1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2004-2015 Emulex. All rights reserved. * 5 * EMULEX and SLI are trademarks of Emulex. * 6 * www.emulex.com * 7 * Portions Copyright (C) 2004-2005 Christoph Hellwig * 8 * * 9 * This program is free software; you can redistribute it and/or * 10 * modify it under the terms of version 2 of the GNU General * 11 * Public License as published by the Free Software Foundation. * 12 * This program is distributed in the hope that it will be useful. * 13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 17 * TO BE LEGALLY INVALID. See the GNU General Public License for * 18 * more details, a copy of which can be found in the file COPYING * 19 * included with this package. * 20 *******************************************************************/ 21 22 #include <scsi/scsi_host.h> 23 24 #if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS) 25 #define CONFIG_SCSI_LPFC_DEBUG_FS 26 #endif 27 28 struct lpfc_sli2_slim; 29 30 #define ELX_MODEL_NAME_SIZE 80 31 32 #define LPFC_PCI_DEV_LP 0x1 33 #define LPFC_PCI_DEV_OC 0x2 34 35 #define LPFC_SLI_REV2 2 36 #define LPFC_SLI_REV3 3 37 #define LPFC_SLI_REV4 4 38 39 #define LPFC_MAX_TARGET 4096 /* max number of targets supported */ 40 #define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els 41 requests */ 42 #define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact 43 the NameServer before giving up. */ 44 #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */ 45 #define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ 46 #define LPFC_DEFAULT_MENLO_SG_SEG_CNT 128 /* sg element count per scsi 47 cmnd for menlo needs nearly twice as for firmware 48 downloads using bsg */ 49 50 #define LPFC_MIN_SG_SLI4_BUF_SZ 0x800 /* based on LPFC_DEFAULT_SG_SEG_CNT */ 51 #define LPFC_MAX_SG_SLI4_SEG_CNT_DIF 128 /* sg element count per scsi cmnd */ 52 #define LPFC_MAX_SG_SEG_CNT_DIF 512 /* sg element count per scsi cmnd */ 53 #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */ 54 #define LPFC_MAX_SGL_SEG_CNT 512 /* SGL element count per scsi cmnd */ 55 #define LPFC_MAX_BPL_SEG_CNT 4096 /* BPL element count per scsi cmnd */ 56 57 #define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */ 58 #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ 59 #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ 60 #define LPFC_VNAME_LEN 100 /* vport symbolic name length */ 61 #define LPFC_TGTQ_INTERVAL 40000 /* Min amount of time between tgt 62 queue depth change in millisecs */ 63 #define LPFC_TGTQ_RAMPUP_PCENT 5 /* Target queue rampup in percentage */ 64 #define LPFC_MIN_TGT_QDEPTH 10 65 #define LPFC_MAX_TGT_QDEPTH 0xFFFF 66 67 #define LPFC_MAX_BUCKET_COUNT 20 /* Maximum no. of buckets for stat data 68 collection. */ 69 /* 70 * Following time intervals are used of adjusting SCSI device 71 * queue depths when there are driver resource error or Firmware 72 * resource error. 73 */ 74 /* 1 Second */ 75 #define QUEUE_RAMP_DOWN_INTERVAL (msecs_to_jiffies(1000 * 1)) 76 77 /* Number of exchanges reserved for discovery to complete */ 78 #define LPFC_DISC_IOCB_BUFF_COUNT 20 79 80 #define LPFC_HB_MBOX_INTERVAL 5 /* Heart beat interval in seconds. */ 81 #define LPFC_HB_MBOX_TIMEOUT 30 /* Heart beat timeout in seconds. */ 82 83 #define LPFC_LOOK_AHEAD_OFF 0 /* Look ahead logic is turned off */ 84 85 /* Error Attention event polling interval */ 86 #define LPFC_ERATT_POLL_INTERVAL 5 /* EATT poll interval in seconds */ 87 88 /* Define macros for 64 bit support */ 89 #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr))) 90 #define putPaddrHigh(addr) ((uint32_t) (0xffffffff & (((u64)(addr))>>32))) 91 #define getPaddr(high, low) ((dma_addr_t)( \ 92 (( (u64)(high)<<16 ) << 16)|( (u64)(low)))) 93 /* Provide maximum configuration definitions. */ 94 #define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */ 95 #define FC_MAX_ADPTMSG 64 96 97 #define MAX_HBAEVT 32 98 99 /* Number of MSI-X vectors the driver uses */ 100 #define LPFC_MSIX_VECTORS 2 101 102 /* lpfc wait event data ready flag */ 103 #define LPFC_DATA_READY (1<<0) 104 105 /* queue dump line buffer size */ 106 #define LPFC_LBUF_SZ 128 107 108 /* mailbox system shutdown options */ 109 #define LPFC_MBX_NO_WAIT 0 110 #define LPFC_MBX_WAIT 1 111 112 enum lpfc_polling_flags { 113 ENABLE_FCP_RING_POLLING = 0x1, 114 DISABLE_FCP_RING_INT = 0x2 115 }; 116 117 /* Provide DMA memory definitions the driver uses per port instance. */ 118 struct lpfc_dmabuf { 119 struct list_head list; 120 void *virt; /* virtual address ptr */ 121 dma_addr_t phys; /* mapped address */ 122 uint32_t buffer_tag; /* used for tagged queue ring */ 123 }; 124 125 struct lpfc_dma_pool { 126 struct lpfc_dmabuf *elements; 127 uint32_t max_count; 128 uint32_t current_count; 129 }; 130 131 struct hbq_dmabuf { 132 struct lpfc_dmabuf hbuf; 133 struct lpfc_dmabuf dbuf; 134 uint32_t size; 135 uint32_t tag; 136 struct lpfc_cq_event cq_event; 137 unsigned long time_stamp; 138 }; 139 140 /* Priority bit. Set value to exceed low water mark in lpfc_mem. */ 141 #define MEM_PRI 0x100 142 143 144 /****************************************************************************/ 145 /* Device VPD save area */ 146 /****************************************************************************/ 147 typedef struct lpfc_vpd { 148 uint32_t status; /* vpd status value */ 149 uint32_t length; /* number of bytes actually returned */ 150 struct { 151 uint32_t rsvd1; /* Revision numbers */ 152 uint32_t biuRev; 153 uint32_t smRev; 154 uint32_t smFwRev; 155 uint32_t endecRev; 156 uint16_t rBit; 157 uint8_t fcphHigh; 158 uint8_t fcphLow; 159 uint8_t feaLevelHigh; 160 uint8_t feaLevelLow; 161 uint32_t postKernRev; 162 uint32_t opFwRev; 163 uint8_t opFwName[16]; 164 uint32_t sli1FwRev; 165 uint8_t sli1FwName[16]; 166 uint32_t sli2FwRev; 167 uint8_t sli2FwName[16]; 168 } rev; 169 struct { 170 #ifdef __BIG_ENDIAN_BITFIELD 171 uint32_t rsvd3 :19; /* Reserved */ 172 uint32_t cdss : 1; /* Configure Data Security SLI */ 173 uint32_t rsvd2 : 3; /* Reserved */ 174 uint32_t cbg : 1; /* Configure BlockGuard */ 175 uint32_t cmv : 1; /* Configure Max VPIs */ 176 uint32_t ccrp : 1; /* Config Command Ring Polling */ 177 uint32_t csah : 1; /* Configure Synchronous Abort Handling */ 178 uint32_t chbs : 1; /* Cofigure Host Backing store */ 179 uint32_t cinb : 1; /* Enable Interrupt Notification Block */ 180 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */ 181 uint32_t cmx : 1; /* Configure Max XRIs */ 182 uint32_t cmr : 1; /* Configure Max RPIs */ 183 #else /* __LITTLE_ENDIAN */ 184 uint32_t cmr : 1; /* Configure Max RPIs */ 185 uint32_t cmx : 1; /* Configure Max XRIs */ 186 uint32_t cerbm : 1; /* Configure Enhanced Receive Buf Mgmt */ 187 uint32_t cinb : 1; /* Enable Interrupt Notification Block */ 188 uint32_t chbs : 1; /* Cofigure Host Backing store */ 189 uint32_t csah : 1; /* Configure Synchronous Abort Handling */ 190 uint32_t ccrp : 1; /* Config Command Ring Polling */ 191 uint32_t cmv : 1; /* Configure Max VPIs */ 192 uint32_t cbg : 1; /* Configure BlockGuard */ 193 uint32_t rsvd2 : 3; /* Reserved */ 194 uint32_t cdss : 1; /* Configure Data Security SLI */ 195 uint32_t rsvd3 :19; /* Reserved */ 196 #endif 197 } sli3Feat; 198 } lpfc_vpd_t; 199 200 struct lpfc_scsi_buf; 201 202 203 /* 204 * lpfc stat counters 205 */ 206 struct lpfc_stats { 207 /* Statistics for ELS commands */ 208 uint32_t elsLogiCol; 209 uint32_t elsRetryExceeded; 210 uint32_t elsXmitRetry; 211 uint32_t elsDelayRetry; 212 uint32_t elsRcvDrop; 213 uint32_t elsRcvFrame; 214 uint32_t elsRcvRSCN; 215 uint32_t elsRcvRNID; 216 uint32_t elsRcvFARP; 217 uint32_t elsRcvFARPR; 218 uint32_t elsRcvFLOGI; 219 uint32_t elsRcvPLOGI; 220 uint32_t elsRcvADISC; 221 uint32_t elsRcvPDISC; 222 uint32_t elsRcvFAN; 223 uint32_t elsRcvLOGO; 224 uint32_t elsRcvPRLO; 225 uint32_t elsRcvPRLI; 226 uint32_t elsRcvLIRR; 227 uint32_t elsRcvRLS; 228 uint32_t elsRcvRPS; 229 uint32_t elsRcvRPL; 230 uint32_t elsRcvRRQ; 231 uint32_t elsRcvRTV; 232 uint32_t elsRcvECHO; 233 uint32_t elsRcvLCB; 234 uint32_t elsRcvRDP; 235 uint32_t elsXmitFLOGI; 236 uint32_t elsXmitFDISC; 237 uint32_t elsXmitPLOGI; 238 uint32_t elsXmitPRLI; 239 uint32_t elsXmitADISC; 240 uint32_t elsXmitLOGO; 241 uint32_t elsXmitSCR; 242 uint32_t elsXmitRNID; 243 uint32_t elsXmitFARP; 244 uint32_t elsXmitFARPR; 245 uint32_t elsXmitACC; 246 uint32_t elsXmitLSRJT; 247 248 uint32_t frameRcvBcast; 249 uint32_t frameRcvMulti; 250 uint32_t strayXmitCmpl; 251 uint32_t frameXmitDelay; 252 uint32_t xriCmdCmpl; 253 uint32_t xriStatErr; 254 uint32_t LinkUp; 255 uint32_t LinkDown; 256 uint32_t LinkMultiEvent; 257 uint32_t NoRcvBuf; 258 uint32_t fcpCmd; 259 uint32_t fcpCmpl; 260 uint32_t fcpRspErr; 261 uint32_t fcpRemoteStop; 262 uint32_t fcpPortRjt; 263 uint32_t fcpPortBusy; 264 uint32_t fcpError; 265 uint32_t fcpLocalErr; 266 }; 267 268 struct lpfc_hba; 269 270 271 enum discovery_state { 272 LPFC_VPORT_UNKNOWN = 0, /* vport state is unknown */ 273 LPFC_VPORT_FAILED = 1, /* vport has failed */ 274 LPFC_LOCAL_CFG_LINK = 6, /* local NPORT Id configured */ 275 LPFC_FLOGI = 7, /* FLOGI sent to Fabric */ 276 LPFC_FDISC = 8, /* FDISC sent for vport */ 277 LPFC_FABRIC_CFG_LINK = 9, /* Fabric assigned NPORT Id 278 * configured */ 279 LPFC_NS_REG = 10, /* Register with NameServer */ 280 LPFC_NS_QRY = 11, /* Query NameServer for NPort ID list */ 281 LPFC_BUILD_DISC_LIST = 12, /* Build ADISC and PLOGI lists for 282 * device authentication / discovery */ 283 LPFC_DISC_AUTH = 13, /* Processing ADISC list */ 284 LPFC_VPORT_READY = 32, 285 }; 286 287 enum hba_state { 288 LPFC_LINK_UNKNOWN = 0, /* HBA state is unknown */ 289 LPFC_WARM_START = 1, /* HBA state after selective reset */ 290 LPFC_INIT_START = 2, /* Initial state after board reset */ 291 LPFC_INIT_MBX_CMDS = 3, /* Initialize HBA with mbox commands */ 292 LPFC_LINK_DOWN = 4, /* HBA initialized, link is down */ 293 LPFC_LINK_UP = 5, /* Link is up - issue READ_LA */ 294 LPFC_CLEAR_LA = 6, /* authentication cmplt - issue 295 * CLEAR_LA */ 296 LPFC_HBA_READY = 32, 297 LPFC_HBA_ERROR = -1 298 }; 299 300 struct lpfc_vport { 301 struct lpfc_hba *phba; 302 struct list_head listentry; 303 uint8_t port_type; 304 #define LPFC_PHYSICAL_PORT 1 305 #define LPFC_NPIV_PORT 2 306 #define LPFC_FABRIC_PORT 3 307 enum discovery_state port_state; 308 309 uint16_t vpi; 310 uint16_t vfi; 311 uint8_t vpi_state; 312 #define LPFC_VPI_REGISTERED 0x1 313 314 uint32_t fc_flag; /* FC flags */ 315 /* Several of these flags are HBA centric and should be moved to 316 * phba->link_flag (e.g. FC_PTP, FC_PUBLIC_LOOP) 317 */ 318 #define FC_PT2PT 0x1 /* pt2pt with no fabric */ 319 #define FC_PT2PT_PLOGI 0x2 /* pt2pt initiate PLOGI */ 320 #define FC_DISC_TMO 0x4 /* Discovery timer running */ 321 #define FC_PUBLIC_LOOP 0x8 /* Public loop */ 322 #define FC_LBIT 0x10 /* LOGIN bit in loopinit set */ 323 #define FC_RSCN_MODE 0x20 /* RSCN cmd rcv'ed */ 324 #define FC_NLP_MORE 0x40 /* More node to process in node tbl */ 325 #define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */ 326 #define FC_FABRIC 0x100 /* We are fabric attached */ 327 #define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */ 328 #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */ 329 #define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/ 330 #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */ 331 #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ 332 #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ 333 #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */ 334 #define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */ 335 #define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */ 336 #define FC_VPORT_NEEDS_INIT_VPI 0x200000 /* Need to INIT_VPI before FDISC */ 337 #define FC_VPORT_CVL_RCVD 0x400000 /* VLink failed due to CVL */ 338 #define FC_VFI_REGISTERED 0x800000 /* VFI is registered */ 339 #define FC_FDISC_COMPLETED 0x1000000/* FDISC completed */ 340 #define FC_DISC_DELAYED 0x2000000/* Delay NPort discovery */ 341 342 uint32_t ct_flags; 343 #define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */ 344 #define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */ 345 #define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */ 346 #define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */ 347 #define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */ 348 349 struct list_head fc_nodes; 350 351 /* Keep counters for the number of entries in each list. */ 352 uint16_t fc_plogi_cnt; 353 uint16_t fc_adisc_cnt; 354 uint16_t fc_reglogin_cnt; 355 uint16_t fc_prli_cnt; 356 uint16_t fc_unmap_cnt; 357 uint16_t fc_map_cnt; 358 uint16_t fc_npr_cnt; 359 uint16_t fc_unused_cnt; 360 struct serv_parm fc_sparam; /* buffer for our service parameters */ 361 362 uint32_t fc_myDID; /* fibre channel S_ID */ 363 uint32_t fc_prevDID; /* previous fibre channel S_ID */ 364 struct lpfc_name fabric_portname; 365 struct lpfc_name fabric_nodename; 366 367 int32_t stopped; /* HBA has not been restarted since last ERATT */ 368 uint8_t fc_linkspeed; /* Link speed after last READ_LA */ 369 370 uint32_t num_disc_nodes; /*in addition to hba_state */ 371 372 uint32_t fc_nlp_cnt; /* outstanding NODELIST requests */ 373 uint32_t fc_rscn_id_cnt; /* count of RSCNs payloads in list */ 374 uint32_t fc_rscn_flush; /* flag use of fc_rscn_id_list */ 375 struct lpfc_dmabuf *fc_rscn_id_list[FC_MAX_HOLD_RSCN]; 376 struct lpfc_name fc_nodename; /* fc nodename */ 377 struct lpfc_name fc_portname; /* fc portname */ 378 379 struct lpfc_work_evt disc_timeout_evt; 380 381 struct timer_list fc_disctmo; /* Discovery rescue timer */ 382 uint8_t fc_ns_retry; /* retries for fabric nameserver */ 383 uint32_t fc_prli_sent; /* cntr for outstanding PRLIs */ 384 385 spinlock_t work_port_lock; 386 uint32_t work_port_events; /* Timeout to be handled */ 387 #define WORKER_DISC_TMO 0x1 /* vport: Discovery timeout */ 388 #define WORKER_ELS_TMO 0x2 /* vport: ELS timeout */ 389 #define WORKER_FDMI_TMO 0x4 /* vport: FDMI timeout */ 390 #define WORKER_DELAYED_DISC_TMO 0x8 /* vport: delayed discovery */ 391 392 #define WORKER_MBOX_TMO 0x100 /* hba: MBOX timeout */ 393 #define WORKER_HB_TMO 0x200 /* hba: Heart beat timeout */ 394 #define WORKER_FABRIC_BLOCK_TMO 0x400 /* hba: fabric block timeout */ 395 #define WORKER_RAMP_DOWN_QUEUE 0x800 /* hba: Decrease Q depth */ 396 #define WORKER_RAMP_UP_QUEUE 0x1000 /* hba: Increase Q depth */ 397 #define WORKER_SERVICE_TXQ 0x2000 /* hba: IOCBs on the txq */ 398 399 struct timer_list fc_fdmitmo; 400 struct timer_list els_tmofunc; 401 struct timer_list delayed_disc_tmo; 402 403 int unreg_vpi_cmpl; 404 405 uint8_t load_flag; 406 #define FC_LOADING 0x1 /* HBA in process of loading drvr */ 407 #define FC_UNLOADING 0x2 /* HBA in process of unloading drvr */ 408 /* Vport Config Parameters */ 409 uint32_t cfg_scan_down; 410 uint32_t cfg_lun_queue_depth; 411 uint32_t cfg_nodev_tmo; 412 uint32_t cfg_devloss_tmo; 413 uint32_t cfg_restrict_login; 414 uint32_t cfg_peer_port_login; 415 uint32_t cfg_fcp_class; 416 uint32_t cfg_use_adisc; 417 uint32_t cfg_fdmi_on; 418 #define LPFC_FDMI_SUPPORT 1 /* bit 0 - FDMI supported? */ 419 #define LPFC_FDMI_REG_DELAY 2 /* bit 1 - 60 sec registration delay */ 420 #define LPFC_FDMI_ALL_ATTRIB 4 /* bit 2 - register ALL attributes? */ 421 uint32_t cfg_discovery_threads; 422 uint32_t cfg_log_verbose; 423 uint32_t cfg_max_luns; 424 uint32_t cfg_enable_da_id; 425 uint32_t cfg_max_scsicmpl_time; 426 uint32_t cfg_tgt_queue_depth; 427 uint32_t cfg_first_burst_size; 428 429 uint32_t dev_loss_tmo_changed; 430 431 struct fc_vport *fc_vport; 432 433 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS 434 struct dentry *debug_disc_trc; 435 struct dentry *debug_nodelist; 436 struct dentry *vport_debugfs_root; 437 struct lpfc_debugfs_trc *disc_trc; 438 atomic_t disc_trc_cnt; 439 #endif 440 uint8_t stat_data_enabled; 441 uint8_t stat_data_blocked; 442 struct list_head rcv_buffer_list; 443 unsigned long rcv_buffer_time_stamp; 444 uint32_t vport_flag; 445 #define STATIC_VPORT 1 446 }; 447 448 struct hbq_s { 449 uint16_t entry_count; /* Current number of HBQ slots */ 450 uint16_t buffer_count; /* Current number of buffers posted */ 451 uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */ 452 uint32_t hbqPutIdx; /* HBQ slot to use */ 453 uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */ 454 void *hbq_virt; /* Virtual ptr to this hbq */ 455 struct list_head hbq_buffer_list; /* buffers assigned to this HBQ */ 456 /* Callback for HBQ buffer allocation */ 457 struct hbq_dmabuf *(*hbq_alloc_buffer) (struct lpfc_hba *); 458 /* Callback for HBQ buffer free */ 459 void (*hbq_free_buffer) (struct lpfc_hba *, 460 struct hbq_dmabuf *); 461 }; 462 463 #define LPFC_MAX_HBQS 4 464 /* this matches the position in the lpfc_hbq_defs array */ 465 #define LPFC_ELS_HBQ 0 466 #define LPFC_EXTRA_HBQ 1 467 468 enum hba_temp_state { 469 HBA_NORMAL_TEMP, 470 HBA_OVER_TEMP 471 }; 472 473 enum intr_type_t { 474 NONE = 0, 475 INTx, 476 MSI, 477 MSIX, 478 }; 479 480 #define LPFC_CT_CTX_MAX 64 481 struct unsol_rcv_ct_ctx { 482 uint32_t ctxt_id; 483 uint32_t SID; 484 uint32_t valid; 485 #define UNSOL_INVALID 0 486 #define UNSOL_VALID 1 487 uint16_t oxid; 488 uint16_t rxid; 489 }; 490 491 #define LPFC_USER_LINK_SPEED_AUTO 0 /* auto select (default)*/ 492 #define LPFC_USER_LINK_SPEED_1G 1 /* 1 Gigabaud */ 493 #define LPFC_USER_LINK_SPEED_2G 2 /* 2 Gigabaud */ 494 #define LPFC_USER_LINK_SPEED_4G 4 /* 4 Gigabaud */ 495 #define LPFC_USER_LINK_SPEED_8G 8 /* 8 Gigabaud */ 496 #define LPFC_USER_LINK_SPEED_10G 10 /* 10 Gigabaud */ 497 #define LPFC_USER_LINK_SPEED_16G 16 /* 16 Gigabaud */ 498 #define LPFC_USER_LINK_SPEED_32G 32 /* 32 Gigabaud */ 499 #define LPFC_USER_LINK_SPEED_MAX LPFC_USER_LINK_SPEED_32G 500 #define LPFC_USER_LINK_SPEED_BITMAP ((1ULL << LPFC_USER_LINK_SPEED_32G) | \ 501 (1 << LPFC_USER_LINK_SPEED_16G) | \ 502 (1 << LPFC_USER_LINK_SPEED_10G) | \ 503 (1 << LPFC_USER_LINK_SPEED_8G) | \ 504 (1 << LPFC_USER_LINK_SPEED_4G) | \ 505 (1 << LPFC_USER_LINK_SPEED_2G) | \ 506 (1 << LPFC_USER_LINK_SPEED_1G) | \ 507 (1 << LPFC_USER_LINK_SPEED_AUTO)) 508 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16, 32" 509 510 enum nemb_type { 511 nemb_mse = 1, 512 nemb_hbd 513 }; 514 515 enum mbox_type { 516 mbox_rd = 1, 517 mbox_wr 518 }; 519 520 enum dma_type { 521 dma_mbox = 1, 522 dma_ebuf 523 }; 524 525 enum sta_type { 526 sta_pre_addr = 1, 527 sta_pos_addr 528 }; 529 530 struct lpfc_mbox_ext_buf_ctx { 531 uint32_t state; 532 #define LPFC_BSG_MBOX_IDLE 0 533 #define LPFC_BSG_MBOX_HOST 1 534 #define LPFC_BSG_MBOX_PORT 2 535 #define LPFC_BSG_MBOX_DONE 3 536 #define LPFC_BSG_MBOX_ABTS 4 537 enum nemb_type nembType; 538 enum mbox_type mboxType; 539 uint32_t