1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Support for SATA devices on Serial Attached SCSI (SAS) controllers 4 * 5 * Copyright (C) 2006 IBM Corporation 6 * 7 * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation 8 */ 9 10 #include <linux/scatterlist.h> 11 #include <linux/slab.h> 12 #include <linux/async.h> 13 #include <linux/export.h> 14 15 #include <scsi/sas_ata.h> 16 #include "sas_internal.h" 17 #include <scsi/scsi_host.h> 18 #include <scsi/scsi_device.h> 19 #include <scsi/scsi_tcq.h> 20 #include <scsi/scsi.h> 21 #include <scsi/scsi_transport.h> 22 #include <scsi/scsi_transport_sas.h> 23 #include "../scsi_sas_internal.h" 24 #include "../scsi_transport_api.h" 25 #include <scsi/scsi_eh.h> 26 27 static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) 28 { 29 /* Cheesy attempt to translate SAS errors into ATA. Hah! */ 30 31 /* transport error */ 32 if (ts->resp == SAS_TASK_UNDELIVERED) 33 return AC_ERR_ATA_BUS; 34 35 /* ts->resp == SAS_TASK_COMPLETE */ 36 /* task delivered, what happened afterwards? */ 37 switch (ts->stat) { 38 case SAS_DEV_NO_RESPONSE: 39 return AC_ERR_TIMEOUT; 40 41 case SAS_INTERRUPTED: 42 case SAS_PHY_DOWN: 43 case SAS_NAK_R_ERR: 44 return AC_ERR_ATA_BUS; 45 46 47 case SAS_DATA_UNDERRUN: 48 /* 49 * Some programs that use the taskfile interface 50 * (smartctl in particular) can cause underrun 51 * problems. Ignore these errors, perhaps at our 52 * peril. 53 */ 54 return 0; 55 56 case SAS_DATA_OVERRUN: 57 case SAS_QUEUE_FULL: 58 case SAS_DEVICE_UNKNOWN: 59 case SAS_SG_ERR: 60 return AC_ERR_INVALID; 61 62 case SAS_OPEN_TO: 63 case SAS_OPEN_REJECT: 64 pr_warn("%s: Saw error %d. What to do?\n", 65 __func__, ts->stat); 66 return AC_ERR_OTHER; 67 68 case SAM_STAT_CHECK_CONDITION: 69 case SAS_ABORTED_TASK: 70 return AC_ERR_DEV; 71 72 case SAS_PROTO_RESPONSE: 73 /* This means the ending_fis has the error 74 * value; return 0 here to collect it */ 75 return 0; 76 default: 77 return 0; 78 } 79 } 80 81 static void sas_ata_task_done(struct sas_task *task) 82 { 83 struct ata_queued_cmd *qc = task->uldd_task; 84 struct domain_device *dev = task->dev; 85 struct task_status_struct *stat = &task->task_status; 86 struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; 87 struct sas_ha_struct *sas_ha = dev->port->ha; 88 enum ata_completion_errors ac; 89 unsigned long flags; 90 struct ata_link *link; 91 struct ata_port *ap; 92 93 spin_lock_irqsave(&dev->done_lock, flags); 94 if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) 95 task = NULL; 96 else if (qc && qc->scsicmd) 97 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 98 spin_unlock_irqrestore(&dev->done_lock, flags); 99 100 /* check if libsas-eh got to the task before us */ 101 if (unlikely(!task)) 102 return; 103 104 if (!qc) 105 goto qc_already_gone; 106 107 ap = qc->ap; 108 link = &ap->link; 109 110 spin_lock_irqsave(ap->lock, flags); 111 /* check if we lost the race with libata/sas_ata_post_internal() */ 112 if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { 113 spin_unlock_irqrestore(ap->lock, flags); 114 if (qc->scsicmd) 115 goto qc_already_gone; 116 else { 117 /* if eh is not involved and the port is frozen then the 118 * ata internal abort process has taken responsibility 119 * for this sas_task 120 */ 121 return; 122 } 123 } 124 125 if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || 126 ((stat->stat == SAM_STAT_CHECK_CONDITION && 127 dev->sata_dev.class == ATA_DEV_ATAPI))) { 128 memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE); 129 130 if (!link->sactive) { 131 qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 132 } else { 133 link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]); 134 if (unlikely(link->eh_info.err_mask)) 135 qc->flags |= ATA_QCFLAG_FAILED; 136 } 137 } else { 138 ac = sas_to_ata_err(stat); 139 if (ac) { 140 pr_warn("%s: SAS error 0x%x\n", __func__, stat->stat); 141 /* We saw a SAS error. Send a vague error. */ 142 if (!link->sactive) { 143 qc->err_mask = ac; 144 } else { 145 link->eh_info.err_mask |= AC_ERR_DEV; 146 qc->flags |= ATA_QCFLAG_FAILED; 147 } 148 149 dev->sata_dev.fis[3] = 0x04; /* status err */ 150 dev->sata_dev.fis[2] = ATA_ERR; 151 } 152 } 153 154 qc->lldd_task = NULL; 155 ata_qc_complete(qc); 156 spin_unlock_irqrestore(ap->lock, flags); 157 158 qc_already_gone: 159 sas_free_task(task); 160 } 161 162 static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) 163 __must_hold(ap->lock) 164 { 165 struct sas_task *task; 166 struct scatterlist *sg; 167 int ret = AC_ERR_SYSTEM; 168 unsigned int si, xfer = 0; 169 struct ata_port *ap = qc->ap; 170 struct domain_device *dev = ap->private_data; 171 struct sas_ha_struct *sas_ha = dev->port->ha; 172 struct Scsi_Host *host = sas_ha->core.shost; 173 struct sas_internal *i = to_sas_internal(host->transportt); 174 175 /* TODO: we should try to remove that unlock */ 176 spin_unlock(ap->lock); 177 178 /* If the device fell off, no sense in issuing commands */ 179 if (test_bit(SAS_DEV_GONE, &dev->state)) 180 goto out; 181 182 task = sas_alloc_task(GFP_ATOMIC); 183 if (!task) 184 goto out; 185 task->dev = dev; 186 task->task_proto = SAS_PROTOCOL_STP; 187 task->task_done = sas_ata_task_done; 188 189 if (qc->tf.command == ATA_CMD_FPDMA_WRITE || 190 qc->tf.command == ATA_CMD_FPDMA_READ || 191 qc->tf.command == ATA_CMD_FPDMA_RECV || 192 qc->tf.command == ATA_CMD_FPDMA_SEND || 193 qc->tf.command == ATA_CMD_NCQ_NON_DATA) { 194 /* Need to zero out the tag libata assigned us */ 195 qc->tf.nsect = 0; 196 } 197 198 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *)&task->ata_task.fis); 199 task->uldd_task = qc; 200 if (ata_is_atapi(qc->tf.protocol)) { 201 memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); 202 task->total_xfer_len = qc->nbytes; 203 task->num_scatter = qc->n_elem; 204 } else { 205 for_each_sg(qc->sg, sg, qc->n_elem, si) 206 xfer += sg_dma_len(sg); 207 208 task->total_xfer_len = xfer; 209 task->num_scatter = si; 210 } 211 212 task->data_dir = qc->dma_dir; 213 task->scatter = qc->sg; 214 task->ata_task.retry_count = 1; 215 task->task_state_flags = SAS_TASK_STATE_PENDING; 216 qc->lldd_task = task; 217 218 task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol); 219 task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol); 220 221 if (qc->scsicmd) 222 ASSIGN_SAS_TASK(qc->scsicmd, task); 223 224 ret = i->dft->lldd_execute_task(task, GFP_ATOMIC); 225 if (ret) { 226 pr_debug("lldd_execute_task returned: %d\n", ret); 227 228 if (qc->scsicmd) 229 ASSIGN_SAS_TASK(qc->scsicmd, NULL); 230 sas_free_task(task); 231 qc->lldd_task = NULL; 232 ret = AC_ERR_SYSTEM; 233 } 234 235 out: 236 spin_lock(ap->lock); 237 return ret; 238 } 239 240 static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) 