xref: /linux/drivers/scsi/libfc/fc_rport.c (revision e58e871becec2d3b04ed91c0c16fe8deac9c9dfa)
1 /*
2  * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms and conditions of the GNU General Public License,
6  * version 2, as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope it will be useful, but WITHOUT
9  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11  * more details.
12  *
13  * You should have received a copy of the GNU General Public License along with
14  * this program; if not, write to the Free Software Foundation, Inc.,
15  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
16  *
17  * Maintained at www.Open-FCoE.org
18  */
19 
20 /*
21  * RPORT GENERAL INFO
22  *
23  * This file contains all processing regarding fc_rports. It contains the
24  * rport state machine and does all rport interaction with the transport class.
25  * There should be no other places in libfc that interact directly with the
26  * transport class in regards to adding and deleting rports.
27  *
28  * fc_rport's represent N_Port's within the fabric.
29  */
30 
31 /*
32  * RPORT LOCKING
33  *
34  * The rport should never hold the rport mutex and then attempt to acquire
35  * either the lport or disc mutexes. The rport's mutex is considered lesser
36  * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
37  * more comments on the hierarchy.
38  *
39  * The locking strategy is similar to the lport's strategy. The lock protects
40  * the rport's states and is held and released by the entry points to the rport
41  * block. All _enter_* functions correspond to rport states and expect the rport
42  * mutex to be locked before calling them. This means that rports only handle
43  * one request or response at a time, since they're not critical for the I/O
44  * path this potential over-use of the mutex is acceptable.
45  */
46 
47 /*
48  * RPORT REFERENCE COUNTING
49  *
50  * A rport reference should be taken when:
51  * - an rport is allocated
52  * - a workqueue item is scheduled
53  * - an ELS request is send
54  * The reference should be dropped when:
55  * - the workqueue function has finished
56  * - the ELS response is handled
57  * - an rport is removed
58  */
59 
60 #include <linux/kernel.h>
61 #include <linux/spinlock.h>
62 #include <linux/interrupt.h>
63 #include <linux/slab.h>
64 #include <linux/rcupdate.h>
65 #include <linux/timer.h>
66 #include <linux/workqueue.h>
67 #include <linux/export.h>
68 #include <linux/rculist.h>
69 
70 #include <asm/unaligned.h>
71 
72 #include <scsi/libfc.h>
73 #include <scsi/fc_encode.h>
74 
75 #include "fc_libfc.h"
76 
77 static struct workqueue_struct *rport_event_queue;
78 
79 static void fc_rport_enter_flogi(struct fc_rport_priv *);
80 static void fc_rport_enter_plogi(struct fc_rport_priv *);
81 static void fc_rport_enter_prli(struct fc_rport_priv *);
82 static void fc_rport_enter_rtv(struct fc_rport_priv *);
83 static void fc_rport_enter_ready(struct fc_rport_priv *);
84 static void fc_rport_enter_logo(struct fc_rport_priv *);
85 static void fc_rport_enter_adisc(struct fc_rport_priv *);
86 
87 static void fc_rport_recv_plogi_req(struct fc_lport *, struct fc_frame *);
88 static void fc_rport_recv_prli_req(struct fc_rport_priv *, struct fc_frame *);
89 static void fc_rport_recv_prlo_req(struct fc_rport_priv *, struct fc_frame *);
90 static void fc_rport_recv_logo_req(struct fc_lport *, struct fc_frame *);
91 static void fc_rport_timeout(struct work_struct *);
92 static void fc_rport_error(struct fc_rport_priv *, int);
93 static void fc_rport_error_retry(struct fc_rport_priv *, int);
94 static void fc_rport_work(struct work_struct *);
95 
96 static const char *fc_rport_state_names[] = {
97 	[RPORT_ST_INIT] = "Init",
98 	[RPORT_ST_FLOGI] = "FLOGI",
99 	[RPORT_ST_PLOGI_WAIT] = "PLOGI_WAIT",
100 	[RPORT_ST_PLOGI] = "PLOGI",
101 	[RPORT_ST_PRLI] = "PRLI",
102 	[RPORT_ST_RTV] = "RTV",
103 	[RPORT_ST_READY] = "Ready",
104 	[RPORT_ST_ADISC] = "ADISC",
105 	[RPORT_ST_DELETE] = "Delete",
106 };
107 
108 /**
109  * fc_rport_lookup() - Lookup a remote port by port_id
110  * @lport:   The local port to lookup the remote port on
111  * @port_id: The remote port ID to look up
112  *
113  * The reference count of the fc_rport_priv structure is
114  * increased by one.
115  */
116 struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
117 				      u32 port_id)
118 {
119 	struct fc_rport_priv *rdata = NULL, *tmp_rdata;
120 
121 	rcu_read_lock();
122 	list_for_each_entry_rcu(tmp_rdata, &lport->disc.rports, peers)
123 		if (tmp_rdata->ids.port_id == port_id &&
124 		    kref_get_unless_zero(&tmp_rdata->kref)) {
125 			rdata = tmp_rdata;
126 			break;
127 		}
128 	rcu_read_unlock();
129 	return rdata;
130 }
131 EXPORT_SYMBOL(fc_rport_lookup);
132 
133 /**
134  * fc_rport_create() - Create a new remote port
135  * @lport: The local port this remote port will be associated with
136  * @ids:   The identifiers for the new remote port
137  *
138  * The remote port will start in the INIT state.
139  *
140  * Locking note:  must be called with the disc_mutex held.
141  */
142 struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
143 {
144 	struct fc_rport_priv *rdata;
145 
146 	rdata = fc_rport_lookup(lport, port_id);
147 	if (rdata)
148 		return rdata;
149 
150 	rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL);
151 	if (!rdata)
152 		return NULL;
153 
154 	rdata->ids.node_name = -1;
155 	rdata->ids.port_name = -1;
156 	rdata->ids.port_id = port_id;
157 	rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
158 
159 	kref_init(&rdata->kref);
160 	mutex_init(&rdata->rp_mutex);
161 	rdata->local_port = lport;
162 	rdata->rp_state = RPORT_ST_INIT;
163 	rdata->event = RPORT_EV_NONE;
164 	rdata->flags = FC_RP_FLAGS_REC_SUPPORTED;
165 	rdata->e_d_tov = lport->e_d_tov;
166 	rdata->r_a_tov = lport->r_a_tov;
167 	rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
168 	INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
169 	INIT_WORK(&rdata->event_work, fc_rport_work);
170 	if (port_id != FC_FID_DIR_SERV) {
171 		rdata->lld_event_callback = lport->tt.rport_event_callback;
172 		list_add_rcu(&rdata->peers, &lport->disc.rports);
173 	}
174 	return rdata;
175 }
176 EXPORT_SYMBOL(fc_rport_create);
177 
178 /**
179  * fc_rport_destroy() - Free a remote port after last reference is released
180  * @kref: The remote port's kref
181  */
182 void fc_rport_destroy(struct kref *kref)
183 {
184 	struct fc_rport_priv *rdata;
185 
186 	rdata = container_of(kref, struct fc_rport_priv, kref);
187 	kfree_rcu(rdata, rcu);
188 }
189 EXPORT_SYMBOL(fc_rport_destroy);
190 
191 /**
192  * fc_rport_state() - Return a string identifying the remote port's state
193  * @rdata: The remote port
194  */
195 static const char *fc_rport_state(struct fc_rport_priv *rdata)
196 {
197 	const char *cp;
198 
199 	cp = fc_rport_state_names[rdata->rp_state];
200 	if (!cp)
201 		cp = "Unknown";
202 	return cp;
203 }
204 
205 /**
206  * fc_set_rport_loss_tmo() - Set the remote port loss timeout
207  * @rport:   The remote port that gets a new timeout value
208  * @timeout: The new timeout value (in seconds)
209  */
210 void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
211 {
212 	if (timeout)
213 		rport->dev_loss_tmo = timeout;
214 	else
215 		rport->dev_loss_tmo = 1;
216 }
217 EXPORT_SYMBOL(fc_set_rport_loss_tmo);
218 
219 /**
220  * fc_plogi_get_maxframe() - Get the maximum payload from the common service
221  *			     parameters in a FLOGI frame
222  * @flp:    The FLOGI or PLOGI payload
223  * @maxval: The maximum frame size upper limit; this may be less than what
224  *	    is in the service parameters
225  */
226 static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
227 					  unsigned int maxval)
228 {
229 	unsigned int mfs;
230 
231 	/*
232 	 * Get max payload from the common service parameters and the
233 	 * class 3 receive data field size.
