_num_discovered_ports.attr, 6095 &dev_attr_lpfc_drvr_version.attr, 6096 &dev_attr_lpfc_log_verbose.attr, 6097 &dev_attr_lpfc_lun_queue_depth.attr, 6098 &dev_attr_lpfc_tgt_queue_depth.attr, 6099 &dev_attr_lpfc_nodev_tmo.attr, 6100 &dev_attr_lpfc_devloss_tmo.attr, 6101 &dev_attr_lpfc_hba_queue_depth.attr, 6102 &dev_attr_lpfc_peer_port_login.attr, 6103 &dev_attr_lpfc_restrict_login.attr, 6104 &dev_attr_lpfc_fcp_class.attr, 6105 &dev_attr_lpfc_use_adisc.attr, 6106 &dev_attr_lpfc_first_burst_size.attr, 6107 &dev_attr_lpfc_max_luns.attr, 6108 &dev_attr_nport_evt_cnt.attr, 6109 &dev_attr_npiv_info.attr, 6110 &dev_attr_lpfc_enable_da_id.attr, 6111 &dev_attr_lpfc_max_scsicmpl_time.attr, 6112 &dev_attr_lpfc_static_vport.attr, 6113 &dev_attr_cmf_info.attr, 6114 NULL, 6115 }; 6116 6117 static const struct attribute_group lpfc_vport_attr_group = { 6118 .attrs = lpfc_vport_attrs 6119 }; 6120 6121 const struct attribute_group *lpfc_vport_groups[] = { 6122 &lpfc_vport_attr_group, 6123 NULL 6124 }; 6125 6126 /** 6127 * sysfs_ctlreg_write - Write method for writing to ctlreg 6128 * @filp: open sysfs file 6129 * @kobj: kernel kobject that contains the kernel class device. 6130 * @bin_attr: kernel attributes passed to us. 6131 * @buf: contains the data to be written to the adapter IOREG space. 6132 * @off: offset into buffer to beginning of data. 6133 * @count: bytes to transfer. 6134 * 6135 * Description: 6136 * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. 6137 * Uses the adapter io control registers to send buf contents to the adapter. 6138 * 6139 * Returns: 6140 * -ERANGE off and count combo out of range 6141 * -EINVAL off, count or buff address invalid 6142 * -EPERM adapter is offline 6143 * value of count, buf contents written 6144 **/ 6145 static ssize_t 6146 sysfs_ctlreg_write(struct file *filp, struct kobject *kobj, 6147 struct bin_attribute *bin_attr, 6148 char *buf, loff_t off, size_t count) 6149 { 6150 size_t buf_off; 6151 struct device *dev = container_of(kobj, struct device, kobj); 6152 struct Scsi_Host *shost = class_to_shost(dev); 6153 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6154 struct lpfc_hba *phba = vport->phba; 6155 6156 if (phba->sli_rev >= LPFC_SLI_REV4) 6157 return -EPERM; 6158 6159 if ((off + count) > FF_REG_AREA_SIZE) 6160 return -ERANGE; 6161 6162 if (count <= LPFC_REG_WRITE_KEY_SIZE) 6163 return 0; 6164 6165 if (off % 4 || count % 4 || (unsigned long)buf % 4) 6166 return -EINVAL; 6167 6168 /* This is to protect HBA registers from accidental writes. */ 6169 if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE)) 6170 return -EINVAL; 6171 6172 if (!(vport->fc_flag & FC_OFFLINE_MODE)) 6173 return -EPERM; 6174 6175 spin_lock_irq(&phba->hbalock); 6176 for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE; 6177 buf_off += sizeof(uint32_t)) 6178 writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)), 6179 phba->ctrl_regs_memmap_p + off + buf_off); 6180 6181 spin_unlock_irq(&phba->hbalock); 6182 6183 return count; 6184 } 6185 6186 /** 6187 * sysfs_ctlreg_read - Read method for reading from ctlreg 6188 * @filp: open sysfs file 6189 * @kobj: kernel kobject that contains the kernel class device. 6190 * @bin_attr: kernel attributes passed to us. 6191 * @buf: if successful contains the data from the adapter IOREG space. 6192 * @off: offset into buffer to beginning of data. 6193 * @count: bytes to transfer. 6194 * 6195 * Description: 6196 * Accessed via /sys/class/scsi_host/hostxxx/ctlreg. 6197 * Uses the adapter io control registers to read data into buf. 6198 * 6199 * Returns: 6200 * -ERANGE off and count combo out of range 6201 * -EINVAL off, count or buff address invalid 6202 * value of count, buf contents read 6203 **/ 6204 static ssize_t 6205 sysfs_ctlreg_read(struct file *filp, struct kobject *kobj, 6206 struct bin_attribute *bin_attr, 6207 char *buf, loff_t off, size_t count) 6208 { 6209 size_t buf_off; 6210 uint32_t * tmp_ptr; 6211 struct device *dev = container_of(kobj, struct device, kobj); 6212 struct Scsi_Host *shost = class_to_shost(dev); 6213 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6214 struct lpfc_hba *phba = vport->phba; 6215 6216 if (phba->sli_rev >= LPFC_SLI_REV4) 6217 return -EPERM; 6218 6219 if (off > FF_REG_AREA_SIZE) 6220 return -ERANGE; 6221 6222 if ((off + count) > FF_REG_AREA_SIZE) 6223 count = FF_REG_AREA_SIZE - off; 6224 6225 if (count == 0) return 0; 6226 6227 if (off % 4 || count % 4 || (unsigned long)buf % 4) 6228 return -EINVAL; 6229 6230 spin_lock_irq(&phba->hbalock); 6231 6232 for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) { 6233 tmp_ptr = (uint32_t *)(buf + buf_off); 6234 *tmp_ptr = readl(phba->ctrl_regs_memmap_p + off + buf_off); 6235 } 6236 6237 spin_unlock_irq(&phba->hbalock); 6238 6239 return count; 6240 } 6241 6242 static struct bin_attribute sysfs_ctlreg_attr = { 6243 .attr = { 6244 .name = "ctlreg", 6245 .mode = S_IRUSR | S_IWUSR, 6246 }, 6247 .size = 256, 6248 .read = sysfs_ctlreg_read, 6249 .write = sysfs_ctlreg_write, 6250 }; 6251 6252 /** 6253 * sysfs_mbox_write - Write method for writing information via mbox 6254 * @filp: open sysfs file 6255 * @kobj: kernel kobject that contains the kernel class device. 6256 * @bin_attr: kernel attributes passed to us. 6257 * @buf: contains the data to be written to sysfs mbox. 6258 * @off: offset into buffer to beginning of data. 6259 * @count: bytes to transfer. 