numBuf; 540 uint32_t mbxTag; 541 uint32_t seqNum; 542 struct lpfc_dmabuf *mbx_dmabuf; 543 struct list_head ext_dmabuf_list; 544 }; 545 546 struct lpfc_hba { 547 /* SCSI interface function jump table entries */ 548 int (*lpfc_new_scsi_buf) 549 (struct lpfc_vport *, int); 550 struct lpfc_scsi_buf * (*lpfc_get_scsi_buf) 551 (struct lpfc_hba *, struct lpfc_nodelist *); 552 int (*lpfc_scsi_prep_dma_buf) 553 (struct lpfc_hba *, struct lpfc_scsi_buf *); 554 void (*lpfc_scsi_unprep_dma_buf) 555 (struct lpfc_hba *, struct lpfc_scsi_buf *); 556 void (*lpfc_release_scsi_buf) 557 (struct lpfc_hba *, struct lpfc_scsi_buf *); 558 void (*lpfc_rampdown_queue_depth) 559 (struct lpfc_hba *); 560 void (*lpfc_scsi_prep_cmnd) 561 (struct lpfc_vport *, struct lpfc_scsi_buf *, 562 struct lpfc_nodelist *); 563 564 /* IOCB interface function jump table entries */ 565 int (*__lpfc_sli_issue_iocb) 566 (struct lpfc_hba *, uint32_t, 567 struct lpfc_iocbq *, uint32_t); 568 void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *, 569 struct lpfc_iocbq *); 570 int (*lpfc_hba_down_post)(struct lpfc_hba *phba); 571 IOCB_t * (*lpfc_get_iocb_from_iocbq) 572 (struct lpfc_iocbq *); 573 void (*lpfc_scsi_cmd_iocb_cmpl) 574 (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *); 575 576 /* MBOX interface function jump table entries */ 577 int (*lpfc_sli_issue_mbox) 578 (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); 579 580 /* Slow-path IOCB process function jump table entries */ 581 void (*lpfc_sli_handle_slow_ring_event) 582 (struct lpfc_hba *phba, struct lpfc_sli_ring *pring, 583 uint32_t mask); 584 585 /* INIT device interface function jump table entries */ 586 int (*lpfc_sli_hbq_to_firmware) 587 (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *); 588 int (*lpfc_sli_brdrestart) 589 (struct lpfc_hba *); 590 int (*lpfc_sli_brdready) 591 (struct lpfc_hba *, uint32_t); 592 void (*lpfc_handle_eratt) 593 (struct lpfc_hba *); 594 void (*lpfc_stop_port) 595 (struct lpfc_hba *); 596 int (*lpfc_hba_init_link) 597 (struct lpfc_hba *, uint32_t); 598 int (*lpfc_hba_down_link) 599 (struct lpfc_hba *, uint32_t); 600 int (*lpfc_selective_reset) 601 (struct lpfc_hba *); 602 603 int (*lpfc_bg_scsi_prep_dma_buf) 604 (struct lpfc_hba *, struct lpfc_scsi_buf *); 605 /* Add new entries here */ 606 607 /* SLI4 specific HBA data structure */ 608 struct lpfc_sli4_hba sli4_hba; 609 610 struct lpfc_sli sli; 611 uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */ 612 uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */ 613 uint32_t sli3_options; /* Mask of enabled SLI3 options */ 614 #define LPFC_SLI3_HBQ_ENABLED 0x01 615 #define LPFC_SLI3_NPIV_ENABLED 0x02 616 #define LPFC_SLI3_VPORT_TEARDOWN 0x04 617 #define LPFC_SLI3_CRP_ENABLED 0x08 618 #define LPFC_SLI3_BG_ENABLED 0x20 619 #define LPFC_SLI3_DSS_ENABLED 0x40 620 #define LPFC_SLI4_PERFH_ENABLED 0x80 621 #define LPFC_SLI4_PHWQ_ENABLED 0x100 622 uint32_t iocb_cmd_size; 623 uint32_t iocb_rsp_size; 624 625 enum hba_state link_state; 626 uint32_t link_flag; /* link state flags */ 627 #define LS_LOOPBACK_MODE 0x1 /* NPort is in Loopback mode */ 628 /* This flag is set while issuing */ 629 /* INIT_LINK mailbox command */ 630 #define LS_NPIV_FAB_SUPPORTED 0x2 /* Fabric supports NPIV */ 631 #define LS_IGNORE_ERATT 0x4 /* intr handler should ignore ERATT */ 632 633 uint32_t hba_flag; /* hba generic flags */ 634 #define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */ 635 #define DEFER_ERATT 0x2 /* Deferred error attention in progress */ 636 #define HBA_FCOE_MODE 0x4 /* HBA function in FCoE Mode */ 637 #define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/ 638 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */ 639 #define FCP_XRI_ABORT_EVENT 0x20 640 #define ELS_XRI_ABORT_EVENT 0x40 641 #define ASYNC_EVENT 0x80 642 #define LINK_DISABLED 0x100 /* Link disabled by user */ 643 #define FCF_TS_INPROG 0x200 /* FCF table scan in progress */ 644 #define FCF_RR_INPROG 0x400 /* FCF roundrobin flogi in progress */ 645 #define HBA_FIP_SUPPORT 0x800 /* FIP support in HBA */ 646 #define HBA_AER_ENABLED 0x1000 /* AER enabled with HBA */ 647 #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */ 648 #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */ 649 #define HBA_FCP_IOQ_FLUSH 0x8000 /* FCP I/O queues being flushed */ 650 #define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */ 651 uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/ 652 struct lpfc_dmabuf slim2p; 653 654 MAILBOX_t *mbox; 655 uint32_t *mbox_ext; 656 struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx; 657 uint32_t ha_copy; 658 struct _PCB *pcb; 659 struct _IOCB *IOCBs; 660 661 struct lpfc_dmabuf