234 	 */
235 	mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK;
236 	if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
237 		maxval = mfs;
238 	mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs);
239 	if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
240 		maxval = mfs;
241 	return maxval;
242 }
243 
244 /**
245  * fc_rport_state_enter() - Change the state of a remote port
246  * @rdata: The remote port whose state should change
247  * @new:   The new state
248  *
249  * Locking Note: Called with the rport lock held
250  */
251 static void fc_rport_state_enter(struct fc_rport_priv *rdata,
252 				 enum fc_rport_state new)
253 {
254 	if (rdata->rp_state != new)
255 		rdata->retries = 0;
256 	rdata->rp_state = new;
257 }
258 
259 /**
260  * fc_rport_work() - Handler for remote port events in the rport_event_queue
261  * @work: Handle to the remote port being dequeued
262  *
263  * Reference counting: drops kref on return
264  */
265 static void fc_rport_work(struct work_struct *work)
266 {
267 	u32 port_id;
268 	struct fc_rport_priv *rdata =
269 		container_of(work, struct fc_rport_priv, event_work);
270 	struct fc_rport_libfc_priv *rpriv;
271 	enum fc_rport_event event;
272 	struct fc_lport *lport = rdata->local_port;
273 	struct fc_rport_operations *rport_ops;
274 	struct fc_rport_identifiers ids;
275 	struct fc_rport *rport;
276 	struct fc4_prov *prov;
277 	u8 type;
278 
279 	mutex_lock(&rdata->rp_mutex);
280 	event = rdata->event;
281 	rport_ops = rdata->ops;
282 	rport = rdata->rport;
283 
284 	FC_RPORT_DBG(rdata, "work event %u\n", event);
285 
286 	switch (event) {
287 	case RPORT_EV_READY:
288 		ids = rdata->ids;
289 		rdata->event = RPORT_EV_NONE;
290 		rdata->major_retries = 0;
291 		kref_get(&rdata->kref);
292 		mutex_unlock(&rdata->rp_mutex);
293 
294 		if (!rport) {
295 			FC_RPORT_DBG(rdata, "No rport!\n");
296 			rport = fc_remote_port_add(lport->host, 0, &ids);
297 		}
298 		if (!rport) {
299 			FC_RPORT_DBG(rdata, "Failed to add the rport\n");
300 			fc_rport_logoff(rdata);
301 			kref_put(&rdata->kref, fc_rport_destroy);
302 			return;
303 		}
304 		mutex_lock(&rdata->rp_mutex);
305 		if (rdata->rport)
306 			FC_RPORT_DBG(rdata, "rport already allocated\n");
307 		rdata->rport = rport;
308 		rport->maxframe_size = rdata->maxframe_size;
309 		rport->supported_classes = rdata->supported_classes;
310 
311 		rpriv = rport->dd_data;
312 		rpriv->local_port = lport;
313 		rpriv->rp_state = rdata->rp_state;
314 		rpriv->flags = rdata->flags;
315 		rpriv->e_d_tov = rdata->e_d_tov;
316 		rpriv->r_a_tov = rdata->r_a_tov;
317 		mutex_unlock(&rdata->rp_mutex);
318 
319 		if (rport_ops && rport_ops->event_callback) {
320 			FC_RPORT_DBG(rdata, "callback ev %d\n", event);
321 			rport_ops->event_callback(lport, rdata, event);
322 		}
323 		if (rdata->lld_event_callback) {
324 			FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
325 			rdata->lld_event_callback(lport, rdata, event);
326 		}
327 		kref_put(&rdata->kref, fc_rport_destroy);
328 		break;
329 
330 	case RPORT_EV_FAILED:
331 	case RPORT_EV_LOGO:
332 	case RPORT_EV_STOP:
333 		if (rdata->prli_count) {
334 			mutex_lock(&fc_prov_mutex);
335 			for (type = 1; type < FC_FC4_PROV_SIZE; type++) {
336 				prov = fc_passive_prov[type];
337 				if (prov && prov->prlo)
338 					prov->prlo(rdata);
339 			}
340 			mutex_unlock(&fc_prov_mutex);
341 		}
342 		port_id = rdata->ids.port_id;
343 		mutex_unlock(&rdata->rp_mutex);
344 
345 		if (rport_ops && rport_ops->event_callback) {
346 			FC_RPORT_DBG(rdata, "callback ev %d\n", event);
347 			rport_ops->event_callback(lport, rdata, event);
348 		}
349 		if (rdata->lld_event_callback) {
350 			FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
351 			rdata->lld_event_callback(lport, rdata, event);
352 		}
353 		if (cancel_delayed_work_sync(&rdata->retry_work))
354 			kref_put(&rdata->kref, fc_rport_destroy);
355 
356 		/*
357 		 * Reset any outstanding exchanges before freeing rport.
358 		 */
359 		lport->tt.exch_mgr_reset(lport, 0, port_id);
360 		lport->tt.exch_mgr_reset(lport, port_id, 0);
361 
362 		if (rport) {
363 			rpriv = rport->dd_data;
364 			rpriv->rp_state = RPORT_ST_DELETE;
365 			mutex_lock(&rdata->rp_mutex);
366 			rdata->rport = NULL;
367 			mutex_unlock(&rdata->rp_mutex);
368 			fc_remote_port_delete(rport);
369 		}
370 
371 		mutex_lock(&rdata->rp_mutex);
372 		if (rdata->rp_state == RPORT_ST_DELETE) {
373 			if (port_id == FC_FID_DIR_SERV) {
374 				rdata->event = RPORT_EV_NONE;
375 				mutex_unlock(&rdata->rp_mutex);
376 				kref_put(&rdata->kref, fc_rport_destroy);
377 			} else if ((rdata->flags & FC_RP_STARTED) &&
378 				   rdata->major_retries <
379 				   lport->max_rport_retry_count) {
380 				rdata->major_retries++;
381 				rdata->event = RPORT_EV_NONE;
382 				FC_RPORT_DBG(rdata, "work restart\n");
383 				fc_rport_enter_flogi(rdata);
384 				mutex_unlock(&rdata->rp_mutex);
385 			} else {
386 				FC_RPORT_DBG(rdata, "work delete\n");
387 				mutex_lock(&lport->disc.disc_mutex);
388 				list_del_rcu(&rdata->peers);
389 				mutex_unlock(&lport->disc.disc_mutex);
390 				mutex_unlock(&rdata->rp_mutex);
391 				kref_put(&rdata->kref, fc_rport_destroy);
392 			}
393 		} else {
394 			/*
395 			 * Re-open for events.  Reissue READY event if ready.
396 			 */
397 			rdata->event = RPORT_EV_NONE;
398 			if (rdata->rp_state == RPORT_ST_READY) {
399 				FC_RPORT_DBG(rdata, "work reopen\n");
400 				fc_rport_enter_ready(rdata);
401 			}
402 			mutex_unlock(&rdata->rp_mutex);
403 		}
404 		break;
405 
406 	default:
407 		mutex_unlock(&rdata->rp_mutex);
408 		break;
409 	}
410 	kref_put(&rdata->kref, fc_rport_destroy);
411 }
412 
413 /**
414  * fc_rport_login() - Start the remote port login state machine
415  * @rdata: The remote port to be logged in to
416  *
417  * Initiates the RP state machine. It is called from the LP module.
418  * This function will issue the following commands to the N_Port
419  * identified by the FC ID provided.
420  *
421  * - PLOGI
422  * - PRLI
423  * - RTV
424  *
425  * Locking Note: Called without the rport lock held. This
426  * function will hold the rport lock, call an _enter_*
427  * function and then unlock the rport.
428  *
429  * This indicates the intent to be logged into the remote port.
430  * If it appears we are already logged in, ADISC is used to verify
431  * the setup.
432  */
433 int fc_rport_login(struct fc_rport_priv *rdata)
434 {
435 	mutex_lock(&rdata->rp_mutex);
436 
437 	if (rdata->flags & FC_RP_STARTED) {
438 		FC_RPORT_DBG(rdata, "port already started\n");
439 		mutex_unlock(&rdata->rp_mutex);
440 		return 0;
441 	}
442 
443 	rdata->flags |= FC_RP_STARTED;
444 	switch (rdata->rp_state) {
445 	case RPORT_ST_READY:
446 		FC_RPORT_DBG(rdata, "ADISC port\n");
447 		fc_rport_enter_adisc(rdata);
448 		break;
449 	case RPORT_ST_DELETE:
450 		FC_RPORT_DBG(rdata, "Restart deleted port\n");
451 		break;
452 	case RPORT_ST_INIT:
453 		FC_RPORT_DBG(rdata, "Login to port\n");
454 		fc_rport_enter_flogi(rdata);
455 		break;
456 	default:
457 		FC_RPORT_DBG(rdata, "Login in progress, state %s\n",
458 			     fc_rport_state(rdata));
459 		break;
460 	}
461 	mutex_unlock(&rdata->rp_mutex);
462 
463 	return 0;
464 }
465 EXPORT_SYMBOL(fc_rport_login);
466 
467 /**
468  * fc_rport_enter_delete() - Schedule a remote port to be deleted
469  * @rdata: The remote port to be deleted
470  * @event: The event to report as the reason for deletion
471  *
472  * Locking Note: Called with the rport lock held.
473  *
474  * Allow state change into DELETE only once.
475  *
476  * Call queue_work only if there's no event already pending.
477  * Set the new event so that the old pending event will not occur.
478  * Since we have the mutex, even if fc_rport_work() is already started,
479  * it'll see the new event.
480  *
481  * Reference counting: does not modify kref
482  */
483 static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
484 				  enum fc_rport_event event)
485 {
486 	if (rdata->rp_state == RPORT_ST_DELETE)
487 		return;
488 
489 	FC_RPORT_DBG(rdata, "Delete port\n");
490 
491 	fc_rport_state_enter(rdata, RPORT_ST_DELETE);
492 
493 	kref_get(&rdata->kref);
494 	if (rdata->event == RPORT_EV_NONE &&
495 	    !queue_work(rport_event_queue, &rdata->event_work))
496 		kref_put(&rdata->kref, fc_rport_destroy);
497 
498 	rdata->event = event;
499 }
500 
501 /**
502  * fc_rport_logoff() - Logoff and remove a remote port
503  * @rdata: The remote port to be logged off of
504  *
505  * Locking Note: Called without the rport lock held. This
506  * function will hold the rport lock, call an _enter_*
507  * function and then unlock the rport.
508  */
509 int fc_rport_logoff(struct fc_rport_priv *rdata)
510 {
511 	struct fc_lport *lport = rdata->local_port;
512 	u32 port_id = rdata->ids.port_id;
513 
514 	mutex_lock(&rdata->rp_mutex);
515 
516 	FC_RPORT_DBG(rdata, "Remove port\n");
517 
518 	rdata->flags &= ~FC_RP_STARTED;
519 	if (rdata->rp_state == RPORT_ST_DELETE) {
520 		FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
521 		goto out;
522 	}
523 	/*
524 	 * FC-LS states:
525 	 * To explicitly Logout, the initiating Nx_Port shall terminate
526 	 * other open Sequences that it initiated with the destination
527 	 * Nx_Port prior to performing Logout.
528 	 */
529 	lport->tt.exch_mgr_reset(lport, 0, port_id);
530 	lport->tt.exch_mgr_reset(lport, port_id, 0);
531 
532 	fc_rport_enter_logo(rdata);
533 
534 	/*
535 	 * Change the state to Delete so that we discard
536 	 * the response.
537 	 */
538 	fc_rport_enter_delete(rdata, RPORT_EV_STOP);
539 out:
540 	mutex_unlock(&rdata->rp_mutex);
541 	return 0;
542 }
543 EXPORT_SYMBOL(fc_rport_logoff);
544 
545 /**
546  * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state
547  * @rdata: The remote port that is ready
548  *
549  * Locking Note: The rport lock is expected to be held before calling
550  * this routine.
551  *
552  * Reference counting: schedules workqueue, does not modify kref
553  */
554 static void fc_rport_enter_ready(struct fc_rport_priv *rdata)
555 {
556 	fc_rport_state_enter(rdata, RPORT_ST_READY);
557 
558 	FC_RPORT_DBG(rdata, "Port is Ready\n");
559 
560 	kref_get(&rdata->kref);
561 	if (rdata->event == RPORT_EV_NONE &&
562 	    !queue_work(rport_event_queue, &rdata->event_work))
563 		kref_put(&rdata->kref, fc_rport_destroy);
564 
565 	rdata->event = RPORT_EV_READY;
566 }
567 
568 /**
569  * fc_rport_timeout() - Handler for the retry_work timer
570  * @work: Handle to the remote port that has timed out
571  *
572  * Locking Note: Called without the rport lock held. This
573  * function will hold the rport lock, call an _enter_*
574  * function and then unlock the rport.
575  *
576  * Reference counting: Drops kref on return.