6260 * 6261 * Description: 6262 * Deprecated function. All mailbox access from user space is performed via the 6263 * bsg interface. 6264 * 6265 * Returns: 6266 * -EPERM operation not permitted 6267 **/ 6268 static ssize_t 6269 sysfs_mbox_write(struct file *filp, struct kobject *kobj, 6270 struct bin_attribute *bin_attr, 6271 char *buf, loff_t off, size_t count) 6272 { 6273 return -EPERM; 6274 } 6275 6276 /** 6277 * sysfs_mbox_read - Read method for reading information via mbox 6278 * @filp: open sysfs file 6279 * @kobj: kernel kobject that contains the kernel class device. 6280 * @bin_attr: kernel attributes passed to us. 6281 * @buf: contains the data to be read from sysfs mbox. 6282 * @off: offset into buffer to beginning of data. 6283 * @count: bytes to transfer. 6284 * 6285 * Description: 6286 * Deprecated function. All mailbox access from user space is performed via the 6287 * bsg interface. 6288 * 6289 * Returns: 6290 * -EPERM operation not permitted 6291 **/ 6292 static ssize_t 6293 sysfs_mbox_read(struct file *filp, struct kobject *kobj, 6294 struct bin_attribute *bin_attr, 6295 char *buf, loff_t off, size_t count) 6296 { 6297 return -EPERM; 6298 } 6299 6300 static struct bin_attribute sysfs_mbox_attr = { 6301 .attr = { 6302 .name = "mbox", 6303 .mode = S_IRUSR | S_IWUSR, 6304 }, 6305 .size = MAILBOX_SYSFS_MAX, 6306 .read = sysfs_mbox_read, 6307 .write = sysfs_mbox_write, 6308 }; 6309 6310 /** 6311 * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries 6312 * @vport: address of lpfc vport structure. 6313 * 6314 * Return codes: 6315 * zero on success 6316 * error return code from sysfs_create_bin_file() 6317 **/ 6318 int 6319 lpfc_alloc_sysfs_attr(struct lpfc_vport *vport) 6320 { 6321 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 6322 int error; 6323 6324 /* Virtual ports do not need ctrl_reg and mbox */ 6325 if (vport->port_type == LPFC_NPIV_PORT) 6326 return 0; 6327 6328 error = sysfs_create_bin_file(&shost->shost_dev.kobj, 6329 &sysfs_ctlreg_attr); 6330 if (error) 6331 goto out; 6332 6333 error = sysfs_create_bin_file(&shost->shost_dev.kobj, 6334 &sysfs_mbox_attr); 6335 if (error) 6336 goto out_remove_ctlreg_attr; 6337 6338 return 0; 6339 out_remove_ctlreg_attr: 6340 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); 6341 out: 6342 return error; 6343 } 6344 6345 /** 6346 * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries 6347 * @vport: address of lpfc vport structure. 6348 **/ 6349 void 6350 lpfc_free_sysfs_attr(struct lpfc_vport *vport) 6351 { 6352 struct Scsi_Host *shost = lpfc_shost_from_vport(vport); 6353 6354 /* Virtual ports do not need ctrl_reg and mbox */ 6355 if (vport->port_type == LPFC_NPIV_PORT) 6356 return; 6357 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr); 6358 sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr); 6359 } 6360 6361 /* 6362 * Dynamic FC Host Attributes Support 6363 */ 6364 6365 /** 6366 * lpfc_get_host_symbolic_name - Copy symbolic name into the scsi host 6367 * @shost: kernel scsi host pointer. 6368 **/ 6369 static void 6370 lpfc_get_host_symbolic_name(struct Scsi_Host *shost) 6371 { 6372 struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; 6373 6374 lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost), 6375 sizeof fc_host_symbolic_name(shost)); 6376 } 6377 6378 /** 6379 * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id 6380 * @shost: kernel scsi host pointer. 6381 **/ 6382 static void 6383 lpfc_get_host_port_id(struct Scsi_Host *shost) 6384 { 6385 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6386 6387 /* note: fc_myDID already in cpu endianness */ 6388 fc_host_port_id(shost) = vport->fc_myDID; 6389 } 6390 6391 /** 6392 * lpfc_get_host_port_type - Set the value of the scsi host port type 6393 * @shost: kernel scsi host pointer. 6394 **/ 6395 static void 6396 lpfc_get_host_port_type(struct Scsi_Host *shost) 6397 { 6398 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6399 struct lpfc_hba *phba = vport->phba; 6400 6401 spin_lock_irq(shost->host_lock); 6402 6403 if (vport->port_type == LPFC_NPIV_PORT) { 6404 fc_host_port_type(shost) = FC_PORTTYPE_NPIV; 6405 } else if (lpfc_is_link_up(phba)) { 6406 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 6407 if (vport->fc_flag & FC_PUBLIC_LOOP) 6408 fc_host_port_type(shost) = FC_PORTTYPE_NLPORT; 6409 else 6410 fc_host_port_type(shost) = FC_PORTTYPE_LPORT; 6411 } else { 6412 if (vport->fc_flag & FC_FABRIC) 6413 fc_host_port_type(shost) = FC_PORTTYPE_NPORT; 6414 else 6415 fc_host_port_type(shost) = FC_PORTTYPE_PTP; 6416 } 6417 } else 6418 fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN; 6419 6420 spin_unlock_irq(shost->host_lock); 6421 } 6422 6423 /** 6424 * lpfc_get_host_port_state - Set the value of the scsi host port state 6425 * @shost: kernel scsi host pointer. 