hbqslimp; 662 663 uint16_t pci_cfg_value; 664 665 uint8_t fc_linkspeed; /* Link speed after last READ_LA */ 666 667 uint32_t fc_eventTag; /* event tag for link attention */ 668 uint32_t link_events; 669 670 /* These fields used to be binfo */ 671 uint32_t fc_pref_DID; /* preferred D_ID */ 672 uint8_t fc_pref_ALPA; /* preferred AL_PA */ 673 uint32_t fc_edtovResol; /* E_D_TOV timer resolution */ 674 uint32_t fc_edtov; /* E_D_TOV timer value */ 675 uint32_t fc_arbtov; /* ARB_TOV timer value */ 676 uint32_t fc_ratov; /* R_A_TOV timer value */ 677 uint32_t fc_rttov; /* R_T_TOV timer value */ 678 uint32_t fc_altov; /* AL_TOV timer value */ 679 uint32_t fc_crtov; /* C_R_TOV timer value */ 680 uint32_t fc_citov; /* C_I_TOV timer value */ 681 682 struct serv_parm fc_fabparam; /* fabric service parameters buffer */ 683 uint8_t alpa_map[128]; /* AL_PA map from READ_LA */ 684 685 uint32_t lmt; 686 687 uint32_t fc_topology; /* link topology, from LINK INIT */ 688 uint32_t fc_topology_changed; /* link topology, from LINK INIT */ 689 690 struct lpfc_stats fc_stat; 691 692 struct lpfc_nodelist fc_fcpnodev; /* nodelist entry for no device */ 693 uint32_t nport_event_cnt; /* timestamp for nlplist entry */ 694 695 uint8_t wwnn[8]; 696 uint8_t wwpn[8]; 697 uint32_t RandomData[7]; 698 699 /* HBA Config Parameters */ 700 uint32_t cfg_ack0; 701 uint32_t cfg_enable_npiv; 702 uint32_t cfg_enable_rrq; 703 uint32_t cfg_topology; 704 uint32_t cfg_link_speed; 705 #define LPFC_FCF_FOV 1 /* Fast fcf failover */ 706 #define LPFC_FCF_PRIORITY 2 /* Priority fcf failover */ 707 uint32_t cfg_fcf_failover_policy; 708 uint32_t cfg_fcp_io_sched; 709 uint32_t cfg_fcp2_no_tgt_reset; 710 uint32_t cfg_cr_delay; 711 uint32_t cfg_cr_count; 712 uint32_t cfg_multi_ring_support; 713 uint32_t cfg_multi_ring_rctl; 714 uint32_t cfg_multi_ring_type; 715 uint32_t cfg_poll; 716 uint32_t cfg_poll_tmo; 717 uint32_t cfg_task_mgmt_tmo; 718 uint32_t cfg_use_msi; 719 uint32_t cfg_fcp_imax; 720 uint32_t cfg_fcp_cpu_map; 721 uint32_t cfg_fcp_io_channel; 722 uint32_t cfg_total_seg_cnt; 723 uint32_t cfg_sg_seg_cnt; 724 uint32_t cfg_prot_sg_seg_cnt; 725 uint32_t cfg_sg_dma_buf_size; 726 uint64_t cfg_soft_wwnn; 727 uint64_t cfg_soft_wwpn; 728 uint32_t cfg_hba_queue_depth; 729 uint32_t cfg_enable_hba_reset; 730 uint32_t cfg_enable_hba_heartbeat; 731 uint32_t cfg_fof; 732 uint32_t cfg_EnableXLane; 733 uint8_t cfg_oas_tgt_wwpn[8]; 734 uint8_t cfg_oas_vpt_wwpn[8]; 735 uint32_t cfg_oas_lun_state; 736 #define OAS_LUN_ENABLE 1 737 #define OAS_LUN_DISABLE 0 738 uint32_t cfg_oas_lun_status; 739 #define OAS_LUN_STATUS_EXISTS 0x01 740 uint32_t cfg_oas_flags; 741 #define OAS_FIND_ANY_VPORT 0x01 742 #define OAS_FIND_ANY_TARGET 0x02 743 #define OAS_LUN_VALID 0x04 744 uint32_t cfg_XLanePriority; 745 uint32_t cfg_enable_bg; 746 uint32_t cfg_hostmem_hgp; 747 uint32_t cfg_log_verbose; 748 uint32_t cfg_aer_support; 749 uint32_t cfg_sriov_nr_virtfn; 750 uint32_t cfg_request_firmware_upgrade; 751 uint32_t cfg_iocb_cnt; 752 uint32_t cfg_suppress_link_up; 753 uint32_t cfg_rrq_xri_bitmap_sz; 754 #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */ 755 #define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */ 756 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */ 757 uint32_t cfg_enable_dss; 758 lpfc_vpd_t vpd; /* vital product data */ 759 760 struct pci_dev *pcidev; 761 struct list_head work_list; 762 uint32_t work_ha; /* Host Attention Bits for WT */ 763 uint32_t work_ha_mask; /* HA Bits owned by WT */ 764 uint32_t work_hs; /* HS stored in case of ERRAT */ 765 uint32_t work_status[2]; /* Extra status from SLIM */ 766 767 wait_queue_head_t work_waitq; 768 struct task_struct *worker_thread; 769 unsigned long data_flags; 770 771 uint32_t hbq_in_use; /* HBQs in use flag */ 772 struct list_head rb_pend_list; /* Received buffers to be processed */ 773 uint32_t hbq_count; /* Count of configured HBQs */ 774 struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */ 775 776 atomic_t fcp_qidx; /* next work queue to post work to */ 777 778 unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */ 779 unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */ 780 unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */ 781 void __iomem *slim_memmap_p; /* Kernel memory mapped address for 782 PCI BAR0 */ 783 void __iomem *ctrl_regs_memmap_p;/* Kernel memory mapped address for 784 PCI BAR2 */ 785 786 void __iomem *pci_bar0_memmap_p; /* Kernel memory mapped address for 787 PCI BAR0 with dual-ULP support */ 788 void __iomem *pci_bar2_memmap_p; /* Kernel memory mapped address for 789 PCI BAR2 with dual-ULP support */ 790 void __iomem *pci_bar4_memmap_p; /* Kernel memory mapped