577  */
578 static void fc_rport_timeout(struct work_struct *work)
579 {
580 	struct fc_rport_priv *rdata =
581 		container_of(work, struct fc_rport_priv, retry_work.work);
582 
583 	mutex_lock(&rdata->rp_mutex);
584 	FC_RPORT_DBG(rdata, "Port timeout, state %s\n", fc_rport_state(rdata));
585 
586 	switch (rdata->rp_state) {
587 	case RPORT_ST_FLOGI:
588 		fc_rport_enter_flogi(rdata);
589 		break;
590 	case RPORT_ST_PLOGI:
591 		fc_rport_enter_plogi(rdata);
592 		break;
593 	case RPORT_ST_PRLI:
594 		fc_rport_enter_prli(rdata);
595 		break;
596 	case RPORT_ST_RTV:
597 		fc_rport_enter_rtv(rdata);
598 		break;
599 	case RPORT_ST_ADISC:
600 		fc_rport_enter_adisc(rdata);
601 		break;
602 	case RPORT_ST_PLOGI_WAIT:
603 	case RPORT_ST_READY:
604 	case RPORT_ST_INIT:
605 	case RPORT_ST_DELETE:
606 		break;
607 	}
608 
609 	mutex_unlock(&rdata->rp_mutex);
610 	kref_put(&rdata->kref, fc_rport_destroy);
611 }
612 
613 /**
614  * fc_rport_error() - Error handler, called once retries have been exhausted
615  * @rdata: The remote port the error is happened on
616  * @err:   The error code
617  *
618  * Locking Note: The rport lock is expected to be held before
619  * calling this routine
620  *
621  * Reference counting: does not modify kref
622  */
623 static void fc_rport_error(struct fc_rport_priv *rdata, int err)
624 {
625 	struct fc_lport *lport = rdata->local_port;
626 
627 	FC_RPORT_DBG(rdata, "Error %d in state %s, retries %d\n",
628 		     -err, fc_rport_state(rdata), rdata->retries);
629 
630 	switch (rdata->rp_state) {
631 	case RPORT_ST_FLOGI:
632 		rdata->flags &= ~FC_RP_STARTED;
633 		fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
634 		break;
635 	case RPORT_ST_PLOGI:
636 		if (lport->point_to_multipoint) {
637 			rdata->flags &= ~FC_RP_STARTED;
638 			fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
639 		} else
640 			fc_rport_enter_logo(rdata);
641 		break;
642 	case RPORT_ST_RTV:
643 		fc_rport_enter_ready(rdata);
644 		break;
645 	case RPORT_ST_PRLI:
646 	case RPORT_ST_ADISC:
647 		fc_rport_enter_logo(rdata);
648 		break;
649 	case RPORT_ST_PLOGI_WAIT:
650 	case RPORT_ST_DELETE:
651 	case RPORT_ST_READY:
652 	case RPORT_ST_INIT:
653 		break;
654 	}
655 }
656 
657 /**
658  * fc_rport_error_retry() - Handler for remote port state retries
659  * @rdata: The remote port whose state is to be retried
660  * @err:   The error code
661  *
662  * If the error was an exchange timeout retry immediately,
663  * otherwise wait for E_D_TOV.
664  *
665  * Locking Note: The rport lock is expected to be held before
666  * calling this routine
667  *
668  * Reference counting: increments kref when scheduling retry_work
669  */
670 static void fc_rport_error_retry(struct fc_rport_priv *rdata, int err)
671 {
672 	unsigned long delay = msecs_to_jiffies(rdata->e_d_tov);
673 
674 	/* make sure this isn't an FC_EX_CLOSED error, never retry those */
675 	if (err == -FC_EX_CLOSED)
676 		goto out;
677 
678 	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
679 		FC_RPORT_DBG(rdata, "Error %d in state %s, retrying\n",
680 			     err, fc_rport_state(rdata));
681 		rdata->retries++;
682 		/* no additional delay on exchange timeouts */
683 		if (err == -FC_EX_TIMEOUT)
684 			delay = 0;
685 		kref_get(&rdata->kref);
686 		if (!schedule_delayed_work(&rdata->retry_work, delay))
687 			kref_put(&rdata->kref, fc_rport_destroy);
688 		return;
689 	}
690 
691 out:
692 	fc_rport_error(rdata, err);
693 }
694 
695 /**
696  * fc_rport_login_complete() - Handle parameters and completion of p-mp login.
697  * @rdata:  The remote port which we logged into or which logged into us.
698  * @fp:     The FLOGI or PLOGI request or response frame
699  *
700  * Returns non-zero error if a problem is detected with the frame.
701  * Does not free the frame.
702  *
703  * This is only used in point-to-multipoint mode for FIP currently.
704  */
705 static int fc_rport_login_complete(struct fc_rport_priv *rdata,
706 				   struct fc_frame *fp)
707 {
708 	struct fc_lport *lport = rdata->local_port;
709 	struct fc_els_flogi *flogi;
710 	unsigned int e_d_tov;
711 	u16 csp_flags;
712 
713 	flogi = fc_frame_payload_get(fp, sizeof(*flogi));
714 	if (!flogi)
715 		return -EINVAL;
716 
717 	csp_flags = ntohs(flogi->fl_csp.sp_features);
718 
719 	if (fc_frame_payload_op(fp) == ELS_FLOGI) {
720 		if (csp_flags & FC_SP_FT_FPORT) {
721 			FC_RPORT_DBG(rdata, "Fabric bit set in FLOGI\n");
722 			return -EINVAL;
723 		}
724 	} else {
725 
726 		/*
727 		 * E_D_TOV is not valid on an incoming FLOGI request.
728 		 */
729 		e_d_tov = ntohl(flogi->fl_csp.sp_e_d_tov);
730 		if (csp_flags & FC_SP_FT_EDTR)
731 			e_d_tov /= 1000000;
732 		if (e_d_tov > rdata->e_d_tov)
733 			rdata->e_d_tov = e_d_tov;
734 	}
735 	rdata->maxframe_size = fc_plogi_get_maxframe(flogi, lport->mfs);
736 	return 0;
737 }
738 
739 /**
740  * fc_rport_flogi_resp() - Handle response to FLOGI request for p-mp mode
741  * @sp:	    The sequence that the FLOGI was on
742  * @fp:	    The FLOGI response frame
743  * @rp_arg: The remote port that received the FLOGI response
744  */
745 static void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
746 				void *rp_arg)
747 {
748 	struct fc_rport_priv *rdata = rp_arg;
749 	struct fc_lport *lport = rdata->local_port;
750 	struct fc_els_flogi *flogi;
751 	unsigned int r_a_tov;
752 	u8 opcode;
753 	int err = 0;
754 
755 	FC_RPORT_DBG(rdata, "Received a FLOGI %s\n",
756 		     IS_ERR(fp) ? "error" : fc_els_resp_type(fp));
757 
758 	if (fp == ERR_PTR(-FC_EX_CLOSED))
759 		goto put;
760 
761 	mutex_lock(&rdata->rp_mutex);
762 
763 	if (rdata->rp_state != RPORT_ST_FLOGI) {
764 		FC_RPORT_DBG(rdata, "Received a FLOGI response, but in state "
765 			     "%s\n", fc_rport_state(rdata));
766 		if (IS_ERR(fp))
767 			goto err;
768 		goto out;
769 	}
770 
771 	if (IS_ERR(fp)) {
772 		fc_rport_error(rdata, PTR_ERR(fp));
773 		goto err;
774 	}
775 	opcode = fc_frame_payload_op(fp);
776 	if (opcode == ELS_LS_RJT) {
777 		struct fc_els_ls_rjt *rjt;
778 
779 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
780 		FC_RPORT_DBG(rdata, "FLOGI ELS rejected, reason %x expl %x\n",
781 			     rjt->er_reason, rjt->er_explan);
782 		err = -FC_EX_ELS_RJT;
783 		goto bad;
784 	} else if (opcode != ELS_LS_ACC) {
785 		FC_RPORT_DBG(rdata, "FLOGI ELS invalid opcode %x\n", opcode);
786 		err = -FC_EX_ELS_RJT;
787 		goto bad;
788 	}
789 	if (fc_rport_login_complete(rdata, fp)) {
790 		FC_RPORT_DBG(rdata, "FLOGI failed, no login\n");
791 		err = -FC_EX_INV_LOGIN;
792 		goto bad;
793 	}
794 
795 	flogi = fc_frame_payload_get(fp, sizeof(*flogi));
796 	if (!flogi) {
797 		err = -FC_EX_ALLOC_ERR;
798 		goto bad;
799 	}
800 	r_a_tov = ntohl(flogi->fl_csp.sp_r_a_tov);
801 	if (r_a_tov > rdata->r_a_tov)
802 		rdata->r_a_tov = r_a_tov;
803 
804 	if (rdata->ids.port_name < lport->wwpn)
805 		fc_rport_enter_plogi(rdata);
806 	else
807 		fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
808 out:
809 	fc_frame_free(fp);
810 err:
811 	mutex_unlock(&rdata->rp_mutex);
812 put:
813 	kref_put(&rdata->kref, fc_rport_destroy);
814 	return;
815 bad:
816 	FC_RPORT_DBG(rdata, "Bad FLOGI response\n");
817 	fc_rport_error_retry(rdata, err);
818 	goto out;
819 }
820 
821 /**
822  * fc_rport_enter_flogi() - Send a FLOGI request to the remote port for p-mp
823  * @rdata: The remote port to send a FLOGI to
824  *
825  * Locking Note: The rport lock is expected to be held before calling
826  * this routine.