241 { 242 struct domain_device *dev = qc->ap->private_data; 243 244 ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf); 245 return true; 246 } 247 248 static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) 249 { 250 return to_sas_internal(dev->port->ha->core.shost->transportt); 251 } 252 253 static int sas_get_ata_command_set(struct domain_device *dev); 254 255 int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) 256 { 257 if (phy->attached_tproto & SAS_PROTOCOL_STP) 258 dev->tproto = phy->attached_tproto; 259 if (phy->attached_sata_dev) 260 dev->tproto |= SAS_SATA_DEV; 261 262 if (phy->attached_dev_type == SAS_SATA_PENDING) 263 dev->dev_type = SAS_SATA_PENDING; 264 else { 265 int res; 266 267 dev->dev_type = SAS_SATA_DEV; 268 res = sas_get_report_phy_sata(dev->parent, phy->phy_id, 269 &dev->sata_dev.rps_resp); 270 if (res) { 271 pr_debug("report phy sata to %016llx:%02d returned 0x%x\n", 272 SAS_ADDR(dev->parent->sas_addr), 273 phy->phy_id, res); 274 return res; 275 } 276 memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, 277 sizeof(struct dev_to_host_fis)); 278 dev->sata_dev.class = sas_get_ata_command_set(dev); 279 } 280 return 0; 281 } 282 283 static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) 284 { 285 int res; 286 287 /* we weren't pending, so successfully end the reset sequence now */ 288 if (dev->dev_type != SAS_SATA_PENDING) 289 return 1; 290 291 /* hmmm, if this succeeds do we need to repost the domain_device to the 292 * lldd so it can pick up new parameters? 293 */ 294 res = sas_get_ata_info(dev, phy); 295 if (res) 296 return 0; /* retry */ 297 else 298 return 1; 299 } 300 301 static int smp_ata_check_ready(struct ata_link *link) 302 { 303 int res; 304 struct ata_port *ap = link->ap; 305 struct domain_device *dev = ap->private_data; 306 struct domain_device *ex_dev = dev->parent; 307 struct sas_phy *phy = sas_get_local_phy(dev); 308 struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; 309 310 res = sas_ex_phy_discover(ex_dev, phy->number); 311 sas_put_local_phy(phy); 312 313 /* break the wait early if the expander is unreachable, 314 * otherwise keep polling 315 */ 316 if (res == -ECOMM) 317 return res; 318 if (res != SMP_RESP_FUNC_ACC) 319 return 0; 320 321 switch (ex_phy->attached_dev_type) { 322 case SAS_SATA_PENDING: 323 return 0; 324 case SAS_END_DEVICE: 325 if (ex_phy->attached_sata_dev) 326 return sas_ata_clear_pending(dev, ex_phy); 327 /* fall through */ 328 default: 329 return -ENODEV; 330 } 331 } 332 333 static int local_ata_check_ready(struct ata_link *link) 334 { 335 struct ata_port *ap = link->ap; 336 struct domain_device *dev = ap->private_data; 337 struct sas_internal *i = dev_to_sas_internal(dev); 338 339 if (i->dft->lldd_ata_check_ready) 340 return i->dft->lldd_ata_check_ready(dev); 341 else { 342 /* lldd's that don't implement 'ready' checking get the 343 * old default behavior of not coordinating reset 344 * recovery with libata 345 */ 346 return 1; 347 } 348 } 349 350 static int sas_ata_printk(const char *level, const struct domain_device *ddev, 351 const char *fmt, ...) 