6426 **/ 6427 static void 6428 lpfc_get_host_port_state(struct Scsi_Host *shost) 6429 { 6430 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6431 struct lpfc_hba *phba = vport->phba; 6432 6433 spin_lock_irq(shost->host_lock); 6434 6435 if (vport->fc_flag & FC_OFFLINE_MODE) 6436 fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; 6437 else { 6438 switch (phba->link_state) { 6439 case LPFC_LINK_UNKNOWN: 6440 case LPFC_LINK_DOWN: 6441 fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; 6442 break; 6443 case LPFC_LINK_UP: 6444 case LPFC_CLEAR_LA: 6445 case LPFC_HBA_READY: 6446 /* Links up, reports port state accordingly */ 6447 if (vport->port_state < LPFC_VPORT_READY) 6448 fc_host_port_state(shost) = 6449 FC_PORTSTATE_BYPASSED; 6450 else 6451 fc_host_port_state(shost) = 6452 FC_PORTSTATE_ONLINE; 6453 break; 6454 case LPFC_HBA_ERROR: 6455 fc_host_port_state(shost) = FC_PORTSTATE_ERROR; 6456 break; 6457 default: 6458 fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; 6459 break; 6460 } 6461 } 6462 6463 spin_unlock_irq(shost->host_lock); 6464 } 6465 6466 /** 6467 * lpfc_get_host_speed - Set the value of the scsi host speed 6468 * @shost: kernel scsi host pointer. 6469 **/ 6470 static void 6471 lpfc_get_host_speed(struct Scsi_Host *shost) 6472 { 6473 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6474 struct lpfc_hba *phba = vport->phba; 6475 6476 spin_lock_irq(shost->host_lock); 6477 6478 if ((lpfc_is_link_up(phba)) && (!(phba->hba_flag & HBA_FCOE_MODE))) { 6479 switch(phba->fc_linkspeed) { 6480 case LPFC_LINK_SPEED_1GHZ: 6481 fc_host_speed(shost) = FC_PORTSPEED_1GBIT; 6482 break; 6483 case LPFC_LINK_SPEED_2GHZ: 6484 fc_host_speed(shost) = FC_PORTSPEED_2GBIT; 6485 break; 6486 case LPFC_LINK_SPEED_4GHZ: 6487 fc_host_speed(shost) = FC_PORTSPEED_4GBIT; 6488 break; 6489 case LPFC_LINK_SPEED_8GHZ: 6490 fc_host_speed(shost) = FC_PORTSPEED_8GBIT; 6491 break; 6492 case LPFC_LINK_SPEED_10GHZ: 6493 fc_host_speed(shost) = FC_PORTSPEED_10GBIT; 6494 break; 6495 case LPFC_LINK_SPEED_16GHZ: 6496 fc_host_speed(shost) = FC_PORTSPEED_16GBIT; 6497 break; 6498 case LPFC_LINK_SPEED_32GHZ: 6499 fc_host_speed(shost) = FC_PORTSPEED_32GBIT; 6500 break; 6501 case LPFC_LINK_SPEED_64GHZ: 6502 fc_host_speed(shost) = FC_PORTSPEED_64GBIT; 6503 break; 6504 case LPFC_LINK_SPEED_128GHZ: 6505 fc_host_speed(shost) = FC_PORTSPEED_128GBIT; 6506 break; 6507 case LPFC_LINK_SPEED_256GHZ: 6508 fc_host_speed(shost) = FC_PORTSPEED_256GBIT; 6509 break; 6510 default: 6511 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; 6512 break; 6513 } 6514 } else if (lpfc_is_link_up(phba) && (phba->hba_flag & HBA_FCOE_MODE)) { 6515 switch (phba->fc_linkspeed) { 6516 case LPFC_ASYNC_LINK_SPEED_1GBPS: 6517 fc_host_speed(shost) = FC_PORTSPEED_1GBIT; 6518 break; 6519 case LPFC_ASYNC_LINK_SPEED_10GBPS: 6520 fc_host_speed(shost) = FC_PORTSPEED_10GBIT; 6521 break; 6522 case LPFC_ASYNC_LINK_SPEED_20GBPS: 6523 fc_host_speed(shost) = FC_PORTSPEED_20GBIT; 6524 break; 6525 case LPFC_ASYNC_LINK_SPEED_25GBPS: 6526 fc_host_speed(shost) = FC_PORTSPEED_25GBIT; 6527 break; 6528 case LPFC_ASYNC_LINK_SPEED_40GBPS: 6529 fc_host_speed(shost) = FC_PORTSPEED_40GBIT; 6530 break; 6531 case LPFC_ASYNC_LINK_SPEED_100GBPS: 6532 fc_host_speed(shost) = FC_PORTSPEED_100GBIT; 6533 break; 6534 default: 6535 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; 6536 break; 6537 } 6538 } else 6539 fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; 6540 6541 spin_unlock_irq(shost->host_lock); 6542 } 6543 6544 /** 6545 * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name 6546 * @shost: kernel scsi host pointer. 6547 **/ 6548 static void 6549 lpfc_get_host_fabric_name (struct Scsi_Host *shost) 6550 { 6551 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6552 struct lpfc_hba *phba = vport->phba; 6553 u64 node_name; 6554 6555 spin_lock_irq(shost->host_lock); 6556 6557 if ((vport->port_state > LPFC_FLOGI) && 6558 ((vport->fc_flag & FC_FABRIC) || 6559 ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) && 6560 (vport->fc_flag & FC_PUBLIC_LOOP)))) 6561 node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn); 6562 else 6563 /* fabric is local port if there is no F/FL_Port */ 6564 node_name = 0; 6565 6566 spin_unlock_irq(shost->host_lock); 6567 6568 fc_host_fabric_name(shost) = node_name; 6569 } 6570 6571 /** 6572 * lpfc_get_stats - Return statistical information about the adapter 6573 * @shost: kernel scsi host pointer. 6574 * 6575 * Notes: 6576 * NULL on error for link down, no mbox pool, sli2 active, 6577 * management not allowed, memory allocation error, or mbox error. 6578 * 6579 * Returns: 6580 * NULL for error 6581 * address of the adapter host statistics 6582 **/ 6583 static struct fc_host_statistics * 6584 lpfc_get_stats(struct Scsi_Host *shost) 6585 { 6586 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6587 struct lpfc_hba *phba = vport->phba; 6588 struct lpfc_sli *psli = &phba->sli; 6589 struct fc_host_statistics *hs = &phba->link_stats; 6590 struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets; 6591 LPFC_MBOXQ_t *pmboxq; 6592 MAILBOX_t *pmb; 6593 int rc = 0; 6594 6595 /* 6596 * prevent udev from issuing mailbox commands until the port is 6597 * configured. 