827  *
828  * Reference counting: increments kref when sending ELS
829  */
830 static void fc_rport_enter_flogi(struct fc_rport_priv *rdata)
831 {
832 	struct fc_lport *lport = rdata->local_port;
833 	struct fc_frame *fp;
834 
835 	if (!lport->point_to_multipoint)
836 		return fc_rport_enter_plogi(rdata);
837 
838 	FC_RPORT_DBG(rdata, "Entered FLOGI state from %s state\n",
839 		     fc_rport_state(rdata));
840 
841 	fc_rport_state_enter(rdata, RPORT_ST_FLOGI);
842 
843 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
844 	if (!fp)
845 		return fc_rport_error_retry(rdata, -FC_EX_ALLOC_ERR);
846 
847 	kref_get(&rdata->kref);
848 	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_FLOGI,
849 				  fc_rport_flogi_resp, rdata,
850 				  2 * lport->r_a_tov)) {
851 		fc_rport_error_retry(rdata, -FC_EX_XMIT_ERR);
852 		kref_put(&rdata->kref, fc_rport_destroy);
853 	}
854 }
855 
856 /**
857  * fc_rport_recv_flogi_req() - Handle Fabric Login (FLOGI) request in p-mp mode
858  * @lport: The local port that received the PLOGI request
859  * @rx_fp: The PLOGI request frame
860  *
861  * Reference counting: drops kref on return
862  */
863 static void fc_rport_recv_flogi_req(struct fc_lport *lport,
864 				    struct fc_frame *rx_fp)
865 {
866 	struct fc_disc *disc;
867 	struct fc_els_flogi *flp;
868 	struct fc_rport_priv *rdata;
869 	struct fc_frame *fp = rx_fp;
870 	struct fc_seq_els_data rjt_data;
871 	u32 sid;
872 
873 	sid = fc_frame_sid(fp);
874 
875 	FC_RPORT_ID_DBG(lport, sid, "Received FLOGI request\n");
876 
877 	disc = &lport->disc;
878 	if (!lport->point_to_multipoint) {
879 		rjt_data.reason = ELS_RJT_UNSUP;
880 		rjt_data.explan = ELS_EXPL_NONE;
881 		goto reject;
882 	}
883 
884 	flp = fc_frame_payload_get(fp, sizeof(*flp));
885 	if (!flp) {
886 		rjt_data.reason = ELS_RJT_LOGIC;
887 		rjt_data.explan = ELS_EXPL_INV_LEN;
888 		goto reject;
889 	}
890 
891 	rdata = fc_rport_lookup(lport, sid);
892 	if (!rdata) {
893 		rjt_data.reason = ELS_RJT_FIP;
894 		rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
895 		goto reject;
896 	}
897 	mutex_lock(&rdata->rp_mutex);
898 
899 	FC_RPORT_DBG(rdata, "Received FLOGI in %s state\n",
900 		     fc_rport_state(rdata));
901 
902 	switch (rdata->rp_state) {
903 	case RPORT_ST_INIT:
904 		/*
905 		 * If received the FLOGI request on RPORT which is INIT state
906 		 * (means not transition to FLOGI either fc_rport timeout
907 		 * function didn;t trigger or this end hasn;t received
908 		 * beacon yet from other end. In that case only, allow RPORT
909 		 * state machine to continue, otherwise fall through which
910 		 * causes the code to send reject response.
911 		 * NOTE; Not checking for FIP->state such as VNMP_UP or
912 		 * VNMP_CLAIM because if FIP state is not one of those,
913 		 * RPORT wouldn;t have created and 'rport_lookup' would have
914 		 * failed anyway in that case.
915 		 */
916 		break;
917 	case RPORT_ST_DELETE:
918 		mutex_unlock(&rdata->rp_mutex);
919 		rjt_data.reason = ELS_RJT_FIP;
920 		rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR;
921 		goto reject_put;
922 	case RPORT_ST_FLOGI:
923 	case RPORT_ST_PLOGI_WAIT:
924 	case RPORT_ST_PLOGI:
925 		break;
926 	case RPORT_ST_PRLI:
927 	case RPORT_ST_RTV:
928 	case RPORT_ST_READY:
929 	case RPORT_ST_ADISC:
930 		/*
931 		 * Set the remote port to be deleted and to then restart.
932 		 * This queues work to be sure exchanges are reset.
933 		 */
934 		fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
935 		mutex_unlock(&rdata->rp_mutex);
936 		rjt_data.reason = ELS_RJT_BUSY;
937 		rjt_data.explan = ELS_EXPL_NONE;
938 		goto reject_put;
939 	}
940 	if (fc_rport_login_complete(rdata, fp)) {
941 		mutex_unlock(&rdata->rp_mutex);
942 		rjt_data.reason = ELS_RJT_LOGIC;
943 		rjt_data.explan = ELS_EXPL_NONE;
944 		goto reject_put;
945 	}
946 
947 	fp = fc_frame_alloc(lport, sizeof(*flp));
948 	if (!fp)
949 		goto out;
950 
951 	fc_flogi_fill(lport, fp);
952 	flp = fc_frame_payload_get(fp, sizeof(*flp));
953 	flp->fl_cmd = ELS_LS_ACC;
954 
955 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
956 	lport->tt.frame_send(lport, fp);
957 
958 	/*
959 	 * Do not proceed with the state machine if our
960 	 * FLOGI has crossed with an FLOGI from the
961 	 * remote port; wait for the FLOGI response instead.
962 	 */
963 	if (rdata->rp_state != RPORT_ST_FLOGI) {
964 		if (rdata->ids.port_name < lport->wwpn)
965 			fc_rport_enter_plogi(rdata);
966 		else
967 			fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
968 	}
969 out:
970 	mutex_unlock(&rdata->rp_mutex);
971 	kref_put(&rdata->kref, fc_rport_destroy);
972 	fc_frame_free(rx_fp);
973 	return;
974 
975 reject_put:
976 	kref_put(&rdata->kref, fc_rport_destroy);
977 reject:
978 	fc_seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
979 	fc_frame_free(rx_fp);
980 }
981 
982 /**
983  * fc_rport_plogi_resp() - Handler for ELS PLOGI responses
984  * @sp:	       The sequence the PLOGI is on
985  * @fp:	       The PLOGI response frame
986  * @rdata_arg: The remote port that sent the PLOGI response
987  *
988  * Locking Note: This function will be called without the rport lock
989  * held, but it will lock, call an _enter_* function or fc_rport_error
990  * and then unlock the rport.
991  */
992 static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
993 				void *rdata_arg)
994 {
995 	struct fc_rport_priv *rdata = rdata_arg;
996 	struct fc_lport *lport = rdata->local_port;
997 	struct fc_els_flogi *plp = NULL;
998 	u16 csp_seq;
999 	u16 cssp_seq;
1000 	u8 op;
1001 
1002 	FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp));
1003 
1004 	if (fp == ERR_PTR(-FC_EX_CLOSED))
1005 		goto put;
1006 
1007 	mutex_lock(&rdata->rp_mutex);
1008 
1009 	if (rdata->rp_state != RPORT_ST_PLOGI) {
1010 		FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state "
1011 			     "%s\n", fc_rport_state(rdata));
1012 		if (IS_ERR(fp))
1013 			goto err;
1014 		goto out;
1015 	}
1016 
1017 	if (IS_ERR(fp)) {
1018 		fc_rport_error_retry(rdata, PTR_ERR(fp));
1019 		goto err;
1020 	}
1021 
1022 	op = fc_frame_payload_op(fp);
1023 	if (op == ELS_LS_ACC &&
1024 	    (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
1025 		rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
1026 		rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
1027 
1028 		/* save plogi response sp_features for further reference */
1029 		rdata->sp_features = ntohs(plp->fl_csp.sp_features);
1030 
1031 		if (lport->point_to_multipoint)
1032 			fc_rport_login_complete(rdata, fp);
1033 		csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
1034 		cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq);
1035 		if (cssp_seq < csp_seq)
1036 			csp_seq = cssp_seq;
1037 		rdata->max_seq = csp_seq;
1038 		rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs);
1039 		fc_rport_enter_prli(rdata);
1040 	} else {
1041 		struct fc_els_ls_rjt *rjt;
1042 
1043 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1044 		FC_RPORT_DBG(rdata, "PLOGI ELS rejected, reason %x expl %x\n",
1045 			     rjt->er_reason, rjt->er_explan);
1046 		fc_rport_error_retry(rdata, -FC_EX_ELS_RJT);
1047 	}
1048 out:
1049 	fc_frame_free(fp);
1050 err:
1051 	mutex_unlock(&rdata->rp_mutex);
1052 put:
1053 	kref_put(&rdata->kref, fc_rport_destroy);
1054 }
1055 
1056 static bool
1057 fc_rport_compatible_roles(struct fc_lport *lport, struct fc_rport_priv *rdata)
1058 {
1059 	if (rdata->ids.roles == FC_PORT_ROLE_UNKNOWN)
1060 		return true;
1061 	if ((rdata->ids.roles & FC_PORT_ROLE_FCP_TARGET) &&
1062 	    (lport->service_params & FCP_SPPF_INIT_FCN))
1063 		return true;
1064 	if ((rdata->ids.roles & FC_PORT_ROLE_FCP_INITIATOR) &&
1065 	    (lport->service_params & FCP_SPPF_TARG_FCN))
1066 		return true;
1067 	return false;
1068 }
1069 
1070 /**
1071  * fc_rport_enter_plogi() - Send Port Login (PLOGI) request
1072  * @rdata: The remote port to send a PLOGI to
1073  *
1074  * Locking Note: The rport lock is expected to be held before calling
1075  * this routine.
1076  *
1077  * Reference counting: increments kref when sending ELS
1078  */
1079 static void fc_rport_enter_plogi(struct fc_rport_priv *rdata)
1080 {
1081 	struct fc_lport *lport = rdata->local_port;
1082 	struct fc_frame *fp;
1083 
1084 	if (!fc_rport_compatible_roles(lport, rdata)) {
1085 		FC_RPORT_DBG(rdata, "PLOGI suppressed for incompatible role\n");
1086 		fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT);
1087 		return;
1088 	}
1089 
1090 	FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
1091 		     fc_rport_state(rdata));
1092 
1093 	fc_rport_state_enter(rdata, RPORT_ST_PLOGI);
1094 
1095 	rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
1096 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
1097 	if (!fp) {
1098 		FC_RPORT_DBG(rdata, "%s frame alloc failed\n", __func__);
1099 		fc_rport_error_retry(rdata, -FC_EX_ALLOC_ERR);
1100 		return;
1101 	}
1102 	rdata->e_d_tov = lport->e_d_tov;
1103 
1104 	kref_get(&rdata->kref);
1105 	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
1106 				  fc_rport_plogi_resp, rdata,
1107 				  2 * lport->r_a_tov)) {
1108 		fc_rport_error_retry(rdata, -FC_EX_XMIT_ERR);
1109 		kref_put(&rdata->kref, fc_rport_destroy);
1110 	}
1111 }
1112 
1113 /**
1114  * fc_rport_prli_resp() - Process Login (PRLI) response handler
1115  * @sp:	       The sequence the PRLI response was on
1116  * @fp:	       The PRLI response frame
1117  * @rdata_arg: The remote port that sent the PRLI response
1118  *
1119  * Locking Note: This function will be called without the rport lock
1120  * held, but it will lock, call an _enter_* function or fc_rport_error
1121  * and then unlock the rport.