352 { 353 struct ata_port *ap = ddev->sata_dev.ap; 354 struct device *dev = &ddev->rphy->dev; 355 struct va_format vaf; 356 va_list args; 357 int r; 358 359 va_start(args, fmt); 360 361 vaf.fmt = fmt; 362 vaf.va = &args; 363 364 r = printk("%s" SAS_FMT "ata%u: %s: %pV", 365 level, ap->print_id, dev_name(dev), &vaf); 366 367 va_end(args); 368 369 return r; 370 } 371 372 static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, 373 unsigned long deadline) 374 { 375 int ret = 0, res; 376 struct sas_phy *phy; 377 struct ata_port *ap = link->ap; 378 int (*check_ready)(struct ata_link *link); 379 struct domain_device *dev = ap->private_data; 380 struct sas_internal *i = dev_to_sas_internal(dev); 381 382 res = i->dft->lldd_I_T_nexus_reset(dev); 383 if (res == -ENODEV) 384 return res; 385 386 if (res != TMF_RESP_FUNC_COMPLETE) 387 sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); 388 389 phy = sas_get_local_phy(dev); 390 if (scsi_is_sas_phy_local(phy)) 391 check_ready = local_ata_check_ready; 392 else 393 check_ready = smp_ata_check_ready; 394 sas_put_local_phy(phy); 395 396 ret = ata_wait_after_reset(link, deadline, check_ready); 397 if (ret && ret != -EAGAIN) 398 sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); 399 400 *class = dev->sata_dev.class; 401 402 ap->cbl = ATA_CBL_SATA; 403 return ret; 404 } 405 406 /* 407 * notify the lldd to forget the sas_task for this internal ata command 408 * that bypasses scsi-eh 409 */ 410 static void sas_ata_internal_abort(struct sas_task *task) 411 { 412 struct sas_internal *si = dev_to_sas_internal(task->dev); 413 unsigned long flags; 414 int res; 415 416 spin_lock_irqsave(&task->task_state_lock, flags); 417 if (task->task_state_flags & SAS_TASK_STATE_ABORTED || 418 task->task_state_flags & SAS_TASK_STATE_DONE) { 419 spin_unlock_irqrestore(&task->task_state_lock, flags); 420 pr_debug("%s: Task %p already finished.\n", __func__, task); 421 goto out; 422 } 423 task->task_state_flags |= SAS_TASK_STATE_ABORTED; 424 spin_unlock_irqrestore(&task->task_state_lock, flags); 425 426 res = si->dft->lldd_abort_task(task); 427 428 spin_lock_irqsave(&task->task_state_lock, flags); 429 if (task->task_state_flags & SAS_TASK_STATE_DONE || 430 res == TMF_RESP_FUNC_COMPLETE) { 431 spin_unlock_irqrestore(&task->task_state_lock, flags); 432 goto out; 433 } 434 435 /* XXX we are not prepared to deal with ->lldd_abort_task() 436 * failures. TODO: lldds need to unconditionally forget about 437 * aborted ata tasks, otherwise we (likely) leak the sas task 438 * here 439 */ 440 pr_warn("%s: Task %p leaked.\n", __func__, task); 441 442 if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) 443 task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; 444 spin_unlock_irqrestore(&task->task_state_lock, flags); 445 446 return; 447 out: 448 sas_free_task(task); 449 } 450 451 static void sas_ata_post_internal(struct ata_queued_cmd *qc) 452 { 453 if (qc->flags & ATA_QCFLAG_FAILED) 454 qc->err_mask |= AC_ERR_OTHER; 455 456 if (qc->err_mask) { 457 /* 458 * Find the sas_task and kill it. By this point, libata 459 * has decided to kill the qc and has frozen the port. 460 * In this state sas_ata_task_done() will no longer free 461 * the sas_task, so we need to notify the lldd (via 462 * ->lldd_abort_task) that the task is dead and free it 463 * ourselves. 