address for 791 PCI BAR4 with dual-ULP support */ 792 #define PCI_64BIT_BAR0 0 793 #define PCI_64BIT_BAR2 2 794 #define PCI_64BIT_BAR4 4 795 void __iomem *MBslimaddr; /* virtual address for mbox cmds */ 796 void __iomem *HAregaddr; /* virtual address for host attn reg */ 797 void __iomem *CAregaddr; /* virtual address for chip attn reg */ 798 void __iomem *HSregaddr; /* virtual address for host status 799 reg */ 800 void __iomem *HCregaddr; /* virtual address for host ctl reg */ 801 802 struct lpfc_hgp __iomem *host_gp; /* Host side get/put pointers */ 803 struct lpfc_pgp *port_gp; 804 uint32_t __iomem *hbq_put; /* Address in SLIM to HBQ put ptrs */ 805 uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */ 806 807 int brd_no; /* FC board number */ 808 char SerialNumber[32]; /* adapter Serial Number */ 809 char OptionROMVersion[32]; /* adapter BIOS / Fcode version */ 810 char ModelDesc[256]; /* Model Description */ 811 char ModelName[80]; /* Model Name */ 812 char ProgramType[256]; /* Program Type */ 813 char Port[20]; /* Port No */ 814 uint8_t vpd_flag; /* VPD data flag */ 815 816 #define VPD_MODEL_DESC 0x1 /* valid vpd model description */ 817 #define VPD_MODEL_NAME 0x2 /* valid vpd model name */ 818 #define VPD_PROGRAM_TYPE 0x4 /* valid vpd program type */ 819 #define VPD_PORT 0x8 /* valid vpd port data */ 820 #define VPD_MASK 0xf /* mask for any vpd data */ 821 822 uint8_t soft_wwn_enable; 823 824 struct timer_list fcp_poll_timer; 825 struct timer_list eratt_poll; 826 827 /* 828 * stat counters 829 */ 830 uint64_t fc4InputRequests; 831 uint64_t fc4OutputRequests; 832 uint64_t fc4ControlRequests; 833 uint64_t bg_guard_err_cnt; 834 uint64_t bg_apptag_err_cnt; 835 uint64_t bg_reftag_err_cnt; 836 837 /* fastpath list. */ 838 spinlock_t scsi_buf_list_get_lock; /* SCSI buf alloc list lock */ 839 spinlock_t scsi_buf_list_put_lock; /* SCSI buf free list lock */ 840 struct list_head lpfc_scsi_buf_list_get; 841 struct list_head lpfc_scsi_buf_list_put; 842 uint32_t total_scsi_bufs; 843 struct list_head lpfc_iocb_list; 844 uint32_t total_iocbq_bufs; 845 struct list_head active_rrq_list; 846 spinlock_t hbalock; 847 848 /* pci_mem_pools */ 849 struct pci_pool *lpfc_scsi_dma_buf_pool; 850 struct pci_pool *lpfc_mbuf_pool; 851 struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */ 852 struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */ 853 struct pci_pool *lpfc_hbq_pool; /* SLI3 hbq buffer pool */ 854 struct lpfc_dma_pool lpfc_mbuf_safety_pool; 855 856 mempool_t *mbox_mem_pool; 857 mempool_t *nlp_mem_pool; 858 mempool_t *rrq_pool; 859 mempool_t *active_rrq_pool; 860 861 struct fc_host_statistics link_stats; 862 enum intr_type_t intr_type; 863 uint32_t intr_mode; 864 #define LPFC_INTR_ERROR 0xFFFFFFFF 865 struct msix_entry msix_entries[LPFC_MSIX_VECTORS]; 866 867 struct list_head port_list; 868 struct lpfc_vport *pport; /* physical lpfc_vport pointer */ 869 uint16_t max_vpi; /* Maximum virtual nports */ 870 #define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */ 871 uint16_t max_vports; /* 872 * For IOV HBAs max_vpi can change 873 * after a reset. max_vports is max 874 * number of vports present. This can 875 * be greater than max_vpi. 876 */ 877 uint16_t vpi_base; 878 uint16_t vfi_base; 879 unsigned long *vpi_bmask; /* vpi allocation table */ 880 uint16_t *vpi_ids; 881 uint16_t vpi_count; 882 struct list_head lpfc_vpi_blk_list; 883 884 /* Data structure used by fabric iocb scheduler */ 885 struct list_head fabric_iocb_list; 886 atomic_t fabric_iocb_count; 887 struct timer_list fabric_block_timer; 888 unsigned long bit_flags; 889 #define FABRIC_COMANDS_BLOCKED 0 890 atomic_t num_rsrc_err; 891 atomic_t num_cmd_success; 892 unsigned long last_rsrc_error_time; 893 unsigned long last_ramp_down_time; 894 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS 895 struct dentry *hba_debugfs_root; 896 atomic_t debugfs_vport_count; 897 struct dentry *debug_hbqinfo; 898 struct dentry *debug_dumpHostSlim; 899 struct dentry *debug_dumpHBASlim; 900 struct dentry *debug_dumpData; /* BlockGuard BPL */ 901 struct dentry *debug_dumpDif; /* BlockGuard BPL */ 902 struct dentry *debug_InjErrLBA; /* LBA to inject errors at */ 903 struct dentry *debug_InjErrNPortID; /* NPortID to inject errors at */ 904 struct dentry *debug_InjErrWWPN; /* WWPN to inject errors at */ 905 struct dentry *debug_writeGuard; /* inject write guard_tag errors */ 906 struct dentry *debug_writeApp; /* inject write app_tag errors */ 907 struct dentry *debug_writeRef; /* inject write ref_tag errors */ 908 struct dentry *debug_readGuard; /* inject read guard_tag errors */ 909 struct dentry *debug_readApp; /* inject read app_tag errors */ 