1122  */
1123 static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
1124 			       void *rdata_arg)
1125 {
1126 	struct fc_rport_priv *rdata = rdata_arg;
1127 	struct {
1128 		struct fc_els_prli prli;
1129 		struct fc_els_spp spp;
1130 	} *pp;
1131 	struct fc_els_spp temp_spp;
1132 	struct fc_els_ls_rjt *rjt;
1133 	struct fc4_prov *prov;
1134 	u32 roles = FC_RPORT_ROLE_UNKNOWN;
1135 	u32 fcp_parm = 0;
1136 	u8 op;
1137 	enum fc_els_spp_resp resp_code;
1138 
1139 	FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp));
1140 
1141 	if (fp == ERR_PTR(-FC_EX_CLOSED))
1142 		goto put;
1143 
1144 	mutex_lock(&rdata->rp_mutex);
1145 
1146 	if (rdata->rp_state != RPORT_ST_PRLI) {
1147 		FC_RPORT_DBG(rdata, "Received a PRLI response, but in state "
1148 			     "%s\n", fc_rport_state(rdata));
1149 		if (IS_ERR(fp))
1150 			goto err;
1151 		goto out;
1152 	}
1153 
1154 	if (IS_ERR(fp)) {
1155 		fc_rport_error_retry(rdata, PTR_ERR(fp));
1156 		goto err;
1157 	}
1158 
1159 	/* reinitialize remote port roles */
1160 	rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1161 
1162 	op = fc_frame_payload_op(fp);
1163 	if (op == ELS_LS_ACC) {
1164 		pp = fc_frame_payload_get(fp, sizeof(*pp));
1165 		if (!pp)
1166 			goto out;
1167 
1168 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
1169 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x spp_type 0x%x\n",
1170 			     pp->spp.spp_flags, pp->spp.spp_type);
1171 		rdata->spp_type = pp->spp.spp_type;
1172 		if (resp_code != FC_SPP_RESP_ACK) {
1173 			if (resp_code == FC_SPP_RESP_CONF)
1174 				fc_rport_error(rdata, -FC_EX_SEQ_ERR);
1175 			else
1176 				fc_rport_error_retry(rdata, -FC_EX_SEQ_ERR);
1177 			goto out;
1178 		}
1179 		if (pp->prli.prli_spp_len < sizeof(pp->spp))
1180 			goto out;
1181 
1182 		fcp_parm = ntohl(pp->spp.spp_params);
1183 		if (fcp_parm & FCP_SPPF_RETRY)
1184 			rdata->flags |= FC_RP_FLAGS_RETRY;
1185 		if (fcp_parm & FCP_SPPF_CONF_COMPL)
1186 			rdata->flags |= FC_RP_FLAGS_CONF_REQ;
1187 
1188 		/*
1189 		 * Call prli provider if we should act as a target
1190 		 */
1191 		prov = fc_passive_prov[rdata->spp_type];
1192 		if (prov) {
1193 			memset(&temp_spp, 0, sizeof(temp_spp));
1194 			prov->prli(rdata, pp->prli.prli_spp_len,
1195 				   &pp->spp, &temp_spp);
1196 		}
1197 		/*
1198 		 * Check if the image pair could be established
1199 		 */
1200 		if (rdata->spp_type != FC_TYPE_FCP ||
1201 		    !(pp->spp.spp_flags & FC_SPP_EST_IMG_PAIR)) {
1202 			/*
1203 			 * Nope; we can't use this port as a target.
1204 			 */
1205 			fcp_parm &= ~FCP_SPPF_TARG_FCN;
1206 		}
1207 		rdata->supported_classes = FC_COS_CLASS3;
1208 		if (fcp_parm & FCP_SPPF_INIT_FCN)
1209 			roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1210 		if (fcp_parm & FCP_SPPF_TARG_FCN)
1211 			roles |= FC_RPORT_ROLE_FCP_TARGET;
1212 
1213 		rdata->ids.roles = roles;
1214 		fc_rport_enter_rtv(rdata);
1215 
1216 	} else {
1217 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1218 		FC_RPORT_DBG(rdata, "PRLI ELS rejected, reason %x expl %x\n",
1219 			     rjt->er_reason, rjt->er_explan);
1220 		fc_rport_error_retry(rdata, FC_EX_ELS_RJT);
1221 	}
1222 
1223 out:
1224 	fc_frame_free(fp);
1225 err:
1226 	mutex_unlock(&rdata->rp_mutex);
1227 put:
1228 	kref_put(&rdata->kref, fc_rport_destroy);
1229 }
1230 
1231 /**
1232  * fc_rport_enter_prli() - Send Process Login (PRLI) request
1233  * @rdata: The remote port to send the PRLI request to
1234  *
1235  * Locking Note: The rport lock is expected to be held before calling
1236  * this routine.
1237  *
1238  * Reference counting: increments kref when sending ELS
1239  */
1240 static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
1241 {
1242 	struct fc_lport *lport = rdata->local_port;
1243 	struct {
1244 		struct fc_els_prli prli;
1245 		struct fc_els_spp spp;
1246 	} *pp;
1247 	struct fc_frame *fp;
1248 	struct fc4_prov *prov;
1249 
1250 	/*
1251 	 * If the rport is one of the well known addresses
1252 	 * we skip PRLI and RTV and go straight to READY.
1253 	 */
1254 	if (rdata->ids.port_id >= FC_FID_DOM_MGR) {
1255 		fc_rport_enter_ready(rdata);
1256 		return;
1257 	}
1258 
1259 	/*
1260 	 * And if the local port does not support the initiator function
1261 	 * there's no need to send a PRLI, either.
1262 	 */
1263 	if (!(lport->service_params & FCP_SPPF_INIT_FCN)) {
1264 		    fc_rport_enter_ready(rdata);
1265 		    return;
1266 	}
1267 
1268 	FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n",
1269 		     fc_rport_state(rdata));
1270 
1271 	fc_rport_state_enter(rdata, RPORT_ST_PRLI);
1272 
1273 	fp = fc_frame_alloc(lport, sizeof(*pp));
1274 	if (!fp) {
1275 		fc_rport_error_retry(rdata, -FC_EX_ALLOC_ERR);
1276 		return;
1277 	}
1278 
1279 	fc_prli_fill(lport, fp);
1280 
1281 	prov = fc_passive_prov[FC_TYPE_FCP];
1282 	if (prov) {
1283 		pp = fc_frame_payload_get(fp, sizeof(*pp));
1284 		prov->prli(rdata, sizeof(pp->spp), NULL, &pp->spp);
1285 	}
1286 
1287 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rdata->ids.port_id,
1288 		       fc_host_port_id(lport->host), FC_TYPE_ELS,
1289 		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1290 
1291 	kref_get(&rdata->kref);
1292 	if (!fc_exch_seq_send(lport, fp, fc_rport_prli_resp,
1293 			      NULL, rdata, 2 * lport->r_a_tov)) {
1294 		fc_rport_error_retry(rdata, -FC_EX_XMIT_ERR);
1295 		kref_put(&rdata->kref, fc_rport_destroy);
1296 	}
1297 }
1298 
1299 /**
1300  * fc_rport_rtv_resp() - Handler for Request Timeout Value (RTV) responses
1301  * @sp:	       The sequence the RTV was on
1302  * @fp:	       The RTV response frame
1303  * @rdata_arg: The remote port that sent the RTV response
1304  *
1305  * Many targets don't seem to support this.
1306  *
1307  * Locking Note: This function will be called without the rport lock
1308  * held, but it will lock, call an _enter_* function or fc_rport_error
1309  * and then unlock the rport.
1310  */
1311 static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
1312 			      void *rdata_arg)
1313 {
1314 	struct fc_rport_priv *rdata = rdata_arg;
1315 	u8 op;
1316 
1317 	FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp));
1318 
1319 	if (fp == ERR_PTR(-FC_EX_CLOSED))
1320 		goto put;
1321 
1322 	mutex_lock(&rdata->rp_mutex);
1323 
1324 	if (rdata->rp_state != RPORT_ST_RTV) {
1325 		FC_RPORT_DBG(rdata, "Received a RTV response, but in state "
1326 			     "%s\n", fc_rport_state(rdata));
1327 		if (IS_ERR(fp))
1328 			goto err;
1329 		goto out;
1330 	}
1331 
1332 	if (IS_ERR(fp)) {
1333 		fc_rport_error(rdata, PTR_ERR(fp));
1334 		goto err;
1335 	}
1336 
1337 	op = fc_frame_payload_op(fp);
1338 	if (op == ELS_LS_ACC) {
1339 		struct fc_els_rtv_acc *rtv;
1340 		u32 toq;
1341 		u32 tov;
1342 
1343 		rtv = fc_frame_payload_get(fp, sizeof(*rtv));
1344 		if (rtv) {
1345 			toq = ntohl(rtv->rtv_toq);
1346 			tov = ntohl(rtv->rtv_r_a_tov);
1347 			if (tov == 0)
1348 				tov = 1;
1349 			if (tov > rdata->r_a_tov)
1350 				rdata->r_a_tov = tov;
1351 			tov = ntohl(rtv->rtv_e_d_tov);
1352 			if (toq & FC_ELS_RTV_EDRES)
1353 				tov /= 1000000;
1354 			if (tov == 0)
1355 				tov = 1;
1356 			if (tov > rdata->e_d_tov)
1357 				rdata->e_d_tov = tov;
1358 		}
1359 	}
1360 
1361 	fc_rport_enter_ready(rdata);
1362 
1363 out:
1364 	fc_frame_free(fp);
1365 err:
1366 	mutex_unlock(&rdata->rp_mutex);
1367 put:
1368 	kref_put(&rdata->kref, fc_rport_destroy);
1369 }
1370 
1371 /**
1372  * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request
1373  * @rdata: The remote port to send the RTV request to
1374  *
1375  * Locking Note: The rport lock is expected to be held before calling
1376  * this routine.
1377  *
1378  * Reference counting: increments kref when sending ELS
1379  */
1380 static void fc_rport_enter_rtv(struct fc_rport_priv *rdata)
1381 {
1382 	struct fc_frame *fp;
1383 	struct fc_lport *lport = rdata->local_port;
1384 
1385 	FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n",
1386 		     fc_rport_state(rdata));
1387 
1388 	fc_rport_state_enter(rdata, RPORT_ST_RTV);
1389 
1390 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
1391 	if (!fp) {
1392 		fc_rport_error_retry(rdata, -FC_EX_ALLOC_ERR);
1393 		return;
1394 	}
1395 
1396 	kref_get(&rdata->kref);
1397 	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
1398 				  fc_rport_rtv_resp, rdata,
1399 				  2 * lport->r_a_tov)) {
1400 		fc_rport_error_retry(rdata, -FC_EX_XMIT_ERR);
1401 		kref_put(&rdata->kref, fc_rport_destroy);
1402 	}
1403 }
1404 
1405 /**
1406  * fc_rport_recv_rtv_req() - Handler for Read Timeout Value (RTV) requests
1407  * @rdata: The remote port that sent the RTV request
1408  * @in_fp: The RTV request frame
1409  *
1410  * Locking Note:  Called with the lport and rport locks held.