464 */ 465 struct sas_task *task = qc->lldd_task; 466 467 qc->lldd_task = NULL; 468 if (!task) 469 return; 470 task->uldd_task = NULL; 471 sas_ata_internal_abort(task); 472 } 473 } 474 475 476 static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) 477 { 478 struct domain_device *dev = ap->private_data; 479 struct sas_internal *i = dev_to_sas_internal(dev); 480 481 if (i->dft->lldd_ata_set_dmamode) 482 i->dft->lldd_ata_set_dmamode(dev); 483 } 484 485 static void sas_ata_sched_eh(struct ata_port *ap) 486 { 487 struct domain_device *dev = ap->private_data; 488 struct sas_ha_struct *ha = dev->port->ha; 489 unsigned long flags; 490 491 spin_lock_irqsave(&ha->lock, flags); 492 if (!test_and_set_bit(SAS_DEV_EH_PENDING, &dev->state)) 493 ha->eh_active++; 494 ata_std_sched_eh(ap); 495 spin_unlock_irqrestore(&ha->lock, flags); 496 } 497 498 void sas_ata_end_eh(struct ata_port *ap) 499 { 500 struct domain_device *dev = ap->private_data; 501 struct sas_ha_struct *ha = dev->port->ha; 502 unsigned long flags; 503 504 spin_lock_irqsave(&ha->lock, flags); 505 if (test_and_clear_bit(SAS_DEV_EH_PENDING, &dev->state)) 506 ha->eh_active--; 507 spin_unlock_irqrestore(&ha->lock, flags); 508 } 509 510 static struct ata_port_operations sas_sata_ops = { 511 .prereset = ata_std_prereset, 512 .hardreset = sas_ata_hard_reset, 513 .postreset = ata_std_postreset, 514 .error_handler = ata_std_error_handler, 515 .post_internal_cmd = sas_ata_post_internal, 516 .qc_defer = ata_std_qc_defer, 517 .qc_prep = ata_noop_qc_prep, 518 .qc_issue = sas_ata_qc_issue, 519 .qc_fill_rtf = sas_ata_qc_fill_rtf, 520 .port_start = ata_sas_port_start, 521 .port_stop = ata_sas_port_stop, 522 .set_dmamode = sas_ata_set_dmamode, 523 .sched_eh = sas_ata_sched_eh, 524 .end_eh = sas_ata_end_eh, 525 }; 526 527 static struct ata_port_info sata_port_info = { 528 .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ | 529 ATA_FLAG_SAS_HOST | ATA_FLAG_FPDMA_AUX, 530 .pio_mask = ATA_PIO4, 531 .mwdma_mask = ATA_MWDMA2, 532 .udma_mask = ATA_UDMA6, 533 .port_ops = &sas_sata_ops 534 }; 535 536 int sas_ata_init(struct domain_device *found_dev) 537 { 538 struct sas_ha_struct *ha = found_dev->port->ha; 539 struct Scsi_Host *shost = ha->core.shost; 540 struct ata_host *ata_host; 541 struct ata_port *ap; 542 int rc; 543 544 ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL); 545 if (!ata_host) { 546 pr_err("ata host alloc failed.\n"); 547 return -ENOMEM; 548 } 549 550 ata_host_init(ata_host, ha->dev, &sas_sata_ops); 551 552 ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost); 553 if (!ap) { 554 pr_err("ata_sas_port_alloc failed.\n"); 555 rc = -ENODEV; 556 goto free_host; 557 } 558 559 ap->private_data = found_dev; 560 ap->cbl = ATA_CBL_SATA; 561 ap->scsi_host = shost; 562 rc = ata_sas_port_init(ap); 563 if (rc) 564 goto destroy_port; 565 566 rc = ata_sas_tport_add(ata_host->dev, ap); 567 if (rc) 568 goto destroy_port; 569 570 found_dev->sata_dev.ata_host = ata_host; 571 found_dev->sata_dev.ap = ap; 572 573 return 0; 574 575 destroy_port: 576 ata_sas_port_destroy(ap); 577 free_host: 578 ata_host_put(ata_host); 579 return rc; 580 } 581 582 void sas_ata_task_abort(struct sas_task *task) 583 { 584 struct ata_queued_cmd *qc = task->uldd_task; 585 struct completion *waiting; 586 587 /* Bounce SCSI-initiated commands to the SCSI EH */ 588 if (qc->scsicmd) { 589 blk_abort_request(qc->scsicmd->request); 590 return; 591 } 592 593 /* Internal command, fake a timeout and complete. */ 594 qc->flags &= ~ATA_QCFLAG_ACTIVE; 595 qc->flags |= ATA_QCFLAG_FAILED; 596 qc->err_mask |= AC_ERR_TIMEOUT; 597 waiting = qc->private_data; 598 complete(waiting); 