6598 */ 6599 if (phba->link_state < LPFC_LINK_DOWN || 6600 !phba->mbox_mem_pool || 6601 (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0) 6602 return NULL; 6603 6604 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) 6605 return NULL; 6606 6607 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 6608 if (!pmboxq) 6609 return NULL; 6610 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); 6611 6612 pmb = &pmboxq->u.mb; 6613 pmb->mbxCommand = MBX_READ_STATUS; 6614 pmb->mbxOwner = OWN_HOST; 6615 pmboxq->ctx_buf = NULL; 6616 pmboxq->vport = vport; 6617 6618 if (vport->fc_flag & FC_OFFLINE_MODE) { 6619 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); 6620 if (rc != MBX_SUCCESS) { 6621 mempool_free(pmboxq, phba->mbox_mem_pool); 6622 return NULL; 6623 } 6624 } else { 6625 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); 6626 if (rc != MBX_SUCCESS) { 6627 if (rc != MBX_TIMEOUT) 6628 mempool_free(pmboxq, phba->mbox_mem_pool); 6629 return NULL; 6630 } 6631 } 6632 6633 memset(hs, 0, sizeof (struct fc_host_statistics)); 6634 6635 hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt; 6636 hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt; 6637 6638 /* 6639 * The MBX_READ_STATUS returns tx_k_bytes which has to be 6640 * converted to words. 6641 * 6642 * Check if extended byte flag is set, to know when to collect upper 6643 * bits of 64 bit wide statistics counter. 6644 */ 6645 if (pmb->un.varRdStatus.xkb & RD_ST_XKB) { 6646 hs->tx_words = (u64) 6647 ((((u64)(pmb->un.varRdStatus.xmit_xkb & 6648 RD_ST_XMIT_XKB_MASK) << 32) | 6649 (u64)pmb->un.varRdStatus.xmitByteCnt) * 6650 (u64)256); 6651 hs->rx_words = (u64) 6652 ((((u64)(pmb->un.varRdStatus.rcv_xkb & 6653 RD_ST_RCV_XKB_MASK) << 32) | 6654 (u64)pmb->un.varRdStatus.rcvByteCnt) * 6655 (u64)256); 6656 } else { 6657 hs->tx_words = (uint64_t) 6658 ((uint64_t)pmb->un.varRdStatus.xmitByteCnt 6659 * (uint64_t)256); 6660 hs->rx_words = (uint64_t) 6661 ((uint64_t)pmb->un.varRdStatus.rcvByteCnt 6662 * (uint64_t)256); 6663 } 6664 6665 memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t)); 6666 pmb->mbxCommand = MBX_READ_LNK_STAT; 6667 pmb->mbxOwner = OWN_HOST; 6668 pmboxq->ctx_buf = NULL; 6669 pmboxq->vport = vport; 6670 6671 if (vport->fc_flag & FC_OFFLINE_MODE) { 6672 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); 6673 if (rc != MBX_SUCCESS) { 6674 mempool_free(pmboxq, phba->mbox_mem_pool); 6675 return NULL; 6676 } 6677 } else { 6678 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); 6679 if (rc != MBX_SUCCESS) { 6680 if (rc != MBX_TIMEOUT) 6681 mempool_free(pmboxq, phba->mbox_mem_pool); 6682 return NULL; 6683 } 6684 } 6685 6686 hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; 6687 hs->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; 6688 hs->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; 6689 hs->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; 6690 hs->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; 6691 hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt; 6692 hs->error_frames = pmb->un.varRdLnk.crcCnt; 6693 6694 hs->cn_sig_warn = atomic64_read(&phba->cgn_acqe_stat.warn); 6695 hs->cn_sig_alarm = atomic64_read(&phba->cgn_acqe_stat.alarm); 6696 6697 hs->link_failure_count -= lso->link_failure_count; 6698 hs->loss_of_sync_count -= lso->loss_of_sync_count; 6699 hs->loss_of_signal_count -= lso->loss_of_signal_count; 6700 hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count; 6701 hs->invalid_tx_word_count -= lso->invalid_tx_word_count; 6702 hs->invalid_crc_count -= lso->invalid_crc_count; 6703 hs->error_frames -= lso->error_frames; 6704 6705 if (phba->hba_flag & HBA_FCOE_MODE) { 6706 hs->lip_count = -1; 6707 hs->nos_count = (phba->link_events >> 1); 6708 hs->nos_count -= lso->link_events; 6709 } else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { 6710 hs->lip_count = (phba->fc_eventTag >> 1); 6711 hs->lip_count -= lso->link_events; 6712 hs->nos_count = -1; 6713 } else { 6714 hs->lip_count = -1; 6715 hs->nos_count = (phba->fc_eventTag >> 1); 6716 hs->nos_count -= lso->link_events; 6717 } 6718 6719 hs->dumped_frames = -1; 6720 6721 hs->seconds_since_last_reset = ktime_get_seconds() - psli->stats_start; 6722 6723 mempool_free(pmboxq, phba->mbox_mem_pool); 6724 6725 return hs; 6726 } 6727 6728 /** 6729 * lpfc_reset_stats - Copy the adapter link stats information 6730 * @shost: kernel scsi host pointer. 6731 **/ 6732 static void 6733 lpfc_reset_stats(struct Scsi_Host *shost) 6734 { 6735 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6736 struct lpfc_hba *phba = vport->phba; 6737 struct lpfc_sli *psli = &phba->sli; 6738 struct lpfc_lnk_stat *lso = &psli->lnk_stat_offsets; 6739 LPFC_MBOXQ_t *pmboxq; 6740 MAILBOX_t *pmb; 6741 int rc = 0; 6742 6743 if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) 6744 return; 6745 6746 pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); 6747 if (!pmboxq) 6748 return; 6749 memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); 6750 6751 pmb = &pmboxq->u.mb; 6752 pmb->mbxCommand = MBX_READ_STATUS; 6753 pmb->mbxOwner = OWN_HOST; 6754 pmb->un.varWords[0] = 0x1; /* reset request */ 6755 pmboxq->ctx_buf = NULL; 6756 pmboxq->vport = vport; 6757 6758 if ((vport->fc_flag & FC_OFFLINE_MODE) || 6759 (!(psli->sli_flag & LPFC_SLI_ACTIVE))) { 6760 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); 6761 if (rc != MBX_SUCCESS) { 6762 mempool_free(pmboxq, phba->mbox_mem_pool); 6763 return; 6764 } 6765 } else { 6766 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); 6767 if (rc != MBX_SUCCESS) { 6768 if (rc != MBX_TIMEOUT) 6769 mempool_free(pmboxq, phba->mbox_mem_pool); 6770 return; 6771 } 6772 } 6773 6774 memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); 6775 pmb->mbxCommand = MBX_READ_LNK_STAT; 6776 pmb->mbxOwner = OWN_HOST; 6777 pmboxq->ctx_buf = NULL; 6778 pmboxq->vport = vport; 6779 6780 if ((vport->fc_flag & FC_OFFLINE_MODE) || 6781 (!