1411  */
1412 static void fc_rport_recv_rtv_req(struct fc_rport_priv *rdata,
1413 				  struct fc_frame *in_fp)
1414 {
1415 	struct fc_lport *lport = rdata->local_port;
1416 	struct fc_frame *fp;
1417 	struct fc_els_rtv_acc *rtv;
1418 	struct fc_seq_els_data rjt_data;
1419 
1420 	FC_RPORT_DBG(rdata, "Received RTV request\n");
1421 
1422 	fp = fc_frame_alloc(lport, sizeof(*rtv));
1423 	if (!fp) {
1424 		rjt_data.reason = ELS_RJT_UNAB;
1425 		rjt_data.explan = ELS_EXPL_INSUF_RES;
1426 		fc_seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
1427 		goto drop;
1428 	}
1429 	rtv = fc_frame_payload_get(fp, sizeof(*rtv));
1430 	rtv->rtv_cmd = ELS_LS_ACC;
1431 	rtv->rtv_r_a_tov = htonl(lport->r_a_tov);
1432 	rtv->rtv_e_d_tov = htonl(lport->e_d_tov);
1433 	rtv->rtv_toq = 0;
1434 	fc_fill_reply_hdr(fp, in_fp, FC_RCTL_ELS_REP, 0);
1435 	lport->tt.frame_send(lport, fp);
1436 drop:
1437 	fc_frame_free(in_fp);
1438 }
1439 
1440 /**
1441  * fc_rport_logo_resp() - Handler for logout (LOGO) responses
1442  * @sp:	       The sequence the LOGO was on
1443  * @fp:	       The LOGO response frame
1444  * @lport_arg: The local port
1445  */
1446 static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
1447 			       void *rdata_arg)
1448 {
1449 	struct fc_rport_priv *rdata = rdata_arg;
1450 	struct fc_lport *lport = rdata->local_port;
1451 
1452 	FC_RPORT_ID_DBG(lport, fc_seq_exch(sp)->did,
1453 			"Received a LOGO %s\n", fc_els_resp_type(fp));
1454 	if (!IS_ERR(fp))
1455 		fc_frame_free(fp);
1456 	kref_put(&rdata->kref, fc_rport_destroy);
1457 }
1458 
1459 /**
1460  * fc_rport_enter_logo() - Send a logout (LOGO) request
1461  * @rdata: The remote port to send the LOGO request to
1462  *
1463  * Locking Note: The rport lock is expected to be held before calling
1464  * this routine.
1465  *
1466  * Reference counting: increments kref when sending ELS
1467  */
1468 static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
1469 {
1470 	struct fc_lport *lport = rdata->local_port;
1471 	struct fc_frame *fp;
1472 
1473 	FC_RPORT_DBG(rdata, "Port sending LOGO from %s state\n",
1474 		     fc_rport_state(rdata));
1475 
1476 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
1477 	if (!fp)
1478 		return;
1479 	kref_get(&rdata->kref);
1480 	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
1481 				  fc_rport_logo_resp, rdata, 0))
1482 		kref_put(&rdata->kref, fc_rport_destroy);
1483 }
1484 
1485 /**
1486  * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses
1487  * @sp:	       The sequence the ADISC response was on
1488  * @fp:	       The ADISC response frame
1489  * @rdata_arg: The remote port that sent the ADISC response
1490  *
1491  * Locking Note: This function will be called without the rport lock
1492  * held, but it will lock, call an _enter_* function or fc_rport_error
1493  * and then unlock the rport.
1494  */
1495 static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
1496 				void *rdata_arg)
1497 {
1498 	struct fc_rport_priv *rdata = rdata_arg;
1499 	struct fc_els_adisc *adisc;
1500 	u8 op;
1501 
1502 	FC_RPORT_DBG(rdata, "Received a ADISC response\n");
1503 
1504 	if (fp == ERR_PTR(-FC_EX_CLOSED))
1505 		goto put;
1506 
1507 	mutex_lock(&rdata->rp_mutex);
1508 
1509 	if (rdata->rp_state != RPORT_ST_ADISC) {
1510 		FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
1511 			     fc_rport_state(rdata));
1512 		if (IS_ERR(fp))
1513 			goto err;
1514 		goto out;
1515 	}
1516 
1517 	if (IS_ERR(fp)) {
1518 		fc_rport_error(rdata, PTR_ERR(fp));
1519 		goto err;
1520 	}
1521 
1522 	/*
1523 	 * If address verification failed.  Consider us logged out of the rport.
1524 	 * Since the rport is still in discovery, we want to be
1525 	 * logged in, so go to PLOGI state.  Otherwise, go back to READY.
1526 	 */
1527 	op = fc_frame_payload_op(fp);
1528 	adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1529 	if (op != ELS_LS_ACC || !adisc ||
1530 	    ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
1531 	    get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
1532 	    get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
1533 		FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
1534 		fc_rport_enter_flogi(rdata);
1535 	} else {
1536 		FC_RPORT_DBG(rdata, "ADISC OK\n");
1537 		fc_rport_enter_ready(rdata);
1538 	}
1539 out:
1540 	fc_frame_free(fp);
1541 err:
1542 	mutex_unlock(&rdata->rp_mutex);
1543 put:
1544 	kref_put(&rdata->kref, fc_rport_destroy);
1545 }
1546 
1547 /**
1548  * fc_rport_enter_adisc() - Send Address Discover (ADISC) request
1549  * @rdata: The remote port to send the ADISC request to
1550  *
1551  * Locking Note: The rport lock is expected to be held before calling
1552  * this routine.
1553  *
1554  * Reference counting: increments kref when sending ELS
1555  */
1556 static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
1557 {
1558 	struct fc_lport *lport = rdata->local_port;
1559 	struct fc_frame *fp;
1560 
1561 	FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
1562 		     fc_rport_state(rdata));
1563 
1564 	fc_rport_state_enter(rdata, RPORT_ST_ADISC);
1565 
1566 	fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
1567 	if (!fp) {
1568 		fc_rport_error_retry(rdata, -FC_EX_ALLOC_ERR);
1569 		return;
1570 	}
1571 	kref_get(&rdata->kref);
1572 	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
1573 				  fc_rport_adisc_resp, rdata,
1574 				  2 * lport->r_a_tov)) {
1575 		fc_rport_error_retry(rdata, -FC_EX_XMIT_ERR);
1576 		kref_put(&rdata->kref, fc_rport_destroy);
1577 	}
1578 }
1579 
1580 /**
1581  * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests
1582  * @rdata: The remote port that sent the ADISC request
1583  * @in_fp: The ADISC request frame
1584  *
1585  * Locking Note:  Called with the lport and rport locks held.
1586  */
1587 static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
1588 				    struct fc_frame *in_fp)
1589 {
1590 	struct fc_lport *lport = rdata->local_port;
1591 	struct fc_frame *fp;
1592 	struct fc_els_adisc *adisc;
1593 	struct fc_seq_els_data rjt_data;
1594 
1595 	FC_RPORT_DBG(rdata, "Received ADISC request\n");
1596 
1597 	adisc = fc_frame_payload_get(in_fp, sizeof(*adisc));
1598 	if (!adisc) {
1599 		rjt_data.reason = ELS_RJT_PROT;
1600 		rjt_data.explan = ELS_EXPL_INV_LEN;
1601 		fc_seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data);
1602 		goto drop;
1603 	}
1604 
1605 	fp = fc_frame_alloc(lport, sizeof(*adisc));
1606 	if (!fp)
1607 		goto drop;
1608 	fc_adisc_fill(lport, fp);
1609 	adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1610 	adisc->adisc_cmd = ELS_LS_ACC;
1611 	fc_fill_reply_hdr(fp, in_fp, FC_RCTL_ELS_REP, 0);
1612 	lport->tt.frame_send(lport, fp);
1613 drop:
1614 	fc_frame_free(in_fp);
1615 }
1616 
1617 /**
1618  * fc_rport_recv_rls_req() - Handle received Read Link Status request
1619  * @rdata: The remote port that sent the RLS request
1620  * @rx_fp: The PRLI request frame
1621  *
1622  * Locking Note: The rport lock is expected to be held before calling
1623  * this function.
1624  */
1625 static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata,
1626 				  struct fc_frame *rx_fp)
1627 
1628 {
1629 	struct fc_lport *lport = rdata->local_port;
1630 	struct fc_frame *fp;
1631 	struct fc_els_rls *rls;
1632 	struct fc_els_rls_resp *rsp;
1633 	struct fc_els_lesb *lesb;
1634 	struct fc_seq_els_data rjt_data;
1635 	struct fc_host_statistics *hst;
1636 
1637 	FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n",
1638 		     fc_rport_state(rdata));
1639 
1640 	rls = fc_frame_payload_get(rx_fp, sizeof(*rls));
1641 	if (!rls) {
1642 		rjt_data.reason = ELS_RJT_PROT;
1643 		rjt_data.explan = ELS_EXPL_INV_LEN;
1644 		goto out_rjt;
1645 	}
1646 
1647 	fp = fc_frame_alloc(lport, sizeof(*rsp));
1648 	if (!fp) {
1649 		rjt_data.reason = ELS_RJT_UNAB;
1650 		rjt_data.explan = ELS_EXPL_INSUF_RES;
1651 		goto out_rjt;
1652 	}
1653 
1654 	rsp = fc_frame_payload_get(fp, sizeof(*rsp));
1655 	memset(rsp, 0, sizeof(*rsp));
1656 	rsp->rls_cmd = ELS_LS_ACC;
1657 	lesb = &rsp->rls_lesb;
1658 	if (lport->tt.get_lesb) {
1659 		/* get LESB from LLD if it supports it */
1660 		lport->tt.get_lesb(lport, lesb);
1661 	} else {
1662 		fc_get_host_stats(lport->host);
1663 		hst = &lport->host_stats;
1664 		lesb->lesb_link_fail = htonl(hst->link_failure_count);
1665 		lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count);
1666 		lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count);
1667 		lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count);
1668 		lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count);
1669 		lesb->lesb_inv_crc = htonl(hst->invalid_crc_count);
1670 	}
1671 
1672 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1673 	lport->tt.frame_send(lport, fp);
1674 	goto out;
1675 
1676 out_rjt:
1677 	fc_seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
1678 out:
1679 	fc_frame_free(rx_fp);
1680 }
1681 
1682 /**
1683  * fc_rport_recv_els_req() - Handler for validated ELS requests
1684  * @lport: The local port that received the ELS request
1685  * @fp:	   The ELS request frame
1686  *
1687  * Handle incoming ELS requests that require port login.
1688  * The ELS opcode has already been validated by the caller.
1689  *
1690  * Locking Note: Called with the lport lock held.