910 struct dentry *debug_readRef; /* inject read ref_tag errors */ 911 912 /* T10 DIF error injection */ 913 uint32_t lpfc_injerr_wgrd_cnt; 914 uint32_t lpfc_injerr_wapp_cnt; 915 uint32_t lpfc_injerr_wref_cnt; 916 uint32_t lpfc_injerr_rgrd_cnt; 917 uint32_t lpfc_injerr_rapp_cnt; 918 uint32_t lpfc_injerr_rref_cnt; 919 uint32_t lpfc_injerr_nportid; 920 struct lpfc_name lpfc_injerr_wwpn; 921 sector_t lpfc_injerr_lba; 922 #define LPFC_INJERR_LBA_OFF (sector_t)(-1) 923 924 struct dentry *debug_slow_ring_trc; 925 struct lpfc_debugfs_trc *slow_ring_trc; 926 atomic_t slow_ring_trc_cnt; 927 /* iDiag debugfs sub-directory */ 928 struct dentry *idiag_root; 929 struct dentry *idiag_pci_cfg; 930 struct dentry *idiag_bar_acc; 931 struct dentry *idiag_que_info; 932 struct dentry *idiag_que_acc; 933 struct dentry *idiag_drb_acc; 934 struct dentry *idiag_ctl_acc; 935 struct dentry *idiag_mbx_acc; 936 struct dentry *idiag_ext_acc; 937 #endif 938 939 /* Used for deferred freeing of ELS data buffers */ 940 struct list_head elsbuf; 941 int elsbuf_cnt; 942 int elsbuf_prev_cnt; 943 944 uint8_t temp_sensor_support; 945 /* Fields used for heart beat. */ 946 unsigned long last_completion_time; 947 unsigned long skipped_hb; 948 struct timer_list hb_tmofunc; 949 uint8_t hb_outstanding; 950 struct timer_list rrq_tmr; 951 enum hba_temp_state over_temp_state; 952 /* ndlp reference management */ 953 spinlock_t ndlp_lock; 954 /* 955 * Following bit will be set for all buffer tags which are not 956 * associated with any HBQ. 957 */ 958 #define QUE_BUFTAG_BIT (1<<31) 959 uint32_t buffer_tag_count; 960 int wait_4_mlo_maint_flg; 961 wait_queue_head_t wait_4_mlo_m_q; 962 /* data structure used for latency data collection */ 963 #define LPFC_NO_BUCKET 0 964 #define LPFC_LINEAR_BUCKET 1 965 #define LPFC_POWER2_BUCKET 2 966 uint8_t bucket_type; 967 uint32_t bucket_base; 968 uint32_t bucket_step; 969 970 /* Maximum number of events that can be outstanding at any time*/ 971 #define LPFC_MAX_EVT_COUNT 512 972 atomic_t fast_event_count; 973 uint32_t fcoe_eventtag; 974 uint32_t fcoe_eventtag_at_fcf_scan; 975 uint32_t fcoe_cvl_eventtag; 976 uint32_t fcoe_cvl_eventtag_attn; 977 struct lpfc_fcf fcf; 978 uint8_t fc_map[3]; 979 uint8_t valid_vlan; 980 uint16_t vlan_id; 981 struct list_head fcf_conn_rec_list; 982 983 spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */ 984 struct list_head ct_ev_waiters; 985 struct unsol_rcv_ct_ctx ct_ctx[LPFC_CT_CTX_MAX]; 986 uint32_t ctx_idx; 987 988 uint8_t menlo_flag; /* menlo generic flags */ 989 #define HBA_MENLO_SUPPORT 0x1 /* HBA supports menlo commands */ 990 uint32_t iocb_cnt; 991 uint32_t iocb_max; 992 atomic_t sdev_cnt; 993 uint8_t fips_spec_rev; 994 uint8_t fips_level; 995 spinlock_t devicelock; /* lock for luns list */ 996 mempool_t *device_data_mem_pool; 997 struct list_head luns; 998 }; 999 1000 static inline struct Scsi_Host * 1001 lpfc_shost_from_vport(struct lpfc_vport *vport) 1002 { 1003 return container_of((void *) vport, struct Scsi_Host, hostdata[0]); 1004 } 1005 1006 static inline void 1007 lpfc_set_loopback_flag(struct lpfc_hba *phba) 1008 { 1009 if (phba->cfg_topology == FLAGS_LOCAL_LB) 1010 phba->link_flag |= LS_LOOPBACK_MODE; 1011 else 1012 phba->link_flag &= ~LS_LOOPBACK_MODE; 1013 } 1014 1015 static inline int 1016 lpfc_is_link_up(struct lpfc_hba *phba) 1017 { 1018 return phba->link_state == LPFC_LINK_UP || 1019 phba->link_state == LPFC_CLEAR_LA || 1020 phba->link_state == LPFC_HBA_READY; 1021 } 1022 1023 static inline void 1024 lpfc_worker_wake_up(struct lpfc_hba *phba) 1025 { 1026 /* Set the lpfc data pending flag */ 1027 set_bit(LPFC_DATA_READY, &phba->data_flags); 1028 1029 /* Wake up worker thread */ 1030 wake_up(&phba->work_waitq); 1031 return; 1032 } 1033 1034 static inline int 1035 lpfc_readl(void __iomem *addr, uint32_t *data) 1036 { 1037 uint32_t temp; 1038 temp = readl(addr); 1039 if (temp == 0xffffffff) 1040 return -EIO; 1041 *data = temp; 1042 return 0; 1043 } 1044 1045 static inline int 1046 lpfc_sli_read_hs(struct lpfc_hba *phba) 1047 { 1048 /* 1049 * There was a link/board error. Read the status register to retrieve 1050 * the error event and process it. 1051 */ 1052 phba->sli.slistat.err_attn_event++; 1053 1054 /* Save status info and check for unplug error */ 1055 if (lpfc_readl(phba->HSregaddr, &phba->work_hs) || 1056 lpfc_readl(phba->MBslimaddr + 0xa8, &phba->work_status[0]) || 1057 lpfc_readl(phba->MBslimaddr + 0xac, &phba->work_status[1])) { 1058 return -EIO; 1059 } 1060 1061 /* Clear chip Host Attention error bit */ 1062 writel(HA_ERATT, phba->HAregaddr); 1063 readl(phba->HAregaddr); /* flush */ 1064 phba->pport->stopped = 1; 1065 1066 return 0; 1067 } 1068