(psli->sli_flag & LPFC_SLI_ACTIVE))) { 6782 rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); 6783 if (rc != MBX_SUCCESS) { 6784 mempool_free(pmboxq, phba->mbox_mem_pool); 6785 return; 6786 } 6787 } else { 6788 rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); 6789 if (rc != MBX_SUCCESS) { 6790 if (rc != MBX_TIMEOUT) 6791 mempool_free(pmboxq, phba->mbox_mem_pool); 6792 return; 6793 } 6794 } 6795 6796 lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt; 6797 lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt; 6798 lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt; 6799 lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt; 6800 lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord; 6801 lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt; 6802 lso->error_frames = pmb->un.varRdLnk.crcCnt; 6803 if (phba->hba_flag & HBA_FCOE_MODE) 6804 lso->link_events = (phba->link_events >> 1); 6805 else 6806 lso->link_events = (phba->fc_eventTag >> 1); 6807 6808 atomic64_set(&phba->cgn_acqe_stat.warn, 0); 6809 atomic64_set(&phba->cgn_acqe_stat.alarm, 0); 6810 6811 memset(&shost_to_fc_host(shost)->fpin_stats, 0, 6812 sizeof(shost_to_fc_host(shost)->fpin_stats)); 6813 6814 psli->stats_start = ktime_get_seconds(); 6815 6816 mempool_free(pmboxq, phba->mbox_mem_pool); 6817 6818 return; 6819 } 6820 6821 /* 6822 * The LPFC driver treats linkdown handling as target loss events so there 6823 * are no sysfs handlers for link_down_tmo. 6824 */ 6825 6826 /** 6827 * lpfc_get_node_by_target - Return the nodelist for a target 6828 * @starget: kernel scsi target pointer. 6829 * 6830 * Returns: 6831 * address of the node list if found 6832 * NULL target not found 6833 **/ 6834 static struct lpfc_nodelist * 6835 lpfc_get_node_by_target(struct scsi_target *starget) 6836 { 6837 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); 6838 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; 6839 struct lpfc_nodelist *ndlp; 6840 6841 spin_lock_irq(shost->host_lock); 6842 /* Search for this, mapped, target ID */ 6843 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { 6844 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE && 6845 starget->id == ndlp->nlp_sid) { 6846 spin_unlock_irq(shost->host_lock); 6847 return ndlp; 6848 } 6849 } 6850 spin_unlock_irq(shost->host_lock); 6851 return NULL; 6852 } 6853 6854 /** 6855 * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1 6856 * @starget: kernel scsi target pointer. 6857 **/ 6858 static void 6859 lpfc_get_starget_port_id(struct scsi_target *starget) 6860 { 6861 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); 6862 6863 fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1; 6864 } 6865 6866 /** 6867 * lpfc_get_starget_node_name - Set the target node name 6868 * @starget: kernel scsi target pointer. 6869 * 6870 * Description: Set the target node name to the ndlp node name wwn or zero. 6871 **/ 6872 static void 6873 lpfc_get_starget_node_name(struct scsi_target *starget) 6874 { 6875 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); 6876 6877 fc_starget_node_name(starget) = 6878 ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0; 6879 } 6880 6881 /** 6882 * lpfc_get_starget_port_name - Set the target port name 6883 * @starget: kernel scsi target pointer. 6884 * 6885 * Description: set the target port name to the ndlp port name wwn or zero. 6886 **/ 6887 static void 6888 lpfc_get_starget_port_name(struct scsi_target *starget) 6889 { 6890 struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget); 6891 6892 fc_starget_port_name(starget) = 6893 ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0; 6894 } 6895 6896 /** 6897 * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo 6898 * @rport: fc rport address. 6899 * @timeout: new value for dev loss tmo. 6900 * 6901 * Description: 6902 * If timeout is non zero set the dev_loss_tmo to timeout, else set 6903 * dev_loss_tmo to one. 6904 **/ 6905 static void 6906 lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout) 6907 { 6908 struct lpfc_rport_data *rdata = rport->dd_data; 6909 struct lpfc_nodelist *ndlp = rdata->pnode; 6910 #if (IS_ENABLED(CONFIG_NVME_FC)) 6911 struct lpfc_nvme_rport *nrport = NULL; 6912 #endif 6913 6914 if (timeout) 6915 rport->dev_loss_tmo = timeout; 6916 else 6917 rport->dev_loss_tmo = 1; 6918 6919 if (!ndlp) { 6920 dev_info(&rport->dev, "Cannot find remote node to " 6921 "set rport dev loss tmo, port_id x%x\n", 6922 rport->port_id); 6923 return; 6924 } 6925 6926 #if (IS_ENABLED(CONFIG_NVME_FC)) 6927 nrport = lpfc_ndlp_get_nrport(ndlp); 6928 6929 if (nrport && nrport->remoteport) 6930 nvme_fc_set_remoteport_devloss(nrport->remoteport, 6931 rport->dev_loss_tmo); 6932 #endif 6933 } 6934 6935 /* 6936 * lpfc_rport_show_function - Return rport target information 6937 * 6938 * Description: 6939 * Macro that uses field to generate a function with the name lpfc_show_rport_ 6940 * 6941 * lpfc_show_rport_##field: returns the bytes formatted in buf 6942 * @cdev: class converted to an fc_rport. 6943 * @buf: on return contains the target_field or zero. 6944 * 6945 * Returns: size of formatted string. 