1691  *
1692  * Reference counting: does not modify kref
1693  */
1694 static void fc_rport_recv_els_req(struct fc_lport *lport, struct fc_frame *fp)
1695 {
1696 	struct fc_rport_priv *rdata;
1697 	struct fc_seq_els_data els_data;
1698 
1699 	rdata = fc_rport_lookup(lport, fc_frame_sid(fp));
1700 	if (!rdata) {
1701 		FC_RPORT_ID_DBG(lport, fc_frame_sid(fp),
1702 				"Received ELS 0x%02x from non-logged-in port\n",
1703 				fc_frame_payload_op(fp));
1704 		goto reject;
1705 	}
1706 
1707 	mutex_lock(&rdata->rp_mutex);
1708 
1709 	switch (rdata->rp_state) {
1710 	case RPORT_ST_PRLI:
1711 	case RPORT_ST_RTV:
1712 	case RPORT_ST_READY:
1713 	case RPORT_ST_ADISC:
1714 		break;
1715 	case RPORT_ST_PLOGI:
1716 		if (fc_frame_payload_op(fp) == ELS_PRLI) {
1717 			FC_RPORT_DBG(rdata, "Reject ELS PRLI "
1718 				     "while in state %s\n",
1719 				     fc_rport_state(rdata));
1720 			mutex_unlock(&rdata->rp_mutex);
1721 			kref_put(&rdata->kref, fc_rport_destroy);
1722 			goto busy;
1723 		}
1724 	default:
1725 		FC_RPORT_DBG(rdata,
1726 			     "Reject ELS 0x%02x while in state %s\n",
1727 			     fc_frame_payload_op(fp), fc_rport_state(rdata));
1728 		mutex_unlock(&rdata->rp_mutex);
1729 		kref_put(&rdata->kref, fc_rport_destroy);
1730 		goto reject;
1731 	}
1732 
1733 	switch (fc_frame_payload_op(fp)) {
1734 	case ELS_PRLI:
1735 		fc_rport_recv_prli_req(rdata, fp);
1736 		break;
1737 	case ELS_PRLO:
1738 		fc_rport_recv_prlo_req(rdata, fp);
1739 		break;
1740 	case ELS_ADISC:
1741 		fc_rport_recv_adisc_req(rdata, fp);
1742 		break;
1743 	case ELS_RRQ:
1744 		fc_seq_els_rsp_send(fp, ELS_RRQ, NULL);
1745 		fc_frame_free(fp);
1746 		break;
1747 	case ELS_REC:
1748 		fc_seq_els_rsp_send(fp, ELS_REC, NULL);
1749 		fc_frame_free(fp);
1750 		break;
1751 	case ELS_RLS:
1752 		fc_rport_recv_rls_req(rdata, fp);
1753 		break;
1754 	case ELS_RTV:
1755 		fc_rport_recv_rtv_req(rdata, fp);
1756 		break;
1757 	default:
1758 		fc_frame_free(fp);	/* can't happen */
1759 		break;
1760 	}
1761 
1762 	mutex_unlock(&rdata->rp_mutex);
1763 	kref_put(&rdata->kref, fc_rport_destroy);
1764 	return;
1765 
1766 reject:
1767 	els_data.reason = ELS_RJT_UNAB;
1768 	els_data.explan = ELS_EXPL_PLOGI_REQD;
1769 	fc_seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1770 	fc_frame_free(fp);
1771 	return;
1772 
1773 busy:
1774 	els_data.reason = ELS_RJT_BUSY;
1775 	els_data.explan = ELS_EXPL_NONE;
1776 	fc_seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1777 	fc_frame_free(fp);
1778 	return;
1779 }
1780 
1781 /**
1782  * fc_rport_recv_req() - Handler for requests
1783  * @lport: The local port that received the request
1784  * @fp:	   The request frame
1785  *
1786  * Locking Note: Called with the lport lock held.
1787  *
1788  * Reference counting: does not modify kref
1789  */
1790 void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
1791 {
1792 	struct fc_seq_els_data els_data;
1793 
1794 	/*
1795 	 * Handle FLOGI, PLOGI and LOGO requests separately, since they
1796 	 * don't require prior login.
1797 	 * Check for unsupported opcodes first and reject them.
1798 	 * For some ops, it would be incorrect to reject with "PLOGI required".
1799 	 */
1800 	switch (fc_frame_payload_op(fp)) {
1801 	case ELS_FLOGI:
1802 		fc_rport_recv_flogi_req(lport, fp);
1803 		break;
1804 	case ELS_PLOGI:
1805 		fc_rport_recv_plogi_req(lport, fp);
1806 		break;
1807 	case ELS_LOGO:
1808 		fc_rport_recv_logo_req(lport, fp);
1809 		break;
1810 	case ELS_PRLI:
1811 	case ELS_PRLO:
1812 	case ELS_ADISC:
1813 	case ELS_RRQ:
1814 	case ELS_REC:
1815 	case ELS_RLS:
1816 	case ELS_RTV:
1817 		fc_rport_recv_els_req(lport, fp);
1818 		break;
1819 	default:
1820 		els_data.reason = ELS_RJT_UNSUP;
1821 		els_data.explan = ELS_EXPL_NONE;
1822 		fc_seq_els_rsp_send(fp, ELS_LS_RJT, &els_data);
1823 		fc_frame_free(fp);
1824 		break;
1825 	}
1826 }
1827 EXPORT_SYMBOL(fc_rport_recv_req);
1828 
1829 /**
1830  * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests
1831  * @lport: The local port that received the PLOGI request
1832  * @rx_fp: The PLOGI request frame
1833  *
1834  * Locking Note: The rport lock is held before calling this function.
1835  *
1836  * Reference counting: increments kref on return
1837  */
1838 static void fc_rport_recv_plogi_req(struct fc_lport *lport,
1839 				    struct fc_frame *rx_fp)
1840 {
1841 	struct fc_disc *disc;
1842 	struct fc_rport_priv *rdata;
1843 	struct fc_frame *fp = rx_fp;
1844 	struct fc_els_flogi *pl;
1845 	struct fc_seq_els_data rjt_data;
1846 	u32 sid;
1847 
1848 	sid = fc_frame_sid(fp);
1849 
1850 	FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n");
1851 
1852 	pl = fc_frame_payload_get(fp, sizeof(*pl));
1853 	if (!pl) {
1854 		FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n");
1855 		rjt_data.reason = ELS_RJT_PROT;
1856 		rjt_data.explan = ELS_EXPL_INV_LEN;
1857 		goto reject;
1858 	}
1859 
1860 	disc = &lport->disc;
1861 	mutex_lock(&disc->disc_mutex);
1862 	rdata = fc_rport_create(lport, sid);
1863 	if (!rdata) {
1864 		mutex_unlock(&disc->disc_mutex);
1865 		rjt_data.reason = ELS_RJT_UNAB;
1866 		rjt_data.explan = ELS_EXPL_INSUF_RES;
1867 		goto reject;
1868 	}
1869 
1870 	mutex_lock(&rdata->rp_mutex);
1871 	mutex_unlock(&disc->disc_mutex);
1872 
1873 	rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn);
1874 	rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn);
1875 
1876 	/*
1877 	 * If the rport was just created, possibly due to the incoming PLOGI,
1878 	 * set the state appropriately and accept the PLOGI.
1879 	 *
1880 	 * If we had also sent a PLOGI, and if the received PLOGI is from a
1881 	 * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason
1882 	 * "command already in progress".
1883 	 *
1884 	 * XXX TBD: If the session was ready before, the PLOGI should result in
1885 	 * all outstanding exchanges being reset.
1886 	 */
1887 	switch (rdata->rp_state) {
1888 	case RPORT_ST_INIT:
1889 		FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n");
1890 		break;
1891 	case RPORT_ST_PLOGI_WAIT:
1892 		FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI_WAIT state\n");
1893 		break;
1894 	case RPORT_ST_PLOGI:
1895 		FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n");
1896 		if (rdata->ids.port_name < lport->wwpn) {
1897 			mutex_unlock(&rdata->rp_mutex);
1898 			rjt_data.reason = ELS_RJT_INPROG;
1899 			rjt_data.explan = ELS_EXPL_NONE;
1900 			goto reject;
1901 		}
1902 		break;
1903 	case RPORT_ST_PRLI:
1904 	case RPORT_ST_RTV:
1905 	case RPORT_ST_READY:
1906 	case RPORT_ST_ADISC:
1907 		FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
1908 			     "- ignored for now\n", rdata->rp_state);
1909 		/* XXX TBD - should reset */
1910 		break;
1911 	case RPORT_ST_FLOGI:
1912 	case RPORT_ST_DELETE:
1913 		FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n",
1914 			     fc_rport_state(rdata));
1915 		mutex_unlock(&rdata->rp_mutex);
1916 		rjt_data.reason = ELS_RJT_BUSY;
1917 		rjt_data.explan = ELS_EXPL_NONE;
1918 		goto reject;
1919 	}
1920 	if (!fc_rport_compatible_roles(lport, rdata)) {
1921 		FC_RPORT_DBG(rdata, "Received PLOGI for incompatible role\n");
1922 		mutex_unlock(&rdata->rp_mutex);
1923 		rjt_data.reason = ELS_RJT_LOGIC;
1924 		rjt_data.explan = ELS_EXPL_NONE;
1925 		goto reject;
1926 	}
1927 
1928 	/*
1929 	 * Get session payload size from incoming PLOGI.
1930 	 */
1931 	rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs);
1932 
1933 	/*
1934 	 * Send LS_ACC.	 If this fails, the originator should retry.
1935 	 */
1936 	fp = fc_frame_alloc(lport, sizeof(*pl));
1937 	if (!fp)
1938 		goto out;
1939 
1940 	fc_plogi_fill(lport, fp, ELS_LS_ACC);
1941 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
1942 	lport->tt.frame_send(lport, fp);
1943 	fc_rport_enter_prli(rdata);
1944 out:
1945 	mutex_unlock(&rdata->rp_mutex);
1946 	fc_frame_free(rx_fp);
1947 	return;
1948 
1949 reject:
1950 	fc_seq_els_rsp_send(fp, ELS_LS_RJT, &rjt_data);
1951 	fc_frame_free(fp);
1952 }
1953 
1954 /**
1955  * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests
1956  * @rdata: The remote port that sent the PRLI request
1957  * @rx_fp: The PRLI request frame
1958  *
1959  * Locking Note: The rport lock is expected to be held before calling
1960  * this function.
1961  */
1962 static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
1963 				   struct fc_frame *rx_fp)
1964 {
1965 	struct fc_lport *lport = rdata->local_port;
1966 	struct fc_frame *fp;
1967 	struct {
1968 		struct fc_els_prli prli;
1969 		struct fc_els_spp spp;
1970 	} *pp;
1971 	struct fc_els_spp *rspp;	/* request service param page */
1972 	struct fc_els_spp *spp;	/* response spp */
1973 	unsigned int len;
1974 	unsigned int plen;
1975 	enum fc_els_spp_resp resp;
1976 	struct fc_seq_els_data rjt_data;
1977 	struct fc4_prov *prov;
1978 
1979 	FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
1980 		     fc_rport_state(rdata));
1981 
1982 	len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
1983 	pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1984 	if (!pp)
1985 		goto reject_len;
1986 	plen = ntohs(pp->prli.prli_len);
1987 	if ((plen % 4) != 0 || plen > len || plen < 16)
1988 		goto reject_len;
1989 	if (plen < len)
1990 		len = plen;
1991 	plen = pp->prli.prli_spp_len;
1992 	if ((plen % 4) != 0 || plen < sizeof(*spp) ||
1993 	    plen > len || len < sizeof(*pp) || plen < 12)
1994 		goto reject_len;
1995 	rspp = &pp->spp;
1996 
1997 	fp = fc_frame_alloc(lport, len);
1998 	if (!fp) {
1999 		rjt_data.reason = ELS_RJT_UNAB;
2000 		rjt_data.explan = ELS_EXPL_INSUF_RES;
2001 		goto reject;
2002 	}
2003 	pp = fc_frame_payload_get(fp, len);
2004 	WARN_ON(!pp);
2005 	memset(pp, 0, len);
2006 	pp->prli.prli_cmd = ELS_LS_ACC;
2007 	pp->prli.prli_spp_len = plen;
2008 	pp->prli.prli_len = htons(len);
2009 	len -= sizeof(struct fc_els_prli);
2010 
2011 	/*
2012 	 * Go through all the service parameter pages and build
2013 	 * response.  If plen indicates longer SPP than standard,
2014 	 * use that.  The entire response has been pre-cleared above.