599 } 600 601 static int sas_get_ata_command_set(struct domain_device *dev) 602 { 603 struct dev_to_host_fis *fis = 604 (struct dev_to_host_fis *) dev->frame_rcvd; 605 struct ata_taskfile tf; 606 607 if (dev->dev_type == SAS_SATA_PENDING) 608 return ATA_DEV_UNKNOWN; 609 610 ata_tf_from_fis((const u8 *)fis, &tf); 611 612 return ata_dev_classify(&tf); 613 } 614 615 void sas_probe_sata(struct asd_sas_port *port) 616 { 617 struct domain_device *dev, *n; 618 619 mutex_lock(&port->ha->disco_mutex); 620 list_for_each_entry(dev, &port->disco_list, disco_list_node) { 621 if (!dev_is_sata(dev)) 622 continue; 623 624 ata_sas_async_probe(dev->sata_dev.ap); 625 } 626 mutex_unlock(&port->ha->disco_mutex); 627 628 list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { 629 if (!dev_is_sata(dev)) 630 continue; 631 632 sas_ata_wait_eh(dev); 633 634 /* if libata could not bring the link up, don't surface 635 * the device 636 */ 637 if (!ata_dev_enabled(sas_to_ata_dev(dev))) 638 sas_fail_probe(dev, __func__, -ENODEV); 639 } 640 641 } 642 643 static void sas_ata_flush_pm_eh(struct asd_sas_port *port, const char *func) 644 { 645 struct domain_device *dev, *n; 646 647 list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) { 648 if (!dev_is_sata(dev)) 649 continue; 650 651 sas_ata_wait_eh(dev); 652 653 /* if libata failed to power manage the device, tear it down */ 654 if (ata_dev_disabled(sas_to_ata_dev(dev))) 655 sas_fail_probe(dev, func, -ENODEV); 656 } 657 } 658 659 void sas_suspend_sata(struct asd_sas_port *port) 660 { 661 struct domain_device *dev; 662 663 mutex_lock(&port->ha->disco_mutex); 664 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 665 struct sata_device *sata; 666 667 if (!dev_is_sata(dev)) 668 continue; 669 670 sata = &dev->sata_dev; 671 if (sata->ap->pm_mesg.event == PM_EVENT_SUSPEND) 672 continue; 673 674 ata_sas_port_suspend(sata->ap); 675 } 676 mutex_unlock(&port->ha->disco_mutex); 677 678 sas_ata_flush_pm_eh(port, __func__); 679 } 680 681 void sas_resume_sata(struct asd_sas_port *port) 682 { 683 struct domain_device *dev; 684 685 mutex_lock(&port->ha->disco_mutex); 686 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 687 struct sata_device *sata; 688 689 if (!dev_is_sata(dev)) 690 continue; 691 692 sata = &dev->sata_dev; 693 if (sata->ap->pm_mesg.event == PM_EVENT_ON) 694 continue; 695 696 ata_sas_port_resume(sata->ap); 697 } 698 mutex_unlock(&port->ha->disco_mutex); 699 700 sas_ata_flush_pm_eh(port, __func__); 701 } 702 703 /** 704 * sas_discover_sata - discover an STP/SATA domain device 705 * @dev: pointer to struct domain_device of interest 706 * 707 * Devices directly attached to a HA port, have no parents. All other 708 * devices do, and should have their "parent" pointer set appropriately 709 * before calling this function. 710 */ 711 int sas_discover_sata(struct domain_device *dev) 712 { 713 int res; 714 715 if (dev->dev_type == SAS_SATA_PM) 716 return -ENODEV; 717 718 dev->sata_dev.class = sas_get_ata_command_set(dev); 719 sas_fill_in_rphy(dev, dev->rphy); 720 721 res = sas_notify_lldd_dev_found(dev); 722 if (res) 723 return res; 724 725 return 0; 726 } 727 728 static void async_sas_ata_eh(void *data, async_cookie_t cookie) 729 { 730 struct domain_device *dev = data; 731 struct ata_port *ap = dev->sata_dev.ap; 732 struct sas_ha_struct *ha = dev->port->ha; 733 734 sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); 735 ata_scsi_port_error_handler(ha->core.shost, ap); 736 sas_put_device(dev); 737 } 738 739 void sas_ata_strategy_handler(struct Scsi_Host *shost) 740 { 741 struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); 742 ASYNC_DOMAIN_EXCLUSIVE(async); 743 int i; 744 745 /* it's ok to defer revalidation events during ata eh, these 746 * disks are in one of three states: 747 * 1/ present for initial domain discovery, and these 748 * resets will cause bcn flutters 749 * 2/ hot removed, we'll discover that after eh fails 750 * 3/ hot added after initial discovery, lost the race, and need 751 * to catch the next train. 752 */ 753 sas_disable_revalidation(sas_ha); 754 755 spin_lock_irq(&sas_ha->phy_port_lock); 756 for (i = 0; i < sas_ha->num_phys; i++) { 757 struct asd_sas_port *port = sas_ha->sas_port[i]; 758 struct domain_device *dev; 759 760 spin_lock(&port->dev_list_lock); 761 list_for_each_entry(dev, &port->dev_list, dev_list_node) { 762 if (!dev_is_sata(dev)) 763 continue; 764 765 /* hold a reference over eh since we may be 766 * racing with final remove once all commands 767 * are completed 768 */ 769 kref_get(&dev->kref); 770 771 async_schedule_domain(async_sas_ata_eh, dev, &async); 772 } 773 spin_unlock(&port->dev_list_lock); 774 } 775 spin_unlock_irq(&sas_ha->phy_port_lock); 776 777 async_synchronize_full_domain(&async); 778 779 sas_enable_revalidation(sas_ha); 780 } 781 782 void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, 783 struct list_head *done_q) 784 { 785 struct scsi_cmnd *cmd, *n; 786 struct domain_device *eh_dev; 787 788 do { 789 LIST_HEAD(sata_q); 790 eh_dev = NULL; 791 792 list_for_each_entry_safe(cmd, n, work_q, eh_entry) { 793 struct domain_device *ddev = cmd_to_domain_dev(cmd); 794 795 if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) 796 continue; 797 if (eh_dev && eh_dev != ddev) 798 continue; 799 eh_dev = ddev; 800 list_move(&cmd->eh_entry, &sata_q); 801 } 802 803 if (!list_empty(&sata_q)) { 804 struct ata_port *ap = eh_dev->sata_dev.ap; 805 806 sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); 807 ata_scsi_cmd_error_handler(shost, ap, &sata_q); 808 /* 809 * ata's error handler may leave the cmd on the list 810 * so make sure they don't remain on a stack list 811 * about to go out of scope. 812 * 813 * This looks strange, since the commands are 814 * now part of no list, but the next error 815 * action will be ata_port_error_handler() 816 * which takes no list and sweeps them up 817 * anyway from the ata tag array. 818 */ 819 while (!list_empty(&sata_q)) 820 list_del_init(sata_q.next); 821 } 822 } while (eh_dev); 823 } 824 825 void sas_ata_schedule_reset(struct domain_device *dev) 826 { 827 struct ata_eh_info *ehi; 828 struct ata_port *ap; 829 unsigned long flags; 830 831 if (!dev_is_sata(dev)) 832 return; 833 834 ap = dev->sata_dev.ap; 835 ehi = &ap->link.eh_info; 836 837 spin_lock_irqsave(ap->lock, flags); 838 ehi->err_mask |= AC_ERR_TIMEOUT; 839 ehi->action |= ATA_EH_RESET; 840 ata_port_schedule_eh(ap); 841 spin_unlock_irqrestore(ap->lock, flags); 842 } 843 EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); 844 845 void sas_ata_wait_eh(struct domain_device *dev) 846 { 847 struct ata_port *ap; 848 849 if (!dev_is_sata(dev)) 850 return; 851 852 ap = dev->sata_dev.ap; 853 ata_port_wait_eh(ap); 854 } 855