6946 **/ 6947 #define lpfc_rport_show_function(field, format_string, sz, cast) \ 6948 static ssize_t \ 6949 lpfc_show_rport_##field (struct device *dev, \ 6950 struct device_attribute *attr, \ 6951 char *buf) \ 6952 { \ 6953 struct fc_rport *rport = transport_class_to_rport(dev); \ 6954 struct lpfc_rport_data *rdata = rport->hostdata; \ 6955 return scnprintf(buf, sz, format_string, \ 6956 (rdata->target) ? cast rdata->target->field : 0); \ 6957 } 6958 6959 #define lpfc_rport_rd_attr(field, format_string, sz) \ 6960 lpfc_rport_show_function(field, format_string, sz, ) \ 6961 static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL) 6962 6963 /** 6964 * lpfc_set_vport_symbolic_name - Set the vport's symbolic name 6965 * @fc_vport: The fc_vport who's symbolic name has been changed. 6966 * 6967 * Description: 6968 * This function is called by the transport after the @fc_vport's symbolic name 6969 * has been changed. This function re-registers the symbolic name with the 6970 * switch to propagate the change into the fabric if the vport is active. 6971 **/ 6972 static void 6973 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport) 6974 { 6975 struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; 6976 6977 if (vport->port_state == LPFC_VPORT_READY) 6978 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); 6979 } 6980 6981 /** 6982 * lpfc_hba_log_verbose_init - Set hba's log verbose level 6983 * @phba: Pointer to lpfc_hba struct. 6984 * @verbose: Verbose level to set. 6985 * 6986 * This function is called by the lpfc_get_cfgparam() routine to set the 6987 * module lpfc_log_verbose into the @phba cfg_log_verbose for use with 6988 * log message according to the module's lpfc_log_verbose parameter setting 6989 * before hba port or vport created. 6990 **/ 6991 static void 6992 lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose) 6993 { 6994 phba->cfg_log_verbose = verbose; 6995 } 6996 6997 struct fc_function_template lpfc_transport_functions = { 6998 /* fixed attributes the driver supports */ 6999 .show_host_node_name = 1, 7000 .show_host_port_name = 1, 7001 .show_host_supported_classes = 1, 7002 .show_host_supported_fc4s = 1, 7003 .show_host_supported_speeds = 1, 7004 .show_host_maxframe_size = 1, 7005 7006 .get_host_symbolic_name = lpfc_get_host_symbolic_name, 7007 .show_host_symbolic_name = 1, 7008 7009 /* dynamic attributes the driver supports */ 7010 .get_host_port_id = lpfc_get_host_port_id, 7011 .show_host_port_id = 1, 7012 7013 .get_host_port_type = lpfc_get_host_port_type, 7014 .show_host_port_type = 1, 7015 7016 .get_host_port_state = lpfc_get_host_port_state, 7017 .show_host_port_state = 1, 7018 7019 /* active_fc4s is shown but doesn't change (thus no get function) */ 7020 .show_host_active_fc4s = 1, 7021 7022 .get_host_speed = lpfc_get_host_speed, 7023 .show_host_speed = 1, 7024 7025 .get_host_fabric_name = lpfc_get_host_fabric_name, 7026 .show_host_fabric_name = 1, 7027 7028 /* 7029 * The LPFC driver treats linkdown handling as target loss events 7030 * so there are no sysfs handlers for link_down_tmo. 7031 */ 7032 7033 .get_fc_host_stats = lpfc_get_stats, 7034 .reset_fc_host_stats = lpfc_reset_stats, 7035 7036 .dd_fcrport_size = sizeof(struct lpfc_rport_data), 7037 .show_rport_maxframe_size = 1, 7038 .show_rport_supported_classes = 1, 7039 7040 .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, 7041 .show_rport_dev_loss_tmo = 1, 7042 7043 .get_starget_port_id = lpfc_get_starget_port_id, 7044 .show_starget_port_id = 1, 7045 7046 .get_starget_node_name = lpfc_get_starget_node_name, 7047 .show_starget_node_name = 1, 7048 7049 .get_starget_port_name = lpfc_get_starget_port_name, 7050 .show_starget_port_name = 1, 7051 7052 .issue_fc_host_lip = lpfc_issue_lip, 7053 .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, 7054 .terminate_rport_io = lpfc_terminate_rport_io, 7055 7056 .dd_fcvport_size = sizeof(struct lpfc_vport *), 7057 7058 .vport_disable = lpfc_vport_disable, 7059 7060 .set_vport_symbolic_name = lpfc_set_vport_symbolic_name, 7061 7062 .bsg_request = lpfc_bsg_request, 7063 .bsg_timeout = lpfc_bsg_timeout, 7064 }; 7065 7066 struct fc_function_template lpfc_vport_transport_functions = { 7067 /* fixed attributes the driver supports */ 7068 .show_host_node_name = 1, 7069 .show_host_port_name = 1, 7070 .show_host_supported_classes = 1, 7071 .show_host_supported_fc4s = 1, 7072 .show_host_supported_speeds = 1, 7073 .show_host_maxframe_size = 1, 7074 7075 .get_host_symbolic_name = lpfc_get_host_symbolic_name, 7076 .show_host_symbolic_name = 1, 7077 7078 /* dynamic attributes the driver supports */ 7079 .get_host_port_id = lpfc_get_host_port_id, 7080 .show_host_port_id = 1, 7081 7082 .get_host_port_type = lpfc_get_host_port_type, 7083 .show_host_port_type = 1, 7084 7085 .get_host_port_state = lpfc_get_host_port_state, 7086 .show_host_port_state = 1, 7087 7088 /* active_fc4s is shown but doesn't change (thus no get function) */ 7089 .show_host_active_fc4s = 1, 7090 7091 .get_host_speed = lpfc_get_host_speed, 7092 .show_host_speed = 1, 7093 7094 .get_host_fabric_name = lpfc_get_host_fabric_name, 7095 .show_host_fabric_name = 1, 7096 7097 /* 7098 * The LPFC driver treats linkdown handling as target loss events 7099 * so there are no sysfs handlers for link_down_tmo. 7100 */ 7101 7102 .get_fc_host_stats = lpfc_get_stats, 7103 .reset_fc_host_stats = lpfc_reset_stats, 7104 7105 .dd_fcrport_size = sizeof(struct lpfc_rport_data), 7106 .show_rport_maxframe_size = 1, 7107 .show_rport_supported_classes = 1, 7108 7109 .