2015 	 */
2016 	spp = &pp->spp;
2017 	mutex_lock(&fc_prov_mutex);
2018 	while (len >= plen) {
2019 		rdata->spp_type = rspp->spp_type;
2020 		spp->spp_type = rspp->spp_type;
2021 		spp->spp_type_ext = rspp->spp_type_ext;
2022 		resp = 0;
2023 
2024 		if (rspp->spp_type < FC_FC4_PROV_SIZE) {
2025 			enum fc_els_spp_resp active = 0, passive = 0;
2026 
2027 			prov = fc_active_prov[rspp->spp_type];
2028 			if (prov)
2029 				active = prov->prli(rdata, plen, rspp, spp);
2030 			prov = fc_passive_prov[rspp->spp_type];
2031 			if (prov)
2032 				passive = prov->prli(rdata, plen, rspp, spp);
2033 			if (!active || passive == FC_SPP_RESP_ACK)
2034 				resp = passive;
2035 			else
2036 				resp = active;
2037 			FC_RPORT_DBG(rdata, "PRLI rspp type %x "
2038 				     "active %x passive %x\n",
2039 				     rspp->spp_type, active, passive);
2040 		}
2041 		if (!resp) {
2042 			if (spp->spp_flags & FC_SPP_EST_IMG_PAIR)
2043 				resp |= FC_SPP_RESP_CONF;
2044 			else
2045 				resp |= FC_SPP_RESP_INVL;
2046 		}
2047 		spp->spp_flags |= resp;
2048 		len -= plen;
2049 		rspp = (struct fc_els_spp *)((char *)rspp + plen);
2050 		spp = (struct fc_els_spp *)((char *)spp + plen);
2051 	}
2052 	mutex_unlock(&fc_prov_mutex);
2053 
2054 	/*
2055 	 * Send LS_ACC.	 If this fails, the originator should retry.
2056 	 */
2057 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
2058 	lport->tt.frame_send(lport, fp);
2059 
2060 	goto drop;
2061 
2062 reject_len:
2063 	rjt_data.reason = ELS_RJT_PROT;
2064 	rjt_data.explan = ELS_EXPL_INV_LEN;
2065 reject:
2066 	fc_seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
2067 drop:
2068 	fc_frame_free(rx_fp);
2069 }
2070 
2071 /**
2072  * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests
2073  * @rdata: The remote port that sent the PRLO request
2074  * @rx_fp: The PRLO request frame
2075  *
2076  * Locking Note: The rport lock is expected to be held before calling
2077  * this function.
2078  */
2079 static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata,
2080 				   struct fc_frame *rx_fp)
2081 {
2082 	struct fc_lport *lport = rdata->local_port;
2083 	struct fc_frame *fp;
2084 	struct {
2085 		struct fc_els_prlo prlo;
2086 		struct fc_els_spp spp;
2087 	} *pp;
2088 	struct fc_els_spp *rspp;	/* request service param page */
2089 	struct fc_els_spp *spp;		/* response spp */
2090 	unsigned int len;
2091 	unsigned int plen;
2092 	struct fc_seq_els_data rjt_data;
2093 
2094 	FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n",
2095 		     fc_rport_state(rdata));
2096 
2097 	len = fr_len(rx_fp) - sizeof(struct fc_frame_header);
2098 	pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
2099 	if (!pp)
2100 		goto reject_len;
2101 	plen = ntohs(pp->prlo.prlo_len);
2102 	if (plen != 20)
2103 		goto reject_len;
2104 	if (plen < len)
2105 		len = plen;
2106 
2107 	rspp = &pp->spp;
2108 
2109 	fp = fc_frame_alloc(lport, len);
2110 	if (!fp) {
2111 		rjt_data.reason = ELS_RJT_UNAB;
2112 		rjt_data.explan = ELS_EXPL_INSUF_RES;
2113 		goto reject;
2114 	}
2115 
2116 	pp = fc_frame_payload_get(fp, len);
2117 	WARN_ON(!pp);
2118 	memset(pp, 0, len);
2119 	pp->prlo.prlo_cmd = ELS_LS_ACC;
2120 	pp->prlo.prlo_obs = 0x10;
2121 	pp->prlo.prlo_len = htons(len);
2122 	spp = &pp->spp;
2123 	spp->spp_type = rspp->spp_type;
2124 	spp->spp_type_ext = rspp->spp_type_ext;
2125 	spp->spp_flags = FC_SPP_RESP_ACK;
2126 
2127 	fc_rport_enter_prli(rdata);
2128 
2129 	fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0);
2130 	lport->tt.frame_send(lport, fp);
2131 	goto drop;
2132 
2133 reject_len:
2134 	rjt_data.reason = ELS_RJT_PROT;
2135 	rjt_data.explan = ELS_EXPL_INV_LEN;
2136 reject:
2137 	fc_seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data);
2138 drop:
2139 	fc_frame_free(rx_fp);
2140 }
2141 
2142 /**
2143  * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests
2144  * @lport: The local port that received the LOGO request
2145  * @fp:	   The LOGO request frame
2146  *
2147  * Locking Note: The rport lock is expected to be held before calling
2148  * this function.
2149  *
2150  * Reference counting: drops kref on return
2151  */
2152 static void fc_rport_recv_logo_req(struct fc_lport *lport, struct fc_frame *fp)
2153 {
2154 	struct fc_rport_priv *rdata;
2155 	u32 sid;
2156 
2157 	fc_seq_els_rsp_send(fp, ELS_LS_ACC, NULL);
2158 
2159 	sid = fc_frame_sid(fp);
2160 
2161 	rdata = fc_rport_lookup(lport, sid);
2162 	if (rdata) {
2163 		mutex_lock(&rdata->rp_mutex);
2164 		FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
2165 			     fc_rport_state(rdata));
2166 
2167 		fc_rport_enter_delete(rdata, RPORT_EV_STOP);
2168 		mutex_unlock(&rdata->rp_mutex);
2169 		kref_put(&rdata->kref, fc_rport_destroy);
2170 	} else
2171 		FC_RPORT_ID_DBG(lport, sid,
2172 				"Received LOGO from non-logged-in port\n");
2173 	fc_frame_free(fp);
2174 }
2175 
2176 /**
2177  * fc_rport_flush_queue() - Flush the rport_event_queue
2178  */
2179 void fc_rport_flush_queue(void)
2180 {
2181 	flush_workqueue(rport_event_queue);
2182 }
2183 EXPORT_SYMBOL(fc_rport_flush_queue);
2184 
2185 /**
2186  * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator.
2187  * @rdata: remote port private
2188  * @spp_len: service parameter page length
2189  * @rspp: received service parameter page
2190  * @spp: response service parameter page
2191  *
2192  * Returns the value for the response code to be placed in spp_flags;
2193  * Returns 0 if not an initiator.
2194  */
2195 static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len,
2196 			     const struct fc_els_spp *rspp,
2197 			     struct fc_els_spp *spp)
2198 {
2199 	struct fc_lport *lport = rdata->local_port;
2200 	u32 fcp_parm;
2201 
2202 	fcp_parm = ntohl(rspp->spp_params);
2203 	rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
2204 	if (fcp_parm & FCP_SPPF_INIT_FCN)
2205 		rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
2206 	if (fcp_parm & FCP_SPPF_TARG_FCN)
2207 		rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
2208 	if (fcp_parm & FCP_SPPF_RETRY)
2209 		rdata->flags |= FC_RP_FLAGS_RETRY;
2210 	rdata->supported_classes = FC_COS_CLASS3;
2211 
2212 	if (!(lport->service_params & FCP_SPPF_INIT_FCN))
2213 		return 0;
2214 
2215 	spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
2216 
2217 	/*
2218 	 * OR in our service parameters with other providers (target), if any.
2219 	 */
2220 	fcp_parm = ntohl(spp->spp_params);
2221 	spp->spp_params = htonl(fcp_parm | lport->service_params);
2222 	return FC_SPP_RESP_ACK;
2223 }
2224 
2225 /*
2226  * FC-4 provider ops for FCP initiator.
2227  */
2228 struct fc4_prov fc_rport_fcp_init = {
2229 	.prli = fc_rport_fcp_prli,
2230 };
2231 
2232 /**
2233  * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0
2234  * @rdata: remote port private
2235  * @spp_len: service parameter page length
2236  * @rspp: received service parameter page
2237  * @spp: response service parameter page
2238  */
2239 static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len,
2240 			    const struct fc_els_spp *rspp,
2241 			    struct fc_els_spp *spp)
2242 {
2243 	if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR)
2244 		return FC_SPP_RESP_INVL;
2245 	return FC_SPP_RESP_ACK;
2246 }
2247 
2248 /*
2249  * FC-4 provider ops for type 0 service parameters.
2250  *
2251  * This handles the special case of type 0 which is always successful
2252  * but doesn't do anything otherwise.
2253  */
2254 struct fc4_prov fc_rport_t0_prov = {
2255 	.prli = fc_rport_t0_prli,
2256 };
2257 
2258 /**
2259  * fc_setup_rport() - Initialize the rport_event_queue
2260  */
2261 int fc_setup_rport(void)
2262 {
2263 	rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
2264 	if (!rport_event_queue)
2265 		return -ENOMEM;
2266 	return 0;
2267 }
2268 
2269 /**
2270  * fc_destroy_rport() - Destroy the rport_event_queue
2271  */
2272 void fc_destroy_rport(void)
2273 {
2274 	destroy_workqueue(rport_event_queue);
2275 }
2276 
2277 /**
2278  * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port
2279  * @rport: The remote port whose I/O should be terminated
2280  */
2281 void fc_rport_terminate_io(struct fc_rport *rport)
2282 {
2283 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
2284 	struct fc_lport *lport = rpriv->local_port;
2285 
2286 	lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
2287 	lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
2288 }
2289 EXPORT_SYMBOL(fc_rport_terminate_io);
2290