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, 7110 .show_rport_dev_loss_tmo = 1, 7111 7112 .get_starget_port_id = lpfc_get_starget_port_id, 7113 .show_starget_port_id = 1, 7114 7115 .get_starget_node_name = lpfc_get_starget_node_name, 7116 .show_starget_node_name = 1, 7117 7118 .get_starget_port_name = lpfc_get_starget_port_name, 7119 .show_starget_port_name = 1, 7120 7121 .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, 7122 .terminate_rport_io = lpfc_terminate_rport_io, 7123 7124 .vport_disable = lpfc_vport_disable, 7125 7126 .set_vport_symbolic_name = lpfc_set_vport_symbolic_name, 7127 }; 7128 7129 /** 7130 * lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE 7131 * Mode 7132 * @phba: lpfc_hba pointer. 7133 **/ 7134 static void 7135 lpfc_get_hba_function_mode(struct lpfc_hba *phba) 7136 { 7137 /* If the adapter supports FCoE mode */ 7138 switch (phba->pcidev->device) { 7139 case PCI_DEVICE_ID_SKYHAWK: 7140 case PCI_DEVICE_ID_SKYHAWK_VF: 7141 case PCI_DEVICE_ID_LANCER_FCOE: 7142 case PCI_DEVICE_ID_LANCER_FCOE_VF: 7143 case PCI_DEVICE_ID_ZEPHYR_DCSP: 7144 case PCI_DEVICE_ID_TIGERSHARK: 7145 case PCI_DEVICE_ID_TOMCAT: 7146 phba->hba_flag |= HBA_FCOE_MODE; 7147 break; 7148 default: 7149 /* for others, clear the flag */ 7150 phba->hba_flag &= ~HBA_FCOE_MODE; 7151 } 7152 } 7153 7154 /** 7155 * lpfc_get_cfgparam - Used during probe_one to init the adapter structure 7156 * @phba: lpfc_hba pointer. 7157 **/ 7158 void 7159 lpfc_get_cfgparam(struct lpfc_hba *phba) 7160 { 7161 lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); 7162 lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched); 7163 lpfc_ns_query_init(phba, lpfc_ns_query); 7164 lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset); 7165 lpfc_cr_delay_init(phba, lpfc_cr_delay); 7166 lpfc_cr_count_init(phba, lpfc_cr_count); 7167 lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support); 7168 lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl); 7169 lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type); 7170 lpfc_ack0_init(phba, lpfc_ack0); 7171 lpfc_xri_rebalancing_init(phba, lpfc_xri_rebalancing); 7172 lpfc_topology_init(phba, lpfc_topology); 7173 lpfc_link_speed_init(phba, lpfc_link_speed); 7174 lpfc_poll_tmo_init(phba, lpfc_poll_tmo); 7175 lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo); 7176 lpfc_enable_npiv_init(phba, lpfc_enable_npiv); 7177 lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy); 7178 lpfc_enable_rrq_init(phba, lpfc_enable_rrq); 7179 lpfc_fcp_wait_abts_rsp_init(phba, lpfc_fcp_wait_abts_rsp); 7180 lpfc_fdmi_on_init(phba, lpfc_fdmi_on); 7181 lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN); 7182 lpfc_use_msi_init(phba, lpfc_use_msi); 7183 lpfc_nvme_oas_init(phba, lpfc_nvme_oas); 7184 lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd); 7185 lpfc_fcp_imax_init(phba, lpfc_fcp_imax); 7186 lpfc_force_rscn_init(phba, lpfc_force_rscn); 7187 lpfc_cq_poll_threshold_init(phba, lpfc_cq_poll_threshold); 7188 lpfc_cq_max_proc_limit_init(phba, lpfc_cq_max_proc_limit); 7189 lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); 7190 lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); 7191 lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); 7192 7193 lpfc_EnableXLane_init(phba, lpfc_EnableXLane); 7194 /* VMID Inits */ 7195 lpfc_max_vmid_init(phba, lpfc_max_vmid); 7196 lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout); 7197 lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header); 7198 lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging); 7199 if (phba->sli_rev != LPFC_SLI_REV4) 7200 phba->cfg_EnableXLane = 0; 7201 lpfc_XLanePriority_init(phba, lpfc_XLanePriority); 7202 7203 memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t))); 7204 memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t))); 7205 phba->cfg_oas_lun_state = 0; 7206 phba->cfg_oas_lun_status = 0; 7207 phba->cfg_oas_flags = 0; 7208 phba->cfg_oas_priority = 0; 7209 lpfc_enable_bg_init(phba, lpfc_enable_bg); 7210 lpfc_prot_mask_init(phba, lpfc_prot_mask); 7211 lpfc_prot_guard_init(phba, lpfc_prot_guard); 7212 if (phba->sli_rev == LPFC_SLI_REV4) 7213 phba->cfg_poll = 0; 7214 else 7215 phba->cfg_poll = lpfc_poll; 7216 7217 /* Get the function mode */ 7218 lpfc_get_hba_function_mode(phba); 7219 7220 /* BlockGuard allowed for FC only. */ 7221 if (phba->cfg_enable_bg && phba->hba_flag & HBA_FCOE_MODE) { 7222 lpfc_printf_log(phba, KERN_INFO, LOG_INIT, 7223 "0581 BlockGuard feature not supported\n"); 7224 /* If set, clear the BlockGuard support param */ 7225 phba->cfg_enable_bg = 0; 7226 } else if (phba->cfg_enable_bg) { 7227 phba->sli3_options |= LPFC_SLI3_BG_ENABLED; 7228 } 7229 7230 lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp); 7231 7232 lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type); 7233 lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq); 7234 lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post); 7235 7236 /* Initialize first burst. Target vs Initiator are different. */ 7237 lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb); 7238 lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size); 7239 lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold); 7240 lpfc_hdw_queue_init(phba, lpfc_hdw_queue); 7241 lpfc_irq_chann_init(phba, lpfc_irq_chann); 7242 lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr); 7243 lpfc_enable_dpp_init(phba, lpfc_enable_dpp); 7244 lpfc_enable_mi_init(phba, lpfc_enable_mi); 7245 7246 phba->cgn_p.cgn_param_mode = LPFC_CFG_OFF; 7247 phba->cmf_active_mode = LPFC_CFG_OFF; 7248 if (lpfc_fabric_cgn_frequency > EDC_CG_SIGFREQ_CNT_MAX || 7249 lpfc_fabric_cgn_frequency < EDC_CG_SIGFREQ_CNT_MIN) 7250 lpfc_fabric_cgn_frequency = 100; /* 100 ms default */ 7251 7252 if (phba->sli_rev != LPFC_SLI_REV4) { 7253 /* NVME only supported on SLI4 */ 7254 phba->nvmet_support = 0; 7255 phba->cfg_nvmet_mrq = 0; 7256 phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP; 7257 phba->cfg_enable_bbcr = 0; 7258 phba->cfg_xri_rebalancing = 0; 7259 } else { 7260 /* We MUST have FCP support */ 7261 if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) 7262 phba->cfg_enable_fc4_type |= LPFC_ENABLE_FCP; 7263 } 7264 7265 phba->cfg_auto_imax = (phba->cfg_fcp_imax) ? 0 : 1; 7266 7267 phba->cfg_enable_pbde = 0; 7268 7269 /* A value of 0 means use the number of CPUs found in the system */ 7270 if (phba->cfg_hdw_queue == 0) 7271 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu; 7272 if (phba->cfg_irq_chann == 0) 7273 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu; 7274 if (phba->cfg_irq_chann > phba->cfg_hdw_queue && 7275 phba->sli_rev == LPFC_SLI_REV4) 7276 phba->cfg_irq_chann = phba->cfg_hdw_queue; 7277 7278 lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); 7279 lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); 7280 lpfc_aer_support_init(phba, lpfc_aer_support); 7281 lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); 7282 lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade); 7283 lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); 7284 lpfc_delay_discovery_init(phba, lpfc_delay_discovery); 7285 lpfc_sli_mode_init(phba, lpfc_sli_mode); 7286 lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags); 7287 lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize); 7288 lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level); 7289 lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func); 7290 7291 return; 7292 } 7293 7294 /** 7295 * lpfc_nvme_mod_param_dep - Adjust module parameter value based on 7296 * dependencies between protocols and roles. 7297 * @phba: lpfc_hba pointer. 7298 **/ 7299 void 7300 lpfc_nvme_mod_param_dep(struct lpfc_hba *phba) 7301 { 7302 int logit = 0; 7303 7304 if (phba->cfg_hdw_queue > phba->sli4_hba.num_present_cpu) { 7305 phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu; 7306 logit = 1; 7307 } 7308 if (phba->cfg_irq_chann > phba->sli4_hba.num_present_cpu) { 7309 phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu; 7310 logit = 1; 7311 } 7312 if (phba->cfg_irq_chann > phba->cfg_hdw_queue) { 7313 phba->cfg_irq_chann = phba->cfg_hdw_queue; 7314 logit = 1; 7315 } 7316 if (logit) 7317 lpfc_printf_log(phba, KERN_ERR, LOG_SLI, 7318 "2006 Reducing Queues - CPU limitation: " 7319 "IRQ %d HDWQ %d\n", 7320 phba->cfg_irq_chann, 7321 phba->cfg_hdw_queue); 7322 7323 if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME && 7324 phba->nvmet_support) { 7325 phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_FCP; 7326 7327 lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC, 7328 "6013 %s x%x fb_size x%x, fb_max x%x\n", 7329 "NVME Target PRLI ACC enable_fb ", 7330 phba->cfg_nvme_enable_fb, 7331 phba->cfg_nvmet_fb_size, 7332 LPFC_NVMET_FB_SZ_MAX); 7333 7334 if (phba->cfg_nvme_enable_fb == 0) 7335 phba->cfg_nvmet_fb_size = 0; 7336 else { 7337 if (phba->cfg_nvmet_fb_size > LPFC_NVMET_FB_SZ_MAX) 7338 phba->cfg_nvmet_fb_size = LPFC_NVMET_FB_SZ_MAX; 7339 } 7340 7341 if (!phba->cfg_nvmet_mrq) 7342 phba->cfg_nvmet_mrq = phba->cfg_hdw_queue; 7343 7344 /* Adjust lpfc_nvmet_mrq to avoid running out of WQE slots */ 7345 if (phba->cfg_nvmet_mrq > phba->cfg_hdw_queue) { 7346 phba->cfg_nvmet_mrq = phba->cfg_hdw_queue; 7347 lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC, 7348 "6018 Adjust lpfc_nvmet_mrq to %d\n", 7349 phba->cfg_nvmet_mrq); 7350 } 7351 if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX) 7352 phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX; 7353 7354 } else { 7355 /* Not NVME Target mode. Turn off Target parameters. */ 7356 phba->nvmet_support = 0; 7357 phba->cfg_nvmet_mrq = 0; 7358 phba->cfg_nvmet_fb_size = 0; 7359 } 7360 } 7361 7362 /** 7363 * lpfc_get_vport_cfgparam - Used during port create, init the vport structure 7364 * @vport: lpfc_vport pointer. 7365 **/ 7366 void 7367 lpfc_get_vport_cfgparam(struct lpfc_vport *vport) 7368 { 7369 lpfc_log_verbose_init(vport, lpfc_log_verbose); 7370 lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth); 7371 lpfc_tgt_queue_depth_init(vport, lpfc_tgt_queue_depth); 7372 lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo); 7373 lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo); 7374 lpfc_peer_port_login_init(vport, lpfc_peer_port_login); 7375 lpfc_restrict_login_init(vport, lpfc_restrict_login); 7376 lpfc_fcp_class_init(vport, lpfc_fcp_class); 7377 lpfc_use_adisc_init(vport, lpfc_use_adisc); 7378 lpfc_first_burst_size_init(vport, lpfc_first_burst_size); 7379 lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time); 7380 lpfc_discovery_threads_init(vport, lpfc_discovery_threads); 7381 lpfc_max_luns_init(vport, lpfc_max_luns); 7382 lpfc_scan_down_init(vport, lpfc_scan_down); 7383 lpfc_enable_da_id_init(vport, lpfc_enable_da_id); 7384 return; 7385 } 7386